Nady Systems Insulin Pen ADI 2 User Manual

SERVICE FOR YOUR NADY AUDIO PRODUCT  
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service  
Department via telephone at (510) 652-2411, or e-mail at [email protected].  
OWNER’S MANUAL  
(International) For service, please contact the NADY AUDIO distributor in your country  
through the dealer from whom you purchased this product.  
DO NOT ATTEMPT TO SERVICE THIS UNIT  
YOURSELF AS IT CAN BE DANGEROUS AND  
WILL ALSO VOID THE WARRANTY.  
ADI-2  
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608  
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com  
2 Channel Active Direct Inject Box  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Connections  
2
7
1
6
4
5
3
4
5
(1) ON/OFF SWITCH  
When set to ON, this enables the 9V battery power for the unit. If the device connected  
to the ADI-2 XLR output has 25V-48V phantom power enabled, the ADI-2 can be used  
without draining the 9V battery. Disabling the ON/OFF button will save battery power  
when using phantom power. Always remember to turn off the ADI-2 ON/OFF switch when  
not in use to preserve your battery.  
(4) 1/4" INPUTS  
Unbalanced 1/4" input jack for inputting a line level, instrument level, or speaker level  
signal.  
(5) 1/4" LINK OUTPUTS  
Unbalanced 1/4" output jack which is in parallel with the input jack. This allows the ADI-2  
to be used as a Y-splitter by sending the input signal to another device via the 1/4" output  
as well as sending it from the balanced XLR output.  
CAUTION: Always turn on the ADI-2 before turning up the volume on devices connected  
to the ADI-2 outputs to avoid damaging your equipment or speakers.  
(2) GROUND LIFT SWITCH  
(6) XLR OUTPUTS  
When set to LIFT, this disconnects the ground connection between the 1/4" input and XLR  
Balanced XLR output jack [Pin 1 = Ground, Pin 2 = Hot(+), Pin 3 = Cold(-)]  
output to eliminate hum caused by ground loops.  
(7) BATTERY COMPARTMENT  
(3) SPEAKER/GUITAR BUTTON  
Remove screw and panel to install 9V battery.  
When pushed in, this enables a 35dB pad, allowing the input to receive high level signals  
from speaker or amplifier outputs.  
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Mr Coffee Coffeemaker ECMP3 User Manual
MTD Lawn Mower Series 790 User Manual
Multi Tech Systems Computer Hardware ISI5634PCI 4 8 User Manual
Network Computing Devices Server KNS30 User Manual
Nikon Camcorder COOLPIX S2600 User Manual
Nikon Projector HT1000 User Manual
Oki Printer 5800Ldn User Manual
Panasonic Camera Flash DMC TZ35 User Manual
Panasonic Fax Machine KX FPG372 User Manual
Panasonic Security Camera GP MF130 User Manual