NAD DVD Player T 513 User Manual

®
T 513  
DVD / CD / MP3 Player  
Owners Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
SAFETY PRECAUTIONS  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR  
MOISTURE  
NOTES ON COPYRIGHT  
It is forbidden by law to copy, broadcast, show, broadcast via cable, play  
in public, or rent copyright material without permission. This product is  
equipped with copy protection measures developed by Macrovision.  
Copy protection signals are recorded on some discs. When recording  
these discs on a VCR, picture noise will appear during playback. This  
product incorporates copyright protection technology that is protected  
by certain U.S. patent claims and other intellectual property rights  
owned by Macrovision Corporation and other rights owners. Use of this  
copyright protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited viewing uses  
only unless otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
CAUTION  
THIS DVD PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE  
OF THIS PRODUCT, PLEASE READ THIS OWNER’S MANUAL CAREFULLY  
AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE  
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.  
USE OF CONTROLS, ADJUSTMENTS TO MODIFY PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO  
OPEN THE ENCLOSURE. VISIBLE LASER RADIATION EXISTS WHEN THE  
ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.  
RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN  
SEE IT)  
The model and serial number of your new DVD player are located on  
the back of the DVD player cabinet. For your future convenience, we  
suggest that you record these numbers here:  
THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR  
SPLASHING, AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,  
SHOULD NEVER BE PLACED ON THE APPARATUS.  
MODEL NO.____________________________  
SERIAL NO.____________________________  
WARNING: CHANGES OR MODIFICATIONS NOT  
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR  
COMPLIANCE COULD VOID THE USER’S AUTHORITY TO  
OPERATE THE EQUIPMENT.  
This product is manufactured to comply with the radio interference  
requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.  
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited  
Copyright 2003, NAD Electronics International, a division of Lenbrook Industries Limited  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
TABLE OF CONTENTS  
INTRODUCTION  
OPERATION  
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Types of video CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Precautions for handling the unit . . . . . . . . . . . . . . . . . . . . . . . . 5  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Front Panel and Display Window . . . . . . . . . . . . . . . . . . . . . . . .7  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Operation with DVD and Video CD . . . . . . . . . . . . . . . . . . . . .17  
Playing a DVD and Video CD . . . . . . . . . . . . . . . . . . . . . . . . . 17  
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Special DVD Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Operation with Audio CD and MP3 / WMA Disc . . . . . . . . . . .20  
Playing an Audio CD and MP3 / WMA Disc . . . . . . . . . . . . . . . 20  
Notes on MP3/WMA Recordings . . . . . . . . . . . . . . . . . . . . . . . 20  
Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Programmed Playback  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
PREPARATION  
REFERENCE  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Connecting to Optional Equipment . . . . . . . . . . . . . . . . . . . . . 10  
Before Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
General Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Speaker selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Table of Languages and Their Abbreviations . . . . . . . . . . . . . .26  
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
BEFORE USE  
PLAYABLE DISCS  
TRACK (VIDEO CD AND AUDIO CD ONLY)  
Sections of a picture or a musical piece on a video CD or an audio CD.  
Each track is assigned a track number, enabling you to locate the track  
you want.  
DVD video discs  
(8 cm / 12 cm disc)  
Video CD (VCD)  
(8 cm / 12 cm disc)  
SCENE  
On a video CD with PBC (Playback control) functions, moving pictures  
and still pictures are divided into sections called “Scenes”. Each scene is  
displayed in the menu screen and assigned a scene number, enabling  
you to locate the scene you want. A scene is composed of one or several  
tracks.  
Audio CD  
(8 cm / 12 cm disc)  
In addition, this unit can play a DVD-R, DVD RW, Kodak PICTURE CD,  
SVCD, and CD-R or CD-RW that contains audio titles, MP3, WMA or  
JPEG files.  
TYPES OF VIDEO CDS  
There are two types of video CDs:  
NOTES  
Depending on the conditions of the recording equipment or the CD-  
R/RW (or DVD-R/ RW) disc itself, some CD-R/RW (or DVD-R/ RW)  
discs cannot be played on the unit.  
Video CDs equipped with PBC (Version 2.0)  
PBC (Playback control) functions allow you to interact with the system  
via menus, search functions, or other typical computer-like operations.  
Moreover, still pictures of high resolution can be played if they are  
included in the disc.  
Do not attach any seal or label to either side (the labeled side or the  
recorded side) of a disc.  
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal).  
It may result in malfunctions.  
Video CDs not equipped with PBC (Version 1.1)  
Operated in the same way as audio CDs, these discs allow playback of  
video pictures as well as sound, but they are not equipped with PBC.  
NOTES ON DVDS AND VIDEO CDS  
Some playback operations of DVDs and Video CDs may be intentionally  
fixed by software manufacturers.  
As this unit plays DVDs and Video CDs according to disc content  
designed by the software manufacturer, some playback features of the  
unit may not be available or other functions may be added.  
Refer also to the instructions supplied with the DVDs and Video CDs.  
Some DVDs made for business purposes may not be played on the unit.  
REGIONAL CODE OF THE DVD PLAYER AND DVDS  
This DVD player is designed and manufactured for playback of  
region “1” encoded DVD software.  
1
The region code on the labels of some DVD discs indicates  
which type of player can play those discs. This unit can play only DVD  
discs labeled “1” or “ALL”. If you try to play any other discs, the  
message “Check Regional Code” will appear on the TV screen. Some  
DVD discs may not have a region code label even though their playback  
is prohibited by area limits.  
DISC-RELATED TERMS  
TITLE (DVD VIDEO DISCS ONLY)  
The main film content, accompanying feature content, additional  
feature content, or music album. Each title is assigned a title reference  
number enabling you to locate it easily.  
CHAPTER (DVD VIDEO DISCS ONLY)  
Sections of a picture or a musical piece that are smaller than titles. A title  
is composed of one or several chapters. Each chapter is assigned a  
chapter number, enabling you to locate the chapter you want.  
Depending on the disc, chapters may not be recorded.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
BEFORE USE  
PRECAUTIONS FOR HANDLING THE UNIT  
WHEN SHIPPING THE UNIT  
The original shipping carton and packing materials come in handy. For  
maximum protection, re-pack the unit as it was originally packed at the  
factory.  
ABOUT SYMBOLS  
ABOUT THE SYMBOL DISPLAY  
“ ” may appear on the TV screen during operation. This icon means  
the function explained in this owners manual is not available on that  
specific DVD video disc.  
WHEN SETTING UP THE UNIT  
ABOUT THE DISC SYMBOLS FOR INSTRUCTIONS  
A section whose title has one of the following symbol is applicable only  
to the disc represented by the symbol.  
The picture and sound of a nearby TV, VCR, or radio may be distorted  
during playback. In this case, position the unit away from the TV, VCR,  
or radio, or turn off the unit after removing the disc.  
DVD-V  
DVD Video discs  
VCD 2.0  
TO KEEP THE EXTERIOR SURFACES CLEAN  
Video CDs with the PBC (playback control) function  
VCD 1.0  
Do not use volatile liquids, such as insecticide spray, near the unit. Do  
not leave rubber or plastic products in contact with the unit for a long  
period of time. They will leave marks on the surface.  
Video CDs without the PBC (playback control) function  
CD  
Audio CDs  
MP3  
MP3 disc  
WMA  
WMA disc  
JPEG  
TO CLEAN THE CABINET  
JPEG disc  
Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth  
lightly moistened with a mild detergent solution. Do not use strong  
solvents such as alcohol, benzine, or thinner, as these might damage the  
surface of the unit.  
TO OBTAIN A CLEAR PICTURE  
The DVD player is a high-tech, precision device. If the optical pick-up  
lens and disc drive parts are dirty or worn, the picture quality will be  
poor. Regular inspection and maintenance are recommended after every  
1,000 hours of use. (This depends on the operating environment.) For  
details, please contact your nearest dealer.  
NOTES ON DISCS  
HANDLING DISCS  
Do not touch the playback side of the disc. Hold the disc by the edges  
so that fingerprints will not get on the surface. Do not stick paper or  
tape on the disc.  
STORING DISCS  
After playing, store the disc in its case.  
Do not expose the disc to direct sunlight or sources of heat, or leave it  
in a parked car exposed to direct sunlight, as there may be a  
considerable temperature increase inside the car.  
CLEANING DISCS  
Fingerprints and dust on the disc can cause poor picture quality and  
sound distortion. Before playing, clean the disc with a clean cloth. Wipe  
the disc from the center out.  
Do not use strong solvents such as alcohol, benzine, thinner,  
commercially available cleaners, or anti-static spray intended for older  
vinyl records.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
REAR PANEL  
COAXIAL (Digital audio out jack)  
Connect to digital (coaxial) audio equipment.  
AUDIO OUT (Left/Right)  
Connect to an amplifier, receiver, or stereo system.  
VIDEO OUT  
Connect to a TV with video inputs.  
12V TRIGGER IN  
By connecting this DVD player to another NAD audio component or system controller equipped with a 12V  
trigger output, you can remotely operate the T513 power ON/OFF.  
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)  
Connect to a TV with Y Pb Pr inputs.  
S-VIDEO OUT  
Connect to a TV with S-Video inputs.  
AC Power Cord  
Plug into the power source.  
OPTICAL (Digital audio out jack)  
Connect to digital (optical) audio equipment.  
DO NOT TOUCH THE INNER PINS OF THE CONNECTORS ON THE REAR PANEL.  
ELECTROSTATIC DISCHARGE MAY CAUSE PERMANENT DAMAGE TO THE UNIT.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
FRONT PANEL AND DISPLAY WINDOW  
MENU  
Accesses menu on a DVD disc.  
SKIP  
Moves to previous or next chapter/track.  
PAUSE  
Pause playback temporarily or press repeatedly for frame-by-frame playback.  
Disc Tray  
Insert playable media here.  
PLAY  
Starts Playback of media.  
Remote Sensor  
Point the DVD player’s remote  
Display window  
Shows the current status of  
control here.  
the player  
OPEN/CLOSE  
Opens or closes the disc tray.  
Power button  
Switches the player on and to  
standby.  
STOP  
Stops playback.  
Power Indicator  
Lights green when the DVD player is turned  
on. Lights amber when the DVD player is in  
standby.  
SCAN  
Press for fast reverse or forward search.  
Left / right / up / down / SELECT  
Selects an item in the OSD menu and Acknowledges menu selection  
Angle active  
TITLE Indicates current title number  
CHP/TRK Indicates current chapter or track number  
DVD  
DVD video disc inserted  
CD Audio CD inserted  
VCD Video CD inserted  
Indicates total play time or elapsed time  
MP3 MP3 or WMA disc inserted  
PROG. Programmed playback active  
Random playback active  
Indicates current player function:  
Playback, Pause, etc.  
Indicates repeat mode  
MP3 VCD  
CD DVD  
TITLE  
CHP/TRK  
PROG.  
RANDOM ALL  
A
B
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
REMOTE CONTROL  
OFF  
ON  
Switches DVD Player to standby  
Switches DVD Player ON  
PROGRAM  
AUDIO  
Selects an audio language (DVD) or  
an audio channel (CD)  
ON  
OFF  
ANGLE  
Enters to the program edit mode or exits from that  
CLEAR  
AUDIO  
SUBTITLE  
RPT A-B  
CLEAR  
Removes a track number on the program list or a mark on  
the MARKER SEARCH menu  
SUBTITLE  
Selects a subtitle language  
RANDOM  
ZOOM  
REPEAT  
PROGRAM  
MARKER  
ZOOM  
Enlarges video image  
ANGLE  
Selects a DVD camera angle if available  
0-9 number buttons  
Selects numbered items in a menu  
REPEAT  
Repeat chapter, track, title, and all  
NEXT DISC  
SEARCH  
SCAN  
RPT A-B  
Press for fast reverse search or forward search  
Repeat sequence  
MENU  
RANDOM  
Plays tracks in random order  
1
4
7
2
5
8
3
6
9
Accesses menu on a DVD disc  
RTN  
MARKER  
Marks any point during playback  
Removes the setup menu  
Displays the menu of a video CD with PBC  
SEARCH  
Displays MARKER SEARCH menu  
OPEN/CLOSE  
Opens and closes the disc tray  
SLOW  
0
STOP  
Reverse / Forward slow playback  
Stops playback  
SLOW  
SCAN  
SETUP  
SETUP  
PAUSE/STEP  
Accesses or removes setup menu  
Pauses playback temporarily/ press repeatedly for frame-by-  
frame playback  
TITLE  
TITLE  
MENU  
Displays the discs Title menu, if available  
Reverse SKIP  
Go to beginning of current chapter or track or go to previous  
chapter or track  
CURSOR  
ENTER  
Selects items in the on screen display menus  
PLAY  
ENTER  
Starts playback  
Acknowledges menu selection  
RTN  
DISP  
Forward SKIP  
Go to next chapter or track  
DISP  
OPEN/CLOSE  
STOP  
PLAY  
PAUSE/STEP  
Accesses On-Screen Display (OSD)  
SKIP  
SKIP  
DVD 5  
PLACE BATTERIES INTO OPENING. ENSURE  
THE CORRECT FITTING IS OBSERVED  
REPLACE BATTERY COVER BY ALIGNING AND  
INSERTING THE TWO TABS INTO THE HOLES.  
PRESS IN AND LIFT TAB TO REMOVE  
BATTERY COVER OUT OF RECESS  
PRESS BATTERY COVER INTO PLACE UNTIL IT  
'CLICKS' CLOSED  
REMOTE CONTROL OPERATION RANGE  
CAUTION  
Point the remote control at the remote sensor and press the buttons.  
Distance: About 23 ft (7 m) from the front of the remote sensor.  
Angle: About 30° in each direction of the front of the remote sensor.  
Do not mix old and new batteries. Never mix different types of batteries  
(standard, alkaline, etc.).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
CONNECTIONS  
Depending on your TV and other equipment you wish to connect,  
there are various ways you could connect the player. Use only one of  
the connections described below.  
PROGRESSIVE SCAN CONNECTION  
1
2
If your television is a high-definition or “digital ready” television, you  
may take advantage of the DVD Players progressive scan output for  
the highest video resolution possible.  
Please refer to the manuals of your TV, VCR, Stereo System or other  
devices as necessary to make the best connections.  
If your TV does not accept the Progressive Scan format, the picture  
will appear scrambled if you try Progressive Scan on the DVD Player.  
For better sound reproduction, connect the players AUDIO OUT  
connectors to the audio in connectors of your amplifier, receiver,  
stereo or audio/video equipment. See “Connecting to Optional  
Equipment” on page 10.  
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN  
connectors on the DVD Player to the corresponding in connectors on  
the TV using an optional Y Pb Pr cable (C).  
Connect the Left and Right AUDIO OUT connectors of the DVD Player  
to the audio left/right in connectors on the TV using the supplied  
audio cables (A).  
CAUTION  
Make sure the DVD Player is connected directly to the TV. Tune the  
TV to the correct video input channel.  
Do not connect the DVD Player’s AUDIO OUT jack to the phono in  
jack (record deck) of your audio system.  
NOTES  
Do not connect your DVD Player via your VCR. The DVD image could  
be distorted by the copy protection system.  
Set the Progressive to “On” on the setup menu for progressive  
signal, see page 13.  
Progressive scan does not work with the analog video connections  
(yellow VIDEO OUT jack).  
CONNECTING TO A TV  
Make one of the following connections, depending on the  
capabilities of your existing equipment.  
Rear of TV  
VIDEO CONNECTION  
1
Connect the VIDEO OUT jack on the DVD Player to the video in jack  
on the TV using the video cable (V).  
2
Connect the Left and Right AUDIO OUT connectors of the DVD  
Player to the audio left/right in connectors on the TV using the audio  
cables (A).  
S-VIDEO CONNECTION  
1
Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in  
jack on the TV using the S-Video cable (S).  
2
Connect the Left and Right AUDIO OUT connectors of the DVD  
Player to the audio left/right in connectors on the TV using the audio  
cables (A).  
COMPONENT VIDEO (COLOR STREAM®) CONNECTION  
1
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN  
connectors on the DVD Player to the corresponding in connectors on  
the TV using an Y / Pb / Pr cable (C).  
2
Connect the Left and Right AUDIO OUT connectors of the DVD  
Player to the audio left/right in connectors on the TV using the audio  
cables (A).  
Rear of DVD player  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
CONNECTIONS  
CONNECTING TO OPTIONAL EQUIPMENT  
Connecting to an amplifier equipped with two channel analog  
stereo or Dolby Pro Logic ll / Pro Logic  
Connect the Left and Right AUDIO OUT connectors on the DVD Player  
to the audio left and right in connectors on your amplifier, receiver, or  
stereo system, using the audio cables (A).  
Connecting to an amplifier equipped with two channel digital  
stereo (PCM) or to an Audio / Video receiver equipped with a  
multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)  
1
Connect one of the DVD Players DIGITAL AUDIO OUT connectors  
(OPTICAL (O) or COAXIAL (X)) to the corresponding in jack on your  
amplifier. Use an optional digital (optical (O) or coaxial (X)) audio  
cable.  
2
You will need to activate the players digital output. (See “Digital  
Audio Output” on page 14).  
DIGITAL MULTI-CHANNEL SOUND  
A digital multi-channel connection provides the best sound quality. For  
this you need a multi-channel Audio/Video receiver that supports one or  
more of the audio formats supported by your DVD Player (MPEG 2,  
Dolby Digital and DTS). Check the receiver manual and the logos on the  
front of the receiver.  
CAUTION  
Due to the DTS Licensing agreement, the digital output will be in DTS  
digital out when DTS audio stream is selected.  
Rear of DVD player  
Amplifier (Receiver)  
NOTES  
If the audio format of the digital output does not match the  
capabilities of your receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
Six Channel Digital Surround Sound via digital connection can only  
be obtained if your receiver is equipped with a Digital Multi-channel  
decoder.  
To see the audio format of the current DVD in the onscreen display,  
press AUDIO.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
BEFORE OPERATION  
GENERAL EXPLANATION  
TEMPORARY FEEDBACK FIELD ICONS  
This manual gives basic instructions for operating the DVD Player. Some  
DVDs require specific operation or allow only limited operation during  
playback. When this occurs, the symbol appears on the TV screen,  
indicating that the operation is not permitted by the DVD Player or is not  
available on the disc.  
TITLE  
CHAPT  
TRACK  
ALL  
Repeat Title  
Repeat Chapter  
Repeat Track (non-PBC Video CDs discs only)  
Repeat All Tracks (non-PBC Video CDs only)  
Repeat A-B  
ON-SCREEN DISPLAY  
General playback status can be displayed on the TV screen. Some items  
can be changed on the menu.  
A
B
ON-SCREEN DISPLAY OPERATION  
OFF  
1
2
3
Press DISP during playback.  
Repeat Off  
Press  
Press  
to select an item. The selected item will be highlighted.  
to change the setting of an item. The number buttons  
Resume play from this point  
Action prohibited or not available  
can be also be used for setting numbers (e.g., title number). For  
some functions, press ENTER to execute the setting.  
NOTES  
Some discs may not provide all of the features on the on-screen  
display example shown below.  
If no button is pressed for 10 seconds, the on-screen display  
disappears.  
DVD-V  
Items  
Function (Press  
to select desired item)  
Selection Method  
Shows the current title number and total number of titles, and  
skips to the desired title number.  
Title Number  
, or Numbers, ENTER  
1 /3  
1 /12  
Shows the current chapter number and total number of  
chapters, and skips to the desired chapter number.  
Chapter Number  
Time search  
, or Numbers, ENTER  
Numbers, ENTER  
Shows the elapsed playing time, and searches the point by the  
elapsed time directly.  
0:20:09  
Audio language and  
Digital Audio Output  
mode  
1 ENG  
D
5.1 CH  
Shows the current audio soundtrack language, encoding  
method, and channel number, and changes the setting.  
, or AUDEO  
Subtitle language  
Angle  
Shows the current subtitles language, and changes the setting.  
ABC  
, or SUBTITLE  
, or ANGLE  
OFF  
1 /1  
Shows the current angle number and total number of angles,  
and changes the angle number.  
Sound  
Shows the current sound mode, and changes the setting.  
NORM.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
BEFORE OPERATION  
VCD 2.0  
VCD 1.1  
Items  
Function (Press  
to select desired item)  
Selection Method  
Shows the current track number, total number of tracks and  
PBC On mode, and skip to the desired track number.  
Track Number  
, or Numbers, ENTER  
1 /3  
1 /12  
Time  
Shows the elapsed playing time (Display only)  
- - -  
Audio Channel  
Shows the audio channel, and changes the audio channel.  
, or AUDEO  
0:20:09  
1 ENG  
D
Sound  
Shows the current sound mode, and changes the setting.  
5.1 CH  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
BEFORE OPERATION  
INITIAL SETTINGS  
PICTURE  
DVD-V  
You can set your own Personal Preferences on the player.  
TV ASPECT  
4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays  
theatrical images with masking bars above and below the picture.  
4:3 Panscan: Select when a conventional TV set is connected. The video  
material formatted in the Pan & Scan style is played back in that style  
(Both sides of the picture are cut off).  
Initial Settings General Operation  
1
Press SETUP. The setup menu appears.  
Original  
Disc Audio  
English  
French  
Disc Subtitle  
Disc Menu  
16:9 Wide: Select when a 16:9 wide TV is connected.  
German  
Spanish  
Italian  
Rating  
4:3 Letterbox  
4:3 Panscan  
16:9 Wide  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Country Code  
TV Aspect  
Chinese  
Polish  
Menu Language  
Progressive Scan  
Digital Audio Output  
Hungarian  
Other – – – –  
Country Code  
TV Aspect  
Menu Language  
Others  
Progressive Scan  
Digital Audio Output  
2
3
4
5
Press  
to select the desired item. The screen will show the  
current setting for the selected item, as well as alternate setting(s).  
Others  
While the desired item is selected, press , then  
desired setting.  
to select the  
DVD-V  
Press ENTER to confirm your selection. Some items require additional  
steps.  
PROGRESSIVE SCAN  
Progressive Scan Video provides the highest quality pictures with less  
flickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE  
SCAN connectors, but are connecting the DVD Player to a standard  
(analog) television, set Progressive Scan to Off. If you are using the  
Component Video connectors for connection to a TV or monitor that is  
compatible with a progressive scan signal, set Progressive Scan to On.  
Press SETUP, RTN, or PLAY to exit the setup menu.  
LANGUAGE  
DVD-V  
DISC LANGUAGE  
Select a language for the discs Menu, Audio, and Subtitle.  
Original: The original language set for the disc is selected.  
Other: To select another language, press number buttons to enter the  
corresponding 4-digit number according to the language code list on  
page 27. If you enter the wrong language code, press CLEAR.  
Off  
On  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Country Code  
TV Aspect  
Original  
English  
French  
Disc Audio  
Menu Language  
Disc Subtitle  
Disc Menu  
Progressive Scan  
Digital Audio Output  
German  
Spanish  
Italian  
Rating  
Country Code  
TV Aspect  
Others  
Chinese  
Polish  
Menu Language  
Progressive Scan  
Digital Audio Output  
Hungarian  
Other – – – –  
CAUTION  
Once the setting for progressive scan output is entered, an image will  
only be visible on a progressive scan compatible TV or monitor. If you set  
Progressive Scan to On in error, you must reset the unit. Press STOP to  
stop any disc that is playing. Next, press STOP again and hold it for five  
seconds before releasing it. The video output will be restored to the  
standard setting, and a picture will once again be visible on a  
conventional analog TV or monitor.  
Others  
MENU LANGUAGE  
Select a language for the setup menu. This is the menu you see when  
you press SETUP.  
English  
Spanish  
French  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Country Code  
TV Aspect  
Menu Language  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
BEFORE OPERATION  
SOUND  
DIGITAL AUDIO OUTPUT  
Each DVD disc has a variety of audio output options. Set the players  
Digital Audio Output according to the type of audio system you use.  
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connected  
the DVD Players DIGITAL OUT jack to a Dolby Digital decoder (or an  
amplifier or other equipment with a Dolby Digital decoder).  
Stream/PCM: Select “Stream/PCM” if you connected the DVD Players  
DIGITAL OUT jack to an amplifier or other equipment with a DTS  
decoder, Dolby Digital decoder or MPEG decoder.  
PCM: Select when connected to a 2-channel digital stereo amplifier. The  
DVD player outputs sounds in the PCM 2channel format when you play  
a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2  
recording system.  
DOLBY  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
DIGITAL /PCM  
Stream/PCM  
PCM  
Country Code  
Sample Freq.  
48 KHz  
TV Aspect  
Menu Language  
96KHz  
Progressive Scan  
Digital Audio Output  
Others  
SAMPLE FREQUENCY  
To change the Sample Frequency setting, first select the desired Digital  
Audio Output as indicated as above.  
If your receiver or amplifier is NOT capable of handling 96 KHz signals,  
select 48 KHz. When this choice is made, this unit will automatically  
convert any 96 KHz signals to 48 KHz so your system can decode them.  
If your receiver or amplifier is capable of handling 96 KHz signals, select  
96 KHz. When this choice is made, this unit will pass each type of signal  
through without any further processing.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
BEFORE OPERATION  
OTHERS  
PARENTAL CONTROL  
DVD-V  
The DRC, PBC and Auto Play settings can be changed.  
RATING  
Press  
to select the desired item and press ENTER. The setting  
Movies on DVDs may contain scenes not suitable for children. Therefore,  
discs may contain Parental Control information that applies to the  
complete disc or to certain scenes on the disc. These scenes are rated  
from 1 to 8, and alternatively, more suitable scenes are available for  
selection on some discs. Ratings are country-dependent. The Parental  
Control feature allows you to prevent discs from being played by your  
children or to have certain discs played with alternative scenes.  
of the selected item is changed between On and Off.  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
DRC  
On  
On  
Off  
PBC  
Auto Play  
Country Code  
TV Aspect  
Menu Language  
8
Disc Audio  
Progressive Scan  
7
Disc Subtitle  
Digital Audio Output  
6
Disc Menu  
5
Rating  
Others  
4
Country Code  
3
TV Aspect  
2
Menu Language  
1
Progressive Scan  
DYNAMIC RANGE COMPRESSION (DRC)  
Digital Audio Output  
Unlock  
Change  
With the DVD format, you can hear a programs soundtrack in the most  
accurate and realistic presentation possible, thanks to digital audio  
technology. However, you may wish to compress the dynamic range of  
the audio output (the difference between the loudest sounds and the  
quietest ones). Then, you may listen to a movie at a lower volume  
without losing clarity of sound. Set DRC to On for this effect.  
Others  
1
2
3
Select “Rating” on the Setup menu using the  
While “Rating” is selected, press  
When you have not yet entered a password;  
buttons.  
.
Enter a 4-digit password using the numbered buttons to create a  
personal 4-digit security password, and then press ENTER. Enter the  
4-digit password again and press ENTER to verify.  
PBC  
Set Playback Control (PBC) to On or Off.  
On: Video CDs with PBC are played according to the PBC.  
Off: Video CDs with PBC are played the same way as Audio CDs.  
When you have already entered a password;  
Enter a 4-digit password using the numbered buttons to confirm the  
personal 4-digit security password, and then press ENTER. If you  
make a mistake before pressing ENTER, press CLEAR and enter 4-  
digit security password again.  
DVD-V  
AUTO PLAY  
You can set up the DVD Player so a DVD disc automatically starts playing  
whenever the DVD is inserted. If Auto Play mode is set to On, the T 513  
DVD player will search for the longest title playback time and then play  
back the title automatically.  
4
Select a rating from 1 to 8 using the  
buttons. Eight (8)  
has the least playback restrictions. One (1) has the most  
playback restrictions.  
On: Auto Play function is activated.  
Off: Auto Play function is not activated.  
Unlock: If you select Unlock, Parental Control is not active. The disc  
will play in full.  
Ratings 1 to 8. Some discs contain scenes not suitable for children.  
If you set a rating for the player, all disc scenes with the same rating  
or lower will be played. Higher rated scenes will not be played unless  
an alternative scene is available on the disc.  
NOTE  
The Auto Play function may not work for some DVDs.  
The alternative must have the same rating or a lower one. If no  
suitable alternative is found, playback will stop. You must enter the  
4-digit password or change the rating level in order to play the disc.  
Press ENTER to confirm your rating selection, and then press  
SETUP to exit the menu.  
5
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
BEFORE OPERATION  
DVD-V  
COUNTRY CODE  
NOTE  
Confirmation of the 4-digit password is necessary when the code is  
Enter the code of a country/area whose standards were used to rate the  
DVD video disc, referring to the list (See “Country Code List”, page 28.)  
changed (see “Changing the 4-digit code” below).  
Disc Audio  
Code Set  
CHANGING THE 4-DIGIT CODE  
Disc Subtitle  
Disc Menu  
U
S
1
2
3
4
5
Follow Steps 1-2 as shown above to the left (Rating).  
Enter the old code, and then press ENTER.  
Rating  
Country Code  
TV Aspect  
Select Change using  
buttons then press ENTER.  
Enter the new 4-digit code, and then press ENTER.  
Enter exactly the same code a second time and verify by pressing  
ENTER.  
Menu Language  
Progressive Scan  
Digital Audio Output  
6
Press SETUP to exit the menu.  
Others  
1
2
3
4
5
Select Country Code using the  
buttons on the setup menu.  
.
IF YOU FORGET YOUR 4-DIGIT CODE  
If you forget your password, to clear the current password, follow the  
procedure below:  
While Country Code is selected, press  
Follow step number “3” of “Rating” on left side of this page.  
Select the first character using the buttons.  
Shift the cursor using button and select the second character  
using buttons.  
1
2
Press SETUP to display the setup menu.  
Use the Number buttons to enter the 6-digit number “210499”. The  
4-digit password is cleared. “P CLr” appears on the T 513s front  
display for a moment.  
6
Press ENTER to confirm your country code selection, then press  
SETUP to exit the menu.  
3
Enter a new code as shown under “Rating”  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH DVD AND VIDEO CD  
PLAYING A DVD AND VIDEO CD  
MOVING TO ANOTHER CHAPTER / TRACK  
DVD-V  
VCD 2.0  
VCD 1.1  
DVD-V  
VCD 1.1  
PLAYBACK SETUP  
Turn on the TV and select the video input source connected to the  
DVD player.  
When a title on a disc has more than one chapter or a disc has more  
than one track, you can move to another chapter/track as follows:  
Audio system: Turn on the audio system and select the input source  
connected to the DVD player.  
Press SKIP  
or  
briefly during playback to select the next  
chapter/track or to return to the beginning of the current  
chapter/track.  
1
2
3
Press OPEN/CLOSE to open the disc tray.  
Press  
To go directly to any chapter during DVD playback, press DISP. Then,  
press to select the chapter/track icon. Then, enter the  
chapter/track number using the numbered buttons (0-9).  
twice briefly to step back to the previous chapter/track.  
Load your chosen disc in the tray, with the playback side down.  
Press OPEN/CLOSE to close the tray. READING appears on the TV  
screen, and playback starts automatically. If playback does not start,  
press PLAY. In some cases, the disc menu might appear instead.  
1 /12  
1 /3  
1 /12  
IF A MENU SCREEN IS DISPLAYED  
The menu screen may be displayed first after loading a DVD or Video  
CD which offer a menu.  
NOTE  
For two-digit numbers, press the numbered buttons (0-9) in rapid  
succession.  
DVD-V  
DVD-V  
VCD 2.0  
VCD 1.1  
Use the  
buttons to select the title/chapter you want to view,  
SEARCH  
then press ENTER to start playback. Press TITLE or MENU to return to the  
menu screen.  
1
Press and hold SCAN  
or  
for about two seconds during  
playback. The player will now go into SEARCH mode.  
Press and hold SCAN or repeatedly to select the required  
X4, X16, X100 (backward) or  
X16, X100 (forward). With a Video CD,  
X2, X4, X8, (backward) or  
X8, (forward).  
To exit SEARCH mode, press PLAY.  
2
VCD 2.0  
speed:  
X2,  
X2,  
X4,  
Use the number buttons to select the track you want to view. Press  
RTN to return to the menu screen.  
the Search speed changes:  
X2, X4,  
Menu setting and the exact operating procedures for using the  
menu may differ depending on the disc. Follow the instructions on  
the each menu screen. You also may set PBC to Off under setup. See  
page 15.  
3
DVD-V  
VCD 2.0  
VCD 1.1  
PAUSE  
1
2
Press PAUSE/STEP during playback.  
To return to playback, press PLAY.  
NOTES  
If Parental Control is set and the disc is not within the Rating settings  
STILL PICTURE AND FRAME-BY-FRAME PLAYBACK  
DVD-V  
VCD 2.0  
VCD 1.1  
(not authorized), the 4-digit code must be entered and/or the disc  
must be authorized (see “Parental Control).  
1
2
Press PAUSE/STEP during playback. The player will now go into  
PAUSE mode.  
DVDs may have a region code. Your player will not play discs that  
have a region code different from your player. The region code for  
this player is 2 (two).  
You can advance the picture frame-by-frame by pressing  
PAUSE/STEP repeatedly on the remote control.  
GENERAL FEATURES  
NOTE  
Unless stated otherwise, all operations described use the remote  
control. Some features may also be available on the Setup menu.  
DVD-V  
MOVING TO ANOTHER TITLE / GROUP  
When a disc has more than one title/group, you can move to another  
title/group as follows:  
Press DISP, then press the appropriate numbered button (0-9) to  
select a title/group number.  
1 /3  
1/6  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH DVD AND VIDEO CD  
DVD-V  
VCD 2.0  
VCD 1.1  
DVD-V  
VCD 2.0  
VCD 1.1  
SLOW MOTION  
REPEAT  
DVD Video Discs - Repeat Chapter/Title/Off  
1
Press SLOW  
mode.  
or  
during playback. The player will enter SLOW  
1
2
3
To repeat the currently playing chapter, press REPEAT. The Repeat  
Chapter icon appears on the TV screen.  
2
Use the SLOW  
or  
to select the required speed:  
1/2 (backward), or 1/16,  
1/2 (forward).  
To exit slow motion mode, press PLAY.  
1/16,  
1/8,  
1/8,  
1/4 or  
1/4 or  
To repeat the title currently playing, press REPEAT a second time. The  
Repeat Title icon appears on the TV screen.  
3
To exit Repeat mode, press REPEAT a third time. The Repeat Off icon  
appears on the TV screen.  
NOTE  
GROUP  
TITLE  
TRACK  
CHAPT  
ALL  
OFF  
Slow motion playback in reverse is not applicable for Video CD.  
VCD 2.0  
VCD 1.1  
RANDOM  
Video CDs - Repeat Track/All/Off  
1
Press RANDOM during playback or in stop mode. The unit  
automatically begins Random Playback and “RANDOM” appears on  
the display window.  
1
2
3
To repeat the track currently playing, press REPEAT. The Repeat Track  
icon appears on the TV screen.  
To repeat the disc currently playing, press REPEAT a second time. The  
Repeat All icon appears on the TV screen.  
2
To return to normal playback, press RANDOM until “RANDOM”  
disappears on the display window.  
To exit Repeat mode, press REPEAT a third time. The Repeat Off icon  
appears on the TV screen.  
TIPS  
By pressing SKIP  
another title (track) and resumes Random playback.  
during Random playback, the unit selects  
NOTE  
On a Video CD with PBC, you must set PBC to Off on the setup  
menu to use the Repeat function. See page 15.  
NOTE  
DVD-V  
This function only works with video CD without PBC.  
On a Video CD with PBC, you must set PBC to Off in the setup menu  
to use the Random function. See page 15.  
TIME SEARCH  
The Time Search function allows you to start playing at any chosen time  
on the disc.  
1
Press DISP during playback. The on-screen display appears on the  
screen. The Time Search box shows the elapsed playing time of the  
current disc.  
DVD-V  
VCD 2.0  
VCD 1.1  
REPEAT A-B  
To repeat a sequence in a title or group:  
1
2
Press RPT A-B at your chosen starting point. “A *” appears briefly  
on the TV screen.  
2
3
Within 10 seconds, press  
to select the Time Search icon in the  
on-screen display. The “-:--:--” appears in the Time Search box.  
Within 10 seconds, use the number buttons to enter the required  
start time. Enter hours, minutes, and seconds from left to right in the  
box. If you enter the wrong numbers, press CLEAR to remove the  
numbers you entered. Then enter the correct numbers.  
Press RPT A-B again at your chosen end point. “A B” appears briefly  
on the TV screen, and the repeat sequence begins (“AB” appears  
the display window).  
3
To cancel the sequence, press RPT A-B.  
4
Within 10 seconds, press ENTER to confirm the start time. Playback  
starts from the selected time on the disc. If you enter an invalid time,  
playback will continue from the current point.  
A
*
A
B
OFF  
0:20:09  
-:--:--  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH DVD AND VIDEO CD  
DVD-V  
VCD 2.0  
VCD 1.1  
SPECIAL DVD FEATURES  
3D SURROUND  
DVD-V  
This unit can produce a 3D Surround effect, which simulates multi-  
channel audio playback from two conventional stereo speakers, instead  
of the five or more speakers normally required to listen to multichannel  
audio from a home theater system.  
MENUS  
DVDs may offer menus that allow you to access special features. To use  
the disc menu, press MENU. Then, press the appropriate number button  
to select an option. Or, use the  
selection, then press ENTER.  
buttons to highlight your  
1
2
Press DISP during playback.  
Use  
to select the sound option. The sound option will be  
DVD-V  
highlighted.  
TITLE MENU  
3
Use  
to select “3D SUR”. To turn off the 3D Surround effect,  
1
2
3
Press TITLE. If the current title has a menu, the menu will appear on  
select “NORM”.  
the screen. Otherwise, the disc menu may appear.  
The menu can list camera angles, spoken language and subtitle  
options, and chapters for the title.  
3D SUR  
NORM.  
To remove the title menu, press TITLE again.  
DVD-V  
VCD 2.0  
VCD 1.1  
ZOOM  
DVD-V  
The Zoom function allows you to enlarge the video image and to move  
through the enlarged image.  
DISC MENU  
1
2
Press MENU. The disc menu is displayed.  
1
Press ZOOM during playback or still playback to activate the Zoom  
function. If you press ZOOM repeatedly, the magnification level  
increases up to six steps.  
To remove the disc menu, press MENU again.  
DVD-V  
CAMERA ANGLE  
2
3
Use the  
buttons to move through the zoomed picture.  
If the disc contains scenes recorded at different camera angles, you can  
change to a different camera angle during playback.  
Press CLEAR to resume normal playback or return to the paused  
image.  
Press ANGLE repeatedly during playback to select a desired angle.  
The number of the current angle appears on the display.  
NOTE  
1 /1  
The zoom function may not work for some DVDs.  
DVD-V  
VCD 2.0  
VCD 1.1  
DVD-V  
MARKER SEARCH  
CHANGING THE AUDIO LANGUAGE  
Press AUDIO repeatedly during playback to hear a different audio  
language or audio track.  
You can start playback from a memorized point. Up to nine points can  
be memorized. To enter a mark, follow these steps.  
1
1 ENG  
D
5.1 CH  
1
2
During disc playback, press MARKER when playback reaches the  
spot that you want to memorize. The Marker icon will appear on the  
TV screen briefly.  
PPCM  
5 CH  
VCD 2.0  
VCD 1.1  
Repeat step 1 to enter up to nine Marker points on a disc.  
CHANGING THE AUDIO CHANNEL  
Press AUDIO repeatedly during playback to hear a different audio  
channel (STER., LEFT or RIGHT).  
MARKER SEARCH  
1/9  
DVD-V  
To Recall a Marked Scene  
SUBTITLES  
1
During disc playback, press SEARCH. The MARKER SEARCH menu  
will appear on the screen.  
Press SUBTITLE repeatedly during playback to see the different subtitle  
languages.  
2
Within 10 seconds, press  
want to recall.  
to select a Marker number that you  
ABC  
1 ENG  
3
4
Press ENTER. Playback will start from the marked scene.  
To remove the MARKER SEARCH menu, press SEARCH.  
NOTE  
If “ ” appears, the feature is not available on the disc.  
To clear a Marked Scene  
1
During disc playback, press SEARCH. The MARKER SEARCH menu  
will appear on the screen.  
2
3
4
5
Press  
to select the Marker number that you want to erase.  
Press CLEAR. The Marker number will be erased from the list.  
Repeat steps 2 and 3 to erase additional Marker numbers.  
To remove the MARKER SEARCH menu, press SEARCH.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH AUDIO CD AND MP3 / WMA DISC  
PLAYING AN AUDIO CD AND MP3 / WMA DISC  
NOTES ON MP3/WMA RECORDINGS  
ABOUT MP3  
CD  
MP3  
WMA  
The DVD Player can play MP3/WMA formatted recordings on CD-ROM,  
CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the  
notes on MP3/WMA Recordings on right.  
An MP3 file is audio data compressed by using the MPEG1 audio  
layer-3 file-coding scheme. We call files that have the “.mp3” file  
extension “MP3 files”.  
The player can not read an MP3 file that has a file extension other  
than “.mp3”.  
1
Insert a disc and close the tray.  
Audio CD; Audio CD menu appears on the TV screen go to step 4.  
MP3 / WMA disc; The MP3/WMA-JPEG choice menu appears on  
the TV screen. Go to step 2  
ABOUT WMA (WINDOW MEDIA AUDIO)  
An WMA file is a Microsoft audio compression technology.  
WMA (Windows Media Audio) offers double the audio compression  
of the MP3 format.  
MP3 WMA  
JPEG  
MP3 / WMA Disc compatibility with this player is limited as  
follows:  
2
Press  
to select the MP3/WMA then press ENTER.  
The MP3/WMA menu appears on the TV screen. Press RTN to move  
to the MP3/WMA-JPEG choice menu.  
1
Sampling Frequency / only at 44.1 kHz (MP3), 22.05 - 44.1 kHz  
(WMA)  
2
3
4
Bit rate / within 32 - 320 kbps (MP3), 32 - 196 kbps (WMA)  
CD-R physical format should be “ISO 9660”  
Program  
MP3 WMA  
Folder1  
Folder2  
Folder3  
Folder4  
Folder5  
Folder6  
Folder7  
Folder8  
If you record MP3/WMA files using the software which cannot  
create a FILE SYSTEM, for example “Direct-CD” etc., it is impossible  
to playback MP3/WMA files. We recommend that you use “Easy-  
CD Creator”, which creates an ISO9660 file system.  
A single session disc requires MP3/WMA files in the first track. If  
there is no MP3/WMA file in the 1st track, it cannot playback  
MP3/WMA files. If you wish to playback MP3/WMA files, format all  
the data in the disc or use a new one.  
Clear All  
OFF  
00:00  
5
6
3
4
Press  
to select a folder, and ENTER.  
A list of files in the folder appears.  
File names should be named using 8 letters or less and must  
incorporate “.mp3” or “.wma” extension e.g. “********.MP3” or  
“********.WMA”.  
Press  
to select a track then press PLAY or ENTER.  
Playback starts. During playback, the current tracks elapsed playing  
time will appear on the display window and menu. Playback will  
stop at the end of the disc.  
7
8
Do not use special letters such as / : \ * ? “ < >” etc.  
Total number of files on the disc should be less than 650. This DVD  
player requires discs/recordings to meet certain technical standards  
in order to achieve optimal playback quality. Pre-recorded DVDs are  
automatically set to these standards. There are many different types  
of recordable disc formats (including CD-R containing MP3 or WMA  
files) that require certain pre-existing conditions (see above) to insure  
compatible playback.  
Press TITLE to move to the next page.  
Press MENU to move to the previous page.  
Program  
Program  
MP3 WMA  
CD  
TRACK01  
TRACK 1.mp3  
TRACK02  
TRACK03  
TRACK04  
TRACK05  
TRACK06  
TRACK07  
TRACK08  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
Clear All  
OFF  
Clear All  
NORM.  
Customers should also note that permission is required in order  
to download MP3/WMA files and music from the Internet. NAD  
Electronics International has no right to grant such permission.  
Permission should always be sought from the copyright owner.  
00:00  
1
0: 56: 18  
STER.  
Audio CD menu  
MP3/WMA menu  
MP3  
WMA  
TIP  
5
PAUSE CD  
1
2
If you are in a file list and want to return to the Folder list, use the  
to highlight and press ENTER to return to the previous  
menu screen.  
Press PAUSE/STEP during playback.  
To return to playback, press PLAY or press PAUSE/STEP again.  
CD  
MP3  
WMA  
MOVING TO ANOTHER TRACK  
To stop playback at any other time, press STOP.  
Press SKIP  
or  
briefly during playback to go to the next track  
or to return to the beginning of the current track.  
Press SKIP  
twice briefly to step back to the previous track.  
In case of audio CD, to go directly to any track, enter the track  
number using the numbered buttons (0-9) during playback.  
CD  
MP3  
WMA  
REPEAT TRACK / ALL / OFF  
1 To repeat the track currently playing, press REPEAT. The Repeat icon  
and “TRACK” appears on the menu screen.  
2 To repeat all tracks on a disc, press REPEAT a second time.  
The Repeat icon and “ALL” appears on the menu screen.  
3 To cancel Repeat mode, press REPEAT a third time. The Repeat icon  
and “OFF” appears on the menu screen.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH AUDIO CD AND MP3 / WMA DISC  
CD  
MP3  
WMA  
SEARCH  
1
Press and hold SCAN  
or >  
> during playback. The player will  
now go into SEARCH mode.  
Press and hold SCAN or  
speed: X2, X4, X8 (backward) or  
X8 (forward). Search speed and direction are indicated on the  
menu screen.  
To exit SEARCH mode, press PLAY.  
2
repeatedly to select the required  
X2, X4,  
3
CD  
MP3  
WMA  
RANDOM  
1
Press RANDOM during playback or when playback is stopped. The  
unit automatically begins Random Playback and RANDOM or  
“RAND.” appears on the display window and menu screen.  
To return to normal playback, press RANDOM repeatedly until  
RANDOM or “RAND.” disappears on the display window and menu  
screen.  
2
CD  
REPEAT A-B  
To repeat a sequence:  
1
2
During disc playback, press RPT A-B at your chosen starting point.  
The Repeat icon and “A *” appears on the menu screen.  
Press RPT A-B again at your chosen end point. The Repeat icon and  
“A B” appears on the menu screen, and the sequence begins to play  
repeatedly.  
3
To exit the sequence and return to normal play, press RPT A-B again.  
The Repeat icon and “OFF” appears on the menu screen.  
CD  
3D SURROUND  
This unit can produce a 3D Surround effect, which simulates multi-  
channel audio playback from two conventional stereo speakers, instead  
of the five or more speakers normally required to listen to multichannel  
audio from a home theater system.  
1
2
Press DISP during playback.  
Use  
to select the sound option. The sound option will be  
highlighted.  
3
Use  
to select “3D SUR”. To turn off the 3D Surround effect,  
select “NORM”.  
CD  
CHANGING THE AUDIO CHANNEL  
Press AUDIO repeatedly during playback to hear a different audio  
channel (STER., LEFT, or RIGHT).  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH JPEG DISC  
JPEG  
VIEWING A JPEG DISC  
MOVING TO ANOTHER FILE  
Press SKIP or once during viewing a picture to advance to the  
This DVD Player can play discs with JPEG files and Kodak picture CD.  
Before playing JPEG recordings, read the notes on JPEG Recordings on  
the right.  
next file or to the previous file.  
STILL PICTURE  
1
2
Insert a disc and close the tray.  
The MP3/WMA-JPEG choice menu appears on the TV screen.  
1
Press PAUSE/STEP during slide show. The player will now go into  
PAUSE mode.  
2
To return to the slide show, press PLAY or press PAUSE/STEP again.  
MP3 WMA  
JPEG  
TO FLIP THE PICTURE  
Press  
during showing a picture to flip the picture horizontally or a  
Press  
to select the JPEG then press ENTER.  
vertically.  
The JPEG menu appears on the TV screen.  
TO ROTATE PICTURE  
JPEG  
Folder1  
Folder2  
Folder3  
Folder4  
Folder5  
Folder6  
Folder7  
Folder8  
Press  
during showing a picture to rotate the picture clockwise or  
counter clockwise.  
NOTES ON JPEG RECORDINGS  
Depending upon the size and number of the JPEG files, it could take  
a long time for the DVD player to read the disc’s contents. If you  
don’t see an onscreen display after several minutes, some of the files  
are too big - reduce the resolution of the JPEG files to less than 2  
mega pixels and burn another disc.  
Off  
Slide Speed  
3
Press  
to select a folder, and ENTER.  
A list of files in the folder appears. Press RTN to move to the  
MP3/WMA-JPEG choice menu.  
Total number of files and folders on the disc should be less than 650.  
Some disc may be incompatible due to different recording format or  
condition of disc.  
TIP  
If you are in a file list and want to return to the Folder list, use the  
buttons on the remote to highlight “  
to return to the previous menu screen.  
“ and press ENTER  
When you are using software such as “Easy CD Creator” to burn the  
jpeg files into the CD-R, ensure that all the selected files have the  
“.jpg” extensions when copying into the CD layout.  
If the files have “.jpe” or “.jpeg” extensions, please rename them as  
“.jpg” files.  
4
If you want to view a particular file, press  
file and press ENTER or PLAY.  
to highlight a  
Viewing of the file starts. During viewing a file, press RTN to move  
to the previous menu (JPEG menu).  
Press TITLE to move to the next page.  
Press MENU to move to the previous page.  
Folder1  
File names without “.jpg” extension will not be able to be read by  
this DVD player. Even though the files are shown as JPEG image files  
in windows explorer.  
JPEG  
Picture1.jpg  
Picture2.jpg  
Picture3.jpg  
Picture4.jpg  
Picture5.jpg  
Picture6.jpg  
Picture7.jpg  
Off  
5/32  
1024X768  
Slide Speed  
5/32  
1024X768 Picture5.jpg  
TIP  
5
There are three viewing Slide Speed options: Fast, Normal, Slow, and  
Off. Press to highlight the Slide Speed then press to select  
the option you want to use, and press ENTER.  
To stop viewing at any other time, press STOP.  
The JPEG menu appears.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
VCD 2.0  
VCD 1.1  
CD  
MP3  
WMA  
PROGRAMMED PLAYBACK  
PROGRAMMED PLAYBACK WITH AUDIO CD AND  
MP3/WMA DISC  
PROGRAMMED PLAYBACK WITH VIDEO CD  
NOTE  
The Program function enables you to store your favorite tracks from any  
disc in the player memory.  
On a Video CD with PBC, you must set PBC to Off on the setup  
menu to use the Program function. See page xx  
Program can contain 30 tracks.  
1
2
Insert Video CD and close the tray.  
1
Press PROGRAM during playback or in the stop mode to enter  
the Program Edit mode.  
Press PROGRAM while playback is stopped.  
The mark will appear to the right of the word Program on the right  
side of the menu screen.  
The VCD Program menu will appear.  
Program  
E
VCD  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
TRACK 8  
NOTE  
Press PROGRAM to exit the Program Edit mode; the  
disappear.  
E
mark will  
Clear All  
2
3
Select a track, and then press ENTER to place the selected  
track on the Program list.  
NOTE  
Press RTN or PROGRAM to exit the Program menu.  
Repeat step 2 to place additional tracks on the Program list.  
3
4
Follow steps 2-6 of “Programmed Playback with Audio CD  
and MP3/WMA disc” on left.  
E
Program  
E
Program  
MP3 WMA  
CD  
TRACK 1  
TRACK 12  
TRACK 8  
TRACK 10  
TRACK 3  
TRACK 8.mp3  
TRACK 2.mp3  
TRACK 4.mp3  
TRACK 3.mp3  
TRACK 1.mp3  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
TRACK 8  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
To resume normal playback from programmed playback,  
press PROGRAM.  
“PROG.” indicator disappears in the display window.  
Clear All  
NORM.  
Clear All  
OFF  
0: 56: 18  
STER.  
00:00  
3
REPEAT PROGRAMMED TRACKS  
Audio CD menu  
Press  
The programmed track you selected last is highlighted on the  
program list.  
MP3/WMA menu  
To repeat the track currently playing, press REPEAT. The Repeat icon  
and “TRACK” appears on the menu screen.  
4
5
6
To repeat all tracks on the program list, press REPEAT a second time.  
The Repeat icon and “ALL” appears on the menu screen.  
To cancel Repeat mode, press REPEAT a third time. The Repeat icon  
and “OFF” appears on the menu screen.  
Press  
to select the track you want to start playing.  
Press TITLE to move to the next page.  
ERASING A TRACK FROM PROGRAM LIST  
1
Press MENU to move to the previous page.  
Press PROGRAM during playback (Audio CD and MP3/WMA disc  
E
only) or in the stop mode to enter the Program Edit mode. The  
Press PLAY to start.  
mark will appear.  
Playback begins in the order in which you programmed the tracks  
and “PROG.” appears on the menu screen.  
Playback stops after all of the tracks on the Program list have played  
once.  
2
3
Press  
Use  
to move to the Program list.  
to select the track that you wish to erase from the  
Program list.  
4
Press CLEAR. The track will be erased from the Program list.  
7
To resume normal playback from programmed playback,  
select a track of CD (or MP3/WMA) list and then press ENTER.  
“PROG.” indicator disappears on the menu screen.  
ERASING THE COMPLETE PROGRAM LIST  
1
2
Follow steps 1-2 of “Erasing a Track from Program List” as above.  
Use to select “Clear All”, and then press ENTER. The complete  
Program for the disc will be erased. The programs are also cleared  
when the disc is removed.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
ADDITIONAL INFORMATION  
VCD 2.0  
VCD 1.1  
LAST CONDITION MEMORY  
This player memorizes the user settings for the last disc that you have  
viewed. Settings remain in memory even if you remove the disc from the  
player or switch off the player. If you load a disc that has its settings  
memorized, the latest stop position is automatically recalled.  
SCREEN SAVER  
The screen saver picture appears when you leave the DVD Player in stop  
mode for about five minutes. After the Screen Saver has been engaged  
for about five minutes, the DVD Player will automatically turn itself off.  
VCD 2.0  
VCD 1.1  
VIDEO MODE SETTING  
With certain discs, the playback picture may be flickering or Dot  
Crawl is shown on straight lines. That means Vertical interpolation or  
De-interlace is not perfectly matched with the disc. In this case, the  
picture quality may be improved by changing the video mode.  
To change the video mode, press and hold DISP about 3 seconds  
during disc playback. The new video mode number selected is  
displayed on the TV screen. Check whether the video quality has  
improved. If not, repeat the above procedure until picture quality is  
improved.  
Video mode change sequence: MODE1 MODE2 MODE3 ➜  
MODE1  
If you turn off the power, the video mode will be back to initial state  
(MODE1).  
DETAILED DESCRIPTIONS FOR VIDEO MODES  
MODE1: The source material of the DVD video (film material or video  
material) is determined from disc information.  
MODE2: Suitable for playing film based content or video based material  
recorded by the progressive scan method.  
MODE3: Suitable for playing video based content with comparatively  
little motion.  
NOTE  
The video mode setting only works when the Progressive Scan mode  
is set to “On” in the Setup menu.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
TROUBLESHOOTING  
Check the following guide for the possible cause of a problem before contacting service.  
SYMPTOM  
CAUSE  
CORRECTION  
The power cord is disconnected.  
Plug the power cord into the wall outlet securely.  
No power.  
No disc is inserted.  
Insert a disc. (Check that the DVD or, audio CD  
indicator in the display window is lit.)  
The power is on, but the DVD player does not  
work.  
The TV is not set to receive DVD signal output.  
Select the appropriate video input mode on the  
TV so the picture from the DVD player appears  
on the TV screen.  
No picture.  
The video cable is not connected securely.  
The connected TV power is turned off.  
Connect the video cable securely.  
Turn on the TV.  
The equipment connected with the audio cable  
is not set to receive DVD signal output.  
Select the correct input mode of the audio  
receiver so you can listen to the sound from the  
DVD player.  
No sound.  
The audio cables are not connected securely.  
Connect the audio cable securely.  
The power of the equipment connected with the  
audio cable is turned off.  
Turn on the equipment connected with the  
audio cable.  
The Digital Audio Output is set to the wrong  
position.  
Set the Digital Audio Output to the correct  
position, then turn on the DVD player again by  
pressing ON.  
The disc is dirty.  
Clean the disc.  
The playback picture is poor.  
No disc is inserted.  
Insert a disc. (Check that the DVD or audio CD  
indicator in the DVD display is lit.)  
The DVD player does not start playback.  
An unplayable disc is inserted.  
Insert a playable disc. (Check the disc type, color  
system, and Regional code.)  
The disc is placed upside down.  
The disc is not placed within the guide.  
Place the disc with the playback side down.  
Place the disc on the disc tray correctly inside the  
guide.  
The disc is dirty.  
Clean the disc.  
The Rating level is set.  
Cancel the Rating function or change the rating  
level.  
The remote control is not pointed at the remote  
sensor of the DVD player.  
Point the remote control at the remote sensor of  
the DVD player.  
The remote control does not work properly.  
The remote control is too far from the DVD  
player.  
Operate the remote control within 23 ft (7 m).  
Remove the obstacle.  
There is an obstacle in the path of the remote  
control and the DVD player.  
The batteries in the remote control are  
exhausted.  
Replace the batteries with new ones.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
TABLE OF LANGUAGES AND THEIR ABBREVIATIONS  
Language Code List  
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”  
Code Language  
6566 Abkhazian  
6565 Afar  
Code Language  
7074 Fiji  
Code Language  
7678 Lingala  
Code Language  
8373 Singhalese  
8375 Slovak  
8376 Slovenian  
8379 Somali  
6983 Spanish  
8385 Sudanese  
8387 Swahili  
8386 Swedish  
8476 Tagalog  
8471 Tajik  
7073 Finnish  
7082 French  
7089 Frisian  
7684 Lithuanian  
7775 Macedonian  
7771 Malagasy  
7783 Malay  
6570 Afrikaans  
8381 Albanian  
6577 Ameharic  
6582 Arabic  
7176 Galician  
7565 Georgian  
6869 German  
6976 Greek  
7776 Malayalam  
7784 Maltese  
7773 Maori  
7289 Armenian  
6583 Assamese  
6588 Aymara  
6590 Azerbaijani  
6665 Bashkir  
6985 Basque  
6678 Bengali; Bangla  
6890 Bhutani  
6672 Bihari  
7576 Greenlandic  
7178 Guarani  
7185 Gujarati  
7265 Hausa  
7782 Marathi  
7779 Moldavian  
7778 Mongolian  
7865 Nauru  
8465 Tamil  
8484 Tatar  
7387 Hebrew  
7273 Hindi  
7869 Nepali  
8469 Telugu  
8472 Thai  
7879 Norwegian  
7982 Oriya  
7285 Hungarian  
7383 Icelandic  
7378 Indonesian  
7365 Interlingua  
7165 Irish  
6679 Tibetan  
8473 Tigrinya  
8479 Tonga  
8482 Turkish  
8475 Turkmen  
8487 Twi  
6682 Breton  
8065 Panjabi  
6671 Bulgarian  
7789 Burmese  
6669 Byelorussian  
7577 Cambodian  
6765 Catalan  
9072 Chinese  
6779 Corsican  
7282 Croatian  
6783 Czech  
8083 Pashto, Pushto  
7065 Persian  
8076 Polish  
7384 Italian  
8084 Portuguese  
8185 Quechua  
8277 Rhaeto-Romance  
8279 Rumanian  
8285 Russian  
8377 Samoan  
8365 Sanskrit  
7168 Scots  
7465 Japanese  
7487 Javanese  
7578 Kannada  
7583 Kashmiri  
7575 Kazakh  
7589 Kirghiz  
7579 Korean  
7585 Kurdish  
7679 Laothian  
7665 Latin  
8575 Ukrainian  
8582 Urdu  
8590 Uzbek  
8673 Vietnamese  
8679 Volapük  
6789 Welsh  
Gaelic 8779 Wolof  
8872 Xhosa  
7473 Yiddish  
8979 Yoruba  
9085 Zulu  
6865 Danish  
7876 Dutch  
6978 English  
8382 Serbian  
8372 Serbo-Croatian  
8378 Shona  
6979 Esperanto  
6984 Estonian  
7079 Faroese  
7686 Latvian, Lettish  
8368 Sindhi  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
COUNTRY CODE LIST  
Enter the appropriate code number for the initial setting “Country Code”  
Code Country  
Code Country  
Code Country  
Code Country  
AD Andorra  
ER  
ES  
ET  
FI  
Eritrea  
LC  
LI  
Saint Lucia  
Liechtenstein  
Sri Lanka  
Liberia  
SC  
SD  
SE  
SG  
SH  
SI  
Seychelles  
Sudan  
AE  
AF  
United Arab Emirates  
Afghanistan  
Spain  
Ethiopia  
Finland  
Fiji  
LK  
LR  
LS  
LT  
Sweden  
AG Antigua and Barbuda  
Singapore  
Saint Helena  
Slovenia  
AI  
Anguilla  
Albania  
FJ  
Lesotho  
AL  
FK  
Falkland Islands  
Lithuania  
Luxembourg  
Latvia Islands  
Libya  
AM Armenia  
FM Micronesia  
LU  
LV  
LY  
SJ  
Svalbard and  
Jan Mayen  
Slovak Republic  
Sierra Leone  
AN Netherlands Antilles  
AO Angola  
FO  
FR  
FX  
Faroe Islands  
France  
SK  
SL  
AQ Antarctica  
France (European  
Territory)  
MA Morocco  
AR  
AS  
AT  
Argentina  
MC Monaco  
SM San Marino  
American Samoa  
Austria  
GA Gabon  
MD Moldavia  
SN  
SO  
SR  
ST  
Senegal  
GB  
Great Britain  
MG Madagascar  
MH Marshall Islands  
MK Macedonia  
ML Mali  
Somalia  
AU Australia  
AW Aruba  
GD Grenada  
Suriname  
GE  
GF  
Georgia  
Saint Tome and Principe  
Former USSR  
El Salvador  
Syria  
AZ  
BA  
BB  
BD  
BE  
BF  
Azerbaidjan  
French Guyana  
SU  
SV  
SY  
SZ  
Bosnia-Herzegovina  
Barbados  
Bangladesh  
Belgium  
GH Ghana  
MM Myanmar  
MN Mongolia  
MO Macau  
GI  
Gibraltar  
GL  
Greenland  
Swaziland  
Turks and Caicos Islands  
Chad  
GM Gambia  
GN Guinea  
MP Northern Mariana Islands  
MQ Martinique (French)  
MR Mauritania  
MS Montserrat  
MT Malta  
TC  
TD  
TF  
Burkina Faso  
Bulgaria  
BG  
BH  
BI  
GP  
Guadeloupe (French)  
French Southern  
Territories  
Bahrain  
GQ Equatorial Guinea  
Burundi  
GR  
GS  
Greece  
TG  
TH  
TJ  
Togo  
BJ  
Benin  
S. Georgia &  
S. Sandwich Isls.  
Guatemala  
MU Mauritius  
Thailand  
BM Bermuda  
MV Maldives  
Tadjikistan  
Tokelau  
BN  
BO  
BR  
BS  
BT  
BV  
Brunei Darussalam  
GT  
MW Malawi  
TK  
Bolivia  
GU Guam (USA)  
GW Guinea Bissau  
GY Guyana  
MX Mexico  
TM Turkmenistan  
Brazil  
MY Malaysia  
TN  
TO  
TP  
TR  
TT  
TV  
Tunisia  
Bahamas  
Bhutan  
MZ Mozambique  
NA Namibia  
Tonga  
HK  
Hong Kong  
East Timor  
Turkey  
Bouvet Island  
HM Heard and McDonald  
Islands  
NC New Caledonia (French)  
BW Botswana  
NE  
NF  
Niger  
Trinidad and Tobago  
Tuvalu  
BY  
BZ  
Belarus  
Belize  
HN Honduras  
Norfolk Island  
HR  
HT  
Croatia  
Haiti  
NG Nigeria  
TW Taiwan  
TZ Tanzania  
CA Canada  
NI  
Nicaragua  
Netherlands  
CC Cocos (Keeling) Islands  
HU Hungary  
NL  
UA Ukraine  
UG Uganda  
CF  
Central African Republic  
ID  
IE  
Indonesia  
Ireland  
Israel  
NO Norway  
CG Congo  
NP  
NR  
Nepal  
Nauru  
UK  
United Kingdom  
CH Switzerland  
IL  
UM USA Minor Outlying  
Islands  
CI  
CK  
CL  
Ivory Coast  
Cook Islands  
Chile  
IN  
IO  
India  
NU Niue  
British Indian Ocean  
Territory  
Iraq  
NZ  
New Zealand  
US  
UY  
UZ  
VA  
VC  
United States  
Uruguay  
OM Oman  
CM Cameroon  
CN China  
IQ  
IR  
PA  
PE  
PF  
Panama  
Uzbekistan  
Iran  
Peru  
Vatican City State  
Saint Vincent &  
Grenadines  
CO Colombia  
IS  
Iceland  
Italy  
Polynesia (French)  
Papua New Guinea  
Philippines  
Pakistan  
CR  
CS  
Costa Rica  
IT  
PG  
PH  
PK  
PL  
Former Czechoslovakia  
JM  
JO  
JP  
Jamaica  
Jordan  
Japan  
VE  
Venezuela  
CU Cuba  
VG Virgin Islands (British)  
CV  
CX  
CY  
CZ  
DE  
DJ  
Cape Verde  
Poland  
VI  
Virgin Islands (USA)  
Vietnam  
Christmas Island  
Cyprus  
KE  
Kenya  
PM Saint Pierre and Miquelon  
VN  
VU  
KG Kyrgyzstan  
PN  
PR  
PT  
Pitcairn Island  
Puerto Rico  
Portugal  
Vanuatu  
Czech Republic  
Germany  
KH  
KI  
Cambodia6  
Kiribati  
WF Wallis and Futuna Islands  
WS Samoa  
Djibouti  
KM Comoros  
PW Palau  
YE  
YT  
YU  
ZA  
Yemen  
DK  
Denmark  
KN  
KP  
KR  
Saint Kitts & Nevis Anguilla  
PY  
Paraguay  
Mayotte  
DM Dominica  
North Korea  
South Korea  
QA Qatar  
Yugoslavia  
South Africa  
DO Dominican Republic  
RE  
RO  
RU  
Reunion (French)  
DZ  
EC  
EE  
Algeria  
KW Kuwait  
Romania  
ZM Zambia  
ZR Zaire  
ZW Zimbabwe  
Ecuador  
Estonia  
KY  
KZ  
LA  
LB  
Cayman Islands  
Russian Federation  
Kazakhstan  
Laos  
RW Rwanda  
EG  
EH  
Egypt  
SA  
SB  
Saudi Arabia  
Solomon Islands  
Western Sahara  
Lebanon  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
SPECIFICATIONS  
GENERAL  
Power requirements  
Power consumption  
Dimensions (approx.)  
Weight (approx.)  
AC 110-240V, 50/60 Hz  
14W  
435 X 55 X 241 mm (w x h x d)  
2.4 kg  
Operating temperature  
Operating humidity  
5˚C to 35˚C (41˚F to 95˚F)  
5 % to 90 %  
SYSTEM  
Laser  
Signal system  
Semiconductor laser, wavelength 650 nm  
NTSC  
Frequency response  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100dB (ANALOG OUT connectors only)  
Less than 0.008%  
More than 100 dB (DVD)  
More than 95 dB (CD)  
OUTPUTS  
VIDEO OUT  
1 Vp-p 75 ohms, sync negative, RCA jack x 1  
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 ohms  
S-VIDEO OUT  
COMPONENT VIDEO OUT  
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2  
0.5 V (p-p), 75 ohms, RCA jack x 1  
Audio output (digital audio)  
Audio output (optical audio)  
5 V (p-p), 75 ohms, Optical connector x 1  
INPUTS  
+ 12V Trigger input  
center pin +12V at 50 mA, subminiature banana jack x 1  
ACCESSORIES  
Video cable  
Audio cable  
Remote control  
Batteries  
1
1
1
2
Design and specifications are subject to change without notice.  
Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby Laboratories.  
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.  
“DTS’ and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
©2003 NAD ELECTRONICS INTERNATIONAL  
A DIVISION OF LENBROOK INDUSTRIES LIMITED  
All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International  
T 513 Manual AH Version 10/03  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Nady Systems Digital Camera MPA 400 User Manual
Navman GPS Receiver LA000508 User Manual
NEC Projector PowerLite 30c User Manual
Nokia Cell Phone X500 User Manual
NordicTrack Home Gym NTEL75062 User Manual
Onkyo Stereo System TX SR504 B User Manual
Panasonic Car Stereo System CQ VX2200W User Manual
Panasonic Electric Shaver ES2023 User Manual
Panasonic Projector DW6300K User Manual
Patton electronic Power Supply 2036 User Manual