A5.5 CD
A5.5 SERIES COMPACT DISC PLAYER WITH VALVE OUTPUT STAGE
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity A5.5 CD player
This model uses a professional quality drawer loading CD transport, ultra low jitter 24 Bit DAC technology
and further jitter reduction techniques to achieve both an excellent technical specification and unparalleled
CD sound quality. This is complemented by an ECC88 valve buffer stage to give a high quality valve audio
output.
The A5.5 is a perfect answer to CD requirements in a beautifully engineered package.
Used properly and carefully, it should give many years of outstanding musical reproduction.
Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they
may harm the surface finish.
If you have any questions about your audio system,
Please consult your dealer who is there to help and advise.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
A5.5 CD
CLASS 1 LASER PRODUCT
The A5.5 is a CD player which has been designed and manufactured according to FDA regulations "title 21, CFR,
chapter 1, sub-chapter J, based on the Radiation Control for Health and Safety Act of 1968", and is classified as a Class
1 laser product. There is no hazardous radiation during normal use because invisible radiation emitted inside this
product is completely confined within the protective housing. However you must observe the following important
warnings:
CAUTION!
THIS CD PLAYER USES INVISIBLE LASER LIGHT. WHEN THE PLAYER OPERATES, LASER LIGHT
IS RADIATED INTERNALLY. DO NOT REMOVE THE PROTECTIVE HOUSINGS.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE CAUSING EYE
INJURY.
IF THIS PRODUCT DEVELOPS A FAULT, PLEASE CONTACT YOUR AUTHORISED MUSICAL
FIDELITY SERVICE AGENT. DO NOT ATTEMPT TO SERVICE IT YOUR-SELF AND DO NOT
CONTINUE TO USE THIS PRODUCT IN A FAULTY STATE.
INTERNAL LASER WARNING LABELS
CAUTION
VORSICH!
-
-
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
UNSICHTBARE LASERSTRAHLUNG TRITT AUS,
WENN DECKEL GEÖFFNET UND WENN
SICHERHEITSVERRIEGELUNG ÖBERBRÖCT IST.
NICHT DEM STRAHL AUSSETZEN!
- OSYNLIG LASERSTRALNING NÄR DENNA DEL
AR ÖPPNAD OCH SPÄRR ÄR URKOPPLAD.
STRALEN AL FARLIG.
CAUTION!
CLASS 1
LASER
VARNING
ADVARSEL - USYNLIG LASERSTRAKING VED ABNING, NAR
SIKKERHEDSAFBRYDEREER UDE AF FUNCTION UNDGA
UDSÆTTELSE FOR STRALING.
VAROITUSI - SUOJAKOTELOA EI SAA AVATA LAITE SISÄLTÄÄ
LASERDIODIN, JOKA LAHETTÄÄ (NAKYMATONTA)
SILMILLE VAARALLISTA LASERSATEILYA.
PRODUCT
REAR PANEL
THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR, CHAPTER 1,
SUBCHAPTER J, PART 1040 AT DATE OF MANUFACTURE.
THIS PRODUCT COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO TWO CONDITIONS:
1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Issue 2: 27th September 2007
Page 3 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
A5.5 CD
LASER INFORMATION:
Manufacturer : Sharp
Optical pick-up :
Pick-up type : GH6C005B
Wavelength : 780nm
RADIO - FREQUENCY INTERFERENCE (RFI)
This equipment uses and can radiate radio frequency energy, and if not installed and operated in accordance with the
instructions, may cause interference to radio communications.
However, it is designed to radiate minimal levels of RFI, and accordingly been testing to North American standards
(FCC regulations - limits for a class B digital device pursuant to part 15 of the rules). These requirements are intended
to provide reasonable protection against excessive interference in a residential installation.
Conversely, the product has also been checked to ensure that its own operation is not adversely affected by normal
background levels of RFI received externally.
However, if interference is experienced, for instance to radio or TV broadcasts, the user is recommended to try one or
more of the following measures:
•
Identify the source of interference by turning off power to the CD player or other equipment individually, and
checking whether the problem disappears.
•
•
•
•
Re-orientate or relocate the receiving aerial.
Move the CD player away from the receiver.
Connect the CD player to a mains outlet on a different circuit from the receiver.
Consult a dealer or experienced TV/radio technician for help.
If a problem persists, please contact Musical Fidelity's service department.
Issue 2: 27th September 2007
Page 4 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL ADVICE
A5.5 CD
INSTALLATION PRECAUTIONS and USER INFORMATION
Your new A5.5 is designed and built to provide trouble-free performance, but as with all electronic devices it is
necessary to observe a few precautions:
Heed all warnings shown on the back of the product.
Only connect the A5.5 to a mains outlet having the same voltage as marked at the back of the unit.
Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched
off.
Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items
placed on them.
Do not use near water, or place water-filled containers on the A5.5, for example, a flower vase or potted plants.
If water does spill inside, immediately pull out the mains plug from the wall socket and inform your
dealer, who should then check the unit before further use. Entry of liquid into the A5.5 is dangerous,
and may cause electric shock or fire hazard.
Do not place the unit near direct heat sources such as radiators, direct sunlight or other equipment.
Do not remove any covers or try to gain access to the inside. There are no internal adjustments or fuses you
can replace yourself. Refer all service work to an authorised Musical Fidelity agent.
Note: Unauthorised opening of the equipment will invalidate any warranty claim.
Dust regularly with a soft cloth or soft brush but be careful when using cleaning or polishing agents - they may
harm the surface finish.
The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by
lightning. For protection of your audio system during electrical storms, remove the mains plugs and disconnect any
aerial lead.
If after-sales service is required, to help your dealer identify the A5.5 please quote the serial number located on the rear
panel of the unit.
Issue 2: 27th September 2007
Page 5 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
ITEM DISPOSAL INFORMATION
A5.5 CD
DISPOSAL
AFVAL
The crossed out wheeled bin label that appears on
Het label op de achterzijde van dit apparaat, een
afvalbak op wielen met een kruis doorgehaald, geeft aan dat dit
apparaat niet samen met gewoon huishoudafval mag worden
weggegooid. Om mogelijke schade aan onze leefomgeving te
voorkomen dient dit apparaat, gescheiden van gewoon
huishoudelijk afval, te worden afgevoerd zodat het op een
milieuvriendelijke manier kan worden gerecycled. Neem voor
beschikbare inzamelplaatsen contact op met uw gemeentelijke
reinigingsdienst of met uw elektronica leverancier.
the back panel of the product indicates that the product must not
be disposed of as normal household waste. To prevent possible
harm to the environment please separate the product from other
waste to ensure that it can be recycled in an environmentally safe
manner. Please contact your local government office or your
retailer for available collection facilities.
DISPOSITION
La poubelle sur roulettes barrées X, qui apparaît en logo
sur le panneau arrière du produit, indique que celui-ci ne doit pas
être traité comme un déchet domestique commun. Afin de
protéger l'environnement, ce produit électronique devra être géré
séparément et donc recyclé selon les nouvelles normes
Européennes Rohs concernant les déchets d'appareils
électroniques. Prière de contacter les services concernés
gouvernementaux ou votre point de vente pour l'élimination et
l'enlèvement de déchets électroniques équipés de composants
électroniques.
HÄVITTÄMINEN
Yliruksattua jäteastiaa kuvaava tarra tuotteen
takalevyssä kertoo, että tuotetta ei saa käsitellä normaalina
talousjätteenä. Ympäristön suojelemiseksi on tuote pidettävä
erillään muusta jätteestä ja se on kierrätettävä ekologisesti
kestävällä tavalla. Ota yhteyttä laitteen myyjään tai Pirkanmaan
Ympäristökeskukseen lähimmän kierrätyskeskuksen löytämiseksi.
AFSKAFNING
Logoet med en skraldespand med kryds over på
bagsiden af apparatet indikerer at dette produkt ikke må kasseres
som normal husholdningsaffald. For at forebygge mulig skade på
miljøet, bedes De separere dette produkt fra andet affald, og sikre
at det bliver genbrugt på en miljørigtig måde. Kontakt venligst de
lokale myndigheder eller din forhandler for oplysning om
nærmeste tilgængelige opsamlingssted for elektronikaffald.
DISPOSAL
La etiqueta cruzada hacia fuera del compartimiento que
aparece en el panel trasero del producto indica que el producto no
se debe reciclarse como basura normal de la casa. Para prevenir
daños posible al ambiente separe por favor el producto de otras
basura para asegurarse de que puede ser reciclada de una manera
ambientalmente segura. Entre en contacto por favor a su oficina
gubernamental local o a su minorista para las instalaciones
disponibles de la colección.
∆ΙΑ∆ΙΚΑΣΙΑ ΑΠΟΡΡΙΨΗΣ
ΤΟ
ΣΗΜΑ
ΜΕ
ΤΟΝ
∆ΙΑΓΕΓΡΑΜΜΕΝΟ
ΤΡΟΧΗΛΑΤΟ ΚΑ∆Ο ΑΠΟΡΡΙΜΑΤΩΝ ΣΤΗΝ ΠΙΣΩ ΟΨΗ
ΤΟΥ ΜΗΧΑΝΗΜΑΤΟΣ
RIFIUTI
L'etichetta del cassonetto barrato riportato sul retro
dell'apparecchio indica che il prodotto non deve essere smaltito
tramite la procedura normale di smaltimento dei rifiuti domestici.
Per evitare eventuali danni all'ambiente, separare questo prodotto
da altri rifiuti domestici in modo che possa venire riciclato in base
alle procedure di rispetto ambientale. Per maggiori dettagli
sulle aree di raccolta disponibili, contattate l'ufficio govenativo
locale od il rivenditore del prodotto.
∆ΗΛΩΝΕΙ ΟΤΙ ΤΟ ΠΡΟΙΟΝ ΑΥΤΟ ∆ΕΝ ΠΡΕΠΕΙ ΝΑ
∆ΙΑΧΕΙΡΙΣΘΕΙ
ΣΑΝ
ΣΥΝΗΘΙΣΜΕΝΟ
ΟΙΚΙΑΚΟ
ΑΠΟΒΛΗΤΟ.
ΠΡΟΣ ΑΠΟΦΥΓΗ ΕΝ∆ΕΧΟΜΕΝΗΣ ΕΠΙΒΑΡΥΝΣΗΣ ΤΟΥ
ΠΕΡΙΒΑΛΛΟΝΤΟΣ, ΞΕΧΩΡΙΣΤΕ ΤΟ ΠΡΟΙΟΝ ΑΠΟ ΤΑ
ΑΛΛΑ
ΑΠΟΡΡΙΜΑΤΑ
ΑΝΑΚΥΚΛΩΣΗ ΤΟΥ ΜΕ ΤΟΝ ΠΡΕΠΟΝΤΑ ΤΡΟΠΟ.
ΠΑΡΑΚΑΛΟΥΜΕ ΝΑ ΕΠΙΚΟΙΝΩΝΗΣΕΤΕ ΜΕ ΤΗΝ ΤΟΠΙΚΗ
ΥΠΗΡΕΣΙΑ ΑΝΑΚΥΚΛΩΣΗΣ ΜΕ ΤΟ ΚΑΤΑΣΤΗΜΑ
ΩΣΤΕ
ΝΑ
ΕΞΑΣΦΑΛΙΣΘΕΙ
Η
FACHGERECHTE ENTSORGUNG:
Η
Das auf der Geräterückseite angebrachte Label deutet
ΑΓΟΡΑΣ ΓΙΑ ΠΕΡΙΣΣΟΤΕΡΕΣ ΛΕΠΤΟΜΕΡΕΙΕΣ.
darauf hin, dass das Produkt nicht mit konventionellem
Hauskehricht entsorgt werden darf. Um Schäden und
Verschmutzungen an Umwelt und Mensch zu vermeiden, muss
das Produkt fachgerecht entsorgt und von anderem Abfall getrennt
werden. Wenden Sie sich bei Fragen hierzu an Ihren Fachhändler
oder an eine öffentliche Informationsstelle.
Issue 2: 27th September 2007
Page 6 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
A5.5 CD
INTRODUCTION
AUDIO CONNECTIONS
Congratulations on the purchase of your new A5.5 CD
player.
Outputs: Connect your amplifier inputs to the RCA
sockets on the back panel marked as LEFT and RIGHT
outputs. These are valve outputs for best in sonic
performance
If desired, the unit can also be attached to an external
DAC of your choice. The unit outputs COAX and
OPTICAL digital signal stream at 44.1kHz.
The A5.5 CD has extremely low jitter, vanishingly low
distortion, exemplary linearity and ultra low noise. Its
case design complements the A5.5 series components
which include an integrated amplifier all in the same
convenient size.
Great attention has been paid to internal layout,
isolating each circuit section to prevent possible
interaction.
POWER CONNECTIONS
The unit plugs into mains supply using IEC mains lead.
Do not force the connector.
The CD digital data streams are first up-sampled to
192kHz, which moves noise, jitter and distortion
artefacts well above the audio band. They are then
passed through a new, low noise, low distortion 24-bit
dual-differential digital-to-analogue converter, which
allows simpler filtering of the analogue output. This in
turn gives an improved audio response without the need
for sharp filters that degrade sound quality. The result is
a CD player which has a smoother response than
previously possible with none of the “hardness” of other
units.
SWITCHING ON
Use the supplied IEC mains cable to connect the unit to
the mains supply. Press the POWER button on the front
panel. The display will light, and the word MUTE
appears for about 30 seconds. This is to allow the valve
stage to warm up and settle. MUTE then disappears
indicating the unit is ready to use.
CLEANING
Another feature of the A5.5 CD is an additional high
quality ECC88 valve buffer stage output for added valve
warmth to the sound.
The resultant performance achieved by this unit is
among the best in the world. It has excellent signal to
noise ratio, low distortion, wide bandwidth, huge
dynamic range, extraordinary resolution and fine detail.
Before cleaning the unit, switch off power at the mains
switch and remove the mains plug from the wall socket.
Clean the cabinet and remote control unit using a moist
cloth. We do not advise using solvents, white spirit or
thinners as they could damage the surface finish.
NOTES ON USING COMPACT DISCS
Always hold discs by the edges and make sure they
remain clean - do not touch the surface. Keep discs away
from direct sunlight and heat sources, such as radiators.
Clean discs with a cloth before playing them, but do not
use solvents such as benzene, thinners, or antistatic spray
intended for analogue records.
After playing, always return the disc to its case for
storage.
INSTALLATION
Position the A5.5 CD on a stable, horizontal surface
where there is no risk of it being knocked, or subjected
to vibration such as from loudspeakers.
Protect your A5.5 CD from humidity - if the unit is
moved from a cold place to a warm room, or in generally
humid conditions, moisture can form on the pickup lens
inside the player, preventing the laser beam from reading
the disc. If this happens, remove the CD, close the
drawer, and leave the unit switched on for an hour or so
to allow sufficient time for the moisture to evaporate.
Issue 2: 27th September 2007
Page 7 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
FACILITIES AND CONNECTION
A5.5 CD
FRONT PANEL
1
2
3
4
5
6
7
8
9
1. CD DRAWER
6.STOP button
2. DISPLAY
7.PREVIOUS button
8.NEXT button
9.IR lens
3. ON/OFF switch
4. OPEN/CLOSE button
5.PLAY/PAUSE button
REAR PANEL
10
11
12
13
10. DIGITAL OPTICAL output
12. LEFT AND RIGHT valve audio outputs
11. DIGITAL COAXIAL output
13. IEC MAINS POWER inlet
Issue 2: 27th September 2007
Page 8 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
A5.5 CD
The universal remote control shown below enables functions from this and related units to be operated from a convenient distance.
Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other functions are only
available by remote control.
As the handset uses an invisible infra-red light beam, the front edge must be pointed directly towards the receiver window at the
front of the player, without visual obstruction between them.
If the range of the remote control greatly decreases, replace the batteries with new ones. Do not mix old and new batteries - two
are required, size AAA, LR03 or SUM-4.
Please dispose of used batteries in accordance to local regulations.
Tuner Buttons:
INFO – To access broadcast information
MENU – to choose options
AUTO TUNE – finds previous/next
broadcast
BAND – Selects DAB or FM
STORE – Stores station as preset
MONO/STEREO – Option for weaker
FM stations
SELECT – To choose preset/DAB
station
Amplifier Buttons:
PHONO – Selects Phono input
DIG 1 – Selects Digital 1 inputs
DIG 2 – Selects Digital 2 input
USB – Selects USB input
CD – Selects CD input
PRESET ↑ ↓ selects preset
TUNE ↑ ↓ steps up/down band
VOLUME UP/DOWN – sets
volume level
TUNER – Selects TUNER input
AUX/HT – Selects AUX 1/HT input
TAPE – Select TAPE input
CD Buttons:
MUTE – Mutes speaker outputs
until pressed again
DISPLAY – Dims display
TIME – Displays Track Time/Time
remaining
0-9 Buttons – Used to select track
numbers
CHECK – Check pre programmed
tracks
CLEAR – Clears selected pre
programmed track
PROGRAM – Programs selection and
order of tracks
A/B Sets repeat start/end to repeat
section of track
INTRO – Player plays first 10 seconds
of each track
SHUFFLE – Plays back tracks in
random order
REPEAT – Repeats whole disk or
selected tracks
TRACK – Next/previous track
PAUSE/PLAY – Stop/start CD
playback
SEARCH – Fast forward/backward
through track
STOP – Stop playing/Eject CD
Issue 2: 27th September 2007
Page 9 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD BASIC OPERATION
A5.5 CD
LOADING AND PLAYING COMPACT DISCS
TRACK SELECTION (Remote control)
Simply press the PLAY button to start a CD playing
from the first track.
NO DISC
Alternatively, a specific track can be selected directly by
pressing one of the ten track number buttons grouped in
the centre-section of the remote control. The chosen
track then plays after a short delay of about 5 seconds.
To play a track number with two digits, press the second
digit button on the remote control within this delay
period, example for track 17:
To load a disc, press OPEN/CLOSE button to gain
access to the tray.
Display will show “OPEN”
OPEN
Press 1:
When the tray is fully extended, gently place the disc,
with the label facing upwards, centrally into the
indentation and press the OPEN/CLOSE button again so
the displays show “CLOSE”.
PLAY
1
Press 7 within about 5 seconds:
PLAY 17
CLOSE
The unit will scan the contents of the disc. After a short
delay, the display windows then show the total number
of tracks available on the CD, and total playing time. In
the following example there are 7 tracks, lasting a total
of 41 minutes 56 seconds
After a small pause, machine plays selected track:
PLAY 17 0:01
If a track number is chosen which is not available on the
disc, for example pressing button number 9 if the CD
has only 7 tracks, an INVALID TRACK message is
briefly displayed (along with elapsed time of last track
played).The display then indicates STOP, and shows the
number of tracks available on the CD and total playing
time, as in the above example.
STOP
7
41:56
PAUSE
Pressing the PLAY/PAUSE button on the front or top
panel whilst a disc is playing pauses playback of the
disc. PAUSE appears in the display windows instead of
PLAY. The disc will continue spinning, but the track
does not advance and the CD's output is muted.
DISC PLAY
If PLAY/PAUSE is pressed, the unit will begin playing
from track 1, confirmed by the word PLAY appearing
on the left of the display, with 1 in the centre and
elapsed time on the right.
PAUSE 1
0:03
PLAY
1
0:01
Pressing PLAY/PAUSE again resumes playback from
the same place.
When all tracks on the CD have been played, the display
shows STOP and total number of tracks on the disc.
PAUSE (Remote control)
On the remote control, PLAY and PAUSE buttons have
separate functions at each end of the same button.
Pressing PLAY will only control disc play, and Pressing
PAUSE will not resume play. Note that if the disc is
already playing, pressing the PLAY button reverts to the
beginning of the current track.
STOP
7
TRACK SELECTION
To change track, the track skip buttons PREVIOUS and
NEXT on the front panel can be pressed to jump
forwards or backwards one track in either direction.
Corresponding TRACK buttons on the remote control
are marked |<< and >>|.
If the unit has stopped playing, a specific track can be
accessed directly by pressing either PREVIOUS or
NEXT to obtain the required track number, then
pressing PLAY/PAUSE.
STOP
Playback can be stopped at any time by pressing the
STOP button once. On the remote control, press either
end of the button, not the middle part. If mains power to
the unit is switched on with a disc already loaded, it will
automatically search for the disc.
Issue 2: 27th September 2007
Page 10 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD SPECIAL FEATURES
A5.5 CD
REPEAT PLAYBACK
This function is obtained by pressing SHUFFLE on the
remote control with the unit either stopped or playing. If
the A5.5 is already playing, play will continue in
random order until all tracks on the disc have been
played.
Shuffle play is cancelled by pressing the SHUFFLE
button a second time. The unit resumes normal play
function, continuing to the end of the disc in normal
order starting from wherever it was left by the previous
random selection.
The REPEAT button on the remote control allows the
repeated playback of either one track or all tracks on the
disc.
By pressing the REPEAT button once, only the current
track is repeated, and the display shows
PLAY
repeat track
1
0:12
If the REPEAT button is pressed a second time,
“repeat disc” is displayed instead, and the entire disc is
then played repeatedly.
From stop mode, pressing PLAY/PAUSE also begins
shuffle play.
If REPEAT is then pressed whilst in shuffle mode, a
repeat shuffle function is obtained
PLAY
1
0:24
repeat disk
PLAY
7
0:39
repeat shuffle
Pressing REPEAT a third time cancels repeat mode.
Pressing >>| selects the next track in random order.
A-B REPEAT PLAYBACK
“A-B repeat” provides the option of playing just a
certain section of the disc over and over again.
Find the beginning of the required section either by
listening, or using the display time as a guide.
When the desired starting point is reached, press button
A / B on the remote control.
SCAN INTRODUCTION
The scan-introduction function allows play back of just
the start of each track on the disc, for instance to locate a
preferred track by ear.
Press INTRO on the remote control, and if the player
has stopped, the display will show
The display will show
STOP 74
scan intro
PLAY
repeat a-
1
0:34
The first ten seconds (approximately) of each track on
the CD can then be played in sequence by pressing
either PLAY/PAUSE on the front panel, or PLAY on
the remote control.
When the disc has reached the end of the required
section, press the A / B button again, to display and the
unit
PLAY
repeat a-b
1
1:55
Press INTRO again to cancel introduction search mode.
If INTRO mode is cancelled while the A5.5 is still
playing, the remainder of the entire disc will be played.
continuously plays the selected part of the disc in this
case, the segment of track 1 from 34 seconds to 1 minute
55 seconds.
To cancel A-B repeat mode, press A / B on the remote
control.
PROGRAMMED PLAY
The built-in program memory allows you to store up to
99 track numbers and then play them back in the held
order. Each track is stored as a “step” in the program.
With the CD loaded and the player stopped, first press
PROGRAM on the remote control. The following is
then displayed :
SHUFFLE PLAYBACK
The SHUFFLE feature allows tracks on the discs to be
played in random sequence rather than the normal
consecutive order.
STOP 74
program 1 track 0
PLAY
1
0:34
On the remote control, press the numeric button of the
track number corresponding to the first track you wish
to store (number 3 for example).
shuffle disc
Tracks are also played in a different order each time the
disc is restarted, or another disc loaded.
Issue 2: 27th September 2007
Page 11 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD SPECIAL FEATURES
A5.5 CD
That track number will now appear in the display:
When all programmed tracks have been played, the CD
player stops. The same track selection can then be
played again by pressing the PLAY/PAUSE button on
the front panel, or PLAY on the remote control.
To repeat a programmed sequence continually, press
REPEAT whilst playing the program.
STOP 74
program 1 track 3
Press PROGRAM again on the remote control - the
next program step is selected, (program 2) and the track
number revert to 0 ready for a new entry.
To cancel this mode, press PROGRAM.
STOP 74
program 2 track 0
Note: The program contents will be cleared if you
switch off the power, or open the tray and load another
disc. If, however, the same disc is loaded again with
the power still switched on, the program sequence is
retained in the memory.
Continue entering track numbers in the same way up to
a maximum of 25. If more than 25 tracks are attempted
the memory will not accept any extra ones, and the
display reverts to “program 1”.
DISPLAY
Remember that when entering a single-digit track
number, there is a delay of about two seconds before the
display accepts the entry - this is to allow time for a
second button to be pressed when a double-digit number
is required.
A5.5 display brightness can be controlled in three levels
by pressing the DISPLAY button on the remote control.
The original setting is maximum brightness, but by
pressing the DISPLAY button once, brightness is
reduced, and a further press turns the display off.
If an incorrect entry is made, say track 99 when there
are only 7 tracks available on the disc, a brief error
message is displayed
INVALID TRACK
program 2 track 9
If at any time you wish to add a track to the list, press
the CLEAR button to obtain the next step number.
Alternatively, to delete a previous entry, press CLEAR
a second time to remove the last entry. Repeated
pressing of CLEAR will then erase each step in reverse
order. So to delete an entire program sequence from the
memory, press CLEAR repeatedly until “program 1” is
shown in the display.
When the last track number has been entered, press
PROGRAM a final time, then the PLAY button to start
the program sequence.
PLAY
1
0:41
play program
If you wish to check the selection before playing back
your program, the CHECK button can be pressed to
step through each program entry in turn.
If during this check sequence the PLAY button is
pressed, the remaining part of your programmed
selection will play to the end of the sequence.
Otherwise, to play all the programmed tracks from the
beginning of the sequence, press PLAY/PAUSE, or
PLAY on the remote control.
The >>| button may be pressed to jump to the next
track in the programmed sequence, or
|<< button to obtain the previous track in the sequence.
Issue 2: 27th September 2007
Page 12 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD PROBLEMS?
A5.5 CD
Basic problem-solving with a CD player is similar to troubleshooting other electrical or electronic equipment. Always check the most obvious
possible causes first, such as the following examples:
Problem
No power / display
Probable Cause
Remedy
Power plug is not inserted into psu correctly
Plug in securely fully into power supply’s
A5.5 rear socket
No playback when disc is loaded, “NO
DISC” displayed
Disc is loaded with label side down
Incorrect disc type
Re-load with label side up
Please load a standard audio CD
Clean disk and try again
Dirty disc
Moisture/humidity or cold affecting laser lens
Leave unit on for an hour to allow moisture
to evaporate.
No audio output, or too low level output Incorrect or missing connections
Check connections and make sure they are
secure.
Hum
Audio connector plug not fully pushed in
Cable Fault
Insert plug securely
Check cable is connected at both ends.
Unsuitable Cable
N.B. some esoteric cables have internal
wiring intentionally disconnected/modified.
For best results on all inputs analogue AND
digital, please use good quality screened
coax; signal and screen directly connected
both ends.
(e.g. cable grounds not connected)
Miss-tracking (sound jumping)
Player is receiving vibration or shock
Disc is dirty
Change position of player away from
loudspeakers
Clean disc surface
Moisture/humidity or cold affecting laser lens.
Leave unit on for an hour to allow moisture
to evaporate.
Interference noise heard from radio
tuner
Player is positioned too near the tuner
Keep a reasonable distance between player
and tuner, or switch off player power
Remote control does not work
Power supply switch is set to off
Set switch to on
Battery(ies) fitted the wrong way round
Insert batteries correctly
Batteries are flat
Change batteries for a new set
Remote control is not pointed directly towards the
front panel of the player
Ensure there is no obstruction between the
remote control and player front
Remote control range has greatly
reduced
Batteries are running out
Change batteries – for a new set
This product contains a PHILIPS CD mechanism, which complies with the PHILIPS/SONY red book CDDA
standard. It is guaranteed to play all disks similarly marked without any problems.
Please note that due to “piracy” concerns, some record companies/pressing plants are creating disks that do
not adhere to this standard. Such disks may –or- may not play in some –or- all CD player products of any
manufacturer. We advise caution in using these disks, as the information contained therein has been
deliberately manipulated and can cause audio degradation and/or playability problems.
We also advise caution with using cheap CD-R, and/or CD-RW disks for audio, and to ensure all home-generated CDs intended for
playback on this unit are recorded as CDDA AUDIO CDs (i.e. not MP3, WAV, etc.) on good quality media.
Remember - the most vulnerable part of a CD playing system is the disc itself. The most likely cause of a disc not playing is that the disc itself is
faulty, scratched or simply dirty. Never open the case of the unit yourself, as this will invalidate the guarantee. If none of the above actions affect
a cure, please contact your dealer or Musical Fidelity service agent.
Issue 2: 27th September 2007
Page 13 of 15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD SPECIFICATIONS
A5.5 CD
Output impedance
50 Ohms
DAC:
DAC circuit
Total correlated jitter
Linearity
24 bit Delta-Sigma (Bit stream) dual differential 8X over sampling
< 135 pS
< 0.1dB down to -96dB
Output digital 0dB level
Frequency response
Channel separation
Signal / noise ratio
Total harmonic distortion
2.18VRMS at 1 kHz nominal
10Hz to 20 kHz -0.2dB max
> 105dB 20Hz to 20 kHz
> 117dB “A” weighted
< 0.003% 10Hz to 20 kHz
Connections:
Line level outputs:
Digital outputs
1 pair RCA Valve outputs
1 S/PDIF (RCA connector)
1 optical (TOSLINK)
Power requirement:
Standard accessories:
100 / 115 / 230Volts AC
50 / 60Hz (factory pre-set),
22 Watts maximum
8 Watts idle
A5.5 Power supply lead
Mains lead
Remote control
Batteries
1.0 m
1 off
1 off
1 off
2 off
10 Amp IEC type
A5.5, universal
Size LR03 or AAA
manganese alkaline type
Dimensions:
Unit Only
440 mm
125 mm
385mm
17⅓ inches
5 inches
15¼ inches
wide
high
deep inc. terminals
Unit in shipping carton
555 mm
290 mm
525 mm
22 inches
11 ½ inches
20 ¾ inches
wide
high
deep
Weight:
11.2 kg,
15.7 kg
24 ¾ lbs
34 ½ lbs
Unboxed
In shipping carton , including all
accessories
Musical Fidelity reserves the right to make improvements which may
result in specification or feature changes without notice.
Issue 2: 27th September 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 14 of 15
MANUAL REVISION
A5.5 CD
RELEASE
DATE
CHANGES
Issue 1
1st September 2007
27th September 2007
1st release
Updated description front
page
Issue 2
Issue 2: 27th September 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 15 of 15
|