PARTS AND OPERATION MANUAL
PLASTER/MORTAR MIXERS
WM-700S
WM-700P
Revision #7 (06/26/01)
MULTIQUIPINC.
PARTS DEPARTMENT:
18910 WILMINGTON AVE.
800-427-1244
CARSON, CALIFORNIA 90746 FAX: 800-672-7877
310-537-3700
800-421-1244
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:
800-478-1244
FAX:310-537-3927
FAX:310-631-5032
Atlanta • Boise • Dallas • Houston • Newark
Montreal, Canada • Manchester, UK
Rio De Janiero, Brazil • Guadalajara, Mexico
Download from Www.Somanuals.com. All Manuals Search And Download.
HERE'S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL NUMBER
ON-HAND WHEN CALLING
PARTS DEPARTMENT
800-427-1244 or 310-537-3700
FAX: 800-672-7877 or 310-637-3284
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE
800-478-1244 or 310-537-3700
FAX: 310- 537-4259
WARRANTY DEPARTMENT
888-661-4279, or 310-661-4279
FAX: 310- 537-1173
MAIN
800-421-1244 or 310-537-3700
FAX: 310-537-3927
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Here's how To Get Help .......................................... 3
Table Of Contents ................................................... 4
Parts Ordering Procedures ..................................... 5
Rules for Safe Operation & Safety Decals .............. 6
Warranty.................................................................. 7
WHITEMAN—700S&700P
Operations ......................................................... 8-10
Specifications ........................................................ 11
Explanation Of Codes In Remarks Column .......... 12
Suggested Spare Parts ......................................... 13
Drum Head & Paddle Shaft Assembly ............. 14-15
Steel Drum (S) ................................................. 16-17
Polyethylene Drum (P) ..................................... 18-19
Gas Engines, Pulleys & Cab Assembly............ 20-21
Electric Motor & Pulleys ................................... 22-23
Axle & Wheel Group ......................................... 24-25
Terms and Conditions Of Sale — Parts ................ 26
PAGE 4 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS ORDERING PROCEDURES
Dealer account number
Dealer name and address
Shipping address (if different than billing address)
Return fax number
Applicable model number
Quantity, part number and description of each part
Specify preferred method of shipment:
UPS Ground
•
UPS Second Day or Third Day*
•
UPS Next Day*
•
Federal Express Priority One (please provide us with your Federal
Express account number)*
•
Airborne Express*
•
Truck or parcel post
•
*Normally shipped the same day the order is received, if prior to 2PM west coast time.
Earn Extra Discounts when
you order by FAX!
All parts orders which include complete part numbers
and are received by fax qualify for the following extra
discounts:
Number of
line items ordered
Additional Discount
1-9 items
3%
10+ items**
5%
Get special freight allowances
when you order 10 or more
line items via FAX!**
Now! Direct TOLL-FREE access
to our Parts Department!
UPS Ground Service at no charge for freight
PS Third Day Service at one-half of actual freight cost
No other allowances on freight shipped by any other carrier.
Toll-free nationwide:
800-421-1244
**Common nuts, bolts and washers (all items under $1.00 list price)
do not count towards the 10+ line items.
Toll-free FAX:
*DISCOUNTS ARE SUBJECT TO CHANGE*
800/6-PARTS-7 • 800-672-7877
Fax order discount and UPS special programs revised June 1, 1995
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
RULES FOR SAFE OPERATION & SAFETY DECALS
ꢀ
Do not operate or service this equipment
ꢀ
When towing, an adequate safety chain
before reading the operating and maintenance
instructions manual or serious injury may
result.
must be fastened to the frame, refer to page 9.
ꢀ
Keep all inexperienced and unauthorized
people away from the equipment at all times.
ꢀ
Do not operate this equipment unless all
ꢀ
Unauthorized equipment modifications will
guards and safety devices are attached and
in place.
void all warranties.
ꢀ
Check all fasteners periodically for tightness.
ꢀ
Stop the engine when leaving the
Also check towing tongue bolt, lock nut and
wheel lug nuts for wear.
equipment.
ꢀ
Block the unit when leaving or when using
ꢀ
Wear safety glasses at all times when
on a slope
working around machinery.
ꢀ
Maintain this equipment in a safe operating
ꢀ
Stop the engine and disconnect the spark
plug before allowing anybody’s hands in the
mixing drum.
condition at all times.
ꢀ
Caution must be exercised while servicing
this equipment. Rotating and moving parts can
cause injury if contacted.
ꢀ
Never pour or spray water over the engine
or electric motor.
ꢀ
Stop the engine before servicing, adding
ꢀ
Always stand clear of dump handle when
fuel and oil.
mixer is in operation. Any binding of material
between the mixer blades and drum will cause
drum and handle to quickly move in the
discharge position.
The safety instruction decals shown must be on all Whiteman Mixers
CAUTION!
PUTTING HANDS IN MIXING DRUM
SHUT OFF ENGINE BEFORE
Caution Decal is:
P/N EM948423
SAFETY INSTRUCTIONS
1. Read owners manuals before operating.
2. Keep unauthorized and untrained people away from machine during operation.
3. Make sure all safety devices are in place before this machine is started.
4. Make sure engine is turned off and spark plug wire is disconnected before cleaning the
machine.
5. Keep hands and fingers away from moving objects.
6. Do not operate machine in an enclosed area. Proper ventilation is required.
7. Never leave machine unattended when operating.
8. Always stop engine and allow engine to cool before adding fuel or oil.
WHITEMAN CONCRETE PRODUCTS — A MULTIQUIP COMPANY — CARSON, CALIFORNIA
The safety instruction decal is P/N 924801
PAGE 6 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
There are no warranties, express or implied, made by Multiquip
Inc. hereunder on Products manufactured or distributed by it
except the warranty against defects in material and workmanship
on new Products to the original purchaser, as hereinafter set
forth.
There are no warranties, express or implied, in addition to the
above except as may be provided in writing by Multiquip Inc.
MULTIQUIP INC.SHALL NOT BE LIABLE FOR ANY SPECIAL,
INDIRECT OR CONSEQUENTIAL DAMAGES.
THE FOREGOINGWARRANTIES ARE IN PLACE AND IN LIEU
OF ALL WARRANTIES OF MERCHANTABILITY AND
FITNESS AND SETS FORTHTHE ENTIRE OBLIGATION OF
MULTIQUIP INC.
Multiquip Inc. warrants Products manufactured by it to be free
from defects in material and workmanship under normal and
proper use and servicing for the periods specified on the bottom
of this page.Warranty on the engines supplied with the Products
is limited to the warranty extended by the engine manufacturer.
Multiquip Inc.’sole obligation under this warranty is limited to the
replacement or repair, at its Carson, California facility, or such
authorized facility, of only such part or parts thereof as shall
appear to Multiquip Inc. upon inspection at such facility, to have
been defective in material and workmanship.
To avoid misrepresentations with respect to Products sold
hereunder, the Dealer agrees that no warranties, or other
operating guaranties on any Products covered by this Agreement
shall be made in excess of those made by Multiquip Inc.
Multiquip Inc. Warranty Periods:
A statement giving model and serial number of the Product, date
of sale to original purchaser and date and description of failure
shall accompany all parts.
WM-700 ........................ 12 months
Any part or parts determined by Multiquip Inc.to be defective will
be replaced free of charge, F.O.B.Carson, California. Returned
parts subject to warranty must be shipped prepaid to Multiquip
Inc.within 30 days from the date the defective part or parts were
removed.This warranty does not apply to any part or parts which
have been subject to abuse or unauthorized repairs
Warranty with respect to Products, components and accessories
not manufactured by Multiquip Inc. is limited to the warranty
extended by the manufacturer of those items.
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — OPERATIONS
Refer to the following chart. For recommend plug sizes.
115 VOLT 1Ø
WM 700
230 VOLT 1Ø
WM 900
MOTOR
PIGTAIL CAP CONN BODY PIGTAIL CAP CONN BODY
HORSE
POWER
NEMA/
NEMA/
NEMA/
NEMA/
WHITEMAN
WHITEMAN
WHITEMAN
WHITEMAN
1½ & 3 HP L5-30P/940545 L5-30R/940546 L6-15P/940550 L6-15R/940551
CONTROLS
KILL SWITCH: (Gasoline Engine Only) Located on the side of
the engine cover.
GENERAL
ENGINETHROTTLE AND CHOKE CONTROLS: Please refer
to the engine owners manual for specific instructions. The
electric motor switch ( electric motor only) located on the motor
— is used to start and stop the mixer.
The Whiteman WM-700 and WM-900 Series plaster and mortar
mixers are quality mixers that have a batch capacity of 2.5 and
3.5 bags respectively.With proper care, they will give continuous
service year-after-year.
DUMP LATCH: To dump the tub, grasp the dump handle and
lift the dump latch, then rotate the tub to discharge the mix.
After, discharge, return the tub to the vertical mixing position.
BEFORE STARTING
Before starting the engine, read the engine owners manual
and thoroughly understand the safety information.
CLUTCH
Check the items listed below:
The paddle shaft and mixing blades are engaged and
disengaged by tightening and loosening the drive belts with a
spring loaded idler pulley.To engage the clutch, rotate the lever
counterclockwise.The spring maintains the correct belt tension.
To disengage the clutch, rotate the lever clockwise against the
lever stop.The engine base is slotted to adjust for belt wear and
to bring the idler pulley into operating range.
Oil Levels. Be sure to check the oil levels in the engine and
engine reduction unit before starting the unit.
Hardware. Check all hardware on the mixer before starting.
Periodically inspect all hardware. Loose hardware can
contribute to early component failure and poor performance.
Use the torque chart below as a general guideline and keep
all hardware tight:
CAUTION: Stop the engine before allowing anybody to put
their hands in the mixing drum.
HARDWARE DIA
%/16"-18
TORQUE (LB./FT.)
14
24
37
39
90
WHEEL BEARINGS
#/8" -16
After every 3 months of operation, remove the hub dust cap and
inspect the wheel bearings. Once a year, or when required,
disassemble the wheel hubs remove the old grease and repack
the bearings forcing grease between rollers, cone and cage
with a good grade of high speed wheel bearing grease (never
use grease heavier than 265 A.S.T.M. penetration (“No.2.”) Fill
the wheel hub with grease to the inside diameter of the outer
races and also fill the hub grease cap. Reassemble the hub
and mount the wheel. Then tighten the adjusting nut, at the
same time turn the wheel in both directions, until there is a
slight bind to be sure all the bearing surfaces are in contact.
Then back-off the adjusting nut !/6to ¼ turn or to the nearest
locking hole or sufficiently to allow the wheel to rotate freely
within limits of .001" to .010" end play.Lock the nut at this position.
Install the cotter pin and dust cap, and tighten all hardware.
#/8" - 24
½" - 13
½" - 13 (Grade 8)
GASOLINE ENGINE CARE
For care and operation of the gasoline engine, refer to the
engine manufacturer’s operating instructions furnished with
the engine. We recommend draining and refilling the engine
crankcase at least every thirty hours of operation. Check the
engine oil level daily.
ELECTRIC MOTOR CARE
For lubrication care and operation of the electric motor, refer to
your electric motor instruction booklet furnished with the motor.
Protect the electric motor from dust as much as possible and
keep ventilating openings clean. Do not spray water on the
electric motor.
PAGE 8 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — OPERATIONS
BEARING BRACKET
NOTE: It is critical that the length of chain be properly adjusted
to prevent the Draw Bar and front mixer stand from
he ground (contact) in the event the Draw
e.
Grease the bearing bracket every month.
COUNTERSHAFT
STEP 1
The countershaft rotates on two self-aligned pillow block
bearings. Grease these every 40 hours using grade #1 Lithium
Base grease.
DRAW BAR
GEAR ALIGNMENT
The countershaft and driven pinion are mounted on a slotted
base.To align gears, loosen the pillow block mounting bolts and
move them until the necessary alignment has been made.
BOLT & NUT
GEAR LUBRICATION
The surface of the pinion and the bull gear
should be very lightly greased every 250 hours.
2
IMPORTANT! AVOID OVER-GREASING.
EXCESS GREASE WILL ACCUMULATE
CONTAMINATES AND CAUSE PREMATURE
WEAR.
DRAW BAR
IMPORTANT — DRUM HEAD SEAL CARE
Grease seals every 40 hours of operation using
any grade #1 lithium base grease. Apply
grease until visible inside of mixing tub
(overgrease). This will purge seal system of
contamination.
K
DRUM GRILL
STEP 3
E
CTOR LINK
The drum opening is covered by a steel grill that is hinged for
easy cleaning.This grill should be closed at all times when mixer
is in use. Do not remove the grill or grill opening bar. Keep the
grill clean by washing it down daily.
DRAW BAR
CAUTION:Stop the engine before allowing anybody to put their
hands in the mixing drum.
TOWING — Before towing, check with local and state
laws for proper compliance.
REMOVE EXCESS
CHAIN (SLACK)
The tow bar and chain must be properly attached to the mixer
and towing vehicle prior to towing. Refer to the following
installation instruction:
BOTTOM CONNECTOR LINK
SAFETY CHAIN .........................................P/N 13363
CONNECTOR LINK ...................................P/N 01004
Step 1. Insert the Draw Bar into the main frame. Secure, utilizing
the ¾" bolt (grade 5) and nylock nut.Tighten to 100 foot pounds.
Step 2. Install the chain through the hole located between the
frame gusset and frame angle. Loop the chain together and place
under the Draw Bar.Secure with connector link.
Step 3. Extend the chain along the length of the Draw Bar,
remove excess chain (slack) and secure to bottom connector
link. Secure the chain to the towing vehicle, using the connector
link.
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — OPERATIONS
DANGER
BEFORETOWING
The following is the recommended wiper blade adjustments:
1) STEEL DRUM MIXERS
BALL HITCH COUPLER
1.
Check vehicle hitch, ball, and coupler for signs of wear or
damage. Replace any parts that are worn or damaged
before towing.
2.
Use only the 2" ball diameter as indicated on your coupler.
Use of any other ball diameter will create an extremely
dangerous condition which can result in separation of the
coupler and ball or ball failure.
3.
4.
Be sure the coupler is secured to the hitch ball and the
lock lever is down tight and locked.
Recheck tightness again after towing about 50 miles.
Check that trailer safety chains are properly connected.
RECOMMENDED MAINTENANCE
1.
Smear ball socket and clamp face with chassis grease.
Periodically oil pivot points and solutions surfaces of
coupler with SAE 30 wt. motor oil.
2.
When parking or storing your trailer. Keep the coupler off
the ground so dirt will not build up in the ball socket.
2) POLYETHYLENE DRUM MIXERS
DANGER
If housing is deformed,
replace complete coupler.
USE ONLY GENUINE
FULTON REPAIR KITS.
CLEANING — BLADE ADJUSTMENTS
Always disconnect the spark plug wire before cleaning the inside
of the drum.
Never pour or spray water over the gasoline engine or electric
motor.
The poly blade should come as close as possible to the surface
without touching. If material builds up on the drum, you may use
a rubber mallet to dislodge the material without adverse effect to
the drum.
For consistent performance, long life and high quality mixing,
thoroughly clean the mixer inside and out at the end of each
day’s operation. To prevent lumps of dried mortar from forming
and contamination of future batches, do not allow a buildup of
materials to form on the blades or anywhere inside the drum.
IMPORTANT NOTICE
EPOXY COMPATIBILITY —There are some expoxies and other
chemicals used in certain applications that are not compatible
with polyethylene tubs.
Since Whiteman Industries cannot control the end user’s
application of this product, we will not assume responsibility for
the resulting damages when exposed to incompatible chemicals.
PAGE 10 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — SPECIFICATIONS
WM-700S SPECIFICATIONS
MODEL
U.S.(inch)
METRIC
CAPACITY ....................................................7 CUBIC FEET ....................................................... 198 LITERS
BAG CAPACITY .............................................1½ - 2½ ............................................................ 1½ - 2½
WEIGHT (appROX.).......................................788 LBS. ............................................................. 357 KG.
L
X
W
X
H ..................................................71
X
50
X
56 IN. .................................................. 180
X
127
X
142 CM.
LENGTH W/TOW BAR ......................................98 IN. ................................................................. 248 CM.
HEIGHT W/DUMP HANDLE ................................73 IN. ................................................................. 185 CM.
DISCHARGE HEIGHT .......................................21 IN. ................................................................. 53 CM.
DRIVE .........................................................V-BELT TO GEAR ..................................................... —
DUMP ACTION ..............................................MANUAL ............................................................... —
WM-700P SPECIFICATIONS
MODEL
U.S.(inch)
METRIC
CAPACITY ....................................................7 CUBIC FEET ....................................................... 198 LITERS
BAG CAPACITY .............................................1½ - 2½ ............................................................ 1½ - 2½
WEIGHT (APPROX.) ........................................788 LBS. ............................................................. 357 KG.
L
X
W
X
H ..................................................71
X
50
X
56 IN. .................................................. 180
X
127
X
142 CM.
LENGTH W/TOW BAR ......................................98 IN. ................................................................. 248 CM.
HEIGHT W/DUMP HANDLE ................................73 IN. ................................................................. 185 CM.
DISCHARGE HEIGHT .......................................21 IN. ................................................................. 53 CM.
DRIVE .........................................................V-BELT TO GEAR ..................................................... —
DUMP ACTION .............................................MANUAL .............................................................. —
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLANATION OF CODE IN REMARKS COLUMN
How to read the marks and remarks used in this parts book.
Section 1: Items Found In the “Remarks” Column
Serial Numbers-Where indicated, this indicates a serial
number range (inclusive) where a particular part is used.
Model Number-Where indicated, this shows that the
corresponding part is utilized only with this specific model
number or model number variant.
Section 2: Items Found In the “Remarks” Column
Serial Numbers-Where indicated, this indicates a serial number
range (inclusive) where a particular part is used.
Model Number-Where indicated, this shows that the
corresponding part is utilized only with this specific model number
or model number variant.
Section 3: Items Found In the “Items Number” Column
All parts with same symbol in the number column, , #,
, belong to the same assembly or kit.
+
, %, or
*
ꢀ
Note: If more than one of the same reference number is listed,
the last one listed indicates newest (or latest) part available.
NOTE
If more than one of the same reference number is
listed, the last one listed indicates newest (or latest)
part available.
NOTE
The contents of this catalog are
subject to change without notice.
PAGE 12 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — SUGGESTED SPARE PARTS
WM-700S/P
WM-700S/P
1 to 3 Units
5+ Units
Qty.
P/N
Description
Qty.
P/N
Description
3 ......... EM505834 ........... V-BELT
5 ......... EM505834 ........... V-BELT
3 ......... EM507846 ........... V-BELT, WM-700 ELECTRIC MOTOR
6 ......... 491010 ................ LATCH ASSY
3 ......... EM203010 ........... BLADE KIT STEEL DRUM
3 ......... EM204624 ........... BLADE KIT POLY DRUM
2 ......... EM902153 ........... BEARING, DRUM HEAD
2 ......... 3131 .................... O-RING, DRUM HEAD
2 ......... 3530 .................... SEAL KIT
5 ......... EM507846 ........... V-BELT, w/ELECTRIC MOTOR
10 ....... 491010 ................ LATCH ASSY
5 ......... EM203010 ........... BLADE KIT STEEL DRUM
5 ......... EM204624 ........... BLADE KIT POLY DRUM
4 ......... EM902153 ........... BEARING, DRUM HEAD
4 ......... 3131 .................... O-RING, DRUM HEAD
1 ......... EM940734 ........... SWITCH, ON/OFF
2 ......... 3351 .................... DRIVEN PINON GEAR
1 ......... EM500083 ........... DUMP HANDLE, POLY DRUM
1 ......... EM201537 ........... DUMP HANDLE, STEEL DRUM
4 ......... 3530 .................... SEAL KIT
1 ......... 3351 .................... PINION GEAR
2 ......... 3065 .................... SEAL, AXLE
2 ......... 3469 .................... DUST CAP AXLE
2 ......... EM903049 ........... BEARING CONE UP TO S/N HL60000
2 ......... EM903113 ........... BEARING CONE STARTING S/N JA00000
2 ......... EM903012 ........... BEARING CUP
NOTE
Part numbers on this Suggested
Spare Parts List may supercede/
replace the P/N shown in the text
pages of this book.
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — DRUM HEAD AND PADDLE SHAFT ASSY
DRUM HEAD
END
27
26
25
28
PADDLE SHAFT ASSEMBLY
PAGE 14 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — DRUM HEAD AND PADDLE SHAFT ASSY
DRUM HEAD & PADDLE SHAFT ASSEMBLY
DRUM HEAD
NO.
PART NO.
EM200297
EM968011
EM200292
3249
PART NAME
U-BOLT
NUT HEX ½-13
U-BOLT INSERT
QTY.
REMARKS
2
2
4
4
3
4
5
6
6
7
8
9
DUST CAP ............................................................................... 1 ................. REPLACES 50017
BEARING
EM902153
EM507720
500076
EM916019
5028 B
2
BRACKET, DUMP BEARING ................................................... 2 ................. STARTING S/N 750180
BRACKET, DUMP BEARING ................................................... 2 ................. S/N 750000 THRU 750105
GREASE ZERK ........................................................................ 2 ................. REPLACES 491705
COTTER PIN 1/8 X 2 ............................................................... 2 ................. REPLACES 491690
CASTLE NUT .......................................................................... 2 ................. REPLACES 502246
SPACER................................................................................... 2 ................. REPLACES 500089
O-RING .................................................................................... 2 ................. REPLACES 491040
SEAL ........................................................................................ 2 ................. REPLACES 504749
DRUM HEAD, BEARING BOSS ............................................... 2 ................. STARTING S/N 750180
DRUM HEAD, BEARING BOSS ............................................... 2 ................. S/N 750000, THRU 750105
REPLACES 500085
8164
10
11
12
13
13
3047
3131
13002
507719
3291
*
14
15
29
30
3024
3061
3019
3494
3530
SPRING ................................................................................... 2 ................. REPLACES 491930
THIN SEAL SPACER ............................................................... 14 ............... REPLACES 500088
SEAL ........................................................................................ 4 ................. REPLACES 500086
SEAL URETHANE ................................................................... 2 ................. REPLACES 500613
*
*
SEAL KIT, PADDLE SHAFT ..................................................... 1 ................. INCLUDES ITEMS w/
*
PADDLE SHAFT ASSEMBLY
NO.
1
PART NO.
PART NAME
QTY.
1
1
1
1
1
4
2
4
4
2
2
1
REMARKS
EM507269
EM202899
EM202897
EM202898
EM202896
EM202928
EM202927
EM202929
EM507497
EM507496
EM202926
EM963110
6109180
PADDLE SHAFT
PADDLE ARM-TOW END
PADDLE ARM-CENTER
16
17
18
19
20
PADDLE ARM-ENGINE END
PADDLE ARM-CENTER
TOP STEEL BLADE
DRUM END STEEL BLADE
TOP RUBBER BLADE (STEEL) DRUM ONLY
TOP PLASTIC BLADE (POLY) DRUM ONLY
DRUM END PLASTIC BLADE (POLY) DRUM ONLY
DRUM END RUBBER BLADE (STEEL) DRUM ONLY
BOLT ½-13 X 3 ¾
#
#
*
21
22
*
*
22#
23#
23
*
25
26
27
28
LOCK WASHER ½ ................................................................... 1 ................. REPLACES EM923638
HEX NUT 1/2-13 ...................................................................... 1
EM968011
507270
SPACER BULL GEAR
1
EM203010
EM204624
EM203029
BLADE KIT, (STEEL) DRUM ONLY .......................................... 1 ................. INCLS w/ AND MTG. & HDWR
BLADE KIT, (POLY) DRUM ONLY ............................................ 1 ................. INCLS w/# AND MTG. & HDWR
HARDWARE KIT, (RUBBER/POLY BLADES) ........................... 1 ................. INCLUDED IN BLADE KITS
*
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S — STEEL DRUM
STEEL DRUM
109
108
110 111
PAGE 16 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S — STEEL DRUM
WM-700S - STEEL DRUM
NO.
100
101
101
101
PART NO.
EM201537
ELC1
PART NAME
DUMP HANDLE
QTY.
1
REMARKS
*
TOWING TONGUE (P. EYE) .................................... 1 .............. NO LONGER AVAILABLE
TOWING TONGUE (PIN HOLE) .............................. 1 .............. CONTACT MQ SALES DEPT./ACCESSORY ITEM
TOWING TONGUE (BALL HITCH) .......................... 1 .............. CONTACT MQ SALES DEPT./ACCESSORY ITEM
CAP SCREW ........................................................... 1 .............. REPLACES 505067
LOCK NUT ............................................................... 1 .............. REPLACES 505069
DRUM GRILL
EPC1
EBC1
102
103
104
EM963580
EM969038
EM203333
EM507271
508097
1
1
*
105
106+
GRILL OPEN BAR
*
DRUM ASSY (STEEL) ............................................. 1 .............. INCLS. ITEMS w/
*
508098
DRUM & SHAFT ASSY. (COMPLETE)(STEEL) ...... 1 .............. INCLS. ITEMS w/+ AND DRUM HEAD &
PADDLE SHAFT ASSY
108
109
110
111
❑
EM506309
507264
EM507421
EM507835
13363
MAIN FRAME
1
1
1
1
1
2
CLUTCH LEVER
DUMP LATCH
CLEVIS PIN
SAFETY CHAIN
5/16" CONNECTOR LINK
❑
❑
01004
ILLUSTRATED ON PAGE 9
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700P — POLYETHYLENE DRUM
121
122
123
124
125
126
116
123
124
PAGE 18 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700P — POLYETHYLENE DRUM
POLYETHYLENE DRUM
MODEL WM-700P
NO.
PART NO.
13000
PART NAME
QTY.
REMARKS
115
PLASTIC DRUM (W/O GRATES) ............................................. 1 ...................... REPLACES 504522
*
116
117
118
119
120
507495
504534
504535
507493
500083
508022
SUPPORT DRUM
STATIONARY GRATE
MOVEABLE GRATE
GRATE OPEN BAR
DUMP HANDLE
1
1
1
1
1
*
*
*
*
DRUM & SHAFT ASSY (COMPLETE) (POLY) ........................ 1 ...................... INCLS ITEMS w/ AND DRUM
*
HEAD & PADDLE SHAFT ASSY
121
122
123
124
125
126
EM963610
EM969013
504987
EM969079
504943
HHCS 3/8" NC X 1 1/4" G-5 .................................................... 7 ...................... REPLACES 492376
LOCK NUT 3/8" NC ................................................................. 7 ...................... REPLACES492583
FHCS 1/4" NC X 1" G-5
LOCK NUT 1/4" NC ................................................................. 8 ...................... REPLACES 492581
FHCS 3/8" NC X 2" G-5 12
LOCK NUT 3/8" NC ................................................................. 12 .................... REPLACES 492583
8
EM969013
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — GAS ENGINES, PULLEYS & CAB ASSEMBLY
C
PAGE 20 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — GAS ENGINES, PULLEYS & CAB ASSEMBLY
GAS ENGINES, PULLEYS & CAB ASSEMBLY
COMMON PARTS
NO.
150
151
152
153
154
155
156
157
158
159
167
168
169
170
171
PART NO.
507158
PART NAME
CAB ASSEMBLY
QTY.
1
REMARKS
491010
502228
LATCH ASSEMBLY ..................................... 2......... REPLACES 504744
DRIVE GEAR 16-1/2 DIA.
ROD END
SPRING
IDLER PULLEY
PILLOW BLOCK BEARING
SPRING CLIP
DRIVEN PINION GEAR .............................. 1 ......... REPLACES 500272
SWITCH, ON/OFF
COUNTER SHAFT
SNAP RINGS .............................................. 2......... REPLACES 490957
KEY
1
2
1
1
2
1
EM959080
EM102014
EM901515
EM905016
EM203098
3351
EM940734
502226
JISB2804C25
500214
1
1
1
1
1
EM963064
1141
BOLT 3/8 X16 X 3-1/4
KEY
MODEL WM 700 w/HONDA
NO.
161
161
162
162
163
164
165
166
PART NO.
PART NAME
QTY.
REMARKS
GX240K1HA2
GX160K1HX2
492057
HONDA ENGINE GX240 K1HA 8HP .......... 1 ......... REPLACES 493261
HONDA ENGINE GX160 5.5HP ENG.
DRIVEN PULLEY-LARGE
DRIVE PULLEY-5.5 HP
DRIVE PULLEY-SMALL 1" BORE 8.0 HP
V-BELT
THREADED ROD
IDLER ARM
1
1
1
1
2
1
1
492055
EM901074
EM505834
EM507490
EM507491
MODEL WM 700 w/WISCONSIN
NO.
161
162
163
164
165
166
PART NO.
EM937171
EM505204
505205
PART NAME
QTY.
REMARKS
ENGINE WISCONSIN BKN2-408472 ......... 1 ......... REPLACES 505208
DRIVEN PULLEY
DRIVE PULLEY
V-BELT
THREADED ROD
IDLER ARM
1
1
2
1
1
507775
EM507771
EM203352
MODEL WM 700 w/ROBIN
NO.
161
161
162
163
164
165
166
PART NO.
PART NAME
QTY.
REMARKS
W1280800466
EH252YR0000
492057
ROBIN ENGINE 8HP EY-28 ........................ 1 ......... UP TO OCTOBER, 1999
ROBIN ENGINE 8HP EH25-2 ..................... 1 ......... STARTING OCTOBER, 1999, REPLACES 493260
DRIVEN PULLEY-LARGE
DRIVE PULLEY-SMALL
V-BELT
1
1
2
1
1
492054
EM505834
EM507490
EM203352
THREADED ROD
IDLER ARM
MODEL WM-700 w/B&S
NO.
161
161
162
163
164
165
166
PART NO.
PART NAME
QTY.
REMARKS
1964521049
1352321036E1
492057
EM901074
EM505834
EM507490
EM507491
B&S ENGINE 8HP ...................................... 1......... REPLACES 493181
B&S ENGINE 5HP
DRIVEN PULLEY-LARGE
DRIVE PULLEY-SMALL 1" BORE
V-BELT
THREADED ROD
IDLER ARM
1
1
1
2
1
1
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — ELECTRIC MOTOR & PULLEYS
PAGE 22 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — ELECTRIC MOTOR & PULLEYS
ELECTRIC MOTOR & PULLEYS
NO.
161
162
163
164
165
166
PART NO.
PART NAME
QTY.
REMARKS
P145K17DB45A
EM505204
502213
EM507846
EM507490
EM507713
507715
ELECTRIC MOTOR 1.5 H.P .............................................................. 1 ................. REPLACES 939275 & 3197
DRIVEN PULLEY
DRIVE PULLEY ................................................................................. 1 ................. REPLACES 901019
V-BELT
1
2
1
1
THREADED ROD
IDLER ARM
GUIDE, V-BELT .................................................................................. 1 ................. NOT ILLUSTRATED
FOR COMMON PARTS SEE PAGE 21
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — AXLE & WHEEL GROUP
PAGE 24 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
WM-700S, 700P — AXLE & WHEEL GROUP
AXLE & WHEEL GROUP
NO.
200
200
201 #
202
203
204
204
205
206
207
208
209 #
210 #
211
211#
212 #
213
213
PART NO.
EM507407
511334
EM914288
EM501299
EM511159
3068
8164
0183
3005
3469
EM942000
3469
8115
EM903049
EM903113
EM903012
3504
PART NAME
QTY.
REMARKS
AXLE ................................................... 1 .................. UP TO S/N HL60000
AXLE ................................................... 1 .................. STARTING S/N JA00000
SEAL
THICK SPACER .................................. 2 .................. 1" INSIDE DIAMETER
THIN SPACER .................................... 2 .................. 1" INSIDE DIAMETER
AXLE NUT ........................................... 2 .................. UP TO S/N HL60000
AXLE NUT ........................................... 2 .................. STARTING S/N JA00000
COTTER PIN
RIM & TIRE ONLY
GREASE CAP
VALVE STEM ....................................... 1 .................. REPLACES 942052
DUST CAP
LUG NUT
BEARING CONE ................................. 2 .................. UP TO S/N HL60000
BEARING CONE ................................. 2 .................. STARTING S/N JA00000
BEARING CUP
2
*
2
2
1
2
8
*
*
*
2
*
HUB W/CUPS ...................................... 2 .................. UP TO S/N HL60000, INCLUDES ITEM w/
HUB W/CUPS ..................................... 2 .................. STARTING S/N JA00000, INCLUDES ITEM w/#
*
EM941306
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective: July 1, 2000
TERMS AND CONDITIONS OF SALE — PARTS
PAYMENT TERMS
4. Freight is at the sender’s expense. All
partsmustbereturnedfreightprepaidto
Multiquip’sdesignatedreceivingpoint.
PRICINGANDREBATES
Terms of payment for parts are net 10 days.
Prices are subject to change without prior
notice.Pricechangesareeffectiveonaspecific
dateandallordersreceivedonorafterthatdate
willbebilledattherevisedprice. Rebatesfor
price declines and added charges for price
increases will not be made for stock on hand
at the time of any price change.
5. Parts must be in new and resalable
condition,intheoriginalMultiquippackage
(ifany),andwithMuiltiquippartnumbers
clearly marked.
FREIGHT POLICY
All parts orders will be shipped collect or
prepaidwiththechargesaddedtotheinvoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier,andanyclaimforshortageordamage
mustbesettledbetweentheconsigneeandthe
carrier.
6. Thefollowingitemsarenotreturnable:
Multiquip reserves the right to quote and sell
directtoGovernmentagencies,andtoOriginal
Equipment Manufacturer accounts who use
our products as integral parts of their own
products.
a. Obsolete parts.(If an item is listed
in the parts price book as being
replaced by another item, it is
obsolete.)
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
andotherrubberparts)thatwere
purchasedmorethansixmonths
priortothereturndate.
MINIMUMORDER
SPECIAL EXPEDITING SERVICE
TheminimumchargeforordersfromMultiquip
is $15.00 net. Customers will be asked for
instructionsregardinghandlingofordersnot
meetingthisrequirement.
A$20.00to$50.00surchargewillbeaddedto
theinvoiceforspecialhandlingincludingbus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
c. Anylineitemwithanextendeddealer
netpriceoflessthan$5.00.
d. Special order items.
RETURNED GOODS POLICY
e. Electricalcomponents.
LIMITATIONS OF SELLER’S LIABILITY
Returnshipmentswillbeacceptedandcredit
will be allowed, subject to the following
provisions:
f.
Paint, chemicals, andlubricants.
Multiquip shall not be liable here under for
damagesinexcessofthepurchasepriceofthe
item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
g. Decalsandpaperproducts.
h. Items purchased in kits.
1. AReturnedMaterialAuthorizationmust
beapprovedbyMultiquippriortoshipment.
7. Thesenderwillbenotifiedofanymaterial
receivedthatisnotacceptable.
2. ToobtainaReturnMaterialAuthorization,
alistmustbeprovidedtoMultiquipParts
Sales that defines item numbers,
quantities,anddescriptionsoftheitems
tobereturned.
8. Such material will be held for 5 working
days from notification, pending
instructions. If a reply is not received
within5days,thematerialwillbereturned
tothesenderathisexpense.
LIMITATIONOFWARRANTIES
a. Thepartsnumbersanddescriptions
must match the current parts price
list.
Nowarranties,expressorimplied,aremade
in connection with the sale of parts or trade
accessories nor as to any engine not
manufacturedbyMultiquip.Suchwarranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes not
authorizes any person to assume for it any
other obligation or liability whatever in
connectionwiththesaleofitsproducts.Apart
fromsuchwrittenstatementofwarranty,there
arenowarranties,express,impliedorstatutory,
which extend beyond the description of the
productsonthefacehereof.
9. Creditonreturnedpartswillbeissuedat
dealer net price at time of the original
purchase,lessa15%restockingcharge.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted for
which the original purchase document
can not be determined, the price will be
basedonthelistpricethatwaseffective
twelve months prior to the RMA date.
c. Thelistmuststatethereason(s)for
thereturn.
d. The list must reference the sales
order(s) or invoice(s) under which
theitemswereoriginallypurchased.
11. Credit issued will be applied to future
purchasesonly.
e. Thelistmustincludethenameand
phonenumberoftheperson
requestingtheRMA.
3. A copy of the Return Material
Authorizationmustaccompanythereturn
shipment.
PAGE 26 —WHITEMANWM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
WHITEMAN WM-700S, 700P — PARTS & OPERATION MANUAL — REV. #7 (06/26/01) — PAGE 27
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS AND OPERATION MANUAL
HERE'S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL NUMBER
ON-HAND WHEN CALLING
PARTS DEPARTMENT
800-427-1244 or 310-537-3700
FAX: 800-672-7877 or 310-637-3284
^6668
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE
800-478-1244 or 310-537-3700
FAX: 310- 537-4259
WARRANTY DEPARTMENT
888-661-4279, or 310-661-4279
FAX: 310- 537-1173
MAIN
800-421-1244 or 310-537-3700
FAX: 310-537-3927
MULTIQUIP INC.
POST OFFICE BOX 6254
CARSON, CA 90749
310-537-3700 • 800-421-1244
FAX:310-537-3927
WWW:multiquip.com
Atlanta • Boise • Dallas • Houston • Newark
Quebec, Canada • Manchester, UK • Rio De Janiero, BR • Guadalajara, MX
Download from Www.Somanuals.com. All Manuals Search And Download.
|