Dual Ethernet ProxyServer
Model MTPSR1-120
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 1 - Introduction and Description
Introduction ................................................................................................................................................ 6
Preview of this Guide ................................................................................................................................. 6
Front Panel Description.............................................................................................................................. 8
Back Panel Description .............................................................................................................................. 9
RS232/V.35 Connector ........................................................................................................................ 9
Ethernet 1 and 2 10Base-T Connectors .............................................................................................. 9
Command Connector ........................................................................................................................... 9
Power Connector ................................................................................................................................. 9
Specifications ........................................................................................................................................... 10
Ethernet Ports .................................................................................................................................... 10
Command Port................................................................................................................................... 10
WAN Link ........................................................................................................................................... 10
Electrical/Physical .............................................................................................................................. 10
Chapter 2 - Installation
Safety Warnings ....................................................................................................................................... 12
Unpacking Your ProxyServer ................................................................................................................... 12
V.35 Shunt Procedure .............................................................................................................................. 13
Cabling Your ProxyServer ........................................................................................................................ 14
Chapter 3 - Software Loading and Configuration
Loading Your Software ............................................................................................................................. 18
IP Port Configuration.......................................................................................................................... 20
Default WAN Link Configuration ........................................................................................................ 21
Chapter 4 - Firewall Software
Introduction .............................................................................................................................................. 24
Typical Applications .................................................................................................................................. 24
Configuration 1 - Cable/DSL Modem ................................................................................................. 24
Configuration 2 - Existing Dual-LAN with Router ............................................................................... 26
Configuration 3 - New Dual-LAN with T1 DSU................................................................................... 27
Firewall Program Group ........................................................................................................................... 29
Firewall Configuration............................................................................................................................... 31
Changing IP Parameters .......................................................................................................................... 32
Changing WAN Port Parameters ............................................................................................................. 34
Adding Proxy Applications........................................................................................................................ 35
Enabling the DHCP Server....................................................................................................................... 36
Enabling PPP/SLIP .................................................................................................................................. 37
Applications .............................................................................................................................................. 39
Statistics ................................................................................................................................................... 39
Filtering .................................................................................................................................................... 40
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 - Remote Configuration and Management
Introduction .............................................................................................................................................. 42
Modem-Based Remote Configuration Procedure..................................................................................... 42
LAN-Based Remote Configuration Procedure ......................................................................................... 44
Windows Sockets Compliant TCP/IP Stack ....................................................................................... 44
Remote Management ............................................................................................................................... 46
Telnet ................................................................................................................................................. 46
WEB Management............................................................................................................................. 48
Chapter 6 - Warranty, Service and Tech Support
Introduction .............................................................................................................................................. 50
Limited Warranty ...................................................................................................................................... 50
On-line Warranty Registration............................................................................................................ 50
Tech Support ............................................................................................................................................ 51
Recording ProxyServer Information................................................................................................... 51
Service ..................................................................................................................................................... 52
The Multi-Tech BBS ................................................................................................................................. 53
To Log on to the Multi-Tech BBS........................................................................................................ 53
To Download a File ............................................................................................................................ 53
About CompuServe .................................................................................................................................. 54
About the Internet..................................................................................................................................... 54
About the Multi-Tech Fax-Back Service ................................................................................................... 54
Appendixes
Appendix A - TCP/IP (Transmission Control Protocol/Internet Protocol) Description ............................... 56
Index
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 - Introduction and Description
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Introduction
Welcome to Multi-Tech's new Dual Ethernet ProxyServer, model number MTPSR1-120, a high
speed Internet access device that provides firewall protection to your corporate (secured) LAN
and allows Internet access to the Internet Services Network (public LAN) that resides outside the
firewall. Internet access can be provided through new technologies, such as cable or DSL
modems, connecting to an existing high speed public LAN, or connecting the RS232 WAN port
on the back of the unit that allows Internet access up to T1/E1 access speeds. The Dual Ethernet
ProxyServer provides two Ethernet connections that implement firewall protection and gateway
security for your LAN resources and provides megabit data transfer rates (up to 20 times faster
than a 56K modem) for your Internet access.
The Dual Ethernet ProxyServer provides two Ethernet 10Base-T ports which connect your
private secured LAN to the LAN 1 connection and the Internet Services Network resources to the
LAN 2 connection, and a Command port for configuration. An additional RS232/V.35 port is
provided for an alternate connection to an external WAN for connecting your secure corporate
LAN directly to an ISP. System management is provided through the command port using
bundled Windows® software which provides easy-to-use configuration menus.
Figure 1-1. Dual Ethernet ProxyServer
Preview of this Guide
This guide describes the ProxyServer and tells you how to install and configure the unit. The
information contained in each chapter is as follows:
Chapter 1 - Introduction and Description
Chapter 1 describes the Dual Ethernet ProxyServer. Descriptions of Transmission Control
Protocol/Internet Protocol (TCP/IP) and Internet Protocol (IP), front panel indicators, and back
panel connectors are provided. In addition, a list of relevant specifications is provided at the end
of the chapter.
Chapter 2 - Installation
Chapter 2 provides information on unpacking and cabling your ProxyServer. The installation
procedure describes each cable connection.
Chapter 3 - Software Loading and Configuration
Chapter 3 provides instructions for software loading and initial configuration. The ProxyServer
software diskettes are Windows® based. Later chapters, as well as your on-line help program will
describe the ProxyServer software in more detail.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 - Introduction and Description
Chapter 4 - ProxyServer Software
Chapter 4 describes the ProxyServer software package designed for the Windows ®
environment. This chapter describes the ProxyServer software from an applications standpoint,
and in so doing, not every screen is shown, nor is each field within a screen defined. For
explanations and parameters of each field within a dialog box please refer to the on-line help
system provided within the software.
Chapter 5 - Remote Configuration and Management
Chapter 5 provides procedures for changing the configuration of a remote ProxyServer. Remote
configuration allows you to change the configuration of a unit by simply connecting two modems
between the two ProxyServers and remotely controlling the unit. In addition, remote management
utilities such as Telnet and Web-based management of the ProxyServer
Chapter 6 - Warranty, Service and Tech Support
Chapter 6 provides instructions on getting service for your ProxyServer at the factory, a
statement of the limited warranty, information about our Internet presence, and space for
recording information about your ProxyServer prior to calling Multi-Tech’s Technical Support.
Appendixes
Appendix A - TCP/IP (Transmission Control Protocol/Internet Protocol) Description
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Front Panel Description
The front panel, shown in Figure 1-2, contains four groups of LEDs that provide the status of the
LAN connection, link activity, and general status of the ProxyServer. The Ethernet 1 and Ethernet
2 LEDs display the activity of the public and private LANs, in whether the ProxyServer is
connected to the LAN, transmitting or receiving packets, and if a collision is in progress. The
WAN Link LEDs display the status of the RS232/V.35 WAN link, that can optionally be connected
to an external DCE device, in whether the link is ready to transmit or receive serial data, and if an
external communications device with a V.35 interface is connected to the ProxyServer. The last
group of LEDs indicate whether the self test passed or failed and if the power On/Off switch on
the back of the ProxyServer is turned On.
Figure 1-2. Front Panel
ETHERNET 1 and 2
RCV Receive Data indicator blinks when packets are being received from the private (Ethernet
1) or public (Ethernet 2) LANs.
XMT Transmit Data indicator blinks when packets are being transmitted to the private
(Ethernet 1) or public (Ethernet 2) LANs.
LNK
Link indicator lights when the Ethernet link senses voltage from a concentrator or
external device.
WAN Link
RCV Receive Data indicator blinks when packets are being sent to the local area network.
XMT Transmit Data indicator blinks when packets are being transmitted from the local area
network.
CD
Carrier Detect indicator lights when a carrier signal is detected on the WAN link.
V.35 indicator lights when internal shunt is set for V.35 operation.
V35
Fail
ERR Error indicator lights when the ProxyServer is booting or downloading setup.
Power
PWR Power indicator lights when power is applied to the ProxyServer.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 - Introduction and Description
Back Panel Description
The cable connections for the ProxyServer are made at the back panel. In addition to the Power
connector, Three groups of connectors are used on the ProxyServer: the Command Port,
Ethernet 1 & 2 (10BASET) and RS232/V.35. The cable connections are shown in Figure 1-3 and
defined in the following groups.
ETHERNET
COMMAND
POWER
RS232/V.35
2
1
ON
OFF
10BASET
10BASET
Figure 1-3. Back Panel
RS232/V.35 Connector
The RS232/V.35 (DB-25) connector is used to connect the ProxyServer to an external modem,
DSU, or other Data Communications Equipment (DCE). This connection can be either RS232C
(default) or V.35. If the connection is V.35, then the shunt must be moved from the default RS232
position to the V.35 position (for details on this procedure, refer to Chapter 2 - V.35 Shunt
Procedure).
Ethernet 1 and 2 10Base-T Connectors
The Ethernet 10Base-T connectors are used to connect the ProxyServer to a LAN using
unshielded twisted cable. Ethernet 1 connects the private LAN, and Ethernet 2 connects the
public LAN. These connectors are RJ-45 jacks.
Command Connector
The Command connector is used to configure the ProxyServer using a PC with a serial port and
running Windows® software. The Command connector is an RJ-45 jack and a short adapter
cable is provided to convert to a standard serial port DB-25 female connector.
Power Connector
The Power connector is used to connect the external power supply to the ProxyServer. The
Power connector is a 6-pin circular DIN connector. A separate power cord is connected to the
power supply and the live AC grounded outlet.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Specifications
•
Protocols - Point-To-Point Protocol (PPP), and Serial Line Internet Protocol (SLIP)
Ethernet Ports
•
Two Ethernet Interface - 10Base-T (twisted pair) RJ-45 connectors.
Command Port
•
Single 19.2K bps asynchronous Command Port using a short RJ-45 to DB-25 cable with a
DB-25 female connector
WAN Link
•
One RS232/V.35 port connector.
Electrical/Physical
•
•
•
•
Voltage - 115 VAC (Standard), 240 Volts AC (Optional)
Frequency - 47 to 63 Hz
Power Consumption - 10 Watts
Dimensions - 1.625" high x 6" wide x 9" deep
5.63cm high x 22.34cm wide x 33.51cm deep
Weight - 2 pounds (.92 kg)
•
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 - Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Safety Warnings
1.
Never install telephone wiring during a lightning storm.
2.
Never install telephone jacks in wet locations unless the jack is specifically designed for
wet locations.
3.
Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
4.
5.
Use caution when installing or modifying telephone lines.
Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electrical shock from lightning.
6.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Unpacking Your ProxyServer
The shipping box contains the Dual Ethernet ProxyServer, external power supply, power cord,
Command Port (DB-25 to RJ-45) cable, your Quick Start Guide, and three diskettes (i.e., the
ProxyServer User Guide, and the ProxyServer Software). Inspect the contents for signs of any
shipping damage. If damage is observed, do not power up the unit, contact Multi-Tech’s Technical
Support for advice (refer to Chapter 6). If no damage is observed, place the ProxyServer in its
final location and continue with the next section.
MADE IN U.S.A
MADE IN U.S.A
Figure 2-1. Unpacking
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 - Introduction and Description
V.35 Shunt Procedure
If you are using an external DCE device on the WAN RS232/V.35 port, and the connection will be
a V.35 connection, the internal shunt must be moved from the RS232C (default) position prior to
cabling and power-up. The following steps detail the procedures for switching the shunt.
Step Procedure
1
2
Ensure that the external power supply is disconnected from the ProxyServer.
Turn the ProxyServer over and remove the cabinet mounting screw from the chassis.
Back Panel
Front Panel
Cabinet Mounting Screw
Figure 2-2. Cabinet Mounting Screw
3
Being sure to support the back panel, turn the ProxyServer right-side-up, tilt the back
panel down, and slide the circuit board out of the chassis.
4
5
Place the unit on a flat, grounded surface with the LED’s facing you.
Pry the shunt out of the RS232 position, and insert it in the V.35 position.
Back Panel Connectors
LEDs
V.35 Shunt Position
RAM Sockets
RS232C Shunt Position
Figure 2-3. Shunt Positions
6
7
8
Align the board with the guide slots on the inside of the chassis and carefully slide the
board back into the chassis.
Being sure to support the back panel, turn the ProxyServer over again, and replace the
cabinet mounting screw.
Turn the ProxyServer right-side-up again and proceed to the next section to connect the
cables.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Cabling Your ProxyServer
Cabling your ProxyServer involves making the proper Power, Command Port, and two Ethernet
connections. An optional WAN connection is provided to connect to an external WAN device.
Figure 2-4 shows the back panel connectors and the associated cable connections, and the table
that follows details the procedures for connecting the cables to your ProxyServer.
ETHERNET
COMMAND
POWER
2
1
ON
RS232/V.35
OFF
10BASET
10BASET
Power
Connection
WAN
Connection
Internet
LAN
Secured
LAN
PC
Connection
Figure 2-4. Cable Connections
Cabling Procedure
Step
Procedure
1.
Connect one end of the power supply to a live AC outlet and connect the other end to the
ProxyServer as shown in Figure 2-4. The power connector is a 6-pin circular DIN
connector.
2.
Connect the ProxyServer to a PC by using the short RJ-45 to DB-25 (female) cable
provided in your unit. Plug the RJ-45 end of the cable into the Command port of the
ProxyServer and the other end into the RS-232 cable from the PC serial port. See Figure
2-4.
3.
4.
To connect your secure (private) LAN, connect one end of an RJ-45 (UTP) cable to the
LAN 1 connector on the back of the ProxyServer. Connect the other end of the cable to
your private LAN.
To connect a cable modem, DSL modem, or your Internet (public) LAN, connect one end
of an RJ-45 (UTP) cable to the LAN 2 connector on the back of the ProxyServer.
Proceed to step 6.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 - Installation
Table 2-1. (cont’d.)
Step
Procedure
5.
If a cable modem, DSL modem, or your Internet LAN is being used, no cable connection
will be made to the RS232/V.35 connector on the back of the ProxyServer.
If the RS232/V.35 connector on the ProxyServer is going to be connected to a WAN
device (i.e., connecting your secure (private) LAN to an ISP, connect one end of an
RS232 or V.35 interface cable to the RS232/V.35 connector on the back of the
ProxyServer. Connect the other end of this cable to the WAN device.
6.
Turn on power to the ProxyServer by placing the ON/OFF switch on the back panel to
the ON position. Wait for the Fail LED on the ProxyServer to go OFF before proceeding.
This may take a couple of minutes to go OFF.
At this time your ProxyServer is completely cabled. Proceed to Chapter 3 to load the Firewall
software.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 - Software Loading and Configuration
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Loading Your Software
The following loading procedure does not provide every screen or option in the process of
installing the Firewall software. The assumption is that the installation is being performed by a
technical person with a thorough knowledge of Windows and the software loading process.
Additional information on the Firewall software is provided in the Chapter 4, and in the on-line
help provided with your Firewall software.
1.
2.
Run Windows on the PC connected to the Command Port.
Insert the ProxyServer diskette labeled Disk 1 into the disk drive on the PC connected to
the Command port.
3.
Win3.1 users - In Program Manager click File | Run. In the Run dialog box, type
a:\setup or b:\setup (depending on the location of your floppy disk drive) in the
Command Line field and then click OK.
Win95 users - click Start | Run. In the Run dialog box click on the down arrow and
choose a:\setup or b:\setup (depending on the location of your floppy disk drive) in the
Command Line field and then click OK.
4.
Follow the on-screen instructions to install your Firewall software.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 - Software Loading and Configuration
5.
The following dialog box selects the COM port of your PC connected to the Command
port of the ProxyServer. From the Select Port window, click on the down arrow and
choose the COM port of your PC.
Click OK to continue.
6.
Click Finish to continue.
7.
The “Do you want to download default setup?” dialog is displayed.
Click Yes to download the default setup. Clicking No prevents the defaults from being
down loaded to the ProxyServer.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
IP Port Configuration
This dialog allows for the configuration of IP parameters that are generally applicable to IP
proxying on all ports.
8.
The Secured LAN Port Parameters have to be changed to your private (secure) LAN
parameters. Enter your Secured LAN Port IP Address in the IP Address field, followed by
the Net Mask in its field, and finally the Default Route IP address.
The Secured LAN Port IP Address can be an unregistered IP address. The Internet LAN
port IP address and the Gateway IP address must be in the same IP network.
9.
The Internet LAN Port Parameters depend on how LAN 2 on the ProxyServer is
configured. If a DHCP Server is providing IP addresses, click on the OK button and
proceed to step 13.
If a DHCP Server is not providing the IP address, then click on the DHCP Client option
and the IP Address and Net Mask fields become active. Enter your valid Public LAN IP
address in the IP Address field, also, enter your valid Net Mask in its field.
DHCP Relay Agent does not apply.
10.
If a cable modem, DSL modem, or your public (Internet) LAN is connected to LAN 2 on
the ProxyServer, the WAN Port Parameters are not required.
The WAN Port Parameters are only required if a device is connected to the RS-232/
V.35 connector on the back of the ProxyServer. If your ISP for your local (secured LAN)
dynamically assigns the WAN port IP addresses, you do not have to do anything for the
WAN Port Parameters. Proceed to the step 12.
If a static WAN Port IP address needs to be assigned, click on the ISP assigns Dynamic
Address check box to disable the feature, then click on the IP Address field and enter
your registered WAN Port IP address. Also, enter the Net Mask for WAN port.
11.
If a DHCP Server is not providing the IP addresses in step 9 and a cable modem, DSL
modem, or your public (Internet) LAN is connected to LAN 2 on your ProxyServer, then
click on the Internet LAN IP Address field and enter the valid Gateway IP address (i.e.,
the IP address of the cable or DSL modem, or your public (Internet) LAN router’s
address).
If a static WAN Port IP was assigned in step 10 and the Internet access is through the
RS232 connection on the back of the ProxyServer, then click on the Internet Gateway
Parameters WAN option.
12.
Click OK.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 - Software Loading and Configuration
Default WAN Link Configuration
The default WAN Link(s) Setup dialog box is only used if a device is connected to the RS-232/
V.35 connector on the back panel of the ProxyServer. This connection allows your private
(secured) LAN to be connected to a local ISP for Internet service.
If a cable modem, DSL modem, or your public (Internet) LAN is connected to LAN 2, then the
Default WAN Link has to be disabled.
13.
If a cable modem, DSL modem, or Internet LAN is connected to LAN 2, click on the
Enable option to disable the WAN port. Click OK and proceed to step 18 to download the
default setup.
If a device is connected to the RS-232/V.35 connector on the back of the ProxyServer,
proceed to step 14.
14.
15.
Click on the down arrow for the Modem Type and choose the device from the listing that
is connected to the RS-232/V.35 connector.
Click on Dial Number and enter the telephone number supplied by your ISP. The
telephone number can be a standard local number and it can include a long distance
prefix.
16.
Click on User Name and enter your user name that you negotiated with your ISP. The
User Name can be up to 40 alphanumeric characters. The User Name is not case
sensitive.
17.
18.
Click on Password and enter your password that you negotiated with your ISP. The
password can be up to 15 alphanumeric character and also is not case sensitive.
Turn on power to the ProxyServer and the checking ProxyServer dialog box is displayed.
The Setup utility is "Ready to Download default Setup Choose OK to proceed." Click OK
to proceed.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
19.
The Writing Setup dialog box is displayed as the setup configuration is written to the
ProxyServer.
20.
21.
Check to ensure that the FAIL LED on the ProxyServer is Off after the download is
complete and the ProxyServer is rebooted.
Win3.1 users - you are returned to your Program Manager where the Firewall Program
Group and Program Item (Windows icons) have been created.
Win95 users - you are returned to the Firewall folder which will be visible on your
desktop.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 - Firewall Software
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Introduction
This chapter describes the Firewall software used in the Dual Ethernet ProxyServer. It begins
with the description of three typical applications for the ProxyServer. These configuration
examples are followed by a description of the Firewall program group, and examples of how to
add some of the advanced features provided with the software.
Typical Applications
This section describes three typical applications for the Dual Ethernet ProxyServer. This is done
with the assumption that the unit will be configured for a particular application during the initial
installation. The three examples include a detailed diagram, along with a description of the
process involved in setting up the configuration shown.
The first of the applications uses the ProxyServer to connect your private LAN to the Internet
using a cable or Digital Subscriber Line (DSL) modem, providing high speed Internet access. The
second application ties your private LAN and public Internet Services Network (e.g., your existing
public LAN) through its router to the Internet. The third application is similar to the second, but
uses a Data Communications Equipment (DCE) device—in this example, a T1 DSU—connected
to the RS232 port on the back of the ProxyServer to connect to the Internet.
Configuration 1 - Cable/DSL Modem
In the configuration shown in Figure 4-1, the Dual Ethernet ProxyServer is connected to the
private LAN via the LAN 1 connection of the back of the ProxyServer. Connection to the Internet
is then provided by the cable or DSL modem by connecting the Ethernet connector on the
modem to the LAN 2 connection on the ProxyServer.
Internet
Cable/DSL
Modem
LAN 2
Public
MTPSR1-120 Firewall
IP Address 192.168.0.101
Mask 255.255.255.0
LAN 1
Private
HUB
Private LAN
NovellTM Server
Workstation
IP Address
IP Address
192.168.0.107
192.168.0.102
Windows NTTM Server
IP Address
192.168.0.103
Workstation
IP Address
192.168.0.106
Workstation
IP Address
192.168.0.105
Mail Server
IP Address
192.168.0.104
Figure 4-1. Cable/DSL Modem Configuration
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 - Firewall Software
During the loading of the Firewall software, the Secured LAN Port Parameters group (in the IP
Setup dialog box) was configured to include an unregistered IP Address of 192.168.0.101 and
default Net Mask of 255.255.255.0 for the private LAN (LAN 1). The Internet LAN Port
Parameters group was configured with the DHCP Client option active. This enables the Internet
Services Provider (ISP) to dynamically provide the registered Internet IP addresses. If a static IP
addressing scheme is provided by the ISP, then the DHCP Client field in the Internet LAN Port
Parameters group is deactivated and the IP Address field becomes active. The static IP address
is then entered in this field.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Configuration 2 - Existing Dual-LAN with Router
Another typical configuration ties the private LAN (LAN 1) to an existing Internet Services
Network, which already provides Internet services. This configuration provides firewall and
gateway security for the LAN users, and supports Internet access restrictions based on IP
address, client protocols, or a list of forbidden sites.
Internet
MTPSR1-120 Firewall
IP Address 192.168.0.101
Mask 255.255.255.0
Internet LAN
IP Address 204.26.12.9
Mask 255.255.255.0
Router
IP address
204.26.12.10
LAN 2
Public
LAN 1
Private
HUB
HUB
NovellTM Server
IP Address
192.168.0.102
Workstation
IP Address
192.168.0.107
Windows NTTM Server
IP Address
192.168.0.103
Workstation
IP Address
192.168.0.106
Workstation
Mail Server
IP Address
192.168.0.104
IP Address
192.168.0.105
Web Server
IP Address
204.26.12.20
FTP Server
IP Address
204.26.12.30
Video Server
IP Address
Private LAN
204.26.12.40
Internet Services
Network
Figure 4-2. Existing Dual-LAN with Router Configuration
In the configuration shown in Figure 4-2, the ProxyServer is connected to the private LAN via the
LAN 1 connection of the back of the ProxyServer. The Internet Services Network, or public LAN,
is connected to the LAN 2 connector on the back of the unit. Connection to the Internet is then
provided by the existing router connected to the Internet Services Network.
During the loading of the Firewall software, the Secured LAN Port Parameters group (in the IP
Setup dialog box) was configured to include an IP Address of 192.168.0.101, and a default Net
Mask of 255.255.2.55.0 for the private LAN (LAN 1). The Internet LAN Port Parameters group
was configured with the DHCP Client option disabled, and the static IP Address of 204.26.12.10
was entered. This address is the existing static IP address that had already been assigned to the
Internet Services Network router. A Net Mask of 255.255.255.0 was then entered to complete the
configuration of the public LAN (LAN 2).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 - Firewall Software
Configuration 3 - New Dual-LAN with T1 DSU
The final typical configuration adds Internet services to existing LAN users. With this
configuration, the private LAN (LAN 1) is secured by the firewall while the Internet Services
Network is outside the firewall allowing Internet users to access the public LAN (LAN 2)
resources, such as the Web, FTP, etc. servers. The Internet connection is provided with a T1
DSU connected to the RS232 connection on the back of the unit.
Internet
T1 DSU
WAN Port
MTPSR1-120 Firewall
IP Address 192.168.0.101
Mask 255.255.255.0
LAN 1
Private
LAN 2
Public
Internet LAN
IP address
204.26.12.10
HUB
HUB
NovellTM Server
IP Address
192.168.0.102
Workstation
IP Address
192.168.0.107
Windows NTTM Server
IP Address
192.168.0.103
Workstation
IP Address
192.168.0.106
Workstation
Mail Server
IP Address
192.168.0.104
IP Address
Web Server
192.168.0.105
FTP Server
Video Server
IP Address
IP Address
IP Address
204.26.12.20
204.26.12.30
204.26.12.40
Private LAN
Internet Services
Network
Figure 4-3. New Dual-LAN with T1 DSU Configuration
In the configuration shown in Figure 4-3, the ProxyServer is connected to the private LAN via the
LAN 1 connection of the back of the ProxyServer. The Internet Services Network, or public LAN,
is connected to the LAN 2 connector on the back of the unit. Connection to the Internet is then
provided by a T1 DSU connected to the RS232/V.35 connector on the back of the unit.
During the loading of the Firewall software, the Secured LAN Port Parameters group (in the IP
Setup dialog box) was configured to include an unregistered IP Address of 192.168.0.101 and
default Net Mask of 255.255.255.0 for the private LAN (LAN 1).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
The Internet LAN Port Parameters group is either configured with the DHCP Client option
active, enabling the ISP to dynamically provide the registered Internet IP addresses, or with the
DHCP Client option disabled if a static IP addressing scheme is provided by the ISP. If the DHCP
Client field is deactivated the static IP Address of 204.26.12.10 is then entered and the WAN
option is checked in the Internet Gateway Parameters group.
In the Default WAN Link Setup dialog, the WAN Enable option is activated.
In the Dial Number field, the number for the ISP is entered and in the User Name and
Password fields, the user name and password agreed upon with the ISP are entered.
The sections that follow provide examples of how to add some of the advanced features that
enhance and build upon this basic setup.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 - Firewall Software
Firewall Program Group
This section describes the advanced features of your Firewall software. The major configuration
parameters are set when the software is loaded into your PC and the setup configuration is
downloaded to the ProxyServer at the conclusion of the software installation. Our intent is not to
cover every dialog box nor every field within a dialog box. The ProxyServer on-line help provided
with your software provides such definitions, along with explanations of parameters and defaults
where applicable. This constitutes a dynamic help system in that the information presented
always relates to the dialog box or window that is currently open.
Your Firewall Program Group contains several applications which provide the maximum flexibility
for configuration and use. These applications are also accessible in Windows by clicking Start |
Programs | Firewall | (application). The various options include Configuration Port Setup,
Download Default Setup, Download Firmware Update, Firewall Configuration, Uninstall Firewall
Configuration and Wan Device Configuration.
Firewall Configuration will be discussed in detail later in this chapter. A brief description of the
other components is provided here:
Configuration Port Setup
The Configuration Port Setup program allows you to set up and configure the configuration port
on your ProxyServer. This dialog is included in the initial installation process. Although
parameters can be changed, be sure to note the current status of the software before making any
alterations.
When you installed the Firewall software, you selected to configure the port as either an IP or
COM Port. When COM Port is selected, you can assign the proper COM Port and define the
modem Init String, Dial String, and various responses. If IP is selected, you can assign a static IP
address or select one from the drop down list. For more information on each individual
parameter, refer to the on-line help provided with the software.
Download Default Setup
This feature allows you to download the default settings, configured during installation, to the
ProxyServer. If you are installing for the first time, you will download this setup at the end of the
installation before operating the ProxyServer. If you have made changes to the Firewall
Configuration and wish to revert to the default setup, you can do so through the Firewall Program
Group.
Choose Download Default Setup to download the factory default settings. If the ProxyServer is
running, you will be queried to reboot. Click Yes to continue with the download. You will then be
presented with two dialogs including IP Setup and Default WAN Link(s) Setup. These screens
will contain the original setup information. Click OK on each to accept the default settings, or
make any necessary changes and then click OK. When prompted, click OK again to proceed
with the download. The default setup will be written to the Firewall. This process may take a few
minutes. When it is finished, you will be returned to Windows.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Download Firmware Update
This application allows you to update the firmware of the ProxyServer. This may be necessary in
the case of repair or upgrade. To download the firmware update, choose Download Firmware
Update from the Firewall Program Group, and the Open dialog box is displayed (if the
ProxyServer is running, you will be queried to reboot to update firmware; click OK to proceed and
the Open dialog will be displayed).
By default, the Firewall software will display the proper firmware from the Firewall folder. Double
click on this file in the File Name list.
The Downloading Code dialog is displayed, which includes a status bar to monitor the download.
When the download is complete the ProxyServer will reboot. This process will take several
minutes. After rebooting, you will be returned to Windows.
Uninstall Firewall Configuration
Selecting Uninstall Firewall Configuration will allow you to completely remove all the components
of the Firewall Program Group. Upon selecting this option your will be queried for confirmation.
Click Yes to continue with the uninstall, or click No to abort.
Note: You will not be able to use the ProxyServer without Firewall Configuration. If you remove
the components, you will need to reinstall the software. Refer to your ProxyServer Firewall Quick
Start Guide for installation instructions.
WAN Device Configuration
If you have an external WAN device connected to the WAN port of the ProxyServer, this
application will open the Firewall Print Console, a terminal emulation program, that will allow
configuration of the external device.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 - Firewall Software
Firewall Configuration
To view or change your ProxyServer configuration in Windows 95, click on the Start | Programs
| Firewall | Firewall Configuration. After loading, the Firewall Setup menu will appear.
The Firewall Setup menu consists of 13 buttons which allow you to display and change the
protocol stacks, define the output of the ProxyServer, perform network management functions,
test the communications link, print messages received from the target ProxyServer, and
download setup information to the ProxyServer.
In the bottom row, there are two buttons to open the on-line Help system (Firewall Setup Help)
and end (Exit) a Proxy configuration session.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Changing IP Parameters
The IP Setup dialog box establishes the IP addressing for your private LAN, Public LAN, and, if
the Proxy Server is directly connected to the Internet, the WAN port. To change the IP Setup
parameters that were configured during the initial setup, click on the IP button in the Firewall
Setup menu. The IP Setup dialog is displayed.
The Secured LAN Port Parameters group is used to assign the Ethernet parameters of your
private LAN (LAN 1) port. If a router is used to connect a second private LAN, the IP address of
that router is also entered in this group.
IP Address - This field defines the IP address of the private LAN (LAN 1) port on the
ProxyServer. This must be a unique host IP address that falls in the LAN IP network, and can
be an unregistered address.
Net Mask - This field defines the Subnetwork Mask of the private LAN (LAN 1) port on the
ProxyServer.
Default Route - This field defines the IP address of a router on the private LAN that connects
a second private LAN to the ProxyServer.
The Internet LAN Port Parameters group is used to configure the public LAN (LAN 2) port. The
parameters of this group will vary, depending on the LAN configuration. The Internet LAN Port
Parameters group defines the static or dynamic addressing scheme for the public LAN (LAN 2)
DHCP Client - If this option is active, the Internet Services Provider (ISP) is able to
dynamically provide the registered Internet IP addresses. If a static IP addressing scheme is
provided by the ISP, then the DHCP Client option must be deactivated and the IP Address
field becomes active. The static IP address is then entered in this field.
IP Address - If the DHCP Client option is active, this address is dynamically
assigned by the ISP. If the DHCP Client is inactive, then the static IP address of the
router connected to the Internet Services Network is entered in this field.
Net Mask - If the DHCP Client option is active, the Net Mask is dynamically assigned
by the ISP. If the DHCP Client is inactive, then the Net Mask of the router connected
to the Internet Services Network is entered in this field.
DHCP Relay Agent - Enabling this option allows the ProxyServer to relay IP address
requests from the Internet to the DHCP server through the WAN. If this option is enabled, the
DHCP Server Address field becomes active, and the IP address of the DHCP server must be
entered.
DHCP Server Address - If the DHCP Relay Agent option is active, enter the IP
address of the DHCP server in this field.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 - Firewall Software
The WAN Port Parameters group is used to configure the WAN port, if enabled. The WAN port
parameters are established when the ProxyServer is directly connected to the Internet via the
RS232/V.35 connector on the back of the unit.
ISP Assigns Dynamic Address - Normally, the ISP assigns a dynamic address when the
port comes up. If this is not the case, disable this option and assign a valid registered Internet
address in the IP Address field.
IP Address - If dynamic addressing is enabled, this field is dynamically assigned by
the ISP. If static addressing is enabled, enter a valid Internet address in this field.
Net Mask - Enter the Subnetwork Mask for the WAN port in this field.
The Internet Gateway Parameters group is used to configure the Internet gateway if used by
the Internet LAN (LAN 2) port.
WAN - If a connection to the Internet Services Network is provided via a DCE device
connected to the RS232/V.35 port on the back of the ProxyServer, then this option must be
selected.
Internet LAN - If a connection to the Internet Services Network is provided through the
Internet LAN (LAN 2), then this option must be selected. If the Internet LAN is configured as
a DHCP Client, then the IP address will be dynamically assigned by the ISP. If the DHCP
Client option is disabled, then a valid registered Internet address must be entered in the IP
Address field.
IP Address - If the Internet LAN is configured as a DHCP Client, this address will be
dynamically assigned by the ISP. If the DHCP Client option is disabled, the a valid
registered Internet address must be entered in the IP Address field.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Changing WAN Port Parameters
In order to change the WAN port parameters of a DCE device connected to the RS232/V.35
connector on the ProxyServer, click on the WAN button in the Firewall Setup menu. The WAN
Port Setup dialog box is displayed.
From this dialog, you can configure the parameters of the WAN port. To enable the WAN port,
click on the Port Enable check box.
The Mode group allows you to configure the WAN interface to match the DCE device connected
to the RS232/V.35 port on the ProxyServer. Options include Asynchronous or Synchronous
mode. If asynchronous is chosen, you can select the proper Baud speed. If synchronous is
chosen, External Clocking or Internal Clocking must be selected.
The Connection Method group allows you to configure the port as Direct Connect/Leased
Line, Answering or Dialing, and allows you to select the Modem Type and Dial Number for the
DCE device.
For a detailed description of each field, refer to the on-line help provided with your Firewall
software.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 - Firewall Software
Adding Proxy Applications
Certain software on your LAN may require a TCP or UDP port usage that is not currently
supported by the ProxyServer. If this is the case, you must refer to the software documentation to
determine the proper port usage and number. Without this information, the Proxy will not allow
packets through to the Internet from the unknown software. Once the necessary information has
been determined, you can add the application(s) to the supported list.
This list includes many of the most common port usages, however, not all are included because
an increase in the number of port usages supported means a possible decrease in performance
speed, and an increased security risk.
If you wish to add ProxyServer applications that are not currently supported, click on the Proxy
Server button in the Firewall Setup menu. The Proxy Applications Configuration dialog box
appears. This menu includes a list of all the applications currently supported by the ProxyServer.
Click on the Add button. The Add/Edit Entry dialog box appears.
This dialog will allow you choose the desired protocol, and enter a Port Name/Number and
Description. After you have entered these items, click on OK to add the port usage to the list of
supported usages.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Enabling the DHCP Server
The DHCP Server feature of the ProxyServer manages all the IP address assignments on the
private LAN. IP address management becomes completely transparent.
To enable the DHCP Server ability in the ProxyServer, click on the DHCP Server button in the
Firewall Setup menu. The DHCP Server Setup dialog box appears.
The DHCP Server Setup menu allows you to customize each client PC configuration from one
central point. You can establish a range of client addresses in the Manage Addresses group.
You can then exclude specific addresses from that range in the Exclude Range field. You can
also add, delete, edit and bind addresses using the corresponding buttons in this group.
The Option Types and Values group on the bottom portion of the menu allows you to customize
the configuration of the client platform. Again, you can add, delete and edit an option by
highlighting it and clicking on the appropriate button. You cannot, however, edit or delete entries
provided in the default list.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 - Remote Configuration and Management
Enabling PPP/SLIP
If you wish to use Point to Point Protocol (PPP) or Serial Line IP Protocol (SLIP) on the WAN
port, you can enable in the PPP/SLIP menu. In order to configure these options, you must first
enable the WAN port.
To enable the WAN port, click on the WAN button in the Firewall Setup menu. The WAN Setup
dialog box appears.
Click on the Port Enable check box enable the WAN port. Click OK.
You are returned to the Firewall Setup menu. Click on PPP/SLIP. The PPP Port Setup menu is
displayed.
Enabling PPP
If you wish to configure the port for use with PPP, click on the Enable check box in the PPP
group. Enter a valid User Name and Password and verify (or change) the Periodic Timer and
Number of Retries (for definition and parameters of a specific field, refer to the on-line help).
By default, Dial On Demand is enabled. If you do not wish to use this feature, click on the Enable
check box in the Dial On Demand group to disable it.
When you have finished the configuration, click OK. You are returned to the Firewall Setup
menu. Click Download Setup to save the new configuration to the ProxyServer.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Enabling SLIP
If you wish to configure the port for use with SLIP, click on the Enable check box in the SLIP
group.
The following message appears:
Click OK. This value was assigned in the initial software installation and was downloaded to the
ProxyServer at the end of the installation. If you wish to verify or change the WAN IP address,
click on IP in the Firewall Setup menu.
If you wish to make use of CSLIP (Van Jacobsen Compression), click on the CSLIP (Van
Jacobsen Compression check box to enable CSLIP. Verify (or change) the Maximum Transmit
Unit value (for definition and parameters of a specific field, refer to the on-line help).
By default, Dial On Demand is enabled. If you do not wish to use this feature, click on the Enable
check box in the Dial On Demand group to disable it.
When you have finished the configuration, click OK. You are returned to the Firewall Setup
menu. Click Download Setup to save the new configuration to the ProxyServer.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 - Firewall Software
Applications
In addition to local configuration, the ProxyServer supports various applications which allow it to
be configured remotely from anywhere on the connected Internet. To manage these applications,
click Others in the Proxy Setup menu.
The Applications Setup dialog box appears.
Enter a valid Server Password and Server IP Address (the IP address of the ProxyServer) and
then verify that the desired applications are enabled. By default, the ProxyServer supports Telnet,
TFTP, WEB, and Dumb Terminal management. If you wish to disable any of these applications,
click the corresponding check box to disable support.
For more information on using these remote configuration applications, please refer to Chapter 5.
Statistics
The ProxyServer is capable of providing statistics for each port and for the whole system. These
statistics can be useful for troubleshooting and management purposes. To access this
information, click Statistics in the Proxy Setup menu. The Statistics dialog box is displayed.
From this menu, you can query the details of a specific port or observe total system statistics
such as Total System Up Time, and Total Calls. In addition, statistics can be saved to a log file for
future use.
For more details and parameters about specific fields within the statistics dialog, refer to the on-
line help.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Filtering
The IP Filtering Setup dialog provides tabs that let you configure the ProxyServer so that IP
packets that are received by the server can be selectively filtered or forwarded based on their
addresses or by the protocol ports to which they are destined.
The three filtering methods are:
•
IP Protocol Port Based Filtering - In this method, IP packets can be filtered based on their
specific purposes; e.g. Telnet packets (TCP based) or TFTP (UDP based) can be filtered or
forwarded.
•
•
IP Address Based Filtering - In this method, filtering is based on the source and destination
IP addresses in the packet.
ICMP Filtering - Separate filtering support is provided for specific kinds of received ICMP
packets.
For a more detailed description of filtering, refer to the on-line help provided with your Firewall
software.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 - Remote Configuration and Management
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Introduction
This chapter provides procedures for changing the configuration of a remote unit. Remote
configuration allows a PC at one site (local site) to dial a remote ProxyServer and change the
configuration of that remote unit. Remote configuration can be accomplished either directly
through the LAN or remotely using modems. To remotely configure a ProxyServer, a local PC
needs to be connected to a dial-up line and the ProxyServer software configured to call the
remote ProxyServer. The remote ProxyServer needs to have a modem connected to a dial-up
line and the Command Port. Once the connection to the remote unit is made, you can change the
configuration as you see fit. Once the configuration is changed, you can down load the new
configuration to the remote ProxyServer. Refer to the Modem-Based Remote Configuration
Procedure to remotely configure a ProxyServer.
To configure the remote ProxyServer through the LAN, change the communication type to the IP
based Trivial File Transfer Protocol (known as TFTP) and change the configuration as you see fit.
Refer to the LAN-Based Remote Configuration Procedure in this chapter to configure a remote
ProxyServer.
Modem-Based Remote Configuration Procedure
1
At the remote site, remove the serial cable from the PC to the Command Port connector
on the back panel of the ProxyServer.
2
At the remote site, connect a special cable (Remote Configuration Cable) to the
Command Port connector on the back panel of the ProxyServer and the RS232
connector on the modem. The special cable is a serial cable with male connectors on
both ends.
Connect the modem to your local telephone line.
Provide your telephone number to the person verifying your configuration.
3
4
At the main site, connect your local PC to a modem that is connected to a dial-up line.
Install the ProxyServer software on the local PC. When installed, click Start | Programs
| Firewall | Configuration Port Setup, or double click on the Configuration Port icon in
the Firewall program group.
5
The Firewall Setup dialog box is displayed.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 - Remote Configuration and Management
Verify that the Communication Type is set for COM Port and the Select Port field is set
for the COM port of your local PC.
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number
of the remote ProxyServer.
If your Modem Initialization String, Initialization Response, or Connect Response values
are different than the defaults in the dialog box, refer to your modem user documentation
and change the default values to match your modem.
Click OK when you are satisfied with your selections.
6
7
Run the Proxy Server Configuration program. Click Start | Programs | Firewall |
Firewall Configuration, or double click on the Firewall Configuration icon in the
Firewall program group.
The Dialing Router dialog box is displayed while software is dialing the remote
ProxyServer.
8
9
The Reading Setup dialog box is displayed.
The Firewall Setup menu is displayed. This is the dialog box of the remote ProxyServer.
Refer to the on-line help provided with your software for a description of each dialog box
and field within a dialog box.
10
After you have changed the configuration of the remote ProxyServer, click Download
Setup to update the configuration. The remote ProxyServer will be brought down, the
new configuration written to the unit, and the unit will reboot.
11
12
Click Exit when the downloading is complete.
The Hangup connection with Router? dialog box is displayed
Click Yes to disconnect the phone connection to the remote site.
13
14
If the same telephone number is not going to be used again in the immediate future, you
may want to remove it from the Port Setup dialog box.
At the remote site, reconnect the ProxyServer to the serial port of the PC and from the
Firewall program group double click on the Firewall Configuration icon to verify that the
ProxyServer is running.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
LAN-Based Remote Configuration Procedure
Windows Sockets Compliant TCP/IP Stack
The configuration program requires a Windows Sockets compliant TCP/IP stack. TCP/IP protocol
software must be installed and functional before the configuration program can be used.
1
You must assign an Internet (IP) address for the PC and for each node that will be
managed by the configuration program. Refer to the protocol software documentation for
instructions on how to set the IP addresses.
Once you have completed this step, you should be able to use the protocol Ping
command for the PC host name. You should also test the network interface configuration
by Pinging another TCP/IP device that is connected to the network.
2
3
Install the Proxy Server software on the local PC. When installed click Start | Programs
| Firewall | Configuration Port Setup, or double click on the Configuration Port Setup
icon in the Firewall program group.
The Firewall Setup dialog box is displayed.
Verify that the Communication Type field is set IP.
In the Router IP Address field, enter the IP Address of the remote ProxyServer.
Click OK when you are satisfied with your selections.
4
5
Run the Proxy Server Configuration program. Click Start | Programs | Firewall |
Firewall Configuration, or double click on the Firewall Configuration icon in the
Firewall program group.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 - Remote Configuration and Management
6
The Firewall Setup dialog box is displayed. This is the dialog box of the remote
ProxyServer. Refer to the on-line help provided with your ProxyServer for the definition of
each dialog box and field within a dialog box.
7
After you have changed the configuration of the remote ProxyServer, click Download
Setup to update the configuration. The remote ProxyServer will be brought down, the
new configuration written to the unit, and the unit will reboot.
8
9
Click Exit when the downloading is complete.
Double click on the Firewall Configuration icon in the Firewall program group to verify
that the ProxyServer is running.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Remote Management
This section describes typical client applications that can be used to configure the ProxyServer
remotely. It is important to note that although any subsequent changes to configuration can be
made using these applications, the initial setup and configuration of the ProxyServer must be
done on the local PC, using the ProxyServer software provided with your unit.
Although establishing access to the ProxyServer varies between applications, the configuration
functions mirror those of the ProxyServer software. For more information on ProxyServer
software, refer to Chapter 4 - Proxy Server Software.
Telnet
A typical Telnet client application is described in this chapter. The Firewall ProxyServer has a
built-in Telnet Server that enables Telnet client PCs to access the ProxyServer. A typical Telnet
client is allowed to configure the ProxyServer and WAN devices. A typical TCP/IP program group
is shown below with a Tcpman icon and a Telnet icon.
The TCP/IP stack has to be loaded before the Telnet client (a Windows application) will run, and
the Telnet Server option has to be selected from the Applications Setup dialog box using Firewall
Configuration (see Chapter 4 - Applications). Double click on the Telnet icon (or shortcut) and a
blank Telnet screen is displayed. Click Connect | Remote System and the Connect dialog box is
displayed. Select (or enter) a Host Name (the IP address of the ProxyServer). In this example,
the Host Name is 192.168.2.4.
When you enter a valid Host Name (IP address) and click on Connect, you are immediately
connected to the target ProxyServer and the Firewall Management Menu screen is displayed.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 - Remote Configuration and Management
Firewall Management Menu
The Firewall Management Menu provides two basic options: Firewall Configuration and WAN
Device Configuration. A further option enables you to close the Telnet session from this menu by
pressing the Esc key.
Firewall Configuration
Selecting Option 1 displays the Firewall Configuration menu with options that enable you to
configure ProxyServer parameters and download settings. In addition, you can obtain statistics
and system information, or reset the ProxyServer.
For more details on Firewall configuration, refer to Chapter 4 - Firewall Software, and the on-line
helps.
WAN Device Configuration
Selecting Option 2 displays the WAN Device Configuration options, which enable you to gain
direct access to the DCE device on the WAN port.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
WEB Management
The ProxyServer can be accessed, via a standard web-browser, from anywhere on the
connected Internet. In order to provide this support, the WEB Server option has to be enabled in
the Applications Setup dialog box (see Chapter 4 - Firewall Software, Applications).
Once enabled, users can access the ProxyServer by entering its IP address in the destination
field of their web browser. The following screen appears.
Click on the word ‘login’ to log in to the ProxyServer configuration program. The Enter Network
Password screen is displayed.
Type supervisor in the User Name field (no password needed) and click OK. The Firewall
Configuration screen is displayed.
From this screen you can access all the configuration options. Refer to Chapter 4 - Firewall
Software, for a description of the various options.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 - Warranty, Service and Tech Support
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Introduction
This chapter starts out with statements about your Dual Ethernet ProxyServer 2-year warranty.
The next section, Tech Support, should be read carefully if you have questions or problems with
your ProxyServer. It includes the technical support telephone numbers, space for recording your
product information, and an explanation of how to send in your ProxyServer should you require
service. The final three sections explain how to use our bulletin board service (BBS), and get
support through CompuServe and the Internet.
Limited Warranty
Multi-Tech Systems, Inc. (“MTS”) warrants that its products will be free from defects in material or
workmanship for a period of two years from the date of purchase, or if proof of purchase is not
provided, two years from date of shipment. MTS MAKES NO OTHER WARRANTY,
EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. This warranty does not
apply to any products which have been damaged by lightning storms, water, or power surges or
which have been neglected, altered, abused, used for a purpose other than the one for which
they were manufactured, repaired by the customer or any party without MTS’s written
authorization, or used in any manner inconsistent with MTS’s instructions.
MTS’s entire obligation under this warranty shall be limited (at MTS’s option) to repair or
replacement of any products which prove to be defective within the warranty period, or, at MTS’s
option, issuance of a refund of the purchase price. Defective products must be returned by
Customer to MTS’s factory transportation prepaid.
MTS WILL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES AND UNDER NO
CIRCUMSTANCES WILL ITS LIABILITY EXCEED THE PURCHASE PRICE FOR DEFECTIVE
PRODUCTS.
On-line Warranty Registration
To register your ProxyServer on-line, click on the following link:
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 - Warranty, Service and Technical Support
Tech Support
Multi-Tech has an excellent staff of technical support personnel available to help you get the most
out of your Multi-Tech product. If you have any questions about the operation of this unit, call 1-
800-972-2439. Please fill out the ProxyServer information (below), and have it available when
you call. If your ProxyServer requires service, the tech support specialist will guide you on how to
send in your ProxyServer (refer to the next section).
Recording ProxyServer Information
Please fill in the following information on your Multi-Tech ProxyServer. This will help tech support
in answering your questions. (The same information is requested on the Warranty Registration
Card.)
Model No.: _________________________
Serial No.: _________________________
Software Version: ____________________
The model and serial numbers are on the bottom of your ProxyServer.
Please note the type of external link device that is connected to your ProxyServer before calling
tech support. Also, note the status of your ProxyServer including LED indicators, screen
messages, diagnostic test results, DIP-Switch settings, problems with a specific application, etc.
Use the space below to note the ProxyServer status:
________________________________________________________________________________________________________
________________________________________________________________________________________________________
________________________________________________________________________________________________________
________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Service
If your tech support specialist decides that service is required, your ProxyServer may be sent
(freight prepaid) to our factory. Return shipping charges will be paid by Multi-Tech Systems.
Include the following with your ProxyServer:
•
•
•
•
a description of the problem.
return billing and return shipping addresses.
contact name and phone number.
check or purchase order number for payment if the ProxyServer is out of warranty. (Check
with your technical support specialist for the standard repair charge for your ProxyServer).
•
if possible, note the name of the technical support specialist with whom you spoke.
If you need to inquire about the status of the returned product, be prepared to provide the serial
number of the product sent.
Send your ProxyServer to this address:
MULTI-TECH SYSTEMS, INC.
2205 WOODALE DRIVE
MOUNDS VIEW, MINNESOTA 55112
ATTN: SERVICE OR REPAIRS
You should also check with the supplier of your ProxyServer on the availability of local service
and/or loaner units in your part of the country.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 - Warranty, Service and Technical Support
The Multi-Tech BBS
For customers who do not have Internet access, Multi-Tech maintains a bulletin board system
(BBS). Information available from the BBS includes new product information, product upgrade
files, and problem-solving tips. The phone number for the Multi-Tech BBS is (800) 392-2432
(USA and Canada) or (612) 785-3702 (international and local).
The BBS can be accessed by any asynchronous modem operating at 1200 bps to 56K bps at a
setting of 8 bits, no parity, and 1 stop bit (8-N-1).
To Log on to the Multi-Tech BBS
1.
2.
Set your communications program to 8-N-1.
Dial our BBS at (800) 392-2432 (USA and Canada) or (612) 785-3702 (international and
local).
3.
At the prompts, type your first name, last name, and password; then press ENTER. If
you are a first time caller, the BBS asks if your name is spelled correctly. If you answer
yes, a questionnaire appears. You must complete the questionnaire to use the BBS on
your first call.
4.
Press ENTER until the Main Menu appears. From the Main Menu you have access to
two areas: the Files Menu and News. For help on menu commands, type ?.
To Download a File
If you know the file name
1.
2.
3.
4.
5.
From the Main Menu, type F to access the Files Menu, then type D.
Enter the name of the file you wish to download from the BBS.
If a password is required, enter the password.
Answer Y or N to the automatic logoff question.
Select a file transfer protocol by typing the indicated letter, such as Z for Zmodem (the
recommended protocol).
6.
If you select Zmodem, the transfer will begin automatically. If you select another protocol,
you may have to initiate the transfer yourself. (In most data communications programs,
the PAGE DOWN key initiates the download.)
7.
8.
When the download is complete, press ENTER to return to the File Menu.
To exit the BBS, type G and press ENTER.
If you don’t know the file name
1.
From the Main Menu, type F to access the Files Menu. For a list of file areas, type L,
press ENTER, then type L and press ENTER again. (If you do not type the second L,
you will list all of the files on the BBS.)
2.
3.
4.
Mark each file area you would like to examine by typing its list number and pressing
ENTER.
Enter L to list all the files in the selected file areas. Enter C to go forward in the file list
and P to go back.
To mark one or more files for download, type M, press ENTER, type the list numbers of
the files, and press ENTER again.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
5.
6.
7.
Enter D. You will see a list of the files you have marked. Enter E if you would like to edit
the list; otherwise enter D again to start the download process.
Select a file transfer protocol by typing the indicated letter, such as Z for Zmodem (the
recommended protocol).
If you select Zmodem, the file will transfer automatically. If you select another protocol,
you may have to initiate the transfer yourself. (In most data communications programs,
the PAGE DOWN key initiates the download.)
8.
9.
When the download is complete, press ENTER to return to the File Menu.
To exit the BBS, type G and press ENTER.
About CompuServe
In addition to the BBS, Multi-Tech provides support through CompuServe’s Modem Vendor
Forum (GO MODEMVEN). Refer to your CompuServe documentation for special operating
procedures.
About the Internet
Multi-Tech is a commercial user on the Internet, and we retrieve messages from our customers
on a periodic basis. If you prefer to receive technical support via the Internet, you can contact
Tech Support at the following address:
Multi-Tech’s presence includes a Web site at:
and an ftp site at:
About the Multi-Tech Fax-Back Service
Multi-Tech’s fax-back system provides 24-hour access to sales, marketing, and technical
literature. Dial 612-717-5888, follow the voice prompts, and request document number 10 for a
catalog of available documents. For convenience, have your fax number handy:
_________________________. From the catalog of available documents, you can order
newsletters, white papers, press releases, etc. from the sales and marketing index (pages 1-4),
or order basic modem operation and troubleshooting guides from the technical support and
engineering index. Just enter the applicable FB Doc. # from the left column of the catalog.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendixes
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Appendix A - TCP/IP (Transmission Control Protocol/
Internet Protocol) Description
TCP/IP is a protocol suite and related applications developed for the U.S. Department of Defense
in the 1970s and 1980s specifically to permit different types of computers to communicate and
exchange information with one another. TCP/IP is currently mandated as an official U.S.
Department of Defense protocol and is also widely used in the UNIX community.
Before you install TCP/IP on your network, you need to establish your Internet addressing
strategy. First, choose a domain name for your company. A domain name is the unique Internet
name, usually the name of your business, that identifies your company. For example, Multi-Tech’s
domain name is multitech.com ( .com indicates this is a commercial organization; .edu denotes
educational organizations, .gov denotes government organizations). Next, determine how many
IP addresses you’ll need. This depends on how many individual network segments you have, and
how many systems on each segment need to be connected to the Internet. You’ll need an IP
address for each network interface on each computer and hardware device.
IP addresses are 32 bits long and come in two types: network and host. Network addresses
come in five classes: A, B, C, D, and E. Each class of network address is allocated a certain
number of host addresses. For example, a class B network can have a maximum of 65,534
hosts, while a class C network can have only 254. The class A and B addresses have been
exhausted, and the class D and E addresses are reserved for special use. Consequently,
companies now seeking an Internet connection are limited to class C addresses.
Early IP implementations ran on hosts commonly interconnected by Ethernet local area networks
(LAN). Every transmission on the LAN contains the local network, or medium access control
(MAC), address of the source and destination nodes. The MAC address is 48-bits in length and is
non-hierarchical; MAC addresses are never the same as IP addresses.
When a host needs to send a datagram to another host on the same network, the sending
application must know both the IP and MAC addresses of the intended receiver. Unfortunately,
the IP process may not know the MAC address of the receiver. The Address Resolution Protocol
(ARP), described in RFC 826 (http://info.internet.isi.edu:80/in-notes/rfc/files/rfc826.txt) provides a
mechanism for a host to determine a receiver’s MAC address from the IP address. In the
process, the host sends an ARP packet in a frame containing the MAC broadcast address; and
then the ARP request advertises the destination IP address and asks for the associated MAC
address. The station on the LAN that recognizes its own IP address will send an ARP response
with its own MAC address. An ARP message is carried directly in an IP datagram.
Other address resolution procedures have also been defined, including those which allow a
diskless processor to determine its IP address from its MAC address (Reverse ARP, or RARP),
provides a mapping between an IP address and a frame relay virtual circuit identifier (Inverse
ARP, or InARP), and provides a mapping between an IP address and ATM virtual path/channel
identifiers (ATMARP).
The TCP/IP protocol suite comprises two protocols that correspond roughly to the OSI Transport
and Session Layers; these protocols are called the Transmission Control Protocol and the User
Datagram Protocol (UDP). Individual applications are referred to by a port identifier in TCP/UDP
messages. The port identifier and IP address together form a “socket”. Well-known port numbers
on the server side of a connection include 20 (FTP data transfer), 21 (FTP control), 23 (Telnet),
25 (SMTP), 43 (whois), 70 (Gopher), 79 (finger), and 80 (HTTP).
TCP, described in RFC 793 (http://info.internet.isi.edu:80/in-notes/rfc/files/rfc793.txt) provides a
virtual circuit (connection-oriented) communication service across the network. TCP includes
rules for formatting messages, establishing and terminating virtual circuits, sequencing, flow
control, and error correction. Most of the applications in the TCP/IP suite operate over the
“reliable” transport service provided by TCP.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A - TCP/IP Description
UDP, described in RFC 768 (http://info.internet.isi.edu:80/in-notes/rfc/files/rfc768.txt) provides an
end-to-end datagram (connectionless) service. Some applications, such as those that involve a
simple query and response, are better suited to the datagram service of UDP because there is no
time lost to virtual circuit establishment and termination. UDP’s primary function is to add a port
number to the IP address to provide a socket for the application.
The Application Layer protocols are examples of common TCP/IP applications and utilities, which
include:
•
Telnet (Telecommunication Network): a virtual terminal protocol allowing a user logged on to
one TCP/IP host to access other hosts on the network, described in RFC 854 (http://
•
•
•
FTP: the File Transfer Protocol allows a user to transfer files between local and remote host
Archie: a utility that allows a user to search all registered anonymous FTP sites for files on a
specified topic.
Gopher: a tool that allows users to search through data repositories using a menu-driven,
hierarchical interface, with links to other sites, per RFC 1436 (http://info.internet.isi.edu:80/in-
•
•
SMTP: the Simple Mail Transfer Protocol is the standard protocol for the exchange of
electronic mail over the Internet, per RFC 821 (http://info.internet.isi.edu:80/in-notes/rfc/files/
HTTP: the Hypertext Transfer Protocol is the basis for exchange of information over the
World Wide Web (WWW). Various versions of HTTP are in use over the Internet, with HTTP
the most current.
•
HTML: WWW pages are written in the Hypertext Markup Language (HTML), an ASCII-based,
platform-independent formatting language, per RFC 1866 (http://info.internet.isi.edu:80/in-
•
•
Finger: used to determine the status of other hosts and/or users, per RFC 1288 (http://
POP: the Post Office Protocol defines a simple interface between a user’s mail reader
software and an electronic mail server; the current version is POP3, described in RFC 1460
•
•
DNS: the Domain Name System defines the structure of Internet names and their association
with IP addresses, as well as the association of mail, name, and other servers with domains.
SNMP: the Simple Network Management Protocol defines procedures and management
information databases for managing TCP/IP-based network devices. SNMP, defined by RFC
1157 (http://info.internet.isi.edu:80/in-notes/rfc/files/rfc1157.txt) is widely deployed in local and
wide area network. SNMP Version 2 (SNMPv2), per RFC 1441 (http://info.internet.isi.edu:80/
more complex.
•
•
Ping: a utility that allows a user at one system to determine the status of other hosts and the
latency in getting a message to that host. Ping uses ICMP Echo messages.
Whois/NICNAME: Utilities that search databases for information about Internet domain and
domain contact information, per RFC 954 (http://info.internet.isi.edu:80/in-notes/rfc/files/
•
Traceroute: a tool that displays the route that packets will take when traveling to a remote
host.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
Internet Protocol (IP)
IP is the Internet standard protocol that tracks Internetwork node addresses, routes outgoing
messages and recognizes incoming messages, allowing a message to cross multiple networks
on the way to its final destination. The IPv6 Control Protocol (IPV6CP) is responsible for
configuring, enabling, and disabling the IPv6 protocol modules on both ends of the point-to-point
link. IPV6CP uses the same packet exchange mechanism as the Link Control Protocol (LCP).
IPV6CP packets are not exchanged until PPP has reached the Network-Layer Protocol phase.
IPV6CP packets received before this phase is reached are silently discarded. (See also TCP/IP.)
Before you install TCP/IP on your network, you need to establish your Internet addressing
strategy. You first choose a domain name for your company. A domain name is the unique
Internet name, usually the name of your business, that identifies your company. For example,
Multi-Tech’s domain name is multitech.com (where .com indicates this is a commercial
organization; .edu denotes educational organizations, .gov denotes government organizations).
Next, you determine how many IP addresses you’ll need. This depends on how many individual
network segments you have, and how many systems on each segment need to be connected to
the Internet. You need an IP address for each network interface on each computer and hardware
device.
IP addresses are 32 bits long and come in two types: network and host. Network addresses
come in five classes: A, B, C, D, and E. Each class of network address is allocated a certain
number of host addresses. For example, a class B network can have a maximum of 65,534
hosts, while a class C network can have only 254. The class A and B addresses have been
exhausted, and the class D and E addresses are reserved for special use. Consequently,
companies now seeking an Internet connection are limited to class C addresses. The current
demand for Internet connections will exhaust the current stock of 32-bit IP addresses. In
response, Internet architects have proposed the next generation of IP addresses, Ipng (IP Next
Generation). It will feature 16-byte addressing, surpassing the capacities of 32-bit IP. Still in its
design phase, IPng is not expected to be widely deployed before late 1997.
An IP address can serve only a single physical network. Therefore, if your organization has
multiple physical networks, you must make them appear as one to external users. This is done
via “subnetting”, a complex procedure best left to ISPs and others experienced in IP addressing.
Since IP addresses and domain names have no inherent connection, they are mapped together
in databases stored on Domain Name Servers (DNS). If you decide to let an Internet Service
Provider (ISP) administer your DNS server, the ISP can assist you with the domain name and IP
address assignment necessary to configure your company’s site-specific system information.
Domain names and IP addresses are granted by the InterNIC. To check the availability of a
specific name or to obtain more information, call the InterNIC at (703)742-4777, or visit the
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
F
Index
Fax-Back Service ...............................................54
Filtering...............................................................40
Finger .................................................................57
Firewall Configuration .........................................31
Firewall Program Group .....................................29
Firewall Software ................................................24
Front Panel ...........................................................8
LEDs .................................................................8
FTP ....................................................................57
A
About CompuServe ............................................54
About the Internet ...............................................54
About the Multi-Tech Fax-Back Service ..............54
Adding Proxy Applications ..................................35
Applications ........................................................39
Archie .................................................................57
G
B
Gopher ...............................................................57
Back Panel ...........................................................9
Connectors .......................................................9
BBS ....................................................................53
H
HTML .................................................................57
HTTP ..................................................................57
C
I
Cabinet Mounting Screw.....................................13
Cabling Your ProxyServer ..................................14
Changing IP Parameters ....................................32
Changing WAN Port Parameters ........................34
Command Connector ...........................................9
CompuServe ......................................................54
Configuration Port Setup ....................................29
Connectors ...........................................................9
10Base-T ..........................................................9
Command .........................................................9
Ethernet 1 and 2 ...............................................9
Power ...............................................................9
RS232/V.35 .......................................................9
Internet ...............................................................54
Internet Gateway Parameters .............................33
Internet LAN Port Parameters ..................... 20, 32
Internet Protocol .......................................... 56, 58
Internet Services Network ....................................6
IP ........................................................................58
IP Parameters ....................................................32
IP Port Configuration ..........................................20
L
LEDs ....................................................................8
ETHERNET 1 and 2..........................................8
Fail ....................................................................8
Power ...............................................................8
WAN Link ..........................................................8
Limited Warranty ................................................50
Loading Your Software ......................................18
D
Data Communications Equipment ........................9
DCE. See Data Communications Equipment
Default WAN Link Configuration .........................21
DHCP Client ................................................ 20, 32
DHCP Relay Agent ...................................... 20, 32
DHCP Server......................................................36
DNS....................................................................57
Download Default Setup .....................................29
Download Firmware Update ...............................30
O
On-line Warranty Registration.............................50
P
Ping ....................................................................57
POP....................................................................57
Power Connector..................................................9
PPP/SLIP ...........................................................37
Program Group...................................................29
Proxy Applications ..............................................35
E
Enabling PPP/SLIP.............................................37
Enabling the DHCP Server .................................36
Ethernet 1 and 2 Connectors ................................9
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Ethernet ProxyServer User Guide
R
V
Remote Configuration .........................................42
LAN-Based Procedure ....................................44
Modem-Based Procedure ...............................42
Remote Management .........................................46
Telnet ..............................................................46
WEB Management ..........................................48
RS232/V.35 Connector .........................................9
V.35 Shunt ..........................................................13
V.35 Shunt Procedure .....................................13
W
WAN Device Configuration .................................30
WAN Port Parameters .......................... 20, 33, 34
Warranty .............................................................50
On-line Warranty Registration .........................50
WEB Management .............................................48
Whois/NICNAME ................................................57
S
Safety Warnings .................................................12
Secured LAN Port Parameters .................... 20, 32
Service ...............................................................52
Shunt Positions ..................................................13
SMTP .................................................................57
SNMP .................................................................57
Software .............................................................24
Applications ....................................................39
Configuration Port Setup .................................29
DHCP Server ..................................................36
Download Default Setup .................................29
Download Firmware Update............................30
Filtering ...........................................................40
Firewall Configuration .....................................31
IP Parameters .................................................32
Loading ...........................................................18
PPP/SLIP........................................................37
Program Group ...............................................29
Proxy Applications...........................................35
Statistics .........................................................39
Uninstall Firewall Configuration .......................30
WAN Device Configuration .............................30
WAN Port Parameters ....................................34
Specifications .....................................................10
Statistics .............................................................39
T
TCP/IP................................................................56
Tech Support ......................................................51
Technical Specifications .....................................10
Telnet........................................................... 46, 57
The Multi-Tech BBS ............................................53
Traceroute ..........................................................57
Transmission Control Protoco ............................56
Typical Applications ............................................24
Configuration 1 - Cable/DSL Modem...............24
Configuration 2 - Existing Dual-LAN with Router26
Configuration 3 - New Dual-LAN with T1 DSU 27
U
Uninstall Firewall Configuration ..........................30
Unpacking Your ProxyServer..............................12
60
Download from Www.Somanuals.com. All Manuals Search And Download.
|