NAD DVD Player T 572 User Manual

T 572  
DVD / CD / MP3 Player  
Owners Manual  
GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Programmed Playback with Video CD  
and Audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Programmed Playback with Video CD  
Introduction  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5  
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Front Panel and Display Window . . . . . . . . . . . . . . 6  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
and Audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Repeat Programmed Tracks/All . . . . . . . . . . 19  
Erasing a Track from Program List. . . . . . . . 19  
Erasing the Complete Program List . . . . . . . 19  
Operation with MP3 Disc. . . . . . . . . . . . . . . . . . . . 20  
Playing an MP3 Disc . . . . . . . . . . . . . . . . . . . . . 20  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Moving to another Track . . . . . . . . . . . . . . . 20  
Repeat Track/All/Off. . . . . . . . . . . . . . . . . . . 20  
Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 20  
Programmed Playback with MP3 Disc . . . . . . . . . 21  
Programmed Playback with MP3 Disc . . . . . . . . 21  
Repeat Programmed Tracks/All . . . . . . . . . . 21  
Erasing a Track from Program List. . . . . . . . 21  
Erasing the Complete Program List . . . . . . . 21  
Additional Information . . . . . . . . . . . . . . . . . . . . . 22  
Last Condition Memory . . . . . . . . . . . . . . . . . . . 22  
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 22  
HDCD Playback. . . . . . . . . . . . . . . . . . . . . . . . . 22  
Preparation  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10  
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . 9  
Connecting to Optional Equipment . . . . . . . . . . . 10  
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 11-14  
General Explanation. . . . . . . . . . . . . . . . . . . . . . 11  
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . 11  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 12-14  
Initial Settings General Operation. . . . . . . . . 12  
Language . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Parental Control. . . . . . . . . . . . . . . . . . . . . . 14  
Reference  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 24  
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Operation  
Operation with DVD, Video CD and Audio CD. 15-18  
Playing a DVD, Video CD and Audio CD . . . . . . 15  
Exchanging discs during playback . . . . . . . . 15  
Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 15  
Exchanging the disc and starting playback. . 15  
General Features. . . . . . . . . . . . . . . . . . . . . . . . 16  
Moving to another TITLE . . . . . . . . . . . . . . . 16  
Moving to another CHAPTER/TRACK . . . . . 16  
Still Picture and Frame-by-Frame Playback . 16  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 16  
Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Time Search . . . . . . . . . . . . . . . . . . . . . . . . 17  
Selecting the sound enhancement . . . . . . . 17  
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Marker Search. . . . . . . . . . . . . . . . . . . . . . . 18  
Special DVD Features . . . . . . . . . . . . . . . . . . . . 18  
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 18  
Changing the Audio Language. . . . . . . . . . . 18  
Changing the Audio Channel . . . . . . . . . . . . 18  
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
About the symbols for instructions  
Indicates hazards likely to cause harm to the unit  
itself or other material damage.  
Indicates special operating features of this unit.  
Indicates tips and hints for making the task easier.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
Disc-related terms  
Title (DVD only)  
Playable Discs  
The main film content or accompanying feature content  
or additional feature content, or music album.  
Each title is assigned a title reference number enabling  
you to locate it easily.  
DVD Video  
(8 cm / 12 cm disc)  
Video CD (VCD)  
(8 cm / 12 cm disc)  
Chapter (DVD only)  
Sections of a picture or a musical piece that are smaller  
than titles.  
Audio CD  
(8 cm / 12 cm disc)  
In addition, this unit can play a HDCD, CD-R or CD-RW  
that contains audio titles or MP3 files.  
A title is composed of one or several chapters. Each  
chapter is assigned a chapter number, enabling you to  
locate the chapter you want. Chapter numbers may not  
be recorded on all discs.  
Notes  
– Depending on the conditions of the recording equip-  
ment or the CD-R/RW disc itself, some CD-R/RW  
discs cannot be played on this unit.  
– This unit cannot play CD-R/RW discs that do not con-  
tain any data, or contain different kinds of formatted  
data other than MP3 and CD-DA data.  
– Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
– Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal). It may result in malfunctions.  
Track (Video CD and audio CD only)  
Sections of a picture or a musical piece on a video CD  
or an audio CD. Each track is assigned a track number,  
enabling you to locate the track you want.  
Scene  
On a video CD with PBC (Playback control) functions,  
moving pictures and still pictures are divided into sec-  
tions called “Scenes”. Each scene is displayed in the  
menu screen and assigned a scene number, enabling  
you to locate the scene you want.  
A scene is composed of one or several tracks.  
Notes on DVDs and Video CDs  
Some playback operations of DVDs and Video CDs  
may be intentionally fixed by software manufacturers.  
As this unit plays DVDs and Video CDs according to  
disc content designed by the software manufacturer,  
some playback features of the unit may not be avail-  
able, or other functions may be added.  
Refer also to the instructions supplied with the DVDs  
and Video CDs. Some DVDs made for business pur-  
poses may not be playable on this unit.  
Types of video CDs  
There are two types of video CDs:  
Video CDs equipped with PBC (Version 2.0)  
PBC (Playback control) functions allow you to interact  
with the system via menus, search functions, or other  
typical computer-like operations. Moreover, still pictures  
of high resolution can be played if they are included in  
the disc.  
Regional code of the DVD player and DVDs  
This DVD player is designed and manufactured  
for playback of region “2” encoded DVD soft-  
ware. The region code on the labels of some DVD discs  
indicates which type of player can play those discs. This  
unit can play only DVD discs labeled “2” or “ALL”. If you  
try to play any other discs, the message “Check Regional  
Code” will appear on the TV screen. Some DVD discs  
may not have a region code label even though their  
playback is prohibited by area limits.  
Video CDs not equipped with PBC (Version 1.1)  
Operated in the same way as audio CDs, these discs  
allow playback of video pictures as well as sound, but  
they are not equipped with PBC.  
2
®
HDCD (High Definition Compatible Digital )  
HDCD® (High Definition Compatible Digital®) is a  
recording system that has improved audio CD sound in  
dynamic range, sound field reproducibility and vocal  
acoustics.  
This DVD player is equipped with an HDCD decoder.  
The HDCD indicator illuminates when playing an  
HDCD-encoded audio CD.  
Note on DTS-encoded CDs  
To avoid possible damage to the audio system, turn  
down the volume before playing back such discs. Adjust  
the volume gradually to personal preference. To enjoy  
DTS Digital SurroundTM playback, an external 5.1 chan-  
nel DTS Digital SurroundTM decoder system must be  
connected to the digital output of the player.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use (Continued)  
Precautions  
Storing discs  
After playing, store the disc in its case.  
Handling the unit  
Do not expose the disc to direct sunlight or sources of  
heat, or leave it in a parked car exposed to direct sun-  
light, as there may be a considerable temperature build-  
up inside the car.  
When shipping the unit  
The original shipping carton and packing materials  
come in handy. For maximum protection, re-pack the  
unit as it was originally packed at the factory.  
Cleaning discs  
When setting up the unit  
Fingerprints and dust on the disc can cause poor pic-  
ture quality and sound distortion. Before playing, clean  
the disc with a clean cloth. Wipe the disc from the cen-  
ter out.  
The picture and sound of a nearby TV, VCR, or radio  
may be distorted during playback. In this case, position  
the unit away from the TV, VCR, or radio, and turn off  
the unit after removing the disc.  
To keep the exterior surfaces clean  
Do not use volatile liquids, such as insecticide spray,  
near the unit. Do not allow rubber or plastic products to  
contact the unit for a long period of time. They will leave  
marks on the surface.  
To move the unit  
When you move the player, take out any discs. If you  
don’t, the discs may be damaged or drop into the inter-  
nal workings of the DVD player.  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
Cleaning the unit  
About Symbols  
To clean the cabinet  
Use a soft, dry cloth. If the surfaces are extremely dirty,  
use a soft cloth lightly moistened with a mild detergent  
solution. Do not use strong solvents, such as alcohol,  
benzine, or thinner, as these might damage the surface  
of the unit.  
About the  
symbol display  
” may appear on the TV screen during operation.  
This icon means the function explained in this owner’s  
manual is not available on that specific DVD video disc.  
To obtain a clear picture  
About the disc symbols for instructions  
The DVD player is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or  
worn down, the picture quality will be poor.  
Regular inspection and maintenance are recommended  
after every 1,000 hours of use. (This depends on the  
operating environment.)  
When a section in this manual includes the following  
icons, the data provided herein is applicable only to the  
software represented by that icon.  
DVD DVD  
VCD2.0  
VCD1.1  
CD  
Video CDs with the PBC (playback control)  
function.  
For details, please contact your nearest dealer.  
Video CDs without the PBC (playback control)  
function.  
Notes on Discs  
Audio CDs.  
Handling discs  
MP3 MP3 disc.  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that fingerprints will not  
get on the surface.  
Do not stick paper or tape on the disc.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel and Display Window  
STANDBY/ON indicator  
Lights red when the player is in Standby mode (off).  
1 2 3 4 (left/right/up/down), ENTER  
- Selects an item in the menu.  
- Acknowledges menu selection.  
RANDOM  
Plays tracks in random order.  
MENU  
REPEAT  
Accesses menu on a DVD disc.  
Repeat chapter, track, title, Disc, all.  
SKIP ( S/ T)  
Moves to PREVIOUS or NEXT chapter/track.  
STOP ( 9)  
Stops playback.  
PLAY ( 2)  
Starts playback.  
Display window  
Shows the current  
status of the player.  
Remote Sensor  
Point the DVD Player remote  
control here.  
OPEN/CLOSE ( /)  
Opens or closes the disc tray.  
Disc Tray  
Insert a disc here.  
STOP ( 9)  
Stops playback.  
SCAN ( Q/ R)  
Press for fast reverse search or forward search.  
POWER  
Switches the player ON and OFF.  
NEXT DISC  
Moves to the next available disc tray.  
ANGLE Lights when multi angles  
TITLE Indicates current title number  
are present.  
CHP/TRK Indicates current chapter or track number  
Indicates total playing time/elapsed time  
PROG. Programmed playback active  
A light will appear if a disc is in the disc  
tray. The current disc tray flashes.  
DVD  
DVD inserted  
CD Audio CD inserted  
VCD Video CD inserted  
HD CD HDCD disc inserted  
MP3 MP3 disc inserted  
RANDOM RANDOM play-  
back active  
Indicates repeat  
mode  
Indicates current player function:  
Playback, Pause, etc.  
MP3 VCD HD CD DVD  
1
TITLE  
CHP/TRK  
PROG.  
RANDOM ALL  
A
B
2
5
3
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
POWER  
OPEN/CLOSE  
Switches DVD Player ON and OFF.  
Opens and closes the disc tray.  
SETUP •  
AUDIO  
Accesses or removes setup menu.  
Selects an audio language (DVD) or  
an audio channel (CD).  
REPEAT •  
Repeat chapter, track, title, all.  
SUBTITLE  
POWER  
OPEN/CLOSE  
Selects a subtitle language.  
A-B •  
Repeat sequence.  
SETUP  
AUDIO  
REPEAT  
A-B  
RANDOM  
SOUND  
ANGLE  
Selects a DVD camera angle if  
available.  
RANDOM •  
Plays tracks in random order.  
SUBTITLE ANGLE  
SOUND  
Selects sound mode during disc  
playback.  
TITLE  
MENU  
TITLE  
Displays the discs Title menu, if  
available.  
MENU  
1 2 3 4 (left/right/up/down)  
SELECT  
ENTER  
Accesses menu on a DVD disc.  
Selects an item in the menu.  
SELECT/ENTER  
Acknowledges menu selection.  
DISPLAY  
Accesses On-Screen display  
DISPLAY  
RETURN  
RETURN  
ZOOM  
MARKER SEARCH  
ZOOM •  
- Removes the setup menu.  
- Displays the menu of a video CD  
with PBC.  
Enlarges video image.  
SCAN  
SKIP  
PLAY  
MARKER •  
STOP  
Marks any point during playback.  
SCAN ( Q/ R)  
Press for fast reverse search or for-  
ward search.  
NEXT DISC PAUSE/STEP  
SLOW  
SEARCH •  
Displays MARKER SEARCH menu.  
NEXT DISC •  
Moves to the next available disc tray.  
PLAY (  
2)  
Starts playback.  
1
4
2
3
6
5
8
0
STOP ( 9)  
Stops playback.  
PAUSE/STEP ( ;) •  
Pauses playback temporarily/ press  
repeatedly for frame-by-frame  
playback.  
7
CLEAR  
9
PROGRAM  
SKIP ( S/ T )  
Moves to PREVIOUS or NEXT  
chapter/track.  
Reverse SLOW ( , ) •  
Reverse slow playback.  
0-9 number buttons  
Selects numbered items in a menu.  
Forward SLOW ( . ) •  
Forward slow playback.  
PROGRAM  
Accesses or removes program menu.  
CLEAR  
Removes a track number on the  
program menu or a mark on the  
MARKER SEARCH menu.  
Remote Control Operation Range  
Remote control battery installation  
Point the remote control at the remote sensor and press  
the buttons.  
Detach the battery cover on the rear of  
the remote control, and insert two R03  
Distance: About 23 ft (7 m) from the front of the  
remote sensor  
(size AAA) batteries with  
aligned correctly.  
and  
Angle: About 30° in each direction of the front of the  
remote sensor  
Caution  
Do not mix old and new batteries. Never  
mix different types of batteries (stan-  
dard, alkaline, etc.).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
TO TV (SCART) Jack  
Connect to a TV with SCART jack.  
VIDEO OUTPUT Switch  
Select either S-VIDEO OUT or SCARTs RGB signal,  
depending on how you connected the DVD Player to the TV.  
S-VIDEO OUT  
Connect to a TV with S-Video inputs.  
VIDEO OUT  
Connect to a TV with video inputs.  
*System Select switch  
12V TRIGGER IN  
By connecting this DVD player to another NAD  
audio component or system controller equipped  
with a 12V trigger output, you can remotely operate  
the T572 power ON/OFF.  
AC Power Cord  
Plug into the power source.  
COAXIAL (Digital audio  
out jack)  
Connect to digital (coaxial)  
OPTICAL (Digital audio out jack)  
Connect to digital (optical) audio equipment.  
audio equipment.  
ANALOG AUDIO OUT (Left/Right)  
Connect to an amplifier, receiver or stereo system.  
Dust protection cap  
Remove the dust protection cap from the OPTICAL  
DIGITAL OUT jack and connect the optical digital cable  
(not supplied) securely so that the configurations of  
both the cable and the connector match. Keep the dust  
protection cap and always reattach the cap when not  
using the connector to protect against dust intrusion.  
* System Select switch  
You can enjoy NTSC or PAL discs by using System  
Select switch to choose the appropriate system.  
PAL:  
Select when DVD player is connected with  
PAL-TV.  
NTSC: Select when DVD player is connected with  
NTSC-TV.  
AUTO: Select when DVD player is connected with  
Multi system TV.  
When the selected System Select switch does not  
coincide with the system of your TV, normal color  
picture may not be displayed.  
Do not touch the inner pins of the jacks on the rear  
panel. Electrostatic discharge may cause permanent  
damage to the unit.  
Set System Select switch when the power is turned  
off.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Rear of TV  
Tips  
SCART INPUT  
Depending on your TV and other equipment you wish  
to connect, there are various ways you could connect  
the player. Use only one of the connections  
described below.  
S-VIDEO  
INPUT  
VIDEO  
INPUT  
AUDIO INPUT  
R
L
Please refer to the manuals of your TV, VCR, Stereo  
System or other devices as necessary to make the  
best connections.  
For better sound reproduction, connect the players  
AUDIO OUT jacks to the audio in jacks of your  
amplifier, receiver, stereo or audio/video equipment.  
See Connecting to optional equipmenton page 10.  
A
V
S
T
Caution  
Make sure the DVD Player is connected directly to the  
TV. Select the TV to the corresponding video input.  
Do not connect the DVD Players AUDIO OUT jack to  
the phono in jack (Turntable) of your audio system.  
Do not connect your DVD Player via your VCR. The  
DVD image could be distorted by the copy protection  
system.  
Connecting to a TV  
Make one of the following connections, depending on  
the capabilities of your existing equipment.  
When using the SCARTs RGB signal, set the Video  
Output Select switch to COMPONENT. When using  
the S-VIDEO OUT jack, set the Video Output Select  
switch to S-VIDEO.  
Rear of DVD player  
Note  
If the TV has an S-video input, connect the DVD player  
with the S-video cable. When using an S-video cable,  
do not connect the yellow video cable.  
Video connection (Good)  
Connect the VIDEO OUT jack on the DVD Player to  
1
the video in jack on the TV using the video cable  
supplied (V).  
Connect the Left and Right AUDIO OUT jacks of  
2
the DVD Player to the audio left/right in jacks on the  
TV (A) using the supplied audio cables.  
S-Video connection (Better)  
Connect the S-VIDEO OUT jack on the DVD Player  
1
to the S-Video in jack on the TV using an optional  
S-Video cable (S).  
Connect the Left and Right AUDIO OUT jacks of  
2
the DVD Player to the audio left/right in jacks on the  
TV (A) using the supplied audio cables.  
SCART connection  
Connect the TO TV scart jack on the DVD Player to the  
corresponding in jacks on the TV using the scart cable  
(T).  
Note  
For using SCARTs RGB signal, set the Video Output  
Select switch to COMPONENT.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (Continued)  
Rear of DVD player  
Connecting to Optional Equipment  
Connecting to an amplifier equipped with two  
channel analog stereo or Dolby Surround  
Connect the Left and Right AUDIO OUT jacks on the  
DVD Player to the audio left and right in jacks on your  
amplifier, receiver or stereo system, using the supplied  
audio cables (A).  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/  
Video receiver equipped with a multi-channel  
decoder (Dolby Digital, MPEG 2 or DTS)  
O
A
X
Connect one of the DVD Players DIGITAL AUDIO  
1
OUT jacks (OPTICAL O or COAXIAL X) to the cor-  
responding in jack on your amplifier. Use an option-  
al digital (optical O or coaxial X) audio cable.  
R
L
OPTICAL  
COAXIAL  
You will need to activate the players digital output.  
DIGITAL INPUT  
AUDIO INPUT  
DIGITAL INPUT  
2
(See Digital Audio Outputon page 13).  
Amplifier (Receiver)  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
Audio/Video receiver that supports one or more of the  
audio formats supported by your DVD Player (MPEG 2,  
Dolby Digital and DTS). Check the receiver manual and  
the logos on the front of the receiver.  
Note  
This player does not perform internal (2 channel)  
decoding of a DTS sound track. To enjoy DTS  
multi channel surround, you must connect this player to  
a DTS compatible receiver via one of this players  
digital audio outputs.  
Notes  
If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will  
produce a strong, distorted sound or no sound at all.  
Six Channel Digital Surround Sound can only be  
obtained if your receiver is equipped with a Digital  
Multi-channel surround sound decoder.  
To confirm the audio format of the current DVD  
selection display, press AUDIO.  
Repeated pressing of the AUDIO button may allow  
you to select between various audio formats available  
on the disc.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation  
Repeat mode Icons  
General Explanation  
This manual gives basic instructions for operating the  
DVD Player. Some DVDs require specific operation or  
allow only limited operation during playback. When this  
TITLE  
Repeat Title  
CHAPT  
Repeat Chapter  
TRACK  
Repeat Track (non-PBC Video CDs  
occurs, the symbol  
appears on the TV screen, indi-  
and Audio CD only)  
cating that the operation is not permitted by the DVD  
Player or is not available on the disc.  
ALL  
Repeat All Tracks (non-PBC Video CDs  
and Audio CD only)  
On-Screen Display  
General playback status can be displayed on the TV  
A
B
Repeat A-B  
OFF  
Repeat Off  
screen. Some items can be changed on the menu.  
Resume play from this point  
Action prohibited or not available  
On-screen display operation  
Press DISPLAY during playback.  
Notes  
1
2
Some discs may not provide all of the features includ-  
ed on the on-screen display example shown below.  
If no button is pressed for 10 seconds, the on-screen  
display disappears.  
Press 3or 4to select an item.  
The selected item will be highlighted.  
Press 1or 2to change the setting of an item.  
3
The number buttons can be also be used for setting  
numbers (e.g., title number). For some functions,  
press SELECT/ENTER to execute the setting.  
DVD  
Items  
Function (Press 3  
/
4to select desired item)  
Selection Method  
Title Number  
Displays the current title number and total number of  
1 / 2, or Numbers,  
SELECT/ENTER  
1/3  
1/12  
available titles, and skips to a desired title number.  
Chapter Number  
Time search  
Displays the current chapter number and total number of  
available chapters, and skips to a desired chapter number.  
1 / 2, or Numbers,  
SELECT/ENTER  
Displays the elapsed playing time, and  
searches a point identified by its elapsed time.  
Numbers,  
SELECT/ENTER  
0:16:57  
Audio language  
and Digital Audio  
Output mode  
Displays the current audio soundtrack language,  
encoding method and channel number, and  
any changes you make to the setting.  
1
ENG  
D
6 CH  
1
/
2
Subtitle language  
Displays the current subtitles language, and  
1
1
/
/
2
2
OFF  
1/1  
any changes you make to the setting.  
Angle  
Displays the current angle number and total number of  
angles, and any changes you make to the angle number.  
Sound  
Displays the current sound mode, and  
any changes you make to the setting.  
1
/
2
NORM.  
VCD1.1  
VCD2.0  
CD  
Items  
Function (Press 3  
/
4to select desired item)  
Selection Method  
Track Number  
Displays the current track number, total number of tracks  
and PBC On mode, and skips to the desired track number.  
1
/
2
, or Numbers,  
1/4  
SELECT/ENTER  
Time  
Displays the elapsed playing time (Display only)  
0:16:57  
Audio Channel  
Sound  
Displays the audio channel, and  
STER.  
1
1
/
/
2
2
changes you make to the audio channel.  
Displays the current sound mode, and  
any changes you make to the setting.  
NORM.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued)  
Menu Language  
Select a language for the setup menu. This is the menu  
you see when you press SETUP.  
Initial Settings  
You can install your own Personal Preferences.  
Initial Settings General Operation  
English  
Spanish  
French  
German  
Italian  
Disc Audio  
Disc Subtitle  
Disc Menu  
Press SETUP.  
The setup menu appears.  
1
Rating  
Country Code  
TV Aspect  
Original  
English  
Disc Audio  
Menu Language  
P
Digital Audio Output  
Disc Subtitle  
Disc Menu  
French  
Rating  
German  
Spanish  
Italian  
Country Code  
TV Aspect  
Others  
Menu Language  
Digital Audio Output  
Chinese  
Polish  
Hungarian  
Russian  
Other — — — —  
Picture  
TV Aspect DVD  
Others  
4:3 Letterbox: Select when a standard 4:3 TV is con-  
nected. Displays theatrical images with masking bars  
above and below the picture.  
4:3 Panscan: Select when a standard 4:3 TV is con-  
nected. Displays pictures cropped to fill your TV screen.  
Both side of the original picture may be cut off.  
16:9 Wide: Select when a 16:9 wide TV is connected.  
Press 3/4to select the desired item.  
The screen will display the current setting for the  
selected item, as well as alternate setting(s).  
2
While the desired item is displayed, press 2,  
then 3/4to select the desired setting.  
3
4
5
Press SELECT/ENTER to confirm your selection.  
Some items require additional steps.  
4:3 Letterbox  
4:3 Panscan  
16:9 Wide  
Disc Audio  
Press SETUP, RETURN or PLAY to exit the  
setup menu.  
Disc Subtitle  
Disc Menu  
Rating  
Country Code  
TV Aspect  
Language  
Menu Language  
Digital Audio Output  
Disc Language DVD  
Select a language for the discs Menu, Audio and  
Subtitle.  
Others  
Original : The original language included on the disc is select-  
ed.  
Other : To select another language, enter the 4-digit number  
corresponding to the language code list on page 24. If you  
enter the wrong language code, press CLEAR.  
Original  
English  
Disc Audio  
Disc Subtitle  
Disc Menu  
French  
Rating  
German  
Spanish  
Italian  
Country Code  
TV Aspect  
Menu Language  
Digital Audio Output  
Chinese  
Polish  
Hungarian  
Russian  
Other — — — —  
Others  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued)  
Sound  
Others  
Digital Audio Output  
The DRC, Vocal and PBC settings can be changed.  
Press 3/4to select the desired item and press  
SELECT/ENTER. The setting of the selected item  
alternates between On and Off.  
Each DVD disc may have a variety of audio output  
options. Set the players Digital Audio Output according  
to the type of audio system you use.  
DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM”  
if you connect the DVD Players DIGITAL OUT jack to a  
Dolby Digital decoder (or an amplifier or other equip-  
ment with a Dolby Digital decoder).  
Stream/PCM: Select Stream/PCMif you connect the  
DVD Players DIGITAL OUT jack to an amplifier or other  
equipment with a DTS decoder, Dolby Digital decoder  
or MPEG decoder.  
DRC On  
Vocal On  
PBC On  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Country Code  
TV Aspect  
Menu Language  
i
Digital Audio Output  
PCM: Select when connected to a 2 channel digital  
stereo amplifier. The DVD player outputs sounds in the  
PCM 2ch format when you play a DVD video disc  
recorded on the Dolby Digital, MPEG1 or MPEG2  
recording system.  
Others  
Dynamic Range Control (DRC)  
With the DVD format, you can hear a programs sound-  
track in the most accurate and realistic presentation  
possible, thanks to digital audio technology. However,  
you may wish to compress the dynamic range of the  
audio output (the difference between the loudest sounds  
and the quietest ones). Then, you may listen to a movie  
at a lower volume without losing clarity of sound. Set  
DRC to On for this effect.  
DOLBY  
DIGITAL /PCM  
Stream/PCM  
PCM  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Country Code  
TV Aspect  
Sample Freq.  
48 KHz  
Menu Language  
Digital Audio Output  
96KHz  
Vocal  
Others  
Set Vocal to On only when a multi-channel karaoke  
DVD is playing. The karaoke channels on the disc will  
mix into normal stereo sound.  
Sample Frequency  
To change the Sample Frequency setting, first select  
the desired Digital Audio Output as indicated above.  
If your receiver or amplifier is NOT capable of handling  
96KHz signals, select 48KHz. When this choice is  
made, this unit will automatically convert any 96KHz  
signals to 48KHz so your system can decode them.  
If your receiver or amplifier is capable of handling  
96KHz signals, select 96KHz. When this choice is  
made, this unit will pass all signals through without  
down conversion, or processing.  
PBC  
Set Playback Control (PBC) to On or Off.  
On: Video CDs with PBC are played according to the PBC.  
Off: Video CDs with PBC are played the same way as Audio  
CDs.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued)  
Parental Control  
DVD  
Country Code  
Enter the code of a country/area whose standards were  
used to rate the DVD video disc, referring to the list  
(See Country Code List, page 25.).  
Rating DVD  
Movies on DVDs may contain scenes not suitable for  
children. Therefore, discs may contain Parental Control  
information that applies to the complete disc or to  
certain scenes on the disc. These scenes are rated  
from 1 to 8, and alternatively, more suitable scenes are  
available for selection on some discs. Ratings are  
country-dependent. The Parental Control feature allows  
you to prevent discs from being played by your children  
or to have certain discs played with alternative scenes.  
Code Set  
Disc Audio  
Disc Subtitle  
Disc Menu  
U
S
Rating  
Country Code  
TV Aspect  
Menu Language  
Digital Audio Output  
Others  
8
Disc Audio  
Disc Subtitle  
Disc Menu  
7
6
Select Country Code using the 3/4buttons on  
the setup menu.  
Rating  
5
1
Country Code  
TV Aspect  
4
3
2 While Country Code is selected, press 2.  
Menu Language  
Digital Audio Output  
2
1
Unlock  
Change  
3 Follow step 3 of Ratingon left.  
Others  
4 Select the first character using the 3/4buttons.  
Select Ratingon the Setup menu using the 3  
and 4buttons.  
1
Shift the cursor using /2 buttons and select  
1
5
6
the second character using 3/4buttons.  
2 While Ratingis displayed, press 2.  
Press SELECT/ENTER to confirm your country  
code selection, then press SETUP to exit the  
menu.  
When you have not entered a password yet;  
3
Install a 4-digit password using the number buttons  
to create a personal 4-digit security password, then  
press SELECT/ENTER. Enter the 4-digit password  
again and press SELECT/ENTER to verify.  
When you have already entered a password;  
Install your 4-digit password using the number  
buttons to confirm the personal 4-digit security  
password, then press SELECT/ENTER.  
Note  
Confirmation of your 4-digit password is necessary  
when the code is changed (see Changing the 4-digit  
codebelow ).  
Changing the 4-digit code  
1 Follow Steps 1-2 as shown above to the left (Rating).  
2 Install your old code, then press SELECT/ENTER.  
3 Select Change using the 3/4buttons then press  
SELECT/ENTER.  
4 Install the new 4-digit code, then press  
SELECT/ENTER.  
If you make a mistake before pressing SELECT/ENTER,  
press CLEAR and install your 4-digit security password  
again.  
Select a rating from 1 to 8 using the 3/4but-  
tons. One (1) has the least playback restrictions.  
4
Eight (8) has the most playback restrictions.  
Unlock: If you select Unlock, Parental Control is  
not active. The disc will play without restrictions.  
Ratings 1 to 8: Some discs contain scenes not  
suitable for children. If you set a rating for the play-  
er, all disc scenes with the same rating or lower will  
be played. Higher rated scenes will not be played  
unless an alternative scene is available on the disc.  
The alternative must have the same rating or a  
lower one. If no suitable alternative is found,  
playback will stop. You must enter your 4-digit  
password or change the rating level in order to play  
the disc.  
5 Install exactly the same code a second time and veri-  
fy by pressing SELECT/ENTER.  
6 Press SETUP to exit the menu.  
If you forget your 4-digit code  
If you forget your password, to clear the current pass-  
word, follow the procedure below.  
1 Press SETUP to display the setup menu.  
2 Use the Number buttons to enter the 6-digit number  
210499.”  
The 4-digit password is cleared. P CLrappears on the dis-  
play. The message will appear if the disc tray is closed. It  
will be on the display until you try another feature.  
3 Enter a new code as shown above to the left (Rating).  
Press SELECT/ENTER to confirm your rating  
5
selection, then press SETUP to exit the menu.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD, Video CD and Audio CD  
Exchanging discs during playback  
Playing a DVD, Video CD and Audio CD  
Press OPEN/CLOSE on the front panel during play-  
back to open the disc tray.  
VCD2.0  
VCD1.1  
Playback Setup  
DVD  
CD  
Press NEXT DISC to rotate the disc trays to the  
desired position. The carousel will rotate clockwise by  
one disc increments.  
Exchange the discs and press OPEN/CLOSE to close  
the disc tray.  
Turn on the TV and select the video input source  
corresponding to the DVD player.  
Audio system: Turn on the audio system and select  
the input source connected to the DVD player.  
Press OPEN/CLOSE to open the disc tray.  
Note  
1
The disc tray presently loaded in the play position can  
not be exchanged.  
Load your disc in the tray, with the label facing  
2
up.  
When a double-sided DVD is inserted, make sure  
the side you want to play is facing down.  
Discs can be loaded one at a time by pressing  
NEXT DISC to rotate the carousel.  
Skipping discs  
Press NEXT DISC during play or when playback is  
stopped.  
Press OPEN/CLOSE to close the tray.  
READING appears on the TV screen, and playback  
starts automatically. If playback does not start,  
press PLAY.  
Notes  
3
When NEXT DISC is pressed, the disc tray rotates  
and playback begins from the beginning of the next  
disc.  
In some cases, the disc menu may appear instead.  
If there is no disc on the next disc tray, the following  
disc tray will be selected.  
When NEXT DISC is pressed during playback of disc  
5, playback of disc 1 will start.  
If a disc menu screen is displayed  
The menu screen may be displayed first after loading a  
DVD or Video CD that contains a menu.  
Exchanging the disc and starting playback  
DVD  
Use the 1 2 3 4 buttons to select the title/chapter  
and additional selections you want, then press  
SELECT/ENTER to start playback.  
Press TITLE or MENU to return to the disc menu  
screen.  
1.Press OPEN/CLOSE during playback or when play-  
back is stopped.  
Play stops (if pressed during playback), the disc tray opens  
and the disc that was in the play position comes to the front.  
2.Exchange the disc.  
3.Press OPEN/CLOSE or PLAY again.  
The tray closes and playback begins (with the disc  
that was in front).  
VCD2.0  
Use the number buttons to select the track you want  
to view.  
Press RETURN to return to the disc menu screen.  
Menu setting and the exact operating procedures for  
using the disc menu may differ depending on the disc.  
Follow the instructions on each menu screen.  
You also may set PBC to Off under setup. See page  
13.  
Notes  
If Parental Control is set and the disc is not within the  
Rating settings (not authorized), the 4-digit code must  
be entered and/or the disc must be authorized (see  
Parental Control, on page 14).  
DVDs may have a region code.  
Your player will not play discs that have a region code  
different from your player. The region code for this  
player is 2 (two).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD, Video CD and Audio CD (Continued)  
VCD2.0  
VCD1.1  
Slow Motion DVD  
General Features  
1 Press SLOW t or T during playback.  
The player will enter SLOW mode.  
Note  
2 Use the SLOW t or T to select the required speed:  
t 1/16, t 1/8, t 1/4 or t 1/2 (reverse), or T  
1/16, T 1/8, T 1/4 or T 1/2 (forward).  
Unless stated otherwise, all operations described use  
the remote control. Some features may also be  
available from the Setup menu.  
3 To exit slow motion mode, press PLAY.  
1/3  
Moving to another TITLE DVD  
Note  
Slow motion playback in reverse is not available from a  
Video CD.  
When a disc has more than one title, you can select to  
another title as follows:  
Press DISPLAY when playback is stopped. From the  
title function, press the appropriate numbered button  
(0-9) to select a title number.  
VCD2.0  
VCD1.1  
Search DVD  
CD  
1 Press SCAN m or M during playback.  
The player will now go into SEARCH mode.  
Moving to another CHAPTER/TRACK  
2 Press SCAN m or M repeatedly to select the  
required speed: mX2, mX4, mX16, mX100  
(backward) or MX2, MX4, MX16, MX100  
(forward).  
With a Video CD and Audio CD, the Search speed  
changes: mX2, mX4, mX8 (backward) or  
MX2, MX4, MX8 (forward).  
1/12  
1/3  
VCD1.1  
DVD  
CD  
When a title on a disc has more than one chapter or a  
disc has more than one track, you can move to another  
chapter/track as follows:  
Press SKIP . or > briefly during playback to  
select the next chapter/track or to return to the begin-  
ning of the current chapter/track.  
3 To exit SEARCH mode, press PLAY.  
VCD1.1  
Random Karaoke DVD  
CD  
Press SKIP . twice briefly to step back to the pre-  
vious chapter/track.  
1 Press RANDOM during playback or in stop mode.  
The unit automatically begins Random Playback and  
RANDOM (1-3)appears on the TV screen.  
To go directly to any chapter during DVD playback,  
press DISPLAY. Then, press 3/4to select C (chapter)  
(or for a Video CD and Audio CD, select T for track).  
Then, enter the chapter/track number using the num-  
bered buttons (0-9).  
RANDOM1: Plays all the tracks on a single disc in random  
order and then stops.  
RANDOM2: Plays all the tracks on current disc in  
random order and then plays all the tracks on each suc-  
ceeding disc in random order and then stops.  
RANDOM3: Plays 2 tracks randomly from a disc and then  
plays 2 tracks randomly from a different disc until all  
tracks on all discs have been played.  
Note  
For two-digit numbers, press the buttons in rapid  
succession.  
2 To return to normal playback, press RANDOM until  
RANDOMdisappears on the display window.  
Still Picture and Frame-by-frame playback  
VCD2.0  
VCD1.1  
DVD  
1 Press PAUSE/STEP during playback.  
The player will now go into PAUSE mode.  
2 You can advance the picture frame by frame by  
pressing PAUSE/STEP repeatedly on the remote  
control.  
Tip  
By pressing SKIP . or > during Random play-  
back, the unit selects another title (track) and resumes  
Random playback.  
Note  
CD  
Pause  
This function works only with Compact Discs, Karaoke  
discs and video CD without PBC.  
1 Press PAUSE/STEP during playback.  
2 To return to playback, press PLAY or press  
PAUSE/STEP again.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD, Video CD and Audio CD (Continued)  
General Features (contd)  
0:16:57  
- : - - : - -  
Time Search DVD  
VCD2.0  
VCD1.1  
Repeat DVD  
CD  
The Time Search function allows you to start playing at  
any elapsed time location on the disc.  
DISC  
ALL  
TRACK  
OFF  
CHAPT  
TITLE  
1 Press DISPLAY during playback. The on-screen dis-  
DVD Video Discs - Repeat Chapter/Title/Off  
play appears on the screen.  
The Time Search box shows the elapsed playing time of the  
current disc.  
1
To repeat the chapter currently playing, press REPEAT.  
The Repeat Chapter icon appears on the TV screen.  
2 Within 10 seconds, press 3/4to select the Time  
Search icon in the on-screen display.  
The -:--:--appears in the Time Search box.  
2 To repeat the title currently playing, press REPEAT a  
second time.  
The Repeat Title icon appears on the TV screen.  
3 Within 10 seconds, use the number buttons to enter  
the required start time. Enter hours, minutes and sec-  
3 To exit Repeat mode, press REPEAT a third time.  
The Repeat Off icon appears on the TV screen.  
onds from left to right in the box.  
If you enter the wrong numbers, press CLEAR to remove the  
numbers you entered. Then enter the correct numbers.  
Video CDs and Audio CDs - Repeat Track/Disc/All/Off  
1 To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the TV screen.  
4
Within 10 seconds, press SELECT/ENTER to confirm the  
start time.  
2 To repeat the disc currently playing, press REPEAT a  
second time.  
The Repeat Disc icon appears on the TV screen.  
Playback starts from the selected time on the disc. If you  
enter an invalid time, playback will continue from the current  
point.  
3 To Repeat of entire all disc contents, press REPEAT a  
third time.  
The Repeat All icon appears on the TV screen.  
NORM.  
3D SUR  
3D Surround DVD  
4 To exit Repeat mode, press REPEAT a fourth time.  
The Repeat Off icon appears on the TV screen.  
This unit can produce a 3D Surround effect, which  
simulates multi-channel audio playback from two  
conventional stereo speakers, instead of the five or  
more speakers normally required to listen to multi-  
channel audio from a home theater system.  
Note  
On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use the Repeat function. See page 13.  
1 Press SOUND to select 3D SURduring playback.  
2 To turn off the 3D Surround effect, press SOUND  
again to select NORM.  
VCD2.0  
VCD1.1  
Repeat A-B DVD  
CD  
A
*
A
B
OFF  
VCD2.0  
VCD1.1  
Zoom DVD  
To repeat a sequence in a title:  
The Zoom function allows you to expand the video  
image and to move the focus point of zoomed image.  
1 Press A-B at your chosen starting point.  
A- appears briefly on the TV screen.  
1 Press ZOOM during playback or still playback to acti-  
vate the Zoom function.  
2 Press A-B again at your chosen end point.  
A-B appears briefly on the TV screen, and the repeat sequence  
begins (a-b repeat appears on the players display).  
If you press ZOOM repeatedly, the magnification level  
increases up to six times.  
3 To cancel the sequence, press A-B.  
2 Use the 1/2/3/4buttons to move the focus point off  
the zoomed image.  
3 Press CLEAR to resume normal playback or return to  
the paused image.  
Notes  
The zoom function may not work for some DVDs.  
The zoom function may not work on multi-angle  
scenes.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD, Video CD and Audio CD (Continued)  
General Features (contd) Special DVD Features  
DVD  
VCD2.0  
VCD1.1  
DVD  
CD  
Marker Search  
Checking the contents of DVD Video  
discs: Menus  
MARKER SEARCH  
1/9  
DVDs may contain menus that allow you to access spe-  
cial features. To access the disc menu, press MENU.  
Then, press the appropriate number button to select an  
option. Or, use the 1/2/3/4 buttons to highlight your  
selection, then press SELECT/ENTER.  
You can start playback from a memorized point. Up to  
nine points can be memorized.  
To enter a mark, follow these steps.  
1 During disc playback, press MARKER at the location  
you want to memorize.  
The Marker icon will appear on the TV screen briefly.  
DVD  
Title Menu  
2
Repeat step 1 to enter up to nine Marker points on a disc.  
1 Press TITLE.  
To Recall a Marked Scene  
If the current title has a menu, that menu will appear on the  
screen. Otherwise, the disc menu may appear.  
1 During disc playback, press SEARCH.  
The MARKER SEARCH menu will appear on the screen.  
2 The menu can list camera angles, spoken language  
and subtitle options, and chapters for the title.  
2 Within 10 seconds, press 1/2 to select a Marker num-  
ber that you want to recall.  
3 To remove the title menu, press TITLE again.  
3 Press SELECT/ENTER.  
Playback will start from the Marked scene.  
DVD  
Disc Menu  
4 To remove the MARKER SEARCH menu, press  
SEARCH.  
1 Press MENU.  
The disc menu is displayed.  
2 To exit the disc menu, press MENU again.  
To clear a Marked Scene  
1 During disc playback, press SEARCH.  
1/1  
DVD  
The MARKER SEARCH menu will appear on the screen.  
Camera Angle  
2 Press 1/2 to select the Marker number that you want  
If the disc contains scenes recorded at different camera  
angles, you can change to a different camera angle  
during playback.  
Press ANGLE repeatedly during playback to select a  
desired angle.  
to erase.  
3 Press CLEAR.  
The Marker number will be erased from the list.  
4 Repeat steps 2 and 3 to erase additional Marker  
numbers.  
The number of the current angle appears on the display.  
5
To remove the MARKER SEARCH menu, press SEARCH.  
DVD  
Changing the Audio Language  
Note  
1
ENG  
D
All disc markers are cleared when the power is turned  
6
CH  
off or the disc is removed.  
Press AUDIO repeatedly during playback to hear different  
audio languages or audio tracks available on the disc.  
Changing the Audio Channel  
RIGHT  
STER.  
LEFT  
VCD  
CD  
Press AUDIO repeatedly during playback to hear a dif-  
ferent audio channel (STEREO, LEFT or RIGHT).  
1
ENG  
DVD  
Subtitles  
Press SUBTITLE repeatedly during playback to view  
the different subtitle languages available on the disc.  
Note  
If  
appears, the feature is not available on the disc.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmed Playback with Video CD and Audio CD  
Programmed Playback with Video CD  
and Audio CD  
Repeat Programmed Tracks/All  
To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the menu screen.  
To repeat all tracks on the program list, press  
REPEAT a second time.  
The Repeat All icon appears on the menu screen.  
To cancel Repeat mode, press REPEAT a third time.  
The Repeat Off icon appears on the menu screen.  
Note  
On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use the Program function. See page 13.  
Insert a Video CD or Audio CD and close the  
1
2
tray.  
To resume normal playback from programmed  
playback  
Press and hold PROGRAM until PROG.indicator dis-  
Press PROGRAM while playback is stopped.  
The Program menu will appear.  
Program  
appears in the display window.  
Step  
1
1
Erasing a Track from Program List  
1 Press PROGRAM while playback is stopped.  
The Program menu will appear.  
Clear All  
2 Use 1/2/3/4 to select the track that you wish to erase  
from the Program list.  
3 Press CLEAR.  
The track will be erased from the Program list.  
Note  
Press PROGRAM or RETURN to exit the Program  
menu.  
Erasing the Complete Program List  
Enter the disc number using the numerical keys  
(1-5) and then press SELECT/ENTER.  
1 Press PROGRAM while playback is stopped.  
The Program menu will appear.  
2 Use 1/2/3/4 to select Clear All, then press  
SELECT/ENTER.  
The complete Program for the disc will be erased.  
The programs are also cleared when the disc is removed.  
3
4
Enter the track number using the numerical  
keys (0-9) and then press SELECT/ENTER.  
The next area is selected.  
Repeat steps 3 to 4.  
Up to 20 tracks can be programmed.  
5
Press PLAY to exit the menu.  
The selected tracks are stored in the player memory and  
playback begins with the first programmed sequence.  
6
After playback of all programmed tracks is com-  
pleted, playback is stopped  
7
Tip  
After playback of all programmed tracks is completed,  
playback is stopped.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with MP3 Disc  
Playing an MP3 disc  
Notes on MP3 Discs  
About MP3  
The DVD Player can play MP3 formatted recordings on  
CD-ROM, CD-R or CD-RW discs.  
An MP3 file is audio data compressed by using the  
MPEG1 audio layer-3 file-coding scheme. We call  
files that have the .mp3file extension MP3 files.  
The player can not read an MP3 file that has a file  
extension other than .mp3.  
Before playing MP3 recordings, read the notes on MP3  
Recordings on right.  
Insert a disc and close the tray.  
1
The menu appears on the TV screen.  
The player can not read a non MP3 encoded file that  
has a file extension .mp3.  
MP3  
Program  
TRACK 1.MP3  
TRACK 2.MP3  
TRACK 3.MP3  
TRACK 4.MP3  
TRACK 5.MP3  
TRACK 6.MP3  
TRACK 7.MP3  
TRACK 8.MP3  
MP3 Disc compatibility with this player is limit-  
ed as follows:  
1. Sampling Frequency / only at 44.1kHz  
2. Bit rate / within 32 - 320kbps  
Clear All  
OFF  
00:00  
1
3. CD-R physical format should be ISO 9660”  
4. If you record MP3 files using the software which  
cannot create a FILE SYSTEM, for example Direct-  
CDetc., it is impossible to playback MP3 files. We  
recommend that you use Easy-CD Creator, which  
creates an ISO9660 file system.  
5. A single session disc requires MP3 files in the first  
track. If there is no MP3 file in the 1st track, it can-  
not playback MP3 files. If you wish to playback MP3  
files, format all the data in the disc or use a new  
one.  
6. We do not recommend using CD-RW discs. Please  
use finished CD-R discs only.  
7. File names should be named using 8 letters or less  
and must incorporate .mp3extension  
e.g. ********.MP3.  
MP3 menu  
Press 3/4to select a track then press PLAY.  
Playback starts.  
During playback, the current tracks elapsed playing  
time will appear on the display.  
2
Playback will stop at the end of the disc.  
3 To stop playback at any other time, press STOP.  
MP3  
Pause  
1 Press PAUSE/STEP during playback.  
2 To return to playback, press PLAY or press  
PAUSE/STEP again.  
MP3  
8. Do not use special letters such as _?!><+*}{`[@  
]:;\/.,etc.  
9. Total number of files on the disc should be less than  
200.  
10. Use 74 minute CD-R discs (650M), Do not use 80  
minute CD-R (700M) software  
Moving to another Track  
Press SKIP . or > once during playback to  
advance to the next track or to return to the beginning  
of the current track.  
Press SKIP . twice briefly to step back to the pre-  
vious track.  
This DVD player requires discs/recordings to meet  
certain technical standards in order to achieve optimal  
playback quality. Pre-recorded DVDs are automatically  
set to these standards. There are many different types  
of recordable disc formats (including CD-R containing  
MP3 files). That require certain pre-existing conditions  
(see above) to insure compatible playback.  
MP3  
Repeat Track/All/Off  
1 To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the menu screen.  
2 To repeat all tracks on a disc, press REPEAT a sec-  
ond time.  
The Repeat All icon appears on the menu screen.  
3 To cancel Repeat mode, press REPEAT a third time.  
The Repeat Off icon appears on the menu screen.  
Customers should also note that permission is  
required in order to download MP3 files and music  
from the Internet. NAD cannot grant such  
permission. Permission should always be sought  
from the copyright owner.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmed Playback with MP3 Disc  
Repeat Programmed Tracks/All  
Programmed Playback with MP3 Disc  
To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the menu screen.  
To repeat all tracks on the program list, press  
REPEAT a second time.  
Program allows you to store your favorite tracks for a  
particular disc in the player memory.  
Program can contain 60 tracks.  
The Repeat All icon appears on the menu screen.  
To cancel Repeat mode, press REPEAT a third time.  
The Repeat Off icon appears on the menu screen.  
Insert the disc and close the tray.  
The menu is displayed on the TV screen.  
1
2
Press PROGRAM during playback or in the stop  
mode to enter the Program Edit mode.  
Erasing a Track from Program List  
1 Press PROGRAM during playback or in the stop  
mode to enter the Program Edit mode.  
E
The  
mark will appear to the right of the word Program  
on the right side of the menu screen.  
E
The  
mark will appear.  
2 Press 2 to move to the Program list.  
3 Use 3/4to select the track that you wish to erase  
from the Program list.  
4 Press CLEAR.  
The track will be erased from the Program list.  
Note  
Press PROGRAM to exit the Program Edit mode;  
E
the  
mark will disappear.  
Press 3/4to select a track then press  
SELECT/ENTER to place the selected track on  
the Program list.  
3
Erasing the Complete Program List  
1 Follow steps 1-2 of Erasing a Track from Program  
Listas above.  
2 Use 3/4to select Clear All, then press  
SELECT/ENTER.  
Repeat step 3 to place additional tracks on the  
Program list.  
4
MP3  
Program  
E
TRACK 1.MP3  
TRACK 8.MP3  
TRACK 2.MP3  
TRACK 4.MP3  
TRACK 3.MP3  
The complete Program for the disc will be erased.  
The programs are also cleared when the disc is removed.  
TRACK 2.MP3  
TRACK 3.MP3  
TRACK 4.MP3  
TRACK 5.MP3  
TRACK 6.MP3  
TRACK 7.MP3  
TRACK 8.MP3  
To resume normal playback from programmed  
playback  
Clear All  
OFF  
00:00  
1
Press and hold PROGRAM for 3 seconds until PROG.”  
indicator disappears in the display window.  
MP3 menu  
Press 2.  
The programmed track you selected last is highlighted on  
the program list.  
5
6
Press 3/4to select the track you want to start  
playing.  
Press TITLE to move to the next page.  
Press MENU to move to the previous page.  
Press PLAY to start.  
Playback begins in the order in which you programmed the  
tracks and PROG.appears in the display window.  
Playback stops after all of the tracks on the Program list  
have played once.  
7
Note  
The programmed tracks are cleared when the power is  
turned off or the disc is removed.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Last Condition Memory  
VCD1.1  
DVD  
CD  
This player memorizes the last condition for the last  
disc you have watched. Settings remain in memory  
even if you remove the disc from the player or switch off  
the player. If you load a disc that has its settings memo-  
rized, the latest stop position is automatically recalled.  
Notes  
Settings are stored in memory for use any time.  
This player does not memorize settings of a disc if  
you switch off the player before commencing playback.  
Screen Saver  
A screen saver image appears when you leave the DVD  
Player in stop mode for about five minutes.  
After the Screen Saver has been engaged for about five  
minutes, the DVD Player will automatically turn itself off.  
VCD2.0  
VCD1.1  
Video Mode Setting DVD  
With certain discs, the playback picture may be flick-  
ering or Dot Crawl is shown on straight lines. That  
means Vertical interpolation or De-interlace is not  
perfectly matched with the disc. In this case, the  
picture quality may be improved by changing the  
video mode.  
To change the video mode, press and hold  
DISPLAY about 3 seconds during disc playback. The  
new video mode number selected is displayed on the  
TV screen. Check whether the video quality has  
improved. If not, repeat the above procedure until pic-  
ture quality is improved.  
Video mode change sequence:  
MODE1 MODE2 MODE3 MODE4 →  
MODE5 MODE1  
If you turn off the power, the video mode will return to  
initial default state (Auto).  
HDCD Playback  
HDCD is a process that increases the fidelity of both  
specially encoded HDCD discs and standard CD audio  
discs. When an HDCD-encoded disc is playing, the spe-  
cial decoder is automatically activated and the HDCD  
Indicator lights. No user intervention is required.  
To enjoy the benefits of HDCD, your DVD Player must  
be connected to your A/V receiver via the Analog Audio  
Outputs. However, if your A/V receiver or surround  
processor is equipped with built-in HDCD decoding, you  
may also use a Coaxial or Optical digital audio connec-  
tion so that the HDCD processing is done there.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Cause  
Correction  
Symptom  
No power.  
The power cord is disconnected.  
Plug the power cord into the wall outlet  
securely.  
No disc is inserted.  
Insert a disc. (Check that the DVD or,  
audio CD indicator in the display  
window is lit.)  
The power is on, but  
the DVD player does  
not work.  
The TV is not set to receive DVD signal Select the appropriate video input mode  
No picture.  
output.  
on the TV so the picture from the DVD  
player appears on the TV screen.  
The video cable is not connected  
securely.  
Connect the video cable into the jacks  
securely.  
The connected TV power is turned off.  
Turn on the TV.  
No sound.  
The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD player.  
The audio cables are not connected  
securely.  
Connect the audio cable into the jacks  
securely.  
The power of the equipment connected  
with the audio cable is turned off.  
Turn on the equipment connected with  
the audio cable.  
The Digital Audio Output is set to the  
wrong position.  
Set the Digital Audio Output to the  
correct position, then turn on the DVD  
player again by pressing POWER.  
The playback picture is The disc is dirty.  
Clean the disc.  
poor.  
No disc is inserted.  
Insert a disc. (Check that the DVD, or  
audio CD indicator in the DVD display is  
lit.)  
The DVD player does  
not start playback.  
An unplayable disc is inserted.  
Insert a playable disc. (Check the disc  
type, color system and Regional code.)  
The disc is placed upside down.  
The disc is not placed within the guide.  
Place the disc with the playback side  
down.  
Place the disc on the disc tray correctly  
inside the guide.  
The disc is dirty.  
Clean the disc.  
The Rating level is set.  
Cancel the Rating function or change  
the rating level.  
The remote control  
does not work properly.  
The remote control is not pointed at the  
remote sensor of the DVD player.  
Point the remote control at the remote  
sensor of the DVD player.  
The remote control is too far from the  
DVD player.  
Operate the remote control within about  
23 ft (7 m).  
There is an obstacle in the path of the  
Remove the obstacle.  
remote control and the DVD player.  
The batteries in the remote control are  
Replace the batteries with new ones.  
exhausted.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Code List  
Enter the appropriate code number for the initial settings Disc Audio, Disc Subtitleand/or Disc Menu”  
(See page 12).  
Code Language  
6565 Afar  
Code Language  
7079 Faroese  
7082 French  
7089 Frisian  
Code Language  
7678 Lingala  
Code Language  
8375 Slovak  
8376 Slovenian  
8377 Samoan  
8378 Shona  
8379 Somali  
8381 Albanian  
8382 Serbian  
8385 Sudanese  
8386 Swedish  
8387 Swahili  
8465 Tamil  
6566 Abkhazian  
6570 Afrikaans  
6577 Ameharic  
6582 Arabic  
7679 Laothian  
7684 Lithuanian  
7686 Latvian, Lettish  
7771 Malagasy  
7773 Maori  
7165 Irish  
7168 Scots Gaelic  
7176 Galician  
7178 Guarani  
7185 Gujarati  
7265 Hausa  
6583 Assamese  
6588 Aymara  
6590 Azerbaijani  
6665 Bashkir  
6669 Byelorussian  
6671 Bulgarian  
6672 Bihari  
7775 Macedonian  
7776 Malayalam  
7778 Mongolian  
7779 Moldavian  
7782 Marathi  
7273 Hindi  
7282 Croatian  
7285 Hungarian  
7289 Armenian  
7365 Interlingua  
7378 Indonesian  
7383 Icelandic  
7384 Italian  
7783 Malay  
8469 Telugu  
8471 Tajik  
6678 Bengali; Bangla  
6679 Tibetan  
6682 Breton  
7784 Maltese  
7789 Burmese  
7865 Nauru  
8472 Thai  
8473 Tigrinya  
8475 Turkmen  
8476 Tagalog  
8479 Tonga  
8482 Turkish  
8484 Tatar  
6765 Catalan  
6779 Corsican  
6783 Czech  
7869 Nepali  
7876 Dutch  
7387 Hebrew  
7465 Japanese  
7473 Yiddish  
7487 Javanese  
7565 Georgian  
7575 Kazakh  
7576 Greenlandic  
7577 Cambodian  
7578 Kannada  
7579 Korean  
7583 Kashmiri  
7585 Kurdish  
7589 Kirghiz  
7879 Norwegian  
7982 Oriya  
6789 Welsh  
6865 Danish  
6869 German  
6890 Bhutani  
6976 Greek  
8065 Panjabi  
8076 Polish  
8487 Twi  
8083 Pashto, Pushto  
8084 Portuguese  
8185 Quechua  
8277 Rhaeto-Romance  
8279 Rumanian  
8285 Russian  
8365 Sanskrit  
8368 Sindhi  
8575 Ukrainian  
8582 Urdu  
6978 English  
6979 Esperanto  
6983 Spanish  
6984 Estonian  
6985 Basque  
7065 Persian  
7073 Finnish  
7074 Fiji  
8590 Uzbek  
8673 Vietnamese  
8679 Volapük  
8779 Wolof  
8872 Xhosa  
8979 Yoruba  
9072 Chinese  
9085 Zulu  
8372 Serbo-Croatian  
8373 Singhalese  
7665 Latin  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Country Code List  
Enter the appropriate code number for the initial setting Country Code(See page 14).  
Code Country  
Code Country  
Code Country  
Code Country  
AD  
AE  
AF  
AG  
AI  
Andorra  
ER  
ES  
ET  
FI  
Eritrea  
Spain  
Ethiopia  
Finland  
LC  
LI  
LK  
LR  
LS  
LT  
LU  
LV  
Saint Lucia  
Liechtenstein  
Sri Lanka  
Liberia  
Lesotho  
Lithuania  
Luxembourg  
Latvia  
Libya  
Morocco  
Monaco  
SC  
SD  
SE  
SG  
SH  
SI  
Seychelles  
Sudan  
Sweden  
Singapore  
Saint Helena  
Slovenia  
Svalbard and Jan Mayen  
Islands  
Slovak Republic  
Sierra Leone  
San Marino  
Senegal  
Somalia  
Suriname  
Saint Tome and Principe  
Former USSR  
El Salvador  
Syria  
Swaziland  
Turks and Caicos Islands  
Chad  
French Southern  
Territories  
Togo  
Thailand  
Tadjikistan  
Tokelau  
Turkmenistan  
Tunisia  
Tonga  
East Timor  
Turkey  
Trinidad and Tobago  
Tuvalu  
Taiwan  
Tanzania  
United Arab Emirates  
Afghanistan  
Antigua and Barbuda  
Anguilla  
Albania  
Armenia  
Netherlands Antilles  
Angola  
Antarctica  
Argentina  
American Samoa  
Austria  
Australia  
FJ  
Fiji  
AL  
FK  
FM  
FO  
FR  
FX  
Falkland Islands  
Micronesia  
Faroe Islands  
France  
France (European  
Territory)  
Gabon  
Great Britain  
Grenada  
Georgia  
French Guyana  
Ghana  
Gibraltar  
Greenland  
Gambia  
AM  
AN  
AO  
AQ  
AR  
AS  
AT  
AU  
AW  
AZ  
BA  
BB  
BD  
BE  
BF  
BG  
BH  
BI  
SJ  
LY  
SK  
SL  
SM  
SN  
SO  
SR  
ST  
SU  
SV  
SY  
SZ  
TC  
TD  
TF  
MA  
MC  
MD  
MG  
MH  
MK  
ML  
MM  
MN  
MO  
MP  
MQ  
MR  
MS  
MT  
MU  
MV  
GA  
GB  
GD  
GE  
GF  
GH  
GI  
GL  
GM  
GN  
GP  
GQ  
GR  
GS  
Moldavia  
Madagascar  
Marshall Islands  
Macedonia  
Mali  
Myanmar  
Mongolia  
Aruba  
Azerbaidjan  
Bosnia-Herzegovina  
Barbados  
Bangladesh  
Belgium  
Burkina Faso  
Bulgaria  
Bahrain  
Burundi  
Benin  
Bermuda  
Brunei Darussalam  
Bolivia  
Brazil  
Bahamas  
Bhutan  
Bouvet Island  
Botswana  
Belarus  
Belize  
Canada  
Cocos (Keeling) Islands  
Central African Republic  
Congo  
Switzerland  
Ivory Coast  
Cook Islands  
Chile  
Cameroon  
China  
Colombia  
Costa Rica  
Former Czechoslovakia  
Cuba  
Cape Verde  
Christmas Island  
Cyprus  
Czech Republic  
Germany  
Djibouti  
Denmark  
Dominica  
Dominican Republic  
Algeria  
Ecuador  
Estonia  
Egypt  
Western Sahara  
Macau  
Northern Mariana Islands  
Martinique (French)  
Mauritania  
Montserrat  
Malta  
Guinea  
Guadeloupe (French)  
Equatorial Guinea  
Greece  
S. Georgia & S. Sandwich  
Isls.  
Guatemala  
Guam (USA)  
Guinea Bissau  
Guyana  
Hong Kong  
Heard and McDonald  
Islands  
Honduras  
Croatia  
Haiti  
Hungary  
Indonesia  
Ireland  
Israel  
India  
British Indian Ocean  
Territory  
Iraq  
Iran  
Iceland  
Italy  
Jamaica  
TG  
TH  
TJ  
TK  
TM  
TN  
TO  
TP  
TR  
TT  
TV  
TW  
TZ  
UA  
UG  
UK  
UM  
BJ  
Mauritius  
Maldives  
BM  
BN  
BO  
BR  
BS  
BT  
BV  
BW  
BY  
BZ  
CA  
CC  
CF  
CG  
CH  
CI  
CK  
CL  
CM  
CN  
CO  
CR  
CS  
CU  
CV  
CX  
CY  
CZ  
DE  
DJ  
GT  
GU  
GW  
GY  
HK  
HM  
MW Malawi  
MX  
MY  
MZ  
NA  
NC  
NE  
NF  
NG  
NI  
NL  
NO  
NP  
NR  
NU  
NZ  
OM  
PA  
PE  
PF  
PG  
PH  
PK  
PL  
PM  
PN  
PR  
PT  
PW  
PY  
QA  
RE  
RO  
RU  
RW  
SA  
SB  
Mexico  
Malaysia  
Mozambique  
Namibia  
New Caledonia (French)  
Niger  
Norfolk Island  
Nigeria  
Nicaragua  
Netherlands  
Norway  
Nepal  
Nauru  
Niue  
New Zealand  
Oman  
Panama  
Peru  
Polynesia (French)  
Papua New Guinea  
Philippines  
Pakistan  
HN  
HR  
HT  
HU  
ID  
IE  
IL  
IN  
IO  
Ukraine  
Uganda  
United Kingdom  
USA Minor Outlying  
Islands  
United States  
Uruguay  
Uzbekistan  
Vatican City State  
Saint Vincent &  
Grenadines  
Venezuela  
Virgin Islands (British)  
Virgin Islands (USA)  
Vietnam  
Vanuatu  
Wallis and Futuna Islands  
Samoa  
Yemen  
Mayotte  
Yugoslavia  
South Africa  
Zambia  
Zaire  
Zimbabwe  
US  
UY  
UZ  
VA  
VC  
IQ  
IR  
IS  
IT  
JM  
JO  
JP  
KE  
KG  
KH  
KI  
KM  
KN  
KP  
KR  
KW  
KY  
KZ  
LA  
LB  
VE  
VG  
VI  
Jordan  
Japan  
Kenya  
Poland  
Saint Pierre and Miquelon  
Pitcairn Island  
Puerto Rico  
Portugal  
Palau  
Paraguay  
Qatar  
Reunion (French)  
Romania  
Russian Federation  
Rwanda  
Saudi Arabia  
Solomon Islands  
VN  
VU  
WF  
WS  
YE  
YT  
YU  
ZA  
ZM  
ZR  
ZW  
Kyrgyzstan  
Cambodia6  
Kiribati  
Comoros  
Saint Kitts & Nevis Anguilla  
North Korea  
South Korea  
Kuwait  
DK  
DM  
DO  
DZ  
EC  
EE  
EG  
EH  
Cayman Islands  
Kazakhstan  
Laos  
Lebanon  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Power requirements  
Power consumption  
Dimensions (approx.)  
Mass (approx.)  
AC 120V , 60 Hz  
16W  
430 X 118 X 408 mm (16.9 x 4.7 x 16.1 inches) (w x h x d)  
5.7 kg (12.6 lbs)  
Operating temperature  
Operating humidity  
5˚C to 40˚C (41˚F to 104˚F)  
5 % to 90 %  
System  
Laser  
Semiconductor laser, wavelength 650 nm  
PAL/NTSC  
Signal system  
Frequency response  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100dB (ANALOG OUT connectors only)  
Less than 0.008%  
More than 100 dB (DVD)  
More than 95 dB (CD)  
Outputs  
VIDEO OUT  
S-VIDEO OUT  
1 Vp-p 75 , sync negative, RCA jack x 1/SCART(TO TV)  
(Y) 1.0 V (p-p), 75 , negative sync., Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 Ω  
Audio output (digital audio)  
Audio output (optical audio)  
Audio output (analog audio)  
0.5 V (p-p), 75 , RCA jack x 1  
5 V (p-p), 75 , Optical connector x 1  
2.0 Vrms (1 KHz, 0 dB), 330 , RCA jack (L, R) x 1/SCART(TO TV)  
Accessory  
Video cable . . . . . . . . . . . . . . . . . . . . . . .1  
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1  
Remote control . . . . . . . . . . . . . . . . . . . .1  
Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2  
Design and specifications are subject to change without notice.  
Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories.  
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.  
DTSand DTS Digital Outare trademarks of Digital Theater Systems, Inc.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P/NO: 3834RS?????  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Clothes Dryer T 4839 Ci User Manual
Miglia Technology Universal Remote Infrared Remote Control User Manual
National Instruments Network Card NI PXI 7811R User Manual
Navman GPS Receiver SmartST Professional User Manual
Nesco Electric Steamer ST 25 User Manual
Nortel Networks Telephone Enterprise Edge Feature Programming Telephone User Manual
NuTone Automobile Parts 834 User Manual
NuTone Patio Heater 9114NT User Manual
Panasonic Air Conditioner HQ 2051TH User Manual
ParaBody Home Gym PBF011 User Manual