Miele Washer Dryer W 5740 User Manual

Operating instructions  
for Washing machine  
W 5740  
en - GB  
To avoid the risk of accidents or  
damage to the machine it is  
essential to read these instructions  
before it is installed and used for the  
first time.  
M.-Nr. 07 483 960  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Operating the washing machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Washing environmentally and economically . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Energy and water consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
How to wash correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Extra quiet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Final spin speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Garment care label symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Changing a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 27  
Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
The correct detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Automatic dispensing of fabric conditioner or liquid starch to laundry  
at the end of a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Colour run and dye removers / dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
External casing and fascia panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Extra cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Cleaning the detergent dispenser drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Cleaning the water inlet filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
The programme does not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
An unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
The drum door does not open when you press the Door button. . . . . . . . . . . . . . 39  
Opening the drum door in the event of a blocked drain outlet  
and/or power failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Optional spare parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Transporting the washing machine to its installation site . . . . . . . . . . . . . . . . . 45  
Removing the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Screwing out and adjusting the feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 49  
Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
The Miele water protection system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Connection to the drainage system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Notes for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Programmable functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
To access programmable functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
To select a programmable function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
To alter a programmable function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
To come out of programmable functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Language ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Suds cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Temperature unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Standby display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Anti-crease. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
CareCollection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
This washing machine is not  
~
intended for use by persons (including  
This washing machine conforms to  
current safety requirements.  
Inappropriate use can, however,  
lead to personal injury and damage  
to property.  
children) with reduced physical,  
sensory or mental capabilities, or lack  
of experience and knowledge, unless  
they are supervised whilst using it or  
have been shown how to use it by a  
person responsible for their safety.  
To avoid the risk of accidents and  
damage to the washing machine,  
please read these instructions  
carefully before using it for the first  
time. They contain important  
Safety with children  
Keep children away from the  
~
washing machine at all times. It is not a  
toy! To avoid the risk of injury do not  
allow children to play on or near it or to  
play with its controls. Supervise  
information on its installation, safety,  
use and maintenance.  
Keep these instructions in a safe  
place and ensure that new users are  
familiar with the content. Pass them  
on to any future owner.  
children whilst you are using it.  
Older children may only use the  
~
washing machine if its operation has  
been clearly explained to them and  
they are able to use it safely,  
Correct application  
recognising the dangers of misuse.  
This washing machine is for  
~
For machines with a 'porthole' door,  
domestic use only and can only be  
used to wash items which are specified  
by the manufacturer to be  
~
remember that the porthole glass will  
be hot when washing at very high  
temperatures.  
machine-washable on the wash care  
label, and textiles composed of  
hand-washable wool or wool blend  
fabrics as well as satin, lace, silk and  
other hand-washable garments.  
Any other applications may be  
Do not let children touch it.  
dangerous. Miele cannot be held liable  
for damage resulting from incorrect or  
improper use or operation.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Technical safety  
Unauthorised repairs could result in  
~
unforeseen dangers for the user, for  
which Miele cannot accept liability.  
Repairs should only be undertaken by a  
Miele approved service technician.  
Ensure current is not supplied to the  
machine until after maintenance or  
repair work has been carried out.  
Before setting up the washing  
~
machine, check it for any externally  
visible damage.  
Do not install or use a damaged  
washing machine.  
Before connecting the washing  
~
machine, ensure that the connection  
data on the data plate (voltage and  
connected load) match the mains  
electricity supply. If in any doubt,  
consult a qualified electrician.  
If the connection cable is faulty it  
~
must only be replaced by a Miele  
approved service technician to protect  
the user from danger.  
In the event of a fault or for cleaning  
~
The electrical safety of this washing  
~
purposes, the washing machine is only  
completely isolated from the electricity  
supply when:  
machine can only be guaranteed when  
continuity is complete between it and  
an effective earthing system which  
complies with current local and national – it is switched off at the wall socket  
safety regulations. It is most important  
that this basic safety requirement is  
present and regularly tested, and  
and the plug is withdrawn, or  
– it is switched off at the mains, or  
where there is any doubt the household – the mains fuse is withdrawn, or the  
wiring system should be inspected by a  
qualified electrician. The manufacturer  
cannot be held liable for the  
screw-out fuse is removed (in  
countries where this is applicable).  
This washing machine must only be  
~
consequences of an inadequate  
earthing system (e.g. electric shock).  
connected to the on-site water supply  
using a new hose kit. Old hoses must  
not be re-used.  
Do not connect the washing  
~
machine to the mains electricity supply  
by an extension lead. Extension leads  
do not guarantee the required safety of  
the appliance (e.g. danger of  
overheating).  
In countries where there are areas  
~
which may be subject to infestation by  
cockroaches or other vermin, pay  
particular attention to keeping the  
machine and its surroundings in a  
clean condition at all times. Any  
damage which may be caused by  
cockroaches or other vermin will not be  
covered by the guarantee.  
Faulty components must only be  
~
replaced by genuine Miele original  
spare parts. Only when these parts are  
fitted can the safety standards of the  
machine be guaranteed.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
This washing machine may only be  
Turn off the stopcock if the machine  
~
is to be left for any length of time (e.g.  
~
used in mobile installations such as  
ships if a risk assessment of the  
installation has been carried out by a  
suitably qualified engineer.  
holiday), especially if there is no floor  
drain (gully) in the immediate vicinity.  
Flooding danger.  
~
Do not make any alterations to the  
~
washing machine, unless authorised to  
If hooking the drain hose into a wash  
basin, check that the water can drain  
off quickly enough to prevent the sink  
from overflowing. Make sure the drain  
hose is secure, so that the force of the  
water flowing out of the hose does not  
dislodge it.  
do so by Miele.  
Correct use  
Do not install your washing machine  
~
in rooms where temperatures below  
freezing may occur. Frozen hoses may  
burst or split. The reliability of the  
Take care to ensure that foreign  
~
objects (e.g. nails, pins, coins, paper  
clips) do not find their way into the  
machine with the laundry. These may  
damage components of the machine  
(e.g. suds container, drum), which in  
turn can result in damage to the  
laundry.  
electronic control unit may be impaired  
at temperatures below freezing point.  
Before using the washing machine  
~
for the first time, check that the transit  
bars at the rear of the machine have  
been removed (see section on  
"Installation and connection"). During  
spinning, a transit bar which is still in  
place may result in damage to both the  
machine and adjacent furniture or  
appliances.  
If the correct amount of detergent is  
~
dispensed, the machine should not  
need to be descaled. If, however, you  
do wish to descale the machine only  
use proprietary non-corrosive descaling  
agents and strictly observe the  
instructions on the packaging. A  
special descaling agent is available to  
order from the Miele Spare Parts  
Department or via the internet on  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Textiles which have been  
Only remove laundry from the  
~
~
pre-treated in solvent based cleaning  
agents must be thoroughly rinsed in  
clean water before being washed in the moving drum is extremely dangerous  
washing machine once the drum has  
stopped turning. Reaching into a  
machine.  
and could result in injury.  
Never use solvent based cleaning  
~
agents, e.g. those containing benzene,  
Accessories  
in this machine, as this may result in  
damage to component parts and create  
toxic fumes. Such agents also pose a  
fire and explosion hazard.  
Accessory parts may only be fitted  
~
when expressly approved by Miele. If  
other parts are used, guarantee,  
performance and product liability  
claims will be invalidated.  
Never use solvent based cleaning  
~
agents, e.g. those containing benzene,  
to clean the outside surfaces of this  
machine. They can cause damage to  
plastic surfaces.  
Miele cannot be held liable for  
damage caused by non-compliance  
with these Warning and Safety  
instructions.  
Only use dyes specified by the  
~
manufacturer as being suitable for use  
in a domestic washing machine. Always  
observe the manufacturer's instructions  
carefully.  
Colour run and dye removers  
~
contain sulphur compounds which can  
cause damage such as corrosion. Do  
not use these products in this machine.  
If liquid detergent comes into  
~
contact with the eyes, rinse them  
thoroughly with lukewarm water imme-  
diately. If swallowed, seek medical  
assistance immediately and retain the  
packaging or label for reference. Those  
with skin problems or sensitive skin  
should avoid their skin coming into  
contact with liquid detergent.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the washing machine  
Control panel  
aExtra option buttons  
Various extra options can be added  
to the washing programmes.  
fStart/Stop button  
For starting the programme selected  
and cancelling a programme once it  
has started.  
bDisplay  
See the following page for more  
information.  
gProgramme selector  
For selecting a programme. The  
indicator light next to the selected  
programme will come on. The  
programme selector can be turned  
clockwise or anti-clockwise.  
cTemperature button  
For selecting a temperature.  
dSpin speed button  
For selecting the final spin speed or  
Rinse hold (e) or deselecting the  
spin (No u).  
hjk button  
For switching the machine on or off.  
iDoor button  
Opens the machine door.  
ePC / Optical interface  
This is used by service technicians  
to run diagnostic checks on your  
machine and can also be used to  
update programming data in the  
future.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the washing machine  
Programme duration  
After the start of a programme, the  
estimated programme duration will  
appear in the display in hours and  
minutes.  
During the first 8 minutes the washing  
machine measures how much water is  
being absorbed by the laundry and  
uses this to calculate the load. The  
programme duration may be longer or  
shorter depending on this absorbency  
rate.  
The following are selected via the  
display:  
Programmable functions  
– wash temperature  
The programmable functions can be  
used to tailor washing programmes to  
suit your individual requirements. In  
programming mode, the display will  
show the function selected.  
– spin speed  
– programmable functions  
– cancellation of a programme  
– safety lock  
The display also shows:  
– the programme duration  
– the programme sequence  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Setting the language  
Before using the machine for the first  
time ensure that it is correctly  
installed and connected. See  
"Installation and connection". Also  
check that the drain filter is securely  
tightened to prevent the risk of water  
leaks during use.  
You will be asked to select the  
language you require for the display. It  
is possible to change the language at  
any time via the programmable  
functions.  
!
deutsch  
^ If the language shown is not the one  
you want, select the language you do  
want by turning the programme  
selector. Confirm your selection by  
pressing the Start/Stop button.  
This washing machine has  
undergone a thorough functional test  
in the factory and there will be some  
residual water in the drum from this  
process.  
Reminder to remove transit bars  
For safety reasons, spinning is not  
possible until the machine has been  
prepared for using for the first time. To  
activate the spinning function you must  
run a wash programme without laundry  
and without detergent.  
To avoid the risk of damage, the  
transit bars must be removed before  
the machine is used for the first time.  
See "Installation and connection" for  
instructions on how to do this.  
Using detergent could result in an  
excessive build-up of foam.  
^ After removing the transit bars (if this  
has not already been done by your  
fitter), press the Start/Stop button.  
This also activates the ball valve. The  
ball valve prevents detergent escaping  
from the suds container into the sump  
during a wash programme, thus making  
maximum use of the detergent.  
Running your first programme  
Run a Cottons 60°C programme without  
any laundry and without detergent.  
^ Press the jk button in.  
^ Open the stopcock.  
If the washing machine is being  
switched on for the first time, the  
welcome screen will appear.  
^ Press the Start/Stop button.  
^ At the end of the programme switch  
the machine off.  
The welcome screen will appear in  
the display every time the machine is  
switched on until a programme  
lasting longer than 1 hour has been  
completed.  
The machine is now ready for use.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing environmentally and economically  
Energy and water consumption  
Detergent  
– Water consumption and energy  
usage are determined by the size of  
the load.  
– Do not exceed the amounts of  
detergent recommended by the  
manufacturer on the packaging.  
To make the most out of your  
machine, load the maximum dry load  
for the programme you are using.  
– Adjust the dosage to the degree of  
soiling of the laundry.  
– Reduce the amount of detergent with  
smaller loads (approx. 1/3 less than  
the amount recommended can be  
used when washing a half load).  
– Use the Automatic plus and  
Express 20 programmes for small  
loads.  
– When smaller amounts of laundry are  
washed using the Cottons  
Choosing the correct extra option  
(Short, Pre-wash and Pre-wash +  
soak)  
programme, the automatic load  
recognition system will reduce the  
amount of water, time and energy  
used. This may mean that the time  
left shown in the display is adjusted  
during the course of the wash  
programme.  
Select:  
– A wash programme together with the  
Short extra option for light to normal  
soiling where there are no obvious  
marks.  
– Using the Cottons 60°C programme  
instead of the Cottons 95°C  
– A wash programme without any extra  
options for normal to heavy soiling  
with visible staining.  
programme will give energy savings  
of between 35% and 45%. This is  
sufficient for most levels of soiling.  
– A wash programme together with the  
Pre-wash + Soak extra option for  
heavily soiled laundry.  
– The Pre-wash extra option for laundry  
with large amounts of dirt (e.g. dust,  
sand).  
When drying with a tumble dryer  
Selecting the highest possible spin  
speed for the wash programme will  
save energy when drying in a tumble  
dryer afterwards.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
Brief instructions  
,If you use a solvent-based clean-  
ing agent (e.g. one containing ben-  
zene) to pre-treat a stain, make sure  
that any plastic parts (e.g. buttons)  
are protected, and that the cleaning  
agent is rinsed off before washing the  
garment in the machine.  
The headings numbered A, B, C, . . .  
show the operating sequence and can  
be used as brief instructions.  
ASort the laundry  
,Do not use solvent-based  
cleaning agents in this machine.  
^ Sort the laundry by colour and by  
care label. Most garments have a  
textile care label in the collar or side  
seam.  
Dark textiles often contain excess dye  
and should be washed separately  
several times before being included in  
a mixed load. Always wash whites and  
coloureds separately.  
^ Empty all pockets.  
,Foreign objects (e.g. nails,  
coins, paper clips, etc.) can cause  
damage to garments and  
– Curtains: Remove lead weights first  
or place in a laundry bag.  
components in the machine.  
– Underwiring and collar stiffeners:  
Any loose wiring in bras, shirt collar  
stiffeners, etc. should be removed or  
sewn in.  
^ Badly soiled areas, stains etc. should  
be cleaned as soon as possible,  
preferably whilst still fresh. Spillages  
should be carefully dabbed off using  
a soft colourfast cloth. Do not rub!  
– Knitted garments, trousers and  
jeans, T-shirts and sweat shirts: Turn  
inside out, if recommended by the  
manufacturer.  
Badly soiled areas can be pre-treated  
with liquid detergent, stain removers  
etc. first, following the manufacturer's  
instructions. With particularly stubborn  
stains ask your dry cleaner for advice.  
– Close any zips, fasten hooks and  
eyes etc before washing.  
– Fasten duvet covers etc. to prevent  
small items from being rolled up  
inside them.  
Do not wash any items in this machine  
which are specified by the  
manufacturer as not washable on the  
care label. (h symbol)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
BSwitch on the washing machine  
DSelect a programme  
CLoad the drum  
^ Press the Door button to open the  
drum door.  
^ Unfold the laundry and load loosely  
into the drum. Mixing both large and  
small items gives better wash results  
and also helps distribute the load  
evenly during spinning.  
The most efficient use of energy and  
water is achieved when a full load is  
washed. However, do not overload as  
this causes creases and reduces  
cleaning efficiency.  
^ Turn the programme selector  
clockwise or anti-clockwise to the  
required programme. The  
Make sure that no items are caught  
between the drum door and seal.  
programme indicator light for the  
programme selected will come on.  
ESelect a temperature / spin speed  
The suggested temperature and/or spin  
speed can be changed.  
1:49  
60°  
1400  
^ Press the Temperature button to alter  
the temperature and press the Spin  
speed button to alter the spin speed.  
^ Shut the door with a gentle swing.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
FSelect an extra option(s)  
Pre-wash+  
The Pre-wash+ button is used for  
activating the Pre-wash option on its  
own as well as a Pre-wash with an  
additonal soak time of one or two hours.  
Press the button:  
x 1 = Pre-wash  
x 2 = Pre-wash + 1 h soak  
x 3 = Pre-wash +2 h soak  
x 4 = No options selected  
Extra quiet  
^ Select an extra option by pressing  
the appropriate button. The relevant  
indicator light will come on to show  
which extra option has been  
selected.  
If using your washing machine during  
quiet periods, you can reduce the noise  
levels even more.  
The machine will activate the Rinse  
hold (e) option and not spin if the  
Extra quiet option is selected. The  
programme duration is longer.  
Not all the extra options are suitable for  
use with every programme.  
You can only select extra options which  
are compatible with the programme  
being used.  
To deactivate Rinse hold  
^ Use the Spin speed button to select  
the spin speed you want.  
Short  
For light to nomal soiling with no visible  
staining.  
The duration of the main wash is  
reduced.  
Water plus  
The water level in the main wash and  
the rinses will be increased if the Water  
plus option is selected.  
However, you can select other settings  
for Water plus. These are described in  
"Programmable functions".  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
GAdd detergent  
It is important to dispense the correct  
amount, because . . .  
. . . too little detergent results in:  
– Laundry not getting properly clean  
and with time it may become grey  
and hard to the touch.  
– Greasy particles clinging to the  
laundry.  
– Limescale deposits on the heater  
elements.  
^ Pull out the detergent drawer and  
place detergent in the compartments  
as follows:  
. . . too much results in:  
– Excessive foam which causes a low  
level of agitation and poor wash,  
rinse and spin results.  
i
Detergent for the pre-wash (divide  
the total recommended amount as  
follows: add 1/3 to compartment i  
and 2/3 to compartment j).  
– Higher water consumption (an  
additional rinse cycle will  
automatically switch in).  
j
– A burden to the environment.  
Detergent for the main wash,  
including Soak if selected  
§
Fabric conditioners or liquid starch  
^ Close the detergent drawer.  
See "Detergent" for further information.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
HStart the programme  
Check that all items have been  
removed from the drum. Items left in  
the drum could discolour other items  
in the next wash or become  
^ Press the flashing Start/Stop button.  
The estimated programme duration will  
appear in the display once the  
programme has started. During the first  
8 minutes the machine measures how  
much water is being absorbed by the  
laundry. The programme duration may  
be longer or shorter depending on this  
absorbency rate.  
discoloured themselves.  
The programme sequence is also  
shown in the display. The washing  
machine shows you when each section  
of the programme is reached.  
IRemove the laundry when the  
programme has finished  
In the anti-crease phase after the  
programme has finished, the following  
will appear alternately in the display:  
^ Check the folds in the door seal for  
any small articles, e.g. buttons which  
might be lodged there.  
0:00 Anti-crease  
^ Switch the machine off with the  
and  
jk button.  
0:00 Finish  
^ Close the drum door. Otherwise there  
is the danger of objects being placed  
inadvertently in the drum. If these  
remained unnoticed and were  
washed in the next load, they could  
damage the laundry.  
^ Press the Door button to open the  
drum door.  
^ Remove the laundry.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Spinning  
Final spin speed  
To omit the final spin (Rinse hold)  
^ Select the Rinse hold (e) setting  
using the Spin speed button. The  
laundry will not be spun and will  
remain suspended in the final rinse  
water. This reduces creasing if the  
laundry is not going to be removed  
from the drum immediately after the  
end of the programme.  
Programme  
Cottons  
rpm  
1400  
1200  
600  
Minimum iron  
Delicates  
Woollens /  
Proofing  
1200  
1000  
1400  
1200  
1200  
600  
Express 20  
Automatic plus  
Dark garments / Denim  
Shirts  
– To start the final spin:  
The washing machine will display the  
maximum spin speed possible. You  
can select a spin speed lower than  
this. Start the final spin by pressing  
the Start/Stop button.  
Intensive plus  
Spin  
1400  
1400  
1400  
Separate rinse/Starch  
– To end the programme:  
You can reduce the final spin speed.  
However, you cannot select a final spin  
speed higher than that shown in the  
chart above.  
Press the Door button. The water will  
drain away. Press the Door button  
again to open the door.  
Rinse and interim spin  
To omit rinse and interim spin and  
the final spin (No u)  
There is a spin after the main wash and  
between the rinses. A reduction in the  
final spin speed will also reduce the  
interim spin speed. If a spin speed of  
less than 700 rpm is selected for a  
Cottons programme, an additional rinse  
is introduced.  
^ Select the No u setting using the  
Spin speed button.  
The laundry is not spun after the final  
rinse. The water will drain away and the  
machine will go straight into the  
anti-crease stage.  
With some programmes an additional  
rinse is introduced if this setting is  
selected.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme chart  
Cottons 9ö8E76*  
cold to 95°C  
Max. load 7.0 kg  
Fabric  
Cotton, linen or cotton mix fabrics, e.g. table linen, towelling,  
underwear, T-shirts etc.  
Note for test institutes:  
Short programme: 3.5 kg load and Short extra option  
Minimum iron  
cold to 60°C  
Max. load 3.5 kg  
43218E76*  
Fabric  
Synthetic and mixed fibre garments as well as easy care cottons.  
If fabrics have a high proportion of man-made fibres it is advisable  
to programme the machine for "Gentle action". See  
"Programmable functions".  
Note  
Reduce the spin speed for fabrics which crease easily.  
Delicates 4321ac*  
cold to 60°C  
Max. load 2.5 kg  
Fabric  
For delicate garments made of synthetic fibres, mixed fibres,  
rayon and easy care cottons.  
Note  
Select No u (No spin) for items which crease easily.  
Woollens /ac*  
cold to 40°C  
Max. load 2.0 kg  
Fabric  
Machine-washable or hand-washable wool or wool blend fabrics.  
If the care label does not specify a temperature, wash using the  
cold setting.  
Note  
Reduce the spin speed for items which crease easily.  
Proofing  
Item  
40°C  
Max. load 2.5 kg  
For treating microfibre fabrics, skiwear, and table linen made from  
mainly synthetic fibres to provide a water and stain resistant finish.  
Notes  
– The items should be freshly laundered and spun or dried before  
proofing.  
– For best results, the items should be heat-treated afterwards,  
either in a tumble dryer or by ironing.  
Express 20 76*  
cold to 40°C  
Max. load 3.5 kg  
Fabric  
Cotton and minimum iron garments that have hardly been worn or  
are only very lightly soiled.  
Note  
The Short extra option will be activated automatically.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme chart  
Automatic plus 7621*  
cold to 40°C  
Max. load 5.0 kg  
Fabric  
Mixed loads of garments suitable for the Cottons and Minimum  
iron programmes. Sort according to colour.  
Note  
The wash parameters (e.g. water level, wash rhythm and spin  
speed) are adjusted automatically in this programme to ensure the  
best possible care and wash result for each item.  
Dark garments / Denim  
cold to 60°C  
Max. load 3.0 kg  
Fabric  
Notes  
Black and dark garments made from cotton, mixed fibre or denim.  
– Wash inside out.  
– Denim often contains excess dye and may run during the first  
few washes. Wash light and dark coloured items separately.  
Shirts  
cold to 60°C  
Max. load 2.0 kg  
Notes  
– Pre-treat collars and cuffs if necessary.  
– Wash silk shirts and blouses in the Delicates programme.  
Intensive plus  
cold to 95°C  
Max. load 7.0 kg  
Fabric  
Mixed loads of heavily soiled garments suitable for the Cottons  
and Minimum iron programmes. Sort according to colour.  
Notes  
– The pre-wash additional function will be activated automatically.  
– The duration of the main wash will be longer.  
Spin  
Notes  
– To drain only: Select No u (No spin).  
– Make sure you select the appropriate spin speed.  
Separate rinse/Starch  
Max. load 7.0 kg  
Fabric  
– For rinsing handwashed items.  
– For starching table cloths, serviettes and workwear.  
Notes  
– Use a low spin speed for items which crease easily.  
– Items for starching should be freshly laundered but not treated  
with fabric conditioner.  
* Please note that the "buckets" represent garment care label symbols. See  
"Garment care label symbols".  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extras  
The following extra options can be selected in addition to the programme:  
Cottons  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Minimum iron  
Delicates  
Woollens /  
Proofing  
X
X
X
X
X
X
Express 20  
Automatic plus  
Dark garments / Denim  
Shirts  
X1)  
X
X
X
X
X
X
X
X
X
Intensive plus  
Spin  
X2)  
Separate rinse/Starch  
X
X1) = The extra option is activated automatically as part of the programme  
X2) = The extra option is activated automatically as part of the programme and  
cannot be deselected  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
Washing  
Ironing  
The figure quoted in the bucket is the  
maximum temperature the garment  
can be washed at. The number of  
bars under the symbol indicates the  
level of agitation permitted.  
The number of dots indicates the  
ironing temperature  
I
H
G
Hot iron (max sole plate temp.  
approx. 200°C)  
Medium hot iron (max sole  
plate temp. approx. 150°C)  
9
4
c
/
No bar under the symbol: =  
normal agitation  
Cool iron (max sole plate  
temp. approx. 110°C). Do not  
steam iron garments carrying  
this symbol.  
One bar under the symbol: =  
reduced agitation  
Two bars under the symbol: =  
much reduced agitation  
J
Do not iron  
Hand wash (if no temperature  
is specified use the lowest  
temperature or cold)  
Professional cleaning  
f
p
Dry clean only. The letters  
indicate the type of cleaning  
agent required.  
h
Do not wash  
w
Professional Wet Clean only  
Do not dry clean  
Drying  
D
The number of dots indicates the  
drying temperature  
Bleaching  
q
r
s
Normal temperature  
Low temperature  
Do not tumble dry  
x
{
Any oxidising bleaching  
agent can be used  
Only use an oxygen based  
bleach or a non-chlorine  
bleach  
z
Do not bleach  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme sequence  
Main wash  
Rinses  
Spinning  
Water  
level  
Wash  
Water Rinses Interim  
Final  
spin  
rhythm  
level  
(
e
e
e
spin  
L
L
Cottons  
d
(
e
e
(
d
(
(
a
c
2-41)2)  
2-33)  
3
L
L
L
L
L
L
L
L
Minimum iron  
Delicates  
d
Woollens /  
Proofing  
f
2
L
d
Express 20  
Automatic plus  
b
d
e
d
2-33)  
2-33)  
3
L
L
abc  
b
Dark garments /  
Denim  
Shirts  
e
(
c
a
e
(
2
L
L
L
L
L
Intensive plus  
Spin  
2-41)2)  
Separate rinse/Starch  
(
c
Please see next page for description of the symbols  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme sequence  
d = Low water level  
( = Medium water level  
e = High water level  
a= Intensive rhythm  
b= Normal rhythm  
Special features in the programme  
sequences:  
Anti-crease:  
At the end of the programme, the drum  
continues to turn at intervals for up to  
30 minutes to help prevent creasing.  
Exception: There is no anti-crease  
phase in the Woollens programme.  
The door can be opened and laundry  
removed at any time during the  
anti-crease phase.  
c= Gentle rhythm  
d= Sensitive rhythm  
e= Ultra sensitive rhythm  
f= Handwash rhythm  
1)  
A second rinse is carried out when a  
This machine has fully electronic  
controls with automatic load  
temperature of 60°C to 95°C has  
been selected. A third rinse is  
carried out when a temperature  
below 60°C is selected.  
recognition. It takes in the right amount  
of water required for the programme  
depending on the amount of laundry  
and its absorbency rate. This means  
that programme cycles and durations  
can vary.  
2) An third or fourth rinse is carried out  
if:  
– there is too much foam in the drum  
The programme sequences outlined in  
the chart are based on the basic  
programme with a full load. Extra  
options which can be selected have not  
been taken into account.  
– a spin speed lower than 700 rpm has  
been selected  
No u has been selected.  
3)  
A third rinse is carried out if:  
The display shows the stage the  
programme has reached.  
No u has been selected.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the programme sequence  
Cancelling a programme  
Changing a programme  
You can cancel a programme at any  
time after it has started.  
After the start of a programme it is no  
longer possible to select a different  
programme.  
^ Press the Start/Stop button.  
Temperature  
Cancel programme  
It is possible to select a different  
temperature up to 5 minutes after the  
programme has started.  
^ Press the flashing Start/Stop button  
again.  
The suds will be pumped away.  
If you want to remove the laundry:  
^ Press the Door button.  
^ Press the Temperature button.  
Spin speed  
It is possible to change the spin speed  
up until the final spin begins.  
If you want to select a different  
programme:  
^ Press the Spin speed button.  
^ Switch the machine off with the  
jk button.  
Extra options  
^ Switch the washing machine back on  
It is possible to select or deselect the  
Short and Water plus extra options up  
to five minutes after the programme has  
started.  
again.  
^ Check that there is still detergent in  
the detergent drawer. Add detergent,  
if necessary.  
A programme cannot be cancelled  
or changed if the safety lock has  
been activated.  
^ Select and start a new programme.  
Interrupting a programme  
^ Switch the machine off with the  
jk button.  
To continue with the same programme:  
^ Switch the machine back on with the  
jk button.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the programme sequence  
Adding or removing laundry  
Safety lock  
after a programme has started  
The safety lock prevents the machine  
from being opened and programmes  
from being cancelled during a wash  
programme.  
^ Press the Door button to open the  
drum door.  
^ Add or remove items.  
^ Close the drum door.  
To activate the safety lock  
The programme will continue  
automatically.  
^ Press and hold in the Start/Stop  
button after the programme has  
started.  
Please note:  
Stop or in 3 secs 0  
Once a programme has started the  
machine cannot recognise any  
adjustment to the load.  
^ Keep the Start/Stop button pressed in  
until the time has elapsed and the  
following appears in the display:  
For this reason, if laundry is added or  
removed after the start of a programme,  
the machine will always complete the  
programme cycle assuming a full load  
which can lead to an increase in the  
programme duration shown in the  
display.  
Locked 0  
The safety lock is now activated. It is  
deactivated automatically at the end of  
the programme.  
To deactivate the safety lock  
The door cannot be opened, if:  
^ Press and hold in the Start/Stop  
button after the programme has  
started.  
– the suds temperature is above 55°C.  
– the water is above a certain level.  
Unlock in 3 secs 0  
– the programme has reached the  
Final spin stage.  
^ Keep the Start/Stop button pressed in  
until the time has elapsed and the  
following appears in the display:  
If you press the Door button when the  
above conditions are present, the  
following will appear in the display:  
Unlocked 1  
:
Door locked  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
The correct detergent  
All modern detergents produced for automatic washing machines are suitable.  
Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets  
are suitable for full loads, but note that it may be impractical to reduce tablets for  
smaller loads. Some tablets do not dissolve as rapidly as others, and may not be  
suitable for programmes with short durations.  
Do not use biological detergents on silk as the enzymes may damage the silk!  
Instructions for use and recommended dosage amounts are given on the  
detergent packaging.  
Liquid detergent should be dispensed using a ball provided by the manufacturer  
for programmes without a pre-wash.  
For programmes with a pre-wash you will need to purchase a special container  
from the Miele Spare Parts department which sits in the main wash compartment  
j of the detergent dispenser drawer . Add liquid detergent to this container for  
the main wash and to compartment i for the pre-wash.  
See "Optional accessories" at the end of this booklet for details of Miele  
branded care products including detergents and fabric conditioner.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
Universal Detergent Detergent Specialist Proofing  
Fabric  
detergent  
for  
for  
detergent agent conditioner  
coloureds delicates  
Cottons  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Minimum iron  
Delicates  
Woollens /  
Proofing2)  
Express 201)  
Automatic plus  
X
X
X
X
X
X
X
X
X
Dark garments /  
Denim1)  
Shirts  
X
X
X
X
X
X
X
Intensive plus  
Separate rinse/  
X
Starch  
1)  
Use liquid detergent  
2)  
Only use proofing agents which are stated by the manufacturer as being  
"suitable for use on membrane textiles" as these consist of fluorochemical  
compounds. Do not use proofing agents which contain paraffin. Add proofing  
agents to compartment §.  
3)  
Use powder detergent  
Specialist detergent:  
Detergent designed specifically for the wash programme or type of fabric.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
The right amount to dispense will  
depend on the following:  
Water softener  
A water softener can be used to cut  
down on the use of detergents in hard  
water areas. Dispense according to the  
amount specified on the packaging.  
First add detergent and then the water  
softener.  
– The quantity of laundry  
– The soiling level of the laundry  
Lightly soiled  
No visible dirt or stains. Possibly  
slight body odour.  
Miele branded water softening tablets  
are available from the Miele Spare Parts  
Department or via the internet on  
Normally soiled  
Visibly dirty and/or just a few slight  
stains.  
Heavily soiled  
Use a quantity of detergent as for soft  
Visible dirt and stains and/or dried on water.  
soiling.  
Miele do not recommend connecting  
– The water hardness level.  
Check with your local water supplier  
if you do not know the hardness level  
in your area.  
the machine to a household water  
softener.  
Washing with several  
components  
If you wash using several components  
(e.g. special application detergents),  
we recommend always dispensing the  
agents into compartment j in the  
following order:  
1. Detergent  
2. Water softeners  
3. Stain remover  
This way the agents are distributed  
more evenly.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
Fabric conditioners and liquid  
starch  
If starching frequently, thoroughly  
clean the dispenser compartment,  
especially the siphon tube and the  
fabric conditioner channel, regularly.  
See "Cleaning the detergent  
Fabric conditioners  
make garments soft to handle and help  
prevent static cling when tumble  
drying.  
dispenser drawer". Do not use  
powder starch formulations or  
viscous liquid starch in the §  
compartment as it will clog up.  
Starch  
stiffens and gives body to items of  
laundry, e.g. shirts, tablecloths and bed  
linen.  
Colour run and dye removers /  
dyes  
Automatic dispensing of fabric  
conditioner or liquid starch to  
laundry at the end of a programme  
^ Do not use colour run or dye  
removers in this machine.  
^ Dyes suitable for use in domestic  
washing machines can be used.  
However, please note that the salt  
used in the dyeing process can  
cause corrosion to stainless steel  
components in the machine if you  
dye frequently. Always observe the  
manufacturer's instructions carefully.  
^ Add the fabric conditioner or liquid  
starch to compartment §. Do not  
exceed the maximum level mark.  
It will be automatically dispensed in the  
last rinse. At the end of the programme  
a small amount of water remains in the  
fabric conditioner compartment §.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Extra cleaning  
,Disconnect the machine from the  
mains electricity supply and  
Carry out a hot wash (70°C or above)  
with powder detergent approx. every 6  
weeks to help prevent deposits building  
up in the machine. These can occur  
when washing is mainly done at low  
temperatures, and can lead to  
withdraw the plug from the socket  
before cleaning the machine.  
,The washing machine must not  
be hosed down.  
unpleasant smells. If you have no  
reason to wash occasionally at this high  
temperature, then run a Cottons 95°C  
programme with detergent but no  
laundry at regular intervals.  
A range of Miele branded cleaning and  
conditioning agents is available to  
order from the Miele Spare Parts  
Department, or via the internet on  
Cleaning the detergent  
dispenser drawer  
External casing and fascia  
panel  
Remove detergent residues regularly.  
Clean the casing using a Miele E-Cloth,  
or with a mild, non-abrasive cleaning  
agent or soap and water using a well  
wrung-out cloth. Wipe dry with a soft  
cloth.  
^ The drum and any stainless steel  
outer panels can be cleaned using a  
suitable stainless-steel cleaning  
agent following the instructions on  
the packaging.  
,Do not use solvents, abrasive  
cleaners, glass cleaners or  
all-purpose cleaning agents.  
These might damage plastic  
surfaces and other components  
because of the chemicals they  
contain.  
^ Pull out the detergent dispenser  
drawer until a resistance is felt. Press  
down the release catch and at the  
same time pull the drawer right out of  
the machine.  
^ Clean the detergent drawer with  
warm water.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
^ Clean the siphon.  
Cleaning the detergent dispenser  
drawer housing  
1. Remove the siphon from  
compartment § and rinse under  
warm running water. Clean the  
siphon tube in the same way.  
^ Use a bottle brush to remove  
detergent residues and limescale  
from the jets inside the detergent  
dispenser drawer housing.  
2. Replace the siphon.  
If starching frequently, thoroughly  
clean the siphon and siphon tube  
regularly. A build-up of starch will  
cause them to get clogged.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the water inlet filters  
To clean the filter in the water inlet  
valve:  
The washing machine has two filters to  
protect the inlet valves.  
^ Using pliers, carefully loosen the  
ribbed plastic nut on the inlet valve  
and unscrew.  
These filters should be checked every  
six months or so, or more often if there  
are frequent interruptions to the water  
supply.  
To clean the filter in the union in the  
open end of the inlet hose:  
^ First turn off the stopcock.  
^ Unscrew the threaded union  
connecting the free end of the inlet  
hose to the stopcock.  
^ Use pointed nose pliers to withdraw  
the plastic filter by the bar (see  
illustration). Clean, put back and  
secure.  
The two filters must be put back in  
place after cleaning.  
^ Remove rubber seal 1 from the  
recess.  
^ Using pointed pliers, take hold of  
plastic filter bar 2, remove the filter  
and clean it.  
^ Put the filter and seal back in the  
reverse order and reconnect the  
hose.  
^ Turn on the stopcock and check the  
connection is watertight. If it leaks,  
tighten the connection.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
With the help of the following notes, minor faults in the performance of the  
machine, some of which may result from incorrect operation, can be put right  
without contacting the Service Department.  
,Repair work to electrical appliances should only be carried out by a  
suitably qualified person in strict accordance with current local and national  
safety regulations. Repairs and other work by unqualified persons could be  
dangerous. The manufacturer cannot be held liable for unauthorised work.  
The programme does not start  
Problem  
Possible cause  
Remedy  
Check whether  
The display remains  
dark, and the Start/  
Stop button indicator  
light does not come  
on.  
There is no power to  
the machine.  
– the mains plug is plugged  
in and switched on.  
– the fuse or circuit breaker  
has tripped.  
You are asked to enter Access via a code has Enter the code and confirm  
a code.  
been activated.  
the entry. Deactivate the code  
if you do not wish this  
message to appear in the  
display the next time the  
machine is switched on.  
The display is dark.  
The display has  
switched off  
Press a button. Standby  
comes to an end.  
automatically to save  
energy (Standby  
mode).  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Fault messages in the display  
Problem  
Possible cause  
Remedy A  
; lights up in the  
display and  
– The water outlet is  
blocked or  
– Clean the drain filter and  
the drain pump.  
Drain fault  
restricted.  
– The maximum delivery  
head is 1 m.  
flashes.  
– The drain hose has  
been fixed too high.  
; lights up in the  
display and  
– The water inlet is  
blocked or  
Check whether  
– the stopcock is opened  
properly.  
Water inlet  
fault  
restricted.  
– the inlet hose is kinked.  
flashes.  
the water pressure is too  
low.  
; lights up in the  
display and  
The water protection  
system has reacted.  
Call the Service Department.  
Waterproof  
fault  
flashes.  
; lights up in the  
display and  
There is a fault.  
Start the programme again.  
If the fault message appears  
again, contact the Service  
Department.  
Technical  
fault  
flashes.  
Anti-crease  
Excessive foam has  
built up during  
washing.  
Use less detergent next time  
and follow the manufacturer's  
instructions on dosage given  
on the packaging.  
Chk detergent  
flashes in the display.  
ATo switch off the fault message: Switch the machine off with jk button.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
General problems  
Problem  
Possible cause  
Remedy  
The machine shakes  
during the spin cycle.  
The machine feet are not Level the machine (see  
level.  
"Installation and  
connection").  
The laundry has not been The machine detected an Include both large and  
spun properly and is still imbalance during the final small items in the load as  
wet. spin and reduced the this will give better  
spin speed automatically. distribution.  
The laundry has not spun The spin speed selected Select a higher spin  
satisfactorily. was too low. speed next time.  
The pump makes strange This is not a fault! These noises occur at the end of a  
noises.  
pump sequence as a normal part of the operation.  
There is a lot of  
The water pressure is too – Clean the water inlet  
detergent residue in the low.  
detergent drawer.  
filter.  
– Select Water plus.  
Powder detergent used  
Add washing powder  
with water softeners can and then add the water  
be sticky.  
softener.  
Fabric conditioner is not The siphon tube is not  
Clean the siphon, (see  
completely dispensed or correctly positioned or is "Cleaning and care -  
too much water remains clogged up.  
Cleaning the detergent  
dispenser drawer").  
in the § compartment.  
The display is in a  
different language.  
A different language has Set the language you  
been selected in the want. The flag symbol  
Programmable functions will guide you.  
- Language J .  
When laundry is dry, it  
feels hard to the touch.  
Too vigorous wash action. Programme in gentle  
action and more water.  
Not enough detergent  
used.  
Increase detergent dose  
to prevent limescale  
build-up in laundry.  
No fabric conditioner  
used  
Use fabric conditioner in  
last rinse.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
An unsatisfactory wash result  
Problem  
Possible cause  
Remedy  
Liquid detergent  
does not give the  
required result.  
Liquid detergents usually – Use a general purpose  
contain no bleaching  
agents. They do not  
remove fruit, coffee and  
tea stains.  
detergent containing a  
bleaching agent.  
– Add stain removers into  
compartment j of the  
detergent dispenser drawer  
and liquid detergent into a  
dispenser ball.  
– Never put stain removers  
and liquid detergent together  
in the dispenser drawer.  
Grey, greasy  
Insufficient amounts of  
detergent were used to  
break down the particles  
of grease in heavily  
soiled laundry.  
– Use more detergent.  
particles cling to  
washed laundry.  
– Before washing the next load  
run a Cottons 95°C  
programme with powder  
detergent but without a load.  
White residues  
which look like  
powder detergent  
are seen on dark  
textiles after  
The detergent contained – Try and brush off the  
compounds (zeolites) to  
aid water softening  
residues with a soft brush  
once the laundry is dry.  
which are not soluble in  
water. They have ended  
up on the laundry.  
– Wash dark textiles using a  
detergent which contains no  
zeolites. Liquid detergents  
usually contain no zeolites.  
washing.  
– Use the Dark garments /  
Denim programme for dark  
coloured laundry.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
The drum door does not open when you press the Door button  
Possible cause  
Remedy  
The machine is not  
connected to the  
Insert the plug in the socket and switch on and/or  
switch the machine on with the jk button.  
electricity supply and/or is  
not switched on.  
The safety lock has been  
activated.  
Deactivate the safety lock as described in  
"Changing the programme sequence - Safety  
lock".  
Access via a code has  
been activated.  
Deactivate the code as described in  
"Programmable functions - Code".  
Power cut.  
Open the drum door as described in the next  
section.  
The door was not correctly Press hard against the lock side of the drum door  
engaged.  
and then press the Door button.  
There is still water in the  
drum and the machine is  
unable to drain.  
Clean the drain filter and drain pump as described  
in the next section.  
For safety reasons the drum door cannot be opened if the suds temperature is  
higher than 55°C.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Opening the drum door in the  
event of a blocked drain outlet  
and/or power failure  
Blocked drain outlet  
If the drain outlet is blocked, up to  
25 litres of water will be retained in the  
machine.  
^ Switch the washing machine off.  
There is a lever behind the detergent  
drawer fascia panel.  
,Caution: if laundry has been  
washed at a high temperature, water  
draining out of the machine will still  
be hot. Danger of scalding!  
Procedure for draining the machine  
^ Place a suitable container under the  
access flap.  
When draining water from the  
machine, do not unscrew the drain  
filter completely or take it right out.  
^ Remove the lever.  
^ Unscrew the drain filter lid until water  
runs out.  
To interrupt the flow of water:  
^ Use it to open the access flap.  
^ Tighten the drain filter back up again.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Once the flow of water ceases:  
,Make sure the drain filter is  
securely tightened. Otherwise there  
is a risk of water leakage during use.  
Opening the drum door  
,Always make sure that the drum  
is stationary before reaching into the  
machine to remove laundry.  
Reaching into a moving drum is  
extremely dangerous.  
^ Remove the drain filter completely.  
^ Clean it thoroughly.  
^ Pull the emergency release  
downwards (see illustration). The  
drum door will open.  
^ Remove any foreign objects (e.g.  
buttons, coins, etc.) and fluff from the  
filter housing. Turn the impeller by  
hand to check that it rotates freely.  
Any foreign object causing an  
obstruction should be removed.  
^ Put the drain filter back in place and  
secure.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After sales service  
In the event of any faults which you  
cannot remedy yourself, please  
contact:  
Future updates (PC)  
The indicator light marked PC is the  
interface used by Miele service  
technicians during servicing work for  
testing purposes and for updating the  
machine's programme data.  
– your Miele Dealer or  
– Miele (see back cover for contact  
details).  
When contacting your Dealer or Miele,  
please quote the model and serial  
number of your machine, both of which  
are shown on the data plate visible  
above the porthole glass when the door  
is open.  
Appliance guarantee  
Please see the guarantee card  
supplied with your machine.  
Optional spare parts and accessories  
Optional spare parts and accessories  
for this washing machine are available  
from your Miele Dealer, the Miele Spare  
Parts Department or via the internet at  
Please note that telephone calls may  
be monitored and recorded for  
training purposes.  
N.B. A call-out charge will be applied  
for service visits where the problem  
could have been resolved as  
described in these instructions.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Front view  
aInlet hose (tested to withstand  
pressure of at least 7,000 kPa)  
hDetergent dispenser drawer  
iDrum door  
bElectricity supply cable  
jAccess to drain filter, drain pump  
and emergency release  
c - f Flexible drain hose (with  
detachable swivel elbow)  
kHandle recesses for moving the  
machine  
gControl panel  
lFour height adjustable feet  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Rear view  
aProtruding lid for holding when  
moving the machine  
eTransport clip for inlet and drain  
hoses  
bElectricity supply cable  
fSafety cap for transit bars  
cInlet hose (tested to withstand  
pressure of at least 7,000 kPa)  
gTransport clip for inlet and drain  
hoses and for storing transit bars  
when not in use.  
dDrain hose  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Installation surface  
Transporting the washing machine to  
its installation site  
A concrete floor is the most suitable  
installation surface for a washing  
machine, being far less prone to  
vibration during the spin cycle than  
wooden floorboards or a carpeted  
surface.  
To manoeuvre the machine out of its  
packing case to its installlation site,  
hold it by the edge of the lid where it  
protrudes to the rear of the machine as  
well as by the handle recesses at the  
front.  
Please note:  
,Ensure that the machine feet and  
the floor are dry to prevent the  
machine from slipping during the  
spin cycle.  
^ The machine must be level and  
securely positioned.  
^ To avoid vibrations during spinning,  
the machine should not be installed  
on soft floor coverings.  
Removing the transit bars  
If installing on a wooden joist floor:  
^ We recommend a plywood base (at  
least 59x52x3 cm). The base should  
span several joists and be bolted to  
the joists and not only to the  
floorboards. Check for the presence  
of pipes and cables first.  
If possible, install the machine in a  
corner, as this is usually the most stable  
part of the floor.  
,If the machine is installed on a  
raised plinth, it has to be secured  
against slippage during spin using  
retaining clips (available from the  
Miele Spare Parts Dept). Otherwise  
there is the danger of the machine  
moving about.  
^ To remove the left and right covers  
1. Pull on the attached stopper,  
2. then use a screwdriver to release the  
catch at the top.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
^ Using the spanner supplied, turn the  
^ Turn the right-hand transit bar 90°,  
left-hand transit bar 90°, then  
then  
^ withdraw the transit bar.  
^ withdraw the transit bar.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
,To avoid the risk of injury the  
holes for the transit bars must be  
covered after the transit bars have  
been removed.  
^ Secure the transit bars to the back of  
the washing machine. Make sure that  
the top catch is located above the  
holder.  
,The machine must not be moved  
without the transit bars in place.  
Store them as shown or keep them  
in a safe place for future use. They  
must be re-fitted if the machine is to  
be moved again (e.g. when moving  
house).  
^ Plug the holes with the plastic caps  
as illustrated.  
Re-fitting the transit bars  
Re-fitting is carried out by reversing the  
procedure.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Levelling the machine  
The machine must stand perfectly level  
on all four feet to ensure safe and  
proper operation.  
Incorrect installation may increase  
electricity and water consumption and  
may cause the machine to move about.  
Screwing out and adjusting the feet  
The four adjustable screw feet are used  
to level the machine. All four feet are  
screwed in when the machine is  
delivered.  
^ Use a spirit level to check the  
machine is standing level.  
^ Hold foot 1 securely with a pipe  
wrench. Turn counternut 2 again  
using the spanner supplied until it  
sits firmly up against the housing.  
,All four counternuts must be  
firmly up against the housing. Please  
also check this for the feet which did  
not need adjustment. Otherwise  
there is the danger of the machine  
moving about.  
^ Using the spanner supplied turn  
counternut 2 in a clockwise direction.  
Then turn counternut 2 together with  
foot 1 to unscrew.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Washer and Dryer stack  
The fitting of building-under kits and  
stacking kits must only be  
undertaken by qualified and  
competent persons, in accordance  
with the instructions supplied with  
the kit.  
A Miele tumble dryer can be stacked  
with the washing machine. A "WTV"  
stacking kit* is necessary.  
Please note:  
Building under a continuous  
worktop/in a kitchen run  
If you wish to push your machine under  
a worktop and there is space to do this  
without removing the lid, the  
conversion kit is not necessary.  
Otherwise the conversion kit is  
essential.  
– A special building-under conversion  
kit* is required.  
To ensure electrical safety, the  
washing machine lid must be  
replaced by the cover plate supplied  
with the conversion kit.  
– For installation under a work surface  
900/910 mm from the floor, a raising  
kit* is required.  
a Safety distance to wall:  
at least 2 cm  
b Height:  
– Connections for electricity, water and  
drainage should be installed in such  
a way that they remain accessible  
when the machine is in place.  
Stacking kit with pull-out shelf:  
approx. 169 cm  
Stacking kit without pull-out shelf:  
approx. 170 cm  
Fitting instructions are supplied with the  
conversion kit.  
Replacing the lid  
All parts marked* are available from  
your Dealer, the Miele Spare Parts  
Department or via the internet at  
If the lid has been removed in order to  
fit a stacking kit or cover plate, ensure  
that, if the lid is replaced, it fits securely  
into the rear holders. Otherwise, it is not  
properly secure for transport.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
The Miele water protection  
system  
– Overflow protection  
This prevents the washing machine  
taking in too much water. If the water  
level exceeds a certain level, the  
drain pump switches in and pumps  
the excess water away.  
The Miele water protection system  
protects the washing machine from  
water damage.  
The system consists of three main  
components:  
3) Drain hose  
1) the inlet hose  
The drain hose is protected by a  
ventilation system which prevents the  
washing machine from being  
emptied completely.  
2) the electronic unit and the washing  
machine housing  
3) the drain hose  
1) Inlet hose  
The inlet hose can withstand  
pressure of more than 7,000 kPa.  
2) Electronic unit and washing  
machine housing  
– Sump  
Any leaking water is collected in a  
sump in the base of the machine. A  
float switches off the safety valves,  
preventing any more water flowing  
into the machine and water in the  
suds container is pumped away.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Connection to the water  
supply  
In order to protect the water inlet  
valve, the two dirt filters - one in the  
open end of the inlet hose, one at  
the inlet point in the machine - must  
not be removed.  
The machine should be connected to a  
mains water supply in accordance with  
local and national safety regulations.  
The German authorities do not require it  
to have a non-return valve as the  
Extension hose  
washing machine has been designed  
to comply with DIN regulations.  
– Longer hoses 2.5 or 4.0 m in length  
are available from your Miele dealer  
or the Miele Spare Parts Department  
as optional extras.  
The machine is designed to operate  
with a flow pressure of between  
100 kPa and 1,000 kPa. If it is higher  
than 1,000 kPa it is essential to fit a  
pressure reducing valve.  
Connection to the mains water supply  
should incorporate a mains stopcock  
with 3/4" thread. The stopcock should  
be fitted by a qualified plumber.  
,The connection point is subject  
to mains water pressure. Turn on the  
stopcock slowly and check for leaks.  
Correct the position of the washer  
and union if appropriate.  
The washing machine is not suitable  
for connection to a hot water supply  
and connection to a household  
water softener is not recommended.  
Maintenance and care  
Only use a genuine Miele hose should  
you ever need a replacement or  
extension. These are tested to  
withstand pressure of at least  
7,000 kPa.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Connection to the drainage  
system  
Please note:  
The machine drains via a drain pump  
with a delivery head of 1 metre*. The  
drain hose must not be kinked as this  
restricts drainage. The swivel elbow at  
the end of the hose can be turned in  
either direction, or can be detached if  
required, with a sharp twist and pull.  
If required, the drain hose can be  
extended to a length of 5 m. The  
necessary parts can purchased from  
the Miele Spare Parts Department or  
your Miele dealer.  
aAdapter  
* For a delivery head of more than 1 m  
(up to a max. of 1.8 m) a replacement  
drain pump will need to be fitted.  
Please contact the Miele Spare Parts  
Department or your Miele Dealer.  
bNut  
cHose clip  
dEnd of the hose  
^ Fit adapter a to the sink drain outlet  
using nut b.  
Drain hose connection:  
1. Direct into a sink or basin:  
Please note the following:  
^ Attach the end of the hose d to  
adapter a.  
^ Use a screwdriver to tighten hose  
– Hook the hose over the edge and  
secure.  
clip c up close to the nut.  
– Make sure that the water can drain  
away freely without hindrance.  
Otherwise there is a risk of water  
overflowing or of some of the drained  
water being sucked back into the  
machine.  
2. Connected securely to a plastic  
drain pipe with a rubber nipple.  
There is no need to use a non-return  
valve.  
3. Connected securely to a standpipe.  
4. Connected securely to a floor gully.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Electrical connection U.K.  
Non-rewireable plugs BS 1363  
All electrical work should be carried out The fuse cover must be refitted when  
by a suitably qualified and competent  
person, in strict accordance with  
current national and local safety  
regulations (BS 7671 in the UK).  
changing the fuse, and if the fuse cover  
is lost, the plug must not be used until a  
suitable replacement is obtained. The  
colour of the correct replacement cover  
is that of the coloured insert in the base  
of the plug, or the colour that is  
Ensure power is not supplied to the  
appliance until after installation work  
has been carried out.  
embossed in words on the base of the  
plug (as applicable to the design of  
plug fitted).  
The appliance is supplied with a mains  
cable with moulded plug ready for  
connection to a 230-240V mains  
supply.  
Replacement fuses should be ASTA  
approved to BS 1362 and have the  
correct rating. Replacement fuses and  
fuse covers may be purchased from  
your local electrical supplier.  
Please ensure the connection data  
quoted on the data plate match the  
household mains supply.  
WARNING: THIS APPLIANCE  
MUST BE EARTHED  
Connection should be made via a  
suitable switched socket which is easily  
accessible after installation.  
For extra safety it is advisable to install  
a suitable residual current device  
(RCD). Contact a qualified electrician  
for advice.  
Do not connect via an extension lead.  
Extension leads do not guarantee the  
required safety of the appliance (e.g.  
danger of overheating).  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Consumption data  
Load  
Consumption data  
Water Duration  
Energy  
in kWh  
2.20  
1.05  
0.64  
0.77  
0.45  
0.50  
0.38  
0.20  
0.30  
0.32  
0.52  
0.60  
in litres  
55  
Short  
Normal  
Cottons  
95°C  
60°C  
60°C  
40°C  
40°C  
40°C  
30°C  
30°C  
40°C  
40°C  
40°C  
40°C  
7.0 kg  
7.0 kg  
3.5 kg  
7.0 kg  
3.5 kg  
3.5 kg  
2.0 kg  
2.0 kg  
2.0 kg  
3.5 kg  
5.0 kg  
3.0 kg  
2 h 20 min  
2 h 10 min  
1)  
55  
45  
1 h 12 min  
1)  
2)  
1)  
68  
2 h 10 min  
45  
59 min  
Minimum iron  
Delicates  
55  
1 h 09 min  
1 h 29 min  
59 min  
69  
49 min  
Woollens /  
Proofing  
39  
39 min  
12  
40 min  
Express 20  
Automatic plus  
30  
20 min  
30 min  
62  
1 h 27 min  
1 h 12 min  
Dark garments /  
Denim  
52  
1 h 02 min  
Shirts  
60°C  
60°C  
2.0 kg  
7.0 kg  
0.95  
1.65  
59  
72  
1 h 02 min  
1 h 12 min  
2 h 47 min  
Intensive plus  
Notes for test institutes:  
1)  
EN 60456 test programme  
2)  
Short programme for test institutes; the Short extra option must be selected.  
Consumption data can vary from the nominal values given depending on water  
pressure, water hardness, water inlet temperature, room temperature, type and  
volume of load, fluctuations in the electricity supply and any extra options  
selected.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical data  
Height  
850 mm  
595 mm  
615 mm  
975 mm  
820 mm  
600 mm  
650 mm  
96 kg  
Width  
Depth  
Depth with door open  
Height for building under  
Width for building under  
Depth for building under  
Weight  
Maximum floor load  
Capacity  
1600 Newton (approx. 160 kg)  
7 kg dry laundry  
see data plate  
see data plate  
see data plate  
see "Consumption data"  
100 kPa (1 bar)  
1000 kPa (10 bar)  
1.60 m  
Voltage  
Connected load  
Fuse rating  
Consumption data  
Minimum water flow pressure  
Maximum water flow pressure  
Inlet hose length  
Drain hose length  
Mains connection cable length  
Max. delivery head  
Maximum drainage length  
Test certificates awarded  
1.50 m  
1.60 m  
1.00 m  
5.00 m  
see data plate  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
The option which is currently set will  
The programmable functions are  
used to alter the machine's  
electronics to suit changing  
requirements.  
have a tick L beside it.  
FTurn the programme selector until  
the option you want appears in the  
display.  
Programmable functions can be  
altered at any time.  
GPress the Start/Stop button to  
activate this option.  
To access programmable functions  
To come out of programmable  
functions  
The programmable functions are  
accessed via the Start/Stop button  
and the programme selector.  
HTurn the programme selector until  
Back A appears in the display.  
Before you begin, first ensure that:  
IPress the Start/Stop button.  
– The washing machine is switched off.  
– The machine door is closed properly.  
Language  
!
The display can be set to appear in  
one of several different languages.  
APress the Start/Stop button and keep  
it pressed in whilst carrying out steps  
B to C.  
The flag J after the word Language  
acts as a guide to prevent a language  
which will not be understood from  
being set.  
BPress the jk button in.  
CAs soon as . . .  
Language ! ...  
The language selected is saved to  
memory.  
. . . appears in the display, release  
the Start/Stop button.  
To select a programmable function  
DTurn the programme selector until  
the programmable function you  
require appears in the display.  
EPress the Start/Stop button to confirm  
your selection.  
To alter a programmable function  
You can see the different options  
available for a programmable function  
by turning the programme selector.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Water plus  
Gentle action  
This programmable function is used  
to select the water intake setting for  
the Water plus extra option.  
Activating gentle action reduces the  
drum action and is suitable for  
washing slightly soiled items more  
gently. It should be activated for  
garments with a single bar under the  
care label and for articles which feel  
too hard after they have been dried.  
There are three different options:  
Water +  
(the machine is delivered with this  
option selected)  
Gentle action can be activated for the  
Cottons and the Minimum iron  
programmes.  
The water level is increased in the wash  
and rinse stages.  
The washing machine is delivered with  
the Gentle action setting deactivated.  
Extra rinse  
An extra rinse is introduced.  
Suds cooling  
Water+ & Extra rinse  
When this is activated, additional  
water flows into the drum at the end  
of the main wash to cool the suds  
down. Hot suds can damage plastic  
drainage pipes.  
The water intake is increased in the  
wash and rinse stages and an  
additional rinse is also introduced.  
Suds cooling takes place when  
temperatures of 95°C and 75°C are  
selected.  
Suds cooling should be activated:  
– to prevent the danger of scalding if  
the drain hose is hooked over the  
edge of a sink or basin.  
– where the drainage pipes do not  
comply with DIN 1986.  
The machine is delivered with Suds  
cooling deactivated.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Code  
1
2
5
A code can be used to lock the  
electronics on the washing machine  
to prevent it being used without your  
knowledge.  
^ Press the Start/Stop button.  
The following will appear in the display:  
Code activated  
When the code has been activated, you  
have to enter a code after switching the  
washing machine on. Otherwise the  
washing machine cannot be operated.  
Once the machine is switched off, it  
can only be used again if the code is  
entered.  
Code ...  
To use the washing machine when  
the code is activated  
^ Press the Start/Stop button.  
When the machine is switched on  
To activate the code  
again, the display will request the code.  
Activate  
^ Enter code 125 as described above  
and confirm the entry.  
^ Press the Start/Stop button.  
The washing machine is now unlocked  
and ready for use.  
The display will now request that a  
code is entered.  
To deactivate the code  
To enter the code  
Make sure the washing machine is  
switched off and the door is properly  
closed. Press the Start/Stop button and  
keep it pressed in whilst you press the  
jk button in.  
The code is 125 and cannot be altered.  
O
__ __  
^ Turn the programme selector until the  
first number appears in the display.  
As soon as . . .  
^ Confirm your selection of the number  
O
__ __  
by pressing the Start/Stop button.  
^ Repeat the process until all three  
. . . appears in the display, release  
numbers have been entered.  
the Start/Stop button.  
^ Now enter the code and press the  
Start/Stop button.  
^ Select Code and confirm Deactivate.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Temperature unit  
Keypad tone  
You can chose for the temperature to  
be displayed in  
An audible tone sounds each time a  
button is pressed.  
°C/Celsius or °F/Fahrenheit.  
The machine is delivered with the  
keypad tone deactivated.  
The machine is delivered with  
°C/Celsius as the default setting.  
Brightness  
Buzzer  
There are ten different display  
brightness settings.  
When the buzzer function has been  
activated, an audible tone sounds at  
the end of a programme or when  
Rinse hold is reached.  
The bar chart shows you the setting.  
The machine is delivered with the  
display brightness on setting 5.  
There are two volumes:  
The brightness will change as soon as  
a different setting is chosen.  
Off  
(the machine is delivered with this  
option selected)  
Contrast  
The buzzer is switched off.  
There are ten different display  
contrast settings.  
Normal  
The bar chart shows you the setting.  
The buzzer sounds at the end of a  
programme or when Rinse hold is  
reached.  
The machine is delivered with the  
display contrast on setting 5.  
The contrast will change as soon as a  
different setting is chosen.  
Loud  
The buzzer sounds at maximum volume  
(Loud) at the end of a programme or  
when Rinse hold is reached.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Standby display  
Memory  
To save energy, the display goes out  
and the indicator light for the Start/  
Stop button will start flashing slowly.  
The washing machine will store the  
most recently selected settings  
(programme, temperature, spin  
speed and any extra options) in  
memory once the programme has  
started.  
The display will always go out,  
– if a programme is not selected within  
10 minutes of the machine being  
switched on.  
These settings will appear in the  
display the next time the machine is  
switched on.  
– 10 minutes after the end of a  
programme.  
The machine is delivered with the  
memory function deactivated.  
Pressing one of the buttons switches  
the display back on again.  
Anti-crease  
You can also choose whether you want  
the display to go out 10 minutes after a  
programme has started or to remain  
visible throughout the programme.  
Anti-crease helps prevent creasing if  
laundry is not normally removed  
immediately after the end of a  
programme.  
On  
The drum will turn at intervals for up to  
30 minutes after the programme has  
finished.  
The standby function is switched on.  
When this option is selected, the  
display will go out 10 minutes after a  
programme has started.  
The door can be opened and laundry  
removed at any time during the  
anti-crease phase.  
Not in current prog.  
(the machine is delivered with this  
option selected)  
On  
(the machine is delivered with this  
option selected)  
The standby function is switched off.  
The display will remain visible during a  
programme.  
Anti-crease is activated.  
Off  
Anti-crease is deactivated.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional accessories  
Miele washing machines offer perfect  
care for your laundry and feature a  
wide range of special programmes  
designed to suit the fabric being  
CareCollection  
Miele specialist detergents  
"Outdoor wear"  
washed. Miele have also developed a  
range of specialist CareCollection  
detergents and conditioning products  
to offer you a complete package for  
cleaning and caring for your laundry.  
This specialist detergent will clean your  
water-repellent outerwear with care.  
"Sportswear"  
The Miele CareCollection detergents  
and conditioning products are listed  
below. You can order these and many  
other useful products via the internet at:  
The Miele Sportswear detergent is  
designed to clean sportswear whilst  
taking care of the special microfibres  
used in these garments. It will help to  
neutralise and remove odours whilst  
protecting the colour of the fabric and  
preventing static build-up.  
"Down Items"  
This special-purpose detergent  
All the products can also be ordered  
via the Miele Customer Contact Centre  
(see back cover for contact details).  
contains a mild tenside and has been  
specially formulated to keep down-filled  
items supple and to give them bounce.  
Miele proofing agent  
This special finishing agent reproofs  
garments against wind and water and  
provides a dirt-repellent finish whilst  
retaining elasticity and breathability.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional accessories  
"UltraWhite" detergent  
Liquid detergent "For Delicates"  
This multi-purpose powder detergent  
has excellent stain removal properties  
and is suitable for white and light  
coloured laundry as well as heavily  
soiled coloured items.  
This liquid detergent is ideal for the  
gentle treatment of delicate fabrics,  
such as wool and silk. Its special  
formulation cleans effectively at  
temperatures as low as 20°C, while  
protecting the colour of your delicate  
garments.  
"UltraColor" detergent for coloured  
garments  
Fabric conditioner  
This liquid detergent is particularly  
suitable for cleaning coloured and dark The Miele fabric conditioner will give  
garments. The special formulation  
offers effective stain removal, even at  
low temperatures, while helping to  
prevent colours fading.  
your laundry a fresh, natural fragrance.  
It makes garments soft to handle and  
prevents static build-up during tumble  
drying.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved/1209/W 5740  
M.-Nr. 07 483 960 / 00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Washer Miele Novotronic Washing Machine User Manual
Milan Technology Network Card CCSF30XX 100 User Manual
Multi Tech Systems Fax Machine MVP 800 User Manual
Nady Systems Microphone SCM 900 User Manual
NeumannBerlin Microphone M 49 User Manual
Novatel TV Antenna 42G1215A XT 1 2 User Manual
N Tron Switch 708M12 User Manual
Omega Engineering TV Converter Box DIN 190 User Manual
Panasonic Telephone KXTGA939 User Manual
Panasonic Webcam HX A100 User Manual