User’s manual
NAVIGON 33xx | 43xx max
English (United Kingdom)
January 2009
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Table of contents
Introduction.......................................................................................6
1.1 About this manual.....................................................................................6
1.1.2 Symbols.......................................................................................6
1.2 Legal notice..............................................................................................6
1.3 Questions about the product ....................................................................7
2.1 Scope of Delivery .....................................................................................7
2.3 Important safety information.....................................................................8
2.5 Navigating with GPS ..............................................................................13
3.2 Options...................................................................................................16
4.2 Changing a password.............................................................................17
4.4 Forgotten your password?......................................................................17
5.1 Information .............................................................................................17
5.2 Software keyboard .................................................................................20
5.3 Options...................................................................................................22
5.4 Menus.....................................................................................................22
User’s manual
Table of contents Š III
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Navigation .......................................................................................22
6.2 Specifying a destination .........................................................................24
6.2.6 Favourites..................................................................................32
6.3 Managing destinations ...........................................................................37
6.4 Multi-leg routes.......................................................................................39
6.5 Options...................................................................................................43
6.6 Working with the map.............................................................................46
6.7 Useful functions......................................................................................54
6.7.1 Nearby.......................................................................................54
6.7.2 Direct Help.................................................................................54
6.7.4 Block..........................................................................................55
6.7.7 Logbook.....................................................................................61
IV Š Table of contents
User’s manual
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
7.2 Taking a call ...........................................................................................68
7.3 Making a call ..........................................................................................68
7.4 During a call ...........................................................................................70
7.5 Useful functions......................................................................................71
7.6.1 Preset ........................................................................................71
7.6.2 Settings......................................................................................72
Appendix .........................................................................................75
9.1 Technical data........................................................................................75
9.2 Identification and serial number .............................................................76
9.3 Declaration of conformity........................................................................76
10 Troubleshooting..............................................................................76
11 Index ................................................................................................78
User’s manual
Table of contents Š V
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
1
Introduction
1.1
About this manual
1.1.1
Conventions
For better legibility and clarification, the following styles are used in this
manual:
Bold and italics:
Product names
SMALL CAPITALS:
Window and dialogue box titles
Highlighting of important parts in the text
Bold:
Underlined:
Names of buttons, input boxes and other elements
on the user interface
Underlined and italics:
Names of control elements on the navigation device
1.1.2
Symbols
The following symbols refer to specific passages of text:
Instructions and tips for operating the software
More detailed information and explanations
Warnings
1.2
Legal notice
Liability
1.2.1
The software and manual are subject to change without notice.
NAVIGON AG is not liable for the accuracy of the information contained
in this manual or for damages resulting from the use of this manual.
Suggestions for improvements and information regarding errors are
always welcome so that we can supply you with even better products in
the future.
1.2.2
Trade marks
All brand and trade marks mentioned in this document and registered
by third parties are subject without reservation to copyright law and the
proprietary rights of their respective owners. All trade marks, trade
- 6 -
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
names and company names used in this document are or may be trade
marks or registered trademarks of their respective owners. All rights
reserved except those explicitly granted.
If the registered trade marks used in this manual are not explicitly
identified as such, this does not imply that the name is not subject to the
rights of a third party.
Microsoft, Outlook, Excel and Windows are registered trade marks of
the Microsoft Corporation.
NAVIGON is a registered trade mark of NAVIGON AG.
1.3
Questions about the product
You have a question concerning your product? Then visit our webseite
www.navigon.com and click on "Support". There you will find an area
with frequently asked questions (FAQ Center) along with details of how
to contact us by phone or e-mail.
2
Before you begin
2.1
Scope of Delivery
Please check that the contents are complete. If anything is missing, get
in touch immediately with the dealer who sold you the product.
The purchased product includes the following:
►
►
►
NAVIGON 33xx | 43xx max navigation device
Car cradle (in parts, refer to "Assembling the cradle" on page 11)
Car charger cable (10-24V adapter for the vehicle's cigarette lighter)
with integrated TMC antenna
►
►
►
USB cable
Leaflet with illustrated installation instructions
Only NAVIGON 4350 max: 1 GB microSD card with navigation
maps
Before you begin
Download from Www.Somanuals.com. All Manuals Search And Download.
- 7 -
User’s manual NAVIGON 33xx | 43xx max
2.2
Description of the NAVIGON 33xx | 43xx max
1
2
3
4
5
6
7
Touch-screen
Microphone
LED
Reset
Mini USB socket for USB cable / car charger cable
Slot for microSD memory card
On/Off
2.3
Important safety information
In your own interest, please read the following safety information and
warnings carefully before starting up your navigation system.
2.3.1
Navigation safety information
Use the navigation system at your own risk.
Caution! To prevent accidents, do not operate the navigation system
while driving.
Caution! Do not look at the display unless it is absolutely safe to do so!
- 8 -
Before you begin
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Caution! Traffic regulations have priority over any instructions from the
navigation system.
Caution! Follow the instructions of the navigation system only when the
circumstances and the road traffic regulations allow you to do so! The
navigation system will still guide you to your destination even if you
deviate from the calculated route.
Caution! Check that the cradle is secured and adjusted properly before
each journey.
Note: If you have not understood the spoken instructions or are unsure
about what to do next, you can refer briefly to the map or schematic
view of your navigation system.
2.3.2
Safety information for the navigation device
Caution! Protect the device from moisture. The device is neither
waterproof nor protected against splash water.
Caution! Do not open the case of the navigation device under any
circumstances.
Caution! Do not expose the navigation device to extreme heat or cold.
This may damage the device or impair its function. (Refer to "Technical
Caution! Never unplug by pulling the cable. Doing so could severely
damage or destroy the device.
Note: Do not kink the cable. Make sure that the cable cannot be
damaged by sharp-edged objects.
Note: Clean the navigation device only with a damp cloth.
Note: Create a backup of the data in the internal memory of your
navigation device.
This is very easy to do with the NAVIGON Fresh software which can be
downloaded free of charge from the website
Before you begin
Download from Www.Somanuals.com. All Manuals Search And Download.
- 9 -
User’s manual NAVIGON 33xx | 43xx max
2.3.3
Safety guidelines when installing the device in your car
Caution! Fasten the cradle so that the navigation device is easy to see
and operate by the driver. Make sure that the driver's view of the traffic
is not impeded.
Caution! Do not attach the cradle within the working zone of any
airbags.
Caution! Do not fasten the cradle too close to the steering wheel or
other controls. The driver must not be obstructed in operating any car
functions.
Caution! When installing the cradle, make sure that it will not pose a
risk in the event of an accident.
Caution! Do not run cables directly next to safety-relevant devices and
power supplies.
Caution! Check that the cradle is secured and adjusted properly before
each journey. The suction cup may become loose after a while.
Caution! After installation, check all safety-relevant equipment in the
car.
Caution! Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
Caution! Disconnect the car charger cable from the cigarette lighter
whenever you park the car. The integrated mains adapter always
consumes a small amount of energy and could drain the car battery.
2.4
Preparing the NAVIGON 33xx | 43xx max for use
2.4.1
Installing the navigation system in the vehicle
Caution! Be sure to refer to all the safety information in chapter
- 10 -
Before you begin
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Assembling the cradle
(illustration similar)
►
Assemble the cradle as shown in the illustration. No tools are
needed for this.
Securing the cradle
(illustration similar)
1. Clean the suction cup and that part of the windscreen to which you
want to secure the cradle. Both must be dry and free of dirt and
grease.
2. Open the lever on the suction cup as far as possible.
3. Place the cradle suction cup against the windscreen.
4. Press the lever towards the windscreen.
Before you begin
Download from Www.Somanuals.com. All Manuals Search And Download.
- 11 -
User’s manual NAVIGON 33xx | 43xx max
Inserting the navigation device into the cradle
(illustration similar)
On the back of the NAVIGON 33xx | 43xx max you will see a circle
with two recesses.
1. Hang the navigation device by the upper recess on the upper lug of
the cradle. (See illustration)
2. Then press it towards the cradle so that it latches in place.
Supplying power to the navigation device
Included in delivery of the NAVIGON 33xx | 43xx max is a car charger
cable with which power can be supplied to the navigation device via the
vehicle's cigarette lighter.
►
Connect the car charger cable to the vehicle's cigarette lighter and
to the mini USB socket of the navigation device.
Note: Plug the USB connector into the navigation device as far it will
Caution! Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
The LED on the bottom of the navigation device lights up orange during
charging.
As soon as the battery is fully charged, the LED lights up green.
Note: It takes approx. 3-4 hours to charge the device when the battery
is flat.
A fully charged battery enables up to 2 hours of use depending on the
device configuration.
Removing the navigation device from the cradle
On the bottom of the plate in which you hung the navigation device is a
clip.
- 12 -
Before you begin
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
1. Pull the clip towards yourself so that the device is released from the
clip.
2. Lift the device up and out of the cradle.
2.4.2
2.4.3
TMC antenna
The NAVIGON 33xx | 43xx max has an integrated TMC receiver. The
TMC antenna is integrated in the car charger cable. Once the car
charger cable is connected, the device can receive current traffic
messages. If required, it can change your route dynamically, e.g. in
order to avoid a traffic jam.
Memory card
NAVIGON 33xx max, NAVIGON 4310 max:
A memory card is not required to operate the navigation system
because all the data are stored in the internal memory of the device. If
you purchase additional navigation maps but no longer have enough
space for them in the internal memory of your navigation device, it is
also possible for you to save these maps on a memory card (microSD
card). The navigation device can use navigation maps from both
memories.
NAVIGON 4350 max:
The scope of delivery includes a 2 GB microSD card containing the
navigation maps.
The memory card must be inserted in order to be able to use the
navigation application:
1. Insert the memory card into the device.
2. Press the card into the device until it locks into place.
Note: When you connect the NAVIGON 33xx | 43xx max to your
computer using a USB cable, the internal memory is detected as the
'NAVIGON' drive. The slot for the memory card is detected as a
removable disc.
Note: Data backups, software updates and navigation map updates can
be carried out quickly and conveniently with the NAVIGON Fresh
software, which you can download free of charge from the website
2.5
Navigating with GPS
GPS is based on a total of at least 24 satellites orbiting the Earth and
continuously transmitting signals of their position and time. The GPS
receiver receives this data and calculates its own geographical position
on the basis of the information transmitted by the various satellites.
Before you begin
Download from Www.Somanuals.com. All Manuals Search And Download.
- 13 -
User’s manual NAVIGON 33xx | 43xx max
Data from at least three satellites is required for positioning with an
acceptable degree of accuracy. With data from four or more satellites it
is possible in addition to determine the position's altitude above sea
level. Positioning is accurate to within three metres.
Once the navigation device has determined your position, this position
can be used as a starting point for calculating a route.
The map data on your navigation device includes the geographical
coordinates of all digitally recorded points of interest, streets and
places. This enables the device to calculate a route between a starting
point and a destination.
Calculation of the current position and its representation on the map
take place approximately once every second. In other words, your
current position is always shown on the map.
3
Switching on the
NAVIGON 33xx | 43xx max
1. Press the
(On/Off) key and keep it pressed until the device
switches on. (Approx. 1.5 seconds)
If password protection has been activated, the ENTER PASSWORD
window opens.
2. Enter the password.
3. Tap on OK.
The NAVIGATION window opens.
Note: When you switch on the NAVIGON 33xx | 43xx max for the first
time, you will be asked to make the following settings:
►
►
►
your preferred language for using for the software
the unit of length for distances
the time format
Note: If you have not used the NAVIGON 33xx | 43xx max for a long
time, the battery may be flat.
In this case the device must first be connected to the car charger cable
or to a suitable charger before it can be switched on. Chargers and
other accessories are available in the NAVIGON shop at
www.navigon.com or in specialist stores.
Forgotten your password?
If you forget your password, follow the procedure described in
- 14 -
Switching on the NAVIGON 33xx | 43xx max
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Switching the navigation device to standby mode
►
Press briefly (max. 1.5 seconds) on the
(On/Off) key.
- or -
1. Tap in the NAVIGATION window of the navigation software on the
button.
2. Tap on Standby.
Automatic Standby
You can configure the NAVIGON 33xx | 43xx max so that the
navigation device is automatically switched to standby mode.
►
In the NAVIGATION window tap on Options > Settings > General >
Automatic Standby.
►
Select after how much time you want the navigation device to be
switched to standby mode (Never, After 10 mins, After 20 mins,
After 30 mins).
►
Select Power Loss in order to switch the device to standby mode
when the external power supply is interrupted. As soon as the
device is connected again to the external power supply it will switch
on again automatically.
Switching off the navigation device
►
Press the
(On/Off) key and keep it pressed until the device
switches off. (Approx. 4 seconds.)
- or -
1. Tap in the NAVIGATION window of the navigation software on the
button.
2. Tap on Off.
Note: When you switch the navigation device to standby mode, the next
time it is switched on it will start very quickly with the window which was
active when switched off. In standby mode the device still consumes a
small amount of energy however. The battery may be flat after a few
days.
When you switch off the device, it consumes no energy. It can then take
several months for the battery to become flat. Switching the device on
again triggers a restart which can take some time (approx. 30 seconds).
Your settings and your saved destinations and routes will be retained.
Switching on the NAVIGON 33xx | 43xx max
Download from Www.Somanuals.com. All Manuals Search And Download.
- 15 -
User’s manual NAVIGON 33xx | 43xx max
3.1
Manual
An excerpt of this manual describing the most important functions of the
navigation software is saved on the navigation device.
To open the manual:
1. Tap in the NAVIGATION window on Options > Manual.
The TABLE OF CONTENTS window opens.
2. Tap on the name of the chapter you want to read.
The content of the chapter is shown.
With the
(Up) and
(Down) buttons you can scroll up one page
and down one page respectively.
With the
(To the Left) and
(To the Right) buttons you can
open the previous or the next chapter respectively.
►
►
Tap on the Table of Contents button in order to open the TABLE OF
CONTENTS window.
Tap on the
(Close) button in order to close the manual.
The NAVIGATION window is opened.
3.2
Options
Some windows offer options that lead to more functions.
A description of all available options can be found in the chapter
4
Password Lock
You can protect your navigation system from unauthoriised use by
creating a password.
4.1
Activating password protection
1. In the NAVIGATION window tap on Options > Settings > Options >
Password Lock.
The NEW PASSWORD window opens.
2. Enter a password in the New password box and tap on Next.
3. Enter this password again in the Confirm new password box.
4. Tap on Activate.
- 16 -
Password Lock
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Note: The password must have exactly 4 digits.
4.2
Changing a password
1. In the NAVIGATION window tap on Options > Settings > Options >
Password Lock.
The ENTER PASSWORD window opens.
2. Enter the currently valid password in the Enter password box.
3. Tap on Change password.
The NEW PASSWORD window opens.
4. Enter a password in the New password box and tap on Next.
5. Enter this password again in the Confirm new password box.
6. Tap on Activate.
Note: The new password must have exactly 4 digits.
4.3
4.4
Cancelling password protection
1. In the NAVIGATION window tap on Options > Settings > Options >
Password Lock.
The ENTER PASSWORD window opens.
2. Enter the currently valid password in the Enter password box.
3. Tap on Deactivate.
Forgotten your password?
If you enter the password wrongly three times, a window will open with
instructions telling you what to do now.
►
Follow the instructions on the screen.
5
Operating the NAVIGON 33xx | 43xx max
5.1
Information
Various information symbols are located at the top of many windows.
Operating the NAVIGON 33xx | 43xx max
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
GPS
The GPS symbol can indicate the following GPS reception states:
No GPS (No symbol): The built-in GPS receiver is not operational.
Contact customer service if the problem persists.
No Signal: Data is being received from less than three satellites.
Position cannot be calculated.
GPS Ready: Data is being received from at least three satellites.
Position can be calculated.
For details of the GPS status refer to chapter "GPS Status, saving the
Compass
The Compass symbol indicates in which direction you are currently
heading. It can indicate the following points of the compass: N, NE, E,
SE, S, SW, W, NW.
TMC (Traffic Information)
The NAVIGON 33xx | 43xx max has an integrated TMC receiver which
provides the navigation system with traffic information updates. If
necessary it can change your route dynamically, for example in order to
avoid a traffic jam.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC symbol can display the following TMC reception status:
Tuning (in red): The TMC receiver is operational but cannot find a
transmitter that is sending TCM signals. There are no active traffic
messages.
Tuning: The TMC receiver is operational but cannot find a station that
is transmitting TMC signals. Traffic messages are active however. This
can be the case, for example, when travelling through a tunnel.
TMC on Standby (in grey): Traffic messages can be receiverd.
Note: The TMC antenna is integrated in the car charger cable. The
Tuning symbol may still appear therefore when the car charger cable is
not connected to the NAVIGON 33xx | 43xx max.
- 18 -
Operating the NAVIGON 33xx | 43xx max
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
For details of the TMC function refer to chapter "TMC (Traffic
Energy
The Energy symbol can indicate the following states of the integrated
battery:
The device is being supplied by an external power source. The battery
is fully charged.
- or -
The battery cannot be charged because its temperature is too high or
too low.
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
Note: Lithium-ion batteries are allowed to be charged only in a
temperature range between 0°C and 45°C (32°F und 113°F). This
temperature range may be exceeded behind the windscreen in direct
sunshine. The device will interrupt the charging automatically as soon
as the temperature of the battery lies outside the given range. Such
interruptions are not indicated in the display. The device will be supplied
again by the external power source for the duration of the interruption.
Bluetooth / Phone (only NAVIGON 4350 max)
The NAVIGON 4350 max has an integrated Bluetooth hands-free
module. This enables you to use the device as a hands-free kit for a
mobile phone with Bluetooth capability.
The Phone symbol can display the following states of the hands-free
module:
No Bluetooth (No symbol): The Bluetooth function is deactivated.
Not connected (red mobile phone): The NAVIGON 4350 max has no
Bluetooth connection to another device.
Connected (white mobile phone): The NAVIGON 4350 max is
connected to a headset or a mobile phone.
Operating the NAVIGON 33xx | 43xx max
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Call in Progress (green mobile phone): The hands-free module of the
NAVIGON 4350 max is being used for a phone call.
Muting
The Muting symbol can indicate the following states:
No symbol: The navigation application is not muted.
Muting: The navigation application is muted. If the device is navigating
at the moment, you will not hear any driving instructions.
Note: This symbol indicates only the muted state of the navigation
instructions. It says nothing about the volume of the hands-free module.
5.2
Software keyboard
A software keyboard appears on the screen when text entries are
necessary.
All entries can be made on the software keyboard using your fingertips.
Only capital letters can be entered.
When entering town or street names you need not enter any special
characters or umlauts. The navigation system fills in these characters
for you automatically. For example, if you are looking for the town of
"Bärnau", then simply type in the word "BARNAU". Special characters
may be helpful however when naming saved destinations and routes.
5.2.1
Special keys
inserts a space.
deletes the character in front of the cursor.
opens the keyboard with numerals.
Latin, Cyrillic and Greek alphabet
opens the keyboard with the Latin alphabet.
opens the keyboard with the Cyrillic alphabet.
opens the keyboard with the Greek alphabet.
When you want to enter addresses, names or POIs, the keyboard with
the alphabet for the country in question will open automatically.
- 20 -
Operating the NAVIGON 33xx | 43xx max
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
When you want to save a destination to Favourites or when you enter a
POI category or a country, the keyboard with the alphabet of the user
interface will open automatically.
You can also switch from the Cyrillic or Greek keyboard to the Latin
keyboard. Many addresses can then also be entered as transliterations
or in the language of the user interface.
Example: The language of the user interface is English. You want to
navigate to Moscow. You have the following options:
►
►
►
"Москва" (Cyrillic)
"Moskva" (transliterated)
"Moscow" (English)
Note: Street names and place names can be entered only in the
language of the user interface if that is how they exist in the map's
database.
Note: The maximum number of keyboards is always 2.
Umlauts, accents and other letters
Another keyboard with special characters is available for each alphabet.
opens the keyboard with Latin special characters.
opens the keyboard with Cyrillic special characters.
opens the keyboard with Greek special characters.
As soon as you have entered a special character the letter keyboard
reappears.
5.2.2
Entering data
Often you can select an entry from a list. This is the case, for example,
when you enter a location.
As soon as you enter the first letter, the largest city in the given country
that begins with this letter appears.
Enter more letters and after each entry the first city which begins with
these letters will appear.
►
When the correct location appears, tap on
complete the entry.
(OK) in order to
You can open at any time a list containing all the locations which begin
with the letters or include the text already entered. The more letters you
enter, the shorter the list becomes.
Operating the NAVIGON 33xx | 43xx max
Download from Www.Somanuals.com. All Manuals Search And Download.
- 21 -
User’s manual NAVIGON 33xx | 43xx max
►
Tap on
(Open List) to call up this list.
(Up) button and the
You can use the
through the list.
(Down) button to move
►
Tap on an entry in the list to select it and transfer it to the input box.
The list closes once an entry has been selected. You are now finished
with entering the city.
►
Tap on
(Close List) in order to close the list without selecting
an entry.
Note: The list opens automatically as soon as it contains only 5 or less
entries.
5.3
5.4
Options
Some windows offer options that lead to more functions.
A description of all available options can be found in the chapter
Menus
Some buttons have menus which open when activated.
►
Tap on a menu point to execute its function.
If you would like to quit the options list without selecting a function, tap
on the button you used to open the menu.
6
Navigation
Use the navigation system at your own risk.
Caution! Be sure to refer to all the safety information in chapter
Impaired GPS reception
If GPS reception is impaired, navigation will be interrupted. As soon as
GPS reception is restored, the navigation system calculates any change
of position which has occurred in the meantime. You can then simply
continue navigating.
- 22 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Arriving at your destination
When you have reached your selected destination, a message to this
effect will be displayed.
Only your current position (orange arrow) will now be shown on the
map.
6.1
Starting the navigation application
You have switched on the navigation device and, if necessary, entered
the password.
The following message appears:
"The navigation software on this device is designed to provide route
suggestions and does not replace the need for driver attentiveness or
the requirement to adhere to road traffic regulations, good driving
practice and legally posted directions. For safety, posted road signs and
directions should always take precedence over the directions of this
unit. Do not operate this unit while driving."
►
After you have read and fully understood the message, tap on OK.
If you do not accept the content of the message, tap on Cancel in
order to switch the navigation device off again.
The NAVIGATION window is opened. From here you can access all the
functions of the navigation application.
Only NAVIGON 4350 max:
►
►
Tap on
into the foreground.
(Phone) in order to move the hands-free module
Tap on
(Navigation) in order to move the NAVIGATION
window back into the foreground.
For detailed information about the handsfree module refer to the
Initialising the GPS receiver
Note: Good reception of GPS data requires an unobstructed path from
the GPS receiver to the satellites. Tunnels, narrow thoroughfares
between buildings and reflecting house fronts can restrict GPS
reception greatly or make it impossible. If the GPS receiver or the
navigation device is inside a vehicle, a metallised windscreen or a
windscreen heater can be the cause of poor GPS reception.
As soon as the navigation device has been switched on, initialisation of
the GPS receiver will begin.
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
- 23 -
User’s manual NAVIGON 33xx | 43xx max
The integrated GPS receiver is not initialised for the first time until the
navigation application is started for the first time. It can take up to
20 minutes to initialise the GPS receiver for the first time.
Note: If the GPS symbol indicates GPS Ready after far less than
20 minutes, it is advisable to leave the navigation device switched on
for at least another 15 minutes in order to ensure reliable operation of
the receiver.
Each time you switch on the navigation device after this, GPS reception
will start within a short time.
If the navigation device has not been switched on for more than a week,
it can take up to 10 minutes to re-initialise the receiver.
In the top right hand corner of the display, you will see the GPS symbol.
As soon as data from at least three satellites is received, the icon will
change to
(GPS Ready).
Note: Initialisation takes the least time if you do not start driving until
the initialisation has finished.
page 18.
Returning to the Navigation window
The NAVIGATION window opens when the navigation application is
started.
If another window of the navigation application is open, tap on
(Back). This will return you to the window you came from.
►
Tap on
(Back) repeatedly until the NAVIGATION window is
opened.
6.2
Specifying a destination
Under New Destination you can enter destinations to which you have
not yet navigated or which you have not saved.
Here you can enter the destination's address or coordinates, select a
POI, or select a destination with the Direct Access function.
Note: The first time that you want to enter a new destination you will be
asked to select the country in which your destination is situated.
- 24 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Under My Destinations the NAVIGON 33xx | 43xx max provides the
following lists of destinations and addresses for you to select from:
►
►
►
FAVOURITES: All destinations that you have entered in the
NAVIGON 33xx | 43xx max and then saved.
LAST DESTINATIONS: Destinations to which you have navigated on a
previous occasion.
IMPORTED ADDRESSES: Here there may be 2 lists to choose from:
►
FROM OUTLOOK: All destinations which you have imported from
Microsoft Outlook.
►
FROM THE PHONE BOOK: Addresses from a mobile phone which
is connected via Bluetooth (only NAVIGON 4350 max)
6.2.1
Specifying the country in which the destination is situated
At top left in the ADDRESS, POI IN A CITY and POI NATIONWIDE windows
you will find the Country button. It bears the flag of the country in which
you can currently select destinations for the navigation application.
If your destination is in a different country, then proceed as follows:
1. Tap the Country button.
2. Enter the name of the country in which your destination is situated.
The button shows the flag of the destination country.
Note: The selection list contains only those countries whose maps are
available to the navigation device.
6.2.2
Entering a destination address
1. Tap in the NAVIGATION window on New Destination > Enter an
Address.
If you want to enter an address in a country in which normally the
street comes first (e.g. Sweden, Norway,…), then the INPUT MODE
FOR ADDRESS DATA menu will open.
1a Select whether you would like to enter the street first and then the
location (Street First), or first the location and then the street (City
First).
Note: The following description is based on City First as the order for
entering the address.
If you don't want to choose each time the order for entering the address
information, you can select a default setting under Options > Settings >
General > Input Mode for Address Data. Please note however that the
Street First order of entry is not possible for all countries. In this case
you must enter the location first.
Navigation
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
The ADDRESS window opens.
2. Enter the name or the postal code of the destination town.
3. Enter the name of the destination street.
4. Enter the house number. If you do not know the house number,
then leave this box empty.
If you don't know the house number but know the name of a nearby
side street, then tap on the Cross Street box and enter the name of
this street. The navigation system will calculate a route to the
intersection of the streets you have entered.
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.
Indicated on the Activate 'MyRoutes' button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Tap on Activate 'MyRoutes' in order to change the setting.
5. Tap on Start Navigation in order to navigate to the stipulated
address
- or -
Tap on Parking in order to search for a car park near your
destination.
Sometimes the destination cannot be found exactly because, for
example, the entered combination of place and street name exists
several times.
In this case a window will open with a list of all the addresses
matching your entry plus additional information.
►
Tap on the address to which you want to navigate.
If the entered house number is not included on the map, the window
will show an address with the house number closest to the one
entered.
The map opens in Preview mode. The destination is indicated on the
map.
For detailed information on how to start navigation, please refer to
Note: It is not necessary to enter all the address details. You can tap on
Start Navigation before you get that far.
If you specify the town only, the navigation system will calculate a route
to the town centre.
If you specify only the town and street without specifying a house
number or cross street, the navigation system will calculate the best
route to this street.
- 26 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
6.2.3
Enter Coordinates
You can also enter the geographic coordinates of your destination. The
coordinates can be entered as decimal degrees or in degrees, minutes
and seconds.
1. Tap in the NAVIGATION window on New Destination > Enter an
Address.
The ADDRESS window opens.
2. Tap in the ADDRESS window on Options > Enter Coordinates.
The ENTER COORDINATES window opens.
Entering as a decimal number
3. Enter the degree of latitude.
Begin the entry with a minus sign if you want to enter a southern
degree of latitude.
4. Enter the degree of longitude.
Begin the entry with a minus sign if you want to enter a western
degree of longitude.
Entering with minutes / seconds
3. Enter the degree of latitude.
Use the corresponding buttons shown on the keyboard in order to
enter the units:
(degrees),
(minutes),
(seconds).
The (N S) button alongside the entry box indicates whether it is a
northern or southern degree of latitude.
►
Tap on the button if you want to change the current setting.
4. Enter the degree of longitude.
Use the corresponding buttons shown on the keyboard in order to
enter the units:
(degrees),
(minutes),
(seconds).
The (E W) button alongside the entry bo x indicates whether it is an
eastern or western degree of longitude.
►
Tap on the button if you want to change the current setting.
6.2.4
Points of interest
Points of Interest, also called POI (Points Of Interest) for short, are
useful addresses that are catalogued according to particular criteria.
POIs include ports, airports, restaurants, hotels, petrol stations, public
buildings, doctor's surgeries, hospitals, shopping centres, etc.
Navigation
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Points of interest can be displayed on the map by means of a symbol.
In the NAVIGATION window tap on Options > Settings > Map Display >
Categories Shown in order to select the categories you want to appear
on the map.
POI nearby
POIs nearby are POIs located within a certain radius of your current
location. This means you can always find the nearest petrol station for
example, no matter where you are.
Note: GPS reception must be good enough for determining your
position. Check the
(GPS Ready) symbol to see whether GPS
reception is good enough.
page 23.
Note: The Direct Access section offers 3 categories of POI from the
current vicinity which can be searched for quickly and without additional
entry.
1. Tap in the NAVIGATION window on New Destination > Search for
POI > Nearby.
The POI NEARBY window opens.
2. Select a category from which you would like to find a POI.
Categories in which no destinations are available nearby cannot be
selected.
If sub-categories exist for the category you have selected, the Sub
Category list opens.
3. Select the sub-category from which you would like to select a POI.
The Destination list opens. It contains the nearest POI in the
specified category, sorted by distance.
4. If the list is very long:
►
Tap on
(Close List).
The keyboard appears.
►
►
Enter a number of letters from the destination.
Tap on
(Open List).
The list now contains only those destinations which begin with or
contain the letters entered.
5. Tap on the name of the destination.
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.
- 28 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Indicated on the Activate 'MyRoutes' button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Tap on Activate 'MyRoutes' in order to change the setting.
6. Tap on Start Navigation.
- or -
Tap on Parking in order to search for a car park near your
destination.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
POI of nationwide significance
POIs of nationwide significance are airports, sights, national
monuments, large ports etc. This way you can find well-known places of
interest even if you don't know the name of their location.
1. In the NAVIGATION window tap on New Destination > Search for
POI > Nationwide.
The POI NATIONWIDE window opens.
2. Select a category from which you would like to find a POI.
The Destination list opens. It contains the POI from the selected
category, sorted alphabetically.
3. If the list is very long:
►
Tap on
(Close List).
The keyboard appears.
►
►
Enter a number of letters from the destination.
Tap on
(Open List).
The list now contains only those destinations which begin with or
contain the letters entered.
4. Tap on the name of the destination.
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.
Indicated on the Activate 'MyRoutes' button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Tap on Activate 'MyRoutes' in order to change the setting.
5. Tap on Start Navigation.
- or -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
- 29 -
User’s manual NAVIGON 33xx | 43xx max
Tap on Parking in order to search for a car park near your
destination.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
POI in a particular location
POIs in a particular location can be useful when navigating in an
unfamiliar town.
1. In the NAVIGATION window tap on New Destination > Search for
POI > in a City.
The POI IN A CITY window opens.
2. Enter the name or the postal code of the destination town.
3. Select a category from which you would like to find a POI.
Categories in which no destinations are available in the selected
town cannot be entered.
If sub-categories exist for the category you have selected, the Sub
Category list opens.
4. Select the sub-category from which you would like to select a POI.
The Destination list opens. It contains POI from the specified
category, sorted alphabetically.
5. If the list is very long:
►
Tap on
The keyboard appears.
Enter a number of letters from the destination.
(Close List).
►
Tap on
(Open List).
The list now contains only those destinations which begin with or
contain the letters entered.
6. Tap on the name of the destination.
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.
Indicated on the Activate 'MyRoutes' button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Tap on Activate 'MyRoutes' in order to change the setting.
Sometimes the destination cannot be found exactly because, for
example, several restaurants with the same name exist in the town
in question.
- 30 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
In this case a window opens with all the destinations matching your
entry plus additional information.
►
Tap on the destination to which you want to navigate.
7. Tap on Start Navigation.
- or -
Tap on Parking in order to search for a car park near your
destination.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
Direct access to POI
The direct access area contains 3 categories of POI. Destinations in
your vicinity that correspond to one of these categories can be viewed
here quickly and without further entry.
►
In the NAVIGATION window tap on Options > Settings > General in
order to select which categories or sub-categories are to be
available for direct access.
Note: The categories for the Direct Access function are the same as
Note: GPS reception must be good enough for determining your
position. Check the
(GPS Ready) symbol to see whether GPS
reception is good enough.
page 23.
1. In the New Destination window tap on NAVIGATION.
The NEW DESTINATION menu opens.
In the Direct Access area you are shown the symbols of those POI
categories that are available by direct access.
2. Tap on the category from which you would like to select a POI.
A list opens. It contains the nearest POIs in the specified category,
sorted by distance.
3. Tap on the name of the destination in order to start navigation to it.
The map opens in Preview mode. The destination is indicated on
the map.
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
- 31 -
User’s manual NAVIGON 33xx | 43xx max
For detailed information on how to start navigation, please refer to
6.2.5
Information about the destination
For many destinations that you specify, there will be further information
available, stored in the navigation system's database.
There is, for example, a telephone number available for many
restaurants. You can then call the restaurant to reserve a table, for
example.
One of the destination entry windows described above is open.
►
Tap on Options > Info.
The DESTINATION INFO window opens. It contains all the information
about the specified destination that is stored in the navigation system's
database.
►
Tap on Cancel in order to close the DESTINATION INFO window
again.
►
Tap on
map.
(Show on Map) in order to see the destination on the
NAVIGON 4350 max: Tap on
(Call) in order to call the number
indicated.
Note: The Call function is only available when the NAVIGON 4350 max
is connected via Bluetooth to a mobile phone.
For details of how to connect to a mobile phone refer to chapter
6.2.6
Favourites
Destinations to which you want to travel often can be saved in the
FAVOURITES list.
In the FAVOURITES list you can save up to 500 destinations.
Information on how to save a destination can be found in chapter
1. Tap in the NAVIGATION window on My Destinations > Favourites.
2. Tap on the destination to which you want to navigate.
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.
Indicated on the Activate 'MyRoutes' button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Tap on Activate 'MyRoutes' in order to change the setting.
- 32 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
3. Tap on Start Navigation.
- or -
Tap on Parking in order to search for a car park near your
destination.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
Note: Favourites are indicated on the map by a small flag with their
name.
6.2.7
Last Destinations
NAVIGON 33xx | 43xx max saves the last 12 destinations to which you
have navigated in the LAST DESTINATIONS list.
1. Tap in the NAVIGATION window on My Destinations > Last
Destinations.
2. Tap on the destination to which you want to navigate.
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.
Indicated on the Activate 'MyRoutes' button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Tap on Activate 'MyRoutes' in order to change the setting.
3. Tap on Start Navigation.
- or -
Tap on Parking in order to search for a car park near your
destination.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
6.2.8
Imported Addresses from Outlook
You can use the NAVIGON Sync software to import into your
navigation system the contact addresses which you have saved in
Microsoft Outlook on your computer. Addresses from Outlook are then
found in the IMPORTED ADDRESSES FROM OUTLOOK list
Navigation
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Note: NAVIGON Sync can be downloaded free of charge from
Contacts which have been saved with several addresses will appear
once with each address in the IMPORTED ADDRESSES list.
1. Tap in the NAVIGATION window on My Destinations > Imported
Addresses.
NAVIGON 4350 max: In the NAVIGATION window tap on My
Destinations > Imported Addresses > From Outlook.
2. Tap on the address to which you want to navigate.
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.
Indicated on the Activate 'MyRoutes' button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Tap on Activate 'MyRoutes' in order to change the setting.
3. Tap on Start Navigation.
- or -
Tap on Parking in order to search for a car park near your
destination.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
6.2.9
Imported Addresses from the phone book (only
NAVIGON 4350 max)
The phone book of a mobile phone with which you are connected can
be imported into the NAVIGON 4350 max. Addresses from the phone
book are then found in the IMPORTED ADDRESSES FROM THE PHONE
BOOK list.
1. In the NAVIGATION window tap on My Destinations > Imported
Addresses > From the phone book.
2. Select the contact you want from the phone book.
3. Tap on the address to which you want to navigate.
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.
Indicated on the Activate 'MyRoutes' button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Tap on Activate 'MyRoutes' in order to change the setting.
4. Tap on Start Navigation.
- or -
- 34 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Tap on Parking in order to search for a car park near your
destination.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
6.2.10
Navigating home
In NAVIGON 33xx | 43xx max you can save an address as your home
address. You can navigate to your home address at any time by
pressing a single button.
More information about entering your home address can be found in the
►
In the Take Me Home window tap on NAVIGATION.
If you have not yet entered your home address, a dialog box will
notify you of this.
Navigation starts. The route profile used for the previous navigation
will be applied.
6.2.11
Selecting destinations on the map
You may select a destination directly on the map. This is a quick way to
select towns, streets and POI.
1. In the NAVIGATION window tap on Show Map.
2. Tap on
(Destination search)
The map opens in Destination search mode.
3. Tap on the point to which you want to navigate.
Note: For details of how to change the map view so that your destination
page 52.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
4. Tap on
(OK).
The DESTINATION ON MAP window opens. The detailed address data
of the selected destination is displayed in the upper left-hand
corner.
Navigation
- 35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
5. Tap on Take Me There.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
6.2.12
Route preview
The map is open in Preview mode.
The navigation destination is depicted by a small flag.
page 46.
Route Profile
The route is calculated on the basis of a route profile. The current
settings are indicated by symbols on the
(Route
Profile) button at the top right edge of the map.
►
If you now want to view or change the route profile, tap on Route
Profile.
Note: If you change the route profile, the changes will also apply to
future navigations.
Information about individual route profile settings can be obtained by
tapping on the related
(Help) button.
Turn-by-Turn List
►
If you want to see detailed directions for the route, tap on Options >
Turn-by-Turn List.
For details of the functions in the TURN-BY-TURN LIST window refer to
MyRoutes
When the MyRoutes function is activated, the navigation system
calculates up to three routes on the basis of the currently selected route
profile and shows them on the map in different colours (orange, green,
blue) and with a number. For each route there is a button with the same
number and a symbol in the same colour.
- 36 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
When calculating the time of arrival or the trip time, the navigation
system takes account of additional factors such as day of the week and
time of day.
The route which corresponds best to the selected route profile is
marked with "MyRoute".
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for a
particular route. No different route is then shown on the button in
question.
Start Navigation
►
Tap on the button of the route which you want to use for the
navigation.
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
►
►
Wait. As soon as GPS reception is good enough for determining
your position, the route will be recalculated and navigation will
begin.
Tap on Cancel. The window in which you entered your destination
will open again. Your destination is saved in the LAST DESTINATIONS
list.
Tap on Demo. The route will be calculated using the centre of the
destination location as starting point. Navigation will then be
simulated on this route.
Tap on
(Back) in order to terminate the demonstration.
Note: If you selected the destination on the map, then the Demo button
is not available.
6.3
Managing destinations
Every destination you enter and destinations from the LAST
DESTINATIONS and IMPORTED ADDRESSES lists can be saved in the
FAVOURITES list. This makes sense if you frequently navigate to a
particular destination.
Note: Favourites are indicated on the map by a small flag with their
name.
Navigation
- 37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
6.3.1
Saving destinations
Navigation button!
2. Tap on Options > Save Destination.
- or -
1. Select a destination from the LAST DESTINATIONS list or from the
the Start Navigation button!
2. Tap on Options > Save as Favourite.
3. Enter a name for the destination.
4. Tap on Save.
6.3.2
Defining the home address
You can always start navigation to your home address very quickly by
tapping in the NAVIGATION window on Take Me Home.
You can define exactly one destination as your home address. This
destination is saved in the FAVOURITES list.
Proceed as follows:
1. Tap in the NAVIGATION window on New Destination > Enter an
Address.
The ADDRESS window opens.
2. Enter your home address.
3. Tap on Options > Save Destination.
4. Enter a name for the address. (For example "Home Address".)
Your home address is now saved in the FAVOURITES list.
5. Tap on
(Back).
The NAVIGATION window opens.
6. Tap on My Destinations > Favourites.
7. Select from the FAVOURITES list the destination which you want to
define as your new home address. (Refer also to Favourites on
page 32)
8. Tap on Options > Home Address.
The selected destination has now been saved as your home address.
Your home address now appears in the FAVOURITES list marked by a
house symbol.
- 38 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Note: The home address is also indicated on the map by a house
symbol.
Changing the home address
You can define a different address as the home address at any time.
Proceed as described above.
6.4
Multi-leg routes
It is possible to plan routes without GPS reception, for example in the
comfort of your home. Planned routes can be saved for later use. This
allows you to plan as many routes as you like, for example for your
holidays.
1. In the NAVIGATION window tap on Options.
The options list opens.
2. Tap on the Route Planning option.
The ROUTE PLANNING window opens.
6.4.1
Entering the starting point
The starting point of a route is the point at which you want to begin your
trip. This is not necessarily the current location. If you are planning a
route for your holidays at home, you could, for example, enter your
hotel as the starting point.
The starting point is only important if you want to see a planned route
on the map but currently have no GPS reception, or if you are not
currently at the planned starting point. This is why your selected starting
point has the flow number "0".
As soon as you start navigation, your current location will be used as
the starting point for the route calculation.
The first leg of the route is therefore the journey to the route point with
flow number "1".
1. Tap on the Specify Starting Point box.
The STARTING POINT menu opens.
If you want to enter your current location as the starting point:
2. Tap on the Current Position menu item.
If you want to enter a different starting point:
2. Tap on the corresponding button.
3. Enter the starting point. (Refer to the corresponding section of
4. Tap on Set Starting Point.
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
- 39 -
User’s manual NAVIGON 33xx | 43xx max
The selected starting point will now be displayed next to the 0
button (Starting Point).
Changing the starting point
►
Tap on the starting point (button 0).
The STARTING POINT menu opens. You can now enter a different
starting point. Proceed as described above.
6.4.2
Entering route points
The route points of a route are the destinations that you want to
navigate to.
The flow number for each route point is indicated on a button in front of
it.
1. Tap on the Add Route Point box.
The ROUTE POINT menu opens.
2. Tap on the button for how you want to enter the destination.
3. Enter the route point. (Refer to the corresponding section of chapter
4. Tap on Add.
The selected route point is now shown next to its flow number.
Repeat these steps for each destination that you want to add to your
route.
6.4.3
Editing route points
Route points can be deleted from a route. The order of the route points
can be changed as you wish.
Note: The starting point (flow number "0") can be neither moved nor
deleted. However you can make another route point into the starting
point.
►
Tap on the route point that you want to edit.
The context menu contains the following buttons:
Route Point Up: Moves the selected route point further to the front.
(Example: route point 2 becomes route point 1).
Route Point Down: Moves the selected route point further to the
back. (Example: route point 2 becomes route point 3).
- 40 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Delete: Deletes the selected route point. A dialog window prompts
you to confirm deletion.
6.4.4
Managing routes
You can save each planned route under a particular name.
Note: Only the start point and route points will be saved, not the
calculated route. When you load a saved route, it must be recalculated
before navigation can start.
You can load, rename or delete stored routes.
Saving routes
The ROUTE PLANNING window is open. You have entered the starting
point and at least one route point.
1. Tap on Options > Save Route.
2. Enter a name for the route.
3. Tap on Save.
The destination is now saved to the SAVED ROUTES list. The dialog
window closes.
Loading routes
1. Tap on Options > Saved Routes.
2. Tap on the route that you want to load.
3. Tap on Load Route.
The ROUTE PLANNING window opens. The starting point and the
route points of the loaded route have been entered.
6.4.5
Calculating and displaying routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The ROUTE PLANNING window is open. The starting point and at least
one route point have been entered.
►
Tap on Show Route.
The map opens in Preview mode.
The starting point and the route points are marked by flags. The
distance and the estimated trip time is given for each leg of the
route.
6.4.6
Simulating routes
It is also possible simply to simulate navigation on a planned route.
Navigation
- 41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Note: GPS reception is not necessary for simulation.
If you have planned a multi-leg route, only the first leg will be simulated.
You have calculated and displayed a route.
►
Tap on Options > Simulation.
The route will be recalculated for simulation purposes. Simulation
starts when calculation has finished.
Stopping simulation
You can stop simulation at any time.
►
Tap on
(Back).
The ROUTE PLANNING window opens.
6.4.7
Route preview
You have calculated and displayed a route. The map is open in
Preview mode.
Route Profile
The route is calculated on the basis of a route profile. The current
settings are indicated by symbols on the
(Route
Profile) button at the top right edge of the map.
If you now want to view or change the route profile, tap on Route
Profile.
Note: If you change the route profile, the changes will also apply to
future navigations.
Information about individual route profile settings can be obtained by
tapping on the related
(Help) button.
Note: When you load routes which originate from a different provider
than NAVIGON, the Route Profile button may be inactive. You cannot
change the route profile of this route.
Turn-by-Turn List
If you want to see detailed directions for the route, tap on Options >
Turn-by-Turn List.
For details of the functions in the TURN-BY-TURN LIST window refer to
- 42 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
MyRoutes
When the MyRoutes function is activated, the navigation system
calculates up to three routes on the basis of the currently selected route
profile and shows them on the map in different colours (orange, green,
blue) and with a number. For each route there is a button with the same
number and a symbol in the same colour.
When calculating the time of arrival or the trip time, the navigation
system takes account of additional factors such as day of the week and
time of day.
The route which corresponds best to the selected route profile is
marked with "MyRoute".
Note: The MyRoutes function can be used only for routes with only one
route point. For routes with two or more route points only one route is
calculated and displayed, regardless of whether you have activated the
function or not.
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for a
particular route. No different route is then shown on the button in
question.
Start Navigation
►
Tap on the button of the route which you want to use for the
navigation.
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
Wait. As soon as GPS reception is good enough for determining
your position, the route will be recalculated and navigation will
begin.
►
Tap on Cancel. The map opens in Preview mode.
6.5
Options
Some windows offer options that lead to more functions.
►
►
►
Tap on Options to open the options list.
Tap on the option you would like to use.
If you would like to quit the options list without selecting an option,
tap on the Options button again.
Navigation
- 43 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
2D/3D: Changes between 2D and 3D mode. The symbol indicates the current
mode.
Add to Route: Opens the route planning. The address specified will be added as
Block: Opens a window in which you can block a section of the route lying
ahead in order to calculate a route which avoids this section, e.g. if you
have heard on the radio of a traffic jam relating to this section. (Refer to
Day/Night: Changes between "Day" and "Night" display modes. The symbol
indicates the current mode.
Delete All: Deletes all destinations in the list (LAST DESTINATIONS list or
FAVOURITES list, depending on where you opened the options). The list
is then empty. A dialog window prompts you to confirm deletion.
Delete: Deletes the selected destination from the LAST DESTINATIONS or
FAVOURITES list or the selected route from the SAVED ROUTES list. A
dialog window prompts you to confirm deletion.
Direct Help: Opens a window in which you can find in quick and uncomplicated
manner the addresses and phone numbers of offices in your direct
vicinity that can be useful in emergencies. (Refer to "Direct Help" on
can initiate a call directly from here. (Only NAVIGON 4350 max.)
Enter Coordinates: Opens the ENTER COORDINATES window. Here you can enter
the geographic coordinates of your destination. (Refer to "Enter
Factory Settings: Resets all settings to the as-delivered state. Routes and
saved destinations are deleted. The software is re-started and behaves
as if started for the first time after being purchased. (Refer to "Switching
NAVIGON 4350 max: Deletes in addition all the connection data of
already paired devices.
GPS Status: Opens the GPS STATUS window. Here you can see details
regarding GPS reception. You can also save the data of your current
location. (Refer to "GPS Status, saving the current location" on
page 55)
Home Address: Saves the selected destination as your home address. You can
then always start navigation to this destination very quickly by tapping in
the NAVIGATION window on Take Me Home.
- 44 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Interim Destination: Sets the selected point as interim destination. The
navigation system will first guide you to this interim destination.
Afterwards you can continue your original navigation.
Manual: Opens the manual on the navigation device. Refer to "Manual" on
page 16.)
MyReport: Opens the MYREPORT window. Here you can notify NAVIGON about
any changes to traffic monitoring systems and routing.
MyRoutes: Opens the map in Preview mode. You are provided with up to three
different suggestions as to how you can continue your journey. Select
one of the routes offered.
New Route: Deletes the starting point and all route points from the ROUTE
PLANNING window so that you can plan a new route.
If necessary, save the previously planned route!
Parking: Starts navigation to a car park near the destination.
Password Lock: Opens a window in which the password can be configured.
POI on Your Route: Opens a list with POIs lying on your route. A destination
shown here can be selected as an interim destination and can be
navigated to.
Product Information: Here you are shown the version numbers and copyright
details of the hardware and software.
Rename: Opens a window in which you can change the name for the selected
destination or route.
Route Planning: Opens the ROUTE PLANNING window. Here you can plan
routes, manage planned routes and start navigation on a planned route.
Route Profile: Opens the ROUTE PROFILE window. Here you can view the
options for route planning and, if necessary, change them.
Save as Favourite: Saves the selected destination to the FAVOURITES list. (Refer
Save Destination: Saves the selected address in the FAVOURITES list. (Refer to
Save Position: Opens the SAVE DESTINATION AS... window. Here you can save
your current position under a certain name in the FAVOURITES list.
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
- 45 -
User’s manual NAVIGON 33xx | 43xx max
Save Route: Opens a window in which you can save the planned route under a
Saved Routes: Opens a dialog window into which you can load a saved route.
Settings: Opens the SETTINGS window. Here you can configure the navigation
system. (Refer to "Configuring the NAVIGON 33xx | 43xx max" on
page 61)
Show on Map: Shows the selected address on the map.
Simulation: Simulates a navigation on the route indicated. This simulation can
be performed without GPS reception. On multi-leg routes, only the first
leg is simulated.
Skip Route Point: Tap this button to omit the next route point. This button is
active only when at least 2 route points still lie ahead of you. (Refer to
Touchscreen Calibration: The touchscreen can be re-calibrated if it responds
poorly to touch. Follow the instructions on the screen.
Traffic: Opens the TRAFFIC INFORMATION window in which pending reports are
Turn-by-Turn List: Shows detailed directions for the route, including all points at
6.6
Working with the map
6.6.1
Selecting the navigation map
Each country has its own navigation map. Seamless navigation over
several maps on one continent is possible however if a continuous
route can be calculated with the maps saved on the device.
Even if maps of countries in other continents are available on the
navigation device, the NAVIGON 33xx | 43xx max can only ever work
with the maps of a single continent.
Tap in the NAVIGATION window on Options > Settings > Map Display in
order to see which maps are currently in use. Here you can also select
a different continent if the navigation device contains any maps of
countries on other continents.
6.6.2
Map in Preview mode
You have entered a destination and tapped on Start Navigation.
- or -
You have planned or loaded a route and tapped on Show Route.
- 46 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
The map opens in Preview mode.
1
2
When the MyRoutes function is activated, up to three numbered routes
are indicated on the map in different colours (orange, green, blue).
When the MyRoutes function is deactivated or if you have planned a
route with more than one route point, only one route is displayed.
The current position is indicated (orange arrow).
If you display a planned or loaded route and the specified starting point
is not your current location, then it is possible that your current position
will not be shown on the preview.
3
4
Symbols on the
(Route Profile) button indicate the
current settings in the route profile. If you tap on this button, the ROUTE
PROFILE settings window will open.
►
The left symbol indicates which speed profile is set (in this example:
car).
►
The three symbols on the right indicate whether Motorways, Toll
Roads and Ferries are permitted for calculating the route.
For each route (orange, green, blue) there is a button with the same
number and a symbol in the same colour. Indicated on each button are
the estimated time of arrival, the total distance and the estimated
duration of the particular route.
If the MyRoutes function is activated, the route corresponding best to
the selected route profile will be marked with "MyRoute".
As soon as you tap on a button, navigation along the route in question
will start.
5
The destination is marked with a little flag.
If you display a planned or loaded route, the starting point and each
route point will be marked with a little flag.
Navigation
- 47 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
In the case of a multi-leg route, the distance and the estimated driving
time for each leg are displayed.
►
Tap on the
(Route Profile) button (see Figure, point
3) in order to view and if necessary change the profile on which the
route calculation is based.
►
To start the navigation, tap on the button for the route (see Figure,
point 4) you want to use for the navigation.
If you display a planned or loaded route, the route may be
recalculated. The starting point for the calculation will now be your
current location. You will first be guided to the first route point
entered.
►
►
Tap on Options > Turn-by-Turn List to view detailed directions for
Tap on
(Destination search) in order to view the map in
6.6.3
Map in Navigation mode
After the route was shown in Preview mode, navigation was started.
The map opens in Navigation mode.
1
2
3
4
Here is shown what signposts should be followed.
Possible speed limits may be shown here.
The route is highlighted in orange.
When two manoeuvres need to be executed in quick succession, the
small arrow box indicates the second manoeuvre to be executed.
5
The large arrow box shows a diagram of the next junction which you
should turn on to. The distance remaining to this junction is indicated
underneath.
As you get closer to the junction you will see a spot diagram in addition
to the distance:
- 48 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
The nearer you get to the junction, the more yellow spots are displayed.
If you don't have to change direction for a long time, you will see only a
straight arrow. The distance you must continue straight on is indicated
underneath the arrow.
►
Tap on the large arrow box to hear current route instructions.
6
The Traffic Information box opens if a reported traffic obstruction
affects your route.
If a distance is indicated in the Traffic Information box, no detour route
was calculated yet for the traffic obstruction in question.
►
Tap on the Traffic Information box in order to open the
PREVIEW TMC window. It shows a map view with the route section
affected by the message and a possible detour.
If no distance is indicated, all the obstructions which are reported for
your route and would lead to a loss of time will be avoided.
►
Tap on the Traffic Information box in order to open the TRAFFIC
page 59.)
Note: The calculation of detour routes to avoid reported traffic
obstructions can be performed automatically. (Refer to "TMC Settings"
7
8
The Parking box appears when you are near your destination.
►
Tap on this box in order to select a car park near your destination
as your new destination.
Ahead of many junctions the information from points 9 and 10 is hidden.
Instead you are shown which lanes lead to your destination.
►
Tap on the box in order to hide the lane information.
9
The height above sea level and the current speed are shown here.
10
In the Total box you can see the distance remaining to the destination,
the estimated duration of the trip and the estimated time of arrival.
►
Tap on the arrival time if you want to see the estimated driving time
instead.
►
Tap once again on the info box if you want to see the estimated
time of arrival.
11
Your current position is indicated on the map (orange arrow). The
section of the map displayed changes continually so that your current
position is always in view on the map.
Navigation
- 49 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
12
If you are navigating a multi-leg route, you will see the remaining
distance to the next interim destination and the estimated time of arrival
in the Next box.
►
Tap on the arrival time if you want to see the estimated driving time
instead.
►
Tap once again on the info box if you want to see the estimated
time of arrival.
13
14
The name of the route section that you need to drive onto next is shown
in the upper road box.
The name of the section you are currently driving on is shown in the
lower road box.
Note: The displays of many of the above mentioned areas can be
configured in Options > Settings > Navigation. Some displays will only
function if the required information is available on the map.
Note: If you tap on the large arrow box, the current route instruction will
be repeated.
►
Tap on Options > Route > Turn-by-Turn List in order to view a turn-
►
Tap on
(Destination search) in order to view the map in
Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
1. Tap on
(Volume).
The volume bar opens. It contains three buttons for adjusting the
volume.
(Louder),
(Quieter),
(Volume on/off).
2. Tap on
(Volume) again or wait a few seconds.
The volume bar closes.
Quitting navigation
►
Tap on
(Back) in order to quit navigation.
A dialog box will prompt you to confirm.
- 50 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Map options in Navigation mode
►
Tap on Options. A window with several buttons opens.
The most important functions for navigation can be reached via buttons
with symbols.
Other functions are found by tapping on one of the buttons Destination,
Route, Services or General.
A description of all available options can be found in the chapter
6.6.4
Reality View
The map switches to Reality View mode when you approach one of the
following points while driving on the motorway:
NAVIGON 43xx max (Reality View PRO):
►
►
►
a motorway junction
a three-leg motorway junction
the exit you must take to leave the motorway
NAVIGON 33xx max (Reality View light):
►
the exit you must take to leave the motorway
The Reality View mode shows with greater clarity the signposting and
lanes you must follow.
This display does not change until you have passed the spot indicated.
The map will then change back to Navigation mode.
If you want to change to Navigation mode before then, just tap on any
point on the map.
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
- 51 -
User’s manual NAVIGON 33xx | 43xx max
Note: The Reality View mode is not available for all motorway
junctions and three-leg motorway junctions. Availability depends on the
map material used.
6.6.5
Map in Destination search mode
The map is always in Destination search mode, when a pair of cross
hairs are to be seen. Indicated in the address box are the coordinates
and, where applicable, the name of the street under the cross hairs.
When you are driving, the map does not change. It is always orientated
with north at the top.
Zoom Out: The map section shown becomes larger, but you will see
fewer details.
Zoom In: The map section becomes smaller, but you will see more
details.
Zoom Mode: When this button is active you can mark out a section of
the map with the stylus or your finger.
Mark out the section from upper left to bottom right to zoom in until the
section fills the screen.
Mark out the map section from bottom right to top left to zoom out.
Pan Mode: When this button is active you can change the section of
map displayed with the stylus or your finger. Simply drag the map in the
desired direction.
- 52 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Entire Route: Zooms the map so that the entire route is visible.
Current Position: Selects the section of map displayed so that the
current location is at the centre.
Operating in Destination search mode
1. Tap on the point to which you want to navigate.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap on
(OK).
3. Buttons with various functions will be displayed.
Take Me There: Starts navigation to the selected point. If you are currently
navigating, this route navigation will be cancelled.
MyReport: Opens the MYREPORT window. Here you can notify NAVIGON about
any changes to traffic monitoring systems and routing.
Interim Destination: Sets the selected point as interim destination. The
navigation system will first guide you to this interim destination.
Afterwards you can continue your original navigation.
This function is only active during navigation.
Add to Route: Adds the selected point to the route planning as the last point.
Navigation will then continue to this point after you have reached the
original destination or the other route points.
Save: Opens the SAVE DESTINATION AS... window. You can enter a name
under which the selected point will be saved in the FAVOURITES list.
(Refer to "Saving destinations" on page 38)
Search Nearby: Opens the POI NEARBY window. Here you can search for
Tap on
(Destination search) or on
(Back) in order to
quit Destination search mode. You will be returned to the window
from which you started this mode.
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
- 53 -
User’s manual NAVIGON 33xx | 43xx max
6.7
Useful functions
6.7.1
Nearby
During the navigation, or after having opened the map using the Show
Map button, you can have POIs, Favourites and traffic information of
the current map view shown in a clearly arranged list.
Note: This function is not available if the map was opened in one of the
modes Destination search, Preview or Reality View.
1. Tap on any point on the map.
The NEARBY list opens. It contains POIs, Favourites or traffic
messages of the current map view.
2. Tap on an entry in the list in order to receive detailed information
about it.
You have the following options:
►
Tap on Interim Destination in order to set the selected point as an
interim destination. The navigation system will first guide you to this
interim destination. Afterwards you can continue navigation to your
original destination. The Interim Destination button is available in
navigation mode only.
►
►
Tap on Start Navigation in order to navigate to the selected point.
Tap on Cancel in order to close the list again.
Note: The Nearby function is available only if GPS reception is good
enough.
6.7.2
Direct Help
If you arrive at the scene of an accident or have an accident yourself, it
may be necessary to call for emergency aid and to give the answering
office your current location.
Tap on Options > Direct Help.
The DIRECT HELP window opens.
If GPS reception is good enough, the address and the geographic
cooordinates of your current location will be indicated.
►
Tap on
(Show on Map) if you want to view your current location
on the map.
In the bottom half of the window you will find the buttons for
4 categories: Petrol Station, Police Station, Hospital, Pharmacy.
►
Tap on the corresponding button.
- 54 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
The nearest help point in the selected category will be indicated.
You are shown the name, address, phone number (if known),
distance and direction of the help point from your current location.
You have the following options:
►
Only NAVIGON 4350 max: Tap on the Call button in order to call
the number indicated.
The Call button is not available if no phone number is saved for the
help point or if the navigation device has no Bluetooth connection to
a mobile phone.
►
Tap on the Map button in order to see your location and the help
point on the map. This gives you an overview of the route to the
help point.
►
►
Tap on Start Navigation. You will then be guided directly to the
displayed help point.
You can use the
help points in the selected category.
The help points are sorted by distance from your current position.
(Up) and
(Down) buttons to select other
►
Use the
window.
(Back) button to return to the DIRECT HELP
Note: Only those help points are displayed which are situated no further
than 30 mi from your position.
6.7.3
GPS Status, saving the current location
In the GPS STATUS window you will find an overview of the data the
navigation system calculates from the GPS signals it receives.
The GPS status can be accessed from the options button in many
windows.
1. Tap on Options > GPS Status.
The current location can be saved in the FAVOURITES list.
1. Tap on Save Position.
The SAVE DESTINATION AS... dialog box opens.
2. Enter a name for the destination.
3. Tap on Save.
6.7.4
Block
You can block a leg of the route at any time during a navigation, i.e. to
re-calculate the route in order to avoid the leg, e.g. if you have heard on
the radio of a traffic jam affecting this section.
Navigation
- 55 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Note: The block is valid only for the current navigation. It no longer
exists on a new navigation.
You are currently in a navigation. The map is open in Navigation mode.
1. Tap on Options.
Buttons with various functions will be displayed.
2. Tap on Block.
The BLOCK menu opens. It contains buttons with different distance
values.
3. Select the distance you want to block.
Note: If you are currently driving on a motorway, the alternative route
will begin at the next exit. Indicated on the buttons is the junction up to
which the block extends.
The system recalculates the route. The blocked route section will be
avoided. It is marked on the map in red.
Unblocking a route section
►
Tap on Options > Unblock.
The block will be lifted. The system recalculates the route. The un-
blocked route section can now be integrated into the calculation.
6.7.5
Turn-by-Turn List
You can display detailed directions of the calculated route before
starting navigation or at any time during navigation. This list displays all
of the driving instructions in table form.
The map is open in Preview mode:
►
Tap on Options > Turn-by-Turn List.
The map is open in Navigation mode or in Reality View mode:
►
Tap on Options > Route > Turn-by-Turn List.
The TURN-BY-TURN LIST window opens.
- 56 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
1
2
3
Schematic depiction of the next junction where you must make a turn.
Distance to this junction.
Route instruction and if available the name of the street into which you
must turn.
4
Indicates whether you want to drive on the route section in question or
not.
(Allow): The section in question is allowed on the route.
(Forbid): The section in question is not allowed on the route.
Blocking route sections
1. Tap on the route sections that you do not want to travel on so that
the
(Forbid) symbol appears next to them.
2. Tap on
(Modify Route).
The navigation system calculates an alternative route avoiding the
route sections selected. The new driving instructions are displayed
in the TURN-BY-TURN LIST window.
3. Tap on
window again.
(Back) in order to close the TURN-BY-TURN LIST
Removing blocks and using original routes
Section blocks can be removed at any time.
►
Tap in the TURN-BY-TURN LIST window on Options > Calculate
Original Route.
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
- 57 -
User’s manual NAVIGON 33xx | 43xx max
6.7.6
TMC (Traffic Information)
The integrated TMC receiver enables the navigation system to make
use of current traffic messaging. If necessary it can change your route
dynamically, for example in order to avoid a traffic jam.
Note: TMC is available free of charge in many European countries.
PremiumTMC, promising a faster and more up-to-date service, is
offered (exclusively or in addition) in some countries at a charge.
You can subscribe to PremiumTMC services on our website
Preview TMC
If a new traffic message concerning your route arises while navigation is
in progress, the Traffic Information button will appear at the right edge
of the screen.
Recalculate Route: Automatically
If you have selected Automatically for the Recalculate Route setting, the
button will not show a distance. The traffic obstruction will be avoided
automatically.
Recalculate Route: On Request
If you have selected On Request, the distance to the reported traffic
obstruction will be indicated on the button. The button will turn red if the
distance is less than 50 km.
►
Tap on the
(Traffic Information) button.
The PREVIEW TMC window opens. It shows a map view with the
route section affected by the message. If the reported obstruction is
likely to involve a considerable loss of time, a possible detour will
also be shown.
- 58 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Tap on the button of the route you want to follow.
►
►
- or -
Tap on the Details button.
Note: If you tap on a traffic symbol (in the display:
) in the map view
of the PREVIEW TMC, a window with detailed information about this
message will open. (Refer to "Showing a single message in detail" on
page 60.)
Displaying traffic information
Current traffic information is available via the options button in many
windows.
►
Tap in the NAVIGATION window on Options > Traffic.
The TRAFFIC INFORMATION window opens.
You can use the
messages.
(Up) and
(Down) buttons to scroll in the list of
►
Tap on
(Back) in order to close the TRAFFIC INFORMATION
window again.
1
The Traffic Information button shows the type of traffic messaging listed
and how many messages of this type are in the list.
►
Tap on Traffic Information in order to select the messages you want
displayed.
2
This mark indicates that the message in question comes from a
PremiumTMC provider.
Navigation
- 59 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
3
Here you can see how serious the obstruction is:
Red: The section is blocked by the obstruction. This can be the case for
example with road blocks.
Yellow: The section is not blocked by the obstruction but there is a
threat of considerable delays. This can be the case for example with
traffic jams or when one of several lanes is blocked off.
No colour: The obstruction is not classified as serious. This can be the
case for example when slow-moving traffic is reported on a very short
section, when SOS telephones are not working or when parking areas
are blocked off.
4
5
Here you can see how far you are from this obstruction. If the
obstruction does not lie on your route or if a detour route was already
calculated for this obstruction, then the distance as the crow flies will be
shown.
Here you can see in which state the obstruction lies.
Note: Most radio stations report only traffic obstructions in their own
state.
6
7
8
Here the reported obstruction is displayed as a traffic sign.
Here the affected road is indicated.
Here you can see on which section of the road the obstruction lies.
9
The navigation system can Detour (
the route. The button shows the active status.
Tap on the button to select the alternative setting.
) or Ignore (
) congestion on
►
10
(Show on Map): This button is only available if at least one of the
indicated messages concerns your route. Tap on this button in order to
Showing a single message in detail
Tap on a message to display this information in detail.
The NAVIGON 4350 max announces the traffic message in question if
the detail view is open. The announcement of traffic messages is not
possible in every language however.
►
Tap on the
(Show on Map) button in order to view the section
concerned on the map.
TMC Settings
►
In the Settings window tap on TRAFFIC INFORMATION.
- 60 -
Navigation
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
In the TMC SETTINGS window you can set the TMC traffic station and
configure whether the reception of a traffic message concerning your
route should affect your route planning and if so how.
Tuning Mode
Tap on Tuning Mode and select a method for selecting the TMC radio
station.
►
►
►
Automatic: You can use the arrow keys in the station area to select
another station. The system will search for another station if
reception becomes poor.
Hold station: You can use the arrow keys in the station area to
select another station. The system will search for the same station
on a different frequency if the signal becomes poor.
Hold frequency: You can use the arrow keys in the station area to
select another frequency. The system will not search for another
station if reception becomes poor.
Recalculate Route
Tap on Recalculate Route and select how new traffic messages
concerning your route are to be used.
►
Automatically: An alternative route will be calculated automatically.
The system will inform you on the recalculation.
►
On Request: An announcement from the navigation device tells you
that a traffic message concerns your route. On the screen the
Traffic Information box indicates the distance to the reported traffic
obstruction.
Tap on the Traffic Information box. You can then decide whether an
alternative route is to be calculated or not.
6.7.7
Logbook
You can use the NAVIGON 33xx | 43xx max to record a logbook. The
logbook is recorded in the "Logbook.xls" file. You can open the file with
Microsoft Excel. Each recorded trip is added at the bottom of the table
as a new entry.
The first time a trip is recorded, the "Logbook.xls" file will be created in
the "NAVIGON\Logbook" folder. If you delete or move this file, a new
file will be created when you next record a trip.
Recording trips
You can have all trips recorded automatically.
1. in the NAVIGATION window tap on Options > Settings > Navigation.
2. Set Logbook to Yes.
3. Tap on OK.
Navigation
- 61 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Every trip from now on will be recorded until you reset Logbook to No. It
is possible, however, to exclude individual trips from the recording.
Before a trip
If your trips are recorded in the logbook, a window for entering the trip's
key data is opened before navigation starts. You can also decide,
however, not to record the trip in question.
►
If you don't want to record the trip in question, tap on
(Cancel).
- or -
1. Enter a name for this entry, e.g. "Trip to customerX", in the Logbook
Entry box.
2. Enter the mileage.
3. Tap on Reason for the Trip and select a reason for the trip from the
list of possibilities.
7
Handsfree Module
(only NAVIGON 4350 max)
The hands-free module supports Bluetooth connections to Bluetooth-
capable mobile phones and headsets.
If you have set up a connection to a mobile phone, you can use the
NAVIGON 4350 max as a hands-free module for your mobile phone.
If you have set up a connection to a Bluetooth headset, you will hear
the voice instructions from the navigation software via the headset. This
is useful for example when travelling on a motorcycle. All other
functions described in this chapter are not available when connected to
a headset.
A compatibility list of all supported mobile phones can be found on our
Opening the hands-free module
►
Tap in the navigation application on
(Phone).
The HANDSFREE MODULE window opens.
When you start the Bluetooth application for the first time, a window will
open in which you can start a search for Bluetooth-capable devices.
►
Tap on Yes if you want to start the search now and set up a
connection to your mobile phone or your headset. As soon as the
- 62 -
Handsfree Module (only NAVIGON 4350 max)
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
NAVIGON 4350 max has found your Bluetooth device you can
►
Tap on No if you want to initiate the connection later. (See chapter
Operating the hands-free module
All functions can be reached from the HANDSFREE MODULE window.
►
►
Tap on
(Navigation) in order to move the navigation
application into the foreground.
Tap on
(Back) in order to close the hands-free module and
return again to the previously opened window.
7.1
Connection with Mobile Phone
For you to be able to use the Bluetooth function of the
NAVIGON 4350 max, the navigation device must be connected to the
Bluetooth device.
Note: Both the NAVIGON 4350 max and the mobile phone must be
configured accordingly in order for a Bluetooth connection to be set up
between the two devices. Headsets are suitably configured at the
factory.
For details of how to configure the NAVIGON 4350 max refer to the
For details of how to configure the mobile phone or headset refer to the
related manual issued by the manufacturer.
7.1.1
Searching for and pairing Bluetooth devices
Pairing is the term used for setting up a coded connection between two
Bluetooth devices. This requires each of the two devices to send the
same password to respectively the other device. The password and the
connection data are saved on both devices, which means that pairing is
necessary once only when the connection is set up for the first time.
Paired devices are saved in the TRUSTED DEVICES list .
The NAVIGON 4350 max can connect automatically to the last
connected device as soon as it is within range.
The hands-free module of the NAVIGON 4350 max can save and
manage the connection data of up to three paired mobile phones and
one headset. From each paired mobile phone it is possible to import the
phone book and recent calls and to save this information with the
connection data.
Handsfree Module (only NAVIGON 4350 max)
- 63 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Note: In this case the phone book and recent calls are only available
when the phone in question is connected. For details of how to import
the phone book and recent calls refer to the chapters "Import Phone
Searching for devices
1. Make sure that the Bluetooth function is activated on both the
mobile phone and the NAVIGON 4350 max. If you want to set up a
connection to a headset, the headset must be switched on.
Additional information can be found in the manual issued for the
headset.
2. Tap in the HANDSFREE MODULE window on the
(Trusted
Devices) button.
The TRUSTED DEVICES window opens.
3. Tap on Options > Search for Devices.
The navigation device starts the search for Bluetooth devices and
lists all the devices it recognises in the DISCOVERED DEVICES
window. The symbol to the left of the device name indicates
whether the device is a mobile phone or a headset.
Pairing with a device
4. Tap in the DISCOVERED DEVICES window on the
(Connect)
button or on the name of the device you want to connect to.
►
If pairings already exist with three mobile phones or a headset, you
will now be prompted to delete a device from the TRUSTED DEVICES
5. The navigation device prompts you to enter a password.
►
If you are setting up a connection to a mobile phone, enter a
password (1–16 digits) in the Key box and tap on
enter the same password on the mobile phone.
(OK). Then
►
If you are setting up a connection to a headset, enter the headset
password. This password and additional information about pairing
can be found in the manual issued for the headset.
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the TRUSTED
DEVICES list. (Green symbol.)
- 64 -
Handsfree Module (only NAVIGON 4350 max)
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
7.1.2
Pairing from the mobile phone
Note: Please consult the mobile phone's manual if you are uncertain
about how to carry out the following steps on the mobile phone.
1. Make sure that the Bluetooth function is activated on both, the
mobile phone and the NAVIGON 4350 max. To perform the pairing
from the mobile phone, the functions Discoverable by Others and
Others May Connect must also be activated on the
NAVIGON 4350 max.
2. Using your mobile phone, search for other Bluetooth devices.
The navigation device is detected as NAVIGON.
3. Initiate a connection to the detected NAVIGON device.
The mobile phone prompts you to enter a password.
4. Enter a password (1-16 digits).
The NAVIGON 4350 max prompts you to enter a password.
5. Enter the same password in the Key box as on the mobile phone
and tap on
(OK).
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the TRUSTED
DEVICES list. (Green symbol
(Connected).)
7.1.3
Connecting to a device
The word connect describes any subsequent connections between
paired Bluetooth devices. No further password entry is necessary when
connecting.
Connecting automatically
Note: For automatic connection to be possible, the
NAVIGON 4350 max must be saved in the Bluetooth settings on your
mobile phone as "authorised" or "authorised device" (the exact wording
can vary from manufacturer to manufacturer). For more details refer to
your mobile phone manual.
If the device you want to connect to was the last connected device and
the Reconnect Automatically setting is activated, the connection will be
set up automatically as soon as the device is within range.
Connecting manually
If a Bluetooth connection to a device is active, you must disconnect this
connection first before you can connect to a different device. The
Handsfree Module (only NAVIGON 4350 max)
- 65 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
existing connection is disconnected automatically as soon as the
connection to a different device is initiated.
1. Make sure that Bluetooth is activated on your navigation device.
►
If you want to connect to a mobile phone, make sure that Bluetooth
is activated on the mobile phone and that the Discoverable by
Others and Others May Connect functions are also activated.
►
If you want to connect to a headset, make sure that the headset is
switched on.
2. Tap on the
MODULE window.
The TRUSTED DEVICES window opens. A currently connected device
(Trusted Devices) button in the HANDSFREE
is indicated by the green symbol
(Connected).
3. Tap in the TRUSTED DEVICES window on the
(Connect) button
or on the name of the device you want to connect to.
If a connection currently exists to a different device, the connection
will be disconnected. The NAVIGON 4350 max connects to the
selected device.
7.1.4
Deleting a device
You can delete the connection data of paired devices. The device is
then no longer shown in the TRUSTED DEVICES list. If you imported the
phone book or recent calls from this device, these data will be deleted
from the navigation device.
1. In the HANDSFREE MODULE window, tap on
The TRUSTED DEVICES window opens.
2. Tap on Options > Delete Device.
The DELETE DEVICE window opens.
(Trusted Devices).
3. Tap on the
want to delete.
(Delete Device) button to the right of the device you
You will be requested to confirm deletion.
4. Tap on Yes.
The device is deleted from the TRUSTED DEVICES list.
7.1.5
Import Phone Book
For each paired mobile phone in the TRUSTED DEVICES list it is also
possible to import its phone book and save it together with the
connection data. Access to the phone book of a mobile phone is then
only possible when the NAVIGON 4350 max is connected to the mobile
- 66 -
Handsfree Module (only NAVIGON 4350 max)
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
phone from which the phone book was imported. As soon as you
connect to a different phone or disconnect the connection, the phone
book will no longer be available on the hands-free module.
1. Set up a connection to the mobile phone whose phone book you
want to import. (See chapter "Connecting to a device" on page 65)
2. Tap in the HANDSFREE MODULE window on the Phone Book button.
The phone book import is started. Depending on the size of the
phone book this can take some time. When the import is completed,
the phone book is opened.
Note: It can take come time to import a phone book depending on its
size. During the import you can move the Bluetooth application into the
background in order e.g. to show the map during navigation. Tap in the
window opened during the import on the To background button in order
to move the navigation application into the foreground.
Editing and updating a phone book
The phone book cannot be edited in the hands-free module. If you want
to change or delete an entry in the phone book, you must make the
changes on your mobile phone and then update the phone book on the
hands-free module. The phone book is re-imported for the update.
1. Set up a connection to the mobile phone whose phone book you
want to update. (See chapter "Connecting to a device" on page 65)
2. Tap in the HANDSFREE MODULE window on the Phone Book button.
The phone book of the connected phone is opened.
3. Tap on Options > Refresh.
The phone book import is started.
Note: Deleting the complete phone book is possible only by deleting the
book and the recent calls are deleted and you will have to repeat the
pairing operation in order to set up a connection to the device again.
For more details about the phone book refer to the chapter "Calling a
7.1.6
Import recent calls
For each paired mobile phone in the TRUSTED DEVICES list it is also
possible to import its recent calls and save them together with the
connection data. Access to the recent calls of a mobile phone is then
only possible when the NAVIGON 4350 max is connected to the mobile
phone from which the recent calls were imported. As soon as you
Handsfree Module (only NAVIGON 4350 max)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 67 -
User’s manual NAVIGON 33xx | 43xx max
connect to a different phone or disconnect the connection, the recent
calls will no longer be available on the hands-free module.
1. Set up a connection to the mobile phone whose recent calls you
want to import. (See chapter "Connecting to a device" on page 65)
2. Tap in the HANDSFREE MODULE window on the Recent Calls button.
The recent calls import is started. When the import is completed,
the recent calls are shown.
7.2
Taking a call
When you receive a call, the INCOMING CALL window will open. The
name and the number of the caller will be displayed if this information is
available. (If the caller's number is displayed but does not exist in the
phone book, Unknown caller will be displayed instead of the name. If
the number is suppressed, Phone number hidden will be displayed.)
►
Tap on Accept if you want to take the call.
The CALL IN PROGRESS window opens.
►
Tap on Reject if you do not want to take the call.
Note: Navigation instructions are muted during a call.
7.3
Making a call
With the NAVIGON 4350 max you can make a call in various ways:
7.3.1
Dialling a telephone number
1. Tap in the HANDSFREE MODULE window on the Keyboard button.
The TELEPHONE NUMBER window opens.
2. Enter the desired telephone number.
3. Tap on the Call button.
7.3.2
Dialling a Speed Call number
You can configure 4 Speed Call buttons.
►
Tap in the HANDSFREE MODULE window on the corresponding
Speed Call button.
Note: If no number has been entered for the Speed Call button selected
or if no Bluetooth connection has been established to a mobile phone,
the MODIFY PRESET window will open.
- 68 -
Handsfree Module (only NAVIGON 4350 max)
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
7.3.3
Calling a contact from the phone book
If the NAVIGON 4350 max is connected to a mobile phone whose
phone book was already imported, you can also dial numbers from the
phone book.
1. In the HANDSFREE MODULE window tap on Phone Book.
If the phone book of the connected phone was not yet imported, the
2. Select from the phone book the contact you want to call.
3. Tap on
(OK).
The SELECTED PHONE BOOK ENTRY window opens. It shows all the
phone numbers and addresses which have been saved for the
selected contact.
4. Tap on the
to dial.
(Call) button alongside the phone number you want
7.3.4
Calling most recently dialled, received or missed numbers
Note: The RECENT CALLS list contains outgoing, incoming and
unanswered calls. Incoming and unanswered calls can be dialled only if
the caller's number was transmitted.
1. Tap in the HANDSFREE MODULE window on the Recent Calls button.
►
If the recent calls on the connected phone were not yet imported,
the import will be started now; refer to "Import recent calls" on
page 67.
The RECENT CALLS list opens. The entries are sorted
chronologically; the symbols to the right of the entry indicate the
type of call:
(Missed calls) (orange)
(Incoming calls) (white)
(Outgoing calls)
2. Tap on the entry you want.
Note: The RECENT CALLS list is available to the hands-free module only
for as long as the hands-free module is connected to the mobile phone.
It is updated automatically each time it is opened.
Handsfree Module (only NAVIGON 4350 max)
- 69 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
7.3.5
Transferring a call from your mobile telephone
The NAVIGON 4350 max takes calls automatically from the mobile
phone as soon as a Bluetooth connection is established between the
two devices.
7.4
During a call
You are calling using the hands-free module. The CALL IN PROGRESS
window is open.
7.4.1
Moving the navigation application to the foreground
You can move the navigation application to the foreground at any time.
In this way you can have the map with the navigation instructions in the
foreground during a call when the NAVIGON 4350 max is in the
process of navigating.
►
Tap on the
(Navigation) button.
While a call is in progress, the
(Call in Progress) symbol is visible
in the top right corner of the display.
►
Tap on the
button (Phone) in order to open the CALL IN
PROGRESS window again.
7.4.2
Entering numbers
You can enter numbers during a call. This may be the case, for
example, if a further connection via a telephone system is necessary.
1. Tap on Keyboard.
2. Enter the desired numbers.
3. Tap on
window.
(Back) in order to open the CALL IN PROGRESS
7.4.3
Muting the microphone
During the call, you can mute the microphone so that you can talk to
someone without the interlocutor hearing.
►
►
In the CALL IN PROGRESS window, tap on
switch off the microphone.
(Muting) to
The interlocutor is no longer able to hear you. The modified icon on
the button indicates this.
Tap on
(Muting) to switch the microphone on again.
- 70 -
Handsfree Module (only NAVIGON 4350 max)
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
7.4.4
7.4.5
Transferring a call to the mobile phone
►
Tap in the CALL IN PROGRESS window on Options > Use Mobile
Phone.
You can now continue the call from your mobile phone.
Ending the call
►
Tap in the CALL IN PROGRESS window on the Hang up button in
order to end the call.
7.5
Useful functions
7.5.1
Navigating to a contact from the phone book
You can also use the address of a contact in the phone book as a
destination for the navigation system.
1. In the HANDSFREE MODULE window tap on Phone Book.
2. Select from the phone book the contact you want to navigate to.
3. Tap on
(OK).
The SELECTED PHONE BOOK ENTRY window opens. It shows up to
two addresses and up to four phone numbers which have been
saved for the selected contact.
4. Tap on the
(Start Navigation) button alongside the address you
want to navigate to.
You can also select addresses from the phone book in the navigation
software to act as destinations. For more details refer to the chapter
on page 34.
7.6
Configuring the hands-free function
The hands-free module of the NAVIGON 4350 max contains a number
of settings that can be individually configured.
For information about configuring the settings in this window refer to
7.6.1
Preset
The hands-free module of the NAVIGON 4350 max contains four
Speed Call buttons that can be individually configured.
1. Tap in the HANDSFREE MODULE window on Options > Modify Preset.
Handsfree Module (only NAVIGON 4350 max)
- 71 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
The PRESET window opens.
2. Tap on the
to define.
(Edit) button to the right of the Speed Call you want
The MODIFY PRESET window opens.
Entering a new Speed Call number or editing an existing Speed Call
number
3. Tap on the
(Modify Preset) button.
4. Enter the name and the number for the selected Speed Call button
or edit the existing name and number.
5. Tap on OK.
Adopting a number from the phone book of the mobile phone
3. Tap on the From the phone book button. This button is deactivated
when there is no connection to a mobile phone.
4. Enter the name of the contact you want to adopt for the Speed Call.
5. Tap on
(OK).
The SELECT PHONE NUMBER window opens. It shows all the phone
numbers saved for the selected contact.
6. Tap on the phone number you want to use for the Speed Call.
Deleting a Speed Call number
3. Tap on the (Delete) button.
4. Confirm that you want to delete the Speed Call number.
The PRESET window opens again. No phone numbers and no name
exist any longer for the selected Speed Call button.
7.6.2
Settings
In the SETTINGS window you can configure the settings for the phone
functions of the hands-free module of your NAVIGON 4350 max.
►
Tap in the HANDSFREE MODULE window on Options > Settings.
The SETTINGS window opens.
Volume of the Phone Call: The volume of the phone call can be controlled
independently of the volume of the navigation application.
Volume of the Ring Tone: The volume of the ring tone can be controlled
independently of the volume of the navigation application.
- 72 -
Handsfree Module (only NAVIGON 4350 max)
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Bluetooth Function: Select whether you want to activate the Bluetooth function
(Yes or No).
The hands-free module cannot connect to a mobile phone or headset if
the Bluetooth function is deactivated.
Discoverable by Others: Select whether other Bluetooth-capable devices (in
particular mobile phones) should be able to detect the
NAVIGON 4350 max (Yes or No).
Others May Connect: Select whether other devices should be able to initiate a
connection (Yes or No).
Reconnect Automatically: Select whether the connection to the last connected
phone is to be restored automatically (Yes or No) as soon it comes
within range again.
Note: In order for the last connection to be restored without further
questioning, the navigation device must be saved in your mobile phone
as "authorised" or "authorised device" (the exact wording can vary from
manufacturer to manufacturer).
Note: The Discoverable by Others and Others May Connect settings
are effective only when the Bluetooth function is activated.
A Bluetooth connection can be established from the mobile phone only
when Yes is selected for both settings.
8
Configuring the
NAVIGON 33xx | 43xx max
The SETTINGS window is the starting point for customising the
NAVIGON 33xx | 43xx max to match your personal preferences.
Settings can be accessed via the options in the NAVIGATION window
and via the options in many windows of the navigation application.
►
Tap on Options > Settings.
The SETTINGS window of the navigation application has several buttons:
Navigation, Route Profile, Map Display and General.
►
Tap on a button to open the corresponding settings window.
The settings of the individual windows are distributed over several
screen pages. You can toggle between them with the (To the Left)
and (To the Right) buttons.
Configuring the NAVIGON 33xx | 43xx max
- 73 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Some settings can have only one of two values. These settings can be
recognised by the (Toggle) button. All possible values are visible.
The currently valid value is highlighted in white.
►
Tap on
values.
(Toggle) in order to switch between the possible
Some settings can adopt many different values. These settings can be
recognised by the (List) button. The current value is visible.
1. Tap on
(List).
A list with all possible values opens. The currently valid value is
marked.
2. Tap on the value you want. It is now marked.
3. Tap on OK.
The list closes. The new value is indicated.
For each setting there is a
(Help) button. When you tap on it you
will see an exact definition of the setting in question.
You can close the settings windows in two ways:
►
►
Tap on OK.
Any changes you have made will be adopted.
Tap on Cancel.
Any changes you have made will not be adopted.
- 74 -
Configuring the NAVIGON 33xx | 43xx max
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
9
Appendix
9.1
Technical data
Dimensions
Weight
118.8 x 75.5 x 21.5 mm
approx. 170 g
Operating
temperature
Storage
temperature
Humidity
-10°C to 60°C (14°F to 140°F)
-20°C to 70°C (-4°F to 158°F)
Operating
conditions
0% to 90%, non-precipitating
Sirf ATLAS IV (ARM 11), 500MHz
Microsoft Windows CE 6.0
4.3” LCD colour display with resistive
touch-panel
CPU
Operating system
Display
480 x 272 pixel (WQVGA)
Landscape, transmissive
NAVIGON 3300 max: 1 GB
NAVIGON 3310 max: 2 GB
NAVIGON 4310 max: 2 GB
NAVIGON 4350 max: 2 GB
NAVIGON 33xx max: 64 MB
NAVIGON 4310 max: 64 MB
NAVIGON 4350 max: 128 MB
Yes (SiRF 3i+)
Flash
RAM
Memory
GPS
Built-in antenna
TMC
Yes
Device keys
1 (On/Off)
Keyboard
Loudspeaker
Microphone
Memory card
USB
Software keyboard
Yes
Yes
microSD
I/O
USB 2.0
(Only NAVIGON 4350 max)
Integrated (CSR BlueCore BC05MM)
with echo compensation and noise
suppression
Bluetooth
Power supply
Via USB socket
Rechargeable Type
Li-Ion /Li-Po, 1300 mAh
Up to 2 hours
Integrated
battery
Running time
Electronic
Duration
Input
Charging
approx. 3-4 hours
Power pack
(accessories)
Car charger
cable
100-240V ~ (alternating current, AC)
5V / 1A = (direct current, DC)
10-24V = (direct current, DC)
5V / 1A = (direct current, DC)
Output
Input
Output
Appendix
- 75 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
9.2
Identification and serial number
The navigation system comes with various identification labels (e.g. CE
label, serial number, ...). These labels are located on the bottom of the
device in the area of the charge pilot lamp (LED).
9.3
Declaration of conformity
The NAVIGON 33xx | 43xx max described in this manual bears the CE
label among others.
Products with the CE marking comply with Radio & Telecommunication
Terminal Equipment Directive (R&TTE) (1999/5/ECC), the
Electromagnetic Compatibility Directive (89/336/ECC) and the Low
Voltage Directive (73/23/ECC) – as amended by Directive 93/68/ECC –
issued by the European Community Commission.
Compliance with these directives implies conformity with the following
European Standards:
EN 300328 V 1.7.1, EN 300440 V 1.1.2, EN 301489-1 V 1.6.1,
EN 301489-3 V 1.4.1, EN 301489-17 V 1.2.1, EN 50371: 2002,
EN 55022: 2006, Class B, EN 55024: 1998 + A1: 2001 + A2: 2003,
EN 60950-1: 2001 + A11: 2004, EN 61000-3-2: 2006, Class D,
EN 61000-3-3: 1995 + A1: 2001 + A2: 2005,
EN 61000-4-2: 1995 + A1: 1998 + A2: 2000,
EN 61000-4-3: 2002 + A1: 2002, EN 61000-4-4: 2004,
EN 61000-4-5: 1995 + A1: 2000, EN 61000-4-6: 1996 + A1: 2000,
EN 61000-4-8: 1993 + A1: 2000, EN 61000-4-11: 2004
The manufacturer is not liable for modifications made by the user which
may alter the device's conformity with the applicable directives and
standards, nor for the consequences thereof.
10
Troubleshooting
In this chapter you will find solutions to problems which may arise
during use of the NAVIGON 33xx | 43xx max.
This list does not claim to be complete. Answers to many other
questions can be found on the NAVIGON AG website. (Refer to
I have connected the NAVIGON 33xx | 43xx max to a computer but it is not
detected as a removable disc.
The USB connector is not fully inserted in the case.
1. Unplug the connector.
The navigation device will carry out a new start. Wait for the
navigation software to be reloaded.
2. Without delay, insert the USB connector from the charger into the
corresponding socket of the NAVIGON 33xx | 43xx max as far as it
- 76 -
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
page 8)
My NAVIGON 33xx | 43xx max makes no response any longer, the screen
is frozen.
Perform a reset. This can be done in two ways:
►
- or -
1. Press the
switches off. (Approx. 4 seconds.)
The device is now deactivated.
(On/Off) key and keep it pressed until the device
2. Press the
(On/Off) key and keep it pressed until the device
switches on again. (Approx. 1.5 seconds)
The software will be restarted. Your settings and your saved
destinations and routes will be retained.
Note: Use only accessories which are recommended by NAVIGON
expressly for the NAVIGON 33xx | 43xx max. NAVIGON AG accepts
no liability for errors or damages resulting from the use of other
accessories.
dealer.
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
- 77 -
User’s manual NAVIGON 33xx | 43xx max
11
Index
Destination
B
My Destinations............................ 24
New Destination ........................... 24
POI ............................................... 27
in a City .................................... 30
Nationwide ............................... 29
Nearby...................................... 28
Save ............................................. 38
Start Navigation............................ 36
Take Me Home....................... 35, 38
Turn-by-Turn List.......................... 36
Direct Help ........................................ 54
Block............................................ 55, 57
Bluetooth
Connect ........................................ 65
Pairing........................................... 63
C
Call
Dial Number.................................. 68
Phone Book .................................. 69
Preset ........................................... 68
Recent Calls ................................. 69
Call in Progress
Enter numerals ............................. 70
Hang up ........................................ 71
Muting........................................... 70
Show Map..................................... 70
Use handsfree .............................. 70
Use Mobile Phone ........................ 71
Compass ........................................... 18
Configuration..................................... 73
Connect............................................. 65
Connection with Mobile Phone.......... 63
Conventions followed in this
E
Energy......................................... 12, 19
Enter Coordinates............................. 27
Entering data..................................... 21
F
Favourites ................................... 32, 37
G
GPS
manual................................................. 6
Current Position
Save.............................................. 55
Faulty reception............................ 22
Initialise......................................... 23
Signals.......................................... 13
Symbols........................................ 18
GPS Status ....................................... 55
D
Data entry.......................................... 21
Destination
H
Direct Access................................ 31
Enter Coordinates......................... 27
Favourites..................................... 32
From Map ..................................... 35
From the phone book.................... 71
Home Address........................ 35, 38
Imported Addresses
From Outlook............................ 33
From the phone book ............... 34
From the phone book ............... 71
Last Destinations .......................... 33
Handsfree Module
Call ............................................... 68
Call in Progress ............................ 70
Connect ........................................ 65
Connection with Mobile Phone..... 63
Delete Device ............................... 66
Dial Number.................................. 68
Enter numerals ............................. 70
Hang up........................................ 71
Import Phone Book....................... 66
Import recent calls ........................ 67
- 78 -
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Handsfree Module
Menu ................................................. 22
Muting ............................................... 20
My Destinations................................. 24
MyRoutes.................................... 36, 43
Incoming Call................................ 68
Muting........................................... 70
Open............................................. 62
Pairing........................................... 63
Phone Book .................................. 69
Preset ..................................... 68, 71
Recent Calls ................................. 69
Settings................................... 71, 72
Show Map..................................... 70
Symbols........................................ 19
Use handsfree .............................. 70
Use Mobile Phone ........................ 71
Home Address
N
Navigation
Block....................................... 55, 57
MyRoutes ............................... 36, 43
No GPS .................................. 37, 43
Route Profile........................... 36, 42
Start........................................ 36, 42
Start Navigation............................ 37
Turn-by-Turn List.................... 36, 42
Unblock......................................... 56
Navigation Application
Edit................................................ 39
Home Address............................. 35, 38
Hotline ................................................. 7
Start.............................................. 23
NAVIGON 33xx | 43xx max
I
Description...................................... 8
Energy .......................................... 12
Installation .................................... 10
Memory card................................. 13
Scope of Delivery ........................... 7
Start.............................................. 14
TMC.............................................. 13
New Destination................................ 24
Imported Addresses
From Outlook................................ 33
From the phone book.................... 34
K
Keyboard........................................... 20
O
L
Options.................................. 16, 22, 43
Last Destinations......................... 33, 37
Logbook............................................. 61
P
M
Pairing............................................... 63
Password Lock.................................. 16
Phone................ see Handsfree Module
Phone Book
Import Phone Book....................... 66
Refresh......................................... 67
Phone Book....................................... 69
POI
Direct Access................................ 31
in a City......................................... 30
Nationwide.................................... 29
Nearby.......................................... 28
Manual
Conventions.................................... 6
Symbols.......................................... 6
Manual............................................... 16
Map
Destination search........................ 52
Navigation..................................... 48
Preview......................................... 46
Reality View.................................. 51
Memory card ..................................... 13
Index
- 79 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual NAVIGON 33xx | 43xx max
Preset................................................ 71
Preview TMC..................................... 58
Simulation
Exit................................................ 42
Start.............................................. 41
Software keyboard............................ 20
Support................................................ 7
Symbols used in this manual .............. 6
R
Reality View....................................... 51
Recalculate Route............................. 61
Recent Calls
Import recent calls ........................ 67
Recent Calls...................................... 69
Route Planning.................................. 39
Route points
Add ............................................... 40
Delete ........................................... 41
Order............................................. 40
Starting Point ................................ 40
Route Profile................................ 36, 42
Routes
T
Take Me Home............................ 35, 38
TMC
Preview TMC................................ 58
Recalculate Route ........................ 61
Show............................................. 59
Symbols........................................ 18
Tuning Mode................................. 61
TMC Settings
Recalculate Route ........................ 61
TMC.............................................. 60
Traffic Information......................... 60
Tuning Mode................................. 61
Trade marks........................................ 6
Traffic Information
Preview TMC................................ 58
Recalculate Route ........................ 61
Show............................................. 59
Tuning Mode................................. 61
Troubleshooting ................................ 76
Tuning Mode ..................................... 61
Turn-by-Turn List
Manage......................................... 41
Planning........................................ 39
Route points.................................. 40
Route Profile................................. 42
Save.............................................. 41
Show............................................. 41
Simulation..................................... 41
Start Navigation ............................ 42
Starting Point ................................ 39
Turn-by-Turn List .......................... 42
S
Block............................................. 57
Show................................. 36, 42, 56
Safety information ............................... 8
Scope of Delivery ................................ 7
Service ................................................ 7
Settings
U
Configuration ................................ 73
Handsfree Module ........................ 72
Volume.......................................... 50
Settings Handsfree Module
Unblock ............................................. 56
V
Connection with Mobile Phone ..... 63
Delete Device ............................... 66
Preset ........................................... 71
Volume........................................ 50, 63
W
Warranty.............................................. 6
- 80 -
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
|