Download from Www.Somanuals.com. All Manuals Search And Download.
Verify Package Contents
Unpack the contents of the package and make sure that you have everything.
Model FA310TX
Network Card
Drivers and
Diagnostics Disk
Category 5
10/100 Mbps UTP cable
(provided with
Installation
guide
Model FA310TXC
Network Card)
9014FA
Verify PC Requirements
The instructions given in this guide are for using the NETGEAR™ Model
®
FA310TX Network Card in a PC that has a Microsoft Windows 95 operating
system.
You must have a PC with a PCI expansion slot that has bus mastering capability.
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Network Card
Note: Touch a grounded metal object to free yourself of static
electricity before you handle the network card.
1. Turn the power off and unplug the power cord from your computer.
2. Remove the PC cover.
3. Choose an available PCI slot (PCI slots are the shorter slots) and
remove the corresponding back plate from the PC chassis.
4. Insert the network card into the PCI expansion slot.
Note: To avoid damaging any components on the network card,
handle it by the edges, using your thumbs to push it securely into the
PCI slot. Make sure the network card is fully inserted into the slot to
prevent the PC operating system from freezing at startup.
5. Fasten the network card to the rear of the computer chassis by
tightening the screw that is on the PC.
6. Replace the PC cover and reconnect the power cord to the PC.
Network card
Back plate
removed
7983FB
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the Network Cables
Using the appropriate UTP cable, connect any port on a network hub to the port
on the network card.
Note: One of the ports on NETGEAR hubs is switchable between
Normal (MDI-X) and Uplink (MDI) with a Normal/Uplink push
button. If you are using this switchable port on a NETGEAR hub to
connect to a PC or the network card, make sure the Normal/Uplink
push button is set to Normal.
PC with network
card installed
Power adapter
PC with network
card installed
Printer
(optional)
Hub
RJ-45
connector
RJ-45
connector
Category 5 10/100 Mbps UTP cables*
*Use the cables provided or any Category 5 UTP cable.
Maximum length = 100 meters (300 feet)
7995FB
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Windows 95 Network Driver
This guide provides instructions for installing the Windows 95 Network Driver.
All versions of Windows 95 might not respond with the same screens.
Therefore, windows that are different from those shown in these instructions
might open but prompt you for the same information, and windows might open
in a different order than the order of the steps in these instructions.
Note: You must install the network card (instructions on other side of
this guide) before installing the network driver.
You need to have the Windows 95 CD-ROM and the FA310TX Drivers and
Diagnostics Disk ready to use in the installation process.
If you have not yet named your PC and your network, before you proceed with
the installation steps, decide on a name for your network and for each PC. When
the “Network” window opens, it prompts you to “... provide computer and
workgroup names....” Click on “OK.” The second “Network” window opens
and prompts you for the names. Enter a name (a different one-word name for
each computer) in the “Computer name” entry field; enter a workgroup
name (the name of your entire network) in the “Workgroup” entry field.
Click on “OK” or “Close.”
Note: If the “Insert Disk” window opens and the “Please insert the
disk labeled Windows 95...” message appears at any time during the
installation process, insert the Windows 95 CD-ROM in Drive D (the
CD-ROM drive) and click on “OK.” Then follow the next step in the
instructions.
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Turn on the power to the computer and start Windows 95.
The new hardware is found, and the driver is automatically loaded.
2.
New Hardware Found
PCI Ethernet Controller
Select which driver you want to install for your new hardware:
Windows default driver
Driver from disk provided by hardware manufacturer
Do not install a driver (Windows will not prompt you again)
Select from a list of alternate dirvers
OK
Cancel
Help
Select “Driver from disk provided by hardware manufacturer,” and
then click on “OK.”
If a different “New Hardware Found” window opens that prompts you to
click on “Next,” doing so opens the “Update Device Driver Wizard”
window in step 3.
3.
Update Device Driver Wizard
This wizard will complete the installation of:
PCI Ethernet Controller
by searching your local drives, network, and Internet
locations for the most current driver.
If you have a disk or CD-ROM that came with this device,
insert it now.
It is recommended that you let Windows search for an
updated driver. To do this, click Next to continue.
< Back
Next>
Cancel
Insert the FA310TX Drivers and Diagnostics Disk in Drive A, and then
click on “Next.”
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Update Device Driver Wizard
Windows found the following updated driver for this
device:
NETGEAR FA310TX Fast Ethernet PCI Adapter
If you want to use this driver, click Finish. If this is not the
correct driver and you want to search for a different driver
manually, click Other Locations.
Location of Driver
Other Locations...
< Back
Finish
Cancel
Click on “Finish.”
5.
Copying Files...
OK
The file NDIS2DOS\NGRPCI.dos on Windows 95 CD-ROM
could not be found.
Cancel
Insert Windows 95 CD-ROM into the drive
selected below, and click OK.
Skip File
Details...
Copy files from:
A:\
Type A:\ in the “Copy files from” entry field and click on “OK.”
6.
Remove the Drivers and Diagnostics Disk from the floppy drive, remove
the Windows 95 CD-ROM from the CD drive (if you have inserted it),
and then click on “Yes.”
Restarting your system is necessary to enable your PC to finish setting
up your new hardware.
7. Proceed to “Verify Installation.”
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Verify Installation
1.
Double-click on “My Computer” on the desktop, double-click on
“Control Panel,” and then double-click on “System.”
2.
Click on “Device Manager.”
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Double-click on “Network adapters.”
4.
If there is a problem with the installation of the driver, an exclamation
point appears next to “NETGEAR FA310TX Fast Ethernet PCI
Adapter.” If there is an exclamation point, double-click on “NETGEAR
FA310TX Fast Ethernet PCI Adapter.” The “Properties” window
opens, and a message regarding the status of the device is displayed in
the window. Continue to click on “OK” or click on the “X” in the right
hand corner to close any open windows and return to the Windows 95
desktop.
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Model FA310TX Network Card
IEEE 802.3u, 100BASE-TX Fast Ethernet
IEEE 802.3i, 10BASE-T Ethernet
NetWare tested and approved
Microsoft Windows, Windows 95, Windows NT
compatible
Standards Compatibility
®
PCI Plug-and-Play compatible
+5V +/- 5% @ 630 mA maximum
DC operating voltage
Physical Specifications
Dimensions
5.125 x 2.813 in.
13.02 x 7.15 cm
Weight
.20 lb (90 g)
Environmental Specifications
Operating temperature
Operating humidity
0 to 40 C
10% to 90% noncondensing
CE mark, commercial
Agency Compliance
FCC, Part 15, Class B
EN 55 022 (CISPR 22), Class B
Canada ICES-003, Class B
RJ-45 connector for 10BASE-T or 100BASE-T Ethernet
interface
Interface Options
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Warranty Information
Thank you for selecting NETGEAR products.
Subject to the provisions described below, this NETGEAR product is protected
by a limited lifetime warranty from defects in material and workmanship.
Should a product fail to perform as described above within the first year
following the original date of purchase, NETGEAR will ship a replacement for
the failed product upon return of the defective product.
Products that fail after the first year following the original date of purchase will
be repaired or replaced with the same or functionally equivalent, product by
NETGEAR, at its discretion, free of charge provided you (1) have, within 30
days of the original date of purchase, completed and returned the Owner
Registration Cards which accompanied the products when shipped, (2) return
the failed product to NETGEAR designated repair facility with shipping charge
prepaid, and (3) provide NETGEAR with proof of the original date of purchase.
Repaired or replacement products will be returned to you with shipping charges
prepaid.
Replacement products may be refurbished or contain refurbished materials. If
NETGEAR, by its sole determination, is unable to repair or replace the defective
product, it will refund the depreciated purchase price of the product.
This warranty does not apply if, in the judgement of NETGEAR, the product
fails due to damage from shipment, handling, storage, accident, abuse or misuse,
or if it has been used or maintained in a manner not conforming to product
manual instructions, has been modified in any way, or has had any serial number
removed or defaced. Repair by anyone other than NETGEAR or an approved
agent will void this warranty. The maximum liability of NETGEAR under this
warranty is limited to the purchase price of the product covered by the warranty.
Prior to returning any defective product, the end customer or the reseller from
whom the end customer originally purchased the product must obtain a Return
Materials Authorization (RMA) number from NETGEAR. All defective
products should be returned to NETGEAR with shipping charges prepaid.
NETGEAR will not accept collect shipments.
EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT OR AS
REQUIRED BY LAW, THE WARRANTIES AND REMEDIES STATED
ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, ORAL OR
WRITTEN, EXPRESS OR IMPLIED. ANY AND ALL OTHER
WARRANTIES,
INCLUDING
IMPLIED
WARRANTIES
OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS ARE EXPRESSLY
EXCLUDED. NETGEAR SHALL NOT UNDER ANY CIRCUMSTANCES
BE LIABLE TO ANY PERSON FOR ANY SPECIAL, INCIDENTAL,
INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT
LIMITATION, DAMAGES RESULTING FROM USE OR MALFUNCTION
OF THE PRODUCTS, LOSS OF PROFITS OR REVENUES OR COSTS OF
REPLACEMENT GOODS, EVEN IF NETGEAR IS INFORMED IN
ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES.
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT!
Please register online. YOU MUST REGISTER TO OBTAIN TECHNICAL
SUPPORT.
PLEASE RETAIN PROOF OF PURCHASE and this warranty information.
To get product support, or to obtain product information and NETGEAR
product documentation, direct your Web browser to the Web page at:
To register online, direct your Web browser to the Web page at:
If you do not have access to the World Wide Web, you can print a registration
card and mail it to NETGEAR customer service. The card is included on your
Drivers and Diagnostics disk as a Microsoft Word document file called filename.
Download the file, print the form, and fill in the information. Then mail the
completed form to:
NETGEAR, Inc.
P.O. Box 58185
Santa Clara, CA 95052-9916
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
NETGEAR, Inc.
A Bay Networks Company
4401 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 888-NETGEAR
Support Information
Defective or Damaged Merchandise
Defective or damaged merchandise can be returned to your point-of-purchase
representative.
Internet/World Wide Web
To get product support, to register your product online, or to obtain product information
and NETGEAR product documentation, direct your Web browser to:
Customer Support
You can contact Customer Support at the following toll free numbers:
Australia: 1800-142-046
Austria: 0800-06384327
(008000-NETGEAR)
Korea: 00308-11-0319
New Zealand: 0800-444-626
Sweden: 020-790086
Canada: 888-NETGEAR
France: 0800-90-2078
Germany: 00800-06384327
(008000-NETGEAR)
Switzerland: 00800-06384327
(008000-NETGEAR)
United Kingdom: 0171-571-5120
United States: 888-NETGEAR
Japan: 0120-66-5402
*M-FA3105XNA-3*
Model FA310TX Network Card Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
|