3. Click Install SmartWizard. Follow the prompts to complete the installation of
6PDUWꢀ6ZLWFK
the SmartWizard GearDiscovery utility.
)6ꢁꢂꢃ7ꢀ6KRZQ
ꢀ™ÄÍ??͉™ËꢁÖ‰aj
4. Click OK when done.
.”?ÁÍË.݉ÍW†Ë.jÁ‰jÄ
Next, Connect Your Smart Switch in the Correct Order
Start Here
Follow these instructions to set up your smart switch.
Note: These instructions assume you are using DHCP in your network. If you are
using static IP addressing in your network, configure the switch IP address before
connecting it to your network. In the absence of a DHCP server, the switch will
default to 192.168.0.239 for its IP address. To configure the switch before
connecting it to your network, set up the PC with an IP address in the 192.168.0.x
subnet, and connect the PC to the switch. Then, use the Smartwizard Discovery
utility as illustrated below to configure the switch.
3&ꢀZLWKꢀ6PDUW:L]DUGꢀ'LVFRYHU\ꢀ8WLOLW\
Prepare to Install Your Smart Switch
Now, Configure the Switch with the SmartWizard
Discovery Utility
•
•
Prepare a PC with an Ethernet adapter and a CD ROM drive.
Before proceeding with the smart switch installation, familiarize yourself with
the contents of the Resource CD, especially the manuals.
1. Connect the smart switch to your network.
1. Double click the SmartWizard GearDiscovery icon
on your desktop or
First, Install the Smartwizard Discovery Utility on a PC
in Windows Start menu Programs to run the utility and view this screen.
6PDUWꢀ6ZLWFK
ꢀꢀꢀꢀ)6ꢁꢂꢃ7ꢀ6KRZQ
1. Power on your PC, let the operating system boot up completely, and log in as
needed.
2. Insert the Resource CD for the Smart Switch Series into your CD-ROM drive.
The CD main page shown below will load.
6HUYHUV
&RPSXWHUV
3ULQWHUV
2. Power on the switch.
3. Verify that the PC with the SmartWizard GearDiscovery utility is on the same
subnet as the switch.
2. Click Discover to find your switch in the network.
Download from Www.Somanuals.com. All Manuals Search And Download.
|