eG-05012B
Effective 03-05
Catalog Section 40
(00-02-0593)
Digital Auto-Start/Stop/Throttling
Engine Controller
eGUARD Controller
■
Compatible with Electronic (ECU)
and Standard (MPU) engines
■
■
■
J1939 Ready – works directly with our
MurphyLink J1939 PowerView gages
Automatic Speed Control - throttles
engine speed based on analog inputs
Engine Diagnostics – provides most
common descriptive faults when con-
nected to electronic engines
Description
Features
Here are some of the unique features only Murphy’s
eGUARD can offer you at our competitive price.
Standard Components
–
–
–
–
–
–
–
–
–
24 - Digital inputs
The eGUARD is a state-of-the-art controller. It will
meet virtually all of your engine-driven equipment
application requirements. The eGUARD has been
designed from the ground up to control today’s elec-
tronic engines using J1939 and can easily control
the traditional non-electronic engines.
8 - Analog inputs (one battery dedicated)
1 - Magnetic pickup input
8 - 20A Form “C” relays
1 - RS232 port
●
Throttling Input: The eGUARD can be config-
ured to control engine speed using most types of
analog input devices (0-5v, 1-5v or 4-20 mA).
1 - RS485 port
●
Throttling Output: CANbus J1939* or incre-
ment/decrement relay pulse.
1 - RS232/RS485 port
1 - J1939 port
1 - 64 x 128 pixels full graphic
LCD display with backlight
1 - 12-position keypad
The eGUARD can be configured to automatically
or manually operate most types of applications,
from a simple start/stop sequence to complex auto-
matic throttling. Pumps, Compressors, Chippers,
Grinders and Power Units are just a few of the ideal
industrial applications for the eGUARD.
The eGUARD controller can maintain constant
pressure, flow or level by automatically increasing
or decreasing engine speed.
*(when supported by the ECU manufacturer)
●
●
●
Compatibility: Accepts Magnetic Pick-up (MPU)
or ECU J1939 speed signals.
Field Configurable: Allows password protected
configuration changes through the keypad.
Field Programmable: Flash-based microprocessor
allows for easy upgrades or reconfigurations
using a PC or laptop.
–
Optional Accessories
●
PVA Series Gages (Bulletin: PV-02125B)
Remote Relay Board
Mimic Annunciator allows for wired remote
●
●
Warranty
●
●
Sealing: Maintains NEMA4 and IP65 rating when
properly mounted in a rated enclosure.
J1939 Ready; Works directly with Murphy’s
J1939-ready PowerView gages, just plug and go,
no sender required.
A limited warranty on materials and workmanship is
given with this FW Murphy product.
operation and monitoring (Call Murphy IPD for
more information)
A copy of the warranty may be viewed or printed by
eG-05012B page 1 of 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|