Operating instructions
for washing machines
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
en-GB
M.-Nr. 09 844 920
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Spinning ................................................................................................................ 37
Delay start............................................................................................................. 39
To select delay start............................................................................................... 39
To change delay start............................................................................................. 39
Programme chart................................................................................................. 40
Options.................................................................................................................. 45
Extra gentle....................................................................................................... 45
AllergoWash...................................................................................................... 45
Water plus.............................................................................................................. 46
Garment care label symbols ............................................................................... 49
Programme sequence ......................................................................................... 50
Changing the programme sequence ................................................................. 52
Cancelling a programme........................................................................................ 52
Detergent.............................................................................................................. 55
Water softeners...................................................................................................... 55
Miele recommended detergents............................................................................ 56
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Cleaning and care................................................................................................ 60
Cleaning the drum(Hygiene info)............................................................................ 60
Cleaning the detergent dispenser drawer.............................................................. 60
Cleaning the TwinDos system................................................................................ 62
Problem solving guide......................................................................................... 64
The programme does not start .............................................................................. 64
Problems with TwinDos.......................................................................................... 68
General problems with the washing machine........................................................ 69
An unsatisfactory wash result................................................................................ 71
After sales service ............................................................................................... 75
Repairs................................................................................................................... 75
Installation and connection................................................................................. 76
Installation surface................................................................................................. 78
Removing the transit bars...................................................................................... 78
Levelling the machine ............................................................................................ 81
Screwing out and adjusting the feet................................................................. 81
Connection to the drainage system....................................................................... 87
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Technical data ...................................................................................................... 89
Consumption data ............................................................................................... 90
Settings................................................................................................................. 92
Language ............................................................................................................ 93
Detergent/amount.................................................................................................. 93
Total consumption ................................................................................................. 93
Temperature unit .................................................................................................... 94
Memory.................................................................................................................. 95
Reduce temp.......................................................................................................... 96
Water plus.............................................................................................................. 96
Water plus level...................................................................................................... 96
Maximum rinse level .............................................................................................. 96
Suds cooling .......................................................................................................... 97
Anti-crease............................................................................................................. 97
Optional accessories........................................................................................... 98
Detergent ............................................................................................................... 98
Specialist detergents ............................................................................................. 98
Fabric care ............................................................................................................. 99
Additives ................................................................................................................ 99
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing mate‐
rial
The packaging is designed to protect
the washing machine from damage dur‐
ing transportation. The packaging ma‐
terials used are selected from materials
which are environmentally friendly for
disposal and should be recycled.
Disposal of your old machine
Electrical and electronic machines often
contain valuable materials. They also
contain materials which, if handled or
disposed of incorrectly, could be po‐
tentially hazardous to human health and
to the environment. They are, however,
essential for the correct functioning of
your machine. Please do not therefore
dispose of it with your household
waste.
Recycling the packaging reduces the
use of raw materials in the manufactur‐
ing process and also reduces the
amount of waste in landfill sites. Ensure
that any plastic wrappings, bags etc.
are disposed of safely and kept out of
the reach of babies and young children.
Danger of suffocation.
Please dispose of it at your local com‐
munity waste collection / recycling cen‐
tre or contact your Dealer for advice.
Ensure that it presents no danger to
children while being stored for disposal.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This washing machine complies with current safety requirements.
Inappropriate use can, however, lead to personal injury and dam‐
age to property.
To avoid the risk of accidents and damage to the machine, please
read these instructions carefully before using it for the first time.
They contain important information on its safety, use and mainte‐
nance.
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future user.
Correct application
This washing machine is intended for use in domestic households
and similar working and residential environments.
The washing machine is not intended for outdoor use.
It must be used only as a domestic appliance to wash items
which are specified by the manufacturer as being washable on the
wash care label. Miele cannot be held liable for damage resulting
from incorrect or improper use or operation.
The washing machine can only be used by people with reduced
physical, sensory or mental capabilities, or lack of experience or
knowledge, if they are supervised whilst using it or have been shown
how to use it safely and recognise and understand the consequen‐
ces of incorrect operation.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Safety with children
Children under 8 years of age must be kept away from the wash‐
ing machine unless they are constantly supervised.
Children 8 years and older may only use the washing machine un‐
supervised if they have been shown how to use it safely and recog‐
nise and understand the consequences of incorrect operation.
Children must not be allowed to clean or maintain the washing
machine unsupervised.
Please supervise children in the vicinity of the washing machine
and do not let them play with it.
Technical safety
Please observe the instructions in "Installation and connection"
and "Technical data".
Before setting up the washing machine, check it for any externally
visible damage. Do not install or use a damaged machine.
Before connecting the washing machine, ensure that the connec‐
tion data on the data plate (fuse rating, voltage and frequency)
match the mains electricity supply. If in any doubt, consult a quali‐
fied electrician.
Reliable and safe operation of this washing machine can only be
assured if it has been connected to the mains electricity supply.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The electrical safety of this washing machine can only be guaran‐
teed when correctly earthed.
It is essential that this standard safety requirement is met. If in any
doubt, please have the wiring system of the building tested by a
qualified electrician.
Miele cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).
Do not connect the washing machine to the mains electricity sup‐
ply by a multi-socket adapter, extension lead or similar. These do
not guarantee the required safety of the machine (fire hazard due to
the risk of overheating).
Faulty components must only be replaced by genuine Miele origi‐
nal spare parts. Only when these parts are fitted can Miele guaran‐
tee the safety standards of the machine.
The electrical socket must be easily accessible after installation
so that the machine can be disconnected from the electricity supply
if necessary.
Unauthorised repairs could result in unforeseen dangers for the
user, for which the manufacturer cannot accept liability. Repairs
should only be undertaken by a Miele authorised service technician,
otherwise any subsequent damage will not be covered by the guar‐
antee.
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The machine must be isolated from the electricity supply when
cleaning and maintaining the machine and in the event of a fault.
The Miele "Water protection system" protects from water damage
provided the following conditions are met:
– the machine is correctly plumbed in and connected to the elec‐
tricity supply.
– if a fault or damage has been identified, the machine must be ex‐
amined by a competent person before further use, and repaired if
necessary.
The water flow pressure must be at least 100 kPa and should not
exceed 1000 kPa.
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the guarantee.
The machine must not be used in a non-stationary location (e.g.
on a ship).
Do not make any alterations to the machine, unless authorised to
do so by Miele.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct use
Do not install the washing machine in a room where there is a risk
of frost. Frozen hoses may burst or split. The reliability of the elec‐
tronic control unit may be impaired at temperatures below freezing
point.
Before using the machine for the first time, check that the transit
bars at the rear of the machine have been removed (see "Installation
and connection - Removing the transit bars"). During spinning, a
transit bar which is still in place may result in damage to both the
machine and adjacent furniture or appliances.
Turn off the stopcock if the machine is to be left for any length of
time (e.g. holiday), especially if there is no floor drain (gully) in the
immediate vicinity.
Flooding danger.
If hooking the drain hose into a wash basin, check that the water can
drain off quickly enough to prevent the sink from overflowing. Make
sure the drain hose is secure, so that the force of the water flowing
out of the hose does not dislodge it.
Take care to ensure that foreign objects (e.g. nails, pins, coins,
paper clips) do not find their way into the machine with the laundry.
These may damage components of the machine (e.g. suds contain‐
er, drum), which in turn can result in damage to the laundry.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Take care when opening the drum door after using the steam
function. Danger of burning due to escaping steam and the high
temperature of the surface of the drum as well as the porthole glass.
Stand back away from the machine and wait until the steam has dis‐
sipated.
The maximum load for this washing machine is 8 kg (dry weight).
See the "Programme chart" for the maximum recommended loads
for individual programmes.
If the correct amount of detergent is dispensed, the machine
should not need to be descaled. If, however, you do wish to descale
it, only use a proprietary natural citric acid based descaling agent.
Miele recommends using Miele descaling agent which is available to
order online at www.miele-shop.com or from Miele. Strictly observe
the instructions on the packaging.
Textiles which have been pre-treated in solvent based cleaning
agents must be thoroughly rinsed in clean water before being wash‐
ed in the machine.
Do not use solvent based cleaning agents, e.g. those containing
benzine, in this machine, as this may result in damage to component
parts and create toxic fumes. Such agents also pose a fire and ex‐
plosion hazard.
Do not use solvent based cleaning agents, e.g. those containing
benzine, to clean the surfaces of the machine. They can cause dam‐
age to plastic surfaces.
Only use dyes specified by the manufacturer as being suitable for
use in a domestic washing machine. Always observe the manufac‐
turer's instructions carefully.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Colour run and dye removers contain sulphur compounds which
can cause damage such as corrosion. Do not use these products in
this machine.
If detergent comes into contact with the eyes, rinse them thor‐
oughly with lukewarm water immediately. If swallowed, seek medical
assistance immediately and retain the packaging or label for refer‐
ence. Those with skin problems or sensitive skin should avoid their
skin coming into contact with detergent.
Accessories
Accessory parts may only be fitted when expressly approved by
Miele. If other parts are used, guarantee, performance and product
liability claims will be invalidated.
A Miele tumble dryer can be stacked on top of a Miele washing
machine using the appropriate stacking kit (available as an optional
accessory). Please make sure you order the correct one for the Miele
washing machine and Miele tumble dryer.
If installing the machine on a Miele plinth, (available as an optional
accessory, depending on country), please make sure you order the
correct one for this washing machine.
Miele cannot be held liable for damage caused by non-compli‐
ance with these Warning and Safety instructions.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Control panel
a
b
f
Display with sensors
See the next page for more informa‐
tion.
Option buttons
Various options can be added to the
wash programme.
g
h
i
Start/Stop button
Programme selector
For selecting the wash programme.
For starting the programme selected
and cancelling a programme once it
has started.
Optical interface PC
For service technicians.
c
d
e
Temperature button
For selecting the temperature.
button
For switching the washing machine
on and off.
To save energy the washing machine
will switch off automatically 15 mi‐
nutes after the end of the pro‐
gramme/anti-crease phase or after
being switched on if no other selec‐
tion is made.
Spin speed button
For selecting the spin speed.
Delay start button
For selecting delay start.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Programme duration
After the programme has started the
programme duration will appear in the
display in hours and minutes.
If delay start has been selected, the
programme duration will appear at the
end of the delay start time.
Delay start
The delay start time selected will ap‐
pear in the display.
After the programme has started the
delay start time will begin to count
down.
j
k
l
m
n
o
sensor
Scrolls down the list to the next op‐
tion or decreases a value.
Once the delay start time has elapsed,
the estimated programme duration will
appear in the display.
OK button
Confirms the programme selected, a
value set or opens a sub-menu.
sensor
Scrolls up the list to the next option
or increases a value.
Dos sensor
Switches on automatic detergent
dispensing.
Cap sensor
Activates cap dosing via the deter‐
gent dispenser drawer.
EcoFeedback sensor
Provides information about the ener‐
gy and water consumption of the
programme. Please also refer to
"Washing environmentally and eco‐
nomically - EcoFeedback".
Sensors to light up when the dis‐
play can be operated via the sensors.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Standard display
Setting numerical values
The standard display shows the follow‐
ing from left to right:
Start in
00 :00 h
A numerical value is highlighted in
white. Touching the sensor decrea‐
ses the value and touching the sen‐
sor increases it. The OK sensor is used
to activate the value which is currently
in the display.
2:59
1600
– the programme duration
– the selected wash temperature
– the selected spin speed
Exiting a sub-menu
Examples on how to operate
the machine
Select Back to exit a sub-menu.
Scrolling through a list
The arrows in the display indicate
that a list is available.
Language
Touching the sensor scrolls down the
list to the next option and touching the
sensor scrolls up the list to the next
option. The OK sensor is used to acti‐
vate the option which is currently in the
display.
Identifying options selected
Cap
If an option has been activated, this will
be indicated by a tick next to it.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Setting the language
Before using the machine for the
first time ensure that it is correctly in‐
stalled and connected. See "Installa‐
tion and connection". Also check
that the drain filters are securely
tightened to prevent the risk of water
leaks during use.
You will be asked to select the lan‐
guage you want for the display. It is
possible to change the language at any
time via "Settings".
deutsch
This washing machine has undergone
a complete functional test at the fac‐
tory and there will be some residual
water in the drum from this process.
Touch the or sensor until the
language you want appears in the
display.
Confirm your selection of the lan‐
guage by touching the OK sensor.
For safety reasons, spinning is not pos‐
sible until the machine has been pre‐
pared for using for the first time. To ac‐
tivate the spinning function you must
run a wash programme without laundry
and without detergent.
Messages
Two messages about removing the
transit bars and preparing the washing
machine for use will appear in the dis‐
play.
Using detergent could result in an ex‐
cessive build-up of foam.
Confirm the messages with the OK
sensor.
Press the button in.
The welcome screen will light up.
Removing the protective foil
and stickers
Remove
– the protective foil from the door.
– any stickers from the front and the
lid.
Please do not remove any labels
(e.g. the data plate), visible when you
open the door.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Removing the detergent car‐
tridges from the drum
There are two cartridges containing
UltraPhase1 and UltraPhase2 detergent
for automatic detergent dispensing in
Running the first programme
The TwinDos unit needs to be activa‐
ted before running the first pro‐
gramme.
the drum.
Please see "TwinDos".
Reach under the door grip and pull
the door open.
Take the two cartridges out of the
drum.
Shut the door with a gentle swing.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TwinDos
The washing machine has an integrated How TwinDos works
detergent dispensing unit.
Automatic detergent dispensing for a
wash cycle is activated via the Dos
sensor.
The detergent dispensing unit can be
used with
To use the TwinDos function, you need
to specify the following information for
the electronic unit:
1. the Miele 2 Phase System
or
2. any other liquid detergent and/or fab‐
ric conditioner
1. the detergent type and/or fabric
conditioner with which the contain‐
ers are filled.
The Miele 2 Phase System
The Miele 2 Phase System uses a base
detergent (UltraPhase 1) and a deter‐
gent enhancer (UltraPhase 2). In order
to achieve optimum results, the agents
are dispensed separately during the
wash process. The 2 Phase System
cleans both white and coloured textiles
thoroughly. UltraPhase 1 and
UltraPhase 2 single use cartridges are
available to order from Miele or via the
internet at www.miele-shop.com (see
end of this booklet for contact details).
2. the dosage amount of the liquid de‐
tergent or fabric conditioner. The
dosage amount for Miele products is
pre-set at the factory.
Do not fill the containers with any
specialist detergents. Use cap dos‐
ing or the detergent dispenser draw‐
er for these.
Automatic dispensing cannot be selec‐
ted with some programmes, depending
on the detergent present in the TwinDos
system. For example, automatic dis‐
pensing cannot be activated for the
Woollens programme if the Miele 2
Phase System is being used. This pre‐
vents woollen garments being dam‐
aged by a detergent which is not suita‐
ble for washing wool.
Liquid detergent/Fabric conditioner
The washing machine is supplied with
two refillable containers which you can
fill with liquid detergent and/or fabric
conditioner.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TwinDos
Using cartridges
Inserting cartridges/containers
UltraPhase 1 and UltraPhase 2 are
supplied in single use cartridges.
Keep filled containers or car‐
tridges out of the reach of children.
Observe the instructions for use and
warning instructions given by the de‐
tergent manufacturer.
Press the yellow release button (1.)
and pull the container out (2.).
Press the TwinDos container access
panel.
The panel will spring open.
Remove the cap from the cartridge.
Drop the panel down.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TwinDos
Using containers
Take the containers out of the com‐
partments.
Open the yellow stopper and fill the
container with your detergent of
choice.
Close the stopper and push the con‐
tainer back into the compartment.
Make sure that it locks into position.
Tip: Make a note of which detergents
you have filled the containers with so
that you then enter the correct settings
in the electronics later on.
Push the UltraPhase 1 cartridge into
Compartment 1 until it locks into po‐
sition.
The following liquid detergents and/or
fabric conditioners can be used in the
containers:
Remove container 2 and push the
UltraPhase 2 cartridge into Com‐
partment 2 until it locks into position.
– Miele Ultra Color
Keep the containers in a safe place.
They can be used for other types of
detergent.
– Miele wool and delicates detergent
– Miele fabric conditioner
– Universal detergent
– Detergent for coloureds
– Detergent for delicates
– Wool and delicates detergent
– Fabric conditioner
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TwinDos
Settings for UltraPhase 1 and
UltraPhase 2
Open the Settings menu
You have to enter the type of deter‐
gent being used in the Settings menu.
The dosage amounts for UltraPhase 1
and UltraPhase 2 are pre-set for hard‐
ness range II ().
Switch on the washing machine and
wait until the standard display lights
up.
Container 1
Touch the OK sensor.
2:59
1600
Not defined
OK
Use the or sensor to select
UltraPhase 1 and confirm your choice
Touch the and sensors at the
same time until the following appears
in the display:
with the OK sensor.
Dosage amount
60 ml
Language
Tip: If you live in an area with water
hardness levels I () or III (), adjust
the dosage for Miele products accord‐
ing to the information given on the
packaging.
The "Settings" menu has been opened.
Touch the sensor, the following will
appear in the display:
Use the OK sensor to confirm the
dosage amount or use the and
sensors to change the amount.
Dispensing unit
Touch the OK sensor.
The washing machine will automatically
assign UltraPhase 2 to compartment 2.
You just need to confirm or change the
dosage amount.
Detergent / amount
Touch the OK sensor.
Dosage amount
45 ml
Use the OK sensor to confirm the
dosage amount or use the and
sensors to change the amount.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TwinDos
Settings for other types of detergent
The dosage amount for Miele prod‐
ucts is pre-set for water hardness lev‐
el Il ().
Container 1
Touch the OK sensor.
Not defined
Touch the or sensor to select
the type of product being used and
confirm with the OK sensor.
Dosage amount
105 ml
Tip: If you live in an area with water
hardness levels I () or III (), adjust
the dosage for Miele products accord‐
ing to the information given on the
packaging.
Use the OK sensor to confirm the
dosage amount or use the and
sensors to change the amount.
Set compartment 2 as described
above.
When adding universal liquid deter‐
gent or liquid detergent for coloureds
do not load more than 8 kg of laun‐
dry and when adding liquid deter‐
gent for wool and delicates do not
load more than 2.5 kg of laundry.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TwinDos
If the Miele 2 Phase System is being
used, a query about the colour mix of
the items will also appear.
Running the first programme
The TwinDos system needs to be
primed before you can use the wash‐
ing machine.
For whites
To do this you must run a wash pro‐
gramme without laundry.
Confirm the For whites option with the
OK sensor.
Open the stopcock.
Press the Start/Stop button.
Turn the programme selector to Cot‐
tons.
Switch the washing machine off at
the end of the programme.
The following will appear in the display:
The TwinDos unit is now ready for use.
Load
1 - 8 kg
The standard display will then appear:
2:59
1600
Touch the Dos sensor.
The following will appear in the display:
Degree of soiling
The display will change automatically to
the degree of soiling query:
Normal
Select the Heavy degree of soiling
setting with the sensor and con‐
firm your selection with the OK sen‐
sor.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing environmentally and economically
Energy and water consumption
Detergent
– Water consumption and energy us‐
age are determined by the size of the
load.
– For precise dispensing use automatic
detergent dispensing.
– Adjust the dosage to the degree of
soiling of the laundry.
To make the most of your machine,
load the maximum dry load for the
programme you are using.
– Do not exceed the amounts of deter‐
gent recommended by the manufac‐
turer on the packaging.
– When smaller amounts of laundry are
washed, the automatic load recogni‐
tion system will reduce the amount of
water and energy used.
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
– Use the Express 20 programme for
small, lightly soiled loads.
– Modern detergents make it possible
to wash at lower temperatures (e.g.
20°C). Washing using lower tempera‐
ture settings will save energy.
– To maintain the hygiene of the ma‐
chine, carry out a hot wash (60°C or
above) using powder detergent at
regular intervals. Hygiene info will ap‐
pear in the display to remind you to
carry out a hot wash.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing environmentally and economically
2. Actual consumption
EcoFeedback
Tip: At the end of the programme, be‐
You can call up information about the
energy and water consumption of your
washing machine with the EcoFeed‐
back sensor.
fore opening the door, you can view the
actual amount of energy and water
used by the programme which has just
been run.
The following information will appear in
the display:
Touch the EcoFeedback sensor.
– an estimate of the consumption be‐
fore the programme begins.
Energy
0,9 kWh
Touch the or to switch to the
water consumption display.
– the energy and water consumption to
date during the programme.
– the energy and water consumption of
the programme which has just been
run at the end of the programme.
If the door is opened or the washing
machine switches off automatically
at the end of the programme, the da‐
ta will revert to the estimated con‐
sumption.
1. Estimate
After selecting a programme, touch
the EcoFeedback sensor.
Total consumption setting
– This setting gives a total of the ener‐
gy consumption and water consump‐
tion to date.
The estimated energy consumption lev‐
els will be displayed as a bar chart.
Energy
See "Settings".
Touch the or sensor to change
to the estimated water consumption
levels.
Water
The more bars () visible, the higher the
energy or water consumption.
The estimate will vary depending on the
wash programme, temperature and any
options selected.
The display will change automatically or
you can return to the standard display
by touching the OK sensor.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Prepare the laundry
Tip: Badly soiled areas can be pre-trea‐
ted with liquid detergent, stain remov‐
ers etc. first, following the manufactur‐
er's instructions. With particularly stub‐
born stains ask your dry cleaner for ad‐
vice.
If you use a solvent-based
cleaning agent (e.g. one containing
benzine) to pre-treat a stain, make
sure that any plastic parts (e.g. but‐
tons) are protected, and that the
cleaning agent is rinsed off before
washing the garment in the machine.
Empty all pockets.
Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage
to garments and to components in
the machine.
Do not use solvent-based clean‐
ing agents in or on this machine.
General tips
– Curtains: Remove lead weights first
or place in a laundry bag.
Sort the laundry
Sort the laundry by colour and by
care label. Most garments have a tex‐
tile care label in the collar or side
seam.
– Underwiring and collar stiffeners: Any
loose wiring in bras, shirt collar stiff‐
eners, etc. should be removed or
sewn in.
Tip: Dark textiles often contain excess
dye and should be washed separately
several times before being included in a
mixed load. Always wash whites and
coloureds separately.
– Close any zips, attach velcro fasten‐
ers, fasten hooks and eyes etc. be‐
fore washing.
– Fasten duvet covers, pillow cases
etc. to prevent small items from being
rolled up inside them.
Pre-treat stains
Badly soiled areas, stains etc. should
be cleaned as soon as possible, pref‐
erably whilst still fresh. Spillages
should be carefully dabbed off using
a soft, colourfast cloth. Do not rub.
Do not wash any items in this washing
machine which are specified by the
manufacturer as not washable on the
care label ( symbol).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select a programme
B. Selecting a programme via the
programme selector at the "Further
programmes" setting and the dis‐
play:
Switch on the washing ma‐
chine
Press the button.
Programme selection
A. Selecting a programme via the
programme selector:
Turn the programme selector to the
Further programmes setting.
The following will appear in the display:
Turn the programme selector to the
required programme.
Automatic plus
Touch the or sensor until the
programme you want appears in the
display.
The load for the programme selected
will appear in the display. This will then
be replaced by the standard display.
Confirm the programme with the OK
sensor.
The load for the relevant programme
will appear in the display. Pre-set pro‐
gramme parameters will be displayed
depending on the programme selected.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Load the washing machine
Open the door
Close the door
Reach under the door grip and pull
the door open.
Make sure that no items are caught
between the door and the seal.
Unfold the laundry and load loosely
into the drum.
Mixing both large and small items
gives better wash results and also
helps distribute the load evenly during
spinning.
Please note the maximum load for the
different wash programmes. The rele‐
vant programme load is always shown
in the display when you select a pro‐
gramme.
Shut the door with a gentle swing.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this reduces cleaning efficiency and
causes creases.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select programme settings
Degree of soiling
Lightly soiled
No visible dirt or stains. Possibly slight
body odour.
The degree of soiling cannot be selec‐
ted for some programmes. These pro‐
grammes are designed for normally
soiled laundry.
Tip: You can alter the default setting for
the degree of soiling or switch off the
degree of soiling query in Settings (see
"Settings - Degree of soiling").
Normally soiled
Visibly dirty and/or just a few slight
stains.
Heavily soiled
Soiling and/or stains clearly visible.
Select a temperature
The following will appear in the display:
You can alter the pre-set temperature
of a wash programme.
Degree of soiling
Press the Temperature button.
The display will change automatically to
the degree of soiling query:
The following will appear in the display:
Temperature
°C
Normal
Set the temperature you want with
the and sensors and confirm
your selection with the OK sensor.
Set the degree of soiling with the
and sensors and confirm your se‐
lection with the OK sensor.
The following parameters will change
depending on the degree of soiling se‐
lected:
– the detergent dosage amount with
automatic detergent dispensing
– with the Heavy degree of soiling set‐
ting, a pre-wash will be carried out
automatically for some programmes,
see "Options".
– the rinse water level will be adjusted
– the programme durations (with light
soiling the programme duration will
be shorter)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select programme settings
Selecting a spin speed
Switch on delay start (if re‐
quired)
The start of a programme can be de‐
layed from 15 minutes up to 24 hours,
allowing you to make use of night-time
economy electricity rates, for example.
You can alter the pre-set spin speed
of a wash programme.
Press the Spin speed button.
The following will appear in the display:
See "Delay start".
Spin speed
1600
rpm
Set the spin speed you want with the
and sensors and confirm your
selection with the OK sensor.
Select options
Press the button for the option you
want.
The indicator light in the button will
come on.
Not all options are suitable for use
with every programme. You can only
select options which are compatible
with the programme being used.
See "Options".
31
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Add detergent
There are several options for adding de‐ Liquid detergent/Fabric conditioner
tergent.
The most suitable agent will appear in
the display with a tick () beside it.
TwinDos
If both the agents present in the con‐
tainers are suitable (e.g. detergent for
coloureds and fabric conditioner) then
both agents will be selected.
Depending on which agents have been
added in Compartments 1 and 2:
Miele 2 Phase System
The optimum amount of UltraPhase1
and UltraPhase2 will be dispensed au‐
tomatically according to the colour mix
of the load.
Both agents
Confirm the option displayed with the
OK button or select another deter‐
gent or fabric conditioner with the
and sensors.
Press the Dos sensor.
Depending on the programme selected,
the following will appear in the display:
Detergent and/or fabric conditioner will
now be dispensed in accordance with
the wash cycle.
For whites
Use the and sensors to select
the dosage mix (for whites or for col‐
oureds) and confirm your selection
with the OK sensor.
Adding stain remover
There are two options for adding stain
remover in addition to using the auto‐
matic dispensing system:
Base detergent and detergent en‐
hancer will be dispensed in the appro‐
priate dosage mix at the ideal time
during the wash cycle.
– Use cap dosing.
– Add the stain remover to the
compartment.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Add detergent
Detergent dispenser drawer
Too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to laundry.
– Limescale deposits on the heater ele‐
ments.
Too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
Pull out the detergent dispenser
drawer and add detergent to the
compartments as follows:
– High water consumption (an addi‐
tional rinse cycle will automatically
switch in).
Detergent for the pre-wash (divide the
total recommended amount as follows:
– A burden to the environment.
add 1/3 to compartment and 2/3 to
compartment )
Detergent for the main wash
/
Fabric conditioner, liquid starch or cap‐
sules.
See "Detergent" for further information.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Add detergent
CapDosing
Inserting a capsule
Three different types of capsule are
available:
Open the detergent dispenser draw‐
er.
= Fabric care (e.g. fabric condi‐
tioner, proofing agent)
= Additives (e.g. detergent en‐
hancers)
= Detergent (for the main wash
only)
Each capsule contains the correct
amount for one wash cycle.
You can order the capsules online at
www.miele-shop.com or from Miele
(see the end of this booklet for contact
details).
Open the lid of the / compart‐
ment.
Keep capsules out of the reach
of children.
Activating CapDosing
Touch the Cap sensor.
The first type of capsule which can be
selected for the programme will appear
in the display.
Cap
Press the capsule in firmly.
Select the type of capsule you want
with the and sensors and con‐
firm your selection with the OK sen‐
sor.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Add detergent
Deactivating/changing CapDosing
Touch the Cap sensor and follow
the instructions in the display.
If a capsule is being used, fabric
conditioner cannot be added to the
compartment at the same time,
as water intake into the compart‐
ment when using CapDosing is sole‐
ly through the capsule.
Close the lid and press it firmly shut.
Close the detergent dispenser draw‐
er.
The capsule is opened by the act of
inserting it in the detergent dispenser
drawer. The contents can run out of
the capsule if you then remove it
from the drawer before it is used.
In this case, dispose of the capsule
and do not re-use it.
The wash programme will dispense the
contents of the capsule at the correct
time.
Remove the empty capsule at the
end of the programme.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Start the programme - the end of a programme
Start the programme
Press the flashing Start/Stop button.
The door will lock (the will appear in
the display to show this) and the pro‐
gramme will start.
If a delay start time has been selected,
then this will count down in the display.
At the end of the delay start time or im‐
mediately after the programme has
started (if no delay start time has been
selected), the programme duration will
appear in the display.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
The programme sequence is also
shown in the display. The washing ma‐
chine lets you know which section of
the programme has been reached.
Switch the washing machine off with
the button.
Close the door. Otherwise there is a
danger of objects being placed inad‐
vertently in the drum. If these re‐
mained unnoticed and were washed
in the next load, they could damage
the laundry.
At the end of a programme
The door is still locked during the anti-
crease phase and the following will ap‐
pear alternately in the display:
Anti-crease/Finish
If applicable, remove the used capsu‐
le from the detergent dispensing
drawer.
and
Press Start/Stop
Press the Start/Stop button. This will
unlock the door.
Pull open the door.
Remove the laundry.
Check that all items have been re‐
moved from the drum. Items left in
the drum could discolour other items
in the next wash or become discol‐
oured themselves.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Spinning
Final spin speed
Final spin speed in the pro‐
gramme
When a programme is selected the op‐
timum spin speed for that programme
will appear in the display. For pro‐
grammes marked with a * in the chart,
the optimum spin speed is not the max‐
imum spin speed.
Programme
Cottons
rpm
1600
1200
900
Minimum iron
Delicates
1200*
600*
1400
1200
800
Woollens
Silks
You can reduce the final spin speed.
Automatic plus
Down duvets
Outerwear
However, you cannot select a final spin
speed higher than that shown in the
chart.
Proofing
1000
1200
1600*
900
Sportswear
Rinse and interim spin
Separate rinse / Starch
Maintenance wash
QuickPower wash
Express 20
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the in‐
terim spin speed. If a spin speed of less
than 700 rpm is selected for the Cot‐
tons programme, an additional rinse is
introduced.
1600*
1200
900
Shirts
Dark garments / Denim
Drain / Spin
900
1600
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Spinning
To omit the final spin (Rinse
hold)
Use the Spin speed button to select
the setting (Rinse hold). The laun‐
dry is not spun after the final rinse
and remains in the final rinse water.
This helps prevent creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
– To end the programme:
Use the Spin speed button to select
the 0 rpm setting (Without spin) and
press the Start/Stop button.
The water will drain away.
To omit rinse and interim spin
and the final spin
Press the Spin speed button.
Select the 0 rpm setting.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional
rinse is introduced with this setting.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Delay start
With delay start you can choose when
you want the programme to start. You
can delay the start of the programme
from 15 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
To change delay start
You can change delay start at any time.
Press the Delay start button.
Change the time
Touch the OK sensor.
To select delay start
Press the Delay start button.
Start in
05 :29 h
The following will appear in the display:
Now enter the time you want.
Start in
00 :00 h
To cancel delay start and begin
the programme straight away
Press the Delay start button.
Use the and sensors to enter
the hour and confirm your entry with
the OK sensor.
Change the time
The display will change:
Touch the sensor.
Start in
05: 00 h
Start immediately
Use the and sensors to enter
the minutes and confirm your entry
with the OK sensor.
Touch the OK sensor. The wash pro‐
gramme will start immediately.
Tip: The values will count upwards and
downwards automatically if you touch
the or sensor continuously.
To begin delay start
Press the Start/Stop button to begin
delay start and the wash programme.
The following will appear in the display:
Start in
05: 00 h
When the delay start time has elapsed,
the programme will begin and the dis‐
play will show the programme duration
and the programme sequence.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Cottons
cold to 90°C
Max. load 8.0 kg
Use for
Cotton, linen or cotton mix fabric, e.g. table linen, towelling, under‐
wear, T-shirts etc.
Note
The settings 60°/40°C differ from / as follows:
– Shorter programme durations
– Longer temperature holding times
– Higher energy consumption
Where particularly high levels of hygiene are required please select a
temperature of 60°C or higher.
Cottons
Use for
Notes
Max. load 8.0 kg
/
Normally soiled cotton garments.
– These settings are the most efficient in terms of energy and water
consumption for washing cottons.
– With the actual wash temperature reached will be lower than
60°C although the wash performance is the same as with the
standard Cottons 60°C programme.
Note for test institutes:
The test programme conforms to EN 60456 and the energy label to Directive
1061/2010.
Minimum iron
cold to 60°C
Max. load 4.0 kg
Use for
Note
Synthetic, mixed fibre and easy care cotton.
Reduce the spin speed for fabric which creases easily.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Delicates
cold to 60°C
Max. load 3.0 kg
Use for
Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.
Curtains, including net curtains, specified as machine-washable by
the manufacturer.
Notes
– Dust in curtains usually makes a programme with pre-wash advis‐
able. Select the Heavy setting for the degree of soiling so that a
pre-wash will be carried out.
– Deselect the spin for items which crease easily.
cold to 40°C
Max. load 2.0 kg
Woollens
Use for
Machine-washable or hand-washable wool or wool blend fabric. If
the care label does not specify a temperature, wash using the cold
setting.
Note
Reduce the spin speed for items which crease easily.
cold to 30°C
Max. load 1.0 kg
Silks
Use for
Note
Silks and other handwashable fabric with no wool content.
Place tights, bras etc. in a laundry bag.
Automatic plus
cold to 40°C
Max. 6.0 kg
Use for
Mixed loads of garments suitable for the Cottons and Minimum iron
programmes.
Note
The wash parameters (e.g. water level, wash rhythm and spin
speed) are adjusted automatically in this programme to ensure the
best possible care and wash result for each item.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Down duvets
cold to 60°C
Max. load 2.5 kg
1 down duvet 2.20 m x 2.00 m
Use for
Notes
Quilts, duvets and pillows with feather or down filling.
– Remove air from the items before washing to prevent an exces‐
sive build-up of foam. To do this either push the items into a nar‐
row laundry bag to compress them or tie the items together with a
washable strap.
– Observe the instructions on the wash care label.
Outerwear
cold to 40°C
Max. load 2.5 kg
Use for
Performance outerwear (e.g. jackets and trousers) made from mem‐
brane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®
etc.
Notes
– Zip up or close jackets before washing.
– Do not use fabric conditioner.
– If wished, these garments can also be re-proofed using the Proof‐
ing programme. Proofing should not be done every time the gar‐
ment is washed.
Proofing
40°C
Max. load 2.5 kg
Use for
Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Notes
– The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards ei‐
ther in a tumble dryer or by ironing.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Sportswear
cold to 60°C
Max. load 3.0 kg
Use for
Sportswear such as singlets and leggings as well as microfibre and
fleece garments.
Notes
– Do not use fabric conditioner.
– Observe the manufacturer's care label.
Separate rinse / Starch
Max. load 8.0 kg
Use for
– Rinsing handwashed items.
– Starching table cloths, serviettes and workwear.
Notes
– Reduce the spin speed for items which crease easily.
– The laundry should be washed but not treated with fabric condi‐
tioner.
– Items will be rinsed very effectively using two rinse cycles by acti‐
vating the Water plus option.
Maintenance wash
75°C
Empty
With frequent washing at low temperatures there is a danger of a build-up of
bacteria in the washing machine.
Cleaning the washing machine will significantly reduce bacteria, fungus and bio‐
film and prevent the build-up of unpleasant odours.
Notes
– Optimum results can be achieved by using Miele machine cleaner.
Alternatively, a universal powder detergent can be used.
– Dispense the machine cleaner or universal powder via the deter‐
gent dispenser drawer.
– Do not load any laundry. The drum must be empty for the mainte‐
nance wash.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
QuickPower wash
60°C – 40°C
Max. load 5.0 kg
Use for
Normally soiled garments which are also suitable for washing in the
Cottons programme.
Note
– A special saturation process and wash rhythm ensure that the
laundry is cleaned particularly quickly and thoroughly.
Express 20
cold to 40°C
Max. load 3.5 kg
Use for
Cotton garments that have hardly been worn or are only very lightly
soiled.
Note
The Short option is activated automatically.
Shirts
Use for
Notes
cold to 60°C
Max. load 2.0 kg
Shirts and blouses made of cotton and mixed fibre.
– Pre-treat soiled cuffs and collars if necessary.
– Wash silk shirts and blouses in the Silks programme.
Dark garments /
Denim
cold to 60°C
Max. load 3.0 kg
Use for
Notes
Black and dark items made of cotton, mixed fibre or denim.
– Wash inside out.
– Denim often contains excess dye and may run during the first few
washes. Wash light and dark coloured items separately.
Drain / Spin
–
Notes
– Drain only: Select 0 rpm for the spin speed.
– Make sure you select the appropriate spin speed.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Options are selected and deselected
via the relevant buttons and the display.
ECO
This option reduces energy consump‐
tion whilst maintaining cleaning efficien‐
cy. This is achieved by increasing the
wash duration and at the same time re‐
ducing the wash temperature selected.
Extra gentle
This option decreases mechanical ac‐
tion in order to reduce creasing. The
laundry also undergoes a smoothing
process at the end of the programme.
Extra quiet
This option reduces noise levels during
the programme. Use this if you want to
wash during quiet periods (for instance
when children are sleeping). The ma‐
chine will activate the "Rinse hold" op‐
tion and not spin. The programme dura‐
tion is longer.
Press the button for the option you
want.
The relevant button will light up.
Not all options are suitable for use with
every programme.
You can only select options which are
compatible with the programme being
used.
AllergoWash
This option should be used where high
standards of hygiene are required. More
energy is used to lengthen temperature
holding times and more water is used
to increase rinsing efficiency.
ProgrammeManager
The ProgrammeManager option can be
used to customise the washing pro‐
grammes to suit your requirements.
Not all ProgrammeManager options
are suitable for use with every pro‐
gramme. Please refer to the "Wash
programme chart - ProgrammeMan‐
ager" for a list of suitable pro‐
grammes.
Intensive
For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency is in‐
creased through more intense mechani‐
cal action and the application of more
heat energy.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will give a bet‐
ter result. Please note the load informa‐
tion in the display. Small loads give a
better result.
The garments must be suitable for dry‐
ing in a tumble dryer and suitable
for ironing .
Short
Use this option for light soiling with no
visible staining.
The wash duration is reduced.
Water plus
The water level in the wash and rinse
stages is increased and a second rinse
is carried out in the "Separate rinse /
Starch" programme.
You can select other functions for the
Water plus button. These are described
in "Settings".
Stains
In order to clean stained laundry more
effectively, you can choose between 7
different types of stain. The wash pro‐
gramme will then adapt to the type of
stain selected. You can select one stain
per wash cycle.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Wash programme chart - ProgrammeManager
ProgrammeManager cannot be selected with programmes which are not listed in
the chart below.
Intensive
ECO
Extra
gentle
Extra
quiet
Allergo-
Wash
Cottons
X
X
X
–
X
X
X
–
X
X
X
–
X
X
X
X
X
X
–
X
X
X
–
Minimum iron
Delicates
Woollens
Silks
–
–
–
–
Automatic plus
Down duvets
Outerwear
X
X
X
–
X
X
X
–
X
X
X
–
X
X
X
–
X
X
X
X
X
X
X
Proofing
Sportswear
Separate rinse / Starch
Express 20
X
–
X
–
X
–
X
–
–
–
–
–
Shirts
X
X
X
X
X
X
X
X
Dark garments / Denim
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
The following options can be selected in addition to the pro‐
gramme:
None of the options can be selected with programmes which are not listed in the
chart below.
Pre-wash1)
Pre-
ironing
Short
Water
plus
Stains
Cottons
X
X
X
X
X
X
X
–
X
X
X
X
–
X
X
X
–
X
X
X
–
X
X
X
X
–
Minimum iron
Delicates
Automatic plus
Down duvets
Outerwear
–
X
X
X
X
–
–
X
X
–
X
X
–
Sportswear
–
Separate rinse / Starch
QuickPower wash
Express 20
–
–
X
X
–
–
X2)
X
–
–
–
X2)
X
Shirts
X
X
X
X
X
X
Dark garments /
Denim
X
X = Can be selected
– = Cannot be selected
1)
= Activated automatically when the Heavy degree of soiling setting is
selected
2)
= Can be deselected
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Garment care label symbols
Drying
Washing
The number of dots indicates the dry‐
ing temperature
The figure quoted in the bucket is the
maximum temperature the garment
can be washed at. The number of
bars under the symbol indicates the
level of agitation permitted.
Normal temperature
Low temperature
Do not tumble dry
No bar under the symbol:
= normal agitation
Ironing
One bar under the symbol:
= reduced agitation
The number of dots indicates the iron‐
ing temperature
Two bars under the symbol:
= much reduced agitation
Hot iron (max. sole plate temp.
approx. 200°C)
Hand wash (if no temperature is
specified, use the lowest tem‐
perature or cold)
Medium hot iron (max. sole
plate temp. approx. 150°C)
Cool iron (max. sole plate temp.
approx. 110°C).
Do not wash
Do not steam iron garments
carrying this symbol as this
could cause irreversible dam‐
age.
Programme selection examples
Programme
Garment care la‐
bel symbols
Cottons
Do not iron
Professional cleaning
Minimum iron
Delicates
Dry clean only. The letters indi‐
cate the type of cleaning agent
required.
Woollens
Silks
Professional Wet Clean only
Do not dry clean
Express 20
Automatic plus
Bleaching
Any oxidising bleaching agent
can be used
Only use an oxygen based
bleach or a non-chlorine bleach
Do not bleach
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Main wash
Rinses
Spinning
Water
level
Wash
rhythm
Water
level
Rinses
2-51)2)3)
2-42)3)
Cottons
Minimum iron
Delicates
2-42)3)
2
Woollens
2-33)
2-42)3)
3-43)
Silks
Automatic plus
Down duvets
Outerwear
3-43)
1
Proofing
–
2-33)
Sportswear
0-15)
Separate rinse / Starch
Maintenance wash
QuickPower wash
Express 20
3
1
1
3-43)
Shirts
3-52)3)
–
Dark garments / Denim
Drain / Spin
–
–
–
Please see the next page for a description of the symbols.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Special features in the pro‐
gramme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens programme.
The door can be opened at any time
during the anti-crease phase.
= Low water level
= Medium water level
= High water level
= Intensive rhythm
= Normal rhythm
= Sensitive rhythm
= Ultra sensitive rhythm
= Handwash rhythm
= Carried out
1) A second rinse is carried out when a
temperature of or above is se‐
lected. A third rinse is carried out
when a temperature below is
selected.
–
= Not carried out
The washing machine has fully elec‐
tronic controls with automatic load rec‐
ognition. It takes in the right amount of
water required for the programme de‐
pending on the amount of laundry and
its absorbency rate.
2) An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
The programme sequences shown in
the chart are based on the standard
programme with a full load.
– the spin speed has been deselected
3) An additional rinse is carried out if:
The washing machine programme se‐
quence display shows which stage of
the programme has been reached.
– the Water plus option is selected and
the Extra rinse or Water + and Extra
rinse setting has been activated for
the Water plus option in Settings.
4) Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate down filled items.
Subsequent water intake for the main
wash is through compartment .
5) An additional rinse is carried out if:
the Water plus option is selected.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Cancelling a programme
Interrupting a programme
You can cancel a programme at any
time after it has started:
Switch the washing machine off with
the button.
Press the Start/Stop button.
Switch the washing machine back on
with the button to continue with
the same programme.
The following will appear in the display:
Cancel programme
Changing a programme
After the start of a programme it is no
longer possible to select a different pro‐
gramme.
Touch the OK sensor.
The suds will be pumped away. The fol‐
lowing will appear in the display:
Temperature
Prog. cancelled
With the exception of the Cottons pro‐
gramme, it is possible to select a differ‐
ent temperature up to 5 minutes after
the programme has started.
Pull open the door.
Remove the laundry.
Press the Temperature button.
If you want to select a different pro‐
gramme
Use the , and OK sensors to
change the temperature.
Close the door.
Spin speed
Select the programme you want.
It is possible to change the spin speed
up until the final spin begins.
Add detergent to the detergent dis‐
penser drawer, if necessary.
Press the Spin speed button.
Press the Start/Stop button.
Use the , and OK sensors to
change the spin speed.
The new programme will begin.
Options
It is possible to select or deselect the
Short and Water plus options up to 5
minutes after the programme has star‐
ted.
Tip: It is not possible to make any
changes to the programme or to cancel
it if the safety lock has been activated.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Please note:
Adding or removing laundry af‐
ter the programme has started
Press the Start/Stop button.
Once a programme has started the
washing machine cannot recognise any
adjustment to the load.
The following will appear in the display:
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
Cancel programme
Scroll up the list with the or sen‐
sor to:
The door cannot be opened, if:
– the suds temperature is above 55°C.
Add laundry
– the water is above a certain level.
Touch the OK sensor.
– the programme has reached the Spin
stage.
If this message does not appear in the
display then it is no longer possible to
add or remove items of laundry.
If you want to open the door when the
above conditions are present you will
need to cancel the programme.
The programme will stop and the door
will unlock.
The safety lock will remain activated if
the temperature in the drum is above
55°C. The lock will not deactivate until
the temperature has dropped to below
55°C.
Pull open the door.
Add or remove items.
Close the door.
Press the Start/Stop button.
The programme will continue.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
To deactivate the safety lock
Safety lock
Proceed as for activating the safety
The safety lock prevents the tempera‐
ture, spin speed or options being al‐
tered during a wash programme.
lock.
The following will appear in the display:
To activate the safety lock
Deactivate lock
Press the Start/Stop button.
Touch the OK sensor.
The following will appear in the display:
The safety lock is now deactivated.
Cancel programme
Scroll up the list with the or sen‐
sor to:
Activate safety lock
Touch the OK sensor.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The correct detergent
Dispensing aids
All detergents produced for automatic
washing machines are suitable. Follow
the manufacturer's instructions and
dosage recommendations on the pack‐
aging.
Use dispensing aids, (e.g. balls) if these
are supplied with the detergent, partic‐
ularly when using liquid detergent.
Refill packs of detergent
When purchasing detergent buy refill
packs wherever possible. This helps re‐
duce the amount of waste packaging.
The right amount to dispense
will depend on the following:
– the soiling level of the load
Fabric conditioner and liquid
starch
Fabric conditioner
makes garments soft to handle and
helps prevent static cling when tumble
drying.
– the quantity of the laundry
– the water hardness level.
Check with your local water supplier
if you do not know the hardness level
in your area.
Starch
Water softeners
stiffens and gives body to items of
laundry, e.g. shirts, tablecloths and bed
linen.
A water softener can be used to cut
down on the use of detergents in areas
with water hardness levels II and III.
Dispense according to the amount
specified on the packaging. First add
detergent and then the water softener.
You can then use the recommended
amount of detergent for water hardness
level I.
Water hardness levels
Hardness
scale
Hardness level German scale
in mmol/l
°d
I (soft)
II (medium)
III (hard)
0 – 1.5
0 – 8.4
1.5 – 2.5
above 2.5
8.4 – 14
above 14
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Miele recommended detergents
Miele detergents and care products have been specially designed for Miele wash‐
ing machines. They are available to order via the internet at www.miele-shop.com
or from Miele.
Miele
UltraPhase 1 / 2
Miele
Cap
Miele
Cap
Miele
Cap
–
–
Cottons
–
–
–
Minimum iron
Delicates
–
–
–
Woollens
Silks
–
–
–
–
–
Automatic plus
Down duvets
Outerwear
Proofing
–
–
–
–
–
–
–
–
–/–
Sportswear
–
–
Separate rinse /
Starch
–/–
/–
–/–
QuickPower wash
Express 20
Shirts
–
–
–
–
–
–
–
–
Dark garments /
Denim
Recommended
Sport
SilkCare
–
Not recommended
Down
Fabric conditioner
Reproofing
Outdoor
WoolCare
Booster
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Recommended detergents in accordance with Directive
(EU) Nr. 1015/2010
The recommendations apply to the temperature ranges given in the Programme
chart.
Universal
Coloureds
Delicates and
woollens
Specialist
detergent
Cottons
–
–
–
–
–
–
–
–
–
–
–
–
–
Minimum iron
Delicates
–
–
–
Woollens
Silks
–
–
Automatic plus
Down duvets
Outerwear
–
–
–
Sportswear
Maintenance wash
–
2)
–
–
QuickPower wash
Express 20
–
–
–
–
1)
Shirts
–
–
–
1)
Dark garments / Denim
–
1)
Recommended
Liquid detergent
Powder detergent
2)
–
Not recommended
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Manual dispensing
Fabric conditioner and liquid
starch at the end of the pro‐
gramme
You can dispense fabric conditioner ei‐
ther by using automatic dispensing or
via the detergent dispenser compart‐
ment.
Automatic dispensing
One of the automatic dispensing con‐
tainers must be filled with fabric condi‐
tioner.
Touch the Dos sensor.
Add the fabric conditioner or liquid
starch to the compartment or in‐
sert the appropriate capsule. Do not
exceed the maximum level mark.
Activate the appropriate container.
Fabric conditioner will be dispensed in
the last rinse.
The agent will be automatically dis‐
pensed in the last rinse. At the end of
the programme a small amount of water
will remain in the compartment.
If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube regularly.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Colour run and dye removers/dyes
Do not use colour run or dye re‐
movers in this washing machine.
They can cause corrosion in the ma‐
chine.
Dyes suitable for use in domestic wash‐
ing machines can be used. However,
please note that the salt used in the
dyeing process can cause corrosion to
stainless steel components in the ma‐
chine if you dye frequently. Always ob‐
serve the manufacturer's instructions
carefully.
Adding fabric conditioner or liquid
starch separately
Prepare the starch in accordance with
the manufacturer's instructions on the
packaging.
Tip: When adding fabric conditioner
separately, activate the Water plus op‐
tion.
Add fabric conditioner to the com‐
partment or insert the appropriate
capsule.
Add liquid starch to the compart‐
ment and powder or viscous starch
to the compartment.
Select the Separate rinse / Starch
programme.
Change the spin speed if necessary.
Activate the Cap sensor if using a
capsule.
Press the Start/Stop button.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the drum
(Hygiene info)
Cleaning the detergent dis‐
penser drawer
Washing at low temperatures and/or
The pre-wash and main wash compart‐
using liquid detergent can cause bacte‐ ments of the detergent dispenser draw‐
ria and unpleasant odours to build up in er are self-cleaning.
the washing machine. Use the Mainte‐
nance wash programme to clean the
machine. Run this programme regularly
or at the latest when Hygiene info ap‐
pears in the display.
For hygiene reasons, clean the entire
drawer at regular intervals.
External casing and fascia
panel
Disconnect the machine from
the mains electricity supply before
cleaning or maintenance.
The washing machine must not
be hosed down.
Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release button and at the
same time pull the drawer right out of
the machine.
Clean the casing and fascia panel
with a mild non-abrasive cleaning
agent or soap and water using a well
wrung-out cloth. Wipe dry with a soft
cloth.
Clean the drawer with hot water.
The drum can be cleaned with a pro‐
prietary stainless steel cleaning
agent, following the manufacturer's
instructions on the packaging.
Do not use solvents, abrasive
cleaners, glass cleaners or multi-pur‐
pose cleaning agents. These could
damage plastic surfaces and other
parts.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the siphon tube and the
channel
Liquid starch can cause the siphon
to become clogged. Make sure that
you clean the siphon and siphon
tube particularly thoroughly after us‐
ing liquid starch a few times.
Cleaning the detergent dispenser
drawer housing
Clean the siphon.
1. Remove the siphon from the com‐
partment and rinse under hot running
water. Clean the siphon tube at the
same time.
2. Replace the siphon.
Use a bottle brush to remove deter‐
gent residues and limescale from the
jets inside the detergent dispenser
drawer housing.
Clean the fabric conditioner channel
with a brush and hot water.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Touch the sensor until the follow‐
ing appears in the display:
Cleaning the TwinDos system
The washing machine has a cleaning
programme for cleaning the Twin Dos
system containers and the hoses in‐
side the washing machine.
Dispensing unit
Confirm the setting with the OK sen‐
sor.
Miele 2 Phase System cartridges do
not need to be cleaned.
Touch the sensor until the follow‐
ing appears in the display:
Cleaning the containers and hoses
Maintenance
Clean the container or containers and
hoses every time you change brand of
liquid detergent or fabric conditioner
or if the system has not been used for
a long period of time (more than three
months).
Confirm the setting with the OK sen‐
sor.
Container 1
Touch the or sensor until the
If the system has not been used for a
long time the detergent in the hoses
can become viscous.
The hoses could become blocked
and would then need to be cleaned
by a service technician.
container you want appears in the
display and confirm this with the OK
sensor.
Follow the instructions in the display.
After cleaning you can fill one or both
containers with new liquid detergent
and/or fabric conditioner.
Switch on the washing machine and
wait until the standard display lights
up.
Touch the and sensors at the
same time until the following appears
in the display:
Language
The Settings menu is activated.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
First turn off the stopcock.
Cleaning the water inlet filter
Unscrew the inlet hose from the stop‐
cock.
The washing machine has a filter to
protect the water inlet valve. The acces‐
sible filter in the union at the open end
of the inlet hose should be checked ev‐
ery six months or so, or more often if
there are frequent interruptions to the
water supply.
Remove the rubber seal 1 from the
recess.
Using pointed pliers, take hold of the
plastic filter bar 2 and remove it.
Clean the plastic filter.
Put the filter and seal back in the re‐
verse order and reconnect the hose.
Turn on the stopcock and check the
connection is watertight. If water
drips out, tighten the connection.
The filter must be put back in place
after cleaning.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Minor faults in the performance of the washing machine, some of which may result
from incorrect operation, can be put right without contacting the Service Depart‐
ment.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
Repair work to electrical appliances should only be carried out by a suitably
qualified person in strict accordance with current local and national safety regu‐
lations. Repairs and other work by unqualified persons could be dangerous.
The manufacturer cannot be held liable for unauthorised work.
Some of the messages in the display are more than one line long. Touch the or
sensor to read them in full.
The programme does not start
Problem
Cause and remedy
The display remains
dark, and the Start/Stop
button indicator light
does not come on.
There is no power to the machine.
Check whether the mains plug is plugged in and
switched on.
Check whether the fuse or circuit breaker has trip‐
ped.
The washing machine has switched off automatically
to save energy.
Switch it back on with the button.
The display prompts
you to enter a code.
Access via a code has been activated.
Enter the code and confirm the entry. Deactivate
the code if you do not wish this message to ap‐
pear in the display the next time the machine is
switched on.
The following appears
in the display:
The door is not closed properly. The door lock could
not engage.
Service Door lock
Close the door again.
Start the programme again.
If the fault message appears again, contact the
Service Department.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The following fault messages appear in the display and the
programme stops
Problem
Cause and remedy
The water inlet is blocked or restricted.
Water intake See
Check whether the stopcock is opened properly.
Check whether the inlet hose is kinked.
Check whether the water pressure is too low.
The filter in the water inlet is blocked.
Clean the filter.
The water outlet is blocked or restricted.
Drainage See
The drain hose has been fixed too high.
Clean the drain filters and the drain pumps.
The maximum delivery head is 1 m.
The water protection system has reacted.
Close the stopcock.
Call the Service Department.
Service Water-
proof
There is a fault.
Service Fault F
Start the programme again.
If the fault message appears again, contact the
Service Department.
To switch off the fault messages: Switch the washing machine off with the but‐
ton.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The following fault messages appear in the display at the end of
the programme
Problem
Cause and remedy
The pumps are dirty.
Check filter + jets
Clean the pumps as described in "Problem solving
guide - Opening the door in the event of a blocked
drain outlet and/or power failure"
Start the programme again after cleaning the
pumps.
The jet in the top of the door ring is blocked with fluff.
Remove the fluff with your finger. Do not use any
sharp or pointed tools to do this.
Start the programme again after cleaning the jet.
If the fault message appears again, contact the Serv‐
ice Department. The washing machine can still be
used but with reduced functionality.
The smoothing process which the laundry undergoes
at the end of the programme could not be carried out
properly.
Align the washing
machine
Check whether the washing machine is aligned
correctly as described in "Installation and connec‐
tion - Levelling the machine".
Check whether the maximum delivery height of
1 m has been exceeded.
If the fault message appears again, contact the Serv‐
ice Department. The washing machine can still be
used but with reduced functionality.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The following fault messages appear in the display at the end of
the programme
Problem
Cause and remedy
Excessive foam has built up during washing.
Check the amount of detergent dispensed.
With automatic detergent dispensing check the
dosage amount set.
Check dosage
Observe the instructions on the detergent packag‐
ing and the degree of soiling of the laundry.
If necessary, reduce the dosage amount by incre‐
ments of 10%.
A programme using a temperature above 60°C has
not been run for a long time.
Hygiene info
In order to prevent bacteria and unpleasant
odours building up in the machine, run the Mainte‐
nance wash programme using Miele machine
cleaner or powder detergent.
The TwinDos container (or containers) is empty.
Fill the container or containers with liquid deter‐
gent or fabric conditioner or replace the car‐
tridge(s).
Check if the laundry is clean. There may not have
been enough detergent.
Container 1 empty
or
Container 2 empty
or
Cont. 1+2 empty
If necessary, wash the items again.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problems with TwinDos
Problem
Cause and remedy
No detergent and/or
fabric conditioner was
dispensed.
Automatic dispensing has not been activated.
Touch the Dos sensor before running the next
programme.
Automatic dispensing will be activated.
No detergent/fabric conditioner was dispensed even
though automatic dispensing was activated.
Try again.
If detergent is still not dispensed, call the Service
Department.
There are dark specks
in the liquid detergent.
Mould has developed in the detergent.
Pour the liquid detergent out of the container and
then clean the container thoroughly.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems with the washing machine
Problem
Cause and remedy
The machine shakes
during the spin cycle.
The machine feet are not level.
Level the machine and adjust the feet correctly.
The laundry has not
The machine detected an imbalance during the final
been spun properly and spin cycle and reduced the spin speed automatically.
is still wet.
Include both large and small items in the load as
this will give better distribution during spinning.
Strange pump noises
can be heard.
This is not a fault.
These slurping noises occur at the end of the pump
sequence as a normal part of operation.
Large amounts of de‐
tergent residue remain
in the detergent dis‐
penser drawer.
The water pressure is too low.
Clean the water inlet filter.
It may be useful to select the Water plus option.
Powder detergent used in conjunction with water
softeners tends to become sticky.
In future, add washing powder into the dispenser
drawer first, and then add the water softener.
Fabric conditioner is
not completely dis‐
pensed or too much
water remains in the
compartment.
The siphon tube is not correctly positioned or is clog‐
ged.
Clean the siphon, see "Cleaning and care - Clean‐
ing the detergent dispenser drawer".
The display is dark.
The display has switched off automatically to save
energy (Standby mode).
Press a button. Standby comes to an end.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems with the washing machine
Problem
Cause and remedy
At the end of the pro‐
gramme there is still liq‐
uid in the capsule.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
Clean the small pipe.
This is not a fault.
For technical reasons a small amount of water will re‐
main in the capsule.
There is water next to
the capsule in the fabric
conditioner compart‐
ment.
The Cap sensor was not activated or an empty
capsule was not removed at the end of the last pro‐
gramme.
Make sure that you remember to activate the Cap
sensor the next time you insert a capsule.
Remove and then dispose of the empty capsule at
the end of each programme.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
Clean the small pipe.
The display is in a dif‐
ferent language.
A different language has been selected in "Settings,
Language ".
Set the language you want. The flag symbol will
guide you.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
An unsatisfactory wash result
Problem
Cause and remedy
Liquid detergent does
Liquid detergents usually contain no bleaching
not give the required re‐ agents. They do not remove fruit, coffee and tea
sult.
stains.
Use the Miele 2 Phase System. The targeted addi‐
tion of UltraPhase 2 during the wash process re‐
moves stains effectively.
Use a general purpose powder detergent contain‐
ing a bleaching agent.
Grey, greasy particles
cling to washed laun‐
dry.
Insufficient amounts of detergent were used to break
down the particles of grease in heavily soiled laundry.
Use more detergent.
Before washing the next load, run the Mainte‐
nance wash using Miele machine cleaner or a
powder detergent.
White residues which
The detergent contained compounds (zeolites) to aid
look like powder deter‐ water softening which are not soluble in water. These
gent are seen on dark
textiles after washing.
have ended up on the laundry.
Try and brush off the residues with a soft brush
once the laundry is dry.
Wash dark textiles using a detergent which con‐
tains no zeolites. Liquid detergents usually contain
no zeolites.
Use the Dark garments / Denim programme for
dark coloured laundry.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The door will not open
Problem
Cause and remedy
The door cannot be
pulled open during a
programme.
The drum is locked during a programme.
Press the Start/Stop button.
Use the sensor to select Cancel programme or
Add laundry.
The door will unlock and you will be able to pull it
open.
There is still water in the drum and the machine is un‐
able to drain.
Clean the drain filter and the drain pump as de‐
scribed in "Opening the door in the event of a
blocked drain outlet and/or power failure".
The water level in the drum is too high.
Cancel the programme. The water will be pumped
away.
Comfort cooling
For safety reasons the drum door cannot be opened if
the suds temperature is higher than 55°C.
Wait until the temperature in the drum has de‐
creased and the message has gone out in the dis‐
play.
appears in the display
after a programme has
been cancelled.
The following appears
in the display:
Service Door release
The door lock has jammed.
Call the Service Department.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Opening the door in the event
of a blocked drain outlet
and/or power failure
Switch off the washing machine.
Slowly and carefully unscrew the fil‐
ters to let the water out. Be careful
not to release too much water at
once. If the flow of water is too
strong, some water can seep into the
washing machine base and activate
the water protection float switch. This
will prevent the washing machine
from functioning.
Press the drain pump access panel.
The panel will spring open.
Blocked drain outlet
Tighten the drain filters back up again
if you need to interrupt the flow of
water.
If the drain outlet is blocked, a large
quantity of water can remain in the
washing machine.
Once the flow of water ceases:
Caution: If laundry has been
washed at a high temperature, water
draining out of the machine will still
be hot. Danger of scalding!
Procedure for draining the washing
machine
When draining water from the ma‐
chine, do not unscrew the drain fil‐
ters completely or take them right
out.
Place a suitable container, e.g. a
Miele universal oven tray under the
access panel.
Remove the drain filters completely.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Opening the door
Always make sure that the drum
is stationary before reaching in to re‐
move laundry. Reaching into a mov‐
ing drum is extremely dangerous.
Clean them thoroughly.
Remove any foreign objects (e.g. but‐
tons, coins, etc.) and fluff from the fil‐
ter housing. Turn the impellers by
hand to check that they rotate freely.
Use a screwdriver to unlock the door.
Pull open the door.
Replace the drain filters correctly (on
the right and left) and tighten them
securely.
Make sure the drain filters are
securely tightened. Otherwise there
is a risk of water leakage during use.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
Repairs
Optional accessories
In the event of any faults which you
cannot remedy yourself, please con‐
tact:
Optional spare parts and accessories
for this washing machine are available
from your Miele Dealer, the Miele Spare
Parts Department or via the internet at
www.miele-shop.com.
– your Miele Dealer, or
– Miele (Contact details for Miele are
given at the end of this booklet).
Please note that telephone calls may
be monitored and recorded for training
purposes.
When contacting your Dealer or Miele,
please quote the model and serial num‐
ber of your machine, both of which are
shown on the data plate visible above
the porthole glass when the door is
open.
Guarantee: U.K.
In the U.K, the washing machine is
guaranteed for 2 years from the date of
purchase.
In the U.K. you must activate your cov‐
er by calling 0330 160 6640 or register‐
ing online at www.miele.co.uk.
Guarantee: Other countries
For information on the appliance guar‐
antee specific to your country please
contact Miele. See end of this booklet
for contact details.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as descri‐
bed in these instructions.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Front view
a
f
g
Inlet hose with Waterproof system
Door
b
Electrical supply cable
Access to drain filter, drain pump and
emergency release
c
Flexible drain hose (with detachable
h
i
swivel elbow)
Access panel for TwinDos containers
Four height adjustable feet
d
Control panel
e
Detergent dispenser drawer
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Rear view
a
e
Drain hose
Inlet hose with Waterproof system
b
f
Transport clips for electrical supply
Safety caps for transit bars
cable, inlet and drain hoses
g
Transport clips for inlet and drain ho‐
c
Electrical supply cable
ses and for storing transit bars when
not in use
d
Protruding lid for holding when mov‐
ing the machine
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Installation surface
Transporting the washing ma‐
chine to its installation site
To manoeuvre the washing machine out
of its packing case to its installation
site, hold it by the front feet as well as
by the edge of the lid where it protrudes
to the rear of the machine.
A concrete floor is the most suitable in‐
stallation surface for a washing ma‐
chine, being far less prone to vibration
during the spin cycle than wooden
floorboards or a carpeted surface.
Please note:
The machine must be level and se‐
Ensure that the machine feet and
the floor are dry to prevent the ma‐
chine from slipping during the spin
cycle.
curely positioned.
To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
Removing the transit bars
If installing on a wooden joist floor:
We recommend a plywood base at
least 59 x 52 x 3 cm). The base
should span several joists and be
bolted to the joist and not only the
floorboards. Check for the presence
of pipes and cables first.
Tip: If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
If the machine is installed on a
raised plinth, it has to be secured
against slippage during spinning us‐
ing retaining clips (available from
Miele). Otherwise there is the danger
of the machine moving and falling off
the plinth.
To remove the left and right covers
1. Pull on the attached stopper,
2. then use a screwdriver to release the
catches at the top and bottom.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Turn the right-hand transit bar 90°,
then
Using the spanner supplied, turn the
left-hand transit bar 90°, then
pull the transit bar out.
pull the transit bar out.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
To avoid the risk of injury, the
holes for the transit bars must be
covered after the transit bars have
been removed.
Secure the transit bars to the back of
the washing machine. Make sure the
top catch is located above the holder.
The washing machine must not
be moved without the transit bars in
place. Store them as shown or keep
them in a safe place for future use.
They must be re-fitted if the machine
is to be moved again (e.g. when
moving house).
Plug the holes with the plastic caps
as illustrated.
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Levelling the machine
The washing machine must stand per‐
fectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase elec‐
tricity and water consumption and may
cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is deliv‐
ered.
Use a spirit level to check that the
washing machine is standing level.
Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again us‐
ing the spanner supplied until it sits
firmly up against the housing.
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is a danger of the machine
moving about.
Using the spanner supplied turn
counter nut 2 in a clockwise direc‐
tion. Then turn counter nut 2 together
with foot 1 to unscrew.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Building under a continuous work‐
top/ in a kitchen run
Washer-dryer stack
The washing machine can be combined
with a Miele tumble dryer in a washer-
dryer stack. The appropriate "WTV"
stacking kit* to match your dryer is re‐
quired.
Building under kits* must only be in‐
stalled/dismantled by a suitably
qualified fitter in accordance with the
instructions supplied.
All parts marked* are available from
your Dealer or Miele.
– A special building under kit* with a
cover plate to replace the machine lid
is required. It must be fitted by a suit‐
ably qualified fitter to ensure electri‐
cal safety. N.B. If there is space to
push the washing machine under the
worktop without removing the lid, the
building under kit is not necessary.
Otherwise it is essential.
Please note:
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in its final posi‐
tion.
Fitting instructions are supplied with the
conversion kit.
a = at least 2 cm
b = WTV without drawer: 172 cm
WTV with drawer: 181 cm
c = 64 cm
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Inlet hose
The water protection system
– The casing on the inlet hose contains
two solenoid valves , which cut off
the water intake directly at the stop‐
cock. These valves provide two-fold
protection. In the event that one of
the valves is faulty, the other valve
will cut off the water intake.
The Miele water protection system pro‐
tects all parts of the washing machine
from water damage.
The system consists of three main
components:
– the inlet hose
Blocking the water intake at the stop‐
cock means that the inlet hose is on‐
ly under pressure whilst water is be‐
ing taken into the machine. For the
remainder of the time, pressure on
the inlet hose is negligible.
– the electronic unit and drainage and
overflow protection
– the drain hose
The Waterproof System (WPS)
– Protection against the solenoid
valves bursting
The solenoid valves are pressure tes‐
ted to between 7,000 kPa and 10,000
kPa against bursting.
1
– The double-skinned inlet hose has
a pressure-resistant inner hose and a
protective sleeve. Any leaking water
is fed into the sump through this
protective sleeve. A float switch
closes the solenoid valves, prevent‐
ing any more water flowing into the
machine and water in the suds con‐
tainer is pumped away.
2
5
6
4
3
a
Two solenoid valves
b
Double-skinned inlet hose
c
Sump
d
Float switch
e
Electronic unit
f
Drain pump
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
The electronic unit and drainage
and overflow protection
– Drainage protection
Any leaking water is collected in the
sump in the base of the machine.
A float switch closes the solenoid
valves , preventing any more water
from flowing into the machine and
water in the suds container is pum‐
ped away.
– Overflow protection
If the water level exceeds a certain
level, the drain pump switches in
and pumps the excess water away in
a controlled manner.
Should the water level rise repeatedly
in an uncontrolled way, the drain
pump will switch on continuously,
the washing machine will indicate
that there is a fault and a tone will
sound.
Drain hose
The drain hose is protected by a venti‐
lation system which prevents the wash‐
ing machine from being emptied com‐
pletely.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
The washing machine should be con‐
nected to a mains water supply in ac‐
cordance with current local and nation‐
al safety regulations. The German au‐
thorities do not require it to have a non-
return valve as the washing machine
has been designed to comply with DIN
regulations.
Connection to the water sup‐
ply
The casing on the water inlet
hose contains electrical compo‐
nents. It must not be connected in
areas where there is the risk of water
or other liquids reaching it, e.g. bath‐
rooms.
The machine is designed to operate
with a flow pressure of between 100
and 1,000 kPa. If it is higher than 1,000
kPa it is essential to fit a pressure re‐
ducing valve.
Connection to the mains water supply
should incorporate a mains stopcock
with a 3/4" threaded union. The stop‐
cock should be fitted by a qualified
plumber.
The casing on the water inlet hose
must not get wet.
The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
The washing machine is not suitable
for connection to a hot water supply.
The protective sleeve of the hose
must not be damaged or kinked.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Maintenance
Only use a Miele Waterproof system
hose should you need a replacement.
Disconnect the machine from the elec‐
tricity supply before unscrewing the wa‐
terproof system inlet hose from the
stopcock.
In order to protect the water inlet
valve, the dirt filter in the water inlet
valve connection must not be re‐
moved.
Extension hose
A 1.5 metre long (metal) extension hose
is available from your Miele dealer or
the Miele Spare Parts Department as an
optional extra.This hose is tested to
withstand pressures of up to 14,000
kPa and can be used as a flexible ex‐
tension to the water supply. N.B. Using
this hose will render the Water system
safety valve on the inlet hose ineffec‐
tive.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
3. Connected securely to a floor gully.
4. Connected securely to a standpipe.
Please note:
Connection to the drainage
system
The machine drains via a drain pump
with a delivery head of 1 metre*. The
drain hose must not be kinked as this
restricts drainage. The swivel elbow at
the end of the hose can be turned in ei‐
ther direction, or can be detached if re‐
quired, with a sharp twist and pull.
If required, the drain hose can be exten‐
ded to a length of 5 m. The necessary
parts can be purchased from your Miele
Dealer or Miele.
* For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact Miele or your Miele
Dealer for advice. If necessary, the
drain hose can be extended to a length
of 2.5 m. The necessary parts can be
purchased from your Miele Dealer or
Miele.
Adapter
Nut
Hose clip
End of the hose
Fit adapter to the sink drain outlet
using nut .
Drain hose connection:
1. Direct into a sink or basin.
Attach the end of the hose to
adapter .
Please note the following:
– Hook the hose over the edge and
secure.
Use a screwdriver to tighten hose clip
up close to the nut.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the
drained water being sucked back
into the machine.
2. Connected securely to a plastic drain
pipe with a rubber nipple. There is no
need to use a non-return valve.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Non-rewireable plugs BS 1363
Electrical connection U.K.
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until
a suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is em‐
bossed in words on the base of the
plug (as applicable to the design of
plug fitted).
All electrical work should be carried out
by a suitably qualified and competent
person, in strict accordance with cur‐
rent national and local safety regula‐
tions (BS 7671 in the UK).
Ensure power is not supplied to the ap‐
pliance until after installation work has
been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for con‐
nection to a 230-240V mains supply.
Replacement fuses should be ASTA ap‐
proved to BS 1362 and have the cor‐
rect rating. Replacement fuses and fuse
covers may be purchased from your lo‐
cal electrical supplier.
Please ensure the connection data quo‐
ted on the data plate match the house‐
hold mains supply.
Connection should be made via a suita‐
ble switched socket which is easily ac‐
cessible after installation.
WARNING: THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to protect
the machine with a suitable residual
current device (RCD). Contact a quali‐
fied electrician for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
850 mm
Width
596 mm
Depth
636 mm
Depth with door open
Height for building under
Width for building under
Weight
1054 mm
820 (+8/-2) mm
600 mm
Approx. 100 kg
8 kg dry laundry
See data plate
See data plate
See data plate
Capacity
Voltage
Connected load
Fuse rating
Consumption data
Minimum flow pressure
Maximum flow pressure
Inlet hose length
Drain hose length
Mains connection cable length
Delivery head max.
Maximum drainage length
LEDs
See "Consumption data"
100 kPa
1000 kPa
1.60 m
1.50 m
1.60 m
1.00 m
5.00 m
Class 1
Test certificates awarded
See data plate
Power consumption when switched off 0.1 W
Power consumption when not switched 3.0 W
off
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Load
Consumption data
Energy
in kWh
Water
Duration
Residual
moisture
in l
58
58
49
48
46
69
49
39
49
40
35
55
36
30
Cottons
90°C
60°C
60°C
*
*
40°C
40°C
*
40°C
30°C
30°C
40°C
40°C
40°C
8.0 kg
8.0 kg
4.0 kg
8.0 kg
4.0 kg
8.0 kg
4.0 kg
4.0 kg
4.0 kg
3.0 kg
2.0 kg
6.0 kg
5.0 kg
3.5 kg
2.3
2 h 29 min
1 h 59 min
1 h 59 min
2 h 59 min
2 h 59 min
2 h 39 min
2 h 29 min
2 h 59 min
1 h 59 min
1 h 09 min
38 min
50%
50%
50%
44%
44%
46%
46%
44%
30%
–
1.35
1.00
0.80
0.72
0.88
0.68
0.54
0.60
0.40
0.23
0.77
0.90
0.34
Minimum iron
Delicates
–
Woollens
Automatic plus
QuickPower wash
1 h 59 min
59 min
–
–
20 min
–
1)
Express 20
40°C
2.0 kg
0.40
35
1 h 11 min
–
2)
Shirts
Short option activated
1)
2)
Pre-ironing option deactivated
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Note for test institutes
*Test programme in accordance with EN 60456 and energy label with
Directive 1061/2010
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any options selected.
The consumption data shown in the EcoFeedback display can vary from the
consumption data quoted here. The variations arise from component tolerances
and on-site conditions e.g. fluctuations in the pressure of the water supply,
mains voltage and fluctuations in the mains voltage.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Selecting a setting
You can use the settings menu to alter
the machine's electronics to suit
changing requirements.
Touch the or sensor until the
setting you want appears in the dis‐
play.
Settings can be altered at any time.
– The sensor scrolls down the list.
Opening the Settings menu
– The sensor scrolls up the list.
Before you begin, ensure that:
Touch the OK sensor to select the
setting displayed.
– The washing machine is switched on.
– The standard display is showing.
Changing a setting
Touching the sensor will call up the
different options for the setting.
2:59
1600
The option which is selected will have
a tick next to it.
OK
When the option you want shows in
the display touch the OK sensor to
activate it.
Touch the and sensors at the
same time.
Language
Exiting a setting
Touch the or sensor repeatedly
until Back appears in the display.
You are now in the Settings menu.
Touch the OK sensor.
Tip: After a while the display will revert
automatically to the standard display.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Buzzer volume
Language
You can select one of seven different
settings for the buzzer volume.
The display can be set to appear in
one of several different languages.
The settings are represented by a bar
chart. At the lowest setting, the buzzer
is switched off.
The flag after the word Language
acts as a guide to prevent a language
which will not be understood from be‐
ing set.
Keypad tone
The selected language will be stored in
memory.
Each touch of a sensor or press of a
button is confirmed with an audible
tone.
Detergent/amount
For specifying the type of detergent
present in the automatic detergent
dispensing containers.
Factory default setting: the keypad tone
is switched off.
Total consumption
See "TwinDos" for more information.
In this setting you can check the
saved energy and water consumption
values.
Degree of soiling
You can select the default setting for
the degree of soiling or switch off the
degree of soiling query.
Options
– Display
Shows the sum of the energy and the
sum of the water used by the previ‐
ous programmes.
Options
– Default setting
You can choose between the Light,
Normal or Heavy degree of soiling
settings.
– Reset function
The energy consumption and water
consumption totals are reset to zero.
Factory default setting: Normal.
– Query
You can switch the degree of soiling
query on or off.
Factory default setting: On
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Code
Display brightness
The code prevents the washing ma‐
chine being used without your knowl‐
edge.
There are seven different display
brightness settings.
The brightness changes as soon as you
select a different setting.
Options
– Activate
Dark display
The code is 125 and can be activa‐
ted.
When the code has been activated,
you have to enter the code after
switching the washing machine on.
Otherwise the washing machine can‐
not be operated.
To save energy, the display will go out
and the Start/Stop button will flash
slowly.
Options
– On
– Deactivate
The display will go out after 10 mi‐
nutes.
For using the washing machine with‐
out entering the code. This only ap‐
pears if the code has been activated
previously.
– On (not in current programme)
The display will remain on while the
programme is running but will go out
10 minutes after the end of the pro‐
gramme.
– Change
You can enter a code of your own.
– Off
Important. Make a note of your new
code. If you forget the code, the
washing machine will need to be un‐
locked by Miele Service.
The display will remain on.
Factory default setting: the On (not in
current programme) option is selected.
Temperature unit
The temperature can be displayed as
degrees Celsius (°C) or Fahrenheit (°F).
Factory default setting: Celsius (°C).
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Machine switch-off
Pre-wash Cottons
The washing machine will switch off
automatically after the end of the pro‐
gramme/anti-crease phase or after
being switched on if no further selec‐
tion is made.
If you require a longer pre-wash you
can extend the Cottons programme's
standard pre-wash time of 25 minutes
Options
– No increase (Factory default setting)
25 minute pre-wash
Options
– 15 minutes (Factory default setting)
The washing machine will switch it‐
self off after 15 minutes.
– +6 min
31 minute pre-wash
– +9 min
– 20 minutes
34 minute pre-wash
The washing machine will switch it‐
self off after 20 minutes.
– +12 min
37 minute pre-wash
– 30 minutes
The washing machine will switch it‐
self off after 30 minutes.
Gentle action
Activating gentle action reduces the
drum action and is suitable for wash‐
ing slightly soiled items more gently.
Memory
The washing machine will save the
settings (temperature, spin speed and
some of the options) which have been
selected for a programme after the
programme has started.
Gentle action can be activated for the
Cottons and Minimum iron pro‐
grammes.
Factory default setting: Gentle action is
switched off.
When this programme is chosen again,
these saved settings will appear in the
display.
Factory default setting: the Memory
function is switched off.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Reduce temp.
Water plus level
The boiling point for water is lower at
altitudes of more than 1000 m above
sea level. In order to avoid water boil‐
ing, the maximum temperature is re‐
duced to 80°C even when a higher
temperature is selected.
The water level can be increased in 4
stages by activating the Water plus
option.
Stages:
– Normal (Factory default setting)
Factory default setting: the reduce tem‐
perature setting is switched off.
– Plus
– Plus
– Plus
Water plus
You can increase the set amount of
water in the wash programmes.
Maximum rinse level
The water level in the rinse cycle can
be permanently set to the highest val‐
ue.
Options
– Water +
The water level is increased in the
wash and rinse stages.
This function is useful for allergy suffer‐
ers as it achieves an excellent rinse re‐
sult. Water consumption will increase.
– Extra rinse
An extra rinse is carried out.
Factory default setting: the maximum
rinse level setting is switched off.
– Water + and Extra rinse
The water level is increased in the
wash and rinse stages and an extra
rinse is carried out.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Suds cooling
When this is activated, additional wa‐
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a tem‐
perature of 70°C or higher is selected
for the Cottons programme.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where drainage pipes do not comply
with DIN 1986.
Factory default setting: Suds cooling is
switched off.
Anti-crease
The anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
The drum continues to turn at intervals
for up to 30 minutes at the end of the
programme. The door can be opened at
any time.
Factory default setting: anti-crease is
switched on.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Detergent, fabric care, additives and
machine care products are available for
this washing machine. All the products
have been designed for Miele washing
machines.
UltraColor
– liquid detergent for coloureds
– suitable for coloured and dark/black
garments
– protects bright colours from fading
These and many other useful products
can be ordered via the internet at
www.miele-shop.com or from Miele
(see end of this booklet for contact de‐
tails).
– effective stain removal even at low
temperatures
Wool and delicates detergent
– liquid detergent for delicates
– particularly suitable for woollen and
silk garments
– cleans at temperatures as low as
20°C, helps retain the shape of deli‐
cate garments and protect colours
Detergent
UltraPhase 1 and UltraPhase 2
Specialist detergents
Specialist detergents are available as
capsules in convenient single dose
amounts or in a handy bottle.
– universal liquid detergent and deter‐
gent enhancer dispensed as two
components.
– suitable for white and coloured laun‐
dry
Outerwear
– no need to refill as the components
for the TwinDos system are supplied
in single use cartridges.
– liquid detergent for outerwear and
performance clothing
– cleans with care and is gentle on col‐
ours
UltraWhite
– powder detergent
– with lanolin to care for and condition
membrane fabric
– suitable for white and light coloured
laundry as well as heavily soiled cot‐
ton items
Sports
– liquid detergent for sportswear and
fleece garments
– effective stain removal even at low
temperatures
– neutralises unpleasant odours
– retains the shape of the textiles
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Down items
Fabric care
– liquid detergent suitable for pillows,
sleeping bags and down filled items
Fabric care agents are available as cap‐
sules in convenient single dose
amounts or in a handy bottle.
– retains the elasticity of down and
feather filled items
Reproofing agent
– retains the breathability of down filled
items
– for reproofing microfibre garments
e.g. rain coats etc.
– prevents down filling clumping to‐
gether
– retains the breathability of garments
Fabric conditioner
WoolCare
– fresh, natural fragrance
– liquid detergent for woollens and del‐
icates
– makes laundry soft to handle
– with a special wheat protein condi‐
tioning formula
Additives
Booster
– helps prevent pilling
– gentle on colours
– for removing stains
– suitable for white and coloured laun‐
dry
– only available as capsules
SilkCare
– available as capsules in conven‐
ient single dose amounts
– liquid detergent for silks
– with a special silk protein condition‐
ing formula
Machine care products
Machine cleaner
– gentle on colours
– for cleaning the washing machine
thoroughly and effectively
– only available as capsules
– removes grease, bacteria and un‐
pleasant odours
Descaling agent
– removes heavy limescale deposits
– mild and gentle with natural citric
acid
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
United Kingdom
Miele Co. Ltd.
Fairacres, Marcham Road
Abingdon, Oxon, OX14 1TW
Customer Contact Centre Tel: 0330 160 6600
E-mail: [email protected]
Internet: www.miele.co.uk
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana Petroleum
Solaris Dutamas No. 1, Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
1 Gilbert Park Drive, Knoxfield, VIC 3180
Tel: 1300 464 353
New Zealand
Miele New Zealand Limited
IRD 98 463 631
Internet: www.miele.com.au
China
Level 2, 10 College Hill
Freemans Bay, Auckland 1011, NZ
Tel: 0800 464 353
Miele (Shanghai) Trading Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
Internet: www.miele.co.nz
200040 Shanghai, PRC
Tel: +86 21 6157 3500, Fax: +86 21 6157 3511
E-mail: [email protected], Internet: www.miele.cn
Singapore
Miele Pte. Ltd.
163 Penang Road
# 04 - 03 Winsland House II
Singapore 238463
Tel: +65 6735 1191, Fax: +65 6735 1161
E-Mail: [email protected]
Internet: www.miele.sg
Miele (Hong Kong) Limited
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1331, Fax: (852)2610 1013
Email: [email protected]
South Africa
Miele (Pty) Ltd
India
63 Peter Place, Bryanston 2194
P.O. Box 69434, Bryanston 2021
Tel: (011) 875 9000, Fax: (011) 875 9035
E-mail: [email protected]
Internet: www.miele.co.za
Miele India Pvt. Ltd.
Ground Floor, Copia Corporate Suites
Plot No. 9, Jasola
New Delhi - 110025
Tel: 011-46 900 000, Fax: 011-46 900 001
E-mail: [email protected], Internet: www.miele.in
United Arab Emirates
Miele Appliances Ltd.
P.O. Box 11 47 82
Gold & Diamond Park, Sheikh Zayed Road
Building 6 / Offices Nos. 6-214 to 6-220
Dubai
Tel: +971-4-341 84 44
Fax: +971-4-341 88 52
E-Mail: [email protected]
Ireland
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus, Dublin 24
Tel: (01) 461 07 10, Fax: (01) 461 07 97
E-Mail: [email protected], Internet: www.miele.ie
Manufacturer: Miele & Cie. KG
Carl-Miele-Straße 29, 33332 Gütersloh, Germany
Internet: www.miele.ae
100
Download from Www.Somanuals.com. All Manuals Search And Download.
WKH 120 WPS
en-GB
M.-Nr. 09 844 920 / 03
Download from Www.Somanuals.com. All Manuals Search And Download.
|