®
C 515BEE
Compact Disc Player
Owner’s Manual
Manuel d’Installation
Manual del Usuario
Manuale delle Istruzioni
Bedienungsanleitung
Gebruikershandleiding
Bruksanvisning
Инструкция по эксплуатации
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
19 damage requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
fcc warning
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
induStrY canada requirement
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) when the product exhibits a distinct change in performance-this
indicates a need for service.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF UNINSULATED“DANGEROUS VOLTAGE”
WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
20 replacement parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN
THE LITERATURE ACCOMPANYING THE APPLIANCE.
21 Safety check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22 wall or ceiling mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
23 heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves or other products (including amplifiers)
that produce heat.
warning
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
The equipment draws its nominal non-operational power from the AC
outlet with its POWER switch in the STANDBY position.
The socket-outlet shall be installed near the apparatus and shall be easily
accessible.
caution
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
caution
Changes or modifications to this equipment not expressly approved by
NAD Electronics for compliance could void the user’s authority to operate
this equipment.
caution
The C 515BEE employs a Laser System. To ensure proper use of this product,
please read this owner’s manual carefully and retain for future reference.
Should the unit require maintenance, contact an authorized service
location. Use of controls, adjustments or the performance of procedures
other than those specified may result in exposure to laser radiation. To
prevent direct exposure to laser beam, do not try to open the enclosure.
Visible laser radiation when the enclosure is opened.
caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit
(from the largest outer dimensions including projections) that is equal to or
greater than shown below.
Left and Right Panels: 10 cm
do not Stare into beam.
Rear Panel: 10 cm
Top Panel: 50 cm
fcc notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
important information for uk cuStomerS
noteS on environmental protection
At the end of its useful life, this product must not be disposed
DO NOT cut off the mains plug from this equipment. If the plug fitted is not
suitable for the power points in your home or the cable is too short to reach
a power point, then obtain an appropriate safety approved extension lead
or consult your dealer. If, nonetheless, the mains plug is cut off, REMOVE
THE FUSE and dispose of the PLUG immediately, to avoid possible shock
hazard by inadvertent connection to the mains supply. If this product is
not provided with a mains plug, or one has to be fitted, then follow the
instructions given below:
of with regular household waste but must be returned to a
collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user’s manual and
packaging, point this out.
The materials can be reused in accordance with their markings. Through
re-use, recycling of raw materials or other forms of recycling of old
products, you are making an important contribution to the protection of
our environment. Your local administrative office can advise you of the
responsible waste disposal point.
important
DO NOT make any connection to the larger terminal which is marked with
the letter‘E’or by the safety earth symbol or colored GREEN or GREEN AND
YELLOW.
note: the c 515bee iS not an auto voltage cd plaYer.
connect onlY to the preScribed ac outlet, i.e., 120v 60hz
or 230v 50hz.
The wires in the mains lead on this product are colored in accordance with
the following code:
BLUE – NEUTRAL
BROWN – LIVE
record Your model number (now, while You can See it)
The model and serial number of your new C 515BEE are located on the
back of the cabinet. For your future convenience, we suggest that you
record these numbers here:
As these colors may not correspond with the colored markings identifying
the terminals in your plug, proceed as follows:
The BLUE wire must be connected to the terminal marked with the
letter‘N’or colored BLACK.
Model no. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial no. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The BROWN wire must be connected to the terminal marked with the
letter‘L’or colored RED.
When replacing the fuse, only a correctly rated and approved type should
be used, and be sure to re-fit the fuse cover.
if in doubt conSult a competent electrician.
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited
Copyright 2007, NAD Electronics International, a division of Lenbrook Industries Limited
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
table of contentS
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
USING THE C 515BEE – CD 7 REMOTE CONTROL . . . . . . . . . . . . . . . . . .11
NUMERIC KEY PAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
REPEAT A-B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RANDOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
DIMMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TIME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
INTRODUCTION
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
UNPACKING AND SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
QUICK START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
IDENTIFICATION OF CONTROLS
FRONT PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CD 7 REMOTE CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
REFERENCE
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1ꢀ
NOTES ON DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1ꢀ
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1ꢁ
OPERATION
USING THE C 515BEE - FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
CD-R AND CD-RW AUDIO DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLAYING MP3/WMA FILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
thank You for chooSing nad.
We encourage you to take a few minutes now to read right through this
manual. Investing a little time here at the outset might save you a good
deal of time later, and is by far the best way to ensure that you make the
most of your investment in the C 515BEE.
The C 515BEE CD Player is a technologically advanced and highly capable
product – yet we have invested great effort in making it simple and easy
to use. We have been careful to ensure that the C 515BEE is as musically
transparent and spatially accurate as possible, incorporating much of
what we’ve learned from a quarter-century’s experience designing audio
and home-theater components. As with all our products, NAD’s“Music
First”design philosophy guided the C 515BEE’s design, such that it can
confidently promise you both state-of-the-art and audiophile-quality music
listening for years to come.
One more thing: We urge you to register your C 515BEE ownership on the
NAD Worldwide Web site:
For warranty information contact your local distributor.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
getting Started
UNPACKING AND SETUP
what’S in the box
QUICK START
In case you simply cannot wait to experience the performance of your new
NAD C 515BEE, we provide the following“Quick Start”instructions to get
you underway.
Packed with your C 515BEE you will find:
•
•
•
An audio cable connector
The CD 7 remote control with 2 (two) AAA batteries
This owner’s manual
Please make all the connections to your C 515BEE with the unit unplugged.
It is also advisable to power-down or unplug all associated components
while making or breaking any signal or AC power connections.
Save the packaging
Please save the box and all of the packaging in which your C 515BEE
arrived. Should you move or otherwise need to transport your C 515BEE,
this is by far the safest container in which to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box!
plaY a cd
1
Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line
Output jacks to the corresponding CD inputs on your amplifier.
Plug in the AC power cord.
Press the POWER button to turn ON the player.
Press [OPEN/CLOSE] to open the disc drawer.
Place a CD, label side up, in the tray’s circular recess. Be certain that the
disc is centered within the recess.
2
3
4
5
chooSing a location
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
25 feet/8 meters, between the C 515BEE’s front panel and your primary
listening/viewing position. This will ensure reliable infrared remote control
communications. The C 515BEE generates a modest amount of heat, but
nothing that should trouble adjacent components. It is perfectly possible to
stack the C 515BEE on top of other components.
6
7
8
Press [PLAY]. The drawer closes automatically, and the disc begins to
play.
At any time you may press [SKIP
the disc.
Press [PAUSE] if you want to stop play temporarily while keeping the
pickup at its current position on the disc. Press [PAUSE] again or [PLAY]
when you want to resume playback. Press STOP if you want to end play
and reset the pickup to the beginning of the disc.
or
] to select different tracks on
note on inStallation
IMPORTANT! Install the C 515BEE Compact Disc player on a level, vibration-
free surface. Severe vibration or operation in a tilted position may cause
the player to mis-track. The player may be stacked with other stereo
components, as long as there is adequate ventilation around it. If the
C 515BEE is placed in close proximity to a radio tuner (AM or FM), a VCR or
a television set, the operation of its digital circuits may produce static that
would interfere with reception of weak broadcast signals. If this occurs,
move the C 515BEE away from other devices or switch it off when viewing
or listening to broadcasts.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF CONTROLS
front panel
1
2
5
6
7
8
3
4
9
10
1
power: Press this button to switch ON the C 515BEE. The Standby
LED indicator will turn from amber to blue and illuminate the Vacuum
Fluorescent Display (VFD). Pressing the power button again turns the
unit back to standby mode.
6
7
plaY: Press to start play or to resume play after Pause. If the disc tray
is open, press this button to automatically close the tray and start
playback if a disc is loaded.
pauSe: During playback, press this button to stop playback
temporarily, keeping the optical pickup at its current position on the
disc. To resume playback at the exact point where it stopped, press
[PLAY] or [PAUSE] again.
The C 515BEE can also be switched ON from standby mode by pressing
[OPEN/CLOSE] or [PLAY] button on the front panel as well as on the
remote control.
If the disc tray is open and the C 515BEE is powered OFF, the disc tray
will draw close and the unit powered OFF.
8
Stop: Press the [STOP] button once to stop playback and re-set the
pickup to the beginning of the disc. The display reverts to showing the
number of tracks and total playing time on the disc. If the C 515BEE
was programmed to play a selection of tracks, the program will be
retained in the player’s memory.
2
3
indicator: This indicator will light up amber when the C 515BEE is
in standby state. When the C 515BEE is at ON state, this indicator will
illuminate blue.
Pressing [STOP] twice at program mode will delete the program.
diSc traY: With the DISC TRAY open, insert a CD or other compatible
media disc face down onto the tray.
9
open/cloSe: Press this button to open and close the disc tray. When
in standby, this button will also power ON the C 515BEE and at the
same time open the disc tray.
“No Disc”appears on the C 515BEE’s VFD if the disc is placed upside
down.
10 Skip/Scan: Press
to skip forward or
to skip backward a track
4
5
remote SenSor: Point the CD 7 at the remote sensor and press the
buttons. Do not expose the remote sensor of the CD 7 to a strong light
source such as direct sunlight or illumination. If you do so, you may not
be able to operate the C 515BEE with the remote control.
or file.
Press and hold
down a track. The SCAN
backwards through the recording at high speed. The SCAN
causes the optical pickup to scan rapidly forward through the music.
or
for more than 2 seconds to search up or
button causes the optical pickup to scan
button
distance: About 23ft (7m) from the front of the remote sensor.
angle: About 30o in each direction of the front of the remote sensor.
vfd: The Vacuum Fluorescent Display (VFD) provides playback
information, settings and other indicators.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF CONTROLS
rear panel
3
1
2
ATTENTION!
Please make sure that the C 515BEE is powered off or unplugged before making any connections. It is also advisable to power-down or unplug all
associated components while making or breaking any signal or AC power connections.
1
2
line out: Connect to the corresponding analog audio input of an
amplifier, receiver or stereo system.
3
ac power cord: Plug the AC power cord into a live AC wall socket.
Make sure all connections have been made before connecting to the
mains.
digital out (coaxial, optical): Connect the optical or coaxial
digital OUT ports to the corresponding S/PDIF digital input of an
amplifier, receiver, computer soundcard or other digital processors.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF CONTROLS
cd 7 remote control
ON – Switches CD Player ON.
OFF – Switches CD player OFF.
PROGRAM – Enter or exit program mode.
DELETE - Clears programmed track.
TIME – Toggle to show timer and information
details of the current track or MP3/WMA file.
RANDOM – Play tracks in random mode.
REPEAT – Repeat track, file or whole disc.
RPT A-B – Repeat sequence.
DIMMER – Toggle to reduce, turn off or restore
VFD brightness.
FOLDER – Toggle between folder lists.
FILE – Scroll through WMA or MP3 files.
ENTER – Starts playback of MP3 or WMA file.
STOP – Stops playback.
OPEN – Opens and closes disc tray.
PAUSE – Pauses playback temporarily.
SKIP
SKIP
– Go to next track or file.
– Go to beginning of current track/file
or to previous track/file.
0 to 9 number buttons – Direct-entry of track
or file number.
SCAN
SCAN
– Press for fast forward search.
– Press for fast reverse search.
PLAY – Starts playback.
INDEX – Playback can be started from any
desired index number
Press in and lift tab to remove battery cover out
of recess.
Press batteries into opening. Ensure correct
fitting is observed.
Replace battery cover by aligning and inserting
the two tabs into the holes. Press battery cover
into place until‘clicks’closed.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
uSing the c 515bee - featureS
CD-R AND CD-RW AUDIO DISCS
NOTES
The C 515BEE can play back CD-R or CDRW audio discs that have been
recorded on a computer or CD recorder. The quality of CD-R, CD-RW audio
discs varies widely which may affect playability. Some factors that affect
playability:
•
The procedure for programming MP3/WMA files is the same as above
with an exception at step 2 and 3 – the total number of programmed
files and total playback time will not be displayed during programming.
If you want to select file number “9” in a disc where there are 100 or more
MP3/WMA files, press “0” twice and then “9.”
Pressing STOP key at any time during the programming procedure will
put to a STOP the sequence and clear all the currently programmed
tracks or files. VFD will revert back to displaying the total number of
tracks and total playback time for audio CD and total number of files for
MP3/WMA.
•
•
•
The quality of the disc itself. Generally speaking, CD-R, CD-RW blanks
from well-renowned companies give better results than unbranded
ones.
•
•
The quality of CD-recorder or computer CD re/writer. Some recorders
and writers produce better results than others.
The CD-R and CD-RW were created with high-speed writing. In general,
the quality of a CD-R or CD-RW is better when produced at a lower
speed against a higher speed on the same recorder or re/writer.
•
Pressing STOP key twice during program playback will result to having
the whole program list deleted.
PLAYING MP3/WMA FILES
review / edit program liSt
The C 515BEE can play MP3/WMA formatted recordings on CD-R or CD-RW
discs. You may mix any of the file types on the disc. Using the CD 7 remote
control, one can select through the MP3/WMA folders and files as well as
start playback through the following steps
1
Initiate review or edit of your program entries through either of the
following initial steps
•
•
If you are still in programming mode, press [PROGRAM].
If during program playback, press [STOP] once then [PROGRAM].
1
2
3
Load the applicable disc.
2
3
The VFD will show the first Program Number and the corresponding
“blinking”programmed track.
To change the programmed track of a particular sequence, use the
Press [FOLDER
Press [FILE
] to select desired folder. Press [ENTER].
] to select desired file number. You must be at STOP or
playback mode to access both folders.
Direct-Entry numeric keypad buttons. Press [SKIP
or
] to move
4
Press [ENTER] to start playback. For each file type being played, the
C 515BEE will display the file type at the VFD and a corresponding icon
at the VFD. Information about the Song Title, Album and Artist name, if
available, will scroll through the VFD during playback.
forward or backward the programmed tracks as well as review the list
and change if so desired.
If you want to delete a particular program sequence during program
review, press [DELETE] key.
After finalizing your program changes or completing your review, press
[PROGRAM] again.
4
5
NOTES
•
The file number is recognized per disc, not per folder – that is, the
number assigned to each file corresponds to their sequence in the disc.
If you want to select file number “9” in a disc where there are 100 or more
MP3/WMA files, press “0” twice and then “9.”
program plaYback
•
1
To play the stored program, press [PLAY] while you are in“PROGRAM”
mode. “PROG”icon will appear in the display, indicating that a stored
program is being played. During Program Play, the SKIP buttons will
access only the tracks in the program list.
PROGRAMMING
The program function enables you to store your favorite tracks from any
disc in the player memory. When programming a sequence of tracks, the
C 515BEE must be in STOP mode. Using the CD 7 remote control, enter your
desired program sequence through the following steps
2
If you want to play only a portion of a stored program, initiate play and
press SKIP to jump over the programmed tracks that you don’t want to
hear.
1
Press [PROGRAM]. The display indicates“P01 T00”. The“00”in the“T00”
keeps on blinking, meaning that the player is awaiting the first Program
entry.
Use the Direct-Entry numeric keypad buttons to enter the first track
in your planned sequence. Upon entering the track number, the VFD
will briefly show the total number and total time of the currently
programmed tracks like“TTL 01 3:25”.
The display will revert to show“P02 T00,”indicating that the player is
ready for your second program entry. Upon entering the second track,
the VFD will again briefly show the total number and total time of the
currently programmed tracks like “TTL 02 6:45”–“TTL 02”indicates that
there are now a total of two programmed tracks and“6:45”is the total
playback time of both programmed tracks.
Repeat steps 2 and 3 to select and store other track numbers in
memory, up to a maximum of 40 entries. If you attempt to program
more than 40 tracks or files, “P-FULL”will be displayed in the VFD.
Press [PROGRAM] to end or finalize the program – the VFD will show the
last programmed number and track.
Stop or delete program
1
To terminate Program play, press [STOP] once. The stored track list
remains in memory. If you want to play the program again, simply press
[PLAY].
2
2
To clear the program memory, perform any of the following steps
•
•
•
Press [STOP] twice during program playback.
Press [OPEN] to open the disc tray.
Switch OFF the power.
3
4
5
6
Press to start program playback.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
uSing the cd 7 remote control
A wireless remote control is provided with your compact disc player,
enabling you to operate playback functions from the comfort of your chair
or from virtually anywhere in the room. For reliable operation there should
be a clear line-of-sight path from the remote control to the front of the CD
player. If the player does not respond to remote commands, it may be that
this line-of-sight path is obstructed by clothing, paper, or furnishings.
TIME
Toggle to display the following disc information during playback.
INFORMATION
AUDIO CD
CD TEXT
MP3/WMA
Elapsed time of the
current track
✔
✔
-
Remaining time of the
current track
✔
✔
✔
✔
-
-
Most of the buttons on the remote control handset have the same effect as
the corresponding buttons on the front panel of the player. In addition, the
handset is equipped with some extra buttons like the following function
keys.
Total playback time of
the disc
Remaining time of the disc
Disc title
✔
-
✔
✔
✔
✔
✔
-
-
NUMERIC KEY PAD
Track name
-
-
Using the direct-entry numeric keypad (0 to 9) causes the C 515BEE to jump
directly to the beginning of a numbered track and commence play. Thus, to
play Track 5, simply press“5”. To play Track 20, press“2”and“0”.
Artist name
-
✔
✔
Song title
-
Elapsed time of the
current file
-
-
-
-
✔
✔
REPEAT
Remaining time of the
current file
To repeat the playback of a particular track or file, press the CD 7’s [REPEAT]
key once. Toggle the [REPEAT] key to repeat all the tracks, files, folder
(blinking) or until repeat mode is turned OFF.
File name
Album name
Year
-
-
-
-
-
-
-
-
✔
✔
✔
✔
REPEAT A-B
To repeat a sequence, implement the following procedures:
Comment
1
2
Press [RPT A-B] at your chosen starting point.
Press [RPT A-B] again at your chosen end point. The repeat sequence
begins.
NOTES
•
Some information may not be displayed on some discs. Display is
dependent on the disc’s information content.
3
Press [RPT A-B] again to cancel the sequence.
•
Information about the Song Title, Album and Artist name, if available,
will scroll through the VFD during playback.
RANDOM
Press [RANDOM] key during playback or stop mode. Playback of the first
randomly selected track or file automatically begins. A corresponding
“RANDOM”icon is illuminated at the VFD. Press [RANDOM] again to return
to normal playback.
If the file has no available information about the artist or album, the
display will show “No artist” or “No album”.
For audio CD, the default information display is the elapsed time of the
current track.
•
DIMMER
INDEX
Toggle to reduce, turn off and restore VFD brightness.
The index system is a method of subdividing tracks into smaller divisions for
easier location of those parts. If a disc includes index numbers, playback can
be started from any desired index number through the following steps
1
2
Press [INDEX] during playback.
Using the numeric buttons, press the desired index number - for
example“0”and“3”. The VFD will show“INDEX 03 TR10”with“03”the
entered index number.
3
To revert to normal display information, press [INDEX] again.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
troubleShooting
condition
poSSible cauSeS
poSSible SolutionS
No power.
•
•
The power cord is disconnected.
•
•
Plug the power cord into the wall outlet
securely.
The power is on, but the C 515BEE does
not work.
No disc is inserted.
Insert a disc.
The C 515BEE does not start playback.
•
•
•
The disc is loaded upside down.
The disc is too dirty.
•
•
•
Reload the disc with the label side UP.
Clean the disc.
No sound.
The equipment connected with the audio
cable is not set to receive CD signal output.
Select the correct input mode of the audio
receiver so you can listen to the sound from
the C 515BEE.
•
•
•
•
•
The power of the equipment connected with
the audio cable is turned off.
•
•
•
•
•
Turn on the equipment connected with the
audio cable.
Sound skips.
The C 515BEE is subject to vibration or physical
shock from external sources.
Change the installation location.
The remote control does not work properly.
The remote control is not pointed at the
remote sensor on the CD player.
Point the remote control at the remote
sensor of the CD player.
The remote control is too far from the CD
player.
Operate the remote control closer to the
CD player.
The remote control batteries are dead.
Replace the remote control batteries.
noteS on diScS
handling diScS
cleaning diScS
Do not touch the playback side of the disc. Hold the disc by the edges so that
fingerprints do not get on the surface. Never stick paper or tape on the disc.
Fingerprints and dust on the disc can cause poor picture quality and sound
distortion. Before playing, clean the disc with a clean cloth. Wipe the disc
from the center out.
Storing diScS
After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.
Do not use strong solvents such as alcohol, benzine, thinner, commercially
available cleaners, or anti-static spray intended for older vinyl records.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
SpecificationS
SYSTEM
Output level
Frequency response (ref. 0dB 20Hz-20kHz)
Total harmonic distortion (ref. 1kHz)
Signal/Noise ratio (A-weighted, ref. 1kHz)
Channel balance (ref. 0dB 1kHz)
Dynamic range
2.2V
+ 0.5dB
<0.003%
110dB
+ 0.5dB
95dB
Channel separation
95dB (1kHz)
95dB (10kHz)
-4.53 + 0.5dB (5kHz)
-9.04 + 0.5dB (16kHz)
+ 0.01dB (0 to -60dB)
De-emphasis (ref. 0dB)
Linearity (ref. 0dB)
PHYSICAL SPECIFICATIONS
Dimensions (W x H x D)
435x60x241mm (Net)
435x65x249mm (Gross)
3.52kg
Net weight
Shipping weight
4.7kg
Note: Gross dimensions include feet, extended buttons and rear panel terminals.
information about C 515BEE.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
©2007 nad electronicS international
a diviSion of lenbrook induStrieS limited
All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International
C 515BEE Manual 09/07
Download from Www.Somanuals.com. All Manuals Search And Download.
|