Miele Washer w 304 plus User Manual

Operating instructions  
for Washing machine  
W 304 Plus  
To avoid the risk of accidents or  
damage to the machine it is  
essential to read these operating instructions  
before it is installed or used for the  
first time.  
G
M.-Nr. 06 020 350  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and safety instructions  
the data plate (fusing, voltage and  
Read the operating instructions be-  
fore using this machine for the first  
time. They contain important infor-  
mation about the safety, use and  
maintenance of the machine. This  
way you will avoid the risk of acci-  
dents and damage to the machine.  
Keep these operating instructions in  
a safe place and ensure that new  
users are familiar with the content.  
Pass them on to any future owner of  
the machine.  
frequency) match the mains electricity  
supply. If in any doubt, consult a  
qualified electrician.  
The electrical safety of this appli-  
ance can only be guaranteed when  
continuity is complete between the ma-  
chine and an effective earthing system  
which complies with local and national  
regulations. It is most important that this  
basic safety requirement is present and  
regularly tested and where there is any  
doubt the household wiring system  
should be inspected by a qualified  
electrician.  
Correct usage  
The manufacturer cannot be held liable  
for the consequences of an inadequate  
earthing system (e.g. electric shock).  
Only use the washing machine to  
wash items which are specified by  
the manufacturer to be machine-wash-  
able on the wash-care label, and tex-  
tiles composed of hand-washable wool  
or wool blend fabrics as well as satin,  
lace, silk and other hand-washable  
garments.  
Any other applications may be danger-  
ous. The manufacturer is not liable for  
damage resulting from improper use or  
operation.  
Do not connect the appliance to  
the mains electricity supply by an  
extension lead. Extension leads do not  
guarantee the required safety of the  
appliance (e.g. danger of overheating).  
The machine is built in accordance  
with current safety requirements.  
Unauthorised repairs could result in un-  
foreseen dangers for the user, for which  
the manufacturer cannot accept liability.  
Repairs should only be undertaken by a  
Miele approved technician.  
Ensure current is not supplied to the  
appliance while maintenance or repair  
work is being carried out.  
This appliance is not a toy! To  
avoid the risk or injury do not allow  
children to play on or near it or to play  
with the controls. Supervise its use by  
the elderly or infirm.  
Technical safety  
The machine is only completely  
isolated from the electricity supply  
when:  
Before setting up the machine,  
check it for any externally visible  
damage. Do not install and use a  
damaged machine.  
– it is switched off at the wall socket  
and the plug is withdrawn, or  
Before connecting the machine,  
ensure that the connection data on  
– it is switched off at the mains, or  
– the mains fuse is withdrawn.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Warning and safety instructions  
This machine must only be  
connected to the on-site water  
Do not install your washing  
machine in rooms where  
supply using a new hose kit. Old hoses temperatures below freezing may  
must not be re-used. Check the hose  
regularly for signs of wear and tear.  
occur. Frozen hoses may burst under  
pressure. The reliability of the electronic  
Change in good time to avoid the risk of control unit may be impaired at  
leaks and subsequent damage.  
temperatures below freezing point.  
Faulty components must only be  
replaced by genuine Miele original  
spare parts. Only when these parts are  
fitted can the safety standards of the  
machine be guaranteed.  
Before using the machine for the  
first time, check that the transit  
fitting at the rear of the machine has  
been removed (see section on  
"Installation"). During spinning, a transit  
fitting which is still in place may result in  
damage to both the machine and  
adjacent furniture or appliances.  
If the connection cable is faulty it  
must only be replaced by a Miele  
approved service technician to protect  
the user from danger.  
Turn off the stopcock if the  
machine is to be left for any length  
of time (e.g. holiday), especially if there  
is no floor drain (gully) in the immediate  
vicinity.  
In countries where there are areas  
which may be subject to infestation  
by cockroaches or other vermin, pay  
particular attention to keeping the  
appliance and its surroundings in a  
clean condition at all times. Any  
Flooding danger.  
If hooking the drain hose into a  
wash basin, check that the water can  
damage which may be caused by  
cockroaches or other vermin will not be drain off quickly enough to prevent the  
covered by the appliance guarantee.  
sink from overflowing.  
Make sure the drain hose is secure, so  
that the force of the water flowing out of  
the hose does not dislodge it.  
Use  
This equipment is not designed for  
maritime use or for use in mobile  
installations such as caravans, aircraft  
etc. However it may be suitable for  
such usage subject to a risk  
assessment of the installation being  
carried out by a suitably qualified  
engineer.  
Otherwise this will result in flooding.  
Take care to ensure that foreign  
objects (e.g. nails, pins, coins,  
paper clips) do not find their way into  
the machine with the laundry. These  
may damage components of the  
machine (e.g. suds container, drum),  
which in turn can result in damage to  
the laundry.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and safety instructions  
If the correct amount of detergent  
is dispensed, the machine should  
For machines with a ‘porthole’  
door, remember that the porthole  
glass will be hot when washing at very  
high temperatures. Do not let children  
touch it.  
not need to be descaled. If, however,  
you do wish to descale the machine  
only use proprietary non-corrosive  
descaling agents and strictly observe  
the instructions on the packaging. If in  
doubt, contact the Miele Customer Ser-  
vice Dept. or your Miele Dealer.  
Always make sure the drum is  
stationary before reaching in to  
remove washing. Reaching into a  
moving drum is extremely dangerous.  
Textiles which have been  
pre-treated in solvent based  
cleaning agents must be thoroughly  
rinsed in clean water before being  
washed in the machine.  
Accessories  
Accessory parts may only be fitted  
when expressly approved by Miele.  
If other parts are used, guarantee,  
performance and product liability  
claims will be invalidated.  
Never use solvent based cleaning  
agents in this machine, as this may  
result in damage to component parts  
and create toxic fumes. Such  
detergents also pose a fire and  
explosion hazard.  
Disposal of your old machine  
Before discarding an old machine,  
switch it off at the wall socket and  
unplug it. Render the plug useless. Cut  
off the cable directly behind the  
appliance to prevent misuse. This  
should be done by a competent  
person.  
Only use dyes specified by the  
manufacturer as being suitable for  
use in a domestic washing machine.  
Always observe the manufacturer's  
instructions carefully.  
Colour run and dye removers  
contain sulphur compounds which  
can cause damage such as corrosion.  
Do not use these products in this  
machine.  
The manufacturer cannot be held  
liable for damage caused by  
non-compliance with these Warning  
and Safety instructions.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
Special programmes  
Delicates and Silks / programmes  
– Programme for hand-washable  
In these programmes the laundry is  
washed and spun very gently to reduce  
creasing and the amount of ironing  
required, thus providing "Easy care" for  
your laundry.  
fabrics (Silks /)  
Hand-washable fabrics which crease  
easily but do not contain wool can be  
washed in the Silks / programme  
(30°C temperature only).  
Water plus system  
– Programme for hand-washable  
The water level for washing and rinsing  
is increased. For Cottons programmes  
an additional rinse can also be  
selected.  
fabrics (Woollens /)  
Hand-washable or  
machine-washable wool or wool  
blend fabrics can be washed in the  
Woollens / programme. If the  
garment care label does not specify  
a temperature, wash using the cold  
setting.  
– Programme for small loads  
(Quick wash)  
This is a Cottons programme for very  
lightly soiled fabrics.  
– Programme for mixed fabrics  
(Mixed wash)  
Suitable for small loads of garments  
made from man-made fibres and  
cotton garments which can be  
washed together. Sort according to  
colour.  
– Rinse programme (Separate rinse)  
Articles are only rinsed and spun in  
the machine.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Description of the appliance  
Future updates (PC)  
The indicator or check light marked PC  
allows a service engineer to update  
your machine in future years.  
When, for example, new programmes  
are developed or new fabrics are  
introduced, a service engineer will be  
able to modify existing programme  
cycles accordingly.  
Miele will provide information when  
such possibilities become available.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Description of the appliance  
Control panel  
aStart button  
fProgramme sequence indicator  
lights  
starts the wash programme  
show which section of the wash  
programme has been reached.  
bAdditional option buttons  
Additional options can be added to  
the basic programme.  
gCheck lights  
Use the top button to select either  
the Short, the Pre-wash or the Soak  
option. Use the lower button to select  
the Water plus option.  
Indicator light on = option selected  
Indicator light off = option not  
selected  
hI-On/0-Off button  
for switching the machine on or off or  
interrupting a programme  
iDoor button  
opens the machine door  
cIndicator lights  
for spin speeds, Rinse hold or  
Without spin  
dSpin button  
for selecting the final spin speed,  
Rinse hold or Without spin  
eProgramme selector  
for selecting the wash programme  
and temperature for that programme.  
The programme selector can be  
turned clockwise or anti-clockwise.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Description of the appliance  
Important control panel  
features  
Select the spin speed.  
Press the "Spin" button to select a  
different spin speed. However, you  
cannot select a spin speed higher than  
the maximum allowed for the basic  
wash programme chosen.  
Programme selector  
The programme selector is used to set  
the basic wash programme and the  
temperature for that programme.  
The indicator lights show the speed  
selected.  
Additional option buttons  
You can also omit the final spin  
^ Press the "Spin" button to reach:  
– Rinse hold  
Additional options can be added to the  
basic programme.  
Use the top button to select either the  
Short, the Pre-wash or the Soak option.  
The laundry is not spun and remains  
suspended in the final rinse water.  
This reduces creasing if the laundry  
is not going to be removed from the  
drum immediately after the end of  
the programme.  
To continue the programme select a  
spin speed. When the programme is  
finished the Anti-crease/Finish light  
will come on. Turn the programme  
selector to the Finish position and  
press the door button to open the  
door and remove the laundry.  
Use the lower button to select the Water  
plus option.  
The indicator light will come on to show  
that the additional option has been  
selected.  
If an additional option is chosen, which  
is incompatible with the basic  
programme, it cannot be selected.  
"Spin" button with indicator lights  
The maximum spin speed which can be  
selected depends on the basic  
programme chosen.  
– Without spin  
The laundry is not spun after the final  
rinse. After the water has been  
drained away the machine goes  
straight into the anti-crease stage.  
Spinning between the rinses is also  
omitted in this setting (rinse and  
interim spin).  
Maximum  
spin  
Basic programme  
speed  
1300 Cottons, Quick wash, Drain/spin,  
Starch  
1200 Woollens, Separate rinse  
900 Minimum iron, Mixed wash  
600 Delicates  
400 Silks  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Before using for the first time  
Before using the machine for the first  
time ensure that it is correctly  
installed and connected. See the  
relevant section under "Installation".  
Also check that the fluff filter is  
securely tightened. Otherwise there  
is a risk of water leakage during use.  
For safety reasons spinning is not  
possible until the machine has been  
prepared for using for the first time. To  
activate the spinning function you must  
run a wash programme without laundry  
and without detergent.  
Using detergent could result in an  
excessive build-up of foam.  
This also activates the ball valve. The  
ball valve prevents detergent escaping  
from the suds container into the sump  
during a wash programme, thus making  
maximum use of the detergent.  
^ Turn on the stopcock.  
^ Press the I-On/0-Off button in.  
^ Turn the programme selector to  
Cottons 40°C.  
^ Press the "Spin" button repeatedly to  
select Without spin.  
^ Press Start.  
When this programme has finished turn  
the programme selector to Finish. Your  
washing machine is ready for using for  
the first time.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Washing environmentally and economically  
– Water consumption and energy  
usage are determined by the size of  
the load. Load to the maximum  
recommended for the programme  
selected.  
– Use the Short wash option for  
normally or very lightly soiled  
laundry.  
– Do not exceed the amount of  
detergent recommended by the  
manufacturer on the packaging.  
To save energy wash normally and  
lightly soiled laundry at lower  
– Reduce the amounts of detergent  
with smaller loads, (e.g. with a half  
load, approx. one third less  
detergent).  
temperatures. The 95°C Cottons  
programme is probably only needed  
in exceptional circumstances, e.g.  
for oil based stains or where a very  
hot wash is required.  
– Select the highest suitable spin  
speed in the wash programme when  
tumble drying afterwards.  
– Use the Mixed wash or the Quick  
wash programme for smaller  
amounts of laundry.  
– Load recognition and automatic  
rinsing can cause the duration of a  
programme to vary greatly. The main  
wash may be shortened and a rinse  
cycle omitted depending on the  
amount of laundry.  
– A main wash (programme without  
pre-wash) is sufficient for cleaning  
normally soiled laundry.  
– By using the additional option Soak  
for heavily soiled laundry you can  
select a lower temperature in the  
main wash.  
– Use the additional option Soak  
instead of Pre-wash with heavily  
soiled laundry.  
If Soak is followed immediately by a  
main wash the same suds are used.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
Brief instructions  
See the "Programme chart" in the next  
section for information on which  
programmes to use for different fabric  
types.  
Please note:  
To help familiarise yourself with how to  
use your washing machine please read  
the sections "Before washing",  
"Selecting a programme" and "At the  
end of a programme" in detail.  
ASort the laundry into colours and  
fabric types  
Selecting a programme:  
BSwitch on the washing machine  
COpen the drum door  
DLoad the drum  
EClose the drum door  
FSelect a programme  
GSelect a spin speed  
HSelect any additional option required  
IAdd detergent  
JPress the Start button  
At the end of a programme:  
KOpen the drum door  
LRemove the laundry  
MSwitch off the washing machine  
NTurn the programme selector to the  
Finish position  
OClose the drum door  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
Programme chart  
Cottons 30°C to 95°C 9ö876  
Fabric  
Cottons and linen fabrics, e.g. bed linen, table linen,  
towelling, jeans, underwear, T-shirts, nappies.  
Additional options Short, Pre-wash, Soak, Water plus  
Notes  
Only use the Cottons 95°C programme for heavily soiled  
and incontinent laundry.  
For heavily soiled laundry and/or soiling which has been  
left unwashed for some time, select the Soak additional  
option.  
For laundry with large amounts of dirt (e.g. dust, sand)  
use the Pre-wash additional option.  
For lightly soiled laundry select the Short additional  
option.  
For dark coloured fabrics use a detergent for coloured  
fabrics, or liquid detergent.  
Detergent  
max. load  
Powder detergent, detergent for coloured fabrics, liquid  
detergent, tablet detergent and liquid tab detergent. See  
also "Detergent" section.  
5 kg  
Note for test institutes:  
Programme setting for testing according to EN 60456 standard: Cottons 60°C  
Minimum iron 30°C to 60°C 4321 876  
Fabric  
For garments made of synthetic fibres, mixed fibres and for  
easy care cotton shirts and blouses.  
Additional options Short, Pre-wash, Soak, Water plus  
Notes  
For heavily soiled laundry and/or soiling which has been  
left unwashed for some time, select the Soak additional  
option.  
Detergent  
max. load  
Powder detergent, detergent for coloured fabrics, liquid  
detergent, detergent for delicates. See also "Detergent"  
section.  
2.5 kg  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
Delicates cold to 40°C 21  
Fabric  
For delicate garments made of synthetic fibres, mixed fibres  
and for easy care cotton shirts and blouses.  
Curtains, including net curtains, specified as  
machine-washable by the manufacturer.  
Additional options Short, Pre-wash, Soak  
Notes  
Laundry remains relatively crease-free for easier ironing.  
Dust in curtains usually makes using a programme with  
Pre-wash advisable.  
For curtains made from delicate fabrics reduce the spin  
speed or select Without spin.  
Detergent  
Liquid detergent for delicates. See also "Detergent" section.  
1 kg  
max. load  
Silks 30°C /c  
Fabric  
Hand-washable fabrics with no wool content, e.g. satin, lace  
and silk.  
Additional options Water plus  
Notes  
Laundry remains relatively crease-free for easier ironing.  
Place socks, tights, bras etc.- in a washing bag.  
Liquid detergent for delicates. See also "Detergent" section.  
1 kg  
Detergent  
max. load  
Woollens cold to 40°C /ac  
Fabric  
Machine-washable or hand-washable wool or wool blend  
fabrics. If the care label does not specify a temperature,  
wash using the cold setting. Please note hand-washable  
garments will not shrink, stretch, matt or felt beyond the  
accepted tolerance of the item.  
Notes  
During the final spin the 1300 rpm indicator light will come  
on. However, to protect the laundry, the machine will only  
spin at 1200 rpm during this spin.  
Detergent  
max. load  
Liquid detergent for machine washable woollens. See also  
"Detergent" section.  
2 kg  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
Quick wash 40°C 7  
Fabric  
Very lightly soiled fabrics, which can be washed in the Cottons  
programme.  
Additional option Water plus  
Notes  
– Add less detergent (half load).  
– If fabrics have a high proportion of man-made fibres it is  
advisable to programme the machine for "Gentle Action".  
See "Programmable functions". Note that this programme  
is not suitable for delicate items.  
Detergent  
max. load  
Powder detergent, detergent for coloured fabrics, liquid detergent.  
2.5 kg  
Mixed wash 40°C 72  
Fabric Small loads of garments made from man-made fibres and cotton  
garments which can be washed together. Sort according to colour.  
Additional options Short, Pre-wash, Soak, Water plus  
Notes  
If fabrics have a high proportion of man-made fibres it is advisable  
to programme the machine for "Gentle Action". See "Programmable  
functions"  
Detergent  
max. load  
Starch  
Powder detergent, detergent for coloured fabrics, liquid detergent  
3 kg  
Fabric  
Table cloths, napkins, overalls, uniforms.  
Notes  
The laundry should be washed but not treated with fabric  
conditioner. Use liquid starch.  
max. load  
Separate rinse  
Fabric  
5 kg  
Articles which have been washed by hand and only need to be  
rinsed and spun in the machine.  
Notes  
During the final spin the 1300 rpm indicator light will come on.  
However, to protect the laundry, the machine will only spin at  
1200 rpm during this spin.  
max. load  
5 kg  
Drain/Final spin  
Notes  
To drain only: select Without spin.  
– Do not use for woollens  
max. load  
5 kg  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
Important - other care symbols  
/
Hand wash (If no temperature  
is specified use the lowest  
temperature or cold)  
h
Do not wash  
apf Dry clean  
D
y
Do not dry clean  
Suitable for chlorine  
bleaching  
z
Do not use chlorine bleach  
Tumble dry  
q
r
s
At normal temperature  
At low temperature  
Do not tumble dry  
Ironing  
I
H
G
J
Hot iron  
Medium hot iron  
Cool iron  
Do not iron  
N.B. If you have any textiles with the  
older wash care labels, select a  
programme according to the label  
below:  
[:\]  
?;\  
={  
Cottons  
Minimum iron  
Delicates  
Woollens  
#
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
Before washing  
,Do not use solvent-based  
ASort the laundry  
cleaning agents in this machine.  
^ Sort the laundry by colour and by  
care label symbol. Most garments  
have a textile care label in the collar  
or side seam.  
Dark textiles often contain excess dye  
and should be washed separately  
several times before being washed  
together with other garments. Always  
wash whites and coloureds separately.  
Delicate textiles should be washed  
separately in a delicates programme  
(use a washing bag where  
appropriate).  
^ Empty all pockets.  
– Curtains:  
,Foreign objects (e.g. nails,  
coins, paper clips, etc.) can cause  
damage to garments and  
Remove lead weights and strips or  
place in a laundry bag.  
components in the machine.  
– Underwiring and collar stiffeners:  
Any loose wiring in bras, shirt collar  
stiffeners, etc. should be removed or  
sewn in.  
^ Badly soiled areas, e.g. collars and  
cuffs, and water soluble stains can  
be pre-treated with bar soap, liquid  
detergent or detergent mixed into a  
solution or paste.  
– Knitted garments, trousers and  
jeans, T-shirts and sweat shirts:  
Turn inside out, if recommended by  
the manufacturer.  
With particularly stubborn stains ask  
your dry cleaner for advice.  
– Close any zips, fasten hooks and  
eyes etc before washing.  
– Fasten duvet covers to prevent  
smaller items rolling up inside them.  
,Do not wash any items in this  
machine which are specified by the  
manufacturer as not washable on  
the care label. (h symbol)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
Selecting a programme  
BSwitch on the washing machine  
^ Press in the I-On/0-Off button.  
COpen the drum door  
FSelect a programme  
^ Press the Door button and open the  
drum door.  
DLoad the drum  
^ Unfold the laundry and load loosely  
in the drum. To achieve best results it  
is advisable to make up mixed loads  
consisting of both large and small  
items. This improves the washing  
effect and helps distribute the load  
evenly to keep the machine stable  
and reduce the noise level during  
spinning.  
^ Turn the programme selector to the  
required programme.  
GSelect a spin speed  
To save energy and water try to load  
the maximum amount for the  
programme selected.  
However, be careful not to overload the  
machine. Overloading reduces the  
wash result and causes more creasing.  
EClose the drum door with a gentle  
swing.  
Make sure that no garments are caught  
between the drum door and seal.  
^ Press the "Spin" button repeatedly  
until the indicator light for the spin  
speed you want comes on.  
In some programmes the maximum  
spin speed is limited. The machine will  
not allow a higher spin speed to be  
selected.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
Additional options  
Pre-wash  
HSelect additional option(s) if  
For heavily soiled laundry and items  
with dried on stains.  
required.  
Additional options can be selected as  
long as they are compatible with the  
basic programme being used.  
Soak  
For heavily soiled and stained items  
with protein stains (e.g. blood, fats  
and oils, cocoa).  
Each press of the top button selects the  
additional option in the following order:  
Short, Pre-wash, Soak, no selection.  
– A length of time of between 30  
minutes and 2 hours can be  
programmed in 30 minute  
Use the lower button to select or  
deselect the Water plus option  
increments for the soak process.  
– The machine is set ex-works with a  
soak period of 2 hours.  
To programme in a different soak period  
see "Programmable functions - Soak".  
Water plus  
If you want to increase the water level  
for a wash process you can choose one  
of the four options for the Water plus  
button. The options are explained in the  
section on "Programmable functions -  
Water plus system".  
^ Press the appropriate additional  
option button. Press the top button  
repeatedly until the indicator light for  
the additional option you want comes  
on.  
The machine is set at the factory so that  
the water level in the main wash and  
rinses will be increased if the Water  
plus button is pressed.  
Short  
For lightly soiled items.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
IAdd detergent  
It is important to dispense the correct  
amount, because . . .  
. . . too little results in the following:  
– Laundry will not be properly clean  
and will in time become grey and  
hard to the touch.  
– Greasy particles cling to the laundry.  
– Limescale deposits on the heater  
elements.  
. . . too much results in the following:  
^ Pull out the detergent drawer and  
place detergent in the compartments  
as follows:  
– Excessive foam which causes a low  
level of agitation and poor wash,  
rinse and spin results.  
i = Detergent for Pre-wash  
(if selecting Pre-wash, add 1/4  
of the total amount recom-  
– High water consumption (an  
additional rinse cycle will  
automatically switch in).  
mended). This compartment is  
also used for starch formula-  
tions when starching separately.  
– A burden to the environment.  
j = Detergent for the main wash  
including Soak  
§
= Fabric conditioner or liquid  
starch.  
^ Close the detergent drawer.  
See section on "Detergent" for further  
information on detergent and the  
amount to dispense.  
JPress the Start button.  
This starts the programme.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
At the end of a programme  
Check that all items have been  
removed from the drum. Items left in  
the drum could discolour other items  
in the next wash or become  
When the Anti-crease/Finish indicator  
light comes on the laundry can be  
removed from the drum. (This light  
stays on at the end of the programme  
and remains on until the selector is  
turned back to the Finish position).  
discoloured themselves.  
MSwitch off the washing machine.  
KOpen the drum door  
^ Press the Door button.  
LRemove the laundry.  
^ Press and release the I-On/0-Off  
button and turn the programme  
selector to Finish. The  
Anti-crease/Finish light will then go  
out.  
,Only remove laundry from the  
machine once the drum has  
NClose the drum door  
stopped turning. Reaching into a  
moving drum is extremely  
dangerous and could result in injury.  
Otherwise there is the danger of  
objects being placed inadvertently in  
the drum. If these remained unnoticed  
and were washed in the next load, they  
could damage the laundry.  
^ Check the folds in the door seal for  
any small articles, e.g. buttons which  
may be lodged there.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
Adding or removing laundry  
after a programme has started  
The door cannot be opened, if:  
– the suds temperature is above 55°C.  
– the water is above a certain level.  
Laundry can be added or removed  
after the programme has started when  
using the following programmes:  
– the programme has reached the  
Final spin stage.  
– Cottons  
– Minimum iron  
– Quick wash  
– Mixed wash  
– Starch  
^ Press the Door button in and hold it  
until the door springs open.  
^ Add or remove items.  
^ Close the door.  
The programme will continue  
automatically.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
Interrupting a programme  
Skipping a programme stage  
^ Switch the washing machine off with  
the I-On/0-Off button.  
^ Turn the programme selector to  
Finish.  
To continue with the same programme:  
As soon as the programme sequence  
indicator light for the programme stage  
you want the programme to continue at  
starts flashing:  
^ Switch the washing machine back on  
again with the I-On/0-Off button.  
^ Turn the programme selector back  
again to the appropriate programme  
within 4 seconds.  
Altering a programme once  
selected  
The machine will accept the following  
changes after a programme has  
started:  
To cancel or select a different  
programme  
– at any time after the start, the spin  
speed can be changed within the  
limits for the programme.  
^ Switch the washing machine off with  
the I-On/0-Off button.  
^ Turn the programme selector to  
Finish.  
– up to 6 minutes after the start, the  
Water plus additional option can be  
selected or de-selected and a  
different temperature can be  
The programme has now been  
cancelled.  
selected for the programme in use.  
^ Switch the washing machine back on  
After the start of a programme it is no  
longer possible to select a different  
programme.  
with the I-On/0-Off button.  
^ Select a different programme.  
^ Press the Start button.  
If the programme selector is moved, the  
indicator light Anti-crease/Finish will  
start flashing. However, the programme  
sequence remains unaffected. The  
indicator light will go out again when  
the programme selector is moved back  
to the programme previously chosen.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
Programme sequence  
Minimum iron  
This washing machine has fully  
electronic controls with automatic load  
recognition. This machine takes in the  
right amount of water required for the  
programme depending on the amount  
of laundry and its absorbency rate. This  
means that programme cycles and  
durations shown in the display can  
vary.  
Main wash  
Water level: low  
Wash rhythm: normal  
Rinses  
Water level: high  
No of rinses: 2 or 31)  
Spinning  
Rinse and interim spin2): yes  
Final spin: yes  
The programme sequences outlined  
below are based on the basic  
programme with a full load. Additional  
options which can be selected have not  
been taken into account.  
Delicates  
Main wash  
Water level: high  
Wash rhythm: Gentle action  
Rinses  
The programme sequence indicator  
lights show the stage the programme  
has reached.  
Water level: high  
No of rinses: 3  
Cottons  
Main wash  
Spinning  
Rinse and interim spin: no  
Final spin: yes  
Water level: low  
Wash rhythm: normal  
Rinses  
Water level: medium  
No of rinses: 2 or 31)  
Spinning  
Rinse and interim spin2): yes  
Final spin: yes  
Silks /  
Main wash  
Water level: medium  
Wash rhythm: Silks  
Rinses  
Water level: medium  
No of rinses: 2  
Spinning  
Rinse and interim spin: no  
Final spin: yes  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
How to wash correctly  
Woollens /  
Main wash  
Starch  
Water level: low  
Water level: medium  
Wash rhythm: Woollens  
Rinses  
Wash rhythm: normal  
Final spin: yes  
Separate rinse  
Water level: medium  
No of rinses: 2  
Spinning  
Rinse and interim spin2): yes  
Final spin: yes  
Water level: high  
No of rinses: 2  
Final spin: yes  
Special features in the programme  
sequences:  
Quick wash  
Main wash  
Anti-crease:  
Water level: low  
Wash rhythm: normal  
Rinses  
At the end of every programme, with  
the exception of the Woollens  
programme, the anti-crease action  
switches on for a maximum of 30  
minutes. The door can be opened and  
laundry removed at any time during the  
anti-crease phase.  
1) A third rinse takes place  
automatically if:  
Water level: medium  
No of rinses: 2  
Spinning  
Rinse and interim spin2): yes  
Final spin: yes  
Mixed wash  
Main wash  
– there is too much foam in the drum  
– a spin speed of lower than 700 rpm  
has been selected.  
Water level: low  
Wash rhythm: normal  
Rinses  
Water level: high  
No of rinses: 2  
Spinning  
Rinse and interim spin2): yes  
Final spin: yes  
Without spin has been selected  
2) Rinse and interim spin:  
There is a spin between the rinses.  
Omitting rinse and interim spin:  
Select Without spin on the spin speed  
display.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
All modern detergents produced for  
automatic washing machines are  
suitable, including liquid, compact  
(concentrated), tablets, liquid tablets  
and special application detergents.  
Use dispensing aids, e.g. balls, if these  
are supplied with the detergent. Tablets  
are suitable for full loads but note that it  
may be impractical to reduce tablets by  
proportion to suit smaller loads!  
Woollens and knitwear containing wool  
mixtures and hand-washable garments  
should be washed using a detergent  
specifically designed for washing  
woollens.  
– The soiling level of the laundry.  
Lightly soiled  
No visible dirt or stains. Possibly  
slight body odour.  
Normally soiled  
Visibly dirty and/or just a few slight  
stains.  
Heavily soiled  
Stains and soiling clearly visible.  
– The water hardness level.  
Check with your local water supplier  
if you do not know the water  
hardness level in your area.  
Silk should be washed using a liquid  
detergent specifically designed for  
washing woollens. Do not use  
biological detergents on silk as the  
enzymes may damage the silk!  
Instructions for use and recommended  
amounts for a full load are given on the  
detergent packaging.  
Water softeners  
A water softener can be used to cut  
down on the use of detergents in  
extremely hard water areas. Dispense  
according to the amount specified on  
the packaging. First add detergent and  
then the water softener.  
Use a quantity of detergent as for soft  
water.  
Liquid detergent  
Miele do not recommend connecting  
the machine to a household water  
softener.  
Liquid detergent should be dispensed  
using a ball provided by the manufac-  
turer for programmes without a  
pre-wash.  
Washing with several  
components  
For programmes with a pre-wash you  
will need to purchase a special  
If you wash using several components  
(e.g. special application detergents),  
dispense them into compartment j in  
the following order:  
container from the Miele Spare Parts  
department which sits in the main wash  
compartment j of the detergent  
dispenser drawer. Add liquid detergent  
to this container for the main wash and  
to compartment i for the pre-wash.  
1. Detergent  
2. Water softener  
The right amount to dispense will  
depend on the following:  
3. Stain remover  
This way the agents are distributed  
more efficiently.  
– The quantity of laundry.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Detergent  
Fabric conditioners and liquid  
starch  
If starching frequently, the dispenser  
compartment and especially the  
siphon tube and conditioner channel  
will need regular cleaning to remove  
any residual starch. See "Cleaning  
the detergent dispenser drawer".  
Do not add starch formulations or  
viscous liquid starch to the §  
Fabric conditioners make garments soft  
and fluffy to handle and help prevent  
static cling when tumble drying.  
Starch stiffens and gives body to items  
of laundry, e.g. shirts, tablecloths and  
bed linen.  
compartment as it will clog it up. See  
"Adding starch separately".  
^ Dispense according to the amount  
specified on the packaging.  
Adding fabric conditioner separately  
Automatic dispensing of fabric  
conditioner or liquid starch to  
laundry at the end of a programme  
^ Add fabric conditioner to  
compartment §.  
^ Turn the programme selector to Starch.  
^ Select a spin speed.  
^ Press the Start button.  
Adding starch separately  
Use the separate Starch programme  
when using starch formulations or  
viscous liquid starch.  
^ Prepare and measure the starch in  
accordance with the manufacturer’s  
instructions.  
^ Add starch to compartment i.  
^ Turn the programme selector to Starch.  
^ Select a spin speed.  
^ Press the Start button.  
Colour run and dye  
removers/dyes  
^ Add the fabric conditioner or liquid  
starch to compartment §. Do not  
exceed the maximum level mark.  
^ Do not use colour run or dye  
removers in this washing machine.  
^ Dyes suitable for use in domestic  
washing machines can be used.  
However, please note that the salt  
used in the dyeing process can  
cause corrosion to stainless steel  
components in the machine if you  
dye frequently. Always observe the  
manufacturer's instructions carefully.  
The conditioner or liquid starch is  
automatically dispensed in the last  
rinse. At the end of the programme a  
small amount of water remains in the  
fabric conditioner compartment §.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Cleaning and care  
Extra cleaning  
,Disconnect the appliance from  
the mains electricity supply and  
withdraw the plug from the socket  
prior to cleaning the machine.  
Carry out a hot wash (70°C or above)  
with powder detergent approx. every 6  
weeks to help prevent deposits building  
up in the machine. These can occur  
when washing is mainly done at low  
temperatures, and also lead to  
unpleasant smells. If you have no  
reason to wash occasionally at this high  
temperature, then run a Cottons 95°C  
programme with detergent but no  
laundry at regular intervals.  
^ Clean the casing with a mild  
non-abrasive detergent or soap and  
water. Wipe dry with a soft cloth.  
^ Clean the fascia panel with a damp  
cloth and wipe dry with a soft cloth.  
^ The drum can be cleaned using a  
suitable proprietary stainless-steel  
cleaning agent.  
,Do not use solvents, abrasive  
cleaners, glass cleaners or  
all-purpose cleaning agents. These  
might damage plastic surfaces and  
other components because of the  
chemicals they contain.  
The washing machine must not be  
hosed down.  
E-Cloth  
A microfibre "E-Cloth" is available from  
the Miele UK Spare Parts Department,  
Part number 98013530, which is  
suitable for cleaning surfaces such as  
stainless steel, glass, plastic and  
chrome without the use of chemicals. It  
can be washed 300 times.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Cleaning and care  
Cleaning the detergent dispenser  
drawer  
Remove detergent residues regularly.  
^ Clean the siphon.  
1. Remove the siphon from  
compartment §. Wash under  
running warm water. Clean the  
siphon tube in the same way.  
^ Pull out the detergent dispenser  
drawer until a resistance is felt. Press  
down the release catch and at the  
same time pull the drawer right out of  
the machine.  
2. Replace the siphon.  
Over time, detergent residue can build  
up in the water jets in the top of the  
detergent drawer housing.  
^ Clean the detergent drawer with  
warm water.  
^ Before replacing the detergent  
drawer, use a bottle brush or similar  
to clean them out.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Cleaning and care  
Cleaning the fluff (drain) filter  
and pump  
Check the fluff filter initially after 3-4  
washes to ascertain how often it is likely  
to require cleaning.  
With normal cleaning approx. 2 litres of  
water run out.  
If the drain outlet is blocked, up to  
25 litres of water will be retained in the  
machine.  
,Caution: if laundry has been  
washed at a high temperature, water  
draining out of the machine will still  
be hot. Danger of scalding!  
^ Use it to open the access flap.  
Procedure for draining the machine  
^ Place a suitable container under the  
access flap.  
There is a filter flap opener located  
behind the detergent drawer fascia  
panel (see illustration).  
When draining water from the  
machine, do not unscrew the fluff  
filter completely or take it right out.  
^ Remove the opener.  
^ Unscrew the fluff filter lid until water  
runs out.  
To stop the flow of water:  
^ Tighten the fluff filter back up again.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Cleaning and care  
Once the flow of water ceases:  
^ Clean the inside of the fluff filter  
housing. Remove any deposits of  
limescale and detergent or foreign  
objects from the thread of the filter  
housing and filter unit (as these  
objects can cause a leakage of wa-  
ter). Deposits of limescale are often a  
sign of underdosage of powder.  
^ Put the fluff filter back in place and  
secure.  
,Make sure the fluff filter is  
securely tightened. Otherwise there  
is a risk of water leakage during use.  
^ Remove the fluff filter completely.  
After cleaning  
^ Clean the fluff filter thoroughly.  
^ Pour approx. 2 litres of water into the  
detergent dispenser compartment  
j to reactivate the ball valve.  
^ Remove any foreign objects (e.g.  
buttons, coins, etc) and fluff. Turn the  
impeller by hand to check that it is  
free to rotate. Any foreign object  
causing an obstruction should be  
removed.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the water inlet filters  
To clean the filter in the water inlet  
valve  
The washing machine has two filters to  
protect the inlet valves.  
^ Using pliers, carefully loosen the  
ribbed plastic nut on the inlet valve  
and unscrew.  
These filters should be checked every  
six months or so, or more often if there  
are frequent interruptions to the water  
supply.  
To clean the filter in the union in the  
open end of the inlet hose:  
^ First turn off the stopcock.  
^ Unscrew the threaded union  
connecting the free end of the inlet  
hose to the stopcock.  
^ Use water pump pliers to withdraw  
the plastic filter by the bar (see  
illustration). Clean, put back and  
secure.  
The two filters must be put back in  
place after cleaning.  
^ Remove the rubber seal 1 from the  
recess.  
^ Using pointed pliers, take hold of the  
plastic filter bar 2, remove the filter  
and clean.  
^ Put the filter and seal back in the  
reverse order and reconnect the  
hose.  
^ Turn on the stopcock and check the  
connection is watertight. If it leaks,  
tighten the connection.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Problem solving guide  
With the help of the following notes minor faults in the performance of the  
appliance, some of which may result from incorrect operation, can be put right  
without contacting the Service Department.  
,Repair work to electrical appliances should only be carried out by a  
suitably qualified person in accordance with local and national safety  
regulations. Unauthorised repairs could be dangerous.  
The chart is divided into the following sections to help you:  
– The programme does not start.  
– The wash programme stops and a fault indicator light comes on.  
– A fault indicator light comes on but the wash programme continues as normal.  
– General problems or an unsatisfactory wash result.  
– The drum door does not open when you press the Door button.  
The programme does not start.  
Fault indicator  
Possible cause  
Remedy  
Check that  
the mains plug is  
The Anti-crease/Finish There is no power.  
indicator light is not on,  
or the Start indicator  
plugged in.  
light is not flashing.  
the fuse or circuit  
breaker has not  
tripped.  
The programme does  
not start when  
Drain/Final spin has  
been selected.  
The washing machine has Prepare the machine as  
not been prepared for  
using for the first time.  
described in "Before  
using for the first time".  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Problem solving guide  
The wash programme stops and a fault indicator light comes  
on.  
Fault indicator  
Possible cause  
Remedy A  
The Check drain light  
flashes.  
The water outlet is  
blocked.  
Clean the fluff (drain)  
filter and drain pump.  
The drain hose has been The maximum drain  
fixed too high. height is 1 m.  
The Check inlet light  
The water inlet is blocked. Open the stopcock.  
flashes.  
The filter in the water inlet Clean the filter.  
hose is dirty.  
The Check inlet and  
Check drain lights flash. system has reacted.  
The water protection  
Call the Service  
Department.  
The Soak/Pre-wash or  
Rinses indicator light  
flashes in the  
There is a fault.  
Start the programme  
again.  
If the fault indicators  
occur again, contact the  
Service Department.  
programme sequence.  
ATo switch off the fault indicator: Switch off the machine with the I-On/0-Off button  
and turn the programme selector to Finish  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Problem solving guide  
A fault indicator light comes on but the wash programme con-  
tinues as normal.  
Fault indicator  
Possible cause  
Remedy A  
The Check drain light  
flashes.  
The drain outlet is  
restricted.  
Clean the fluff (drain) filter  
and drain pump.  
The Check inlet light  
flashes.  
The water inlet is  
restricted.  
Check whether  
the stopcock is opened  
wide enough.  
the inlet hose is kinked.  
The filter in the inlet  
hose is dirty.  
Clean the filter.  
The Excess detergent  
check light comes on.  
Excessive foam has  
built up during  
washing.  
Use less detergent next  
time and follow the  
recommendation on the  
packaging.  
The Main wash indicator There is a fault.  
light flashes in the  
programme sequence  
display.  
Start the programme again.  
If the fault indicator occurs  
again, contact the Service  
Dept.  
The Anti-crease/Finish  
The position of the programme selector was altered  
indicator light flashes in after the start of the programme. Turn the  
the programme  
sequence display.  
programme selector back to the programme  
previously chosen.  
ATo switch off the fault indicator: Switch off the machine with the I-On/0-Off button  
and turn the programme selector to Finish  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Problem solving guide  
General problems or an unsatisfactory wash result  
Problem  
Possible cause  
Remedy  
The machine shakes  
during the spin cycle. resting evenly on the  
The four feet are not  
Level the machine. See  
advice on installation.  
floor.  
The laundry has not  
been spun  
The spin speed selected Select a higher spin speed  
was too low. next time.  
satisfactorily.  
The pump makes  
strange noises.  
These do not indicate a fault. They occur at the end of  
a pump sequence as a normal part of the operation.  
Large residues of  
The water supply  
Clean the filter in the wa-  
detergent remain in  
the dispenser drawer.  
pressure is too low.  
ter inlet system.  
It may be useful to press  
the Water plus button.  
Washing powder used  
with water softener  
Pour washing powder into  
the dispenser before adding  
tends to become sticky. any water softener.  
The siphon is either Clean the siphon, see  
incorrectly positioned or "Cleaning and care -  
Fabric conditioner is  
not completely  
dispensed or too  
much water remains in  
the § compartment.  
clogged.  
Cleaning the detergent  
drawer".  
When laundry is dry it Too vigorous wash  
Programme in gentle action  
and more water.  
feels hard to the  
touch.  
action.  
Not enough detergent  
used.  
Increase detergent dose to  
prevent limescale build up  
in laundry.  
No fabric conditioner  
used.  
Use fabric conditioner in last  
rinse.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Problem solving guide  
Problem  
Possible cause  
Remedy  
Liquid detergent Liquid detergents do Use a general purpose washing  
does not give the not contain bleaching  
machine powder containing a  
bleaching agent.  
Pour stain removers into compart-  
ment j of the dispenser drawer  
and liquid detergent into a  
dispenser ball.  
required result.  
agents. They do not  
remove fruit, coffee  
and tea stains.  
Never put stain removers and  
liquid detergent together in the  
dispenser drawer.  
Grey, greasy  
Insufficient amounts of Add more detergent.  
particles cling to detergent were used  
washed laundry. to break down the  
particles of grease in  
Before washing the next load run  
a Cottons 95°C programme with  
powder detergent but without a  
load.  
heavily soiled laundry.  
A stale smell is  
in the drum and washing.  
Low temperature  
Before washing the next load run a  
Cottons 95°C programme with  
on laundry.  
powder detergent but without a load.  
There are white The detergent  
Try and brush off the residues with  
a soft brush once the laundry is  
dry.  
residues which  
contained compounds  
look like powder (zeolites) to aid water  
detergent on  
dark coloured  
laundry.  
softening which are  
not soluble in water.  
These have ended up  
on the laundry.  
Use a liquid detergent to wash  
dark coloured textiles. Liquid  
detergents usually contain no  
zeolites.  
Machine is  
Machine connected to Connect machine to mains water  
constantly over- a water softener.  
and dose detergent for hard water.  
foaming/excess  
detergent light is  
on.  
Too much detergent  
was used.  
Reduce detergent.  
Too little detergent  
was used.  
Increase detergent slightly to bring  
back foam suppressant ingredients.  
Clothes are  
coming out  
creased.  
Programme was  
overloaded.  
Reduce quantity of clothes in drum.  
The wrong  
Check care labels with section  
programme was used.  
"How to wash correctly".  
Use easy iron conditioners.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
The drum door does not open when you press the Door button.  
Problem  
Remedy  
The machine is not  
connected to the  
electricity supply.  
Put the plug in the socket and switch on.  
The washing machine is Switch the machine on with the I-On/0-Off button.  
not switched on.  
Power cut.  
Open the drum door as described in the section  
"Opening the door in the event of a power failure".  
The door was not  
correctly engaged.  
Press hard against the lock side of the drum door  
and then press the Door button.  
There is still water in the Clean the fluff (drain) filter and the drain pump.  
drum and the machine is  
unable to drain.  
For safety reasons the drum door cannot be opened if the suds temperature is  
higher than 55°C.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Problem solving guide  
Opening the drum door in the  
event of a power failure  
^ Drain the water as described in the  
"Cleaning the fluff filter and pump"  
section of "Cleaning and care".  
^ Switch the washing machine off.  
,Always make sure that the drum  
is stationary before reaching into the  
machine to remove laundry.  
There is a lever behind the detergent  
drawer facia panel.  
Reaching into a moving drum is  
extremely dangerous.  
^ Remove the lever.  
^ Pull the emergency release  
downwards (see illustration). The  
drum door will open.  
^ Use it to open the access flap.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Problem solving guide  
Customer contact  
Please note that telephone calls may  
be monitored and recorded to  
improve our service.  
In the event of any faults which you  
cannot remedy yourself please contact  
– Your Miele dealer or  
– Your nearest Miele Service  
Department (see back cover for the  
address).  
When contacting the Service  
Department, please quote the model  
and serial number of your appliance,  
both of which are shown on the data  
plate visible at the top inside of the  
door above the porthole glass when the  
door is open.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
Front view  
aInlet hose (tested to withstand  
hDetergent dispenser drawer  
pressure of at least 7,000 kPa)  
iDrum door  
bElectricity supply cable  
jFlap for fluff filter, drain pump and  
c - f Flexible drain hose (with  
emergency release  
detachable swivel elbow)  
kHandle recesses for moving the  
gFascia panel with controls  
machine  
lFour height adjustable feet  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
Rear view  
aProtruding lid edge for holding when  
eTransit bar covers  
fRestraining clip for:  
– Inlet hose  
moving the machine  
bElectricity supply cable  
cInlet hose (tested to withstand  
– Drain hose  
pressure of at least 7,000 kPa)  
– Electricity supply cable  
– Transit bars when removed  
dDrain hose  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
Installation surface  
Installing the washing machine  
A concrete floor is the most suitable  
installation surface for a washing  
machine, being far less prone to  
vibration during the spin cycle than  
wooden floorboards or a carpeted  
surface.  
To manoeuvre the machine out of its  
packing case to its installation site hold  
it by the edge of the lid where it  
protrudes to the rear of the washing  
machine as well as by the handle  
recesses at the front.  
Please note the following points:  
Please note:  
^ The machine must be level and  
securely positioned.  
^ Do not lift the machine by the drum  
door.  
^ To avoid vibrations during spinning,  
the machine should not be installed  
on soft floor coverings.  
,Ensure that the machine feet and  
the floor are dry to prevent the  
machine from slipping during the  
spin cycle.  
If installing on a wooden joist floor:  
^ We recommend a plywood base  
(at least 59x52x3 cm). The base  
should span several joists and be  
bolted to the joists and not only to the  
floorboards. Check for the presence  
of pipes and cables.  
Removing the transit fittings  
If possible, install the machine in a  
corner, as this is usually the most stable  
part of the floor.  
,If the machine is installed on a  
raised plinth, it has to be secured  
against slippage during spin using  
retaining clips (available from the  
Miele Spare Parts Dept).  
^ To remove the left and right covers  
1. Use a screwdriver to prise out the  
cover as illustrated.  
2. Pull the cover forwards to remove.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
^ Using the spanner supplied turn the  
left-hand transit bar 90°, then  
^ Turn the right-hand transit bar 90°,  
then  
^ withdraw the transit bar.  
^ withdraw the transit bar.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
,The washing machine must not  
be moved without the transit bars in  
place.  
Store the transit bars as shown or  
keep them in a safe place for future  
use. They must be re-fitted if the  
machine is to be moved again  
(e.g.when moving house).  
Re-fitting the transit bars  
Re-fitting is carried out by reversing the  
procedure.  
^ Fit the covers on to the two holes.  
Then plug the holes as shown with  
the caps.  
^ Secure the transit bars to the back of  
the washing machine. Make sure that  
holes b are fitted over retainers a.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
Levelling the machine  
The machine must stand perfectly level  
on all four feet to ensure safe and  
proper operation.  
^ Using the spanner supplied turn  
counter nut 2 in a clockwise  
direction. Then turn counter nut 2  
together with foot 1 to unscrew.  
^ Use a spirit level to check the  
machine is standing level.  
Incorrect installation may increase  
electricity and water consumption and  
may cause the machine to move about.  
^ Hold foot 1 securely with a pipe  
wrench. Turn counter nut 2 again  
using the spanner supplied until it  
sits firmly up against the housing.  
Screwing out and adjusting the feet  
The four adjustable screw feet are used  
to level the machine. All four feet are  
screwed in when the machine is  
delivered.  
,All four counternuts must be  
firmly up against the housing. Please  
also check this for the feet which did  
not need adjustment. Otherwise  
there is the danger of the machine  
moving about.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
Building under a continuous  
worktop/in a kitchen run  
Washer and Dryer stack  
A Miele tumble dryer can be stacked  
with the washing machine. A stacking  
kit* is necessary and can be purchased  
– A special building under conversion  
kit* is required.  
The machine lid must be replaced by from the Miele Spare Parts Department.  
a cover plate. To ensure electrical  
safety the cover plate must be fitted.  
Please note  
N.B.  
If you wish to push your machine under  
a worktop and there is space to do this  
without removing the lid, the  
conversion kit is not necessary.  
Otherwise the conversion kit is  
essential.  
– For installation under a work surface  
900/910 mm from the floor, a raising  
kit* is required.  
– Connections for electricity, water and  
drainage should be installed in such  
a way that they remain accessible  
when the machine is in place.  
Fitting instructions are supplied with the  
conversion kit.  
a Safety distance to wall:  
at least 2 cm  
All parts marked* are available from the  
Miele Spare Parts or Sales Department.  
b Height:  
Stacking kit with pull-out shelf:  
approx. 169 cm  
Stacking kit without pull-out shelf:  
approx. 170 cm  
The fitting of building under kits and  
stacking kits must only be  
undertaken by qualified and  
competent persons, in accordance  
with the instructions supplied with  
the kit.  
Replacing the lid  
If the lid has been removed in order to  
fit a stacking kit or cover plate, ensure  
that, if the lid is replaced, it fits securely  
into the rear holders. Otherwise, it is not  
properly secure for transport.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
The Miele water protection  
system  
– Overflow protection  
This prevents the washing machine  
taking in too much water. If the water  
level exceeds a certain level, the  
drain pump switches in and pumps  
the excess water away.  
The Miele water protection system  
protects the washing machine from  
water damage.  
The system consists of three main  
components:  
3) Drain hose  
1) the inlet hose  
The drain hose is protected by a  
ventilation system which prevents the  
washing machine from being  
emptied completely.  
2) the electronic unit and the washing  
machine housing  
3) the drain hose  
1) Inlet hose  
The inlet hose can withstand pressure  
of more than 7,000 kPa.  
2) Electronic unit and washing  
machine housing  
– Sump  
Any leaking water is collected in a  
sump in the base of the appliance. A  
float switches off the safety valves,  
preventing any more water flowing  
into the machine and water in the  
suds container is pumped away.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
Connection to the water supply  
In order to protect the water inlet  
valve, the two dirt filters - one in the  
open end of the inlet hose, one at  
the inlet point in the machine must  
not be removed.  
The machine should be connected to a  
mains water supply in accordance with  
local and national safety regulations.  
The German authorities do not require it  
to have a non-return valve as the  
washing machine has been designed  
to comply with DIN regulations.  
Extension hose  
– Longer hoses 2.5 or 4.0 m in length  
are available from your Miele dealer  
or the Miele Spare Parts Department  
as optional extras.  
The machine is designed to operate  
with a flow pressure of between  
100 kPa and 1,000 kPa. If it is higher  
than 1,000 kPa it is essential to fit a  
reducer valve.  
Connection to the mains water supply  
should incorporate a mains stopcock  
with 3/4" thread. The stopcock should  
be fitted by a qualified plumber.  
,The connection point is subject  
to mains water pressure. Turn on the  
stopcock slowly and check for leaks.  
Correct the position of the washer  
and union if appropriate.  
The washing machine is not suitable  
for connection to a hot water supply  
and connection to a household wa-  
ter softener is not recommended.  
Maintenance and care  
Only use a genuine Miele hose should  
you ever need a replacement or  
extension. These are tested to  
withstand pressure of at least  
7,000 kPa.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
Connection to the drainage  
system  
Drain hose connection:  
1. Direct into a sink or basin:  
Please note the following  
The machine drains via a drain pump  
with a delivery head of 1 metre*.  
– Hook the hose over the edge and  
secure.  
The drain hose must not be kinked as  
this restricts drainage. The swivel elbow  
at the end of the hose can be turned in  
either direction, or can be detached if  
required, with a sharp twist and pull.  
– Make sure that the water can drain  
away freely without hindrance.  
Otherwise there is a risk of water  
overflowing or of some of the drained  
water being sucked back into the  
machine.  
If required, the drain hose can be  
extended to a length of 5 m. The  
necessary parts can be purchased  
from the Miele Spare Parts Department  
or your Miele dealer.  
2. Connected securely to a plastic drain  
pipe with a rubber nipple. There is no  
need to use a non-return valve.  
* For a delivery head of more than 1 m  
(up to a maximum of 1.8 m) a second  
duo-drain pump is available with the  
corresponding kit from the Miele Spare  
Parts Department or your Miele Dealer.  
3. Connected securely to a standpipe.  
4. Connected securely to a floor gully.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
Electrical connection U.K.  
The wire which is coloured green and  
yellow must be connected to the  
terminal in the plug which is marked  
with the letter E or by the earth symbol  
z or coloured green, or green and  
yellow.  
All electrical work should be carried out  
only by a suitably qualified and  
competent person, in strict accordance  
with national and local safety  
regulations.  
The wire which is coloured blue must  
be connected to the terminal in the  
plug which is marked with the letter N  
or coloured black.  
The appliance is supplied with a mains  
cable with moulded plug for connection  
to a 230-240V mains supply. The  
voltage, rated load and fuse rating  
are given on the data plate. Please  
ensure these match the household  
mains supply.  
The wire which is coloured brown must  
be connected to the terminal in the  
plug which is marked with the letter L or  
coloured red.  
Connection should be made via a fused  
plug and suitable switched socket  
which is easily accessible after  
installation.  
WARNING: THIS APPLIANCE  
MUST BE EARTHED  
Ensure power is not supplied to the  
appliance while installation work is  
being carried out.  
For extra safety it is advisable to install  
a residual current device (RCD), with a  
trip current of 30 mA (in accordance  
with DIN VDE 0664, VDE 0100 Section  
739).  
Do not connect via an extension lead.  
Important  
The wires in the mains lead are  
coloured in accordance with the  
following code:  
Green/yellow = earth  
Blue  
= neutral  
= live  
Brown  
Where it is necessary to change plugs,  
if the colours of the wires in the mains  
lead of this appliance do not  
correspond with the coloured markings  
identifying the terminals of your plug,  
proceed as follows:  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and connection  
Non-rewireable plugs BS 1363  
If this machine is fitted with a  
non-rewireable plug, the following  
information applies:  
If the socket outlets are not suitable for  
the plug supplied with the product, it  
must be cut off and an appropriate plug  
fitted. The fuse carrier and fuse should  
be removed from the old plug and  
disposed of.  
The old plug should then be disposed  
of and on no account be inserted into  
any socket elsewhere in the house  
(electric shock hazard).  
The fuse cover must be refitted when  
changing the fuse, and if the fuse cover  
is lost, the plug must not be used until a  
suitable replacement is obtained. The  
colour of the correct replacement cover  
is that of the coloured insert in the base  
of the plug, or the colour that is  
embossed in words on the base of the  
plug (as applicable to the design of  
plug fitted).  
Replacement fuses should be ASTA  
approved to BS 1362 and have the  
correct rating. Replacement fuses and  
fuse covers may be purchased from  
your local electrical supplier or Service  
agent.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Consumption data  
Programme  
(without any additional  
options or  
Load  
Consumption data  
Energy  
Water  
Duration  
normal Short  
in kWh  
in litres  
programmable  
functions)  
Cottons  
95°C  
60°C1)  
5.0 kg  
5.0 kg  
5.0 kg  
1.70  
0.95  
0.50  
45  
45  
45  
1 h 47 min 1 h 32 min  
1 h 56 min 1 h 26 min  
1 h 56 min 1 h 26 min  
40°C  
Minimum iron  
40°C  
2.5 kg  
1.0 kg  
1.0 kg  
2.0 kg  
0.45  
0.35  
0.24  
0.23  
49  
65  
39  
35  
1 h 16 min 1 h 01 min  
Delicates  
30°C  
59 min  
37 min  
40 min  
49 min  
Silks /  
30°C  
Woollens /  
30°C  
1) EN 60456 test programme  
Consumption data can vary from the nominal values given depending on water  
pressure, water hardness, water inlet temperature, room temperature, type and  
volume of load, fluctuations in the electricity supply and any additional options  
selected.  
N.B.  
Consumption data obtained from a machine tested in Germany.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Technical data  
Height  
85.0 cm  
59.5 cm  
58.0 cm  
94.5 cm  
93 kg  
Width  
Depth  
Depth with door open  
Weight  
Maximum floor load  
Capacity  
1600 Newton (approx. 160 kg)  
5 kg dry laundry  
see data plate  
see data plate  
see data plate  
see "Consumption data"  
100 Pa (1 bar)  
1.000 Pa (10 bar)  
1.60 m  
Voltage  
Rated load  
Fuse rating  
Consumption data  
Water flow pressure min.  
Water flow pressure max.  
Inlet hose length  
Drain hose length  
Connection cable length  
Drain pump head max.  
Drain pump length max.  
Test certificates awarded  
1.50 m  
1.60 m  
1.00 m  
5.00 m  
Radio/TV suppression, VDE  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
for changing  
standard settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
The programmable functions can be  
used to tailor washing programmes to  
suit your individual requirements.  
The settings are as follows:  
Setting 1:  
an increase in the rinse water level for  
the programmes listed (except for  
Silks).  
The programmable functions are  
activated with the help of the Start  
button and the programme selector.  
Setting 2:  
an increase in the water level in the  
main wash and rinses for the  
programmes listed (the washing  
machine is delivered with setting 2  
programmed as standard).  
Water plus system  
Selecting the Water plus additional  
option increases the water intake in  
the programmes listed below.  
Setting 3:  
The water intake is increased in the  
wash and rinse stages and in the -  
Cottons programme an extra rinse  
cycle is introduced.  
an extra rinse cycle in the Cottons  
programme only.  
Setting 4:  
an increase in the water level in the  
main wash and rinses for the  
programmes listed and also an extra  
rinse cycle in the Cottons programme.  
This setting should be programmed in if  
laundry is too hard after drying and if  
someone in the household suffers from  
a detergent allergy.  
There are four different settings which  
can be programmed to alter the water  
intake for the following programmes:  
– Cottons  
– Minimum iron  
– Quick wash  
– Mixed wash  
– Silks  
Steps A to G on the following page  
describe how to programme and store  
a setting in memory.  
The programmed setting is then  
activated by pressing the Water plus  
additional option button.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Programmable functions  
Follow steps A to G to programme  
ETurn the programme selector to the  
and store a setting in memory.  
Cottons 75°C position:  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
The Soak/Pre-wash sequence  
indicator light will briefly flash twice in  
2 second intervals, to show that  
factory Setting 2 is stored in memory.  
FEach subsequent press on the Start  
button selects a different setting.  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
The Soak/Pre-wash sequence indicator  
light will flash:  
BSwitch the machine on with the  
x 1 = Setting 1  
I-On/0-Off button.  
higher rinse water level selected  
CWait until the Start indicator light  
x 2 = Setting 2  
comes on . . .  
higher water level in the main wash  
and rinses (factory setting)  
D. . . and then release the Start  
button.  
x 3 = Setting 3  
extra rinse in the Cottons programme  
x 4 = Setting 4  
higher water level in the main wash  
and rinses and an extra rinse in the  
Cottons programme  
GSwitch the washing machine off with  
the I-On/0-Off button.  
The Water plus button has now been  
allocated the setting you have chosen.  
This setting will remain in memory until  
another setting is programmed.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Gentle action  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
Activating gentle action reduces the  
drum action. Slightly soiled items are  
washed more gently. It should be  
activated for garments with a single  
bar under the care label and for  
articles which feel too hard after they  
have been dried.  
BSwitch the machine on with the  
I-On/0-Off button.  
CWait until the Start indicator light  
comes on . . .  
D. . . and then release the Start  
button.  
Gentle action can be used with the  
Cottons, Quick wash, Starch and Mixed  
wash programmes.  
ETurn the programme selector to the  
Cottons 60°C position:  
If "Gentle action" is programmed into  
the machine, every wash cycle in these  
programmes will be carried out with  
gentle action rhythm.  
If the Soak/Pre-wash sequence  
indicator light:  
does not flash = Gentle action  
has not been  
The washing machine is delivered with  
"Gentle action" de-activated.  
activated.  
flashes = Gentle action  
has been activated.  
Follow steps A to G to programme  
and store in memory.  
FPress the Start button to activate or  
deactivate the Gentle action option.  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
GSwitch the washing machine off with  
the I-On/0-Off button.  
The setting you have selected is now  
stored in memory and will remain so  
until you alter it.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Programmable functions  
Top-up rinse for Cottons  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
When this is activated, additional wa-  
ter flows into the drum at the end of  
the main wash and the suds are  
cooled down. Hot suds can damage  
plastic drainage pipes.  
BSwitch the machine on with the  
I-On/0-Off button.  
CWait until the Start indicator light  
comes on . . .  
Top-up rinse takes place when  
temperatures of 95°C and 75°C are  
selected.  
D. . . and then release the Start  
button.  
ETurn the programme selector to the  
Top-up rinse should be activated:  
Cottons 40°C position:  
– to prevent the danger of scalding if  
the drain hose is hooked over the  
edge of a sink or basin.  
If the Soak/Pre-wash sequence  
indicator light:  
does not flash = the Top-up rinse for  
Cottons has not  
– where the drainage pipes do not  
comply with DIN 1986.  
been activated.  
The washing machine is delivered with  
the Top-up rinse for Cottons  
deactivated.  
flashes  
= the Top-up rinse for  
Cottons has been  
activated.  
Follow steps A to G to programme  
and store in memory.  
FPress the Start button to activate or  
deactivate the Top-up rinse for  
Cottons option.  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
GSwitch the machine off with the  
I-On/0-Off button.  
The setting you have selected is now  
stored in memory and will remain so  
until you alter it.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Programmable functions  
Memory function  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
If an additional option(s) is selected  
for a programme, and / or the spin  
speed is altered, the machine stores  
these changes in memory at the start  
of a programme.  
BSwitch the machine on with the  
I-On/0-Off button.  
CWait until the Start indicator light  
comes on . . .  
When that particular programme is  
chosen again, the display will show the  
additional option(s) and / or spin speed  
which have been stored for that  
programme in the memory.  
D. . . and then release the Start  
button.  
ETurn the programme selector to the  
Cottons 30°C position:  
The washing machine is delivered with  
the memory function deactivated.  
If the Soak/Pre-wash sequence  
indicator light:  
does not flash = the Memory func-  
tion has not been  
Follow steps A to G to programme  
and store in memory.  
activated.  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
flashes  
= the Memory  
function is  
activated.  
FPress the Start button to activate or  
deactivate the Memory function  
option.  
GSwitch the machine off with the  
I-On/0-Off button.  
The setting you have selected is now  
stored in memory and will remain so  
until you alter it.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Programmable functions  
Soak  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
A length of time of between 30 minutes  
and 2 hours can be programmed in 30  
minute increments for the soak  
process.  
BSwitch the machine on with the  
I-On/0-Off button.  
If the soak button is pressed the  
selected soak time will be carried out  
for the period selected before the wash  
programme is run.  
CWait until the Start indicator light  
comes on . . .  
D. . . and then release the Start  
button.  
The machine is set as standard to a two  
hour soak time.  
ETurn the programme selector to the  
Minimum iron 60°C position:  
The Soak/Pre-wash sequence  
Follow steps A to G to programme  
indicator light will briefly flash once  
every 2 seconds, to show that a soak  
time of 2 hours is stored in memory.  
and store in memory.  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
FEach subsequent press on the Start  
button selects a different setting.  
If the Soak/Pre-wash sequence  
indicator light:  
flashes x 1 = the soak time is  
2 hours  
flashes x 2 = the soak time is  
1 hour 30 minutes  
flashes x 3 = the soak time is  
1 hour  
flashes x 4 = the soak time is  
30 minutes  
GSwitch the machine off with the  
I-On/0-Off button.  
The Soak button has now been  
allocated the setting you have chosen.  
This setting will remain in memory until  
another setting is programmed.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved/4403  
M.-Nr. 06 020 350 / 00  
This paper consists of cellulose which has been bleached without the use of chlorine.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Ventilation Hood DA3060 User Manual
Moxa Technologies Switch EDS 208 User Manual
MRV Communications Switch MR2228 S2C User Manual
NCT Group Microscope Magnifier 2000M User Manual
Nextar Digital Photo Frame N10W 402 User Manual
Niles Audio Stereo System ZR 4630s User Manual
Nokia Bluetooth Headset BH 504 User Manual
Nortel Networks Server NN44470 100 User Manual
Omega Speaker Systems Thermometer DFG81 User Manual
Outlaw Audio Portable Speaker LFM 1EX User Manual