Operating instructions
for Washing machine
W 2662 WPS
To avoid the risk of accidents or
damage to the machine it is
essential to read these instructions
before it is installed or used for the
first time.
G
M.-Nr. 06 068 860
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Caring for our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disposal of your old appliance or machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Description of the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Washing environmentally and economically. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Energy and water consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Choosing the correct Extra: Soak, Pre-wash, Intensive . . . . . . . . . . . . . . . . . . 13
When drying with a tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How to wash correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Soak. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Intensive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Final spin speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Rinse and interim spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
To omit the final spin (Rinse hold). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
To omit rinse and interim spin and the final spin . . . . . . . . . . . . . . . . . . . . . . . 20
Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Garment care label symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To cancel a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To interrupt a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To change a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 31
Electronic programme locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Automatic dispensing of fabric conditioner or liquid starch to laundry
at the end of a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Adding fabric conditioner separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Adding starch separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Colour run and dye removers / dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
E-Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Extra cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Cleaning the detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
What to do, if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
The programme does not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Problems with the load size indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
An unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
The drum door does not open when you press the Door button. . . . . . . . . . . . . . 43
Opening the drum door in the event of a blocked drain outlet and/or
power failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Opening the drum door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Changing the lamp for the drum lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Installing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Removing the transit fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Screwing out and adjusting the feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 54
Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
The Miele Waterproof system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Connection to the drainage system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Note for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Settings menu J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Language F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Suds cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Lock X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Temperature S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Buzzer O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Keypad tones P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Display contrast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Display brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Stand-by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
load) match the mains electricity
supply. If in any doubt, consult a
qualified electrician.
To avoid the risk of accidents and
damage to the machine please read
these instructions carefully before
using it for the first time. They
contain important information on its
safety, use and maintenance.
Keep these operating instructions in
a safe place and ensure that new
users are familiar with the content.
Pass them on to any future owner of
the machine.
The electrical safety of this
machine can only be guaranteed
when continuity is complete between
the machine and an effective earthing
system which complies with local and
national regulations. It is most important
that this basic safety requirement is
present and regularly tested and where
there is any doubt the household wiring
system should be inspected by a
qualified electrician.
Correct usage
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
Only use the washing machine to
wash items which are specified by
the manufacturer to be machine-wash-
able on the wash-care label, and tex-
tiles composed of hand-washable wool
or wool blend fabrics as well as satin,
lace, silk and other hand-washable
garments.
Any other applications may be danger-
ous. The manufacturer is not liable for
damage resulting from improper use or
operation.
Do not connect the machine to the
mains electricity supply by an
extension lead. Extension leads do not
guarantee the required safety of the
machine (e.g. danger of overheating).
The machine is built in accordance
with current safety requirements.
Unauthorised repairs could result in
unforeseen dangers for the user, for
which the manufacturer cannot accept
liability. Repairs should only be
undertaken by a Miele approved
technician.
This machine is not a toy! To avoid
the risk of injury do not allow
children to play on or near it or to
play with the controls. Supervise its
use by the elderly or infirm.
Ensure current is not supplied to the
appliance until after maintenance or
repair work has been carried out.
Technical safety
The machine is only completely
isolated from the electricity supply
when:
Before setting up the machine,
check it for any externally visible
damage. Do not install and use a
damaged machine.
– it is switched off at the wall socket
and the plug is withdrawn, or
Before connecting the machine,
ensure that the connection data on
the data plate (voltage and connected
– it is switched off at the mains, or
– the mains fuse is withdrawn.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
The Miele "Water protection
system" protects from water
damage provided the following
conditions have been met:
Do not install your washing
machine in rooms where
temperatures below freezing may
occur. Frozen hoses may burst under
pressure. The reliability of the electronic
control unit may be impaired at
temperatures below freezing point.
– the machine is correctly plumbed in
and connected to the electricity
supply.
Before using the machine for the
first time, check that the transit
fitting at the rear of the machine has
been removed (see section on
"Installation"). During spinning, a transit
fitting which is still in place may result in
damage to both the machine and
adjacent furniture or appliances.
– if a fault has been identified, the
machine must be examined by a
competent person before further use,
and repaired if necessary.
Faulty components must only be
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
machine be guaranteed.
Turn off the stopcock if the
machine is to be left for any length
of time (e.g. holiday), especially if there
is no floor drain (gully) in the immediate
vicinity.
If the connection cable is faulty it
must only be replaced by a Miele
approved service technician to protect
the user from danger.
Flooding danger
In countries where there are areas
If hooking the drain hose into a
which may be subject to infestation wash basin, check that the water can
by cockroaches or other vermin, pay
particular attention to keeping the
machine and its surroundings in a
clean condition at all times. Any
damage which may be caused by
drain off quickly enough to prevent the
sink from overflowing.
Make sure the drain hose is secure, so
that the force of the water flowing out of
the hose does not dislodge it.
cockroaches or other vermin will not be Otherwise this will result in flooding.
covered by the machine guarantee.
Take care to ensure that foreign
objects (e.g. nails, pins, coins,
paper clips) do not find their way into
Use
the machine with the laundry. These
may damage components of the
machine (e.g. suds container, drum),
which in turn can result in damage to
the laundry.
This equipment may only be used
in mobile installations such as
ships, caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
If the correct amount of detergent
is dispensed, the machine should
not need to be descaled. If, however,
you do wish to descale the machine
only use proprietary non-corrosive
descaling agents and strictly observe
the instructions on the packaging. If in
doubt, contact the Miele Customer Ser-
vice Dept. or your Miele Dealer.
Safety with children
This machine is not a toy! To avoid
the risk of injury do not allow
children to play on or near it or to play
with the controls. Supervise its use by
the elderly or infirm, and supervise
children whilst you are operating the
machine.
For machines with a ‘porthole’
door, remember that the porthole
glass will be hot when washing at very
high temperatures. Do not let children
touch it.
Textiles which have been pre-
treated in solvent based cleaning
agents must be thoroughly rinsed in
clean water before being washed in the
machine.
Never use solvent based cleaning
agents in this machine, as this may
result in damage to component parts
and create toxic fumes. Such
detergents also pose a fire and
explosion hazard.
Accessories
Accessory parts may only be fitted
when expressly approved by Miele.
If other parts are used, guarantee,
performance and product liability
claims will be invalidated.
Only use dyes specified by the
manufacturer as being suitable for
use in a domestic washing machine.
Always observe the manufacturer's
instructions carefully.
Disposal of your old machine
Before discarding an old machine,
switch it off at the wall socket and
unplug it. Render the plug useless. Cut
off the cable directly behind the
appliance to prevent misuse. This
should be done by a competent
person.
Colour run and dye removers
contain sulphur compounds which
can cause damage such as corrosion.
Do not use these products in this
machine.
The manufacturer cannot be held
liable for damage caused by non-
compliance with these Warning and
Safety instructions.
Always make sure the drum is
stationary before reaching in to
remove washing. Reaching into a
moving drum is extremely dangerous.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the machine
Control panel
aStart/Stop button T
eExtras buttons with indicator lights
Various Extras (options) can be
For starting the programme selected
and cancelling a programme once it
has started.
added to the washing programmes.
fProgramme selector
bDisplay with – , OK, + and Load/
Detergent buttons
For selecting the wash programme
and temperature for that programme.
The programme selector can be
turned clockwise or anti-clockwise.
See the following page for more
details.
cm button
gI-On/0-Off button
For switching the washing machine
on or off.
For selecting delay start.
dPC / Optical interface
This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
hDoor button
Opens the machine door.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the machine
Display
When a programme is selected, the
display is used to select:
– the final spin speed
– the temperature for special
programmes
– the soak time
– delay start
– special programmes
The display shows:
– the duration of the wash programme
– the current time of day.
– button
For decreasing the values shown in the
display.
The Settings J menu is also operated
via the display.
+ button
For increasing the values shown in the
display.
OK button
For confirming the value selected and
choosing the next value.
Load, Detergent button
For calling up the load size and the
detergent amount.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
The washing machine will remind you to
remove the transport struts.
Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the fluff filter is securely
tightened to prevent the risk of water
leaks during use.
Remove transport
i
struts
OK
^ Remove the transport struts if they
have not been removed already.
Then confirm this with OK.
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
amount of detergent required. To allow
the load size indicator to function
correctly, you must first run a wash
programme without any laundry and
without detergent. The sensor must also
be calibrated to zero as you would with
bathroom scales.
The display for setting the clock will
appear.
12 : 00
Set time of day
^ Set the hour with the – and + buttons
and confirm your setting by pressing
the OK button. Now set the minutes.
After you have confirmed the minute
setting, the display will change to
show the entry menu.
^ Open the stopcock.
^ Press the I-On/0-Off button in.
When the washing machine is switched
on for the first time, the welcome screen
will appear.
15:00
Select programme
M
Welcome
^ Turn the programme selector to the
Cottons 60°C position.
The welcome screen will not appear
again once you have set the machine
up for first use as described in this
chapter, or once a programme lasting
longer than 1 hour has been
completed.
^ Press the Start/Stop T button.
At the end of the programme, the load
size sensor must be re-calibrated to
zero. See next page.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Calibrating to zero at the end of a
programme
^ Turn the programme selector to the
Stop position.
^ Open the drum door.
^ Switch the washing machine off.
^ Switch the machine back on again.
^ Turn the programme selector to the
Cottons 95°C position.
^ Press and hold the Load/Detergent
button until the following appears in
the display:
Zero setting
i
OK
The accuracy of the calibration
device will improve over the first few
programmes. At first it will drop a
little. For this reason, please re-
calibrate the sensor to zero after
each of the first few wash cycles.
^ Turn the programme selector to Stop
and switch off the washing machine.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing environmentally and economically
Energy and water consumption
Detergent
– Water consumption and energy
usage are determined by the size of
the load.
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
To make the most out of your
machine load the maximum dry load
for the programme you are using.
– Reduce the amount of detergent for
smaller loads. Use the Load/
Detergent button.
– Use the Automatic or the Quick
wash programmes for small loads.
Choosing the correct Extra:
Soak, Pre-wash, Intensive
– If smaller loads are washed using the
Cottons programmes, the automatic
load recognition system will reduce
the amount of water, time and energy
used. This may mean that the
programme duration is adjusted
during the course of the wash
programme.
Select:
A wash programme without any
Extras for light to normal soiling
where there are no obvious marks.
A wash programme with the
Intensive Extra for normal to heavily
soiled laundry with visible staining.
– Instead of using Cottons 95°C, use
Cottons 60°C and select the
Intensive Extra. This will give an
energy saving of between 35% and
45%. The programme duration will
be longer. This combination is
sufficient for most levels of soiling.
For stubborn or old stains, use the
Soak Extra.
– Use the Soak Extra instead of Pre-
wash. If Soak is followed immediately
by a main wash the same suds are
used.
When drying with a tumble dryer
– Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
Brief instructions
^ Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
The headings numbered A, B, C, . . .
show the operating sequence and can
be used as brief instructions.
Dark textiles often contain excess dye
and should be washed separately
several times before being included in
a mixed load. Always wash whites and
coloureds separately.
ASort the laundry
– Curtains: Remove lead weights first
or place in a laundry bag.
– Underwiring and collar stiffeners:
Any loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
– Knitted garments, trousers and
jeans, T-shirts and sweat shirts: Turn
inside out, if recommended by the
manufacturer.
^ Empty all pockets.
– Close any zips, fasten hooks and
eyes etc before washing.
,Foreign objects (e.g. nails,
coins, paper clips, etc.) can cause
damage to garments and
– Fasten duvet covers etc. to prevent
small items from being rolled up
inside them.
components in the machine.
^ Badly soiled areas, stains etc. should
be removed as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
Do not wash any items in this machine
which are specified by the
manufacturer as not washable on the
care label. (h symbol)
Badly soiled areas can be pre-treated
with liquid detergent, stain removers
etc. first, following the manufacturer's
instructions. With particularly stubborn
stains ask your dry cleaner for advice.
,Do not use solvent-based
cleaning agents in this machine.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
BSwitch on the washing machine
The following choice of programmes
will appear in the display when you turn
the programme selector to the Special
Programmes (Special Progs.) position.
CSelect a programme
C
E
OUTER WEAR
DENIM
SHIRTS
H
^ Use the – or + button to highlight the
programme you wish to select and
confirm your selection by pressing
the OK button.
The display will switch to show the
menu for the programme selected.
^ The wash programmes and
temperatures are selected with the
programme selector.
DENIM
40°C
900 RPM
The programme selected will appear in
the display.
Duration
1:00 h
^ You can then alter the temperature
which is shown highlighted with
the – or + buttons. Press the OK
button to confirm the temperature you
want and move on to the spin speed.
MINIMUM IRON
The display will switch to show the
menu for the programme selected.
40°C
900 RPM
Duration
0:50 h
^ You can then alter the spin speed
which is shown highlighted with the –
or + buttons.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
The display shows the amount of
laundry loaded in the drum as a % (in
25% steps) of the maximum load
permissible for the programme
selected.
^ Unfold the laundry and load loosely
in the drum. Mixing both large and
small items gives better wash results
and also helps distribute the load
evenly during spinning.
The most efficient use of energy and
water is achieved when a full load is
washed. Do not overload as this
causes creases and reduces cleaning
efficiency.
^ You can select any Extras (additional
options) with the Extras buttons.
^ Each press of the top button selects
the Extra in the following order: Pre-
wash or Soak or no selection.
Make sure that no garments are
caught between the drum door and
seal.
Not all the Extras are suitable for
selecting with every programme.
If an Extra which is incompatible with
the basic programme is chosen, it
cannot be selected.
DLoad the drum
^ Press the Door button to open the
drum door.
The interior drum lighting will come on.
The load size indicator display will
appear.
Load <25%
^ Shut the door with a firm swing.
B
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
EAdd detergent
– High water consumption (an
additional rinse cycle will
automatically switch in).
The load size indicator display will be
replaced with the detergent percentage
display.
– A burden to the environment.
Detergent 75%
A
40%
Add slightly less than half the
amount recommended . . .
50%
Add half the amount
recommended . . .
60%
Add slightly more than half the
amount recommended . . .
75%
Add three quarters of the
amount recommended . . .
^ Pull out the detergent drawer and
add detergent to the compartments
as follows:
100%
Add the full amount
You also need to take the level of
soiling and water hardness into
account.
i
Detergent for the pre-wash (1/4 of the
total amount recommended).
This compartment is also used for
starch formulations when starching
separately.
too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
j
– Greasy particles clinging to the
laundry.
Detergent for the main wash
including Soak
– Limescale deposits on the heater
elements.
§
Fabric conditioner or liquid starch
^ Close the detergent drawer.
See "Detergent" for further information.
too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
FStart the programme
^ Press the flashing Start/Stop T
button.
The estimated programme duration will
appear in the display. This will count
down in one minute steps. During the
first 10 minutes the washing machine
measures how much water is being
absorbed by the laundry. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The washing
machine shows you when each section
of the programme is reached.
^ Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there.
^ Turn the programme selector to the
Stop position.
The drum lighting switches off once the
programme has started.
^ Switch the washing machine off with
the I-On/0-Off button.
GRemove the laundry
Anti-crease and Finish will flash
alternately in the display to indicate that
the programme has finished.
^ Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
^ Press the Door button to open the
drum door.
^ Remove the laundry.
Make sure that the drum is empty.
Items left in the drum could
discolour other items in the next
wash or become discoloured
themselves.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Extras
You can use the EXTRAS buttons to
augment the basic wash programmes.
Intensive
For normal to heavy soiling or where
staining is visible.
Pre-wash
For laundry with large amounts of dirt
(e.g. dust, sand).
The duration of the main wash is
increased.
Soak
Water plus
The machine is set at the factory so that
the water level in the main wash and
rinses will be increased if the Water
plus EXTRA is selected.
For heavily soiled and stained items
with protein stains (e.g. blood, fats
and oils, cocoa).
A length of time of between 30 minutes
and 6 hours can be chosen, in 30
minute periods for the “Soak” process.
However, you can select other settings
for Water plus. These are described in
"Settings menu J".
To select the soak time
Buzzer
^ Press the Pre-wash, Soak button until
the Soak indicator light comes on.
An audible tone sounds repeatedly at
the end of a programme or when Rinse
hold is reached.
You can now use the display to select
the soak time you require.
The buzzer will sound repeatedly until
the machine is switched off.
15:06
Once switched on, the buzzer is active
in all programmes until it is switched off
again.
Finish:
Soak:
17:04
0.30
h
Use the – and + buttons to enter the
soak time. The display will also show
the corresponding finishing time for the
washing programme. Press the OK
button to confirm the soak time you
want.
You can change the volume of the
buzzer or switch it off with the buzzer
button. These are described in
"Settings menu J".
The buzzer will always sound when
there is a fault, even if the buzzer has
been switched off.
To delete the soak time
^ Set the soak time to 0.00 h and
confirm this with the OK button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Spinning
Final spin speed
To omit the final spin (Rinse hold)
Wash programme
Cottons
rpm
1800
900
^ Select the Rinse hold setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
Minimum Iron
Delicates
Automatic
Quick wash
Woollens
600
900
1600
1200
400
– To start the final spin:
Silks
Denim
900
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop T button.
Shirts
600
Outer wear
Spin
800
1800
1200
1500
Separate rinse
Starch
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again, to open the door.
You can reduce the final spin speed.
You cannot select a final spin speed
higher than that shown in the chart
above.
To omit rinse and interim spin and
the final spin
Rinse and interim spin
^ Select the Without spin setting. The
laundry is not spun after the final
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in a
Cottons programme, an additional rinse
is introduced.
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional rinse
is introduced if this setting is selected
with the Cottons, Minimum iron, Auto-
matic and Quick wash programmes.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Delay start
With delay start you can choose when
you want the programme to end. The
start of a programme can be delayed
from 30 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
To begin delay start
^ Press the Start/Stop T button.
60°C
1800 RPM
START IN:
3:41 h
The display will show when the
programme will be started in hours and
minutes.
The current time of day needs to
have been set for delay start to work
correctly.
To alter delay start
To switch on delay start
^ Press the m button.
^ Select the programme you want and
then press the m button.
^ Use the + and – buttons to alter the
time you want the programme to end
at.
9:51
Start:
Finish:
9:51
11:19
^ Press the OK button to confirm the
time selected.
The display shows the current time of
day and the time the programme is due
to end.
To cancel delay start
^ Press the m button.
^ Use the + button to select the time
you want the programme to end at.
^ Use the – button to bring the end
time of the programme forward until it
is the same as the current time of
day.
9:51
Start:
Finish:
13:32
15:00
^ Press the OK button to confirm.
The programme will now start immedi-
ately.
The first press on the button will adjust
the programme end time to the next full
or half hour. Each subsequent press on
the button will delay the programme
end time by 30 minutes.
The actual load size can only be
determined accurately by the
machine once the programme has
started. The programme end time
may, therefore, be a bit later or
earlier than first indicated.
Use the – button to shorten the time if
you have chosen too long a time.
^ Confirm the programme end time by
pressing the OK button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Cottons 30°C to 95°C
9ö8E76
Fabric type Cottons and linen fabrics, e.g. bed linen, table linen, towelling,
jeans, underwear, T-shirts, nappies.
Notes
– Only use the Cottons 95°C programme for heavily soiled
laundry.
– For heavy soiling or where staining is visible, select Intensive.
– For laundry with stubborn soiling and/or soiling which has been
left unwshed for some time, select Soak.
– For laundry with large amounts of dirt (e.g. dust, sand), select
Pre-wash.
– For dark coloured fabrics use a detergent for coloured fabrics,
or liquid detergent.
Extras
Pre-wash, Soak, Intensive, Water plus
Detergent
Powder detergent, detergent for coloured fabrics, liquid
detergent, tablet detergent and liquid tab detergent.
Max. load
5.0 kg
Note for test institutes:
For testing in accordance with EN 60456 you must select the Intensive Extra.
Minimum iron 30°C to 60°C
8764321
Fabric type For garments made of synthetic fibres, mixed fibres and for easy
care cotton shirts and blouses. If fabrics have a high proportion of
man-made fibres it is advisable to programme the machine for
"Gentle action". See "Settings menu J".
Notes
For heavy soiling or where staining is visible, select Intensive.
Pre-wash, Soak, Intensive, Water plus
Extras
Detergent
Powder detergent, detergent for coloured fabrics, liquid
detergent, detergent for delicates, tablet detergent and liquid tab
detergent
Max. load
2.5 kg
Note for test institutes:
For testing in accordance with EN 60456 you must select the Intensive Extra.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Special programmes
Denim cold to 40°C
Fabric
Notes
Denim fabrics, e.g. jeans, skirts, shirts.
– Wash dark garments inside out.
– Denim often contains excess dye and will run during the first
few washes. Wash light and dark coloured items separately.
Detergent
Max. load
Detergent for coloured fabrics, liquid detergent, detergent for
delicates
2.0 kg
Outer wear cold to 40°C
Fabric
Outer wear made from micro-fibres such as Gore-Tex®,
SYMPATEX®, WINDSTOPPER® etc.
Notes
– Zip up jackets before washing.
– Do not use fabric conditioner.
Detergent
Max. load
Follow manufacturer's instructions regarding detergent on the
garment care label.
2.0 kg
Shirts cold to 60°C
Fabric
Notes
Shirts and blouses
– Pre-treat colours and cuffs if necessary.
– Wash silk blouses in the Silks programme.
Detergent
Powder detergent, detergent for coloured fabrics, liquid
detergent, tablet detergent and liquid tab detergent
Max. load
Starch
Fabric
1.5 kg
Table cloths, napkins, overalls, aprons.
Notes
The laundry should be washed but not treated with fabric
conditioner.
Max. load
5.0 kg
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Delicates cold to 40°C
21
Fabric type For delicate garments made of synthetic fibres, mixed fibres and
easy care cotton shirts and blouses.
Curtains, including net curtains, specified machine-washable by
the manufacturer.
Notes
– For heavy soiling where staining is visible, select Intensive.
– For curtains which crease easily, reduce the spin speed or
select Without spin.
Extras
Pre-wash, Soak, Intensive
Liquid detergent for delicates.
1 kg
Detergent
Max. load
Silks /
c
Fabric type Hand-washable fabrics with no wool content, e.g. satin, lace and
silk.
Notes
Place socks, tights, bras etc. in a washing bag.
Extra
Water plus
Detergent
Max. load
Liquid detergent for delicates.
2.0 kg
Woollens / cold to 40°C
ac
Fabric type Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature wash using the
cold setting.
Detergent
Max. load
Liquid detergent for machine-washable woollens.
2.0 kg
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Automatic 40°C
2
Fabric type Mixed loads of garments suitable for the Cottons and Minimum
iron programmes. Sort according to colour.
Notes
For heavy soiling or where staining is visible, select Intensive.
Pre-wash, Soak, Intensive, Water plus
Extras
Detergent
Max. load
Powder detergent, detergent for coloured fabrics, liquid detergent
3 kg
Quick wash 40°C
7
Fabric type Very lightly soiled fabrics which can be washed in a Cottons
programme.
Extra
Water plus
Detergent
Powder detergent, detergent for coloured fabrics, liquid
detergent.
Max. load
2.5 kg
Separate rinse
Fabric type Articles which have been washed by hand and only need to be
rinsed and spun in the machine.
Max. load
5.0 kg
Drain / Spin
For spinning fabrics. Please make sure you select the appropriate spin speed.
Drain only: Select Without spin.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Garment care label symbols
/
Hand wash (If no temperature
is specified use the lowest
temperature or cold)
h
Do not wash
apf Dry clean
D
y
Do not dry clean
Suitable for chlorine
bleaching
z
Do not use chlorine bleach
Tumble dry
q
r
s
At normal temperature
At low temperature
Do not tumble dry
Ironing
I
H
G
J
Hot iron
Medium hot iron
Cool iron
Do not iron
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
This washing machine has fully
electronic controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
Minimum iron
Main wash
Water level: low
Wash rhythm: normal
Rinses
Water level: high
No of rinses: 2 or 33)
Spinning
The programme sequences outlined
below are based on the basic
programme with a full load. Extras
which can be selected have not been
taken into account.
Rinse and interim spin2): yes
Final spin: yes
The programme sequence display
shows the stage the programme has
reached.
Delicates
Main wash
Water level: high
Wash rhythm: Gentle action
Rinses
Cottons
Main wash
Water level: low
Wash rhythm: normal
Rinses
Water level: high
No of rinses: 3
Spinning
Water level: medium
No of rinses: 2 or 31)
Spinning
Rinse and interim spin2): yes
Final spin: yes
Rinse and interim spin: no
Final spin: yes
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Woollens /
Automatic
Main wash
Main wash
Water level: medium
Wash rhythm: Woollens
Rinses
Water level: low
Wash rhythm: normal
Rinses
Water level: medium
No of rinses: 2
Spinning
Rinse and interim spin2): yes
Final spin: yes
Water level: high
No of rinses: 2
Spinning
Rinse and interim spin2): yes
Final spin: yes
Silks /
Separate rinse
Main wash
Water level: high
No of rinses: 2
Final spin: yes
Water level: medium
Wash rhythm: Silks
Rinses
Water level: medium
No of rinses: 2
Spinning
Rinse and interim spin: no
Final spin: yes
Quick wash
Main wash
Water level: low
Wash rhythm: normal
Rinses
Water level: medium
No of rinses: 2
Spinning
Rinse and interim spin2): yes
Final spin: yes
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Special programmes
Outer wear
Starch
Water level: low
No of rinses: 1
Final spin: yes
Main wash
Water level: medium
Wash rhythm: Gentle action
Rinses
Water level: high
No of rinses: 3
Spinning
Rinse and interim spin4): yes
Final spin: yes
Special features in the programme
sequences:
Anti-crease:
At the end of every programme, with
the exception of Woollens, the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
The door can be opened and laundry
removed at any time during the anti-
crease phase.
Denim
1) A third rinse is carried out if:
Main wash
Water level: medium
Wash rhythm: normal
Rinses
Water level: medium
No of rinses: 3
Spinning
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected.
– Without spin has been selected
2) Rinse and interim spin 1
Rinse and interim spin: no
Final spin: yes
There is a spin after the main wash and
between the rinses.
3) A third rinse is carried out if:
– Without spin has been selected
4) Rinse and interim spin 2
Shirts
Main wash
Water level: medium
Wash rhythm: normal
Rinses
There is a spin only after the main
wash.
Water level: medium
No of rinses: 2
Spinning
Rinse and interim spin2): yes
Final spin: yes
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
To cancel a programme
To change a programme
You can cancel a programme at any
time after it has started.
To change the programme or alter
the temperature
^ Press the Start/Stop T button.
After the start of a programme it is no
longer possible to select a different
programme.
The suds will be pumped away and the
programme is cancelled.
If you want to remove the laundry:
It is possible to alter the temperature up
to five minutes after the start of a
programme.
^ Press the Door button.
If you want to select a different
programme:
If you want to select another
programme or alter the temperature
(more than five minutes after the start of
a programme) you will need to cancel
the programme and begin again.
^ Switch the washing machine off with
the I-On/0-Off button.
^ Switch the machine back on again.
To change the spin speed:
To interrupt a programme
^ Press the OK button.
^ Switch the washing machine off with
The spin speed will be shown
highlighted. You can use the – and +
buttons to change the spin speed up
until the final spin begins.
the I-On/0-Off button.
To continue with the same programme:
^ Switch the machine on with the
I-On/0-Off button.
Changing EXTRAS
The buzzer can be switched on or off
after a programme has started.
It is possible to select or de-select the
Intensive and Water plus EXTRAS up to
five minutes after the start of a
programme.
Please note that changes are not
possible if programme locking has
been activated.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Adding or removing laundry
The door cannot be opened, if:
after a programme has started
– the suds temperature is above 55°C.
– the water is above a certain level.
Laundry can be added or removed
after the programme has started when
using the following programmes:
– the programme has reached the Spin
stage.
– Cottons
– the electronic programme locking
has been activated.
– Minimum iron
– Automatic
– Quick wash
– Starch
If you press the Door button when the
above conditions are present, the
following will appear in the display:
^ Press the Door button to open the
drum door.
X
Machine locked
^ Add or remove items.
^ Close the drum door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle for a full load.
This can alter the programme running
time shown in the display.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic programme locking
Programme locking prevents the
machine from being opened or the
programme cancelled or the
temperature or spin speed being
altered during a wash programme.
To activate programme locking
^ Once the programme has started,
press the Start/Stop T button for at
least 6 seconds until the following
appears in the display:
X
Machine locked
The machine will now not accept any
changes and the programme will
proceed through to the end.
Programme locking is deactivated
automatically at the end of the
programme.
To deactivate programme locking
^ Press the Start/Stop T button for at
least 6 seconds until the following
appears in the display:
W
Ready
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
All modern detergents produced for
automatic washing machines are
suitable, including liquid, compact
(concentrated), tablets, liquid tablets
and special application detergents.
Use dispensing aids, e.g. balls, if these
are supplied with the detergent. Tablets
are suitable for full loads but note that it
may be impractical to reduce tablets for
smaller loads. Some tablets do not
dissolve as rapidly as others and may
not be suitable for Quick wash
The right amount to dispense will
depend on the following:
– The quantity of laundry (follow the
machine’s dispensing
recommendation and reduce the
amount of detergent with smaller
loads as indicated on the display)
– The soiling level of the laundry.
Lightly soiled No visible dirt or stains.
Possibly slight body odour.
Normally soiled Visibly dirty and/or
just a few slight stains.
programmes.
Heavily soiled Stains and soiling
clearly visible.
Silks, woollens and knitwear containing
wool mixtures and hand-washable
garments should be washed using a
liquid detergent specifically designed
for washing woollens. Do not use
biological detergents on silk as the
enzymes may damage the silk!
– The water hardness level. Check with
your local water supplier if you do not
know the water hardness level in
your area.
Water softeners
A water softener can be used to cut
down on the use of detergents in
extremely hard water areas. Dispense
according to the amount specified on
the packaging. First add detergent and
then the water softener. Use a quantity
of detergent as for soft water. Miele do
not recommend connecting the
Instructions for use and recommended
amounts for a full load are given on the
detergent packaging.
Liquid detergent should be dispensed
using a ball provided by the
manufacturer for programmes without a
pre-wash.
For programmes with a pre-wash you
will need to purchase a special
machine to a household water softener.
container from the Miele Spare Parts
department which sits in the main wash
compartment j of the detergent
dispenser drawer. Add liquid detergent
to this container for the main wash and
to compartment i for the pre-wash.
Washing with several
components
If you wash using several components
(e.g. special application detergents),
dispense them into compartment j in
the following order:
1. Detergent
2. Water softener
3. Stain remover
This way the agents are distributed
more efficiently.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Fabric conditioners and liquid
starch
If starching frequently, clean the dis-
penser compartment and especially
the siphon tube and conditioner
channel regularly. See "Cleaning the
detergent dispenser drawer". Do not
add starch formulations or viscous
liquid starch to the § compartment
as it will clog it up. See "Adding
starch separately"
Fabric conditioners make garments soft
to handle and help prevent static cling
when tumble drying.
Starch stiffens and gives body to items
of laundry, e.g. shirts, tablecloths and
bed linen.
^ Dispense according to the amount
specified on the packaging.
Adding fabric conditioner separately
^ Add fabric conditioner to
compartment §.
^ Select the Starch Special
programme.
Automatic dispensing of fabric
conditioner or liquid starch to
laundry at the end of a programme
^ Press the Start/Stop T button.
Adding starch separately
^ Prepare the starch solution in
accordance with manufacturer's
instructions on the packaging.
^ Add the starch formulation to
compartment i.
^ Select the Starch Special
programme.
^ Press the Start/Stop T button.
^ Add the fabric conditioner or liquid
starch to compartment §. Do not
exceed the maximum level mark.
Colour run and dye removers /
dyes
^ Do not use colour run or dye
removers in this washing machine.
^ Dyes suitable for use in domestic
washing machines can be used.
However, please note that the salt
used in the dyeing process can
cause corrosion to stainless steel
components in the machine if you
dye frequently. Always observe the
manufacturer's instructions carefully.
The conditioner or liquid starch is
automatically dispensed in the last
rinse. At the end of the programme a
small amount of water remains in the
fabric conditioner compartment §.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Extra cleaning
,Disconnect the machine from the
mains electricity supply and
withdraw the plug from the socket
prior to cleaning the machine.
Carry out a hot wash (70°C or above)
with powder detergent approx. every 6
weeks to help prevent deposits building
up in the machine. These can occur
when washing is mainly done at low
temperatures, and also lead to
unpleasant smells. If you have no
reason to wash occasionally at this high
temperature, then run a Cottons 95°C
programme with detergent but no
laundry at regular intervals.
^ Clean the casing with a mild non-
abrasive detergent or soap and
water. Wipe dry with a soft cloth.
^ Clean the fascia panel with a damp
cloth and wipe dry with a soft cloth.
^ The drum can be cleaned using a
suitable proprietary stainless-steel
cleaning agent following the
manufacturer's instructions on the
packaging.
,Do not use solvents, abrasive
cleaners, glass cleaners or all-
purpose cleaning agents. These
might damage plastic surfaces and
other components because of the
chemicals they contain.
The washing machine must not be
hosed down.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part number 98013530, which is
suitable for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals. It
can be washed 300 times.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the detergent dispenser
drawer
Remove detergent residues regularly.
^ Clean the siphon.
1. Remove the siphon from
compartment §. Wash under
running warm water. Clean the
siphon tube in the same way.
^ Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release catch and at the
same time pull the drawer right out of
the machine.
2. Replace the siphon.
Over time, detergent residue can build
up in the water jets in the top of the
detergent drawer housing.
^ Clean the detergent drawer with
warm water.
^ Before replacing the detergent
drawer, use a bottle brush or similar
to clean them out.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the filter in the water
inlet
^ First turn off the stopcock.
^ Unscrew the threaded union
connecting the free end of the inlet
hose to the stopcock.
The washing machine has a filter to
protect the water inlet valve.
The accessible filter in the union in the
open end of the inlet hose should be
checked every six months, or more
often if there are frequent interruptions
to the external water supply.
^ Remove the rubber seal 1 from the
recess.
^ Using pointed pliers, take hold of the
plastic filter bar 2 and remove.
^ Clean the plastic filter.
^ Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is watertight. If water drips
out, tighten the connection.
Never forget to put the filter back in
place after cleaning.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
What to do, if . . .
With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Possible cause
Remedy
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
The display remains
dark and the
programme selector is
not lit up.
There is no power to
the machine.
has tripped.
The display shows:
The electronic system Enter the code for the system
Machine locked.
Enter code.
lock has been
activated.
lock and confirm the entry.
Deactivate the system lock if
you do not wish this message
to appear in the display the
next time the machine is
switched on.
The programme does The washing machine Prepare the machine as
not start when Drain/
Spin has been
selected.
has not been prepared described in "Before using for
for using for the first
time.
the first time".
The display is dark.
The display has
switched off
Press a button. Stand-by
comes to an end.
automatically to save
energy (Stand-by
mode).
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Fault messages in the display
Problem
Possible cause
Remedy A
DRAIN
FAULT
q
p
– The water outlet is
blocked or restricted.
– The drain hose has
– Clean the drain filter and
the drain pump.
– The maximum drain height
been fixed too high.
is 1 m.
INLET
FAULT
– The water inlet is
Check whether
– the stopcock is opened
blocked or restricted.
wide enough.
– the inlet hose is kinked.
WPS
ACTIVATED
o
The water protection
system has reacted.
Call the Service Department.
DRUM LIGHTING
FAULT
ä
The drum lighting is not Check that the drum lighting
locked in position.
is sitting correctly.
TECHNICAL
FAULT
call Service Dept
,
There is a fault.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
The following will flash Excessive foam has built Use less detergent next time
in the display:
up during washing.
and follow the
ANTI-CREASE
manufacturer's instructions
on dosage given on the
packaging.
alternately with
CHECK DETERGENT
ATo switch off the fault message: Switch the washing machine off with I-On/0-Off
button.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problems with the load size indicator
Problem
Possible cause
Remedy
There is no load size
in the display.
There was already ^ To recalibrate the sensor to the
zero setting:
laundry in the drum
when the washing
machine was
switched on. This
has decalibrated
the sensor from the
zero setting.
– Remove the laundry from the
drum.
– Switch off the washing
machine and leave the door
open.
– Switch on the washing
machine.
– Turn the programme selector
to the Cottons 95°C position.
– Press and hold the Load/
Detergent button until the
following appears in the
display:
Zero setting OK.
The display indicates a The load size
Rotate the drum once. If the
display still indicates a load
greater than <25%, recalibrate
the sensor to zero again (see
above section).
load greater than
<25% when the drum
is empty.
sensor has been
decalibrated from
the zero position.
The fault message:
The drum door is
– Open the drum door.
Zero setting not possible closed.
Empty drum
– Switch off the washing
machine and leave the door
open.
appears in the display.
– Switch on the washing
machine.
– Try and recalibrate to zero
again.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems
Problem
Possible cause
Remedy
The machine shakes
during the spin cycle.
The machine feet are not Level the machine (see
level.
"Installation").
The pump makes
strange noises.
This is not a fault! These noises occur at the end of
a pump sequence as a normal part of the operation.
Large amounts of
The water pressure is too – Clean the filter in the
detergent residue remain low.
in the detergent
dispenser drawer.
water inlet.
– It may be useful to
select the Water plus
Extra.
Powder detergent used in In future, add washing
conjunction with water
softeners tends to
become sticky.
powder into the
dispenser drawer first,
and then add the water
softener.
Fabric conditioner is not The siphon tube is not
Clean the siphon, (see
completely dispensed or correctly positioned, or is “Cleaning and care" -
too much water remains clogged up.
in the § compartment.
"Cleaning the detergent
dispenser drawer”).
The display is in a
different language.
A different language has Set the language you
been selected in
want. The flag symbol
will guide you.
Settings J Language J.
The laundry has not
been spun satisfactorily. was too low.
The spin speed selected Select a higher spin
speed next time.
When laundry is dry it
feels hard to the touch.
Too vigrous wash action. Programme in gentle
action and more water.
Not enough detergent
used.
Increase detergent dose
to prevent limescale
build up in laundry.
No fabric conditioner
used.
Use fabric conditioner in
last rinse.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
An unsatisfactory wash result
Problem
Possible cause
Remedy
Liquid detergent Liquid detergents
– Use a general purpose detergent
does not give the usually contain no
containing a bleaching agent.
required result.
bleaching agents.
They do not remove
fruit, coffee and tea
stains.
– Pour stain removers into
compartment j of the dispenser
drawer and liquid detergent into a
dispenser ball.
– Never put stain removers and
liquid detergent together in the
dispenser drawer.
Grey, greasy
Insufficient amounts of – Use more detergent.
particles cling to detergent were used
washed laundry. to break down the
particles of grease in
– Before washing the next load run
a Cottons 95°C programme with
powder detergent but without a
load.
heavily soiled laundry.
A stale smell is
in the drum and washing.
on laundry.
Low temperature
Before washing the next load run a
Cottons 95°C programme with
powder detergent but without a
load.
White residues
which look like
powder detergent (zeolites) to aid water
The detergent
contained compounds
– Try and brush off the residues
with a soft brush once the laundry
is dry.
are seen on dark softening which are
– Wash dark textiles using a
detergent which contains no
zeolites. Liquid detergents
usually contain no zeolites.
textiles after
washing.
not soluble in water.
They have ended up
on the laundry.
Clothes are
coming out
creased.
Programme was
overloaded.
– Reduce quantity of clothes in
drum.
The wrong programme – Check care labels with section
was used.
"How to wash correctly".
– Use easy iron conditioners.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The drum door does not open when you press the Door button
Possible cause
Remedy
The machine is not
connected to the
Insert the plug in the socket and switch on and / or
switch the machine on with the I-On/0-Off button.
electricity supply and / or
is not switched on.
The electronic programme Deactivate programme locking as described in
lock has been activated. "Electronic programme locking".
The electronic system lock Deactivate the system lock as described in the
has been activated.
"Settings J menu".
Power cut
Open the drum door as described in the next
section.
The door was not correctly Press hard against the lock side of the drum door
engaged.
and then press the Door button.
There is still water in the
drum and the machine is
unable to drain.
Clean the fluff filter and drain pump as described
in the next section.
For safety reasons the drum door cannot be opened if the suds temperature is
higher than 55°C.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Opening the drum door in the
event of a blocked drain outlet
and/or power failure
Blocked drain outlet
If the drain outlet is blocked, up to
25 litres of water will be retained in the
machine.
^ Switch the washing machine off.
There is a lever behind the detergent
drawer fascia panel.
,Caution: if laundry has been
washed at a high temperature, water
draining out of the machine will still
be hot. Danger of scalding!
Procedure for draining the machine
^ Place a suitable container under the
access flap.
When draining water from the
machine, do not unscrew the drain
filter completely or take it right out.
^ Remove the lever.
^ Unscrew the drain filter lid until water
runs out.
To interrupt the flow of water:
^ Use it to open the access flap.
^ Tighten the drain filter back up again.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Once the flow of water ceases:
,Make sure the drain filter is
^ Remove the drain filter completely.
securely tightened. Otherwise there
is a risk of water leakage during use.
Opening the drum door
,Always make sure that the drum
is stationary before reaching into the
machine to remove laundry.
Reaching into a moving drum is
extremely dangerous.
^ Clean it thoroughly.
^ Pull the emergency release
downwards (see illustration). The
drum door will open.
^ Remove any foreign objects (e.g.
buttons, coins, etc.) and fluff from the
filter housing. Turn the impeller by
hand to check that it rotates freely.
Any foreign object causing an
obstruction should be removed.
^ Put the drain filter back in place and
secure.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Changing the lamp for the
drum lighting
The washing machine will still
operate with no lamp in place or if the
lighting is faulty.
^ Remove the yellow lever from behind
the detergent drawer facia panel as
described previously.
^ Press the two prongs to separate the
plastic holder 1 from the protective
cover 2.
^ Switch the washing machine on and
open the drum door.
^ Now disconnect the washing
machine from the electricity supply,
see "Warning and Safety
instructions".
^ Remove the faulty lamp from the
plastic holder.
The new lamp must be of the same
type (G4) with a maximum power
output of 5 watts/12 volts.
The lamps are available from an
electrical retailer, your Miele Dealer or
from the Miele Spare Parts Department.
^ Insert the new lamp into the plastic
holder.
^ Carefully fit the plastic holder and the
protective cover together.
^ Insert the lighting unit back into the
socket and turn it clockwise to secure
it.
^ Insert the lever into the slot in the
drum lighting unit (see illustration)
and turn anti-clockwise (a quarter
turn) until you feel a resistance.
It is absolutely essential for the
correct functioning of the washing
machine that the drum lighting unit
is fitted correctly in position.
^ Pull out the loosened unit with your
fingers.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of any faults which you
cannot remedy yourself, please
contact:
Future updates (PC)
The indicator or check light marked PC
is the interface used by Miele service
technicians during servicing work for
testing purposes and for updating the
machine's programme data.
– your Miele dealer or
– the Miele Service Department (see
back cover for contact details).
When contacting your Dealer or the
Service Department, please quote the
model and serial number of your
appliance, both of which are shown on
the data plate visible above the
Appliance guarantee
Please see the guarantee card
supplied with your machine.
Optional accessories
porthole glass when the door is open.
Optional accessories for this washing
machine are available from your Miele
Dealer or from the Miele Spare Parts
Department.
Please note that telephone calls may
be monitored and recorded to
improve our service.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Front view
aInlet hose with "Waterproof" system
hDetergent dispenser drawer
bElectricity supply cable
iDrum door
c - f Flexible drain hose (with
jAccess to drain filter, drain pump
detachable swivel elbow)
and emergency release
gFacia panel with controls
kHandle recesses for moving the
machine
lFour height adjustable feet
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Rear view
aProtruding edge for holding when
eTransit bar covers
fRestraining clip for:
– Inlet hose
moving the machine
bElectricity supply cable
cInlet hose with "Waterproof" system
dDrainage hose
– Drain hose
– Electricity supply cable
– Transit bars when removed
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Installation surface
Installing the washing machine
A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
To manoeuvre the machine out of its
packing case to its installation site hold
it by the edge of the lid where it
protrudes to the rear of the washing
machine as well as by the handle
recesses at the front.
Please note the following points:
Please note:
^ The machine must be level and
securely positioned.
^ Do not lift the machine by the drum
door.
^ To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
,Ensure that the machine feet and
the floor are dry to prevent the
machine from slipping during the
spin cycle.
If installing on a wooden joist floor:
^ We recommend a plywood base
(at least 59x52x3 cm). The base
should span several joists and be
bolted to the joists and not only to the
floorboards. Check for the presence
of pipes and cables.
Removing the transit fittings
If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
,If the machine is installed on a
raised plinth, it has to be secured
against slippage during spinning
using retaining clips (available from
the Miele Spare Parts Dept).
^ To remove the left and right covers
1. Use a screwdriver to prise out the
cover as illustrated.
2. Pull the cover forwards to remove.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
^ Using the spanner supplied turn the
left-hand transit bar 90°, then
^ Turn the right-hand transit bar 90°,
then
^ withdraw the transit bar.
^ withdraw the transit bar.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
,The washing machine must not
be moved without the transit bars in
place.
Store the transit bars as shown or
keep them in a safe place for future
use. They must be re-fitted if the
machine is to be moved again
(e.g.when moving house).
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^ Secure the transit bars to the back of
the washing machine. Make sure that
holes b are fitted over retainers a.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
^ Using the spanner supplied turn
counter nut 2 in a clockwise
direction. Then turn counter nut 2
together with foot 1 to unscrew.
^ Use a spirit level to check the
machine is standing level.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
^ Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it
sits firmly up against the housing.
False values may also show in the Load
and Detergent display.
Screwing out and adjusting the feet
,All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Washer and Dryer stack
The fitting of building under kits and
stacking kits must only be
undertaken by qualified and
competent persons, in accordance
with the instructions supplied with
the kit.
A Miele tumble dryer can be stacked
with the washing machine. A "WTV"
stacking kit* is necessary and can be
purchased from the Miele Spare Parts
Department.
Please note
Building under a continuous
worktop/in a kitchen run
– A special building under conversion
kit* is required.
The machine lid must be replaced by
a cover plate. To ensure electrical
safety the cover plate must be fitted.
N.B.
If you wish to push your machine under
a worktop and there is space to do this
without removing the lid, the
conversion kit is not necessary.
Otherwise the conversion kit is
essential.
– For installation under a work surface
900/910 mm from the floor, a raising
kit* is required.
a Safety distance to wall:
at least 2 cm
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
b Height:
Stacking kit with pull-out shelf:
approx. 169 cm
Stacking kit without pull-out shelf:
approx. 170 cm
Fitting instructions are supplied with the
conversion kit.
All parts marked* are available from the
Miele Spare Parts or Sales Department.
Replacing the lid
If the lid has been removed in order to
fit a stacking kit or cover plate, ensure
that, if the lid is replaced, it fits securely
into the rear holders. Otherwise, it is not
properly secure for transport.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
The Miele Waterproof system
2) Electronic unit and washing
machine housing
The Miele Waterproof system protects
the washing machine from water
damage.
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the safety valves,
preventing any more water from
flowing into the machine and water in
the suds container is pumped away.
The system consists of three main
components:
1) the inlet hose
2) the electronic unit and the washing
machine housing
– Overflow protection
3) the drain hose
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
1) Inlet hose
– The inlet hose is fitted with an
additional electrical safety valve
which works like an automatic
stopcock and is housed in the inlet
hose connection box.
3) Drain hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being
emptied completely.
– It is pressure tested to between
7,000 and 10,000 kPa.
– The inlet hose has a protective
sleeve.
Any leaking water from the inlet hose
is fed into the sump through this
protective sleeve. A float switches off
the safety valve, preventing any more
water from flowing into the machine
and water in the suds container is
pumped away.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the water supply
The plastic casing of the safety valve contains electrical components. The
Waterproof system must only be connected to its own stopcock. It must not be
connected to mixer taps or similar and must not be fitted in areas where there is
the risk of water or other liquids reaching it.
The protective sleeve of the hose
must not be damaged or kinked.
Do not get wet.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
The machine should be connected to a Maintenance and care
mains water supply in accordance with
local and national safety regulations.
The German authorities do not require it
to have a non-return valve as the
washing machine has been designed
to comply with DIN regulations.
If you intend to unscrew the Miele
Waterproof system hose from the
stopcock it is essential to disconnect
the machine from the electricity supply
first.
Only use a Miele Waterproof system
hose should you need a replacement.
The machine is designed to operate
with a flow pressure of between 100
and 1,000 kPa. If it is higher than
1,000 kPa it is essential to fit a reducer
valve.
In order to protect the water inlet
valve, the dirt filter in the water inlet
valve connection must not be
removed.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" thread. The stopcock should
be fitted by a qualified plumber.
Extension hose
A 1.5 metre long (metal) extension hose
is available from your Miele dealer or
the Miele Spare Parts Department as an
optional extra.
,The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
This hose is tested to withstand
pressures of up to 14,000 kPa and can
be used as a flexible extension to the
water supply.
The washing machine is not suitable
for connection to a hot water supply
and connection to a household
N.B. Using this hose renders the
Waterproof system safety valve on the
inlet hose ineffective.
water softener is not recommended.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the drainage
system
Drain hose connection:
1. Direct into a sink or basin:
Please note the following
The machine drains via a drain pump
with a delivery head of 1 metre*.
– Hook the hose over the edge and
secure.
The drain hose must not be kinked as
this restricts drainage. The swivel elbow
at the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the drained
water being sucked back into the
machine.
If required, the drain hose can be
extended to a length of 5 m. The
necessary parts can be purchased
from the Miele Spare Parts Department
or your Miele dealer.
2. Connected securely to a plastic drain
pipe with a rubber nipple. There is no
need to use a non-return valve.
* For a delivery head of more than 1 m
(up to a maximum of 1.8 m) a second
duo-drain pump is available with the
corresponding kit from the Miele Spare
Parts Department or your Miele Dealer.
3. Connected securely to a standpipe.
4. Connected securely to a floor gully.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Electrical connection U.K.
Non-rewireable plugs BS 1363
All electrical work should be carried out The fuse cover must be refitted when
by a suitably qualified and competent
person, in strict accordance with
national and local safety regulations.
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply. The voltage and connected
load are given on the data plate.
Please ensure these match the
household mains supply. The fuse
rating is quoted on the plug.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
WARNING: THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA (in accordance
with DIN VDE 0664, VDE 0100 Section
739).
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Load
Consumption data
Energy
Water
Duration
in kWh
in litres
Normal
Intensive
Cottons Hygiene/Cottons Universal
95°C
60°C
5.0 kg
1.70
0.85
42
42
1 h 51 mins
2 h 06 mins
1 h 59 mins
1)
1)
5.0 kg
–
60°C
40°C
40°C
5.0 kg
5.0 kg
5.0 kg
0.85
0.49
0.49
42
42
42
1 h 30 mins
1 h 59 mins
1 h 59 mins
1 h 59 mins
–
1 h 30 mins
Minimum iron
1)
40°C
2.5 kg
2.5 kg
0.44
0.44
49
49
–
1 h 19 mins
1 h 19 mins
40°C
1 h 04 min
Delicates
30°C
1.0 kg
1.0 kg
2.0 kg
3.0 kg
2.5 kg
0.33
0.24
65
39
49 mins
36 mins
39 mins
59 mins
30 mins
59 mins
Silks /
30°C
–
Woollens /
30°C
0.22
35
–
Automatic
40°C
0.30 - 0.60
0.30
30 - 50
30
1 h 14 mins
–
Quick wash
40°C
Special programmes
Outer wear 40°C
Denim 40°C
Shirts 60°C
2.0 kg
1.0 kg
1.5 kg
0.43
0.50
0.90
57
45
55
1 h 03 mins
1 h 00 mins
1 h 12 mins
–
–
–
1)EN 60456 test programme
Note for test institutes:
For testing in accordance with EN 60456 you must select the Intensive Extra.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any Extras selected.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
85.0 cm
59.5 cm
58.0 cm
97.5 cm
94 kg
Width
Depth
Depth with door open
Weight
Maximum floor load
Capacity
1600 Newton (approx. 160 kg)
5 kg dry laundry
see data plate
see data plate
see data plate
see "Consumption data"
100 kPa (1 bar)
1000 kPa (10 bar)
1.60 m
Voltage
Rated load
Fuse rating
Consumption data
Water flow pressure minimum
Water flow pressure maximum
Inlet hose length
Drain hose length
Connection cable length
Drain pump head max.
Drain pump length max.
Lamp for drum lighting
Test certificates awarded
1.50 m
1.60 m
1.00 m
5.00 m
Type G4 (5 Watt/12 Volt)
Radio / TV suppression, VDE
61
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
for changing standard settings
The Settings menu is used to alter the washing machine's electronics to suit
changing requirements.
Settings can be altered at any time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
To open the Settings menu
Language F
ASwitch on the washing machine. The
The display shows several different
languages.
main menu will appear.
15:03
You can select one of the languages
displayed via the Language sub-menu.
Select programme
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
BAfter 5 seconds an additional line will
appear in the display.
A tick will appear beside the language
to show that it has been set.
15:03
Select programme
C
F
Back A
deutsch
english B
SETTINGS F ...
CPress the OK button.
H
DThis will take you into the Settings
^ Select the language you want and
confirm your selection.
menu.
C
Back A
LANGUAGE F ...
TIME OF DAY...
H
EUse the – and + buttons to select the
setting you want and confirm your
selection by pressing the OK button.
Important:
If you do not make a selection in the
Settings menu and in its sub-menus
within approx. 20 seconds, the menu
display will revert to the main menu.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Time of day
Water plus
First select either a 24 hour or 12 hour
clock.
This setting is used to select the
water intake setting for the Water plus
Extra.
Then set the current time of day.
There are three different options:
To select a 24 hour or 12 hour clock
Water + (the machine is delivered with
this option selected)
C
Y
Back A
24 h CLOCK
12 h CLOCK
The water intake is increased in the
wash and rinse stages of the
programmes.
^ Use the – and + buttons to select the
clock option setting you want and
confirm your selection by pressing
the OK button.
Extra rinse
An extra rinse is introduced in the
Cottons and Minimum iron
programmes.
The display will then switch to the time
of day setting.
Water + and Extra rinse
^ The water intake is increased in the
wash and rinse stages and an extra
rinse is also introduced in the Cottons
and Minimum iron programmes.
To set the time of day
00 : 00
A tick will appear beside the option to
show that it has been set.
Set time of day
^ Set the hour with the – and + buttons
and confirm your setting by pressing
the OK button. Now set the minutes.
The display will return to the Settings
menu.
C
Back A
T
Water plus
EXTRA RINSE
H
Select the option you want and confirm
your selection.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Gentle action
Suds cooling
Activating gentle action reduces the
drum action. Slightly soiled items are
washed more gently.
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Gentle action can be activated for the
Cottons and Minimum iron
programmes.
Suds cooling takes place when
temperatures of 95°C and 75°C are
selected.
The washing machine is delivered with
the Gentle action setting deactivated.
Suds cooling should be activated:
A tick will appear beside the option to
show that it has been set.
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
C
Back A
Off B
On
U
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
Suds cooling deactivated.
^ Select the option you want and
confirm your selection.
A tick will appear beside the option to
show that it has been set.
C
R
Back A
Off B
On
^ Select the option you want and
confirm your selection.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Lock X
^ After the last number has been
entered, press the OK button.
The system lock prevents your
machine being used without your
knowledge.
Yes
1 2 5
No
When the system lock has been
activated, you have to enter a code
after switching the washing machine
on. Otherwise the washing machine
cannot be operated.
Confirm lock code
^ Confirm the code with the OK button
or if you want to correct a mistake,
press the – button.
^ The lock will now be activated when
the washing machine is switched off.
To activate the lock
C
Back A
To unlock the washing machine
X
Activate...
When the machine is switched on
again, the display will request the lock
code.
^ Select Activate and confirm your
selection.
^ Enter lock code 125 as described
above and confirm the entry.
^ The display will now request that a
code is entered. The code is 125 and
cannot be altered.
Entry OK
W
Lock deactivated
To enter the lock code
The code is: 125
The washing machine is now unlocked.
To deactivate the lock
0
_
_
Proceed as for activating the lock.
Enter lock code
^ Use the + button to enter the first
number. Confirm your selection of
this number by pressing the OK
button. Then set the second number.
^ Repeat the process until all three
numbers have been entered.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Temperature S
Buzzer O
You can chose for the temperature to
be displayed as
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
°C / Celsius or °F / Fahrenheit.
A tick will appear beside the option to
show that it has been set.
There are two volumes:
Normal
C
S
Back A
°C / Celsius B
°F / Fahrenheit
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
^ Select the option you want and
confirm your selection.
Loud
The buzzer sounds at maximum volume
at the end of a programme or when
Rinse hold is reached.
A tick will appear beside the option to
show that it has been set.
C
O
Back A
Normal B
Loud
^ Select the option you want and
confirm your selection.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Keypad tones P
Display brightness
An audible tone sounds each time a
button is pressed.
There are ten different display
brightness settings.
The washing machine is delivered with
the keypad tone switched off.
The machine is delivered with the
display brightness on Setting 5.
A tick will appear beside the option to
show that it has been set.
The display brightness will change as
soon as a different setting is chosen.
q
C
P
Back A
Off B
On
dimmer
brighter
Set brightness
^ Set the display brightness you
require.
^ Select the option you want and
confirm your selection.
Display contrast
There are ten different display
contrast settings.
The machine is delivered with the
display contrast on Setting 5.
The display contrast will change as
soon as a different setting is chosen.
q
dimmer
brighter
Set contrast
^ Set the display contrast you require.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Stand-by
Memory
To save energy, the display goes out
after 10 minutes and the Start/Stop T
will start flashing slowly.
If an Extra has been selected for a
programme, or the recommended
spin speed has been altered, the
machine will store the changes in
memory at the start of a programme.
There are two options:
On
When this programme is chosen again
these settings will appear in the display.
Stand-by comes on:
– if a programme is not selected after
the machine has been switched on.
The washing machine is delivered with
the memory function deactivated.
– after a programme has started.
– at the end of a programme.
A tick will appear beside the option to
show that it has been set.
C
V
Back A
Off B
On
Not in current Prog. (the machine is
delivered with this option selected)
Stand-by comes on:
– if a programme is not selected after
the machine has been switched on.
^ Select the option you want and
confirm your selection.
– at the end of a programme.
To close the Settings menu
Pressing one of the buttons switches
the display back on again.
C
Back A
A tick will appear beside the option to
show that it has been set.
LANGUAGE F...
TIME OF DAY ...
H
C
Q
Back A
^ Select Back and confirm your
selection.
On
Not in current prog.
B
^ Select the option you want and
confirm your selection.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved/5104/W 2662
M.-Nr. 06 068 860 / 02
en - GB
Download from Www.Somanuals.com. All Manuals Search And Download.
|