NETGEAR Network Card WPN111NA User Manual
NETGEAR RangeMax  
Next Wireless USB 2.0  
Adapter WN111 User  
Manual  
NETGEAR, Inc.  
4500 Great America Parkway  
Santa Clara, CA 95054 USA  
202-10365-01  
December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
•
•
•
Reorient or relocate the receiving antenna  
Increase the separation between the equipment or devices  
Connect the equipment to an outlet other than the receiver’s  
Consult a dealer or an experienced radio/TV technician for assistance  
FCC Caution: Any change or modification to the product not expressly approved by Netgear could void the user’s  
authority to operate the device.  
FCC RF Radiation Exposure and SAR Statements  
SAR Statement  
The NETGEAR WN111 has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC has  
established detailed SAR requirements and has established that these requirements have been met while installed in host  
notebook computer.  
RF Exposure Information  
The radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the  
requirements as set forth in CFR 47 Sections, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency  
devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest  
SAR level measured for this device was 0.74 W/kg.  
Canadian Department of Communications Industry Canada (IC) Notice  
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de la classe B  
est conforme à la norme NMB-003 et CNR-210 du Canada.  
“To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from  
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to  
licensing.”  
“Pour empêcher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit être utilisé à  
l’intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son  
antenne d’émission) est installé à l’extérieur, il doit faire l’objet d’une licence.”  
Europe - EU Declaration of Conformity  
A printed copy of the EU Declaration of Conformity certificate for this product is provided in the WN111 product  
package.  
Èesky  
[Czech]  
NETGEAR, Inc. tímto prohlašuje, že tento NETGEAR RangeMax Next Wireless USB 2.0  
Adapter WN111 je ve shodì se základními požadavky a dalšími pøíslušnými ustanoveními  
smìrnice 1999/5/ES.  
Dansk  
[Danish]  
Undertegnede NETGEAR, Inc. erklærer herved, at følgende udstyr NETGEAR  
RangeMax Next Wireless USB 2.0 Adapter WN111 overholder de væsentlige krav og  
øvrige relevante krav i direktiv 1999/5/EF.  
iii  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deutsch  
[German]  
Hiermit erklärt NETGEAR, Inc., dass sich das Gerät NETGEAR RangeMax Next  
Wireless USB 2.0 Adapter WN111 in Übereinstimmung mit den grundlegenden  
Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG  
befindet.  
Eesti  
[Estonian]  
Käesolevaga kinnitab NETGEAR, Inc. seadme NETGEAR RangeMax Next Wireless  
USB 2.0 Adapter WN111 vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud  
direktiivist tulenevatele teistele asjakohastele sätetele.  
English  
Hereby, NETGEAR, Inc., declares that this NETGEAR RangeMax Next Wireless USB  
2.0 Adapter WN111 is in compliance with the essential requirements and other relevant  
provisions of Directive 1999/5/EC.  
Español  
[Spanish]  
Por medio de la presente NETGEAR, Inc. declara que el NETGEAR RangeMax Next  
Wireless USB 2.0 Adapter WN111 cumple con los requisitos esenciales y cualesquiera  
otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.  
Ελληνική  
[Greek]  
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR, Inc. ΔΗΛΩΝΕΙ ΟΤΙ NETGEAR RangeMax Next  
Wireless USB 2.0 Adapter WN111 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ  
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.  
Français  
[French]  
Par la présente NETGEAR, Inc. déclare que l'appareil NETGEAR RangeMax Next  
Wireless USB 2.0 Adapter WN111 est conforme aux exigences essentielles et aux autres  
dispositions pertinentes de la directive 1999/5/CE.  
Italiano  
[Italian]  
Con la presente NETGEAR, Inc. dichiara che questo NETGEAR RangeMax Next  
Wireless USB 2.0 Adapter WN111 è conforme ai requisiti essenziali ed alle altre  
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.  
Latviski  
[Latvian]  
Ar šo NETGEAR, Inc. deklarç, ka NETGEAR RangeMax Next Wireless USB 2.0 Adapter  
WN111 atbilst Direktîvas 1999/5/EK bûtiskajâm prasîbâm un citiem ar to saistîtajiem  
noteikumiem.  
Lietuviø  
Šiuo NETGEAR, Inc. deklaruoja, kad šis NETGEAR RangeMax Next Wireless USB 2.0  
[Lithuanian]  
Adapter WN111 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.  
Nederlands  
[Dutch]  
Hierbij verklaart NETGEAR, Inc. dat het toestel NETGEAR RangeMax Next Wireless  
USB 2.0 Adapter WN111 in overeenstemming is met de essentiële eisen en de andere  
relevante bepalingen van richtlijn 1999/5/EG.  
Malti  
[Maltese]  
Hawnhekk, NETGEAR, Inc., jiddikjara li dan NETGEAR RangeMax Next Wireless USB  
2.0 Adapter WN111 jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li  
hemm fid-Dirrettiva 1999/5/EC.  
Magyar  
[Hungarian]  
Alulírott, NETGEAR, Inc. nyilatkozom, hogy a NETGEAR RangeMax Next Wireless USB  
2.0 Adapter WN111 megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC  
irányelv egyéb elõírásainak.  
Polski [Polish] Niniejszym NETGEAR, Inc. oœwiadcza, ¿e NETGEAR RangeMax Next Wireless USB  
2.0 Adapter WN111 jest zgodny z zasadniczymi wymogami oraz pozosta³ymi stosownymi  
postanowieniami Dyrektywy 1999/5/EC.  
iv  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Português  
NETGEAR, Inc. declara que este NETGEAR RangeMax Next Wireless USB 2.0 Adapter  
[Portuguese] WN111 está conforme com os requisitos essenciais e outras disposições da Directiva  
1999/5/CE.  
Slovensko  
[Slovenian]  
NETGEAR, Inc. izjavlja, da je ta NETGEAR RangeMax Next Wireless USB 2.0 Adapter  
WN111 v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloèili direktive 1999/5/  
ES.  
Slovensky  
[Slovak]  
NETGEAR, Inc. týmto vyhlasuje, že NETGEAR RangeMax Next Wireless USB 2.0  
Adapter WN111 spåòa základné požiadavky a všetky príslušné ustanovenia Smernice  
1999/5/ES.  
Suomi  
[Finnish]  
NETGEAR, Inc. vakuuttaa täten että NETGEAR RangeMax Next Wireless USB 2.0  
Adapter WN111 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä  
koskevien direktiivin muiden ehtojen mukainen.  
Svenska  
[Swedish]  
Härmed intygar NETGEAR, Inc. att denna [utrustningstyp] står I överensstämmelse med  
de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv  
1999/5/EG.  
Product and Publication Details  
Model Number:  
WN111  
Publication Date:  
Product Family:  
December 2007  
Wireless USB 2.0 Adapter  
Product Name:  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111  
Home or Business Product:  
Language:  
Home  
English  
Publication Part Number:  
202-10365-01  
v
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vi  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
About This Manual  
Conventions, Formats, and Scope ................................................................................... ix  
How to Use This Manual ................................................................................................... x  
How to Print this Manual .................................................................................................... x  
Chapter 1  
Basic Setup  
What You Need Before You Begin ..................................................................................1-1  
Verify System Requirements ....................................................................................1-1  
Observe Wireless Location and Range Guidelines ..................................................1-2  
What Is In the Box ..........................................................................................................1-2  
WN111 Default Wireless Settings ...................................................................................1-3  
Installation ......................................................................................................................1-3  
Connecting to Wireless Networks and the Internet ........................................................1-9  
WN111 Icon Colors ..................................................................................................1-9  
Smart Wizard Status Bar ........................................................................................1-10  
WN111 LED ............................................................................................................1-11  
Placing the USB Adapter Cradle ..................................................................................1-11  
Removing the WN111 Software ....................................................................................1-12  
Upgrading the WN111 Software ...................................................................................1-13  
Chapter 2  
Network Connections and Wireless Security  
Disabling the Windows Zero Configuration Utility ...........................................................2-1  
Understanding the Smart Wizard ...................................................................................2-2  
Viewing Wireless Networks in Your Area ........................................................................2-2  
Joining a Network ...........................................................................................................2-4  
Using WPS to Connect to a Wireless Network ........................................................2-4  
Manually Selecting a Wireless Network ...................................................................2-9  
Profiles ..........................................................................................................................2-12  
Adding Profiles .......................................................................................................2-12  
vii  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up a Profile to Connect to an Access Point or Router ......................................2-12  
Setting up a Computer-to-Computer (Ad Hoc) Profile ..................................................2-14  
Starting a Computer-to-Computer (Ad Hoc) Network Connection .........................2-16  
Wireless Security ..........................................................................................................2-17  
Using Wireless Security Features ................................................................................2-17  
Wireless Network Name (SSID) and Security Settings ................................................2-17  
Setting up WEP Encryption Security ............................................................................2-18  
Setting up WPA-PSK Security ......................................................................................2-20  
Setting up WPA2-PSK Security ....................................................................................2-21  
Statistics Tab .................................................................................................................2-22  
About Tab .....................................................................................................................2-23  
Advanced Settings ........................................................................................................2-24  
Chapter 3  
Wireless Network Performance  
Optimizing Wireless Performance ..................................................................................3-1  
Optimizing Your Network Bandwidth ..............................................................................3-3  
Overview of Home and Small Office Networking Technologies ......................................3-4  
Assessing Your Speed Requirements ......................................................................3-5  
Chapter 4  
Troubleshooting  
Troubleshooting Tips ......................................................................................................4-1  
Ad Hoc Mode Is Not Working Correctly ..........................................................................4-3  
Windows XP Occasional Connection Problems .............................................................4-3  
Appendix A  
Technical Specifications and Factory Default Settings  
Technical Specifications ................................................................................................. A-1  
Factory Default Settings ................................................................................................ A-2  
Appendix B  
Related Documents  
viii  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About This Manual  
®
The NETGEAR RangeMax™ Wireless USB 2.0 Adapter WN111 User Manual describes how to  
install, configure and troubleshoot the NETGEAR RangeMax Next Wireless USB 2.0 Adapter  
WN111. The information in this manual is intended for readers with intermediate computer and  
Internet skills.  
Conventions, Formats, and Scope  
The conventions, formats, and scope of this manual are described in the following paragraphs:  
•
Typographical Conventions. This manual uses the following typographical conventions:  
Italics  
Emphasis, books, CDs, URL names  
User input  
Bold  
•
Formats. This manual uses the following formats to highlight special messages:  
Note: This format is used to highlight information of importance or special interest.  
Tip: This format is used to highlight a procedure that will save time or resources.  
•
Scope. This manual is written for the RangeMax Next WN111 Wireless USB 2.0 Adapter  
according to these specifications:  
Product Version  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111  
December 2007  
Manual Publication Date  
ix  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
For more information about network technologies, see the links to the NETGEAR website in  
Appendix B, “Related Documents”.  
Note: Product updates are available on the NETGEAR, Inc. website at  
http://kbserver.netgear.com/products/WN111.asp.  
How to Use This Manual  
The HTML version of this manual includes the following:  
•
Buttons,  
at a time  
and  
, for browsing forwards or backwards through the manual one page  
•
A
button that displays the table of contents and an  
button. Double-click on a  
link in the table of contents or index to navigate directly to where the topic is described in the  
manual.  
•
•
A
model.  
button to access the full NETGEAR, Inc. online knowledge base for the product  
Links to PDF versions of the full manual and individual chapters.  
How to Print this Manual  
To print this manual you can choose one of the following several options, according to your needs.  
•
•
Printing a Page in the HTML View.  
Each page in the HTML version of the manual is dedicated to a major topic. Use the Print  
button on the browser toolbar to print the page contents.  
Printing a Chapter.  
Use the PDF of This Chapter link at the top left of any page.  
— Click the PDF of This Chapter link at the top left of any page in the chapter you want to  
print. The PDF version of the chapter you were viewing opens in a browser window.  
— Your computer must have the free Adobe Acrobat reader installed in order to view and  
print PDF files. The Acrobat reader is available on the Adobe website at  
http://www.adobe.com.  
x
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
— Click the print icon in the upper left of the window.  
Tip: If your printer supports printing two pages on a single sheet of paper, you can  
save paper and printer ink by selecting this feature.  
•
Printing the Full Manual.  
Use the Complete PDF Manual link at the top left of any page.  
— Click the Complete PDF Manual link at the top left of any page in the manual. The PDF  
version of the complete manual opens in a browser window.  
— Click the print icon in the upper left of the window.  
Tip: If your printer supports printing two pages on a single sheet of paper, you can  
save paper and printer ink by selecting this feature.  
xi  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
xii  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
Basic Setup  
This chapter describes how to install your RangeMax Next WN111 Wireless USB 2.0 Adapter and  
set up basic wireless connectivity on your Wireless Local Area Network (WLAN). Advanced  
wireless network set up is covered in Chapter 2, “Network Connections and Wireless Security”.  
Note: Indoors, computers can easily connect to 802.11 wireless networks at distances of  
several hundred feet. Because walls do not always block wireless signals, others  
outside your immediate area could access your network. It is important to take  
steps to secure your network from unauthorized access. The wireless USB adapter  
provides highly effective security features, which are covered in “Using Wireless  
Security Features” in Chapter 2. Use the security features appropriate to your  
needs.  
What You Need Before You Begin  
You need to verify that your computer meets the minimum system requirements and identify the  
wireless network settings of the WLAN where you will connect before you can set up your  
wireless USB adapter and connect.  
Verify System Requirements  
Before installing the NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111, please make  
sure that these minimum requirements have been met:  
•
You must have a PC with a Pentium 300 MHz or higher compatible processor with an  
available USB 2.0 or 1.1 port.  
Note: The maximum speed of a USB v2.0 port is 480 Mbps. If your computer has a  
USB v1.1 port, the WN111 is limited to that port’s maximum speed, which is  
14 Mbps.  
•
•
A CD drive.  
10 Mbytes of free hard disk space.  
1-1  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
•
Vista, Windows XP Home, Windows XP Professional, or Windows 2000. Some versions of  
Windows might ask for the original Windows operating system installation files to complete  
the installation of the WN111 driver software.  
Note: Windows XP users must install SP2 or install the KB822603 Hot fix, which fixes  
the USB 2.0 Host controller driver. Go to the following link to install the Hot fix:  
http://www.microsoft.com/downloads/  
details.aspx?displaylang=en&FamilyID=733dd867-56a0-4956-b7fe-  
e85b688b7f86  
Observe Wireless Location and Range Guidelines  
For best performance, place the wireless USB adapter at least 4 feet (over 1 meter) away from the  
wireless router or access point.  
Computers can connect over wireless networks indoors at a range which vary significantly based  
on the physical location of the computer with the RangeMax Next WN111 Wireless USB 2.0  
Adapter. For best results, avoid potential sources of interference, such as:  
•
•
•
Large metal surfaces  
Microwaves  
2.4 GHz Cordless phones  
In general, wireless devices can communicate through walls. However, if the walls are constructed  
with concrete, or have metal, or metal mesh, the effective range will decrease if such materials are  
between the devices.  
What Is In the Box  
The product package should contain the following items:  
•
•
•
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111  
Installation Guide for the NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111  
Resource CD, including:  
— Driver and Configuration Utility Software  
— NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual (this  
document)  
— Animated Network Properties Configuration Tutorial  
— PC Networking Tutorial  
1-2  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
•
•
•
•
Warranty and Support information card  
A plastic cradle to hold the WN111  
Velcro fasteners to attach the WN111 to the plastic cradle  
USB adapter cable  
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the  
carton, including the original packing materials, in case you need to return the product for repair.  
WN111 Default Wireless Settings  
If this is a new wireless network installation, use the factory default settings to set up the network  
and verify wireless connectivity. If this is an addition to an existing wireless network, you will  
need to identify the wireless network and wireless security settings that are already defined.  
Your RangeMax Next WN111 Wireless USB 2.0 Adapter factory default basic settings are:  
•
Network Name Service Set Identification (SSID): Any (First available network)  
Note: In order for the RangeMax Next WN111 Wireless USB 2.0 Adapter to  
communicate with a wireless access point or wireless adapter, all devices must  
be set up to use the same wireless network name (SSID).  
•
•
Network Mode (Infrastructure or Ad-hoc): Infrastructure  
Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled  
Installation  
To install the RangeMax Next WN111 Wireless USB 2.0 Adapter:  
1. First, install the WN111 software:  
Insert the Resource CD. If the Welcome screen does not open, double click Autorun.exe on the  
CD.  
1-3  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
a. Click Install the Software.The Check for Updates screen displays:  
Figure 1-1  
b. If you are connected to the Internet, click Check for Updates. If not, you can choose to  
install from the CD.  
c. Follow the onscreen instructions for the InstallShield wizard and the NETGEAR Smart  
Wizard.  
•
•
For Windows XP, if a Windows logo testing message appears, click Continue  
Anyway.  
If a message that Windows Vista cannot verify the publisher of this driver appears,  
click Install this driver software anyway.  
d. When the Installation Complete message appears, click Next.  
2. Now, connect the wireless USB adapter.  
Figure 1-2  
1-4  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
a. Locate an available USB port on your PC.  
Note: If you do not have a USB 2.0 port on your PC, the throughput of the  
WN111 will be limited to the 14 Mbps of the USB 1.1 standard.  
b. Insert the wireless adapter in a USB port on your PC.  
— For best results, put the wireless adapter at least 4 feet (1 meter) from your router.  
— To use the USB cable, connect it to the wireless USB adapter and a USB port. See  
“Placing the USB Adapter Cradle” on page 1-11.  
c. For Windows XP computers, the Found New Hardware Wizard opens. Follow the wizard  
prompts.  
d. For Windows Vista, the wireless USB adapter is automatically added with the installed  
driver.  
3. Select the country where you will primarily use the USB adapter. Click Agree.  
Figure 1-3  
1-5  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
4. Use the Smart Wizard to set up your wireless USB adapter.  
Figure 1-4  
a. Windows 2000 users go to Step b. Windows XP or Vista users can set up the wireless  
adapter either with the NETGEAR Smart Wizard (recommended) or the Windows  
configuration utilities.  
•
NETGEAR Smart Wizard: Reveals more information about each network and makes it  
easier to troubleshoot network connection problems.  
•
Windows configuration utilities: See the Windows documentation or “Using Windows  
XP and Vista Wireless Configuration Utilities” at:  
http://documentation.netgear.com/reference/enu/winzerocfg/index.htm.  
b. Click Next to accept the NETGEAR Smart Wizard.  
c. You will be prompted to let the wizard help you connect to a network (recommended).  
Figure 1-5  
d. Click Next to accept.  
1-6  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
5. Depending on whether or not a wireless access point or router in the network supports Wi-Fi  
Protected Setup (WPS), there are two possibilities:  
— If a wireless access point or router in the network supports WPS, the following screen  
displays. Select Yes to connect to the access point or router through WPS, and click Next.  
Follow the Wizard.  
Figure 1-6  
Note: See “Using WPS to Connect to a Wireless Network” on page 2-4 for a  
detailed explanation of how to connect to an access point or router through  
WPS.  
— If none of the wireless access points or routers in the network support WPS, the following  
screen displays. Select the wireless network from the drop-down list, and click Next. The  
wizard records your choice. If the network uses security, then the Smart Wizard detects it.  
Follow the Wizard steps for Security (if used) and for saving a Profile.  
Hidden network  
Figure 1-7  
1-7  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Note: Hidden networks do not broadcast the Network Name (SSID). These  
networks are in the drop-down list, but the Network Name (SSID) is blank.  
Note: See “Manually Selecting a Wireless Network” on page 2-9 for a detailed  
explanation of how to connect to an access point or router through  
manually selecting a wireless network.  
6. After you have reviewed the settings, click Finish. The Settings screen displays:  
Figure 1-8  
The  
icon appears in the system tray and on the desktop. The wizard initiates your wireless  
connection, which could take up to a minute.  
7. Use the status bar to verify your wireless connectivity. See “Smart Wizard Status Bar”.  
1-8  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Connecting to Wireless Networks and the Internet  
Note: The maximum speed of a USB v2.0 port is 480 Mbps. If your computer has a USB  
v1.1 port, the WN111 is limited to that port’s maximum speed, which is 14 Mbps.  
The WN111 has indicators in three locations that show the status of your connection to a wireless  
network and to the Internet:  
•
•
•
WN111 Icon: After you install the WN111 software, the  
in the lower right of the Windows task bar. It is color coded to show the status of the  
connection.  
icon appears on the desktop and  
Smart Wizard Status Bar: Clicking on the system tray icon opens the Smart Wizard. The  
status bar at the bottom of the page shows details about your wireless and Internet connection.  
See “Smart Wizard Status Bar”.  
LED: The LED on the wireless USB adapter shows the network connection. Solid indicates a  
connection. The LED blinks when the wireless USB adapter is looking for a network  
association.  
WN111 Icon Colors  
The WN111 icon is on the desktop and in the Windows System Tray. The System Tray is on one  
end of the taskbar in the Microsoft Windows desktop.  
Color  
Condition  
Description  
Red  
The wireless USB adapter  
has no connection to any  
other wireless node.  
The wireless USB adapter cannot link to any other wireless  
node or the link is lost. Check your configuration or try moving  
to a location where the wireless signal quality is better.  
Yellow  
Green  
The wireless USB adapter  
has a connection with another spot, such as closer to the wireless access point. Also, look  
wireless node.  
The wireless link is weak. You might need to move to a better  
for possible interference such as a 2.4 GHz cordless phone or  
large metal surface.  
The wireless USB adapter  
The wireless USB adapter has established good  
has a connection with another communication with an access point and the signal quality is  
wireless node.  
strong.  
1-9  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Smart Wizard Status Bar  
Click the  
icon to open the Smart Wizard so you can view the status bar. The Smart Wizard  
Settings screen displays. The status bar is located at the bottom of the Settings page.  
Channel  
Security  
Throughput  
Signal  
strength  
Wireless  
network  
Join a Network  
Figure 1-9  
Connection status  
The following table describes how to interpret the Smart Wizard status bar  
Understanding the Status Bar  
Wireless network Identifies which wireless network you have joined.  
Security  
• Locked: security enabled.  
• Unlocked: security not enabled.  
Channel  
The wireless channel used by the network. If many wireless networks in your  
area use the same channel they can interfere with one another.  
Throughput  
• Wireless throughput measured in Mega bits per second. To optimize  
throughput, connect to a network with a high-speed router or access point, and  
a high-speed Internet connection. See Chapter 3, “Wireless Network  
Performance”.  
• If your computer has a USB v1.1 port, the WN111 is limited to that port’s  
maximum speed, which is 14 Mbps.  
Signal strength  
Join a Network  
More dots indicates a stronger signal. Usually, you will experience higher  
throughput when the signal is strongest.  
Click Join a Network to open the Connection Wizard.  
Connection  
status  
Identifies the status of your network connection.  
• Connected to Internet: Wireless Internet connection is OK.  
• Connected to Router: Wireless connection to the router is OK but the router  
is not connected to the Internet.  
• 169.254.x.x or ___.___.___.___ : The wireless connection to the router is OK  
but there is a problem with the router. See Chapter 4, “Troubleshooting”.  
The Connection status is useful in isolating a problem. For example, if you are connected to a  
router, but not to the Internet, then check the router’s Internet connection.  
1-10  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
If you right-click the system tray icon, you can disable the Internet notification feature by clearing  
the check mark enabling notification, as shown in the following figure. If you do so, then only the  
IP address is shown.  
Figure 1-10  
In Vista, there is one more option: Enable NETGEAR Smart Wizard.  
Figure 1-11  
If you clear the check mark for Enable NETGEAR Smart Wizard, the NETGEAR Smart Wizard  
will be disabled and you will need to setup the wireless adapter with Vista Auto configuration.  
WN111 LED  
The LED on the WN111 indicates the condition of wireless link  
LED  
Meaning  
Off  
• The WN111 in not plugged in to the PC.  
• Power save mode (default from power up  
or reset).  
Blink  
On  
Looking for network association.  
Associated or joined with network.  
Placing the USB Adapter Cradle  
You can attach the RangeMax Next WN111 Wireless USB 2.0 Adapter directly to a USB port on  
your computer, or use the USB cable to extend the range and obtain better wireless reception.  
Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided  
in the package for better USB Adapter placement on a notebook computer:  
1. The RangeMax Next WN111 Wireless USB 2.0 Adapter comes with three black fasteners.  
Locate the one with a prickly side and attach it to the plastic cradle on the middle of the  
outside rear.  
1-11  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
2. Insert the RangeMax Next WN111 Wireless USB 2.0 Adapter in the plastic cradle.  
Figure 1-12  
3. Place one of the other pieces of loop and hook fastener on the back of your monitor near the  
top for better reception.  
Figure 1-13  
Note: The last piece of the fastener can be placed on the side of your PC monitor  
nearest your wireless access point, if you are using the USB Adapter with a  
desktop PC.  
Removing the WN111 Software  
You can remove the wireless adapter software in these two ways:  
•
Navigate the Windows Start menu to the RangeMax Next WN111 Wireless USB 2.0 Adapter  
program group, select the uninstall option, and follow the screen prompts.  
•
Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select  
the RangeMax Next WN111 Wireless USB 2.0 Adapter option, and follow the screen prompts.  
1-12  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Upgrading the WN111 Software  
Upgrades might be available at the NETGEAR website. To install an upgrade, follow these steps.  
1. Write down the settings for any profiles that you want to save. They will not be retained.  
2. Download the upgrade from the NETGEAR website Support page.  
3. Remove the WN111 software from your computer.  
4. Remove the WN111 adapter from your computer, and if prompted restart your laptop  
computer.  
5. Run the installer that you downloaded (the file ends in .exe).  
6. Follow the installer instructions, and if prompted, then restart your computer.  
1-13  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
1-14  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
Network Connections and Wireless Security  
This chapter explains how to use your Wireless USB 2.0 Adapter to connect to your Wireless  
Local Area Network (WLAN) and how to set up wireless security for the Wireless USB 2.0  
Adapter so that it matches the wireless security settings for your network.  
If you chose the Windows XP or Windows Vista Zero Configuration utility during installation, and  
now you want to use the Smart Wizard, then you need to disable the Windows utility. If you are  
working with the Vista configuration utility, see the online document:  
http://documentation.netgear.com/reference/enu/winzerocfg/index.htm  
Disabling the Windows Zero Configuration Utility  
To disable the Windows Zero Configuration utility:  
1. Attach the wireless adapter to a USB port for your computer.  
2. Go to Windows Start menu and select Network Connections.  
3. On the Network connections page, select the Wireless Network Connection and right-click to  
choose the Properties option.  
Figure 2-1  
4. Click the Wireless Networks tab. Then clear the “Use Windows to configure my wireless  
settings” check box.  
2-1  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Understanding the Smart Wizard  
These instructions explain how to use the NETGEAR WN111 Smart Wizard to change the  
RangeMax Next WN111 Wireless USB 2.0 Adapter wireless settings.  
When you have installed the software from the Resource CD, the  
icon appears on your  
desktop and in the Windows System Tray. The Windows System Tray is located on the Windows  
taskbar. You can either double-click this icon on the desktop, or click it in the System Tray at any  
time, to use the Smart Wizard. This software automatically restarts when you reboot your  
computer.  
The Smart Wizard provides a complete and easy to use set of tools to:  
•
•
•
•
•
•
View details about wireless networks in your area.  
Connect securely to an access point or router through Wi-Fi Protected Setup (WPS)  
Choose the network that you want to use.  
Configure wireless settings for your wireless USB adapter  
Save your wireless network settings in profiles.  
Remove or reinstall the wireless adapter software.  
The following sections in this chapter explain how to use the Smart Wizard.  
Viewing Wireless Networks in Your Area  
You can use the Networks tab to view all available wireless networks in your area. You can also  
scan to search for wireless networks and refresh the page.  
To view information about wireless networks:  
1. Use the  
icon to open the Smart Wizard.  
2-2  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
2. Click the Networks tab. The Networks screen displays:  
You can click a column  
heading to sort.  
If many networks use  
the same channel they  
can interfere with each  
other.  
The Status bar shows  
your network connection  
and Internet connection.  
Figure 2-2  
The buttons located at the bottom of the Networks tab are:  
•
Help. Displays utility help contents.  
•
•
•
•
Join a Network. View networks and join a network. See “Joining a Network” on page 2-4.  
Connect. Connect to the network that you selected.  
Scan. Check for wireless networks. Clicking Scan refreshes the page.  
Close. Close the window of the Wizard.  
The screen shows the following information for each network scanned:  
•
Network Name (SSID). The name assigned to a wireless network. This is the same as the  
SSID or ESSID configuration parameter. Note that as a security measure, some wireless  
access points do not broadcast their SSID. In such cases, the SSID field will be blank even  
though the rest of the information will still be displayed.  
•
•
•
•
Channel. The channel determines which operating frequency will be used.  
N. The access point supports wireless N mode.  
WPS. The access point supports WPS.  
Security. Identifies whether the wireless network uses security settings such as WEP,  
WPA2-PSK, or WPA-PSK.  
•
Signal. Identifies the signal strength of the communications.  
2-3  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
•
•
MAC Address. Identifies the hardware address (MAC Address) of the wireless device  
broadcasting this information.  
Mode. Identifies the type of wireless network — Access Point (Infrastructure) or Computer-  
to-Computer (Ad Hoc)  
Joining a Network  
During the WN111 software installation, the Smart Wizard connects the WN111 to a wireless  
access point or router, or lists the available networks to let you select a network. After installation  
you can use the Join a Network button or the Networks tab at any time to either connect to another  
access point or router or to view the available networks and select one:  
•
If a wireless access point or router in the network supports Wi-Fi Protected Setup (WPS), see  
the “Using WPS to Connect to a Wireless Network” section on this page.  
•
If none of the wireless access points or routers in the network support WPS, or if you prefer to  
manually select a network, see the “Manually Selecting a Wireless Network” section on  
page 2-9.  
Using WPS to Connect to a Wireless Network  
The easiest way to connect securely to an access point or router is through WPS. If an access point  
or router in the wireless network that you try to connect to supports WPS, you can use WPS to set  
up the WN111 wireless settings and connect securely to the access point or router. (An access  
point or router that supports WPS has a WPS symbol.) WPS automatically configures the network  
name (SSID) and WPA security key for the access point or router and the WN111. Note that WPS  
is not a new security feature—it makes existing security features easier to configure.  
For an access point or router that supports WPS, there are two methods to enable WPS with a  
client such as the WN111:  
•
Push Button Configuration (PBC). To enable WPS, push an actual push button or push  
dome on the access point or router or a simulated push button in the software. This is a fairly  
new technology, so only some access points and routers provide a PBC.  
•
PIN entry. To enable WPS, enter in the Smart Wizard for the WN111 a Personal Identification  
number (PIN) that is associated with the access point or router.  
2-4  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Using a PCB to Connect to a Wireless Access Point or Router  
To join a network using a PCB:  
1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network.  
Figure 2-3  
Note: Instead of clicking Join a Network on the status bar, you can also click the  
Networks tab on the Smart Wizard Settings screen. Then, select a network.  
2. The following screen displays. Select Yes, and click Next.  
Figure 2-4  
2-5  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
3. The following screen displays. Select Yes (to use a push button), and click Next.  
Figure 2-5  
4. Open the Smart Wizard for the access point or router that you have selected.  
5. Select Add WPS Client from the menu of the Smart Wizard for the access point or router.  
6. On the Add WPS Client page, select Push Button.  
7. To start the WPS process, either physically press the Push Button on the access point or router,  
or press the Soft Push Button by clicking on the  
icon on the Add WPS Client page.  
8. Within 2 minutes of completing Step 7, return to the Smart Wizard page for the WN111, and  
click the  
icon. The Smart Wizard initiates your wireless connection.  
Figure 2-6  
9. You can use the Status Bar to verify your network connection. For more information, see  
“Smart Wizard Status Bar” on page 1-10. Click Close to exit the Smart Wizard.  
10. Close the Smart Wizard for the access point or router.  
2-6  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Using a PIN to Connect to a Wireless Access Point or Router  
To join a network using a PIN:  
1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network.  
Figure 2-7  
Note: Instead of clicking Join a Network on the status bar, you can also click the  
Networks tab on the Smart Wizard Settings screen. Then, select a network.  
2. The following screen displays. Select Yes, and click Next.  
Figure 2-8  
2-7  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
3. The following screen displays. Select No (to use a PIN), and click Next.  
Figure 2-9  
4. Generate a client security PIN for the WN111. Write down (or copy) the PIN.  
Figure 2-10  
5. Open the Smart Wizard for the access point or router that you have selected.  
6. Select Add WPS Client from the menu of the Smart Wizard for the access point or router.  
7. On the Add WPS Client page, select PIN.  
8. Within 4 minutes of completing Step 4, enter the PIN in the box for the ‘Client’s PIN’ on the  
Add WPS Client page, and click Next. The Smart Wizard initiates your wireless connection.  
9. You can use the Status Bar to verify your network connection. For more information, see  
“Smart Wizard Status Bar” on page 1-10. Click Close to exit the Smart Wizard.  
10. Close the Smart Wizard for the access point or router.  
2-8  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Manually Selecting a Wireless Network  
During the WN111 software installation, the Smart Wizard lists the available networks. After  
installation you can use the Join a Network button or the Networks tab at any time to view the  
available networks and select the one that you want to use.  
Note: Make sure that you know the security settings for the network that you want to use.  
For example, if WEP is used then you need to know the WEP key. If you use  
secure networks frequently, set up profiles for each network with the wireless  
network and security settings.  
Depending on whether or not a wireless access point or router in the network supports Wi-Fi  
Protected Setup (WPS), the Smart Wizard presents different screens to manually configure a  
network.  
Manually Selecting a Wireless Network in a WPS Configuration  
To manually join a network in which a wireless access point or router supports WPS:  
1. Use the  
icon to open the Smart Wizard. On the status bar, click Join a Network.  
Figure 2-11  
Note: Instead of clicking Join a Network on the status bar, you can also click the  
Networks tab on the Smart Wizard Settings screen. Then, select a network.  
2-9  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
2. The following screen displays. Select No, and click Next.  
Figure 2-12  
3. Select a network from the drop-down list. If you select a hidden network then you must enter  
the SSID. Click Next.  
Figure 2-13  
4. Follow the steps of the wizard to specify the wireless security if used, and to create a profile.  
5. Review you settings, and click Finish.  
6. You can use the Status Bar to verify your network connection. For more information, see  
“Smart Wizard Status Bar” on page 1-10. Click Close to exit the Smart Wizard.  
2-10  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Manually Selecting a Wireless Network in a Configuration without WPS  
To manually join a network in which none of the wireless access points or routers support WPS:  
1. Use the  
icon to open the Smart Wizard. On the status bar, click Join a Network.  
Figure 2-14  
Note: Instead of clicking Join a Network on the status bar, you can also click the  
Networks tab on the Smart Wizard Settings screen. Then, select a network.  
2. Select a network from the drop-down list. If you select a hidden network then you must enter  
the SSID. Click Next.  
Figure 2-15  
3. Follow the steps of the wizard to specify the wireless security if used, and to create a profile.  
4. Review you settings, and click Finish.  
5. You can use the Status Bar to verify your network connection. For more information, see  
“Smart Wizard Status Bar” on page 1-10. Click Close to exit the Smart Wizard.  
2-11  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Profiles  
The WN111 Smart Wizard uses profiles to store all the settings for a particular wireless network.  
There are two special profile names: Default and Profile.  
•
Default. The Profile named Default automatically scans for any available network. You  
cannot change this profile name.  
•
Profile. If you do not enter a name in the Profile Name box, then the name Profile is used to  
save your settings. If you do this more than once then you will be asked if you want to replace  
the previous settings stored in Profile.  
Adding Profiles  
You can store multiple profiles and recall the one which matches the network you want to join.  
If you use your computer to connect to different wireless networks, you can create a profile for  
each wireless network. Then, you can easily load the profile that has all the settings that you need  
to join the network you are using at the time.  
There are two types of wireless network profiles that you can set up:  
•
Access Point (Infrastructure). Connect to an access point or router with the 802.11  
infrastructure mode.  
•
Computer-to-Computer (Ad Hoc). Connect directly to another computer with the 802.11 ad  
hoc mode.  
For more information on wireless network modes, see the wireless reference document at:  
http://documentation.netgear.com/reference/enu/wireless/index.htm.  
Setting up a Profile to Connect to an Access Point or Router  
Follow these instructions to set up the RangeMax Next WN111 Wireless USB 2.0 Adapter to  
connect to a wireless access point or router.  
2-12  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
1. Use the  
icon to open the Smart Wizard. The Settings screen displays.  
Figure 2-16  
2. Enter the network settings.  
a. In the Network Type section, make sure that Access Point (Infrastructure) is selected.  
b. In the Profile box, type the name of the profile.  
c. In the Network Name (SSID) field, select a network or enter the SSID.  
Note: You will not get a wireless network connection unless the network SSID  
matches exactly the SSID used by the access point.  
3. Save your settings in a Profile.  
a. Click Save Profile.  
All the configuration settings are saved in this profile.  
b. Click Apply and then click Close to exit, or Cancel to return to the previous settings.  
4. Verify wireless connectivity to your network.  
2-13  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Use a browser to connect to the Internet, or check for file and printer access on your  
network.You can check the status bar in the Smart Wizard for the current connection status.  
Note: If you cannot connect, see Chapter 4, “Troubleshooting”. For problems with  
accessing network resources, the Windows Client and File and Print Sharing  
software might not be installed and configured properly on your computers.See the  
link to “Internet Networking and TCP/IP Addressing:” in Appendix B.  
Setting up a Computer-to-Computer (Ad Hoc) Profile  
The Computer-to-Computer setting uses Ad Hoc mode. Ad Hoc mode is an 802.11 networking  
framework in which devices or computers communicate directly with each other, without the use  
of an access point. For example, this mode is used when two Windows computers are configured  
with file and print sharing enabled and you want to exchange files directly between them.  
Note: Ad Hoc mode will not work using DHCP settings. Ad Hoc mode requires either  
static IP addresses (such as 192.168.0.1) or the IPX protocol. For help setting up  
static IP addresses, see the PC Networking Tutorial on the Resource CD.  
To create an Ad Hoc mode profile:  
1. Use the  
icon to open the Smart Wizard. The Settings screen displays:  
Figure 2-17  
2-14  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
2. Enter the network settings.  
a. Select Computer-to-Computer (Ad Hoc) for the Network Type.  
b. Select or enter the Network Name (SSID) for the Ad Hoc network.  
c. In the Profile box, type the name of the profile.  
d. Click Apply.  
3. Save your settings in a Profile.  
a. Click Save Profile and all the configuration settings are saved in this profile.  
b. Click Apply.  
c. Click Close to exit the Smart Wizard, or Cancel to return to the previous settings.  
4. Configure the PC network settings.  
a. Configure each PC with either a static IP address or with the IPX protocol.  
b. Restart the PCs.  
5. Verify wireless connectivity between your peer devices with the Ping program:  
a. On the Windows taskbar click Start, and then click Run.  
Figure 2-18  
b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type  
ping -t 192.168.0.1 and then click OK.  
c. A continuous ping will be sent to the device with the 192.168.0.1 static IP address. The  
ping response should change to “reply.”  
Figure 2-19  
2-15  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
At this point the connection is established.  
Note: If you cannot connect, see “Removing the WN111 Software” in Chapter 1. For  
problems accessing network resources, the Windows Client and File and Print  
Sharing software might not be installed or configured properly on your computers.  
See the link to “Internet Networking and TCP/IP Addressing:” in Appendix B.  
Starting a Computer-to-Computer (Ad Hoc) Network Connection  
1. On the Settings tab page of the Smart Wizard, select or type the Network Name (SSID).  
2. Select the Computer-to-Computer (Ad Hoc) network type.  
3. Click Initiate Ad Hoc. The Ad Hoc Setting dialog box opens:  
Figure 2-20  
4. In the Start Ad Hoc field, choose the wireless standard (802.11b or 802.11g) for your Ad Hoc  
computer-to-computer network.  
5. In the Channel field, Automatic should work. If you notice interference problems with another  
nearby wireless device, select a channel that is not being used by any other wireless networks  
near your wireless adapter. Use the Networks tab to view the channels in use in your area.  
6. Click OK.  
Note: The channel number differs depending on the country. The connection speed  
automatically defaults to the highest speed.  
2-16  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Wireless Security  
Many networks use wireless security to encrypt wireless data communications. If you try to  
connect to a network with wireless security the Smart Wizard detects it. Before you can use that  
network you must set up the WN111 with exactly the same kind of wireless security settings. The  
main types of wireless security used for home networks are:  
•
•
•
•
Wired Equivalent Privacy (WEP)  
Wi-Fi Protected Access (WPA)  
Wi-Fi Protected Access Pre-Shared Key (WPA-PSK)  
Wi-Fi Protected Access 2 Pre-Shared Key (WPA2-PSK)  
For more information about wireless security, see the wireless reference document at:  
http://documentation.netgear.com/reference/enu/wireless/index.htm  
In addition to the wireless security features, networks should use LAN network security features  
such as requiring a user name and password to access the shared resources in the network.  
Using Wireless Security Features  
You can strengthen the security of your wireless connection by enabling Wired Equivalent Privacy  
(WEP) encryption of the wireless data communications. Or, you can use WPA-PSK (Wi-Fi  
Protected Access Pre-Shared Key) encryption. For more information about wireless security, see  
the Web link to “Wireless Communications:” in Appendix B.  
In addition to the WN111 wireless security features, you should also configure appropriate LAN  
network security features such as requiring a user name and password to access the shared  
resources in your network.  
Wireless Network Name (SSID) and Security Settings  
Print this form, fill in the configuration parameters and put it in a safe place for possible future  
reference. For an existing wireless network, the person who set up the network will be able to  
provide this information.  
2-17  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
•
Network Name (SSID): The Service Set Identification (SSID) identifies the wireless local  
area network. Any (First available network) is the default WN111 wireless network name  
(SSID). You might customize it using up to 32 alphanumeric characters. Write your  
customized wireless network name (SSID) on the line below.  
Note: The SSID in the wireless access point is the SSID you configure in the wireless  
USB adapter. For the access point and wireless nodes to communicate with  
each other, all must be configured with the same SSID.  
Wireless network name (SSID): ______________________________  
•
If WEP Authentication is Used.  
— WEP Encryption key size. Identify one: 64-bit or 128-bit. The encryption key size must  
match the wireless network settings.  
— Data Encryption (WEP) Keys. There are two methods for creating WEP data encryption  
keys. Whichever method you use, record the key values in the spaces below.  
•
Passphrase method. ______________________________ These characters are case  
sensitive. Enter a word or group of printable characters and click the Generate Keys  
button. Not all wireless devices support the passphrase method.  
•
Manual method. These values are not case sensitive. For 64-bit WEP, enter 10 hex  
digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits.  
Key 1: _____________________________ Key 2: _____________________________  
Key 3: _____________________________ Key 4: _____________________________  
If WPA2-PSK or WPA-PSK Authentication is Used.  
•
— Passphrase: ______________________________ These characters are case sensitive.  
Enter a word or group of printable characters. When you use WPA-PSK, the other devices  
in the network will not connect unless they are set to WPA-PSK as well and are configured  
with the correct Passphrase.  
Setting up WEP Encryption Security  
Follow these steps to configure WEP Encryption Security:  
1. Run the WN111 Smart Wizard.  
a. Make sure the WN111 software is installed and the WN111 is connected to the USB port  
in your computer.  
2-18  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
b. Use the  
icon to open the Smart Wizard. The Settings screen displays.  
Figure 2-21  
2. Configure the Security settings.  
a. In the Profile box, select the profile or type in a profile name.  
b. In the Network Name (SSID) field select the network, or enter the SSID.  
Note: You will not get a wireless network connection unless the network SSID  
matches exactly what is configured in the access point.  
c. In the Security section, select WEP.  
3. Select the WEP encryption strength you will use.  
•
•
64-bit WEP data encryption  
128-bit WEP data encryption  
Note: Larger encryption keys require more processing and might slow the  
communications response times.  
2-19  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
4. Select Create with Passphrase and enter the passphrase. The configuration utility will  
automatically generate the WEP keys.  
Note: The characters are case sensitive. Be sure to use the same passphrase for all the  
wireless devices in the network.  
If the passphrase method is not available in the other devices, you must manually enter the  
keys to match exactly what is in the access point and other 802.11b wireless devices.  
5. Save your settings in a Profile.  
a. Click the Save Profile button. All the configuration settings are saved in this profile.  
b. Click Apply.  
c. Click Close to exit the configuration utility.  
Setting up WPA-PSK Security  
Follow these steps to configure WPA-PSK Security:  
1. Run the WN111 Smart Wizard.  
a. Make sure the WN111 software is installed and the WN111 is fully inserted in a USB port  
in your computer.  
b. Use the  
icon to open the Smart Wizard. The Settings screen displays:  
Figure 2-22  
2-20  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
2. Configure the Security settings.  
a. In the Profile box, select the profile or type in a profile name.  
b. In the Network Name (SSID) field select the network, or enter the SSID.  
Note: You will not get a wireless network connection unless the network SSID  
matches exactly what is configured in the access point.  
c. In the Security section, select WPA-PSK [TKIP] and enter the passphrase. For more  
information about WPA-PSK, see the link to “Wireless Communications:” in Appendix B.  
3. Save your settings in a Profile.  
a. Click the Save Profile button. All the configuration settings are saved in this profile.  
b. Click Apply and then click Close to exit the Smart Wizard.  
Setting up WPA2-PSK Security  
Follow these steps to configure WPA2-PSK Security:  
1. Run the WN111 Smart Wizard.  
a. Make sure the WN111 software is installed and the WN111 is fully inserted in a USB port  
in your computer.  
b. Use the  
icon to open the Smart Wizard. The Settings screen displays:  
Figure 2-23  
2-21  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
2. Configure the Security settings.  
a. In the Profile box, select the profile or type in a profile name.  
b. In the Network Name (SSID) field select the network, or enter the SSID.  
Note: You will not get a wireless network connection unless the network SSID  
matches exactly what is configured in the access point.  
c. In the Security section, select WPA2-PSK [AES] and enter the passphrase. For more  
information about WPA2-PSK, see the link to “Wireless Communications:” in  
Appendix B.  
3. Save your settings in a Profile.  
a. Click the Save Profile button. All the configuration settings are saved in this profile.  
b. Click Apply and then click Close to exit the Smart Wizard.  
Statistics Tab  
The Statistics page provides real time and historical trend information on the data traffic and  
performance of your wireless adapter.  
Figure 2-24  
•
Transmit/Receive Performance (%). A real time graph identifying the total, receive, and  
transmit utilization as a percentage the total possible.  
2-22  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
•
•
•
Transmit, Receive, and Total (TxRx). Radio buttons let you select whether to display the  
transmit performance, the receive performance, or both in the same graph.  
Transmit Statistics. Identifies transmit megabits per second (Mbps), transmit packets per  
second (Tx Packets/s), total transmitted packets, and transmit errors.  
Receive Statistics. Identifies receive megabits per second (Mbps), receive packets per second  
(Rx Packets/s), total received packets, and reception errors.  
About Tab  
The About Tab displays the current version information.  
Figure 2-25  
The following information is displayed in the About screen:  
•
Regional Domain. This is the region setting for the wireless adapter. The approved channels  
for the region are automatically scanned. Governments regulate the channels used for wireless  
transmission. Operating the wireless adapter in a different region might violate local laws.  
•
•
•
Driver Version. The wireless adapter driver version.  
Hardware Version.  
Driver Date. The wireless adapter driver release date.  
2-23  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
•
MAC Address. The MAC address of the adapter. The Media Access Control address is a  
unique 48-bit hardware address assigned to every network interface card. Some wireless  
networks will restrict access based on a list of known MAC addresses. If you are  
communicating with such a network, you would have to provide the address shown here to the  
network administrator before you would be allowed to connect. Restricting access by MAC  
address adds an obstacle against unwanted access to your network. However, unless you use  
data encryption security, the data broadcast over the wireless link is fully exposed.  
•
•
IP Address. The IP address assigned to this adapter.  
Smart Wireless Utility. The version and release date of the Smart Wizard.  
Advanced Settings  
The default advanced settings usually work fine. To view or change the advanced settings, from  
the Settings tab, click Advanced Settings. The Advanced Settings screen displays:  
Figure 2-26  
2-24  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 3  
Wireless Network Performance  
This chapter explains how to use your RangeMax Next WN111 Wireless USB 2.0 Adapter to  
connect to your Wireless Local Area Network (WLAN) and how to set up wireless security for the  
wireless USB adapter so that it matches the wireless security settings for your network.  
Optimizing Wireless Performance  
The speed and operating distance or range of your wireless connection can vary significantly based  
on the location of the wireless router. You should choose a location for your router that will  
maximize the network speed.  
The following list describes how to optimize wireless router performance.  
•
•
•
Identify critical wireless links.  
If your network has several wireless devices, decide which wireless devices need the highest  
data rate, and locate the router near them. Many wireless products have automatic data-rate  
fallback, which allows increased distances without losing connectivity. This also means that  
devices that are further away might be slower. Therefore, the most critical links in your  
network are those where the traffic is high and the distances are great. Optimize those first.  
Choose placement carefully.  
For best results, place your router:  
— Near the center of the area in which your computers will operate.  
— In an elevated location such as a high shelf where the wirelessly connected computers  
have line-of-sight access (even if through walls).  
Avoid obstacles to wireless signals.  
— Keep wireless devices at least two feet from large metal fixtures such as file cabinets,  
refrigerators, pipes, metal ceilings, reinforced concrete, and metal partitions.  
— Keep away from large amounts of water such as fish tanks and water coolers.  
3-1  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
•
Reduce interference.  
Avoid windows unless communicating between buildings.  
Place wireless devices away from various electromagnetic noise sources, especially those in  
the 2400–2500 MHz frequency band. Common noise-creating sources are:  
— Computers and fax machines (no closer than one foot)  
— Copying machines, elevators, and cell phones (no closer than 6 feet)  
— Microwave ovens (no closer than 10 feet)  
Choose your settings.  
•
— Use a scanning utility to determine what other wireless networks are operating nearby, and  
choose an unused channel.  
— Turn off SSID Broadcast, and change the default SSID. Other nearby devices might  
automatically try to connect to your network several times a second, which can cause  
significant performance reduction.  
3-2  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Optimizing Your Network Bandwidth  
The speed of network connections depends on the type of equipment that you use. Try to use high-  
speed technologies for network connections with the heaviest traffic to avoid lower-speed  
bottlenecks in the path. The following figure shows a home network that includes many different  
connection speeds.  
Figure 3-1  
In the network shown in Figure 3-1, the two PCs with gigabit (1000 Mbps) Ethernet adapters have  
a gigabit connection through the router to the storage server. With a high-speed router this  
connection allows for extremely fast backups or quick access to large files on the server. The PC  
connected through a pair of Powerline HD adapters is limited to the 200 Mbps speed of the  
Powerline HD connection. Although any of the links in this example would be sufficient for high-  
traffic applications such as streaming HD video, the use of older devices such as 10 Mbps Ethernet  
or 802.11b wireless would create a significant bottleneck.  
In planning your network, think about which tasks will have the heaviest traffic flow between  
them. Examples are:  
3-3  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
•
•
A media center in one room streaming high-definition video from a server in another room  
A storage device that is used for backing up your computers  
Overview of Home and Small Office Networking  
Technologies  
Common connection types and their speed and security considerations are:  
•
Broadband Internet  
Your Internet connection speed is determined by your modem type, such as ADSL or cable  
modem, as well as the connection speed of the sites to which you connect, and general Internet  
traffic. ADSL and cable modem connections are asymmetrical, meaning they have a lower  
data rate to the Internet (upstream) than from the Internet (downstream). Keep in mind that  
when you connect to someone else who also has an asymmetrical connection, the data rate  
between your sites is limited by each side’s upstream data rate. A typical residential ADSL or  
cablemodem connection provides a downstream throughput of about one to three megabits per  
second (Mbps). Newer technologies such as ADSL2+ and Fiber to the Home (FTTH) will  
increase the connection speed to tens of Mbps.  
•
Wireless  
A high-speed wireless router can provide a wireless data throughput of up to 300 Mbps using  
technology called Multiple-Input Multiple-Output (MIMO), in which multiple antennas  
transmit multiple streams of data. The use of multiple antennas also provides excellent range  
and coverage. With the introduction of the newer WPA and WPA2 encryption and  
authentication protocols, wireless security is extremely strong.  
To get the best performance, use newer adapters such as RangeMax adapters for your  
computers. A high-speed router might be compatible with older 802.11b and 802.11g adapters,  
but the use of these older wireless technologies in your network can result in lower throughput  
overall (typically less than 10 Mbps for 802.11b and less than 40 Mbps for 802.11g). In  
addition, many older wireless products do not support the latest security protocols, WPA and  
WPA2.  
•
Powerline  
For connecting rooms or floors that are blocked by obstructions or are distant vertically,  
consider networking over your building’s AC wiring. NETGEAR’s Powerline HD family of  
products delivers up to 200 Mbps to any outlet, while the older generation XE family of  
products delivers 14 Mbps or 85 Mbps. Data transmissions are encrypted for security, and you  
can configure an individual network password to prevent neighbors from connecting.  
3-4  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
The Powerline HD family of products can coexist on the same network with older generation  
XE family products or HomePlug 1.0 products, but they are not interoperable with these  
older products.  
•
Wired Ethernet  
As Gigabit Ethernet ports become common on newer computers, wired Ethernet remains a  
good choice for speed, economy, and security. Gigabit Ethernet can extend up to 100 meters  
with twisted-pair wiring of CAT-5e or better. A wired connection is not susceptible to  
interference, and eavesdropping would require a physical connection to your network.  
Note: Actual data throughput will vary. Network conditions and environmental factors,  
including volume of network traffic, building materials and construction, and  
network overhead, can lower actual data throughput rate.  
Assessing Your Speed Requirements  
Because your Internet connection is likely to operate at a much lower speed than your local  
network, faster local networking technologies might not improve your Internet experience.  
However, many emerging home applications require high data rates. For example:  
•
Streaming HD video requires 10 to 30 Mbps per stream. Because latency and packet loss can  
disrupt your video, plan to provide at least twice the capacity you need.  
•
Streaming MP3 audio requires less than 1 Mbps per stream and does not strain most modern  
networks. Like video, however, streaming audio is also sensitive to latency and packet loss, so  
a congested network or a noisy link can cause problems.  
•
Backing up computers over the network has become popular due to the availability of  
inexpensive mass storage. Table 3-1 shows the time to transfer one gigabyte (1 GB) of data  
using various networking technologies.  
Table 3-1. Theoretical Transfer Time for 1 Gigabyte  
Network Connection  
Theoretical Raw Transfer Time  
Gigabit Wired Ethernet  
RangeMax NEXT Wireless-N  
Powerline HD  
8 seconds  
26 seconds  
40 seconds  
80 seconds  
150 seconds  
700 seconds  
800 seconds  
100 Mbps Wired Ethernet  
802.11g wireless  
802.11b wireless  
10 Mbps Wired Ethernet  
3-5  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Table 3-1. Theoretical Transfer Time for 1 Gigabyte  
Network Connection  
Theoretical Raw Transfer Time  
Cable Modem (3 Mbps)  
Analog Modem (56 kbps)  
2700 seconds  
144,000 seconds (40 hours)  
3-6  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
Troubleshooting  
This chapter provides information about troubleshooting your RangeMax Next WN111 Wireless  
USB 2.0 Adapter. For information about connecting to wireless networks and the Internet, see  
“Basic Setup” in Chapter 1.  
Troubleshooting Tips  
Use the following information to solve common problems you might encounter. Also, refer to the  
knowledge base on the NETGEAR website at http://www.netgear.com/support/main.asp.  
Table 4-1. Troubleshooting Tips  
Problem  
Action  
The LED is not lit  
The WN111 is not connected to the USB port properly or the  
WN111 software is not loaded.  
• Remove and reinsert the WN111.  
• Check the Windows device manager to see if the WN111 is  
recognized and enabled. Reload the WN111 software, if  
necessary.  
• Try to install the WN111 in a different USB slot on your  
system if one is available.  
The LED blinks but the WN111 is not  
connected to an access point.  
The WN111 is trying to connect to an access point, but cannot  
connect.  
• The access point might not be powered on.  
• Or, the access point and the WN111 are not configured with  
the same wireless parameters. Check the SSID and WEP  
settings.  
I cannot connect to an access point.  
The access point is available and there is  
good signal strength.  
• If the access point is WPA-PSK protected, you need the  
correct WPA-PSK passphrase. Otherwise, the WN111 will  
still be connected to the previous access point and you will  
not be able to change to the WPA-PSK access point.  
• If the access point is WEP protected (either 64 or 128 bit  
encryption), you will be prompted to enter the WEP  
encryption security information.  
4-1  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Table 4-1. Troubleshooting Tips (continued)  
Problem  
Action  
Throughput is only 54 Mbps or only 14  
Mbps.  
The RangeMax Next WN111 Wireless USB 2.0 Adapter can  
operate at faster speeds.  
• At 54 Mbps you are probably connecting to a standard  
802.11g network. See Chapter 3, “Wireless Network  
Performance”.  
• If you do not have a USB 2.0 port on your PC, the  
throughput is limited to the 14 Mbps of the USB 1.1  
standard.  
The Smart Wizard keeps asking me to save If you change the settings the Smart Wizard offers you the  
settings.  
chance to save the changes. To avoid this prompt, simply click  
Apply before you close the Smart Wizard.  
Two WN111 icons are in the system tray.  
You have an older software version installed on your system  
and it needs to be removed. See “Removing the WN111  
Software” in Chapter 1 or “Upgrading the WN111 Software” in  
Chapter 1.  
I can connect to the access point, but not  
the other computers on the network or to  
the Internet.  
This could be a physical layer problem or a network  
configuration problem.  
1. Check to make sure that the access point is physically  
connected to the Ethernet network.  
2. Make sure that the IP addresses and the Windows  
networking parameters are all configured correctly. See  
the link to “Internet Networking and TCP/IP Addressing:” in  
Chapter B.  
3. Restart the cable or DSL modem, router, access point, and  
computer.  
Viewing the IP address.  
To view the RangeMax Next WN111 Wireless USB 2.0  
Adapter IP address, click the WN111 icon to open the Smart  
Wizard. Then check the IP address in the About page.  
No IP address is assigned to the RangeMax This might occur if you upgraded your RangeMax Next  
Next WN111 Wireless USB 2.0 Adapter.  
WN111 Wireless USB 2.0 Adapter software and did not reboot  
your system.  
• Either restart your computer, or connect to a different access  
point.  
• It does not usually help to shut down the Smart Wizard or  
disable/enable the card.  
4-2  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Ad Hoc Mode Is Not Working Correctly  
You must click the Initiate Ad Hoc button before you click Apply. Here is how you start an Ad  
Hoc network:  
1. Fill in the Network Name (SSID).  
2. Select the Computer-to-Computer (Ad Hoc) Network Type.  
3. Click Initiate Ad Hoc.  
4. Accept the default settings or make your changes and click OK  
5. Click Apply.  
Note: Be sure all computers in your Ad Hoc network are configured with static IP  
addresses in the same subnet.  
Windows XP Occasional Connection Problems  
Windows XP users who apply Windows XP Hotfix (SP2) Q815485 from the Windows XP Update  
Service might not be able to connect to the Internet, might have dropped wireless connections, or  
both when using the RangeMax Next WN111 Wireless USB 2.0 Adapter. You can delete this  
Hotfix from the Add or Remove Program utility in the Control Panel.  
To delete Windows XP Hotfix (SP2) Q815485:  
1. Click Start, point to Control Panel, and then double click Add/Remove Programs.  
2. Click Windows XP Hotfix (SP2) Q815485, and then click Remove.  
•
You might receive an error message that states that some program on the computer might  
not work correctly if the update is removed.  
•
You can ignore this error message, and then click Yes to remove the update.  
3. Restart your computer and rerun the Smart Display Setup Wizard.  
This should solve your connection issue. You can restore this hotfix by following the link below:  
http://microsoft.com/downloads/details.aspx?FamilyId=009D8425-CE2B-47A4-ABEC-  
274845DC9E91&displaylang=en  
4-3  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
4-4  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A  
Technical Specifications and Factory Default  
Settings  
Technical Specifications  
The following table provides technical specifications for the Wireless USB 2.0 Adapter.  
Antenna  
1 Integrated internal antenna  
802.11n, 802.11g, or 802.11b  
Standards  
Radio Data Rate  
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, 08, 140, 246, and 300 Mbps  
(Auto Rate Sensing)  
Frequency  
2.4GHz to 2.5GHz CCK and OFDM Modulation)  
5V Bus powered  
Power  
Emissions  
FCC, CE  
Bus interface  
Provided drivers  
Operating Environment  
Encryption  
USB 2.0  
Microsoft Vista, Windows XP, and Windows 2000  
Operating temperature: 0 to 45 degree C  
40-bit (also called 64-bit) and 128-bit WEP data encryption, and WPA-PSK  
Limited 1-year warranty  
Warranty  
A-1  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
Factory Default Settings  
The following table lists the default settings of your Wireless USB 2.0 Adapter.  
Feature  
Description  
Smart Wizard  
Wireless  
Enabled  
Wireless Communication  
Enabled  
Wireless Network Name (SSID)  
Security  
Any (will connect to first wireless network that responds)  
Disabled  
Network Type  
Infrastructure  
Transmission Speed  
Country/Region  
Operating Mode  
Data Rate  
Autoa  
United States (varies by region)  
802.11n, 802.11g, 802.11b  
Up to 300 Mbps  
a. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions  
and environmental factors, including volume of network traffic, building materials and construction, and  
network overhead, lower actual data throughput rate.  
A-2  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix B  
Related Documents  
This appendix provides links to reference documents you can use to gain a more complete  
understanding of the technologies used in your NETGEAR product.  
Document  
Link  
Windows XP and Vista  
Wireless Configuration  
Utilities  
http://documentation.netgear.com/reference/enu/winzerocfg/  
index.htm  
Internet Networking and  
TCP/IP Addressing:  
http://documentation.netgear.com/reference/enu/tcpip/index.htm  
Wireless Communications:  
http://documentation.netgear.com/reference/enu/wireless/index.htm  
http://documentation.netgear.com/reference/enu/wsdhcp/index.htm  
Preparing a Computer for  
Network Access:  
Virtual Private Networking  
(VPN):  
http://documentation.netgear.com/reference/enu/vpn/index.htm  
http://documentation.netgear.com/reference/enu/glossary/index.htm  
Glossary:  
B-1  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual  
B-2  
v1.0, December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Indoor Fireplace LSM40MP 2 User Manual
Murphy Switch TDX6 User Manual
Nikon Camcorder COOLPIX 700 User Manual
NorthStar Navigation Car Speaker 961X User Manual
Nostalgia Electrics Fondue Maker CFF990 User Manual
Omega Engineering Water Pump FPUHP User Manual
Optoma Technology Projector EP723 User Manual
Optoma Technology Projector EP1691 User Manual
Panasonic Camera Accessories CF VZS251A User Manual
Panasonic Patio Furniture EP1285 User Manual