Navigon GPS Receiver 13xx User Manual

User’s manual  
NAVIGON 13xx | 23xx  
English (United Kingdom)  
April 2009  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User’s manual NAVIGON 13xx | 23xx  
Table of contents  
User’s manual  
Table of contents Š III  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User’s manual NAVIGON 13xx | 23xx  
User’s manual  
Table of contents Š IV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User’s manual NAVIGON 13xx | 23xx  
1
Introduction  
1.1  
About this manual  
1.1.1  
Conventions  
For better legibility and clarification, the following styles are used in this  
manual:  
Bold and italics:  
Product names  
SMALL CAPITALS:  
Window and dialogue box titles  
Highlighting of important parts in the text  
Bold:  
Underlined:  
Names of buttons, input boxes and other elements  
on the user interface  
Underlined and italics:  
Names of control elements on the navigation device  
1.1.2  
Symbols  
The following symbols refer to specific passages of text:  
Instructions and tips for operating the software  
More detailed information and explanations  
Warnings  
1.2  
Legal notice  
Liability  
1.2.1  
The software and manual are subject to change without notice.  
NAVIGON AG is not liable for the accuracy of the information contained  
in this manual or for damages resulting from the use of this manual.  
Suggestions for improvements and information regarding errors are  
always welcome so that we can supply you with even better products in  
the future.  
1.2.2  
Trade marks  
All brand and trade marks mentioned in this document and registered  
by third parties are subject without reservation to copyright law and the  
proprietary rights of their respective owners. All trade marks, trade  
Introduction  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
User’s manual NAVIGON 13xx | 23xx  
names and company names used in this document are or may be trade  
marks or registered trademarks of their respective owners. All rights  
reserved except those explicitly granted.  
If the registered trade marks used in this manual are not explicitly  
identified as such, this does not imply that the name is not subject to the  
rights of a third party.  
Microsoft, Outlook, Excel and Windows are registered trade marks of  
the Microsoft Corporation.  
NAVIGON is a registered trade mark of NAVIGON AG.  
1.3  
Questions about the product  
You have a question concerning your product? Then visit our webseite  
www.navigon.com and click on "Support". There you will find an area  
with frequently asked questions (FAQ Center) along with details of how  
to contact us by phone or e-mail.  
Manuals as PDF files  
Manuals in PDF format can also be found in the internal memory of the  
navigation device. Connect the navigation device by cable to a PC in  
order to read or copy these files.  
2
Before you begin  
2.1  
Scope of Delivery  
Please check that the contents are complete. If anything is missing, get  
in touch immediately with the dealer who sold you the product.  
The purchased product includes the following:  
NAVIGON 13xx | 23xx navigation device  
Car cradle (in parts, refer to "Assembling the cradle" on page 10)  
Car charger cable (10-24V: adapter for the vehicle's cigarette  
lighter). (NAVIGON 23xx: with integrated TMC antenna)  
USB cable  
Leaflet with illustrated installation instructions  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 6 -  
       
User’s manual NAVIGON 13xx | 23xx  
2.2  
Description of the NAVIGON 13xx | 23xx  
1
Touch-screen (refer also to "Safety information for the  
2
3
4
5
Slot for microSD memory card  
Mini USB socket for USB cable / car charger cable  
Reset (refer also to "Troubleshooting" on page 63)  
On/Off  
2.3  
Important safety information  
In your own interest, please read the following safety information and  
warnings carefully before starting up your navigation system.  
2.3.1  
Navigation safety information  
Use the navigation system at your own risk.  
Caution! To prevent accidents, do not operate the navigation system  
while driving.  
Caution! Do not look at the display unless it is absolutely safe to do so!  
Caution! Traffic regulations have priority over any instructions from the  
navigation system.  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 7 -  
         
User’s manual NAVIGON 13xx | 23xx  
Caution! Follow the instructions of the navigation system only when the  
circumstances and the road traffic regulations allow you to do so! The  
navigation system will still guide you to your destination even if you  
deviate from the calculated route.  
Caution! Check that the cradle is secured and adjusted properly before  
each journey.  
Note: If you have not understood the spoken instructions or are unsure  
about what to do next, you can refer briefly to the map or schematic  
view of your navigation system.  
2.3.2  
Safety information for the navigation device  
Caution! Protect the device from moisture. The device is neither  
waterproof nor protected against splash water.  
Caution! Do not open the case of the navigation device under any  
circumstances.  
Caution! Do not expose the navigation device to extreme heat or cold.  
This may damage the device or impair its function. (Refer to "Technical  
data" on page 62)  
Caution! Never unplug by pulling the cable. Doing so could severely  
damage or destroy the device.  
Caution! Do not operate the touchscreen with sharp-edged or pointed  
objects. Use only your finger to operate the touchscreen.  
Note: Do not kink the cable. Make sure that the cable cannot be  
damaged by sharp-edged objects.  
Note: Clean the navigation device only with a damp cloth.  
Note: Create a backup of the data in the internal memory of your  
navigation device.  
This is very easy to do with the NAVIGON Fresh software which can be  
downloaded free of charge from the website www.navigon.com.  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 8 -  
   
User’s manual NAVIGON 13xx | 23xx  
2.3.3  
Safety guidelines when installing the device in your car  
Caution! Fasten the cradle so that the navigation device is easy to see  
and operate by the driver. Make sure that the driver's view of the traffic  
is not impeded.  
Caution! Do not attach the cradle within the working zone of any  
airbags.  
Caution! Do not fasten the cradle too close to the steering wheel or  
other controls. The driver must not be obstructed in operating any car  
functions.  
Caution! When installing the cradle, make sure that it will not pose a  
risk in the event of an accident.  
Caution! Do not run cables directly next to safety-relevant devices and  
power supplies.  
Caution! Check that the cradle is secured and adjusted properly before  
each journey. The suction cup may become loose after a while.  
Caution! After installation, check all safety-relevant equipment in the  
car.  
Caution! Connect the car charger cable only to cigarette lighters with  
an operating voltage of 10-24V.  
Caution! Disconnect the car charger cable from the cigarette lighter  
whenever you park the car. The integrated mains adapter always  
consumes a small amount of energy and could drain the car battery.  
2.4  
Preparing the NAVIGON 13xx | 23xx for use  
2.4.1  
Installing the navigation system in the vehicle  
Caution! Be sure to refer to all the safety information in chapter  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 9 -  
       
User’s manual NAVIGON 13xx | 23xx  
Assembling the cradle  
Assemble the cradle as shown in the illustration. No tools are  
needed for this.  
Securing the cradle  
1. Clean the suction cup and that part of the windscreen to which you  
want to secure the cradle. Both must be dry and free of dirt and  
grease.  
2. Open the lever on the suction cup as far as possible.  
3. Place the cradle suction cup against the windscreen.  
4. Press the lever towards the windscreen.  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 10 -  
 
User’s manual NAVIGON 13xx | 23xx  
Inserting the navigation device into the cradle  
1. Hang the navigation device by the upper recess on the upper lug of  
the cradle. (See illustration)  
2. Then press it towards the cradle so that it latches in place.  
Supplying power to the navigation device  
Included in delivery of the NAVIGON 13xx | 23xx is a car charger cable  
with which power can be supplied to the navigation device via the  
vehicle's cigarette lighter.  
Connect the car charger cable to the vehicle's cigarette lighter and  
to the mini USB socket of the navigation device.  
Note: Plug the USB connector into the navigation device as far it will  
go! (Refer to "Troubleshooting" on page 63.)  
Caution! Connect the car charger cable only to cigarette lighters with  
an operating voltage of 10-24V.  
Note: It takes approx. 2-3 hours to charge the device when the battery  
is flat.  
A fully charged battery enables up to 1 hours of use depending on the  
device configuration.  
Removing the navigation device from the cradle  
On the bottom of the plate in which you hung the navigation device is a  
clip.  
1. Pull the clip towards yourself so that the device is released from the  
clip.  
2. Lift the device up and out of the cradle.  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 11 -  
User’s manual NAVIGON 13xx | 23xx  
2.4.2  
2.4.3  
TMC antenna (only NAVIGON 23xx)  
The NAVIGON 23xx has an integrated TMC receiver. The TMC  
antenna is integrated in the car charger cable. Once the car charger  
cable is connected, the device can receive current traffic messages. If  
required, it can change your route dynamically, e.g. in order to avoid a  
traffic jam.  
Memory card  
If you purchase additional navigation maps but no longer have enough  
space for them in the internal memory of your navigation device, it is  
also possible for you to save these maps on a memory card (microSD  
card). The navigation device can use navigation maps from both  
memories.  
Note: When you connect the NAVIGON 13xx | 23xx to your computer  
using a USB cable, the internal memory is detected as the 'NAVIGON'  
drive. The slot for the memory card is detected as the 'NAVIGON SD'  
drive.  
Note: Data backups, software updates and navigation map updates can  
be carried out quickly and conveniently with the NAVIGON Fresh  
software, which you can download free of charge from the website  
2.4.4  
Connecting the navigation device to a PC  
When you connect the NAVIGON 13xx | 23xx to your computer for the  
first time, the operating system will try to install a driver for the device.  
You must stop this happening. Make all settings as shown in the  
following illustrations. The NAVIGON 13xx | 23xx will then be detected  
as drive 'NAVIGON'.  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 12 -  
       
User’s manual NAVIGON 13xx | 23xx  
Windows XP  
1. Tap on Next >.  
2. Tap on Finish.  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 13 -  
User’s manual NAVIGON 13xx | 23xx  
Windows Vista  
Tap on Cancel.  
Windows 2000  
1. Tap on Next >.  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 14 -  
User’s manual NAVIGON 13xx | 23xx  
2. Tap on Next >.  
3. Tap on Next >.  
Before you begin  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 15 -  
User’s manual NAVIGON 13xx | 23xx  
4. Tap on Finish.  
2.5  
Navigating with GPS  
GPS is based on a total of at least 24 satellites orbiting the Earth and  
continuously transmitting signals of their position and time. The GPS  
receiver receives this data and calculates its own geographical position  
on the basis of the information transmitted by the various satellites.  
Data from at least three satellites is required for positioning with an  
acceptable degree of accuracy. With data from four or more satellites it  
is possible in addition to determine the position's altitude above sea  
level. Positioning is accurate to within three metres.  
Once the navigation device has determined your position, this position  
can be used as a starting point for calculating a route.  
The map data on your navigation device includes the geographical  
coordinates of all digitally recorded points of interest, streets and  
places. This enables the device to calculate a route between a starting  
point and a destination.  
Calculation of the current position and its representation on the map  
take place approximately once every second. In other words, your  
current position is always shown on the map.  
3
Switching on the NAVIGON 13xx | 23xx  
Press the  
(On/Off) key for approx. 2 seconds.  
The NAVIGATION window opens.  
Switching on the NAVIGON 13xx | 23xx  
- 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
Caution! Do not press the  
(On/Off) key for longer than 2 seconds! If  
you press the key for longer than 10 seconds, a hardware reset will be  
carried out.  
After a hardware reset you must re-calibrate the touchscreen. The GPS  
receiver will also be re-initialised, which can take up to 20 minutes.  
Note: When you switch on the NAVIGON 13xx | 23xx for the first time,  
you will be asked to make the following settings:  
your preferred language for using for the software  
the unit of length for distances  
the time format  
Switching the navigation device to standby mode  
When you switch the navigation device to standby mode, the next time  
it is switched on it will open with the window which was active when  
switched off. In standby mode the device still consumes a small amount  
of energy however.  
Press briefly (max. 2 seconds) on the  
-or-  
(On/Off) key.  
Tap in the NAVIGATION window of the navigation software on the  
button.  
Automatic Standby  
You can configure the NAVIGON 13xx | 23xx so that the navigation  
device is automatically switched to standby mode.  
In the NAVIGATION window tap on Options > Settings > General >  
Automatic Standby.  
Select after how much time you want the navigation device to be  
switched to standby mode (Never, After 10 mins, After 20 mins,  
After 30 mins).  
Select Power Loss in order to switch the device to standby mode  
when the external power supply is interrupted.  
Switching off the navigation device  
When you switch off the navigation device, the next time it is switched  
on it will carry out a restart of the navigation software. Your settings and  
your saved destinations and routes will be retained.  
Press for at least 6 seconds on the  
(On/Off) key.  
Switching on the NAVIGON 13xx | 23xx  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 17 -  
User’s manual NAVIGON 13xx | 23xx  
3.1  
Options  
Some windows offer options that lead to more functions.  
A description of all available options can be found in the chapter  
4
Operating the NAVIGON 13xx | 23xx  
4.1  
Information  
Various information symbols are located at the top of many windows.  
GPS  
The GPS symbol can indicate the following GPS reception states:  
No GPS (No symbol): The built-in GPS receiver is not operational.  
Contact customer service if the problem persists.  
No Signal: Data is being received from less than three satellites.  
Position cannot be calculated.  
GPS Ready: Data is being received from at least three satellites.  
Position can be calculated.  
For details of the GPS status refer to chapter "GPS Status, saving the  
Compass  
The Compass symbol indicates in which direction you are currently  
heading. It can indicate the following points of the compass: N, NE, E,  
SE, S, SW, W, NW.  
TMC (Traffic Information) (only NAVIGON 23xx)  
The NAVIGON 23xx has an integrated TMC receiver which provides  
the navigation system with traffic information updates. If necessary it  
can change your route dynamically, for example in order to avoid a  
traffic jam.  
Note: This function is only available if TMC traffic messages are being  
transmitted in the country in which you are travelling. This is not the  
case in all countries.  
Operating the NAVIGON 13xx | 23xx  
- 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
User’s manual NAVIGON 13xx | 23xx  
The TMC symbol can display the following TMC reception status:  
Tuning (in red): The TMC receiver is operational but cannot find a  
transmitter that is sending TCM signals. There are no active traffic  
messages.  
Tuning: The TMC receiver is operational but cannot find a station that  
is transmitting TMC signals. Traffic messages are active however. This  
can be the case, for example, when travelling through a tunnel.  
TMC on Standby (in grey): Traffic messages can be receiverd.  
Note: The TMC antenna is integrated in the car charger cable. The  
Tuning symbol may still appear therefore when the car charger cable is  
not connected to the NAVIGON 23xx.  
For details of the TMC function refer to chapter "TMC (Traffic  
Energy  
The Energy symbol can indicate the following states of the integrated  
battery:  
The device is being supplied by an external power source. The battery  
is fully charged.  
- or -  
The battery cannot be charged because its temperature is too high or  
too low.  
The device is being supplied by an external power source. The battery  
is being charged.  
The device is being supplied by its internal battery. The battery charge  
is sufficient.  
The device is being supplied by its internal battery. The battery charge  
is low.  
Muting  
The Muting symbol can indicate the following states:  
No symbol: The navigation application is not muted.  
Muting: The navigation application is muted. If the device is navigating  
at the moment, you will not hear any driving instructions.  
Operating the NAVIGON 13xx | 23xx  
- 19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User’s manual NAVIGON 13xx | 23xx  
4.2  
Software keyboard  
A software keyboard appears on the screen when text entries are  
necessary.  
All entries can be made on the software keyboard using your fingertips.  
Only capital letters can be entered.  
When entering town or street names you need not enter any special  
characters or umlauts. The navigation system fills in these characters  
for you automatically. For example, if you are looking for the town of  
"Bärnau", then simply type in the word "BARNAU". Special characters  
may be helpful however when naming saved destinations and routes.  
4.2.1  
Special keys  
inserts a space.  
deletes the character in front of the cursor.  
opens the keyboard with numerals.  
Latin, Cyrillic and Greek alphabet  
opens the keyboard with the Latin alphabet.  
opens the keyboard with the Cyrillic alphabet.  
opens the keyboard with the Greek alphabet.  
When you want to enter addresses, names or POIs, the keyboard with  
the alphabet for the country in question will open automatically.  
When you want to save a destination to Favourites or when you enter a  
POI category or a country, the keyboard with the alphabet of the user  
interface will open automatically.  
You can also switch from the Cyrillic or Greek keyboard to the Latin  
keyboard. Many addresses can then also be entered as transliterations  
or in the language of the user interface.  
Example: The language of the user interface is English. You want to  
navigate to Moscow. You have the following options:  
"Москва" (Cyrillic)  
"Moskva" (transliterated)  
"Moscow" (English)  
Operating the NAVIGON 13xx | 23xx  
- 20 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
Note: Street names and place names can be entered only in the  
language of the user interface if that is how they exist in the map's  
database.  
Note: The maximum number of keyboards is always 2.  
Umlauts, accents and other letters  
Another keyboard with special characters is available for each alphabet.  
opens the keyboard with Latin special characters.  
opens the keyboard with Cyrillic special characters.  
opens the keyboard with Greek special characters.  
As soon as you have entered a special character the letter keyboard  
reappears.  
4.2.2  
Entering data  
Often you can select an entry from a list. This is the case, for example,  
when you enter a location.  
As soon as you enter the first letter, the largest city in the given country  
that begins with this letter appears.  
Enter more letters and after each entry the first city which begins with  
these letters will appear.  
When the correct location appears, tap on  
complete the entry.  
(OK) in order to  
You can open at any time a list containing all the locations which begin  
with the letters or include the text already entered. The more letters you  
enter, the shorter the list becomes.  
Tap on  
(Open List) to call up this list.  
(Up) button and the  
You can use the  
through the list.  
(Down) button to move  
Tap on an entry in the list to select it and transfer it to the input box.  
The list closes once an entry has been selected. You are now finished  
with entering the city.  
Tap on  
(Close List) in order to close the list without selecting  
an entry.  
Operating the NAVIGON 13xx | 23xx  
- 21 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User’s manual NAVIGON 13xx | 23xx  
Note: The list opens automatically as soon as it contains only 5 or less  
entries.  
4.3  
4.4  
Options  
Some windows offer options that lead to more functions.  
A description of all available options can be found in the chapter  
Menus  
Some buttons have menus which open when activated.  
Tap on a menu point to execute its function.  
If you would like to quit the options list without selecting a function, tap  
on the button you used to open the menu.  
5
Navigation  
Use the navigation system at your own risk.  
Caution! Be sure to refer to all the safety information in chapter  
Impaired GPS reception  
If GPS reception is impaired, navigation will be interrupted. As soon as  
GPS reception is restored, the navigation system calculates any change  
of position which has occurred in the meantime. You can then simply  
continue navigating.  
Arriving at your destination  
When you have reached your selected destination, a message to this  
effect will be displayed.  
Only your current position (orange arrow) will now be shown on the  
map.  
5.1  
Starting the navigation application  
You have switched on the navigation device.  
The following message appears:  
"Please note that the road traffic regulations are prior to the instructions  
of the navigation system. Please do not operate the device while  
driving."  
Navigation  
- 22 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
User’s manual NAVIGON 13xx | 23xx  
After you have read and fully understood the message, tap on OK.  
If you do not accept the content of the message, tap on Cancel in  
order to switch the navigation device off again.  
The NAVIGATION window is opened. From here you can access all the  
functions of the navigation application.  
Initialising the GPS receiver  
Note: Good reception of GPS data requires an unobstructed path from  
the GPS receiver to the satellites. Tunnels, narrow thoroughfares  
between buildings and reflecting house fronts can restrict GPS  
reception greatly or make it impossible. If the GPS receiver or the  
navigation device is inside a vehicle, a metallised windscreen or a  
windscreen heater can be the cause of poor GPS reception.  
As soon as the navigation device has been switched on, initialisation of  
the GPS receiver will begin.  
The integrated GPS receiver is not initialised for the first time until the  
navigation application is started for the first time. It can take up to  
20 minutes to initialise the GPS receiver for the first time.  
Note: If the GPS symbol indicates GPS Ready after far less than  
20 minutes, it is advisable to leave the navigation device switched on  
for at least another 15 minutes in order to ensure reliable operation of  
the receiver.  
Each time you switch on the navigation device after this, GPS reception  
will start within a short time.  
If the navigation device has not been switched on for more than a week,  
it can take up to 10 minutes to re-initialise the receiver.  
In the top right hand corner of the display, you will see the GPS symbol.  
As soon as data from at least three satellites is received, the icon will  
change to  
(GPS Ready).  
Note: Initialisation takes the least time if you do not start driving until  
the initialisation has finished.  
For more details about the GPS symbol refer to chapter "GPS" on  
page 18.  
Returning to the Navigation window  
The NAVIGATION window opens when the navigation application is  
started.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 23 -  
 
User’s manual NAVIGON 13xx | 23xx  
If another window of the navigation application is open, tap on  
(Back). This will return you to the window you came from.  
Tap on  
(Back) repeatedly until the NAVIGATION window is  
opened.  
5.2  
Specifying a destination  
Under New Destination you can enter destinations to which you have  
not yet navigated or which you have not saved.  
Here you can enter the destination's address or coordinates, select a  
POI, or select a destination with the Direct Access function.  
Note: The first time that you want to enter a new destination you will be  
asked to select the country in which your destination is situated.  
Under My Destinations the NAVIGON 13xx | 23xx provides the  
following lists of destinations and addresses for you to select from:  
FAVOURITES: All destinations that you have entered in the  
NAVIGON 13xx | 23xx and then saved.  
LAST DESTINATIONS: Destinations to which you have navigated on a  
previous occasion.  
IMPORTED ADDRESSES: All destinations that you have imported from  
Microsoft Outlook or from other data sources.  
5.2.1  
Specifying the country in which the destination is situated  
At top left in the ADDRESS, POI IN A CITY and POI NATIONWIDE windows  
you will find the Country button. It bears the flag of the country in which  
you can currently select destinations for the navigation application.  
If your destination is in a different country, then proceed as follows:  
1. Tap the Country button.  
2. Enter the name of the country in which your destination is situated.  
The button shows the flag of the destination country.  
Note: The selection list contains only those countries whose maps are  
available to the navigation device.  
5.2.2  
Entering a destination address  
1. Tap in the NAVIGATION window on New Destination > Enter an  
Address.  
Navigation  
- 24 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
User’s manual NAVIGON 13xx | 23xx  
If you want to enter an address in a country in which normally the  
street comes first (e.g. Sweden, Norway,…), then the Street First  
menu will open.  
1a TippenSelect whether you would like to enter the street first and  
then the location (Street First), or first the location and then the  
street (City First).  
Note: The following description is based on City First as the order for  
entering the address.  
If you don't want to choose each time the order for entering the address  
information, you can select a default setting under Options > Settings >  
General > Input Mode for Address Data. Please note however that the  
Street First order of entry is not possible for all countries. In this case  
you must enter the location first.  
The ADDRESS window opens.  
2. Enter the name or the postal code of the destination town.  
3. Enter the name of the destination street.  
4. Enter the house number. If you do not know the house number,  
then leave this box empty.  
If you don't know the house number but know the name of a nearby  
side street, then tap on the Cross Street box and enter the name of  
this street. The navigation system will calculate a route to the  
intersection of the streets you have entered.  
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.  
Indicated on the Activate MyRoutes button is whether several route  
suggestions are to be calculated (Yes) or not (No).  
Tap on Activate MyRoutes in order to change the setting.  
5. Tap on Navigation in order to navigate to the stipulated address  
- or -  
Tap on Parking in order to search for a car park near your  
destination.  
Sometimes the destination cannot be found exactly because, for  
example, the entered combination of place and street name exists  
several times.  
In this case a window will open with a list of all the addresses  
matching your entry plus additional information.  
Tap on the address to which you want to navigate.  
If the entered house number is not included on the map, the window  
will show an address with the house number closest to the one  
entered.  
The map opens in Preview mode. The destination is indicated on the  
map.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 25 -  
 
User’s manual NAVIGON 13xx | 23xx  
For detailed information on how to start navigation, please refer to  
Note: It is not necessary to enter all the address details. You can tap on  
Navigation before you get that far.  
If you specify the town only, the navigation system will calculate a route  
to the town centre.  
If you specify only the town and street without specifying a house  
number or cross street, the navigation system will calculate the best  
route to this street.  
5.2.3  
Enter Coordinates  
You can also enter the geographic coordinates of your destination. The  
coordinates can be entered as decimal degrees or in degrees, minutes  
and seconds.  
1. Tap in the NAVIGATION window on New Destination > Enter an  
Address.  
The ADDRESS window opens.  
2. Tap in the ADDRESS window on Options > Enter Coordinates.  
The ENTER COORDINATES window opens.  
Entering as a decimal number  
3. Enter the degree of latitude.  
Begin the entry with a minus sign if you want to enter a southern  
degree of latitude.  
4. Enter the degree of longitude.  
Begin the entry with a minus sign if you want to enter a western  
degree of longitude.  
Entering with minutes / seconds  
3. Enter the degree of latitude.  
Use the corresponding buttons shown on the keyboard in order to  
enter the units:  
(degrees),  
(minutes),  
(seconds).  
The (N S) button alongside the entry box indicates whether it is a  
northern or southern degree of latitude.  
Tap on the button if you want to change the current setting.  
4. Enter the degree of longitude.  
Use the corresponding buttons shown on the keyboard in order to  
enter the units:  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 26 -  
   
User’s manual NAVIGON 13xx | 23xx  
(degrees),  
(minutes),  
(seconds).  
The (E W) button alongside the entry box indicates whether it is an  
eastern or western degree of longitude.  
Tap on the button if you want to change the current setting.  
5.2.4  
Points of interest  
Points of Interest, also called POI (Points Of Interest) for short, are  
useful addresses that are catalogued according to particular criteria.  
POIs include ports, airports, restaurants, hotels, petrol stations, public  
buildings, doctor's surgeries, hospitals, shopping centres, etc.  
Points of interest can be displayed on the map by means of a symbol.  
In the NAVIGATION window tap on Options > Settings > Map Display >  
Categories Shown in order to select the categories you want to appear  
on the map.  
POI nearby  
POIs nearby are POIs located within a certain radius of your current  
location. This means you can always find the nearest petrol station for  
example, no matter where you are.  
Note: GPS reception must be good enough for determining your  
position. Check the  
(GPS Ready) symbol to see whether GPS  
reception is good enough.  
For more details refer to the chapter "Initialising the GPS receiver" on  
page 23.  
Note: The Direct Access section offers 3 categories of POI from the  
current vicinity which can be searched for quickly and without additional  
entry.  
For more details refer to the chapter "Direct access to POI" on page 30.  
1. Tap in the NAVIGATION window on New Destination > Search for  
POI > Nearby.  
The POI NEARBY window opens.  
2. Select a category from which you would like to find a POI.  
Categories in which no destinations are available nearby cannot be  
selected.  
If sub-categories exist for the category you have selected, the Sub  
Category list opens.  
3. Select the sub-category from which you would like to select a POI.  
The Destination list opens. It contains the nearest POI in the  
specified category, sorted by distance.  
Navigation  
- 27 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
4. If the list is very long:  
Tap on  
The keyboard appears.  
Enter a number of letters from the destination.  
(Close List).  
Tap on  
(Open List).  
The list now contains only those destinations which begin with or  
contain the letters entered.  
5. Tap on the name of the destination.  
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.  
Indicated on the Activate MyRoutes button is whether several route  
suggestions are to be calculated (Yes) or not (No).  
Tap on Activate MyRoutes in order to change the setting.  
6. Tap on Navigation.  
- or -  
Tap on Parking in order to search for a car park near your  
destination.  
The map opens in Preview mode. The destination is indicated on  
the map.  
For detailed information on how to start navigation, please refer to  
POI of nationwide significance  
POIs of nationwide significance are airports, sights, national  
monuments, large ports etc. This way you can find well-known places of  
interest even if you don't know the name of their location.  
1. In the NAVIGATION window tap on New Destination > Search for  
POI > Nationwide.  
The POI NATIONWIDE window opens.  
2. Select a category from which you would like to find a POI.  
The Destination list opens. It contains the POI from the selected  
category, sorted alphabetically.  
3. If the list is very long:  
Tap on  
(Close List).  
The keyboard appears.  
Enter a number of letters from the destination.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 28 -  
User’s manual NAVIGON 13xx | 23xx  
Tap on  
(Open List).  
The list now contains only those destinations which begin with or  
contain the letters entered.  
4. Tap on the name of the destination.  
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.  
Indicated on the Activate MyRoutes button is whether several route  
suggestions are to be calculated (Yes) or not (No).  
Tap on Activate MyRoutes in order to change the setting.  
5. Tap on Navigation.  
- or -  
Tap on Parking in order to search for a car park near your  
destination.  
The map opens in Preview mode. The destination is indicated on  
the map.  
For detailed information on how to start navigation, please refer to  
POI in a particular location  
POIs in a particular location can be useful when navigating in an  
unfamiliar town.  
1. In the NAVIGATION window tap on New Destination > Search for  
POI > in a City.  
The POI IN A CITY window opens.  
2. Enter the name or the postal code of the destination town.  
3. Select a category from which you would like to find a POI.  
Categories in which no destinations are available in the selected  
town cannot be entered.  
If sub-categories exist for the category you have selected, the Sub  
Category list opens.  
4. Select the sub-category from which you would like to select a POI.  
The Destination list opens. It contains POI from the specified  
category, sorted alphabetically.  
5. If the list is very long:  
Tap on  
(Close List).  
The keyboard appears.  
Enter a number of letters from the destination.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 29 -  
User’s manual NAVIGON 13xx | 23xx  
Tap on  
(Open List).  
The list now contains only those destinations which begin with or  
contain the letters entered.  
6. Tap on the name of the destination.  
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.  
Indicated on the Activate MyRoutes button is whether several route  
suggestions are to be calculated (Yes) or not (No).  
Tap on Activate MyRoutes in order to change the setting.  
Sometimes the destination cannot be found exactly because, for  
example, several restaurants with the same name exist in the town  
in question.  
In this case a window opens with all the destinations matching your  
entry plus additional information.  
Tap on the destination to which you want to navigate.  
7. Tap on Navigation.  
- or -  
Tap on Parking in order to search for a car park near your  
destination.  
The map opens in Preview mode. The destination is indicated on  
the map.  
For detailed information on how to start navigation, please refer to  
Direct access to POI  
The direct access area contains 3 categories of POI. Destinations in  
your vicinity that correspond to one of these categories can be viewed  
here quickly and without further entry.  
In the NAVIGATION window tap on Options > Settings > General in  
order to select which categories or sub-categories are to be  
available for direct access.  
Note: The categories for the Direct Access function are the same as  
those available for the POI on Your Route function. (Refer to "Map  
Note: GPS reception must be good enough for determining your  
position. Check the  
(GPS Ready) symbol to see whether GPS  
reception is good enough.  
For more details refer to the chapter "Initialising the GPS receiver" on  
page 23.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 30 -  
 
User’s manual NAVIGON 13xx | 23xx  
1. In the New Destination window tap on NAVIGATION.  
The NEW DESTINATION menu opens.  
In the Direct Access area you are shown the symbols of those POI  
categories that are available by direct access.  
2. Tap on the category from which you would like to select a POI.  
A list opens. It contains the nearest POIs in the specified category,  
sorted by distance.  
3. Tap on the name of the destination in order to start navigation to it.  
The map opens in Preview mode. The destination is indicated on  
the map.  
For detailed information on how to start navigation, please refer to  
5.2.5  
Information about the destination  
For many destinations that you specify, there will be further information  
available, stored in the navigation system's database.  
There is, for example, a telephone number available for many  
restaurants. You can then call the restaurant to reserve a table, for  
example.  
One of the destination entry windows described above is open.  
Tap on Options > Info.  
The DESTINATION INFO window opens. It contains all the information  
about the specified destination that is stored in the navigation system's  
database.  
Tap on Cancel in order to close the DESTINATION INFO window  
again.  
Tap on  
map.  
(Show on Map) in order to see the destination on the  
5.2.6  
Favourites  
Destinations to which you want to travel often can be saved in the  
FAVOURITES list.  
In the FAVOURITES list you can save up to 500 destinations.  
Information on how to save a destination can be found in chapter  
1. Tap in the NAVIGATION window on My Destinations > Favourites.  
2. Tap on the destination to which you want to navigate.  
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.  
Navigation  
- 31 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
Indicated on the Activate MyRoutes button is whether several route  
suggestions are to be calculated (Yes) or not (No).  
Tap on Activate MyRoutes in order to change the setting.  
3. Tap on Navigation.  
- or -  
Tap on Parking in order to search for a car park near your  
destination.  
The map opens in Preview mode. The destination is indicated on  
the map.  
For detailed information on how to start navigation, please refer to  
Note: Favourites are indicated on the map by a small flag with their  
name.  
5.2.7  
Last Destinations  
NAVIGON 13xx | 23xx saves the last 12 destinations to which you  
have navigated in the LAST DESTINATIONS list.  
1. Tap in the NAVIGATION window on My Destinations > Last  
Destinations.  
2. Tap on the destination to which you want to navigate.  
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.  
Indicated on the Activate MyRoutes button is whether several route  
suggestions are to be calculated (Yes) or not (No).  
Tap on Activate MyRoutes in order to change the setting.  
3. Tap on Navigation.  
- or -  
Tap on Parking in order to search for a car park near your  
destination.  
The map opens in Preview mode. The destination is indicated on  
the map.  
For detailed information on how to start navigation, please refer to  
5.2.8  
Imported Addresses  
You can use the NAVIGON Sync software to export to your navigation  
system the contact addresses which you have saved in Microsoft  
Outlook on your computer.  
Navigation  
- 32 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
From many route planners on the Internet it is also possible to copy the  
entered destination address directly onto your navigation system. This  
function is clearly indicated on those websites which offer it.  
Note: NAVIGON Sync can be downloaded free of charge from  
Contacts which have been saved with several addresses will appear  
once with each address in the IMPORTED ADDRESSES list.  
1. In the NAVIGATION window, tap on My Destinations > Imported  
Addresses.  
2. Tap on the address to which you want to navigate.  
The DETAILED INFORMATION ABOUT THE DESTINATION window opens.  
Indicated on the Activate MyRoutes button is whether several route  
suggestions are to be calculated (Yes) or not (No).  
Tap on Activate MyRoutes in order to change the setting.  
3. Tap on Navigation.  
- or -  
Tap on Parking in order to search for a car park near your  
destination.  
The map opens in Preview mode. The destination is indicated on  
the map.  
For detailed information on how to start navigation, please refer to  
5.2.9  
Navigating home  
In NAVIGON 13xx | 23xx you can save an address as your home  
address. You can navigate to your home address at any time by  
pressing a single button.  
More information about entering your home address can be found in the  
In the Take Me Home window tap on NAVIGATION.  
If you have not yet entered your home address, a dialog box will  
notify you of this.  
Navigation starts. The route profile used for the previous navigation  
will be applied.  
5.2.10  
Selecting destinations on the map  
You may select a destination directly on the map. This is a quick way to  
select towns, streets and POI.  
Navigation  
- 33 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
1. In the NAVIGATION window tap on Show Map.  
2. Tap on (Destination search)  
The map opens in Destination search mode.  
3. Tap on the point to which you want to navigate.  
Note: For details of how to change the map view so that your destination  
is easily seen refer to the chapter "Map in Destination search mode" on  
page 50.  
The destination that you have selected appears under the cross  
hairs.  
The geographical coordinates of the destination and the  
corresponding address are shown in the bottom third of the screen.  
4. Tap on  
(OK).  
The DESTINATION ON MAP window opens. The detailed address data  
of the selected destination is displayed in the upper left-hand  
corner.  
5. Tap on Take Me There.  
The map opens in Preview mode. The destination is indicated on  
the map.  
For detailed information on how to start navigation, please refer to  
5.2.11  
Route preview  
The map is open in Preview mode.  
The navigation destination is depicted by a small flag.  
For detailed information refer to the chapter "Map in Preview mode" on  
page 45.  
Route Profile  
The route is calculated on the basis of a route profile. The current  
settings are indicated by symbols on the  
(Route  
Profile) button at the top right edge of the map.  
If you now want to view or change the route profile, tap on Route  
Profile.  
Navigation  
- 34 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User’s manual NAVIGON 13xx | 23xx  
Note: If you change the route profile, the changes will also apply to  
future navigations.  
Information about individual route profile settings can be obtained by  
tapping on the related  
(Help) button.  
Turn-by-Turn List  
If you want to see detailed directions for the route, tap on Options >  
Turn-by-Turn List.  
For details of the functions in the TURN-BY-TURN LIST window refer to  
MyRoutes  
When the MyRoutes function is activated, the navigation system  
calculates up to three routes on the basis of the currently selected route  
profile and shows them on the map in different colours (orange, green,  
blue) and with a number. For each route there is a button with the same  
number and a symbol in the same colour.  
When calculating the time of arrival or the trip time, the navigation  
system takes account of additional factors such as day of the week and  
time of day.  
The route which corresponds best to the selected route profile is  
marked with "MyRoute".  
Note: Even when the MyRoutes function is activated, sometimes only  
one additional route or no additional routes at all can be calculated for a  
particular route. No further suggestion is then shown on the button in  
question.  
Navigation  
Tap on the button of the route which you want to use for the  
navigation.  
No GPS reception  
If GPS signal reception is not good enough, the following message will  
appear: "GPS reception is currently not sufficient. Navigation starts  
automatically as soon as GPS reception is OK again."  
You have the following options:  
Wait. As soon as GPS reception is good enough for determining  
your position, the route will be recalculated and navigation will  
begin.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 35 -  
 
User’s manual NAVIGON 13xx | 23xx  
Tap on Cancel. The window in which you entered your destination  
will open again. Your destination is saved in the LAST DESTINATIONS  
list.  
Tap on Demo. The route will be calculated using the centre of the  
destination location as starting point. Navigation will then be  
simulated on this route.  
Tap on  
(Back) in order to terminate the demonstration.  
Note: If you selected the destination on the map, then the Demo button  
is not available.  
5.3  
Managing destinations  
Every destination you enter and destinations from the LAST  
DESTINATIONS and IMPORTED ADDRESSES lists can be saved in the  
FAVOURITES list. This makes sense if you frequently navigate to a  
particular destination.  
Note: Favourites are indicated on the map by a small flag with their  
name.  
5.3.1  
Saving destinations  
1. Enter a destination (refer to "Entering a destination address " on  
page 24 or "Points of interest" on page 27). Do not tap on the  
Navigation button!  
2. Tap on Options > Save Destination.  
- or -  
1. Select a destination from the LAST DESTINATIONS list or from the  
IMPORTED ADDRESSES list. (Refer to "Last Destinations" on page 32  
or "Imported Addresses" on page 32). Do not tap on the Navigation  
button!  
2. Tap on Options > Save as Favourite.  
3. Enter a name for the destination.  
4. Tap on Save.  
5.3.2  
Defining the home address  
You can always start navigation to your home address very quickly by  
tapping in the NAVIGATION window on Take Me Home.  
You can define exactly one destination as your home address. This  
destination is saved in the FAVOURITES list.  
Proceed as follows:  
Navigation  
- 36 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
User’s manual NAVIGON 13xx | 23xx  
1. Tap in the NAVIGATION window on New Destination > Enter an  
Address.  
The ADDRESS window opens.  
2. Enter your home address.  
3. Tap on Options > Save Destination.  
4. Enter a name for the address. (For example "Home Address".)  
Your home address is now saved in the FAVOURITES list.  
5. Tap on  
(Back).  
The NAVIGATION window opens.  
6. Tap on My Destinations > Favourites.  
7. Select from the FAVOURITES list the destination which you want to  
define as your new home address. (Refer also to Favourites on  
page 31)  
8. Tap on Options > Home Address.  
The selected destination has now been saved as your home address.  
Your home address now appears in the FAVOURITES list marked by a  
house symbol.  
Note: The home address is also indicated on the map by a house  
symbol.  
Changing the home address  
You can define a different address as the home address at any time.  
Proceed as described above.  
5.4  
Multi-leg routes  
It is possible to plan routes without GPS reception, for example in the  
comfort of your home. Planned routes can be saved for later use. This  
allows you to plan as many routes as you like, for example for your  
holidays.  
1. In the NAVIGATION window tap on Options.  
The options list opens.  
2. Tap on the Route Planning option.  
The ROUTE PLANNING window opens.  
5.4.1  
Entering the starting point  
The starting point of a route is the point at which you want to begin your  
trip. This is not necessarily the current location. If you are planning a  
route for your holidays at home, you could, for example, enter your  
hotel as the starting point.  
Navigation  
- 37 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
The starting point is only important if you want to see a planned route  
on the map but currently have no GPS reception, or if you are not  
currently at the planned starting point. This is why your selected starting  
point has the flow number "0".  
As soon as you start navigation, your current location will be used as  
the starting point for the route calculation.  
The first leg of the route is therefore the journey to the route point with  
flow number "1".  
1. Tap on the Specify Starting Point box.  
The STARTING POINT menu opens.  
If you want to enter your current location as the starting point:  
2. Tap on the Current Position menu item.  
If you want to enter a different starting point:  
2. Tap on the corresponding button.  
3. Enter the starting point. (Refer to the corresponding section of  
chapter "Specifying a destination" on page 24 ff.)  
4. Tap on Starting Point.  
The selected starting point will now be displayed next to the 0  
button (Starting Point).  
Changing the starting point  
Tap on the starting point (button 0).  
The STARTING POINT menu opens. You can now enter a different  
starting point. Proceed as described above.  
5.4.2  
Entering route points  
The route points of a route are the destinations that you want to  
navigate to.  
The flow number for each route point is indicated on a button in front of  
it.  
1. Tap on the Add Route Point box.  
The ROUTE POINT menu opens.  
2. Tap on the button for how you want to enter the destination.  
3. Enter the route point. (Refer to the corresponding section of chapter  
4. Tap on Add.  
The selected route point is now shown next to its flow number.  
Repeat these steps for each destination that you want to add to your  
route.  
Navigation  
- 38 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User’s manual NAVIGON 13xx | 23xx  
5.4.3  
Editing route points  
Route points can be deleted from a route. The order of the route points  
can be changed as you wish.  
Note: The starting point (flow number "0") can be neither moved nor  
deleted. However you can make another route point into the starting  
point.  
Tap on the route point that you want to edit.  
The context menu contains the following buttons:  
Route Point Up: Moves the selected route point further to the front.  
(Example: route point 2 becomes route point 1).  
Route Point Down: Moves the selected route point further to the  
back. (Example: route point 2 becomes route point 3).  
Delete: Deletes the selected route point. A dialog window prompts  
you to confirm deletion.  
5.4.4  
Managing routes  
You can save each planned route under a particular name.  
Note: Only the start point and route points will be saved, not the  
calculated route. When you load a saved route, it must be recalculated  
before navigation can start.  
You can load, rename or delete stored routes.  
Saving routes  
The ROUTE PLANNING window is open. You have entered the starting  
point and at least one route point.  
1. Tap on Options > Save Route.  
2. Enter a name for the route.  
3. Tap on Save.  
The destination is now saved to the SAVED ROUTES list. The dialog  
window closes.  
Loading routes  
1. Tap on Options > Saved Routes.  
2. Tap on the route that you want to load.  
3. Tap on Load Route.  
Navigation  
- 39 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
User’s manual NAVIGON 13xx | 23xx  
The ROUTE PLANNING window opens. The starting point and the  
route points of the loaded route have been entered.  
5.4.5  
Calculating and displaying routes  
It is possible to calculate and display a planned route on the map even  
without GPS reception in order to get an impression of the journey.  
The ROUTE PLANNING window is open. The starting point and at least  
one route point have been entered.  
Tap on Show Route.  
The map opens in Preview mode.  
The starting point and the route points are marked by flags. The  
distance and the estimated trip time is given for each leg of the  
route.  
5.4.6  
Simulating routes  
It is also possible simply to simulate navigation on a planned route.  
Note: GPS reception is not necessary for simulation.  
If you have planned a multi-leg route, only the first leg will be simulated.  
You have calculated and displayed a route.  
1. Tap on Options > Simulation.  
The route will be recalculated for simulation purposes.  
If you have planned a route with only one route point and the  
MyRoutes function is activated, you will be prompted to select a  
route for the simulation.  
2. Tap on the button of the route on which you want to simulate the  
navigation.  
Note: When the MyRoutes function is deactivated or if you have  
planned a route with more than one route point, the simulation will start  
directly after the route has been calculated.  
For more details about the MyRoutes function refer to the chapter  
"MyRoutes" on page 35.  
Stopping simulation  
You can stop simulation at any time.  
Tap on (Back).  
Navigation  
- 40 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
The ROUTE PLANNING window opens.  
5.4.7  
Route preview  
You have calculated and displayed a route. The map is open in  
Preview mode.  
Route Profile  
The route is calculated on the basis of a route profile. The current  
settings are indicated by symbols on the  
(Route  
Profile) button at the top right edge of the map.  
If you now want to view or change the route profile, tap on Route  
Profile.  
Note: If you change the route profile, the changes will also apply to  
future navigations.  
Information about individual route profile settings can be obtained by  
tapping on the related  
(Help) button.  
Note: When you load routes which originate from a different provider  
than NAVIGON, the Route Profile button may be inactive. You cannot  
change the route profile of this route.  
Turn-by-Turn List  
If you want to see detailed directions for the route, tap on Options >  
Turn-by-Turn List.  
For details of the functions in the TURN-BY-TURN LIST window refer to  
MyRoutes  
When the MyRoutes function is activated, the navigation system  
calculates up to three routes on the basis of the currently selected route  
profile and shows them on the map in different colours (orange, green,  
blue) and with a number. For each route there is a button with the same  
number and a symbol in the same colour.  
When calculating the time of arrival or the trip time, the navigation  
system takes account of additional factors such as day of the week and  
time of day.  
The route which corresponds best to the selected route profile is  
marked with "MyRoute".  
Navigation  
- 41 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User’s manual NAVIGON 13xx | 23xx  
Note: The MyRoutes function can be used only for routes with only one  
route point. For routes with two or more route points only one route is  
calculated and displayed, regardless of whether you have activated the  
function or not.  
Note: Even when the MyRoutes function is activated, sometimes only  
one additional route or no additional routes at all can be calculated for a  
particular route. No further suggestion is then shown on the button in  
question.  
Navigation  
Tap on the button of the route which you want to use for the  
navigation.  
No GPS reception  
If GPS signal reception is not good enough, the following message will  
appear: "GPS reception is currently not sufficient. Navigation starts  
automatically as soon as GPS reception is OK again."  
You have the following options:  
Wait. As soon as GPS reception is good enough for determining  
your position, the route will be recalculated and navigation will  
begin.  
Tap on Cancel. The map opens in Preview mode.  
5.5  
Options  
Some windows offer options that lead to more functions.  
Tap on Options to open the options list.  
Tap on the option you would like to use.  
If you would like to quit the options list without selecting an option,  
tap on the Options button again.  
2D/3D: Changes between 2D and 3D mode. The symbol indicates the current  
mode.  
Add to Route: Opens the route planning. The address specified will be added as  
a route point. (Refer to "Multi-leg routes" on page 37.)  
Block: Opens a window in which you can block a section of the route lying  
ahead in order to calculate a route which avoids this section, e.g. if you  
have heard on the radio of a traffic jam relating to this section. (Refer to  
Day/Night: Changes between "Day" and "Night" display modes. The symbol  
indicates the current mode.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 42 -  
   
User’s manual NAVIGON 13xx | 23xx  
Delete All: Deletes all destinations in the list (LAST DESTINATIONS list or  
FAVOURITES list, depending on where you opened the options). The list  
is then empty. A dialog window prompts you to confirm deletion.  
Delete: Deletes the selected destination from the LAST DESTINATIONS or  
FAVOURITES list or the selected route from the SAVED ROUTES list. A  
dialog window prompts you to confirm deletion.  
Direct Help: Opens a window in which you can find in quick and uncomplicated  
manner the addresses and phone numbers of offices in your direct  
vicinity that can be useful in emergencies. (Refer to "Direct Help" on  
page 53.)  
Enter Coordinates: Opens the ENTER COORDINATES window. Here you can enter  
the geographic coordinates of your destination. (Refer to "Enter  
Factory Settings: Resets all settings to the as-delivered state. Routes and  
saved destinations are deleted. The software is re-started and behaves  
as if started for the first time after being purchased. (Refer to "Switching  
GPS Status: Opens the GPS STATUS window. Here you can see details  
regarding GPS reception. You can also save the data of your current  
page 54)  
Home Address: Saves the selected destination as your home address. You can  
then always start navigation to this destination very quickly by tapping in  
the NAVIGATION window on Take Me Home.  
Interim Destination: Sets the selected point as interim destination. The  
navigation system will first guide you to this interim destination.  
Afterwards you can continue your original navigation.  
MyReport: Opens the MYREPORT window. Here you can notify NAVIGON about  
any changes to traffic monitoring systems and routing.  
MyRoutes: Opens the map in Preview mode. You are provided with up to three  
different suggestions as to how you can continue your journey. Select  
one of the routes offered.  
New Route: Deletes the starting point and all route points from the ROUTE  
PLANNING window so that you can plan a new route.  
If necessary, save the previously planned route!  
Parking: Starts navigation to a car park near the destination.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 43 -  
User’s manual NAVIGON 13xx | 23xx  
POI on Your Route: Opens a list with POIs lying on your route. A destination  
shown here can be selected as an interim destination and can be  
navigated to.  
Product Information: Here you are shown the version numbers and copyright  
details of the hardware and software.  
Rename: Opens a window in which you can change the name for the selected  
destination or route.  
Route Planning: Opens the ROUTE PLANNING window. Here you can plan  
routes, manage planned routes and start navigation on a planned route.  
(Refer to "Multi-leg routes" on page 37)  
Route Profile: Opens the ROUTE PROFILE window. Here you can view the  
options for route planning and, if necessary, change them.  
Save as Favourite: Saves the selected destination to the FAVOURITES list. (Refer  
Save Destination: Saves the selected address in the FAVOURITES list. (Refer to  
Save Position: Opens the SAVE DESTINATION AS... window. Here you can save  
your current position under a certain name in the FAVOURITES list.  
Save Route: Opens a window in which you can save the planned route under a  
specific name. (Refer to "Saving routes" on page 39)  
Saved Routes: Opens a dialog window into which you can load a saved route.  
Settings: Opens the SETTINGS window. Here you can configure the navigation  
Show on Map: Shows the selected address on the map.  
Simulation: Simulates a navigation on the route indicated. This simulation can  
be performed without GPS reception. On multi-leg routes, only the first  
leg is simulated.  
Skip Route Point: Tap this button to omit the next route point. This button is  
active only when at least 2 route points still lie ahead of you. (Refer to  
Touchscreen Calibration: The touchscreen can be re-calibrated if it responds  
poorly to touch. Follow the instructions on the screen.  
Traffic: (Only NAVIGON 23xx) Opens the TRAFFIC INFORMATION window in  
which pending reports are listed. (Refer to "TMC (Traffic Information)"  
on page 56)  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 44 -  
User’s manual NAVIGON 13xx | 23xx  
Turn-by-Turn List: Shows detailed directions for the route, including all points at  
which you must turn. (Refer to "Turn-by-Turn List" on page 55)  
5.6  
Working with the map  
5.6.1  
Selecting the navigation map  
Each country has its own navigation map. Seamless navigation over  
several maps on one continent is possible however if a continuous  
route can be calculated with the maps saved on the device.  
Even if maps of countries in other continents are available on the  
navigation device, the NAVIGON 13xx | 23xx can only ever work with  
the maps of a single continent.  
Tap in the NAVIGATION window on Options > Settings > Map Display in  
order to see which maps are currently in use. Here you can also select  
a different continent if the navigation device contains any maps of  
countries on other continents.  
5.6.2  
Map in Preview mode  
You have entered a destination and tapped on Navigation.  
- or -  
You have planned or loaded a route and tapped on Show Route.  
The map opens in Preview mode.  
1
When the MyRoutes function is activated, up to three numbered routes  
are indicated on the map in different colours (orange, green, blue).  
When the MyRoutes function is deactivated or if you have planned a  
route with more than one route point, only one route is displayed.  
Navigation  
- 45 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
User’s manual NAVIGON 13xx | 23xx  
The current position is indicated (orange arrow).  
2
3
If you display a planned or loaded route and the specified starting point  
is not your current location, then it is possible that your current position  
will not be shown on the preview.  
Symbols on the  
(Route Profile) button indicate the  
current settings in the route profile. If you tap on this button, the ROUTE  
PROFILE settings window will open.  
The left symbol indicates which speed profile is set (in this example:  
car).  
The three symbols on the right indicate whether Motorways, Toll  
Roads and Ferries are permitted for calculating the route.  
4
For each route (orange, green, blue) there is a button with the same  
number and a symbol in the same colour. Indicated on each button are  
the estimated time of arrival, the total distance and the estimated  
duration of the particular route.  
If the MyRoutes function is activated, the route corresponding best to  
the selected route profile will be marked with "MyRoute".  
As soon as you tap on a button, navigation along the route in question  
will start.  
5
The destination is marked with a little flag.  
If you display a planned or loaded route, the starting point and each  
route point will be marked with a little flag.  
In the case of a multi-leg route, the distance and the estimated driving  
time for each leg are displayed.  
Tap on the  
(Route Profile) button (see Figure, point  
3) in order to view and if necessary change the profile on which the  
route calculation is based.  
To start the navigation, tap on the button for the route (see Figure,  
point 4) you want to use for the navigation.  
If you display a planned or loaded route, the route may be  
recalculated. The starting point for the calculation will now be your  
current location. You will first be guided to the first route point  
entered.  
Tap on Options > Turn-by-Turn List to view detailed directions for  
the route. (Refer to "Turn-by-Turn List” page 55)  
Tap on  
(Destination search) in order to view the map in  
Destination search mode. (Refer to "Map in Destination search  
Navigation  
- 46 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User’s manual NAVIGON 13xx | 23xx  
5.6.3  
Map in Navigation mode  
After the route was shown in Preview mode, navigation was started.  
The map opens in Navigation mode.  
1
2
3
4
Here is shown what signposts should be followed.  
Here you can see any speed limits, warning signs or prohibiting signs.  
The route is highlighted in orange.  
When two manoeuvres need to be executed in quick succession, the  
small arrow box indicates the second manoeuvre to be executed.  
5
The large arrow box shows a diagram of the next junction which you  
should turn on to. The distance remaining to this junction is indicated  
underneath.  
As you get closer to the junction you will see a spot diagram in addition  
to the distance:  
The nearer you get to the junction, the more yellow spots are displayed.  
If you don't have to change direction for a long time, you will see only a  
straight arrow. The distance you must continue straight on is indicated  
underneath the arrow.  
Tap on the large arrow box to hear current route instructions.  
6
(Only NAVIGON 23xx): The Traffic Information box opens if a  
reported traffic obstruction affects your route.  
If a distance is indicated in the Traffic Information box, no detour route  
was calculated yet for the traffic obstruction in question.  
Tap on the Traffic Information box in order to open the  
PREVIEW TMC window. It shows a map view with the route section  
affected by the message and a possible detour.  
Navigation  
- 47 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User’s manual NAVIGON 13xx | 23xx  
If no distance is indicated, all the obstructions which are reported for  
your route and would lead to a loss of time will be avoided.  
Tap on the Traffic Information box in order to open the TRAFFIC  
INFORMATION window. (Refer to "Displaying traffic information" on  
page 57.)  
Note: The calculation of detour routes to avoid reported traffic  
obstructions can be performed automatically. (Refer to "TMC Settings"  
on page 59.)  
7
8
The Parking box appears when you are near your destination.  
Tap on this box in order to select a car park near your destination  
as your new destination.  
Ahead of many junctions the information from points 9, 10 and 12 is  
hidden. Instead you are shown which lanes lead to your destination.  
Tap on the box in order to hide the lane information.  
9
The height above sea level and the current speed are shown here.  
10  
In the Total box you can see the distance remaining to the destination,  
the estimated duration of the trip and the estimated time of arrival.  
Tap on the arrival time if you want to see the estimated driving time  
instead.  
Tap once again on the info box if you want to see the estimated  
time of arrival.  
11  
12  
Your current position is indicated on the map (orange arrow). The  
section of the map displayed changes continually so that your current  
position is always in view on the map.  
If you are navigating a multi-leg route, you will see the remaining  
distance to the next interim destination and the estimated time of arrival  
in the Next box.  
Tap on the arrival time if you want to see the estimated driving time  
instead.  
Tap once again on the info box if you want to see the estimated  
time of arrival.  
13  
14  
The name of the route section that you need to drive onto next is shown  
in the upper road box.  
The name of the section you are currently driving on is shown in the  
lower road box.  
Note: The displays of many of the above mentioned areas can be  
configured in Options > Settings > Navigation. Some displays will only  
function if the required information is available on the map.  
Note: If you tap on the large arrow box, the current route instruction will  
be repeated.  
Navigation  
- 48 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
Tap on Options > Route > Turn-by-Turn List in order to view a turn-  
by-turn list. (Refer to "Turn-by-Turn List" on page 55.)  
Tap on  
(Destination search) in order to view the map in  
Destination search mode. (Refer to "Map in Destination search  
mode" on page 50)  
Volume  
The volume of the spoken driving instructions can be adjusted during  
navigation.  
1. Tap on  
(Volume).  
The volume bar opens. It contains three buttons for adjusting the  
volume.  
(Louder),  
(Quieter),  
(Volume on/off).  
2. Tap on  
(Volume) again or wait a few seconds.  
The volume bar closes.  
Quitting navigation  
Tap on  
(Back) in order to quit navigation.  
A dialog box will prompt you to confirm.  
Map options in Navigation mode  
Tap on Options. A window with several buttons opens.  
The most important functions for navigation can be reached via buttons  
with symbols.  
Other functions are found by tapping on one of the buttons Destination,  
Route, Services or General.  
A description of all available options can be found in the chapter  
5.6.4  
Reality View  
The map switches to Reality View mode when you approach one of the  
following points while driving on the motorway:  
NAVIGON 23xx (Reality View PRO):  
a motorway junction  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 49 -  
     
User’s manual NAVIGON 13xx | 23xx  
a three-leg motorway junction  
the exit you must take to leave the motorway  
NAVIGON 13xx (Reality View light):  
the exit you must take to leave the motorway  
The Reality View mode shows with greater clarity the signposting and  
lanes you must follow.  
This display does not change until you have passed the spot indicated.  
The map will then change back to Navigation mode.  
If you want to change to Navigation mode before then, just tap on any  
point on the map.  
Note: The Reality View mode is not available for all motorway  
junctions and three-leg motorway junctions. Availability depends on the  
map material used.  
5.6.5  
Map in Destination search mode  
The map is always in Destination search mode, when a pair of cross  
hairs are to be seen. Indicated in the address box are the coordinates  
and, where applicable, the name of the street under the cross hairs.  
When you are driving, the map does not change. It is always orientated  
with north at the top.  
Navigation  
- 50 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User’s manual NAVIGON 13xx | 23xx  
Zoom Out: The map section shown becomes larger, but you will see  
fewer details.  
Zoom In: The map section becomes smaller, but you will see more  
details.  
Zoom Mode: When this button is active you can mark out a section of  
the map with the stylus or your finger.  
Mark out the section from upper left to bottom right to zoom in until the  
section fills the screen.  
Mark out the map section from bottom right to top left to zoom out.  
Pan Mode: When this button is active you can change the section of  
map displayed with the stylus or your finger. Simply drag the map in the  
desired direction.  
Entire Route: Zooms the map so that the entire route is visible.  
Current Position: Selects the section of map displayed so that the  
current location is at the centre.  
Operating in Destination search mode  
1. Tap on the point to which you want to navigate.  
The destination that you have selected appears under the cross  
hairs.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 51 -  
User’s manual NAVIGON 13xx | 23xx  
The geographical coordinates of the destination and the  
corresponding address are shown in the bottom third of the screen.  
2. Tap on  
(OK).  
3. Buttons with various functions will be displayed.  
Take Me There: Starts navigation to the selected point. If you are currently  
navigating, this route navigation will be cancelled.  
MyReport: Opens the MYREPORT window. Here you can notify NAVIGON about  
any changes to traffic monitoring systems and routing.  
Interim Destination: Sets the selected point as interim destination. The  
navigation system will first guide you to this interim destination.  
Afterwards you can continue your original navigation.  
This function is only active during navigation.  
Add to Route: Adds the selected point to the route planning as the last point.  
Navigation will then continue to this point after you have reached the  
original destination or the other route points.  
Save: Opens the SAVE DESTINATION AS... window. You can enter a name  
under which the selected point will be saved in the FAVOURITES list.  
Search Nearby: Opens the POI NEARBY window. Here you can search for  
destinations near the selected point. (Refer to "POI nearby” page 27)  
Tap on  
(Destination search) or on  
(Back) in order to  
quit Destination search mode. You will be returned to the window  
from which you started this mode.  
5.7  
Useful functions  
5.7.1  
Nearby  
During the navigation, or after having opened the map using the Show  
Map button, you can have POIs, Favourites and traffic information of  
the current map view shown in a clearly arranged list.  
Note: This function is not available if the map was opened in one of the  
modes Destination search, Preview or Reality View.  
1. Tap on any point on the map.  
The NEARBY list opens. It contains POIs, Favourites or traffic  
messages of the current map view.  
2. Tap on an entry in the list in order to receive detailed information  
about it.  
You have the following options:  
Navigation  
- 52 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
Tap on Interim Destination in order to set the selected point as an  
interim destination. The navigation system will first guide you to this  
interim destination. Afterwards you can continue navigation to your  
original destination. The Interim Destination button is available in  
navigation mode only.  
Tap on Navigation in order to navigate to the selected point.  
Tap on Cancel in order to close the list again.  
Note: The Nearby function is available only if GPS reception is good  
enough.  
5.7.2  
Direct Help  
If you arrive at the scene of an accident or have an accident yourself, it  
may be necessary to call for emergency aid and to give the answering  
office your current location.  
Tap on Options > Direct Help.  
- or -  
During navigation tap on Options > Services > Direct Help.  
The DIRECT HELP window opens.  
If GPS reception is good enough, the address and the geographic  
cooordinates of your current location will be indicated.  
Tap on  
(Show on Map) if you want to view your current location  
on the map.  
In the bottom half of the window you will find the buttons for  
4 categories: Petrol Station, Police Station, Hospital, Pharmacy.  
Tap on the corresponding button.  
The nearest help point in the selected category will be indicated.  
You are shown the name, address, phone number (if known),  
distance and direction of the help point from your current location.  
You have the following options:  
Tap on the Map button in order to see your location and the help  
point on the map. This gives you an overview of the route to the  
help point.  
Tap on Navigation. You will then be guided directly to the displayed  
help point.  
You can use the  
help points in the selected category.  
The help points are sorted by distance from your current position.  
(Up) and  
(Down) buttons to select other  
Navigation  
- 53 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User’s manual NAVIGON 13xx | 23xx  
Use the  
window.  
(Back) button to return to the DIRECT HELP  
Note: Only those help points are displayed which are situated no further  
than 30 mi from your position.  
5.7.3  
GPS Status, saving the current location  
In the GPS STATUS window you will find an overview of the data the  
navigation system calculates from the GPS signals it receives.  
The GPS status can be accessed from the options button in many  
windows.  
1. Tap on Options > GPS Status.  
The current location can be saved in the FAVOURITES list.  
1. Tap on Save Position.  
The SAVE DESTINATION AS... dialog box opens.  
2. Enter a name for the destination.  
3. Tap on Save.  
5.7.4  
Block  
You can block a leg of the route at any time during a navigation, i.e. to  
re-calculate the route in order to avoid the leg, e.g. if you have heard on  
the radio of a traffic jam affecting this section.  
Note: The block is valid only for the current navigation. It no longer  
exists on a new navigation.  
You are currently in a navigation. The map is open in Navigation mode.  
1. Tap on Options.  
Buttons with various functions will be displayed.  
2. Tap on Block.  
The BLOCK menu opens. It contains buttons with different distance  
values.  
3. Select the distance you want to block.  
Note: If you are currently driving on a motorway, the alternative route  
will begin at the next exit. Indicated on the buttons is the junction up to  
which the block extends.  
The system recalculates the route. The blocked route section will be  
avoided. It is marked on the map in red.  
Navigation  
- 54 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User’s manual NAVIGON 13xx | 23xx  
Unblocking a route section  
Tap on Options > Unblock.  
The block will be lifted. The system recalculates the route. The un-  
blocked route section can now be integrated into the calculation.  
5.7.5  
Turn-by-Turn List  
You can display detailed directions of the calculated route before  
starting navigation or at any time during navigation. This list displays all  
of the driving instructions in table form.  
The map is open in Preview mode:  
Tap on Options > Turn-by-Turn List.  
The map is open in Navigation mode or in Reality View mode:  
Tap on Options > Route > Turn-by-Turn List.  
The TURN-BY-TURN LIST window opens.  
1
2
3
Schematic depiction of the next junction where you must make a turn.  
Distance to this junction.  
Route instruction and if available the name of the street into which you  
must turn.  
4
Indicates whether you want to drive on the route section in question or  
not.  
(Allow): The section in question is allowed on the route.  
(Forbid): The section in question is not allowed on the route.  
Navigation  
- 55 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User’s manual NAVIGON 13xx | 23xx  
Blocking route sections  
1. Tap on the route sections that you do not want to travel on so that  
the  
(Forbid) symbol appears next to them.  
2. Tap on  
(Modify Route).  
The navigation system calculates an alternative route avoiding the  
route sections selected. The new driving instructions are displayed  
in the TURN-BY-TURN LIST window.  
3. Tap on  
window again.  
(Back) in order to close the TURN-BY-TURN LIST  
Removing blocks and using original routes  
Section blocks can be removed at any time.  
Tap in the TURN-BY-TURN LIST window on Options > Calculate  
Original Route.  
5.7.6  
TMC (Traffic Information) (only NAVIGON 23xx)  
The integrated TMC receiver enables the navigation system to make  
use of current traffic messaging. If necessary it can change your route  
dynamically, for example in order to avoid a traffic jam.  
Note: TMC is available free of charge in many European countries.  
PremiumTMC, promising a faster and more up-to-date service, is  
offered (exclusively or in addition) in some countries at a charge.  
You can subscribe to PremiumTMC services on our website  
Preview TMC  
If a new traffic message concerning your route arises while navigation is  
in progress, the Traffic Information button will appear at the right edge  
of the screen.  
Recalculate Route: Automatically  
If you have selected Automatically for the Recalculate Route setting, the  
button will not show a distance. The traffic obstruction will be avoided  
automatically.  
Recalculate Route: On Request  
If you have selected On Request, the distance to the reported traffic  
obstruction will be indicated on the button. The button will turn red if the  
distance is less than 50 km.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 56 -  
     
User’s manual NAVIGON 13xx | 23xx  
Tap on the  
(Traffic Information) button.  
The PREVIEW TMC window opens. It shows a map view with the  
route section affected by the message. If the reported obstruction is  
likely to involve a considerable loss of time, a possible detour will  
also be shown.  
Tap on the button of the route you want to follow.  
- or -  
Tap on the Details button.  
The TRAFFIC INFORMATION window opens. (Refer to "Displaying  
Note: If you tap on a traffic symbol (in the display:  
) in the map view  
of the PREVIEW TMC, a window with detailed information about this  
message will open. (Refer to "Showing a single message in detail" on  
page 59.)  
Displaying traffic information  
Current traffic information is available via the options button in many  
windows.  
Tap in the NAVIGATION window on Options > Traffic.  
The TRAFFIC INFORMATION window opens.  
You can use the  
messages.  
(Up) and  
(Down) buttons to scroll in the list of  
Tap on  
(Back) in order to close the TRAFFIC INFORMATION  
window again.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 57 -  
 
User’s manual NAVIGON 13xx | 23xx  
1
The Traffic Information button shows the type of traffic messaging listed  
and how many messages of this type are in the list.  
Tap on Traffic Information in order to select the messages you want  
displayed.  
2
3
This mark indicates that the message in question comes from a  
PremiumTMC provider.  
Here you can see how serious the obstruction is:  
Red: The section is blocked by the obstruction. This can be the case for  
example with road blocks.  
Yellow: The section is not blocked by the obstruction but there is a  
threat of considerable delays. This can be the case for example with  
traffic jams or when one of several lanes is blocked off.  
No colour: The obstruction is not classified as serious. This can be the  
case for example when slow-moving traffic is reported on a very short  
section, when SOS telephones are not working or when parking areas  
are blocked off.  
4
Here you can see how far you are from this obstruction. If the  
obstruction does not lie on your route or if a detour route was already  
calculated for this obstruction, then the distance as the crow flies will be  
shown.  
Note: Most radio stations report only traffic obstructions in their own  
state.  
5
6
7
Here the reported obstruction is displayed as a traffic sign.  
Here the affected road is indicated.  
Here you can see on which section of the road the obstruction lies.  
Navigation  
- 58 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User’s manual NAVIGON 13xx | 23xx  
8
9
The navigation system can Detour (  
the route. The button shows the active status.  
Tap on the button to select the alternative setting.  
) or Ignore (  
) congestion on  
(Show on Map): This button is only available if at least one of the  
indicated messages concerns your route. Tap on this button in order to  
open the PREVIEW TMC window. (Refer to "Preview TMC" on page 56.)  
Showing a single message in detail  
Tap on a message to display this information in detail.  
Tap on the  
(Show on Map) button in order to view the section  
concerned on the map.  
TMC Settings  
In the Settings window tap on TRAFFIC INFORMATION.  
In the TMC SETTINGS window you can set the TMC traffic station and  
configure whether the reception of a traffic message concerning your  
route should affect your route planning and if so how.  
Tuning Mode  
Tap on Tuning Mode and select a method for selecting the TMC radio  
station.  
Automatic: You can use the arrow keys in the station area to select  
another station. The system will search for another station if  
reception becomes poor.  
Hold station: You can use the arrow keys in the station area to  
select another station. The system will search for the same station  
on a different frequency if the signal becomes poor.  
Hold frequency: You can use the arrow keys in the station area to  
select another frequency. The system will not search for another  
station if reception becomes poor.  
Recalculate Route  
Tap on Recalculate Route and select how new traffic messages  
concerning your route are to be used.  
Automatically: An alternative route will be calculated automatically.  
The system will inform you on the recalculation.  
On Request: An announcement from the navigation device tells you  
that a traffic message concerns your route. On the screen the  
Traffic Information box indicates the distance to the reported traffic  
obstruction.  
Navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 59 -  
   
User’s manual NAVIGON 13xx | 23xx  
Tap on the Traffic Information box. You can then decide whether an  
alternative route is to be calculated or not.  
6
Configuring the NAVIGON 13xx | 23xx  
The SETTINGS window is the starting point for customising the  
NAVIGON 13xx | 23xx to match your personal preferences.  
Settings can be accessed via the options in the NAVIGATION window  
and via the options in many windows of the navigation application.  
Tap on Options > Settings.  
The SETTINGS window of the navigation application has several buttons:  
Navigation, Route Profile, Map Display and General.  
Tap on a button to open the corresponding settings window.  
The settings of the individual windows are distributed over several  
screen pages. You can toggle between them with the (To the Left)  
and (To the Right) buttons.  
Some settings can have only one of two values. These settings can be  
recognised by the (Toggle) button. All possible values are visible.  
The currently valid value is highlighted in white.  
Tap on  
values.  
(Toggle) in order to switch between the possible  
Some settings can adopt many different values. These settings can be  
recognised by the (List) button. The current value is visible.  
1. Tap on  
(List).  
A list with all possible values opens. The currently valid value is  
marked.  
2. Tap on the value you want. It is now marked.  
3. Tap on OK.  
The list closes. The new value is indicated.  
Configuring the NAVIGON 13xx | 23xx  
- 60 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User’s manual NAVIGON 13xx | 23xx  
For each setting there is a  
(Help) button. When you tap on it you  
will see an exact definition of the setting in question.  
You can close the settings windows in two ways:  
Tap on OK.  
Any changes you have made will be adopted.  
Tap on Cancel.  
Any changes you have made will not be adopted.  
Configuring the NAVIGON 13xx | 23xx  
- 61 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User’s manual NAVIGON 13xx | 23xx  
7
Appendix  
7.1  
Technical data  
Dimensions  
Weight  
95.8 x 72.3 x 17.6 mm  
approx. 120 g  
Operating  
temperature  
Storage  
temperature  
Humidity  
-10°C to 60°C (14°F to 140°F)  
-30°C to 70°C (-22°F to 158°F)  
Operating  
conditions  
0% to 90%, non-precipitating  
Centrality Atlas III AT642D-XAC,  
375MHz  
CPU  
Operating system  
Microsoft Windows CE  
3.5” LCD colour display with resistive  
touch-panel  
320 x 240 pixel (QVGA)  
Landscape, transmissive  
NAVIGON 1300 | 2300: 512 MB  
NAVIGON 1310 | 2310: 2 GB  
64 MB  
Display  
Flash  
RAM  
Memory  
GPS  
Yes (SiRF GRF3i+, Baseband Atlas  
III))  
Built-in antenna  
TMC  
Device keys  
Yes (only NAVIGON 23xx)  
1 (On/Off)  
Keyboard  
Loudspeaker  
Memory card  
USB  
Software keyboard  
Yes  
microSD-Slot  
I/O  
USB 1.1  
Power supply  
Via USB socket  
Rechargeable Type  
Li-Ion, 740 mAh  
battery  
Running time  
Electronic  
Duration  
Input  
Output  
Input  
Up to 1 hour  
Integrated  
approx. 2-3 hours  
100-240V ~ (alternating current, AC)  
5V / 1.2A = (direct current, DC)  
10-24V = (direct current, DC)  
5V / 1.2A = (direct current, DC)  
Charging  
Power pack  
(accessories)  
Car charger  
cable  
Output  
7.2  
Declaration of conformity  
The NAVIGON 13xx | 23xx described in this manual bears the CE label  
among others.  
Products with the CE marking comply with Radio & Telecommunication  
Terminal Equipment Directive (R&TTE) (1999/5/ECC), the  
Electromagnetic Compatibility Directive (89/336/ECC) and the Low  
Appendix  
- 62 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
User’s manual NAVIGON 13xx | 23xx  
Voltage Directive (73/23/ECC) – as amended by Directive 93/68/ECC –  
issued by the European Community Commission.  
Compliance with these directives implies conformity with the following  
European Standards:  
EN 300 440-1 V1.3.1 (2001-09), EN 300 440-2 V1.1.2 (2004-07), EN  
301 489-1 V1.6.1 (2005-09), EN 301 489-3 V1.4.1 (2002-08), Class 1,  
EN 55022:2006, Class B, EN 61000-4-2:1995+A1:1998+A2:2001, EN  
61000-4-3:2006, EN 60950-1:2006  
The manufacturer is not liable for modifications made by the user which  
may alter the device's conformity with the applicable directives and  
standards, nor for the consequences thereof.  
8
Troubleshooting  
In this chapter you will find solutions to problems which may arise  
during use of the NAVIGON 13xx | 23xx.  
This list does not claim to be complete. Answers to many other  
questions can be found on the NAVIGON AG website. (Refer to  
I have connected a charger to the NAVIGON 13xx | 23xx. A connection to a  
computer is shown on the display.  
or  
I have connected the NAVIGON 13xx | 23xx to a computer but it is not  
detected as a removable disc.  
The USB connector is not fully inserted in the case.  
1. Unplug the connector.  
The navigation device will carry out a new start. Wait for the  
navigation software to be reloaded.  
2. Without delay, insert the USB connector from the charger into the  
corresponding socket of the NAVIGON 13xx | 23xx as far as it will  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 63 -  
   
User’s manual NAVIGON 13xx | 23xx  
My NAVIGON 13xx | 23xx makes no response any longer, the screen is  
frozen.  
Perform a reset. This can be done in two ways:  
1. Use a thin object to press the Reset key. (Refer to "Description of  
The device is now deactivated.  
2. Press the  
(On/Off) key for at least 10 seconds.  
The software will be restarted. Your settings and your saved  
destinations and routes will be retained.  
- or –  
1. Press the  
(On/Off) key for at least 6 seconds.  
The device is now deactivated.  
2. Press the  
(On/Off) switch for at least 10 seconds.  
The software will be restarted. Your settings and your saved  
destinations and routes will be retained.  
I can't change the "Advise of Safety Cameras" setting. The box is  
deactivated.  
First tap on the  
(Help) button for this setting.  
A window containing information opens. Read the information.  
Tap on OK.  
The information window is closed. You can now activate the Advise of  
Safety Cameras function.  
Note: Use only accessories which are recommended by NAVIGON  
expressly for the NAVIGON 13xx | 23xx. NAVIGON AG accepts no  
liability for errors or damages resulting from the use of other  
accessories.  
For suitable accessories go to www.navigon.com or your authorised  
dealer.  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 64 -  
User’s manual NAVIGON 13xx | 23xx  
9
Index  
Enter Coordinates............................. 26  
Entering data..................................... 21  
A
Advise of Safety Cameras................. 64  
F
Favourites ................................... 31, 36  
B
Block............................................ 54, 56  
G
GPS  
C
Faulty reception............................ 22  
Initialise......................................... 23  
Signals.......................................... 16  
Symbols........................................ 18  
GPS Status ....................................... 54  
Compass ........................................... 18  
Configuration..................................... 60  
Conventions followed in this  
manual................................................. 5  
Current Position  
Save.............................................. 54  
H
Home Address  
D
Edit ............................................... 37  
Home Address ............................ 33, 36  
Hotline................................................. 6  
Data entry.......................................... 21  
Destination  
Direct Access................................ 30  
Enter Coordinates......................... 26  
Favourites..................................... 31  
From Map ..................................... 33  
Home Address........................ 33, 36  
Imported Addresses...................... 32  
Last Destinations .......................... 32  
My Destinations ............................ 24  
Navigation..................................... 34  
New Destination............................ 24  
POI................................................ 27  
in a City .................................... 29  
Nationwide................................ 28  
Nearby...................................... 27  
Save.............................................. 36  
Take Me Home ....................... 33, 36  
Turn-by-Turn List .......................... 35  
Direct Help......................................... 53  
I
Imported Addresses.......................... 32  
K
Keyboard........................................... 20  
L
Last Destinations ........................ 32, 36  
M
Manual  
Conventions.................................... 5  
Symbols.......................................... 5  
Map  
E
Destination search........................ 50  
Navigation..................................... 47  
Energy......................................... 11, 19  
Index  
- 65 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User’s manual NAVIGON 13xx | 23xx  
Preview......................................... 45  
Reality View.................................. 49  
Memory card ..................................... 12  
Menu ................................................. 22  
Muting................................................ 19  
My Destinations................................. 24  
MyRoutes .................................... 35, 41  
R
Reality View ...................................... 49  
Recalculate Route............................. 59  
Route Planning ................................. 37  
Route points  
Add ............................................... 38  
Delete ........................................... 39  
Order ............................................ 39  
Starting Point................................ 38  
Route Profile ............................... 34, 41  
Routes  
N
Navigation  
Block....................................... 54, 56  
MyRoutes................................ 35, 41  
Navigation..................................... 35  
No GPS................................... 35, 42  
Route Profile........................... 34, 41  
Start ........................................ 34, 41  
Turn-by-Turn List .................... 35, 41  
Unblock......................................... 55  
Navigation Application  
Manage......................................... 39  
Navigation..................................... 41  
Planning........................................ 37  
Route points ................................. 38  
Route Profile................................. 41  
Save ............................................. 39  
Show............................................. 40  
Simulation..................................... 40  
Starting Point................................ 37  
Turn-by-Turn List.......................... 41  
Start .............................................. 22  
NAVIGON 13xx | 23xx  
Description...................................... 7  
Energy .......................................... 11  
Installation....................................... 9  
Memory card................................. 12  
Scope of Delivery............................ 6  
Start .............................................. 16  
TMC.............................................. 12  
New Destination ................................ 24  
S
Safety information............................... 7  
Scope of Delivery................................ 6  
Service................................................ 6  
Settings  
Advise of Safety Cameras............ 64  
Configuration ................................ 60  
Volume ......................................... 49  
Simulation  
O
Exit................................................ 40  
Start.............................................. 40  
Software keyboard............................ 20  
Support................................................ 6  
Symbols used in this manual .............. 5  
Options.................................. 18, 22, 42  
P
POI  
Direct Access................................ 30  
in a City......................................... 29  
Nationwide.................................... 28  
Nearby .......................................... 27  
Preview TMC..................................... 56  
T
Take Me Home............................ 33, 36  
TMC  
Preview TMC................................ 56  
Recalculate Route ........................ 59  
Show............................................. 57  
Index  
- 66 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User’s manual NAVIGON 13xx | 23xx  
Symbols........................................ 18  
Tuning Mode................................. 59  
TMC Settings  
Block............................................. 56  
Show................................. 35, 41, 55  
Recalculate Route ........................ 59  
TMC.............................................. 59  
Traffic Information......................... 59  
Tuning Mode................................. 59  
Trade marks ........................................ 5  
Traffic Information  
Preview TMC ................................ 56  
Recalculate Route ........................ 59  
Show............................................. 57  
Tuning Mode................................. 59  
Troubleshooting................................. 63  
Tuning Mode ..................................... 59  
Turn-by-Turn List  
U
Unblock ............................................. 55  
V
Volume.............................................. 49  
W
Warranty.............................................. 5  
Index  
- 67 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Vacuum Cleaner S183 User Manual
MTX Audio Speaker MXS1004 User Manual
Newcon Optik Binoculars NVS 22 2XT User Manual
Nortel Networks Switch 5510 User Manual
Onkyo Car Stereo System CR 515 CR 315 User Manual
Ozaki Worldwide Portable Speaker dotodot50 User Manual
Panasonic Welder LX 200PX User Manual
ParaBody Home Gym 888101 User Manual
Paradyne Network Card DMD15 User Manual
Parkside Heat Gun PHLG 2000 B1 User Manual