NETCOMM LIBERTY™ SERIES - 3G WiFi Router
Table of Contents
1. Introduction ....................................................................................................................................................................................... 5
1.1 Features.................................................................................................................................................................................................................5
1.2 Package Contents..................................................................................................................................................................................................5
1.3 LED Indicators........................................................................................................................................................................................................6
1.4 Rear Panel .............................................................................................................................................................................................................6
2. Quick Setup ....................................................................................................................................................................................... 8
2.1 Setup Procedure....................................................................................................................................................................................................8
3. Web User Interface.......................................................................................................................................................................... 10
3.1 Default Settings....................................................................................................................................................................................................10
3.2 TCP/IP Settings....................................................................................................................................................................................................10
3.3 Login Procedure...................................................................................................................................................................................................14
3.4 Web User Interface Homepage ............................................................................................................................................................................14
4. 3G Settings ...................................................................................................................................................................................... 16
4.1 Setup...................................................................................................................................................................................................................16
4.2 Network Selection................................................................................................................................................................................................17
4.3 PIN Configuration.................................................................................................................................................................................................17
5.Wireless ............................................................................................................................................................................................ 20
5.1 Setup...................................................................................................................................................................................................................20
5.2 Security................................................................................................................................................................................................................21
5.3 Configuration........................................................................................................................................................................................................22
5.4 MAC Filter............................................................................................................................................................................................................23
5.5 Wireless Bridge....................................................................................................................................................................................................24
5.6 Station Info...........................................................................................................................................................................................................24
6. Management.................................................................................................................................................................................... 26
6.1 Device Settings ....................................................................................................................................................................................................26
6.2 Configure SNMP agent ........................................................................................................................................................................................28
6.3 Simple Network Time Protocol (SNTP) .................................................................................................................................................................28
6.4 Access Control.....................................................................................................................................................................................................29
6.5 Save and Reboot .................................................................................................................................................................................................30
7. Advanced Setup.............................................................................................................................................................................. 32
7.1 Local Area Network (LAN) ....................................................................................................................................................................................32
7.2 Network Address Translation (NAT).......................................................................................................................................................................33
7.3 Security................................................................................................................................................................................................................35
7.4 Parental Control ...................................................................................................................................................................................................37
7.5 Routing ................................................................................................................................................................................................................38
7.6 Domain Name Servers (DNS) ...............................................................................................................................................................................39
8. Status............................................................................................................................................................................................... 41
8.1 Diagnostics ..........................................................................................................................................................................................................41
8.2 System Log..........................................................................................................................................................................................................42
8.3 3G Network .........................................................................................................................................................................................................43
8.4 Statistics ..............................................................................................................................................................................................................44
8.5 Route...................................................................................................................................................................................................................45
8.6 ARP .....................................................................................................................................................................................................................45
8.7 Dynamic Host Configuration Protocol (DHCP) ......................................................................................................................................................46
8.8 PING....................................................................................................................................................................................................................46
Appendices.......................................................................................................................................................................................... 48
YML-O-3G19W
3G WiFi Router User Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
Introduction
With the increasing popularity of the 3G/UMTS standard worldwide, this 3G WiFi Router provides you with 3G/UMTS tri-band coverage
through expanding cellular networks throughout the world.
Integrating a Sierra Wireless HSPA module, this router is capable of data downloads at high speeds of up to 7.2Mbps.
To protect your data from unwanted access this router also provides security features such as WiFi Protected Access (WPA) data
encryption, a Firewall and Virtual Private Networks (VPN) pass through.
1.1 Features
•
This 3G WiFi Router allows you to share your 3G connection with multiple wireless or wired devices.
•
Global 3G/UMTS coverage through tri-band HSUPA/HSDPA/UMTS (850/1900/2100MHz), quad-band EDGE/GSM
(850/900/1800/1900 MHz)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Embedded multi-mode HSUPA/HSDPA/UMTS/EDGE/GPRS/GSM module
Four Ethernet LAN 10/100 Mbps connections
Integrated Wireless IEEE 802.11g/54Mbps access point (backward compatible with IEEE 802.11b)
WiFi Protected Access (WPA) / WiFi Protected Access 2 (WPA2) and 802.1x wireless encryption
Static route / Routing Information Protocol (RIP)/RIP v2 routing functions
Media Access Control (MAC) address and IP filtering
Network Address Translation (NAT) / Port Address Translation (PAT)
Supports Virtual Private Network (VPN) Pass-Through
Dynamic Host Configuration Protocol (DHCP) Server/Relay/Client
Domain Name System (DNS) Proxy and Dynamic Domain Name System (DDNS)
Web-based Management
Command Line Interface (CLI) command interface via Telnet
Configuration backup and restoration
Remote configuration
Router and 3G module firmware upgrade
Supports Simple Network Management Protocol (SNMP)
1.2 Package Contents
Your package contains the following:
•
•
•
•
•
•
•
3G19W-AU - 3G WiFi Router
Printed Quick Start Guide
Ethernet Cable
Wireless Security Card
2 x 3G Antennas (Removable)
1 x WiFi Antenna (Removable)
Power Supply
YML-O-3G19W
3G WiFi Router User Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3 LED Indicators
The front panel LED indicators are shown in this illustration and followed by detailed explanations in the table below.
NOTE:
The six LEDs on the front panel display (Internet, 3G, 2G, Low, Med and High) will cycle on and off if PIN code protection is activated. In this case, you should
consult section 4.3.1 PIN Code Protection for further instructions.
LED
COLOUR
MODE
On
DESCRIPTION
Blue
Power On
Power
Off
Power Off
Blue
On
Powered device connected to the associated port (includes devices with wake-on-LAN capability
where a slight voltage is supplied to an Ethernet connection)
No activity, router powered off, no cable or no powered device connected to the associated port.
LAN activity present (traffic in either direction)
The wireless module is ready
LAN 1-4
Off
Flashing
On
Blue
Blue
Blue
Blue
WiFi
Internet
3G
Off
The wireless module is not installed
Flashing
On
WiFi activity present (traffic in either direction)
Internet connection established
Off
No connection to the internet or router powered off
Data being transmitted through the internet connection
Internet connection established
Flashing
On
Off
No connection with UMTS cellular station, no activity or router is powered off
Connecting with UMTS
Flashing
On
Internet connection established
2G
Off
No connection with EDGE, GPRS or GSM cellular station, no activity or router is powered off
Connecting to an EDGE, GPRS or GSM cellular station
Low signal strength
Flashing
On
Blue
Blue
Blue
Low
Off
No activity, router is powered off or higher signal strength found
Medium signal strength
On
Medium
High
Off
No activity, router is powered off or a higher signal strength found
High signal strength
On
Off
No activity, router is powered off, or a lower signal strength found
1.4 Rear Panel
The rear panel contains the ports for data and power connections.
•
•
•
•
•
•
•
•
Main 3G Antenna (removable, SMA connection)
Power jack for DC power input (12VDC / 1.5A)
Power button
USIM card slot
Aux 3G Antenna
WiFi Antenna
Reset button
4 RJ-45 Ethernet Ports
3G WiFi Router User Guide
6
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Quick Setup
2.1 Setup Procedure
These steps explain how to quickly setup your 3G Router:
1. Attach the 3G antennas provided to the ports marked Main and Aux on the back of the router. The antennas should be screwed
on in a clockwise direction.
2. Attach the WiFi antenna provided to the port marked WiFi on the back of the router.
The antennas should be screwed on in a clockwise direction.
3. Insert your SIM card (until you hear a click) into the USIM slot at the back of the Router.
4. Connect the yellow networking cable to one of the LAN ports found at the back of the Router.
5. Connect the other end of the yellow networking cable to the port on your computer.
6. Connect the power adapter to the Power socket on the back of the Router.
7. Plug the power adapter into the wall socket and push the power button into the ON position (in).
8. Configure the router through the Web User Interface (WUI).
NOTE:
Chapters 3 through 8 explain how to setup and use the WUI
9. Save the router configuration and reboot (see section 6.5 Save and Reboot).
Laptop
3G Tower
Smart Phone
Computer
Computer
Computer
Computer
3G WiFi Router User Guide
8
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
Web User Interface
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Web User Interface
This section describes how to access the device via the web user interface using a web browser such as Microsoft Internet Explorer
(version 6.0 or later), Firefox or Safari.
3.1 Default Settings
The following are the default settings for the device.
•
•
•
•
•
•
•
Local (LAN) access (username: admin, password: admin)
Remote (WAN) access (username: support, password: support)
User access (username: user, password: user)
LAN IP address: 192.168.1.1
Remote WAN access: disabled
NAT and firewall: enabled
Dynamic Host Configuration Protocol (DHCP) server on LAN interface: enabled
Technical Note:
During power on, the device initializes all settings to default values. It will then read the configuration profile from the permanent storage section of flash memory. The default
attributes are overwritten when identical attributes with different values are configured. The configuration profile in permanent storage can be created via the web user interface
or telnet user interface, or other management protocols. The factory default configuration can be restored either by pushing the reset button for more than five seconds until the
power indicates LED blinking or by clicking the Restore Default Configuration option in the Restore Default Settings screen.
3.2 TCP/IP Settings
Your computer should automatically obtain an IP Address and join the network. This is because the Dynamic Host Configuration
Protocol (DHCP) server will start automatically when your Router powers up.
The computer should already be configured to use DHCP, but if you are required to configure this, please see the instructions below.
Windows XP:
DHCP Mode:
1. Click on the Start button and go to Settings (or control panel).
2. Double left click on the “Network Connections” control panel item.
3. Right click on the “Local Area Connection” and select “Properties”.
4. Left click on the “Internet Protocol (TCP/IP)” item and then click “Properties”.
5. Make sure “Obtain IP Address automatically” and “Obtain DNS server address automatically” are selected.
3G WiFi Router User Guide
10
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
6. Click OK and then OK again to save these settings.
The IP Address will be automatically assigned from the Router.
STATIC Mode:
If you do not wish to use automatic assignment of IP Addresses and want to configure your network settings manually, your computer
must have a static IP address within the Router’s subnet.
The following steps show how to configure your computer’s IP address within the default subnet of 192.168.1.x:
NOTE:
The default IP address of the router is 192.168.1.1, so the computer must be set with a different IP to the router. In the case below, the computer’s IP address is
set as 192.168.1.2
1. Click on the Start button and go to Settings, then select the control panel (or proceed directly to the control panel).
2. Double left click on the “Network Connections” control panel item.
3. Right click on the “Local Area Connection” and select “Properties”.
4. Left click on the “Internet Protocol (TCP/IP)” item and then click “Properties”.
5. Choose an IP address between 192.168.1.2 — 192.168.1.254 and enter this IP address into the IP Address field.
6. Enter a Subnet mask of 255.255.255.0 and the IP address of the Router (the default IP is 192.168.1.1) into the Default
gateway fields.
7. Enter the IP address of the Router (the default IP is 192.168.1.1) into the Primary DNS field.
8. Click OK and then OK again to save these settings.
Windows Vista/7:
DHCP Mode:
1. Click on the Start button and go to the control panel.
2. Click on “Network and Internet” and then click on “Network and Sharing Centre”.(For Windows Vista)
3. Left click on “Manage Network Connections” from the menu on the left hand side of the window.(For Windows 7)
4. Left click on “Change adapter settings” from the menu on the left hand side of the window.
5. Right click on the “Local Area Connection” item and left click on “Properties”.
6. Left click on “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”.
7. Make sure “Obtain IP Address automatically” and “Obtain DNS server address automatically” are selected.
YML-O-3G19W
3G WiFi Router User Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click OK and then OK again to save these settings.
The IP Address will be automatically assigned from the Router.
STATIC Mode:
If you do not wish to use automatic assignment of IP Addresses and want to configure your network settings manually, your computer
must have a static IP address within the Router’s subnet.
The following steps show how to configure your computer’s IP address within the default subnet of 192.168.1.x:
NOTE:
The default IP address of the router is 192.168.1.1, so the computer must be set with a different IP to the router. In the case below, the computer’s IP address is
set as 192.168.1.2
1. Click on the Start button and go to the control panel.
2. Click on “Network and Internet” and then click on “Network and Sharing Centre”.
(For Windows Vista)
3. Left click on “Manage Network Connections” from the menu on the left hand side of the window.
(For Windows 7)
3. Left click on “Change adapter settings” from the menu on the left hand side of the window.
4. Right click on the “Local Area Connection” item and left click on “Properties”.
5. Left click on “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”.
6. Choose an IP address between 192.168.1.2 — 192.168.1.254 and enter this IP address into the IP Address field.
7. Enter a Subnet mask of 255.255.255.0 and the IP address of the Router (the default IP is 192.168.1.1) into the Default gateway
fields.
8. Enter the IP address of the Router (the default IP is 192.168.1.1) into the Primary DNS field.
9. Click OK and then OK again to save these settings.
MAC OSX 10.4
DHCP Mode:
To set your computer for DHCP mode, perform the following steps:
1. Click on the Apple menu and select “System Properties”.
2. In the System Preferences window, click on the Network icon and select the Ethernet connection.
3. Select “Using DHCP” from the Configure drop down list.
3G WiFi Router User Guide
12
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
4. Click Apply to save these changes.
The IP Address will be automatically assigned from the Router.
STATIC Mode:
If you do not wish to use automatic assignment of IP Addresses and want to configure your network settings manually, your computer
must have a static IP address within the Router’s subnet.
The following steps show how to configure your computer’s IP address within the default subnet of 192.168.1.x:
NOTE:
The default IP address of the router is 192.168.1.1, so the computer must be set with a different IP to the router. In the case below, the computer’s IP address is
set as 192.168.1.2
1. Click on the Apple menu and select System Preferences.
2. In the System Preferences window, click the Network icon and select the Ethernet connection.
(For Windows Vista)
3. From the Configure drop down list, you can set your computer to Static IP mode by selecting to use the “Manually” option.
(For Windows 7)
3. Choose an IP address between 192.168.1.2 — 192.168.1.254 and enter this IP address into the field marked IP Address, and
enter a Subnet Mask of 255.255.255.0
4. Set the Router and DNS Server field to 192.168.1.1 (The Router’s default IP address).
5. Click Apply to save these settings.
YML-O-3G19W
3G WiFi Router User Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Login Procedure
To login to the web interface, follow the steps below:
NOTE:
The default settings can be found in 3.1 Default Settings
the web browser window.
NOTE:
For local administration (i.e. LAN access), the PC running the browser must be attached via Ethernet though not necessarily directly to the device. For remote
access, use the WAN IP address shown on the WUI Homepage screen and login with remote username and password.
2. A dialog box will appear, as illustrated below. Enter the default username and password, as defined in section 3.1 Default
Settings.
3. Click OK to continue.
NOTE:
The login password can be changed later (see 6.4.2 Passwords)
4. After successfully logging in for the first time, you will reach this screen.
3.4 Web User Interface Homepage
The web user interface (WUI) is divided into two window panels, the main menu (on the top) and the display screen (on the bottom). The
main menu has the following options: Basic, 3G Settings, Wireless, Management, Advanced, and Status.
Selecting one of these options will open a submenu with more options. Basic is discussed below while subsequent chapters introduce
the other main menu selections.
NOTE:
The menu options available within the web user interface are based upon the device configuration and user privileges (i.e. local or remote)
BASIC / HOME
The Basic / Home screen is the WUI homepage and the first selection on the main menu. It provides information regarding the firmware,
3G, and IP configuration of the device.
The following table provides further details:
FIELD
DESCRIPTION
Model Name
Board ID
The model name of the Router.
The identification number of the main board.
Gateway Firmware version
Bootloader (CFE) version
Wireless driver version
MAC Address
Network
The firmware version on the device.
The bootloader version of the device.
The wireless driver version of the wireless module.
The MAC address of the Router.
The name of or other reference to the mobile network operator.
Shows the connection status of the current 3G connection.
The radio access technique currently used to enable internet access. It can be HSUPA, HSDPA, UMTS, EDGE, GPRS or Disconnected.
Link
Mode
Signal strength
The mobile network (UMTS or GSM) signal quality available at the device location. This signal quality affects the performance of the unit. If
two or more bars are green, the connection is usually acceptable.
SIM info
Shows the SIM card status on the device.
LAN IP Address
WAN IP Address
Primary DNS Server
Secondary DNS Server
Date/Time
Shows the IP address for the LAN interface.
Shows the IP address for the WAN interface.
Shows the IP address of the primary DNS server.
Shows the IP address of the secondary DNS server.
The time according to the device’s internal clock
3G WiFi Router User Guide
14
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
3G Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
4. 3G Settings
Select your 3G Mobile Broadband service settings according to predefined or custom profiles. Setup instructions are provided in the
following sections for your assistance.
This menu includes 3G Mobile Broadband service Setup, Network Selection and PIN Configuration.
4.1 Setup
NOTE:
Sections 8.3 and 8.4.2 also provide information about the 3G Mobile Broadband service.
Your Service Provider will provide the information required to complete the first time setup instructions below. This includes profile,
username and password. Only complete those steps for which you have information and skip the others.
1. If your SIM card is not inserted into the Router, then do so now.
2. Type the APN in the APN field. Authentication Method should be provided by your Internet service provider; or just leave it set to
AUTO if not required. If you have not received a username and password, leave these fields empty.
Select IP compression and Data compression to be ON or OFF. By default they are set to off.
3. Click the Save button to save the new settings.
4. Press the Connect button to reboot the router and to connect to Internet. After reboot, the Device Info for
The 3G network box in the WUI Basic screen should indicate an active connection, as shown below. The 3G and Internet LEDs on the
front panel of the Router should also be blinking.
If the LEDs are off, then either your profile settings are incorrect, the SIM card is not working or the service network is unavailable. In
either case, contact Technical Support for further instructions.
NOTE:
If the LEDs light up in an on/off pattern moving from left to right this indicates that your SIM is PIN Locked; please see the 4.3.1 PIN Lock Off section for instructions
on how to fix this.
3G WiFi Router User Guide
16
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
4.2 Network Selection
This screen allows for automatically or manually selecting the 3G Mobile Broadband service to use.
Auto - To automatically connect to the appropriate available 3G service.
Manual - To manually select which 3G service to attempt to connect to.
You can click “Scan Network” to scan for available 3G services around you and select your chosen 3G service.
Click Save/Apply to save any changes you have made.
4.3 PIN Configuration
This screen allows for changes to the 3G SIM card PIN code protection settings.
NOTE:
If you have entered the incorrect PIN 3 times, your SIM card will be locked for your security. Please call your 3G service provider for assistance.
4.3.1 PIN Code Protection
PIN code protection prevents the use of a SIM card by unauthorized persons. To use the 3G Mobile Broadband service with this router
however, the PIN code protection must be disabled. If the SIM card inserted into the router is locked with a PIN code, the web user
interface will display the following screen after login.
PIN Lock Off
If you wish to connect to the Internet using a PIN locked SIM card, you must first turn PIN code protection Off. Select PIN lock Off,
enter the PIN Code twice. Please keep in mind you only have 3 attempts before your SIM card is locked. The remaining attempts’
number shows how many attempts left. Contact your service provider if you require assistance. You can set Remember PIN Code to ON
so you don’t need to input the PIN code every time when the router turns on. Afterwards, click Apply. The following dialog box should
now appear.
YML-O-3G19W
3G WiFi Router User Guide
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PIN Lock On
After you are finished using your SIM card for Internet service, you may wish to lock it again. In this case, first go to the 3G Settings - PIN
Configuration screen, as shown below. Select PIN lock ON and enter the PIN code twice. You can set Remember PIN code to Yes so
you don’t need to input the PIN code every time when the router turns on.
You can now return your SIM card to your cellular phone or other mobile device.
4.3.2 PIN Code Change
If you wish to change your PIN code for greater security, enable the PIN Code protection. Go to the previous section and follow the
procedure listed under PIN Lock On.
After locking the SIM card, select PIN Code Change and enter your Old and New PIN codes in the fields provided. Keep in mind you
only have 3 attempts before your SIM card is locked. The remaining attempts’ number shows how many attempts are left. Contact your
3G Carrier if you require assistance.
Click Apply to activate the change.
NOTE:
If you forget to change the PIN Code without first turning on PIN lock protection, you will see this dialog box as a helpful reminder.
If your PIN Code change request was successful the following dialog box will display.
3G WiFi Router User Guide
18
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless
Download from Www.Somanuals.com. All Manuals Search And Download.
5.Wireless
The Wireless submenu provides access to Wireless Local Area Network (LAN) configuration settings including:
•
•
•
•
•
Wireless network name
Channel restrictions (based on country)
Security
Access point or bridging behaviour
Station information
5.1 Setup
This screen allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface,
hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country
requirements. The Wireless Guest Network function adds extra networking security when connecting to remote hosts.
OPTION
DESCRIPTION
Enable Wireless
A checkbox that enables (default) or disables the wireless LAN interface. When selected, the WebUI displays Hide
Access point, SSID, BSSID and Country settings.
Hide Access Point
Select Hide Access Point to protect the access point from detection by wireless active scans. To check AP status
in Windows XP, open Network Connections from the start Menu and select View Available Network Connections. If
the access point is hidden, it will not be listed there. To connect a client to a hidden access point, the station must
add the access point manually to its wireless configuration.
SSID [1 - 32 characters]
BSSID
Sets the wireless network name. SSID stands for Service Set Identifier. All stations must be configured with the
correct SSID to access the WLAN. If the SSID does not match, that user will not be granted access.
The BSSID is a 48 bit identity used to identify a particular BSS (Basic Service Set) within an area. In Infrastructure
BSS networks, the BSSID is the MAC (Media Access Control) address of the AP (Access Point) and in
Independent BSS or adhoc networks, the BSSID is generated randomly.
Country
A drop-down menu that permits worldwide and specific national settings.
Wireless Guest
The Guest SSID (Virtual Access Point) can be enabled by selecting the Enable Wireless Guest Network checkbox
You can rename, hide or limit the number of users of the Wireless Guest Network as needed.
Prevent wireless clients from communicating with each other
Clients Isolation
NOTE:
Wireless hosts cannot scan Guest SSIDs.
3G WiFi Router User Guide
20
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
5.2 Security
This Router includes a number of security options that provides you with a secure connection to a 3G network. State-of-the art security
includes:
•
•
•
•
•
WEP / WPA / WPA2 data encryption
SPI Firewall
VPN Pass-Through
MAC address IP filtering
Authentication protocols — PAP / CHAP
You can also authenticate or encrypt your service using the WEP algorithm, which provides protection against unauthorized access such
as eavesdropping.
By default, WPA-PSK security is specified for the Network authentication type in use.
The following screen appears when Security is selected. The Security page allows you to configure security features of your Router’s
wireless LAN interface. You can set the network authentication method, select data encryption, specify whether a network key is
required to authenticate to this wireless network and specify the encryption strength.
Click Save/Apply to configure the wireless security options.
OPTION
DESCRIPTION
Select SSID
Your Service Set Identifier (SSID), sets your Wireless Network Name. You can connect multiple devices
including Laptops, Desktop PCs and PDAs to your Wireless Router. To get additional devices connected,
scan for a network, and locate the SSID shown on your Wireless Security Card. If the SSID does not match,
access is denied.
Network Authentication
WEP Encryption
This option is used for authentication to the wireless network. Each authentication type has its own settings.
(For example, selecting 802.1X authentication will reveal the RADIUS Server IP address, Port and Key fields.
WEP Encryption will also be enabled)
This option indicates whether data sent over the network is encrypted. The same network key is used for data
encryption and network authentication. Whilst four network keys can be defined, only one can be used at
anyone time. Use the network key found in the drop-down list.
Encryption Strength
This drop-down list box will display when WEP Encryption is enabled. The key strength is proportional to the
number of binary bits comprising the key. This means that keys with a greater number of bits have a greater
degree of security and are considerably more difficult to crack.
Encryption strength can be set to either 64-bit or 128-bit. A 64-bit key is equivalent to 5 ASCII characters or
10 hexadecimal numbers. A 128-bit key contains 13 ASCII characters or 26 hexadecimal numbers.
NOTE:
Each key contains a 24-bit header (an initiation vector) which enables parallel decoding of multiple streams of encrypted data.
Click Apply/Save to save any changes you have made to your Wireless security.
Please note: You will need to reconfigure and reconnect any wirelessly connected devices after changing the security on your
wireless network.
YML-O-3G19W
3G WiFi Router User Guide
21
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 Configuration
The following screen appears when you select Configuration. This screen allows you to control the following advanced features of the
Wireless Local Area Network (WLAN) interface:
•
•
•
•
•
•
•
•
Select the channel which you wish to operate from
Force the transmission rate to a particular speed
Set the fragmentation threshold
Set the RTS threshold
Set the wake-up interval for clients in power-save mode
Set the beacon interval for the access point
Set Xpress mode
Program short or long preambles
Click Save/Apply to set the advanced wireless configuration.
OPTION
DESCRIPTION
Band
The new amendment allows IEEE802.11g units of all types to fallback to speeds of 11Mbps, so IEEE 802.11b and IEEE
802.11g devices can coexist in the same network.
Channel
Allows selection of a specific channel (1 - 1 1) or Automode.
The Auto Channel times the length it takes to scan in minutes.
Auto Channel Timer
(mins)
54g Rate
In Auto (default) mode, your Router uses the maximum data rate and lowers the data rate dependent on the signal strength.
The appropriate setting is dependent on signal strength. Other rates are discreet values between 1 to 54 Mbps.
Multicast Rate
Basic Rate
Setting for multicast packet transmission rate. (1-54Mbps)
Sets basic transmission rate.
Fragmentation
Threshold
A threshold (in bytes) determines whether packets will be fragmented and at what size. Packets that exceed the
fragmentation threshold of an 802.11 WLAN will be split into smaller units suitable for the network. Packets smaller than the
specified fragmentation threshold value are not fragmented. Values between 256 and 2346 can be entered but this should
remain at a default setting of 2346. Setting the Fragmentation Threshold too low may result in poor performance.
RTS Threshold
DTIM Interval
Request To Send (RTS) specifies the packet size that exceeds the specified RTS threshold, which then triggers the RTS/CTS
mechanism. Smaller packets are sent without using RTS/CTS. The default setting of 2347 (maxlength) will disable the RTS
Threshold.
Delivery Traffic Indication Message (DTIM) is also known as Beacon Rate. The entry range is a value between 1 and 65535.
A DTIM is a countdown variable that informs clients of the next window for listening to broadcast and multicast messages.
When the AP has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM
Interval value. A PC clients hear the beacons and awaken to receive the broadcast and multicast messages. The default is 1.
Beacon Interval
The amount of time between beacon transmissions is in milliseconds. The default is 100 and the acceptable range is 1—
65535. The beacon transmissions identify the presence of an access point. By default, network devices passively scan all RF
channels listening for beacons coming from access points. Before a station enters power save mode, the station needs the
beacon interval to know when to wake up to receive the beacon.
Xpress™ Technology Broadcom’s Xpress™ Technology is compliant with draft specifications of two planned wireless industry standards. It has
been designed to improve wireless network efficiency. Default is disabled.
54g Mode
Select Auto mode for greatest compatibility. Select Performance mode for the fastest performance among 54g certified
equipment. Select LRS mode if you are experiencing difficulty with legacy 802.1 1b equipment. If this does not work, you
may also try 802.11b only mode.
54g Protection
Preamble Type
Transmit Power
In Auto mode, the router will use RTS/CTS to improve 802.11g performance in mixed 802.11g / 802.11b networks. Turning
protection Off will maximize 802.11g throughput under most conditions.
Short preamble is intended for applications where maximum throughput is desired but it does not work with legacy
equipment. Long preamble works with the current 1 and 2 Mbit/s DSSS specification as described in IEEE Std 802.11-1999
Set the power output (by percentage) as desired.
3G WiFi Router User Guide
22
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
5.4 MAC Filter
This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted based upon the
unique 48-bit MAC address.
To add a MAC Address filter, click the Add button as shown below.
To delete a filter, select it from the table below and click the Remove button.
FEATURE
DESCRIPTION
MAC Restrict Mode
Disabled — Disables MAC filtering
Allow — Permits access for the specified MAC addresses.
NOTE: Add a wireless device’s MAC address before clicking the Allow radio button
or else you will need to connect to the Router’s web user interface using the supplied
yellow Ethernet cable and add the wireless device’s MAC address.
Deny — Rejects access for the specified MAC addresses.
MAC Address
Lists the MAC addresses subject to the MAC Restrict Mode. The Add button
prompts an entry field that requires you type in a MAC address in a two character,
6-byte convention: xx:xx:xx:xx:xx:xx where xx are hexadecimal numbers. A
maximum of 60 MAC addresses can be added.
Enter the MAC address on the screen below and click Save/Apply.
YML-O-3G19W
3G WiFi Router User Guide
23
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5 Wireless Bridge
The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to configure the wireless
bridge features of the wireless LAN interface.
A wireless bridge is utilised to extend your WiFi network coverage and enable distant computers to access network resources.
Click Save/Apply to implement new configuration settings.
FEATURE
DESCRIPTION
AP Mode
Selecting Wireless Bridge (or Wireless Distribution System) disables Access Point (AP)
functionality. Selecting AP enables Access Point mode, wireless bridge functionality will
still be available and wireless stations will be able to associate to the AP.
Selecting Enabled or Enabled (Scan) allows wireless bridge restriction. Only those bridges
selected in “Remote Bridges” will be granted access. Enabled (Scan) scans the detected
wireless networks and allows you to select one to connect to. Click Refresh to update the
station list when Enabled (Scan) is selected.
Bridge Restrict
5.6 Station Info
The following screen appears when you select Station Info, and shows authenticated wireless stations and their status. Click the Refresh
button to update the list of stations in the WLAN.
FEATURE
MAC
DESCRIPTION
This shows the unique 48-bit MAC address of wireless clients
Lists all the stations that are associated with the Access Point, along with the
amount of time since packets were transferred to and from each station. If a station
is idle for too long, it is removed from this list.
Associated
Authorized
Lists those devices with authorized access.
3G WiFi Router User Guide
24
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
Management
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Management
The Management menu has the following maintenance functions and processes:
•
•
•
•
•
6.1 Device Settings
6.2 Simple Network Management Protocol (SNMP)
6.3 Simple Network Time Protocol (SNTP)
6.4 Access Control
6.5 Save and Reboot
6.1 Device Settings
The Device Settings screens allow you to backup, retrieve and restore the default settings of your Router. It also provides a function for
you to update your Routers firmware.
6.1.1 Backup Settings
The following screen appears when Backup is selected. Click the Backup Settings button to save the current configuration settings. You
will be prompted to define the location of the backup file to save to your PC.
6.1.2 Update Settings
The following screen appears when selecting Update from the submenu. By clicking on the Browse button, you can locate a previously
saved filename as the configuration backup file. Click on the Update settings to load it.
3G WiFi Router User Guide
26
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
6.1.3 Restore Default
The following screen appears when selecting Restore Default. By clicking on the Restore Default Settings button, you can restore your
Routers default firmware settings. To restore system settings, reboot your Router
NOTE:
The default settings can be found in section 3.1 Default Settings.
Once you have selected the Restore Default Settings button, the following screen will appear. Close the window and wait 2 minutes
before reopening your browser. If required, reconfigure your PCs IP address to match your new configuration (see section 3.2 TCP/IP
Settings for details).
After a successful reboot, the browser will return to the Device Info screen. If the browser does not refresh to the default screen, close
and restart the browser.
NOTE:
The Restore Default function has the same effect as the reset button. The device board hardware and the boot loader support the reset to default button. If the
reset button is continuously pushed for more than 5 seconds (and not more than 12 seconds), the boot loader will erase the configuration settings saved on flash
memory.
6.1.4 Update Firmware
The following screen appears when selecting Update Firmware. By following the steps on the page, you can update your Routers
firmware. Manual device upgrades from a locally stored file can also be performed.
1. Obtain an updated software image file.
2. Enter the path and filename of the firmware image file in the Software File Name field or click the Browse button to locate the
image file.
3. Click the Update Firmware button once to upload and install the file.
NOTE:
The update process will take about 2 minutes to complete. The Router will reboot and the browser window will refresh to the default screen upon successful
installation.
It is recommended that you compare the Software Version at the top of the Basic screen (WUI homepage) with the firmware version
installed, to confirm the installation was successful.
YML-O-3G19W
3G WiFi Router User Guide
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Configure SNMP agent
The Simple Network Management Protocol (SNMP) allows a network administrator to monitor a network by retrieving settings on remote
network devices. To do this, the administrator typically runs an SNMP management station program such as MIB browser on a local
host to obtain information from the SNMP agent, in this case the 3G19W-AU (if SNMP is enabled). An SNMP ‘community’ performs
the function of authenticating SNMP traffic. A ‘community name’ acts as a password that is typically shared among SNMP agents and
managers.
By default, SNMP agent is enabled on the router.
Setting up SNMP agent
interface.
2. The login username and password by default is admin/admin.
3. Go to Management> SNMP.
4. Enable SNMP agent and set up all options according to your requirements.
5. Press Save/Apply to activate the settings.
6.3 Simple Network Time Protocol (SNTP)
This screen allows you to configure the time settings of your Router. To automatically synchronize with Internet timeservers, tick the box
as illustrated below.
The following options should now appear:
First NTP timeserver:
Second NTP timeserver:
Time zone offset:
Select the required server.
Select second timeserver, if required.
Select the local time zone.
Configure these options and then click Save/Apply to activate.
NOTE:
SNTP must be activated to use Parental Control (see section 7.4).
3G WiFi Router User Guide
28
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
6.4 Access Control
The Access Control option found in the Management drop down menu, configures access related parameters in the following areas:
•
•
Services
Passwords
Access Control is used to control local and remote management settings for your Router.
6.4.1 Services
The Service Control List (SCL) allows you to enable or disable your Wide Area Network (WAN) services by ticking the checkbox as
illustrated below. The following access services are available: FTP, HTTP, ICMP, SNMP, TELNET, and TFTP.
Enable or disable these options are per your requirements.
Click Save/Apply to continue.
6.4.2 Passwords
The Passwords option configures your account access password for your Router. Access to the device is limited to the following three
user accounts:
•
•
•
admin is to be used for local unrestricted access control
support is to be used for remote maintenance of the device
user is to be used to view information and update device firmware
Use the fields illustrated in the screen below to change or create your password. Passwords must be 16 characters or less with
no spaces.
Click Save/Apply to continue.
YML-O-3G19W
3G WiFi Router User Guide
29
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5 Save and Reboot
This function saves the current configuration settings and reboots your Router.
NOTE 1:
It may be necessary to reconfigure your TCP/IP settings to adjust for the new configuration. For example, if you disable the Dynamic Host Configuration Protocol
(DHCP) server you will need to apply Static IP settings on your connected devices.
NOTE 2:
If you lose all access to your web user interface, simply press the reset button on the rear panel for 5-7 seconds to restore the default settings.
3G WiFi Router User Guide
30
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Advanced Setup
This chapter explains the advanced setup options for your Router:
7.1 Local Area Network (LAN)
This screen allows you to configure the Local Area Network (LAN) interface on your Router.
See the field descriptions below for more details.
OPTION
DESCRIPTION
IP Address
Enter the IP address for the LAN interface
Subnet Mask
Enable UPnP
Enable Half-Bridge
Enter the subnet mask for the LAN interface
Tick the box to enable Universal Plug and Play
The Router can be setup as a half-transparent bridge to cope with some special applications
such as VPN pass-through. By default half-bridge is off..
Select Enable DHCP server and enter your starting and ending IP addresses and the lease
time. This setting configures the router to automatically assign the IP address, default
gateway and DNS server addresses to every DHCP client on your LAN.
These options are used for special DHCP setup.
Dynamic Host Configuration Protocol
(DHCP) Server
Option 42, 66, 150, 160
Static IP Lease List
To specify the IP address assigned through DHCP according to the MAC address of the
hosts connected to the router.
Configure a second IP address by ticking the checkbox shown below and enter the following information:
IP Address:
Enter the secondary IP address for the LAN interface.
Subnet Mask:
Enter the secondary subnet mask for the LAN interface.
NOTE:
The Save button saves new settings to allow continued configuration, while the Save/Reboot button not only saves new settings but also reboots the device to
apply the new configuration (i.e. all new settings).
3G WiFi Router User Guide
32
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
7.2 Network Address Translation (NAT)
7.2.1 Port Forwarding
Port Forwarding allows you to direct incoming traffic from the Internet side (identified by Protocol and External port) to the internal server
with a private IP address on the LAN side. The Internal port is required only if the external port needs to be converted to a different port
number used by the server on the LAN side. A maximum of 32 entries can be configured.
To add a Virtual Server, click the Add button. The following screen will display.
OPTION
DESCRIPTION
Select a Service
Custom Server
Server IP Address
External Port Start
Select a predefined service to port forward. Or
Create a custom server and enter a name for it.
Enter the IP address for the server.
Enter the starting external port number (when you select Custom Server). When a
predefined service is selected the port ranges are automatically configured.
Enter the ending external port number (when you select Custom Server). When a
predefined service is selected the port ranges are automatically configured.
User can select from: TCP, TCP/UDP or UDP.
External Port End
Protocol
Internal Port Start
Enter the internal port starting number (when you select Custom Server). When a
predefined service is selected the port ranges are automatically configured.
Enter the internal port ending number (when you select Custom Server). When a
predefined service is selected the port ranges are automatically configured.
Internal Port End
7.2.2 Port Triggering
Some applications require specific ports in the Router’s firewall to be open for access by remote parties. Port Triggering opens up the
‘Open Ports’ in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the ‘Triggering
Ports’. The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side
using the ‘Open Ports’. A maximum 32 entries can be configured.
YML-O-3G19W
3G WiFi Router User Guide
33
Download from Www.Somanuals.com. All Manuals Search And Download.
To add a Trigger Port, simply click the Add button. The following will be displayed.
OPTION
DESCRIPTION
Select an Application
Select a predefined service to port trigger on.
Or
Custom Application
Trigger Port Start
Create a custom server and enter a name for it.
Enter the starting trigger port number (when you select custom application).
When an application is selected , the port ranges are automatically
configured.
Trigger Port End
Enter the ending trigger port number (when you select custom application).
When an application is selected, the port ranges are automatically configured.
Trigger Protocol
Open Port Start
TCP, TCP/UDP or UDP.
Enter the starting open port number (when you select custom application).
When an application is selected, the port ranges are automatically configured.
Open Port End
Enter the ending open port number (when you select custom application).
When an application is selected, the port ranges are automatically configured.
Open Protocol
TCP, TCP/UDP or UDP.
7.2.3 Demilitarized (DMZ) Host
Your Router will forward IP packets from the Wireless Area Network (WAN) that do not belong to any of the applications configured in the
Virtual Servers table to the DMZ host computer.
Enter the computer’s IP address and click Apply to activate the DMZ host. Clear the IP address field and click Apply to deactivate the
DMZ host.
3G WiFi Router User Guide
34
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
7.3 Security
Your Router can be secured with incoming or outgoing IP Filtering. This allows you to control whether data can enter or leave via
the router.
7.3.1 IP Filtering
The IP Filtering screen sets filter rules that limit incoming and outgoing IP traffic. Multiple filter rules can be set with at least one limiting
condition. All conditions must be fulfilled when individual IP packets pass filter.
Outgoing IP Filter
The default setting for Outgoing traffic is ACCEPTED. Under this condition, all outgoing IP packets that match the filter rules will be
BLOCKED.
To add a filtering rule, click the Add button. The following screen will display.
OPTION
DESCRIPTION
Filter Name
The Filter rule label.
Protocol
TCP, TCP/UDP, UDP or ICMP traffic.
Enter source IP address.
Source IP address
Source Subnet Mask
Source Port (port or port:port)
Destination IP adress
Destination Subnet Mask
Destination port (port or port:port)
Enter source Subnet mask.
Enter source port number or port range.
Enter destination IP address.
Enter destination subnet mask.
Enter destination port number or range.
Click Save/Apply to save and activate the filter.
YML-O-3G19W
3G WiFi Router User Guide
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Incoming IP Filter
The default setting for all Incoming traffic is BLOCKED. Under this condition only those incoming IP packets that match the filter rules
will be ACCEPTED.
To add a filtering rule, click the Add button. The following screen will display.
NOTE:
Please refer to the Outgoing IP Filter table for field descriptions.
Click Save/Apply to save and activate the filter.
3G WiFi Router User Guide
36
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
7.4 Parental Control
Parental Control allows you to restrict access from a Local Area Network (LAN) to an outside network through the Router on selected
days and/or at certain times. Make sure to activate the Internet Time server synchronization (see section 6.3 SNTP), so that the
scheduled times match your local time.
7.4.1 Time of Day Restrictions
This enables you to select a time of the day to impose or relax any network restrictions you have in place.
Click Add to display the following screen.
OPTION
DESCRIPTION
User Name
A user-defined label for this restriction.
MAC address of the PC running the browser.
MAC address of another LAN device.
The days the restrictions apply.
The time the restrictions start.
The time the restrictions end.
Browser’s MAC Address
Other MAC Address
Days of the Week
Start Blocking Time
End Blocking Time
Click Save/Apply to save and activate the parental control entered.
YML-O-3G19W
3G WiFi Router User Guide
37
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4.2 URL Filter
This enables you to allow or prevent access to specific websites based on the address being entered to access it.
Select either “To Block” or “To Allow” depending on your current IP Filtering (see section 7.3 Security) as per the screenshot below.
You can then click “Add” to add a new URL filter.
You can then enter the URL and the port number as prompted on the page to enter a new URL filter and click “Save/Apply”.
7.5 Routing
Static Route settings can be found in the Routing link as illustrated below.
7.5.1 Static Route
The Static Route screen displays the configured static routes. Click the Add or Remove buttons to change settings.
Click Add to display the following screen.
Enter the Destination Network Address, Subnet Mask, Gateway IP Address and/or WAN Interface.
Click Save/Apply to add the entry to the routing table.
3G WiFi Router User Guide
38
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
7.6 Domain Name Servers (DNS)
If the Enable Automatic Assigned DNS checkbox is selected, this device will accept the first received DNS assignment from the Wide
Area Network (WAN) interface during the connection process. If the checkbox is not selected, a field will appear allowing you to enter the
primary and optional secondary DNS server IP addresses.
Click on Save to apply.
NOTE:
To make the new configuration effective, reboot your Router.
7.6.1 Dynamic DNS
The Dynamic DNS service allows a dynamic IP address to be aliased to a static hostname in any of a selection of domains allowing the
router to be more easily accessed from various locations on the internet.
NOTE:
The Add/Remove buttons will be displayed only if the router has been assigned an IP address from the remote server.
To add a dynamic DNS service, click the Add button and the following screen will display.
OPTION
DESCRIPTION
D-DNS provider
Hostname
Interface
Select a dynamic DNS provider from the list.
Enter the name for the dynamic DNS server.
Select the interface from the list.
Username
Password
Enter the username for the dynamic DNS server.
Enter the password for the dynamic DNS server.
YML-O-3G19W
3G WiFi Router User Guide
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Status
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
8. Status
The Status menu has the following submenus:
•
•
•
•
•
•
•
•
Diagnostics
System Log
3G network
Statistics
Route
ARP
DHCP
PING
8.1 Diagnostics
The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below. If a test displays a
fail status:
1. Click on the Help link
2. Now click Re-run Diagnostic Tests at the bottom of the screen to re-test and confirm the error
3. If the test continues to fail, follow the troubleshooting procedures on the Help screen.
OPTION
DESCRIPTION
Test your ENET (1-4) Connection
Pass: Indicates that the Ethernet interface from your computer is connected to the LAN port of
this Router.
Fail: Indicates that the Router does not detect the Ethernet interface on your computer.
Pass: Indicates that the wireless card is ON.
Test your Wireless connection
Down: Indicates that the wireless card is OFF.
Ping Primary Domain Name Server
Pass: Indicates that the Router can communicate with the primary Domain Name Server (DNS).
Fail: Indicates that the Router was unable to communicate with the primary Domain Name
Server (DNS). It may not have an effect on your Internet connectivity.
Therefore if this test fails but you are still able to access the Internet there is no need to
troubleshoot this issue.
YML-O-3G19W
3G WiFi Router User Guide
41
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2 System Log
This function allows you to view system events and configure related options. Follow the steps below to enable and view the
System Log.
1. Click Configure System Log to continue.
2. Select the system log options (see table below) and click Save/Apply.
OPTION
DESCRIPTION
Log
Indicates whether the system is currently recording events. You can enable or disable event logging. By default, it is
disabled.
Log level
Allows you to configure the event level and filter out unwanted events below this level. The events ranging from the
highest critical level “Emergency” down to this configured level will be recorded to the log buffer on the Router’s
SDRAM. When the log buffer is full, the newest event will wrap up to the top of the log buffer and overwrite the oldest
event. By default, the log level is “Debugging”, which is the lowest critical level. The log levels are defined as follows:
Emergency is the most serious event level, whereas Debugging is the least important.
For instance, if the log level is set to Debugging, all the events from the lowest Debugging level to the most critical level
Emergency level will be recorded. If the log level is set to Error, only Error and the level above will be logged.
Allows you to select the logged events and displays on the View System Log window for events of this level and above
to the highest Emergency level.
Display Level
Mode
Allows you to specify whether events should be stored in the local memory, be sent to a remote syslog server, or to
both simultaneously.
If remote mode is selected, the view systemlog will not be able to display events saved in the remote syslog server.
When either Remote mode or Both mode is configured, the WEB UI will prompt you to enter the Server IP address and
Server UDP port.
3. Click View System Log. The results are displayed as follows.
3G WiFi Router User Guide
42
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
8.3 3G Network
Select this option for detailed status information on your Routers 3G connection.
Consult the table for detailed field descriptions.
OPTION
Manufacturer
Model
DESCRIPTION
The manufacturer of the embedded 3G module .
The model name of the embedded 3G module.
FW Rev
IMEI
The firmware version of the 3G module.
The IMEI (International Mobile Equipment Identity) is a 15 digit number that is used to identify a mobile device on a network.
Factory Serial Number of the 3G module.
FSN
IMSI
The IMSI (International Mobile Subscriber Identity) is a unique 15 digit number used to identify an individual user on a GSM or
UMTS network.
HW Rev.
The hardware version of the 3G module.
System Mode
WCDMA band
WCDMA/Europe CDMA 2000/America
The 3G radio frequency band which supports tri-band UTMS/HSDPA/HSUPA frequencies (850/1900/2100MHz), IMT2000 is
2100MHz, WCDMA800 is 850MHz,WCDMA1900 is 1900 MHz.
The 3G channel.
WCDMA channel
GMM band
The 2G radio frequency band which supports Quad-band GSM/GRPS frequencies, including GSM850, GSM900, DCS1800,
PCS1900 with each number representing the respective frequency in MHz.
Packet Switching state.
GMM (PS) state
MM (CS) state
Circuit Switching state.
Signal Strength
The 3G/2G service signal strength in dBm.
Signal Level (RSSI)
Quality (Ec/Io)
3G Radio Signal Strength Index.
The total energy per chip per power density (Ec/lo) value of the active set’s three strongest cells.
Should display as registered with a valid unlocked SIM card.
The 3G internet Service Provider.
Network Registration Status
Network Name
Country Code
Each country has a unique code.
Network Code
Each network has a unique code.
Cell ID
The network information for the “serving” cell ID.
Primary Scrambling Code (PSC)
Data Session Status
HSUPA Category
HSDPA Category
Received Signal Code Power (RSCP)
The PSC of the reference WCDMA cell
Connected or Disconnected.
The HSUPA categories correspond to different data transmission rates with higher numbers generally indicating faster rates.
The HSDPA categories correspond to different incoming data rates with higher numbers generally indicating faster rates.
The RSCP of the active set’s three strongest cells.
YML-O-3G19W
3G WiFi Router User Guide
43
Download from Www.Somanuals.com. All Manuals Search And Download.
8.4 Statistics
These screens provide detailed information for:
•
Local Area Network (LAN) and Wireless Local Area Network (WLAN)
•
3G Interfaces
NOTE:
These statistics page refresh every 15 seconds.
8.4.1 LAN Statistics
This screen displays statistics for the Ethernet and Wireless LAN interfaces.
INTERFACE
Shows connection interfaces
Received/Transmitted
Bytes
Pkts
Rx/TX (receive/transmit) packets in bytes
Rx/TX (receive/transmit) packets
Errs
Rx/TX (receive/transmit) packets with errors
Rx/TX (receive/transmit) packets dropped
Drops
8.4.2 3G Statistics
Click 3G network in the Statistics submenu to display the screen below.
Inbound Octets
Number of received octets over the interface.
Packets
Drops
Error
Number of received packets over the interface.
Received packets which are dropped.
Received packets which are errors.
Outbound Octets
Number of transmitted octets over the interface.
Packets
Drops
Error
Number of transmitted packets over the interface.
Transmitted packets which are dropped.
Transmitted packets which are errors.
3G WiFi Router User Guide
44
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
8.5 Route
Select Route to display the paths the Router has found or has had manually added.
DESTINATION
Gateway
DESTINATION NETWORK OR DESTINATION HOST
Next hop IP address
Subnet Mask
Flag
Subnet Mask of Destination
U : route is up
I : reject route
G : use gateway
H : target is a host
R : reinstate route ford ynamic routing
D : dynamically installed by daemon or redirect
M : modified from routing daemon or redirect
Metric
The ‘distance’ to the target (usually counted in hops). It is not Used by
recent kernels, but may be needed by routing daemons.
Service
Shows the name for the WAN connection
Shows connection interfaces
Interface
8.6 ARP
Click ARP to display the ARP information.
FIELD
DESCRIPTION
IP address
Shows IP address of host pc
Complete
Flags
Incomplete
Permanent
Publish
HW Address
Device
Shows the MAC address of host pc
Shows the connection interface
YML-O-3G19W
3G WiFi Router User Guide
45
Download from Www.Somanuals.com. All Manuals Search And Download.
8.7 Dynamic Host Configuration Protocol (DHCP)
Click DHCP to display the DHCP information.
FIELD
DESCRIPTION
Hostname
MAC Address
IP address
Expires In
Shows the device/host/PC network name
Shows the Ethernet MAC address of the device/host/PC
Shows IP address of device/host/PC
Shows how much time is left for each DHCP Lease
8.8 PING
The PING menu provides feedback of connection test to an IP address or a host name.
3G WiFi Router User Guide
46
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendices
Legal & Regulatory Information
This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted under
the Copyright Act, no part may be reproduced, stored in a retrieval system or transmitted in any form, by any means, be it electronic,
mechanical, recording or otherwise, without the prior written permission of NetComm Limited. NetComm Limited accepts no liability or
responsibility, for consequences arising from the use of this product.
NetComm Limited reserves the right to change the specifications and operating details of this product without notice.
NetComm is a registered trademark of NetComm Limited.
All other trademarks are acknowledged the property of their respective owners.
Customer Information
ACA (Australian Communications Authority) requires you to be aware of the following information and warnings:
(1) This unit shall be connected to the Telecommunication Network through a line cord which meets the requirements of the ACA TSOO8
Standard.
(2) This equipment has been tested and found to comply with the Standards for C-Tick and or A-Tick as set by the ACA . These
standards are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio noise and, if not installed and used in accordance with the instructions detailed within this
manual, may cause interference to radio communications. However, there is no guarantee that interference will not occur with the
installation of this product in your home or office. If this equipment does cause some degree of interference to radio or television
reception, which can be determined by turning the equipment off and on, we encourage the user to try to correct the interference by one
or more of the following measures:
•
•
•
•
Change the direction or relocate the receiving antenna.
Increase the separation between this equipment and the receiver.
Connect the equipment to an alternate power outlet on a different power circuit from that to which the receiver/TV is connected.
Consult an experienced radio/TV technician for help.
(3) The power supply that is provided with this unit is only intended for use with this product. Do not use this power supply with any
other product or do not use any other power supply that is not approved for use with this product by NetComm. Failure to do so may
cause damage to this product, fire or result in personal injury.
Federal Communication Commission Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
3G WiFi Router User Guide
48
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of
exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during
normal operation.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
IC Important Note
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. The County
Code Selection feature is disabled for products marketed in the US/Canada.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (EIRP) is not more than that required for successful communication.
This device has been designed to operate with an antenna having a maximum gain of 4 dBi. Antenna having a higher gain is strictly
prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that permitted for successful communication.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
YML-O-3G19W
3G WiFi Router User Guide
49
Download from Www.Somanuals.com. All Manuals Search And Download.
This product includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please refer to the
GNU General Public License below to check the detailed terms of this license.
The following parts of this product are subject to the GNU GPL, and those software packages are copyright by their respective authors.
Linux-2.6.21 system kernel
busybox_1_00_rc2
bridge-utils 0.9.5
dhcpcd-1.3
ISC DHCP V2 P5
syslogd spread from busybox
wireless tools
ntpclient of NTP client implementation
GNU Wget
Availability of source code
Please visit our web site or contact us to obtain more information.
3G WiFi Router User Guide
50
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it
to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you
have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know
their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the
original, so that any problems introduced by others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program
will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent
must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the
Program” means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without
limitation in the term “modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running
the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this
License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for
a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part
thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive
YML-O-3G19W
3G WiFi Router User Guide
51
Download from Www.Somanuals.com. All Manuals Search And Download.
use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there
is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and
telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an
announcement, your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work
based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend
to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise
the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a
volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms
of Sections 1 and 2 above provided that you also do one of the following:
Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically
performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms
of Sections 1 and 2 above on a medium customarily used for software interchange; or,
Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only
for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with
Subsection
b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used
to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access
to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to
copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as
such parties remain in
full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further
restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they
do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under
this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a
patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through
you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such
claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by
3G WiFi Router User Guide
52
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
public license practices. Many people have made generous contributions to the wide range of software distributed through that system
in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software
through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original
copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those
countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the
limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and
“any later version”, you have the option of following the terms and conditions either of that version or of any later version published
by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the
author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
YML-O-3G19W
3G WiFi Router User Guide
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Warranty
The warranty is granted on the following conditions:
1. This warranty extends to the original purchaser (you) and is not transferable;
2. This warranty shall not apply to software programs, batteries, power supplies, cables or other accessories supplied in or with the product;
3. The customer complies with all of the terms of any relevant agreement with NetComm and any other reasonable requirements of NetComm including producing such
evidence of purchase as NetComm may require;
4. The cost of transporting product to and from NetComm’s nominated premises is your responsibility; and,
5. NetComm does not have any liability or responsibility under this warranty where any cost, loss, injury or damage of any kind, whether direct, indirect, consequential,
incidental or otherwise arises out of events beyond NetComm’s reasonable control. This includes but is not limited to: acts of God, war, riot, embargoes, acts of civil or
military authorities, fire, floods, electricity outages, lightning, power surges, or shortages of materials or labour.
6. The customer is responsible for the security of their computer and network at all times. Security features may be disabled within the factory default settings. NetComm
recommends that you enable these features to enhance your security.
The warranty is automatically voided if:
1. You, or someone else, use the product, or attempts to use it, other than as specified by NetComm;
2. The fault or defect in your product is the result of a voltage surge subjected to the product either by the way of power supply or communication line, whether caused by
thunderstorm activity or any other cause(s);
3. The fault is the result of accidental damage or damage in transit, including but not limited to liquid spillage;
4. Your product has been used for any purposes other than that for which it is sold, or in any way other than in strict accordance with the user manual supplied;
5. Your product has been repaired or modified or attempted to be repaired or modified, other than by a qualified person at a service centre authorised by NetComm; and,
6. The serial number has been defaced or altered in any way or if the serial number plate has been removed.
Limitations of Warranty
The Trade Practices Act 1974 and corresponding State and Territory Fair Trading Acts or legalisation of another Government (“the relevant acts”) in certain circumstances imply
mandatory conditions and warranties which cannot be excluded. This warranty is in addition to and not in replacement for such conditions and warranties.
To the extent permitted by the Relevant Acts, in relation to your product and any other materials provided with the product (“the Goods”) the liability of NetComm under the
Relevant Acts is limited at the option of NetComm to:
•
•
•
•
Replacement of the Goods; or
Repair of the Goods; or
Payment of the cost of replacing the Goods; or
Payment of the cost of having the Goods repaired.
All NetComm ACN 002 490 486 products have a standard 12 months warranty from date of purchase. However some products have an extended warranty option (refer to
packaging). To be eligible for the extended warranty you must supply the requested warranty information to NetComm within 30 days of the original purchase by registering
on-line via the NetComm web site at
3G WiFi Router User Guide
54
YML-O-3G19W
Download from Www.Somanuals.com. All Manuals Search And Download.
NETCOMM LIMITED Head Office
PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010
DYNALINK NZ 12c Tea Kea Place, Albany, Auckland,
New Zealand
P: 09 448 5548
F: 09 448 5549
Product Warranty
NetComm products have a standard 12 months warranty from date of purchase. However some products have an extended
Technical Support
If you have any technical difficulties with your product, please refer to the support section of our website.
Note:NetComm Technical Support for this product only covers the basic installation and features outlined in the Quick Start Guide. For further information regarding the advanced features of this product,
please refer to the configuring sections in the User Guide or contact a Network Specialist.
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown
may vary slightly from the actual product.
Download from Www.Somanuals.com. All Manuals Search And Download.
|