Wall Mount Unit
NP01WK/NP01WK1
Installation and Adjustment Manual
English
Deutsch
Français
Italano
Español
Português
Русский
Türkçe
Polski
中文
한글
日本語
Printed in Croatia
© NEC Display Solutions, Ltd. 2010
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mount Unit
NP01WK/NP01WK1 Installation and Adjustment Manual
Thank you for your purchase of this NEC wall mount unit.
Please read this installation and adjustment manual carefully to ensure proper use.
The Wall Mount Unit NP01WK/NP01WK1 is exclusively for Projector U300X/U250X/
U310W/U260W and cannot be used for other projectors.
Special skills are required to install the projector. This work
should never be performed by the customer.
To the Dealer and Installer
To ensure customer safety, we ask that the installation work
be started after careful attention is paid to the strength of the
mounting location to ensure it will withstand the weight of the
projector and mounting hardware.
CONTENTS
Please heed the following ...................................................ENG-2
Preparation.........................................................................ENG-4
Packaged Parts ........................................................ENG-4
Names of Parts.........................................................ENG-5
Dimensions of Parts..................................................ENG-6
Mounting the Projector .......................................................ENG-7
Adjusting the Projection Position.......................................ENG-12
Specifications...................................................................ENG-16
Using the wall plate ..........................................................ENG-16
ENG-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Please heed the following
Symbol
In this “Installation and Adjustment Manual”, to ensure the safe and proper use of the product,
prevent harm to yourself and others and damage to property, various symbols are used. The
symbols and meanings are as follows. Please read this manual after ensuring the contents are well
understood.
Improper handling and ignoring this indication may result in
Warning
bodily harm such as death, serious injury and so on.
Improper handling and ignoring this indication may result in
bodily injury and damage to surrounding contents.
Caution
Examples of symbols:
Symbol alerts you to cautions (including warnings)
Concrete cautions are specified in figures.
Symbol expresses prohibited actions
Concrete prohibitions are specified in figures.
Symbol expresses compulsory actions.
Concrete instructions are specified in figures.
Warning
• When installing the projector and adjusting the projection position, be sure to do so
as explained in this manual. The projector may fall and cause injury if installed and ad-
justed improperly.
• To prevent the projector from falling, install it in a location and fasten it so as to ensure
sufficient strength to support the combined weight (about 12.7kg) of the projector (about
6.5kg), the wall mount unit (about 6.2kg) and so on for an extended period as well as
to withstand earthquakes. Insufficient strength or fastening may result in the projector
falling and causing injury.
Be sure to observe the following precautions:
* Use M6 (1/4 inch) for the wall fixation bolts and screws for the wall adapter.
* Use an outlet for the power source of the projector. Do not directly connect to the
lamp line because this is dangerous.Also, use an accessible outlet so that you can
connect and disconnect the power plug.
• Mounting on a wooden wall
Ensure the load is mounted on a pillar or robust constructional material. If the strength
of the constructional material and so on is insufficient, please reinforce it. Do not mount
on wall finishing material, furring strip and so on.
• Mounting on a concrete wall
Use a commercial anchor bolt M6 (1/4 inch), anchor nuts and similar, which will bear
the load of the projector.
ENG-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
• Do not install in places subject to constant vibration. Extended vibration may cause
loosening of the screws and result in the Wall Mount Unit and projector falling and
causing injury. Also, it may cause breakdown of the projector.
• To ensure safety, be sure to tighten the bolts, screws and adjusting knobs securely.
Failure to do so may result in the projector falling and causing injury.
• Do not modify any parts. Doing so may result in the projector and the Wall Mount Unit
falling and causing injury.
• Do not use broken parts. Doing so may result in the projector and the Wall Mount Unit
falling and causing injury. If a part should break, consult your dealer.
• Do not look into the mirror when the projector is turned on. Doing so could damage
your eyesight.
• Do not hang from the projector and the Wall Mount Unit. Doing so may result in the
projector and the Wall Mount Unit falling and causing injury. Be especially careful of
children.
• Do not use adhesive for the locking screws, lubricant agent, oil and so on for the wall
adapter. Doing so may cause the material of the wall adapter to deteriorate and result
in the projector falling and causing injury.
Caution
• Do not obstruct the projector’s ventilation holes. Doing so will prevent the dissipation
of heat and may result in fire. In particular, do not use the projector in the following
ways:
installing the projector in a place such as wall and so on where ventilation is poor,
covering it, etc.
• Do not install the projector in front of the outlets of an air conditioner or heater or in a
place exposed to significant vibrations. Doing so may result in fires and electric shock.
• Do not install the projector in humid or dusty places or those exposed to greasy
smoke or steam (such as near cooking equipment or humidifiers). Doing so may result
in fires.
• When installing the projector, leave sufficient space between it and surrounding
objects. Failure to do so will prevent the dissipation of heat and may result in fires.
Please:
• Avoid rooms with significant dust, humidity, greasy smoke, or tobacco smoke.
Dirt will adhere to the optical parts such as mirrors, which will cause image quality to
deteriorate.
• Avoid places in which the screen is exposed to direct sunlight or illuminated light.
When surrounding light directly hits the screen, the image appears washed out and is difficult to
view.
• Avoid locations exposed to particularly high or low temperatures.
Doing so may result in breakdown. (For the ambient operating temperature, see the user’s
manual included with the projector.)
ENG-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Packaged Parts
Please check the packaged items.
Cover (A, B):2 pairs
Wall adapter:1
Plate (A)
Arm:1
Arm cover:1
Plate (B):1
M4 screws:4
M3.5 screws:2
Hex wrench:1
Projector adapter:1
Installation and Adjustment
Manual:1
Wall plate:1 *1
M5 screws:4 *2
*1, *2:To be used when mounting the wall adapter in the North America region.
ENG-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of Parts
Arm cover
Elongate hole for screw (or bolt)
(4 parts)
Covers (A, B)
•
•
Plate (A)
•
Arm fixation screw
Grooves for wiring
Arm
•
•
Tilt adjust knobs (4 parts)
•
•
•
•
•
Central axis
•
•
Wall adapter
•
•
•
•
•
•
Cover (B, A)
•
•
Projector
adapter
Plate (B)
Horizontal fixation nut
Projector fixation
plate
•
Horizontal adjust screws
•
Vertical adjust/
Arm fixation knobs
ENG-5
Download from Www.Somanuals.com. All Manuals Search And Download.
(unit: mm)
Dimensions of Parts:
The dimensions of the positions of the wall fixation screws (bolts) of the wall adapter are
described.
Central axis
The center of the wall adapter
(central axis)
533 (minimum) -733 (maximum)
120
320
Projector posterior surface
142
100
100
Projector bottom surface
(including the feet)
100
100
142
ENG-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the Projector
Preparations
1. Determine the installation location of the screen, and accordingly decide the
installation position of the wall mount unit.
Refer to the section "Installation" in the user’s manual included with the projector for more
information.
• Installation for slanted projection is not possible. Determine the position for front projection.
2. Make sure that all conditions described in the section "Heed the Following"
on page ENG-2 of this manual are met.
• Because the U300X/U250X/U310W/U260W have a large optical axis elevation angle, a
slight shift in projection distance will have a large effect on the screen size and position. If
the projector angle is off, image distortion will increase.
1. Attach the projector adapter to the projector.
Remove the projector from its box and take off the plastic wrap.
a
b
Reattach the foam packing spacers to the projector and then turn the projector over.
Note: There are four screw holes on the bottom of the projector marked "MAX.M4x10". This
indication does not apply to the project adapter of this product.
(Note)
b
ENG-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Align the projector adapter with the holes on the bottom of the projector and securely attach
the adapter with the four supplied screws (M4x20).
Loosen the vertical adjust/arm fixation knobs of the projector adapter.
c
d
Do not try to attach the projector adapter without the foam packing spacers in
place. Otherwise the mirror section may be subject to excessive force, which can
lead to a shift in the projected image and cause serious damage.
Caution
c
d
Vertical adjust/arm fixation knobs
Warning
If screws other than the supplied ones
are used, the projector may be seriously
damaged, or the projector may fall and
cause injury. Be sure to use only the
supplied screws.
2. Attach the wall adapter to the structural material of the wall.
To ensure a projected image without distortion, the center of the wall adapter and the center of
the screen should be aligned on a straight axis.
• The wall adapter has a top/bottom orientation. Be sure to attach it with correct orientation.
If the wall adapter is mounted with reversed top/bottom orientation, correct
installation is not possible.
Caution
• The wall adapter can be adjusted horizontally over a range of ±50mm.
Side with cutouts facing up
Side without cutouts facing down
Warning
Use only M6 (1/4 inch) screws or bolts (4 locations) to fix the wall adapter. If screws
or bolts other than M6 are used, the projector may fall and cause injury.
ENG-8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Attach the arm to the wall adapter.
Loosen the arm fixation screws (top and bottom) with the supplied hex wrench.
Insert the arm plate (A) into the wall adapter from the top and tighten the screws (top and
bottom) near the center of the elongated hole.
a
b
* The covers (A) and (B) are to be attached after installation and adjustment are completed.
a
b
Plate(A)
4. Mount the projector assembled in step 1 on the arm.
To do this, first remove the packing spacers from the projector. Then hold the
Caution
projector body with the help of a second person and insert it carefully into the arm.
Do not hold the projector by the cable cover or the mirror section, and do not touch
the mirror or lens.
Insert the central axis of the projector adapter into the arm.
a
a
Cable cover
Mirror section
ENG-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the two supplied M5.5x9.5 screws to securely attach the supplied plate (B) to the arm.
Remove the cable cover of the projector.
b
c
Plate (B)
Warning
If plate (B) is not installed, the
projector may slide out of the
arm and fall off, which may
cause injury.
b
c
ENG-10
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Cabling
The power cord and signal cables can be passed through the grooves for wiring on the left
a
and right side of the arm. This should be done before attaching the arm cover.
Take care not to squeeze the cables with the horizontal adjust screws.
This concludes the projector installation.
ENG-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projection Position
Preparations
Before adjusting
• Project an image from the projector, then first use the focus lever of the projector to roughly
adjust the focus of the projected image.
For information on how to project an image, see “Installation” in the user’s manual included
with the projector.
• From the on-screen menu, select "Ceiling Front" for "Orientation" as the method of projection.
Projector fixation plate
1. Check the tilt adjust knobs.
Verify that the four tilt adjust knobs are all set to the same
adjustment height.
If the projector fixation plate is slanted, correct vertical
adjustment and horizontal adjustment cannot be performed.
Knob adjustment height
2. Adjust the size of the projected image and the left/right tilt.
* The illustrations in this manual show the adjustment for an image with a 4:3 aspect ratio.
Connecting cables for screen and projector are omitted.
Adjust the size of the projected image and, if necessary, the tilt in clockwise or anticlockwise
direction.
Loosen the vertical adjust/arm fixation knobs.
- Loosen the two knobs shown in black in the illustration.
a
b
b
Move the projector back and forth to match the size of
the projected image to the screen.
To do this, grasp the projector firmly on both sides and
move it carefully.
a
Do not grasp the mirror section. Otherwise
the mirror may come off or become
damaged.
Caution
- To adjust tilt in the left/right direction, proceed to step
.
c
- If only size adjustment is to be performed, tighten the
two knobs shown in black in the illustration.
ENG-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn the left or right knob to adjust projector tilt in the
left or right direction.
- When the knob shown in black in the illustration
is tightened, the projector is rotated in the
counterclockwise direction.
c
d
c
d
When the adjustment is complete, tighten the opposite
knob that is still loosened.
3. Adjust the horizontal tilt of the projector.
The projector adapter allows adjustment over a range of approximately ±3 degrees.
Loosen the horizontal fixation nut (double nut) with a wrench.
Loosen the horizontal adjust screws (left and right) with the supplied hex wrench.
- Loosen the two screws shown in black in the illustration.
a
b
Make the adjustment by tightening the left or right screw until the top edge and bottom edge
of the image are parallel.
c
When the adjustment is complete, tighten the opposite screw that is still loosened.
Tighten the horizontal fixation nut (double nut) with a wrench.
d
e
ae
b
c
d
ENG-13
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Adjust the tilt.
Tilt adjustment is performed with the four adjustment knobs.
Front/rear tilt adjustment
Adjust together
Rotation axis
Left/right tilt adjustment
Fine adjustment in same direction as for vertical adjustment
Adjust together
Rotation axis
• If tilt adjustment achieved with these knobs is not sufficient, repeat the adjustment process from
step 2 on page ENG-12.
• During adjustment, the position of the projected image may shift. In such a case, loosen the wall
adapter and arm fixation screws and adjust the position.
This completes the adjustment.
Securely tighten all screws and adjustment knobs.
ENG-14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Attach the covers to the projector adapter and the wall adapter.
Attach cover (A) (with hook) and cover (B) (with notch) to the upper side of the wall adapter.
Slide the two covers towards the center while pushing them down, as shown in the
illustration. The bottom of each cover will then engage with the screw heads of the wall
adapter. At the same time, the hook of cover (A) will enter the notch of cover (B), thereby
locking the covers.
a
On the bottom side of the wall adapter, reverse the positions of covers (A) and (B) and attach
b
c
them in the same way as described in
Attach the arm cover.
.
a
The cover is fixed when the left and right tabs engage with the notches on the projector
adapter.
Attach the cable cover of the projector.
d
Turn the knobs on both sides to fasten the cover.
Cover (B)
Cover (A) should be at right
b
a
Arm cover
Cover (A)
a
c
b
Cover (B) should be at left
d
ENG-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Product name:
Model:
Wall mount unit
NP01WK/NP01WK1
Adjustment angle:
Adjustment width:
Up-down angle ±3°, left-right angle ±3°, inclination angle ±10°
Front-rear ±100 mm, left-right ±50 mm, up-down ±50 mm
External dimensions: 280 (W) x 541(D) x 219 (H) mm
Weight: Approx. 6.2kg
•Specifications and design are subject to change without notice.
(NP01WK1 only)
The NP01WK1 is distributed in North America only.
Using the wall plate
Screw position dimensional drawing (unit: mm)
Wall adapter fixation screw hole
4, dia. 5
Wall fixation screw hole
12, dia. 7
202
Cable pass-through hole
404
Mount the supplied wall plate to the vertical frame of the wall.
Securely fasten the wall adapter to the wall plate using the four supplied screws. Be sure to
observe all precautions listed on page ENG-8.
a
b
a
b
ENG-16
Download from Www.Somanuals.com. All Manuals Search And Download.
|