NEC Printer 120Lh User Manual

NEC Express5800/120Lh  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TARGET AUDIENCES  
NEC Express5800 Servers  
Key Customer Needs  
• Reliability & Security  
High Availability  
• Manageability  
Intensive Computing,  
180Rc-4  
• System Performance  
• Serviceability  
Transaction processing  
Availability  
Scaleability  
• Manageability  
• I/O Throughput  
Price/Performance  
140Rd-4  
140He  
High-end File, Database,  
Multi-user host, Low-End Computing  
120Rh-2  
Price  
• Scaleability  
120Lh  
• Manageability  
File, Low-end database  
120Rf-1  
120Eg  
Basic performance  
110Ei  
• Lowest Cost  
Peer to Peer, Low-end File, Print  
End User Base Configuration Price  
HIGHLIGHTS  
Up to 2 Intel 64-bit Xeon processors for powerful computing  
Up to 16GB of DDR333 SDRAM memory with ECC for great scalability  
Maximum internal storage capacity of 2.7TB through 6 hot-swap disk bays  
and 2 device bays with HDD Adapter Kit for Device Bay  
Enhanced disk performance via integrated support of Ultra 320 SCSI technology  
Six expansion slots (including two PCI Express(x8) slots) for maximum expandability.  
High availability through redundant hot-swap power supplies and cooling fans  
Available in tower or rack-mount (5U) form factor  
3
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY PRODUCT FEATURES & USER BENEFITS  
Next-generation Xeon Processing and Enhanced System Architecture  
NEC Express5800/120Lh is built to take full advantage of the latest Xeon processors.  
The new Xeon processor incorporates Extended Memory 64 Technology (EM64T).  
By supporting EM64T, memory addressing has been extended to run 64-bit code,  
allowing traditional processors to access larger memory amounts of higher than 4GB.  
The design of NEC Express5800/120Lh is built upon a 800MHz Front Side Bus (FSB),  
the E7520 chipset from Intel and PC2700 SDRAM memory. The E7520 chipset offers  
higher processor speeds for dual-processor allows increased throughput and enhanced  
overall system performance through the high-performance 800MHz FSB.  
The I/O subsystem of NEC Express5800/120Lh provides concurrency of data transfers  
between the different high speed I/O channels and CPU or memory.  
Improved Memory Architecture  
NEC Express5800/120Lh offers 8 DIMM sockets for industry-standard 256MB, 512MB,  
1GB and 2GB SDRAM PC2700 DIMM. The Express5800/120Lh allows easy expansion  
of system’s capabilities to memory-intensive environments (scalability up to 16GB) and  
comes standard with DDR 333MHz SDRAM for maximum data integrity.  
NEC Express5800/120Lh supports chipkill memory, memory mirroring and on-line spare memory to ensure  
continuous system operation.  
High-performance Ultra 320 Disk Drives  
NEC Express5800/120Lh supports the advanced disk drives with Ultra320 SCSI  
technology (10Krpm or 15Krpm), giving data rates of up to 320MBps for excellent  
throughput. The system is equipped with 6 hot-swap disk bays. In addition, three  
more hard disk drives can be added by installing the HDD Adapter Kit for Device  
Bay in the 5-inch device bays. (two device bays are occupied)  
Integrated Ultra 320 I/O Controller with Integrated RAID0/1  
NEC Express5800/120Lh system board features an integrated two-channel SCSI controller,  
providing Ultra320 SCSI interfaces to support Ultra320 hard-disk drives and SCSI media  
devices such as DAT and AIT.  
This SCSI controller supports RAID 0/1 as standard. This prevents loss of important data  
and allows higher system availability in the event of a disk failure, while reducing the cost  
for the extra device.  
The system board also includes a single-channel EIDE controller, providing support for  
the internally mounted CD-ROM drive.  
4
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional RAID Controllers  
NEC Express5800/120Lh comes with a complete range of optional high-performance  
Ultra 320 RAID controllers. These controllers give top levels of performance,  
maximum reliability and fault tolerance when running demanding server applications.  
• The 2 channel Ultra320 SCSI 64bit RAID controller:  
Intel GC80303 processor and 128MB of cache with battery backup unit are mounted.  
• The 1 channel Ultra320 SCSI 64bit RAID controller:  
Intel GC80302 processor and 64MB of cache are mounted. Optional battery backup  
unit can be installed.  
• The 0 channel Ultra320 SCSI 64bit RAID controller:  
Controls a standard-equipped internal SCSI controller and enables RAID0/1/5.  
AIC-7930W processor and 48MB of cache are mounted.  
Embedded Auto-sensing Dual-channel 10/100/1000Mbps Ethernet  
NEC Express5800/120Lh’s system board includes dual channel 10/100/1000Mbps  
network controller (based on the Intel 82541GI Ethernet Controller) optimizing server  
performance and providing immediate network-readiness. It can also auto-detect and  
auto-switch for 10M, 100M or 1000Mbps network speeds and supports Wake-on-LAN.  
NEC Express5800/120Lh provides high-availability (load balancing, fault tolerance)  
and top performance features for the most demanding networking environments.  
Integrated Graphic Chip  
NEC Express5800/120Lh has an integrated ATI Radeon 7000 high-performance SVGA  
sub-system that supports 8MB onboard SGRAM (Synchronous Graphics Memory)  
and resolutions up to 1280 x 1024 allowing high-quality images display.  
6 Free Expansion Slots  
The server’s expansion capabilities meet the needs of workgroup and department  
servers for high-performance I/O by providing two x8 PCI-Express slots, one 64-bit/133MHz PCI-X slot,  
two 64-bit/100MHz PCI-X and one 32-bit/33MHz PCI slots.  
5
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Device Connectors  
The external I/O connectors of NEC Express5800/120Lh are two 480Mbps USB2.0 Connectors,  
a PS/2-compatible mouse and a keyboard, connectors for VGA monitor, two serial port connectors  
(D-sub 9pin) and one parallel port connector (D-Sub 25pin).  
Redundant Hot-Swap Power Supplies and Cooling Fans  
NEC Express5800/120Lh(redundant power supply model) supports redundant hot-swap power  
supplies to ensure system operation even if one of the power supplies fails. The system comes  
standard with one 570W power supply and a second one is optional for redundancy.  
NEC Express5800/120Lh(non-redundant power supply model) comes standard with one 600W  
power supply.  
Also, NEC Express5800/120Lh supports optional redundant hot-swap cooling fans.  
Optional Backup Devices  
NEC Express5800/120Lh can accommodate optional high-performance internal tape  
drive for local data backup. DAT(DDS-4/20GB and DAT-72/36GB), LTO(100GB and  
200GB) and AIT(AIT-1 Turbo/40GB, AIT-2 Turbo/80GB and AIT-3/100GB) are supported.  
Supported Operating Systems  
NEC Express5800/120Lh is certified for the following operating systems:  
Microsoft Windows 2000 Server, Windows 2000 Advanced Server,  
Windows Server 2003 Standard Edition, Windows Server 2003 Enterprise Edition,  
Red Hat Linux.  
Optional Tower-to-Rack Conversion Kit  
A tower-to-rack conversion kit is available that provides rack conversion (5U) for NEC Express5800/120Lh  
6
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Remote Management Card  
2 types of remote management cards are available to significantly enhance  
such RAS functions as monitoring and remote control. Either one of the two  
cards may be selected.  
• Remote Management Card  
• Advanced Remote Management Card  
NEC ESMPRO Server Management Software  
NEC Express5800/120Lh includes NEC ESMPRO Server Management Software that allows network  
administrators to monitor, control and manage NEC Express5800 servers and desktops across a network  
from a management console or any PC with an Internet browser.  
NEC ESMPRO enables:  
• Local or remote management (via your network or the Web)  
• Comprehensive real-time fault management  
• Performance and load monitoring  
• Broad configuration and asset management  
It allows system administrators to optimize server operations through  
an easy-to-use Windows-based graphical user interface.  
NEC EXPRESSBUILDER System Installation Software  
NEC EXPRESSBUILDER makes your system installation simple. Just by inserting a single CD-ROM  
and following a series of user-friendly customization menus, a system administrator can set up and  
configure the system with ease.  
7
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT VIEW  
FRONT VIEW  
FRONT VIEW (Door Opened)  
1: 5.25-inch device bay  
2: CD-ROM drive  
1: Front door  
2: Key lock  
3: Disk LED (green/amber)  
4: 3.5-inch hard disk drive bay  
5: 3.5-inch floppy disk drive  
6: Cover open sensor  
7: Power switch  
8: LEDs (see the figure on the previous page)  
9: Reset switch  
3: Stabilizers (4)  
4: LAN ACCESS LED (green)  
5: DISK ACCESS LED (green/amber)  
6: POWER/SLEEP LED (green)  
7: STATUS LED (green/amber)  
10: Dump switch (NMI switch)  
8
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REAR VIEW  
The following figure shows the redundant hot-plug power supply model. For the non-redundant power  
supply model (fixed power supply is installed), you cannot find the items 2, 4, 5, and 6.  
1: Power supply  
2: Handle  
3: AC inlet  
4: Power LED  
5: Power fail LED  
6: Additional power supply slot  
7: Serial port B connector  
8: Additional PCI board slots  
9: Mouse connector  
10: Keyboard connector  
11: USB-1 and USB-2 connectors  
12: Serial port A connector  
13: Printer port connector  
14: Monitor connector  
15: Unit ID switch  
16: Link/ACT LED  
17: Speed LED  
18: LAN connector(s)  
19: Dump switch (NMI switch)  
INTERNAL VIEW  
1: Power supply  
2: Air duct  
3: Front cooling fan (Fan 3)  
4: 5.25-inch device bays (4 bays)  
5: 3.5-inch floppy disk drive  
6: 3.5-inch hard disk drive bay  
7: Cooling fan (Fan 2: option)  
8: Mother board  
9: Rear cooling fan (Fan 5)  
9
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MOTHER BOARD  
14: Remote management card slot  
15: Front panel interface connector  
16: USB connector  
17: Serial ATA connectors  
18: Speaker  
19: Jumper switch for clearing CMOS  
20: Jumper switch for clearing BIOS password  
21: Chassis intrusion connector  
22: PCI board slots  
1: DIMM sockets (slots 1 to 8 from top to bottom)  
2: Power signal connector  
(redundant hot-plug power supply only)  
3: Power connector  
4: Front cooling fan connector (Fan 3)  
5: Processor 1 socket  
6: Power connector  
7: Processor 2 socket  
8: Cooling fan signal connector (Fan 2: option)  
9: Cooling fan connector (Fan 2: option)  
10: IDE connector (for CD-ROM drive)  
11: Floppy disk drive connector  
12: Ultra320(B) connector (for internal file devices)  
13: Ultra320 (A) connector (for built-in hard disk)  
(slots PCI #1, PCI #2, PCI #3, PCI #4, PCI #5,  
and PCI #6 arranged from bottom to top)  
PCI #6: 64-bit, 133MHz, PCI-X  
PCI #5, #4: PCI EXPRESS (8-bus)  
PCI #3, #2: 64-bit, 100MHz, PCI-X  
PCI #1: 32-bit, 33MHz, PCI  
23: Rear cooling fan connector (Fan 5)  
24: Lithium battery  
25: Serial (COM B) connector  
10  
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYSTEM BLOCK DIAGRAM  
11  
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TECHNICAL SPECS  
N-Code (N8100-)  
N-Code (N8100-)  
Maker  
1075F  
1076F  
On-board  
PCI  
1077F  
1075F  
1076F  
Intel  
1077F  
Installation Type  
Bus Type  
Model  
64-bit Intel Xeon Processor  
3.20DGHz 3.60GHz  
Number of Channels  
Chip Manufacturer  
Chip Type  
1
Clock frequency  
SCSI  
Adaptec  
AIC-7902  
No.of  
CPU  
Standard  
Maximum  
1
2
CPU  
Interface  
Ultra 320 SCSI x 2  
4 *4*5  
1-inch height x6 (standard)  
+ 1-inch height x3 (option)*3  
CPU Package/Socket  
Hyper-Threading  
EM64 Technology  
CPU cooler  
FC-mPGA4/604pin socket  
Supported  
Device Bay (5.25")  
Expansion  
bay  
Supported  
Heat sink  
12K μops + 16KB *1  
Disk Bay (3.5")  
Cache L1 Cash(/CPU)  
Memory  
PCI EXPRESS (x8)  
64bit/133MHz PCI-X  
64bit/100MHz PCI-X  
32bit/33MHz PCI (5V)  
PCI EXPRESS  
PCI-X standard  
PCI standard  
Keyboard  
x2  
L2 Cash(/CPU)  
Standard  
1MB  
2MB  
Long Size x1  
1GB (512MB x2)  
16GB *2 (2GB x8)  
Long Size x2  
Capacity  
Expansion  
slot  
Maximum  
Long Size x1  
Addtion increment  
Number of slots  
2
8
PCI EXPRESS 1.0a  
PCI-X 1.0b  
Memory access method  
2Way Interleave  
ECC, Chipkill  
DDR333 SDRAM DIMM  
184pin  
PCI 2.2  
Memory Error  
Memory module  
Input  
Device  
104-key Keyboard  
2 button mouse  
D-sub 9pin × 2  
D-sub 25pin x1  
MiniD-sub 15pin × 1  
-
Mouse  
Number of pins  
Operating frequency  
Drive voltage(V)  
Buffer  
Serial Port  
333MHz  
Parallel Port  
Display  
2.5V  
SCSI  
Present  
External  
Interface  
Network  
RJ-45 x2  
BIOS  
Bus  
Maker  
Phoenix  
Keyboard Port  
Mouse Port  
Mini DIN 6pin × 1  
Mini DIN 6pin × 1  
A Series 4 pin x 2 (Ver2.0)  
option  
Chip set manufacturer  
Chip set name  
FSB frequency  
System data part  
Intel  
E7520  
800MHz  
USB Port  
ICMB Port  
64bit  
NEC ESMPRO/Server Manager,  
Server Agent  
bus width  
address part  
32bit  
Server Management  
Memory bus width  
I/O bus width  
128bit  
Cabinet design  
External dimention (W × D × H)  
Weight (MAX)  
Middle Tower  
PCI: 32bit, PCI-X: 64bit  
On-board  
ATI  
220 x 671 x 453mm *6  
22Kg (35kg)  
Installation Type  
Chip Manufacturer  
Chip Type  
Video  
Power module  
600W x1  
570W x1 (max.2)  
Option  
RADEON 7000  
Redundant  
Not supported  
Not supported  
Video RAM Capacity  
FDD  
8MB  
Hot swap  
Power  
Supported  
3.5"(2mode) x1  
Voltage  
AC100V/200V±10%  
Tray load type x1  
(Min. speed :x18, Max speed:x40)  
Diskless  
CD-ROM Drive  
Frequency  
50/60±1Hz  
AC inlet type  
2-pole + earth  
Std. Capacity  
Storage  
Standard: 1.8TB (300GB x 6)  
Max.  
Capacity  
Hot Plug  
Heat value  
2376kJ/h  
Option  
HDD  
Option: 2.7GB (300GB x 9) *3  
Supported  
Redundant  
Hot swap  
Redundant  
fan  
Supported  
RAID0, 1: standard  
RAID5: option  
On-board  
1000BASE-T x2  
1000/100/10Mbps  
Intel  
Maximum power consumption  
(Apparent poewr/Active power)  
Operation Condition  
Disk Array  
670VA/660W  
Installation Type  
Interface  
10-35 , 20-80%(no condensation)  
(Temperature,Humidity)  
Maximum Transmission  
Chip Manufacturer  
Chip Type  
AFT/ALB  
(by On Board I/Fs)  
PXE boot  
Windows 2000 Server  
Windows 2000 Advanced Server  
Windows Server 2003 Standard Edition  
Windows Server 2003 Enterprise Edition  
Red Hat Linux  
Network  
IDE  
82541GI  
Supported OS  
Supported  
Supported  
On-board  
Ultra ATA100  
PCI  
*1 As command cashe "Execution Trace Cache"is 12K uops capacity, as data  
cashe is 16KB capacity.  
Installation Type  
Interface  
*2 When standard DIMMs are removed.  
Bus Type  
*3 Three more HDDs can be installed by installing the HDD Adapter Kit for  
Device Bay [N8154-02F] in the 5-inch device bays. (Two bays are occupied)  
*4 Up to two backup devices can be installed to 5-inch device bays. When HDD  
Adapter Kit for Device Bay [N8154-02F] is installed to 5-inch device bays, only  
one backup device can be installed.  
*5 One bay is occupied by CD-ROM Drive.  
*6 When stabilizer is included, 293 x 697* x 453mm. (*N8100-1075F is 683mm)  
12  
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORY LIST  
CODE  
PRODUCT NAME  
DESCRIPTION  
ADDITIONAL CPU BOARDS (2nd CPU)  
Xeon (3.20DG/800/1M)  
Xeon (3.60G/800/2M)  
N8101-307  
N8101-308  
CPU Kit(X/3.20DG(1))  
CPU Kit(X/3.60G(2))  
ADDITIONAL MEMORY MODULES  
DDR333, Registered, 256MB x2  
Additional 512MB Memory Module set  
N8102-193  
N8102-194  
N8102-195  
N8102-196  
DDR333, Registered, 512MB x2  
DDR333, Registered, 1GB x2  
DDR333, Registered, 2GB x2  
Additional 1GB Memory Module set  
Additional 2GB Memory Module set  
Additional 4GB Memory Module set  
ADDITIONAL BOARDS  
Ultra SCSI(Wide), 1ch, LowProfile, Connected to tape devices.  
Ultra160 SCSI, 1ch, Connected to tape devices.  
Ultra320 SCSI, Low profile. Not support tape devices.  
LowProfile PCI card, for SATA Disk Array Unit connection  
Ultra320, 1ch, 64MB cache  
N8103-65F  
N8503-56F  
N8103-75  
SCSI controller  
SCSI controller  
SCSI Controller  
N8190-126  
N8103-80F  
N8103-79F  
N8103-81F  
N8103-86  
SCSI Controller  
Disk Array Controller(U320/1ch)  
Additional DAC Battery  
Disk Array Controller(U320/2ch)  
Disk Array Controller(0ch)  
Fibre Channel controller  
For N8103-80F  
Ultra320, 2ch, 128MB cache  
Ultra320 SCSI, 0ch (only connected to built-in HDD), 48MB cache  
64bit/133MHz PCI, for FC Disk array unit connection  
Enhances RAS functions  
N8190-120  
N8115-01CP01 Remote Management Card  
Enhances RAS functions  
N8115-02CP01 Advanced Remote Management Card  
ADDITIONAL INTERNAL DEVICES  
Ultra320 SCSI, 1" height 10Krpm, Hot-Plug  
Ultra320 SCSI, 1" height 10Krpm, Hot-Plug  
Ultra320 SCSI, 1" height 10Krpm, Hot-Plug  
Ultra320 SCSI, 1" height 15Krpm, Hot-Plug  
Ultra320 SCSI, 1" height 15Krpm, Hot-Plug  
Ultra320 SCSI, 1" height 15Krpm, Hot-Plug  
Kit to install three hot-plug SCSI HDDs into two 5-inch device bays  
DDS-4, 20GB(uncompressed)  
N8150-163F  
N8150-171F  
N8150-192  
N8150-165F  
N8150-172F  
N8150-193  
N8154-02F  
N8151-45F  
N8151-51  
73.2GB HDD  
146.5GB HDD  
300GB HDD  
36.3GB HDD  
73.2GB HDD  
146.5GB HDD  
HDD Adapter Kit for Device Bay  
Built-In DAT  
DAT72, 36GB(uncompressed)  
Built-In DAT  
DDS-4, 20GBx8(uncompressed)  
AIT-1 Turbo, 40GB(uncompressed)  
AIT-2 Turbo, 80GB (uncompressed)  
AIT-3, 100GB(uncompressed)  
200GB (uncompressed)  
N8151-39F  
N8151-55  
N8151-54  
N8151-41B  
N8151-49F  
N8181-38F  
N8181-39  
Built-In DAT auto-loader unit  
Built-In AIT  
Built-In AIT  
Built-In AIT  
Built-In LTO  
For redundant power supply  
For redundant fan  
Power Unit  
Redundant Fan  
* See the system configuration guide for connection cables required and directions for use.  
13  
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORY LIST  
CODE  
PRODUCT NAME  
DESCRIPTION  
EXTERNAL OPTIONS  
Max 14 Ultra320 SCSI HDDs, Rack mount, 3U height  
N8141-36AF  
N8141-28BF  
N8190-110F  
N8190-121F  
Disk Expansion Unit  
Device Expansion Unit  
5" half height device x4 or full height device x2, Rack mount, 2U height  
2Gbps, Max.12 HDDs, 512MB cache/controller, 2U height  
Fibre Channel Diskarray Unit  
SATA Disk Array Unit  
Max.12 HDDs, 512MB cache, 2U height, RAID 1/5 supported  
RACKMOUNT OPTIONS  
N8143-56F Rack conversion kit  
Converts tower model to rack-mountable one, 5U  
* See the system configuration guide for connection cables required and directions for use.  
14  
NEC Express5800/120Lh Product Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
©2004 NEC Corporation. All rights reserved. NEC ESMPRO are registered trademarks of NEC Corporation and/or one or  
more of its subsidiaries. Intel and Pentium are registered trademarks and Xeon is a trademark of Intel Corporation. Microsoft,  
Windows, and Windows NT are registered trademarks of Microsoft Corporation. All other trademarks and trade names are the  
property of their respective owners.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Nady Systems Microphone dkw duo User Manual
NEC Video Game Controller nec User Manual
NordicTrack Treadmill NTTL11512 User Manual
NuTone Ventilation Hood NP629004 User Manual
Oce North America Printer TCS400 User Manual
Optoma Technology Projection Television EP7155 User Manual
Oregon Scientific Thermometer RGR126 User Manual
Oster Fryer 3246 User Manual
Panasonic Projector D6KE User Manual
Partner Tech Trimmer PWT420 User Manual