Operating and installation instructions
Refrigerator with Dynamic cooling
K 14820 SD
K 14820 SD ed/cs
en - GB
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 09 021 160
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Adjusting the interior fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Moving the shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Split shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adjusting the condiment tray/bottle shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Moving the bottle divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Automatic defrost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cleaning the interior and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Appliance door, side panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Ventilation gaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Door seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Metal grille at the back of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Active charcoal filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To change the active charcoal filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Side-by-side installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Climate range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Aligning the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Levelling the appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Appliance dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Changing the door hinging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Aligning the appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Building in the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
aOn/Off sensor
fTemperature display
bDynamic cooling sensor
cSuper cool sensor
g"Cooling" symbol
hSensor for setting a higher
temperature (Y)
dSensor for setting a lower
temperature (X)
iAlarm off sensor
(only visible when the door alarm
sounds)
eSafety lock indicator light
(only visible when Safety lock is
activated)
jChange active charcoal filter
indicator
(only visible when the active
charcoal filter needs to be changed)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
aDynamic cooling fan
bCeiling lighting
cButter and cheese compartment
dEgg tray/Condiment tray
eUniversal container
fAdjustable shelves
gActive charcoal filter holder
hBottle rack
iCondensate channel and
drain hole
jBottle divider
kBottle shelf
lFruit and vegetable containers
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and should be recycled.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
Take care not to damage the pipework
at the back of it before or during
transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained and will not leak out into the
environment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
improper use or operation of the
appliance.
This appliance complies with all
relevant local and national safety
requirements. Improper use can,
however, present a risk of both
personal injury and material
damage.
This appliance is not intended for
~
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless they
are supervised whilst using it, or have
been shown how to use it correctly by a
person responsible for their safety.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before installation and before using
it for the first time. They contain
important notes on the installation,
safety, operation and care of the
appliance.
Safety with children
This appliance is not a toy! To avoid
~
the risk of injury, do not allow children
to play with it or near it, or to play with
the controls. Neither should they be
allowed to swing on the door. Please
supervise young children whilst you are
using it. Older children may only use
the appliance when its operation has
been clearly explained to them and
they are able to use it safely,
Keep these instructions in a safe
place and pass them on to any
future user.
Correct application
This appliance is not designed for
~
recognising the dangers of misuse.
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
– Shops
– Offices and showrooms
– Hostels and guest houses.
This appliance is not intended for
outdoor use.
It must only be used as a domestic
appliance to cool and store food.
Any other usage is not supported by
the manufacturer and could be
dangerous. Miele cannot be held liable
for damage resulting from incorrect or
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
- disconnect from the mains,
- air the room in which the appliance is
located for several minutes and
- contact the Service Department for
advice.
Before setting up the appliance,
~
check it for any externally visible
damage. Do not install and use a
damaged appliance.
A damaged appliance is dangerous.
The more coolant there is in an
~
appliance, the larger the room it should
If the connection cable is faulty it
~
be installed in. In the event of a
must only be replaced by a service
technician authorised by the
manufacturer to protect the user from
danger.
leakage, if the appliance is in a small
room, there is the danger of
combustible gases building up.
For every 8 g of coolant at least 1 m3 of
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
Safe operation of the appliance is
~
only assured if it has been installed and
connected in accordance with these
operating and installation instructions.
This appliance contains the coolant
Before connecting the appliance,
~
~
Isobutane (R600a), a natural gas which
is environmentally friendly. Although it
is flammable, it does not damage the
ozone layer and does not increase the
greenhouse effect. The use of this
coolant has, however, led to a slight
increase in the noise level of the
appliance. In addition to the noise of
the compressor, you might be able to
hear the coolant flowing around the
system. This is unavoidable, but does
not have any adverse effect on the
performance of the appliance. Care
must be taken during transportation
and setting up of the appliance that no
parts of the cooling system are
damaged. Leaking coolant can
damage the eyes.
make sure that the connection data on
the data plate (voltage and connected
load) match the mains electricity
supply.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a qualified
electrician if in any doubt.
Do not connect the appliance to the
~
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
In the event of any damage:
- avoid open flames and anything
which creates a spark,
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The electrical safety of this
The appliance must be isolated from
~
~
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with current local and national isolated from the electricity supply
the electricity supply during installation,
maintenance and repair work.
The appliance is only completely
safety regulations. It is most important
that this basic safety requirement is
present and tested regularly, and
where there is any doubt, the
when:
– it has been switched off at the wall
socket and the plug has been
withdrawn, or
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
– the fuse from the fused spur
connection unit has been withdrawn,
or
– the mains fuse has been
disconnected, or
earthing system (e.g. electric shock).
Installation, maintenance and
~
– the screw-out fuse has been
removed (in countries where this is
applicable).
repairs may only be carried out by a
suitably qualified and competent
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
Faulty components must only be
~
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
While the appliance is under
~
This appliance must not be used in
~
a non-stationary location (e.g. on a
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
ship).
In countries where there are areas
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct use
Do not use defrosting sprays or
~
de-icers, as they might contain
Never store explosive materials in
~
substances which could damage the
plastic parts or which could cause a
build-up of gases and pose a danger to
health.
the appliance or any products
containing propellants (e.g. spray
cans). Thermostats switching on may
produce sparks which could present a
fire hazard. Flammable compounds
could explode.
Do not use any oils or grease on the
~
door seal, as these will cause the seal
to deteriorate and become porous with
time.
Do not operate any electrical
~
equipment (e.g. an electric ice-cream
maker) inside the appliance. Danger of
sparking and explosion.
Do not store cooking oil in the
~
refrigerator door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
If storing alcohol with a high
~
percentage proof, make sure it is tightly
closed and stored upright.
Danger of explosion.
Do not block the ventilation gaps in
~
the appliance as this would impair the
efficiency of the appliance, increase the
electricity consumption and could
cause damage to the appliance.
Observe the "use by" dates given on
~
food to avoid the risk of food poisoning.
Storage times will depend on several
factors, including the freshness and
quality of the food as well as the
The appliance is designed for use
~
within certain climate ranges (ambient
temperature at which it is stored. Follow temperatures), and should not be used
the instructions given on food
manufacturer's packaging on storage
conditions required, as well as the "use
by" date.
outside this range. The climate range
for your appliance is stated on the data
plate inside the appliance.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
will lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
Do not use sharp edged objects to
~
– remove frost and ice,
– separate food which has become
frozen.
Do not use a steam-cleaning
~
appliance to clean this appliance.
Steam could reach the electrical
components and cause a short circuit.
They will damage the evaporator,
causing irreversible damage to the
appliance.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Stainless steel appliances
Do not use sticky notes, transparent
~
adhesive tape, masking tape or other
types of adhesive on the surface of the
door.
These damage the surface, causing it
to lose its dirt repellent protective
coating.
The high-quality surface of the door
~
is supsceptible to scratching.
Even fridge magnets can cause
scratching.
Disposal of your old appliance
Before disposing of an old
~
appliance, first make the door latch or
lock unusable.
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
Be careful not to damage any part of
~
the pipework whilst awaiting disposal,
e.g. by
– puncturing the refrigerant channels
in the evaporator.
– bending any pipework.
– scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and safety instructions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to save energy
Normal energy
Increased energy
consumption
consumption
Installation site
In a ventilated room.
In an enclosed, unventilated room.
In direct sunlight.
Protected from direct sunlight.
Not near to a heat source (radiator, Near to a heat source (radiator,
oven).
oven).
Where the ideal ambient room
temperature is approx. 20°C.
Where there is a high ambient room
temperature.
Do not cover the ventilation gaps
and dust them regularly.
Temperature setting
with a thermostat
which is approximate
(set in stages).
With a medium setting of 2 to 3.
With a high setting: the lower the
temperature in the compartment, the
higher the energy consumption.
Temperature setting
with a thermostat which
is exact to the degree
(digital display).
Larder section 8 to 12 °C
On appliances with winter setting,
please make sure that the winter
setting is switched off when the
ambient temperature is warmer than
16 °C .
Refrigerator section 4 to 5 °C
PerfectFresh zone just above 0 °C
Freezer section -18 °C
Wine storage section 10 to 12 °C
Use
Drawers, shelves and racks
arranged as they were when the
appliance was delivered.
Only open the door when necessary Frequent opening of the door for
and for as short a time as possible. long periods will cause a loss of
coldness.
Store food in an organised way.
Searching for an item will mean the
door is open for longer.
Allow hot food and drinks to cool
down before placing them in the
appliance.
Hot food will cause the refrigerator
unit to run for a long time, as the
appliance will have to work harder
to reduce the temperature.
Store food covered or packaged.
The evaporation or condensation of
liquids will cause a loss of coldness
in the refrigerator.
Place frozen food in the refrigerator
to defrost.
Do not over-fill the appliance to
allow air to circulate.
Defrosting
Defrost the freezer section when a A layer of ice hinders the cold from
layer of ice 0.5 cm thick has built reaching the frozen food, and
up. increases energy consumption.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Before using for the first time
Important. Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellent
protective coating.
Important:
To ensure the correct functioning of
the appliance, let it stand for 1½ to
2 hours after transporting it to its final
location before connecting it to the
mains.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing up liquid, and then
dry with a soft cloth.
Protective foil
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
damage during transportation.
On stainless steel appliances, the outer
surfaces are also covered with
protective foil.
Active charcoal filters
(Active AirClean filters)
^ Place the active charcoal filters
supplied inside the holder, and place
the holder on one of the shelves
inside the refrigerator (see "Active
charcoal filters").
^ Do not remove the foil until the
appliance has been positioned in its
final location.
Cleaning and care
^ Treat the stainless steel trim to the
interior shelves and the door shelves
with the Miele stainless steel
conditioner supplied as soon as you
have removed the foil.
^ On stainless steel appliances also
treat the side panels with the Miele
stainless steel conditioning agent
supplied as soon as you have
removed the protective foil.
The appliance doors have a special
finish which is resistant to soiling. Do
not use Miele stainless steel
conditioner on the appliance door.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Operating the appliance
Settings mode
A light touch of the finger on the
Certain settings on the appliance can
sensors is all that is required to operate only be selected in the settings mode.
this appliance.
How to select the settings mode and
how to change the settings is
Switching on
described in the relevant section of
these instructions.
Overview of functions that can be
selected in the settings mode:
^ Touch the On/Off sensor until the
To enter or leave the settings
temperature display comes on.
c
mode
The appliance will start to cool, and the
To switch the sensor tones
on/off
interior lighting will come on when the
door is opened.
b
(see "Switching on and off")
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
To confirm that the active
charcoal filters have been
changed (see "Active charcoal
filters")
^
u
d
Switching off
To switch the safety lock on/off
(see "Switching on and off")
To change the brightness of
the temperature display
(see "The correct
^ Touch the On/Off sensor until all of
temperature")
the indicators go out.
The interior light will not come on when
you open the door and the cooling
process will be switched off. (If this
does not happen, the safety lock is still
activated).
The door alarm is automatically
disabled when the appliance is in
the settings mode. As soon as the
door is closed, the door alarm is
activated again.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Switching the sensor tones on/off
Activating or de-activating the safety
lock
The sensor tone which sounds each
time a sensor is touched can be
deactivated.
The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
^ Touch and leave your finger on the X
sensor.
^ Touch and leave your finger on the X
sensor.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^ Touch the X sensor repeatedly until b
appears in the display.
^ Touch the X sensor repeatedly until u
appears in the display.
^ Touch the On/Off sensor.
^ By touching the X sensor, you can
now select whether the sensor tones
are switched on or off:
^ Touch the On/Off sensor.
^ By touching the X sensor, you can
now select whether the safety lock is
switched on or off:
b 0: Sensor tones are switched off
b 1: Sensor tones are switched on
b –: Return to menu.
u 0: The safety lock is deactivated
u 1: The safety lock is activated
u –: Return to menu.
The old setting lights up, and your
newly selected setting flashes.
The old setting lights up, and your
newly selected setting flashes.
^ Touch the On/Off sensor to confirm a
new setting.
^ Touch the X sensor repeatedly until c
appears in the display.
^ Touch the On/Off sensor.
You have now left the settings mode.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
^ Touch the On/Off sensor to confirm a Switching off for longer
new setting.
periods of time
^ Touch the X sensor repeatedly until c
appears in the display.
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ Touch the On/Off sensor.
^ switch the appliance off,
You have now left the settings mode.
^ disconnect it from the mains. Switch
The safety lock indicator X will light up
off at the wall and withdraw the plug
in the temperature display when the
from the socket, or disconnect the
safety lock has been activated.
mains fuse.
^ clean the appliance out and
^ leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
Setting the temperature
The temperature inside the appliance
can be selected by touching the arrow
sensors on either side of the
temperature display.
By touching the
The temperature in the appliance will
rise:
X sensor: the temperature will get
– the more often the door is opened
and the longer it is kept open,
colder
Y sensor: the temperature will get
warmer.
– the more food that is stored in it,
The temperature being set will flash in
the display.
– the warmer the food is which is being
put into it,
When touching the sensors, the
following information shows in the
display:
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
– Touching a sensor once: the last
temperature selected flashes.
– Each subsequent touch of a sensor:
adjusts the temperature shown in
1 °C steps.
. . . temperature in the
refrigerator
– Leaving a finger on the sensor:
changes the temperature
continuously.
We recommend a temperature of 4 °C
in the middle of the refrigerator.
When the highest or lowest
temperature in the range is reached,
the X or Y sensor disappears.
Approx. 5 seconds after taking your
finger off the sensor, the average,
current temperature inside the
appliance is automatically shown.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display, as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still
too high or too low, you will need to
adjust it again.
^ Touch and leave your finger on the X
sensor.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
Temperature range
The temperature can be adjusted from
2 °C to 9 °C.
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
^ Touch the X sensor repeatedly until d
appears in the display.
^ Touch the On/Off sensor again.
^ The temperature display brightness
can now be changed by touching the
X sensor:
Temperature display
d 0: Maximum brightness
d 1: Reduced brightness
d –: Return to menu.
During normal operation, the
temperature display on the control
panel shows the average temperature
in the refrigerator.
The old setting lights up, and your
newly selected setting flashes.
The temperature display will flash if
The old setting lights up, and your
newly selected setting flashes.
– the temperature is not within the
possible temperature range (0 °C to
19 °C),
^ Touch the On/Off sensor to confirm a
new setting.
– a different temperature is being set.
^ Touch the X sensor repeatedly until c
appears in the display.
Changing the temperature display
brightness
^ Touch the On/Off sensor.
The temperature display brightness can
be adjusted to suit the lighting
conditions of the room.
You have now left the settings mode.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm
Your appliance has been fitted with an
alarm to avoid energy being wasted if
the door is left open and to prevent
stored food becoming too warm.
To switch off the door alarm
whilst the door is still open
If you want to keep the door open
intentionally for more than approx.
2 minutes, you can switch the alarm off.
The alarm will sound if the door is left
open for more than approx. 2 minutes.
The Alarm off sensor will light up red
and the "Cooling" symbol will flash.
The alarm will stop and the indicators
will go out as soon as the door is
closed.
^ Touch the Alarm off sensor.
The alarm will stop.
The Alarm off sensor will light up
constantly and the "Cooling" symbol
will continue to flash until the door
has been closed.
To switch on the door alarm
The alarm system switches back on
automatically as soon as the door is
closed. It does not have to be switched
on manually.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Super cool and Dynamic cooling
Super cool
Dynamic cooling m
The Super cool function can be used to When the Dynamic cooling function is
rapidly reduce the temperature in the
refrigerator to its lowest setting
not switched on, the natural circulation
of air in the appliance will cause
different temperature zones in the
refrigerator as the cold, heavy air will
sink to the lowest section of the
(depending on the room temperature).
Switching on Super cool
appliance. You should bear this in mind
when placing food in the appliance
(see "Using the refrigerator efficiently").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
Dynamic cooling. This way you can
distribute the temperature inside the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
Super cool is particularly
recommended for the faster chilling of
large amounts of fresh food or drink.
^ Touch the Super cool sensor. It will
light up yellow.
The temperature is set as normal with
the temperature control.
The appliance will then work at full
power to lower the temperature.
Dynamic cooling should also be
selected when:
Switching off Super cool
The Super cool function will switch itself
off automatically after approx. 6 hours.
The appliance will then continue to
work at normal power.
– the ambient temperature in the room
is high (above approx. 30 °C), and
– the room humidity level is high.
To save energy, the Super cool function
can be switched off once food and
drinks are sufficiently chilled.
Switching on Dynamic cooling
^ Touch the Super cool sensor so that
the yellow indicator is dimmed.
^ Touch the Dynamic cooling sensor. It
The appliance will continue running at
normal power.
will light up yellow.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Super cool and Dynamic cooling
Switching off Dynamic cooling
^ Touch the Dynamic cooling sensor so
that the yellow indicator is dimmed
The fan automatically switches off
when the door is open.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the refrigerator efficiently
Different storage zones
– pre-packed vegetables and other
fresh food with a label stating it
should be kept at a temperature of
approx. 4 °C.
Due to the natural circulation of the air
in the appliance, there are different
temperature zones in the refrigerator.
Cold, heavy air sinks to the lowest
section of the appliance. Make use of
the different zones when placing food
in the appliance.
Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Danger of explosion.
This appliance has Dynamic
cooling, which helps to keep an
even temperature when the fan is
running. When Dynamic cooling is
switched on, the difference between
the various zones is less
If storing alcohol with a high
percentage proof, make sure it is
tightly closed, and store upright.
pronounced.
Do not store cooking oil in the
refrigerator door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
Warmest area
The warmest area is in the top section
of the door. Use this for storing butter
and cheese.
Food must not touch the back wall of
the refrigerator, as it may freeze to
the back wall.
Coldest area
The coldest area in a refrigerator is
directly above the vegetable
containers.
To allow air to circulate efficiently,
do not pack food too closely
together in the refrigerator. Do not
cover the fan in the rear wall of the
refrigerator, as this is essential for
keeping the appliance cool.
Use this for all delicate and highly
perishable food, e.g.
– fish, meat, poultry,
– sausage products, ready meals,
– dishes or baked goods containing
eggs or cream,
– fresh dough, cake mixtures, pizza or
quiche dough,
– soft cheese and other dairy
products,
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the refrigerator efficiently
Food which should not be
stored in a refrigerator
Storing food correctly
Food should generally be stored
covered or packaged. This will prevent
Not all food is suitable for refrigeration,
as some food is sensitive to cold.
Cucumbers, for example, become
glassy, aubergines bitter and potatoes
sweet. Tomatoes and oranges lose their
aroma, and the peel on citrus fruit
hardens.
food smells from affecting other foods,
food from drying out, and also any
cross-contamination of bacteria. The
growth of bacteria, such as salmonella,
can be avoided by setting the correct
temperature and maintaining good
standards of hygiene.
Food which should not be stored in a
refrigerator includes:
Fruit and vegetables
– pineapple, pomegranate, bananas,
avocado, mangos, papaya, passion
fruit, citrus fruit
Fruit and vegetables may be stored
loose in the vegetable containers.
Please be aware that not all types of
fruit and vegetables are suitable for
storing in the same container. Aromas
and flavours can transfer from one type
of food to another (e.g. carrots absorb
the smell and flavour of onions very
easily). Some food also gives off a
natural gas (ethylene) which speeds up
the rate at which other food perishes.
– fruit which is not yet ripe
– aubergines/egg plant, cucumbers,
potatoes, peppers/capsicum,
tomatoes, courgettes,
– some hard cheeses, e.g. Parmesan
When shopping for food
– Examples of fruit and vegetables
which produce a large amount of
this natural gas are:
The freshness of food when first placed
in the appliance is an important factor
in determining how long it stays fresh,
and how long it can be kept in the
refrigerator. Time out of the refrigerator,
e.g. during transportation, should be
kept to a minimum. For example, do not
allow food to stay in a hot car for too
long. Once food has started to
Apples, apricots, pears, nectarines,
peaches, plums, avocado, figs,
blueberries, melons and beans.
deteriorate, this process cannot be
reversed. As little as two hours outside
the refrigerator can cause food to start
deteriorating.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the refrigerator efficiently
– Examples of fruit and vegetables
which react strongly to the natural
gases given off by other types of
fruit and vegetables are:
Meat
Meat should be stored unwrapped.
(Undo wrappings slightly to leave meat
loosely covered, and leave containers
open). This permits air to circulate
Kiwis, broccoli, cauliflower, brussels
sprouts, mangos, honeydew melons, around the meat, allowing the surface
apples, apricots, cucumbers,
tomatoes, pears, nectarines and
peaches.
to dry slightly, which helps prevent the
growth of bacteria. To prevent the risk
of bacterial cross-contamination and
meat deteriorating, do not let one type
of meat come into direct contact with
another type.
Example: Broccoli should not be
stored with apples, as apples
produce a large amount of natural
gas to which broccoli is very
sensitive. The result is a shorter than
expected storage time for the
broccoli.
Unpacked meat and vegetables
Unpackaged meat and vegetables
should be stored separately. To avoid
any microbiological cross-
contamination, these foods may only be
stored together if they are wrapped.
Protein rich foods
Please note that foods rich in protein
deteriorate faster than others.
Shellfish, for example, deteriorates
faster than fish, and fish deteriorates
faster than meat.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Moving the shelves
To move the split shelf:
The shelves can be adjusted according ^ Take both halves of the split glass
to the height of the food.
shelf out,
^ Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
^ fit the two brackets onto the supports
Stoppers prevent the shelves from
being dislodged by mistake.
on either side at the required height,
^ and push the glass shelves in one
after the other.
Split shelf
The shelf with the raised edge must
be at the back.
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
^ Push the rear half of the glass shelf
up slightly from below.
^ At the same time, pull the front half of
the glass shelf forwards slightly and
then push it carefully under the rear
half.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Fruit and vegetable containers Adjusting the condiment
on telescopic runners
tray/bottle shelf
The fruit and vegetable containers are
pushed in and out on telescopic
runners, and can be completely
removed if necessary.
^ Lift the tray/shelf up and out of the
stainless steel frame to remove.
^ Push up the stainless steel frame,
and remove.
^ Pull the container right out and then
^ Replace the frame at the required
height. Ensure that it is securely
pushed back into position.
lift it up and off.
Push the runners back in again to
avoid injury or damage.
^ Replace the tray/shelf in the frame.
The tray/shelf can be removed
completely and used as a serving tray
at the table.
To replace a container,
^ place it back on the fully extended
runners a. The front of the runners
must be right up against the front of
the container b.
^ Then push the container back in c.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Universal container
Moving the bottle divider
The universal container can be used
both to store and serve food.
The bottle divider can be moved to the
left or right to ensure that bottles are
held securely in position when the door
is opened and shut.
The bottle divider can be removed
completely (e.g. for cleaning).
^ To do this, push up the front edge of
the bottle divider, and disengage it.
It consists of a deep tray a and a
shallow tray b. Both trays fit the
stainless steel frame.
If you wish to use the universal
container to serve food,
^ place the shallow tray b in the
stainless steel frame, and use the
deep tray as a lid a.
You can lift the universal container,
including contents, out of the frame and
take it to the table.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic defrost
The refrigerator defrosts automatically.
Condensate and frost can build up on
the back wall of the refrigerator whilst it
is in use. You do not need to remove
this, as it will defrost and evaporate
automatically with the warmth
generated by the appliance.
The condensate is drained away via a
channel and drain hole into an
evaporation system at the back of the
appliance.
Ensure that the condensate channel
and drain hole are kept clean and
are never blocked so that
condensate can flow away without
hindrance.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
A range of Miele branded cleaning
and conditioning products is
available to order from Miele or
Unlike stainless steel cleaning
agents, the conditioning agent does
not contain any abrasive substances
and will gently remove soiling. Each
time it is used, it forms a water and
dirt repellent protective coating.
Make sure that no water can
penetrate into the electronic unit or
into the light.
To avoid damaging the surface of
your appliance, do not use:
Do not let water get into the
drainage channel and drain hole
when cleaning.
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents,
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
The data plate located inside the
appliance must not be removed. It
contains information which is required
in the event of a service call.
– oven sprays,
– glass cleaning agents,
The stainless steel door has a
special finish which is resistant to
soiling.
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– melamine eraser blocks,
– sharp metal scrapers.
Do not treat the door with stainless
steel conditioning agent as this will
cause noticeable smearing.
Before cleaning
However, do use Miele stainless
steel conditioning agent to treat the
other stainless steel surfaces of the
appliance (available from Miele or
www.miele-shop.com).
^ Switch the appliance off.
^ Disconnect it from the mains.
^ Take any food out of the appliance
and store it in a cool place.
^ Take out any removable parts, e.g.
shelves, for cleaning.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ The bottle shelf and condiment tray in Cleaning the interior and
the door can be removed from their
accessories
stainless steel frames for cleaning.
^ Clean the appliance at least once a
To remove the stainless steel trim from
month using lukewarm water and a
the lid of the butter and cheese
little washing-up liquid.
compartment (in the top of the door),
The following are dishwasher safe:
proceed as follows:
– the butter dish, egg trays
^ Take the butter and cheese
(supplied as standard, depending on
compartment out of the refrigerator
model)
section.
– the bottle and condiment shelves in
^ Open the lid of the compartment.
the door (removed from their stainless
steel frames)
The stainless steel trim is a tight fit
across the plastic lid and will require
– the butter and cheese compartment
sufficient force to detach it.
(with the stainless steel trim removed)
The stainless steel frames and the
stainless steel trim on the butter and
cheese compartment in the door are
not suitable for cleaning in a
dishwasher.
The temperature of the dishwasher
^ Detach the stainless steel trim from
programme must not exceed 55 °C.
the edge of the lid (1.) at one side
Contact with some foodstuffs, such
and remove.
as carrots, tomatoes or ketchup can
cause plastic items to discolour.
^ Press the white plastic stoppers out
However, this discolouration will not
of notches (2.).
affect the stability of plastic items.
^ After cleaning, refit the stainless steel
trim onto the lid in the reverse order.
^ Clean the interior shelves and
drawers by hand. These are not
suitable for cleaning in a dishwasher.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth.
^ The surfaces should be cleaned
using a solution of hot water and a
little washing-up liquid applied with a
soft sponge. They can also be
Leave the door open to air the
appliance for a short while.
cleaned with a damp microfibre cloth
(without using any cleaning agent).
^ Miele stainless steel conditioning
agent can be used to remove any
soiling. The conditioning agent will
also form a protective coating on the
surface.
^ After cleaning, wipe with a damp
cloth and dry with a soft cloth.
Stainless steel appliances
– Appliance door
^ It is important to treat the stainless
steel frames and trim with Miele
stainless steel conditioning agent
each time they are cleaned. This will
protect the surface and help prevent
resoiling.
The appliance door has a high quality,
special finish which is resistant to
soiling and is very easy to clean.
Do not use the following to
clean/condition the door
– stainless steel cleaning agent:
this will damage the surface.
– Miele stainless steel conditioning
agent:
Appliance door, side panels
Remove any soiling from the
appliance door and side panels im-
mediately.
this will cause noticeable smearing.
If this is not done, it might become
impossible to remove and could
cause the surface to alter or
discolour.
– Side panels
^ Use Miele stainless steel conditioning
agent to remove any soiling.
^ Make sure you treat the side panels
with Miele stainless steel conditioning
agent each time you clean them.
This will give them a water and dirt
repellent protective coating and help
prevent re-soiling.
All surfaces are susceptible to
scratching.
Contact with unsuitable cleaning
agents can alter or discolour the
surfaces.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Ventilation gaps
After cleaning
^ The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
^ Replace all shelves and accessories
in the appliance.
^ Insert the plug in the socket and
switch on at the mains. Then switch
the appliance back on.
^ Switch on the Super cool function for
a while so that the appliance can
cool down quickly.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
^ Place food back in the appliance and
close the door.
^ The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
Metal grille at the back of the
appliance
The metal grille at the back of the
appliance (heat exchanger) should be
dusted at least once a year. A build-up
of dust will increase the energy
consumption of the appliance.
When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Active charcoal filters
The active charcoal filters should be
changed approx. every 6 months.
To confirm the filters have been
changed
^ Touch the Change active charcoal
When the Change active charcoal filter
indicator lights up red, the active
charcoal filters need to be changed.
filter indicator for approx. 2 seconds.
The indicator light will go out, and the
counter will be reset.
To change the active charcoal
filters
To delay changing the active
charcoal filters
If you do not have new active charcoal
filters, you can order them from your
Miele dealer or from the Miele Spare
Parts Department.
You can switch off the Change active
charcoal filter indicator early, if you
would prefer not to have the red
indicator showing.
^ Pull the active charcoal filter holder
upwards to remove it from the shelf.
^ Touch the Change active charcoal
filter indicator for approx. 2 seconds.
The Change active charcoal filter
indicator will go out.
^ Take out the two filters and fit the new
filters into the holder with the
protruding cloth edge facing
downwards.
^ Place the holder in the middle of the
raised edge at the back of the shelf,
so that it clicks into position.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Active charcoal filters
If you have delayed changing the
active charcoal filters and the indicator
is not lit up, you will need to reset the
counter when you replace the active
charcoal filters via the settings mode.
Useful tip:
When you are storing foods with a
strong smell (such as ripe cheeses),
– place the holder containing the
active charcoal filters on the shelf
where the food is going to be stored,
– change the active charcoal filters
early if required (remembering to
reset the counter),
^ Touch and leave your finger on the X
sensor.
– and place more active charcoal
filters (in holders) in the appliance.
Active charcoal filters and holders
can be obtained from your Miele
dealer or from the Miele Spare Parts
Department.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^ Touch the X sensor repeatedly until
^ appears in the display.
^ Touch the On/Off sensor.
^ Touch the X sensor repeatedly until
^ 2 appears in the display.
^ Touch the On/Off sensor for approx.
2 seconds to confirm.
The counter is now reset.
^ Touch the X sensor repeatedly until
c appears in the display.
^ Touch the On/Off sensor.
You have now left the settings mode.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the compressor is switching in
too frequently and for too long.
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in strict accordance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer cannot
be held liable for unauthorised work.
^ Check whether the ventilation gaps
have been covered over or become
dusty.
^ Check whether the metal grille (heat
exchanger) at the back of the
appliance has become too dusty.
^ The door has been opened too
frequently, or a large amount of food
has been put in at once.
What to do if . . .
^ Check that the door has been closed
. . . the appliance does not get cool.
properly.
^ Check whether the appliance has
been switched on. The temperature
display must be lit up.
. . . the compressor runs
continuously.
^ Check that the plug is correctly
inserted into the socket and switched
on.
To save energy, the compressor runs at
a lower speed, but for longer, when
less cooling is required.
^ Check that the fuse is not defective
and that the mains fuse has not
tripped. If it has, contact the Miele
Service Department.
. . . the interior lighting is not
working.
^ Was the door left open for too long?
The lighting switches itself off
automatically after approx.
15 minutes.
. . . the temperature in the refrigerator
is too low.
^ Select a warmer temperature.
If this is not the case, then the LED
lighting is defective.
^ The Super cool function is still
switched on. Super cool only
switches itself off after 6 hours.
^ Call the Service Department.
The LED lighting may only be repaired
or replaced by a service technician.
There are live electrical components
under the cover. Danger of injury and
damage.
. . the alarm sounds.
Has the appliance door been open for
longer than 2 minutes?
^ Close the door.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Do not remove the cover. Should the
cover be damaged or need to be
removed due to damage, exercise
caution. There are lasers in the
lighting (laser beam class 1M) which
you should avoid looking at directly.
Do not use optical instruments
(magnifying glass or similar) to look
at the lighting either.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unnecessary loss of
temperature it is advisable not to
open the door while waiting for the
appliance to be serviced.
. . . the change the active charcoal
filter indicator is red.
^ Replace the active charcoal filters.
You can order replacement filters via
your Miele dealer or the Miele Spare
Parts Department.
. . . "_F" shows in the temperature
display.
There is a fault. Call the Service
Department.
. . . "dn" appears in the temperature
display.
The demonstration function is activated.
^ Call the Service Department.
. . . you cannot switch the appliance
off.
The safety lock has been activated.
. . . the floor of the refrigerator is wet.
The drain hole is blocked.
^ Clean the condensate channel and
drain hole.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Noises
Normal noises
What causes them
Brrrrr...
Humming noise made by the motor (compressor). This noise can
get louder for brief periods when the motor is switching on.
Blubb, blubb....
Click....
A gurgling noise can be heard when coolant is circulating
through the pipes.
Clicking sounds are made when the thermostat switches the
motor on and off.
Sssrrrrr....
Creak ...
On multi-zone and frost-free appliances you can sometimes just
hear the movement of air circulating inside the appliance.
Creaking sounds can be heard when material inside the
appliance expands.
Remember that the noise of the compressor and the coolant circulating in the
system is unavoidable.
Noises that you can
easily rectify
What causes them, and what can you do about
them
Rattling, vibrating
The appliance is uneven: Realign the appliance using a spirit
level, by raising or lowering the screw feet underneath the
appliance.
The appliance is touching another appliance or piece of
furniture: Move it away.
Drawers, baskets or shelves are unstable or sticking: Check
all removable items and refit them correctly.
Are any bottles or containers unstable or knocking against
each other? Separate them.
The transport cable clips are hanging loose at the back of
the appliance: Remove the clips.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales / Guarantee
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee, please contact:
– your Miele Dealer
or
– Miele
(see back cover for contact details).
When contacting your Dealer or Miele,
please quote the model and serial
number of your appliance. This
information is given on the data plate
inside your appliance.
Please note that telephone calls may
be monitored and recorded for
training purposes.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as described
in these instructions.
Guarantee
For information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for contact details.
In the U.K. your appliance is
guaranteed for 2 years from the date of
delivery. However, you must activate
your cover by calling 0845 365 6640 or
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Electrical connection U.K.
Non-rewireable plugs (BS 1363)
All electrical work should be carried out The fuse cover must be re-fitted when
by a suitably qualified and competent changing the fuse, and if the fuse cover
person in strict accordance with current is lost, the plug must not be used until a
local and national safety regulations
(BS 7671 in the UK).
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words in the base of the
plug (as applicable to the design of the
plug fitted).
The appliance is supplied with a mains
cable and moulded plug ready for
connection to an a.c. single phase
220-240 V 50 Hz supply.
Please ensure that the connection data
quoted on the data plate match the
household mains supply.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
Connection should be made via a
suitable switched socket which is easily your local electrical supplier.
accessible. For extra safety it is
advisable to protect the appliance with
a suitable residual current device
WARNING
(RCD).
THIS APPLIANCE MUST BE
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
EARTHED
This appliance must not be connected
to the inverter of an autonomous power
supply, e.g. a solar power system.
When switching the appliance on, a
surge in power could trigger the safety
cut-out mechanism. This could damage
the electronic unit.
The appliance must not be used with
so-called energy saving devices. These
reduce the energy supply to the
appliance which could then become
too warm. Using such devices could
alter the specification of the product.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Do not place any appliance which
gives off heat, such as a toaster or
microwave oven, on top of this
appliance, as this would increase
the appliance's energy
Important: tropical / humid
environments
During periods of high humidity,
some condensation may appear on
outside surfaces of cooling
consumption.
appliances. This condensation will
disappear when humidity levels
drop. For prevention, it is advisable
to install the appliance with sufficient
ventilation in a dry and/or an
Side-by-side installation
To avoid a build-up of condensation
and resultant damage, refrigerators and
freezers should not generally be
installed side by side next to other such
appliances.
air-conditioned room. Please ensure
that doors are closing and sealing
properly. Please ensure that the
appliance is installed in accordance
with these installation instructions
and that the handle is fitted
However, some appliances have
side-wall heating making them suitable
for side-by-side installation with this
refrigerator.
correctly. Should you require further
assistance please contact your
Miele customer service centre.
Your dealer will be able to advise
you on which models are suitable.
Climate range
The appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.
^ Follow the instructions for the other
appliance on how to install the two
appliances side by side.
Location
This appliance should be installed in a
dry, well-ventilated room. It should not
be installed where it is exposed to
direct sunlight or directly adjacent to a
heat-producing appliance such as an
oven or a radiator. The room
Climate range
Ambient room
temperature
SN
N
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
+10°C to +38°C
+10°C to +43°C
ST
T
SN-ST
SN-T
temperature should not go above or
below the climate range for which the
appliance is designed. The higher the
ambient temperature of the room, the
more energy the appliance requires to
operate.
Operating in a room which is too cold
will result in the cooling system
switching off for too long, causing the
internal temperature in the appliance to
rise with the risk of food deteriorating
and going off.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Ventilation
Stainless steel appliances
Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the ventilation gaps must not be
covered over. The air inlet and outlet
must not be covered or blocked in any
way. They should be dusted on a
regular basis.
Installation
^ Remove the cable clip from the back
^ If necessary, also align the two rear
adjusting devices a using socket
wrench b.
of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Turn the adjusting device clockwise
to raise the appliance up at the back.
^ Carefully push the appliance into
position with the back against the
wall.
Levelling the appliance door
Aligning the appliance
^ Ensure that you unscrew adjusting
foot c from the hinge plate until it sits
on the floor. Then unscrew the foot by
a further 90°.
^ To align the appliance, adjust the
front feet using the spanner supplied.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Appliance dimensions
A
B
C
K 14820 SD
K 14820 SD ed/cs
1850 mm
600 mm
630 mm
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
The appliance is supplied right-hand
hinged. If left-hand door hinging is
required, follow the instructions below.
To change the door hinging you will
need the following tools:
– a cross-slotted screwdriver,
– a flat-bladed screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
Two people are needed for
changing the door hinging.
Removing the door handle
^ Pull door handle a towards you. Side
section b slides back.
^ Pull side section b firmly back out of
the guides on the mounting plate.
^ Undo the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
Removing the soft-close door
mechanism
^ Fit restraining clip b (supplied with
the appliance) onto soft-close
mechanism c.
The soft-close door mechanism is at the
bottom of the door.
The restraining clip stops the hinge
from snapping shut. Do not remove the
clip until told to do so.
^ Open the door.
^ Carefully remove cover d from the
side using a flat-bladed screwdriver.
^ With the help of another person, tip
the appliance back slightly.
^ Remove panel a from the soft-close
mechanism by inserting a flat-bladed
screwdriver into the gap from above
and easing it off bit by bit.
Take care not to damage the door
seal.
^ Push hinge pin e up and out from
underneath.
If the door seal is damaged, the
door will not close properly and
cooling will be impaired.
The soft-close mechanism is now no
longer fixed to the appliance.
^ Remove panel a.
^ Slide panel a towards the appliance,
and leave it hanging between the
door and the appliance.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Remove cover b by pulling it
upwards.
Caution. The door is not secure as
soon as the hinge plate is removed.
^ Loosen screws d in upper hinge
plate c and pull it upwards and off.
^ Carefully lift the door off and place it
to one side.
^ Slide soft-close mechanism bracket
f as far as it will go towards the
handle side of the door, and undo
screws g on the soft-close
mechanism.
^ Gently loosen cover e by carefully
inserting a flat-bladed screwdriver
into the gap from below.
^ Remove cover e together with
retaining plate f.
^ Using a flat-bladed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.
^ Then separate retaining plate f from
cover e, by pushing it slightly to the
left and then pulling the cover
forwards and off.
^ Then place it to one side.
^ Rotate retaining plate f by 180°.
Changing over the door
^ Then fit cover e from the front over
retaining plate f, and slide it over to
the right. The writing must be visible.
Make sure the door shelves are
empty!
^ Remove cover g, rotate it by 180°
and fit it to the opposite side.
^ Close the door.
^ Remove cover a by sliding it
forwards from the back and then
lifting it off.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Then fit cover e together with
retaining plate f on the opposite
side.
^ Unscrew part h from hinge plate f,
rotate it by 180° and refit into the hole
on the opposite side of the hinge
plate.
^ Refit cover cap d in the other hole.
^ Remove cover g and fit it into the
holes on the opposite side.
^ Screw hinge plate f into position on
the opposite side using the two outer
long slots only. To make it possible to
align the door later, do not replace
the centre screw at this stage.
^ Important. Screw the adjustable foot
c into hinge pin a as far as it will go.
^ Refit hinge pin a together with disc
b and adjustable foot c. Important.
The notch at the bottom of the hinge
pin should face towards the back.
^ Remove cap h from the bearing
bush in the door and refit on the
opposite side.
^ Place the door onto hinge pin a.
^ Close the door.
^ Pull hinge pin a together with disc b
and adjustable foot c upwards and
off.
^ Remove cover cap d.
^ Undo screws e and take hinge plate
f off.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Slide the soft-close mechanism back
into the door as far as it will go
towards the appliance using a
flat-headed screwdriver.
^ Fit hinge plate c onto the opposite
side and secure it with screws d.
If necessary drill a pilot hole for the
screws.
The screw holes on the left and right
must line up perfectly.
^ Fit covers a and b to their opposite
sides.
^ Align the door with the appliance
housing using the outer long slots in
the lower hinge plate. Then tighten
the screws.
Replacing the soft-close door
mechanism
^ First screw the soft-close mechanism
onto the appliance side, then onto
the handle side c, pushing it firmly
towards the appliance.
^ Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
^ Insert the soft-close mechanism back
into the door, starting at the right
hand side.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
Refitting the handle
Please make sure you follow the
instructions below carefully when
you refit the handle. The door seal
will be damaged if the handle is
fitted incorrectly.
^ Attach panel b to soft-close
mechanism bracket d.
^ Align bracket d to the hinge plate,
and insert pin e from above so that
the right angle fits into the recess.
^ Click cover f back into place.
Make sure that cover f fits properly so
that the door can be closed without
hindrance and the pin is protected.
^ Loosely attach the handle to the
opposite side of the door with the two
front screws b.
^ Remove retaining clip g.
Mounting plate c must be positioned
on the side of the door so that when the
door is closed it is flush with the side of
the appliance.
If this is not the case,
^ tighten both grub screws a with a
suitable allen key until mounting plate
c lines up correctly.
^ Replace panel b onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
^ Then tighten all 4 screws b.
^ Slide the side section of the handle
d into the guides on the mounting
plate until it clicks into place.
^ Close the door.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
It is important to check that the side
section of the handle d does not
come into contact with the door seal
when opening the door, as this
would damage the door seal
permanently.
If, after you have refitted the handle,
you find that the side section does
touch the door seal when the door is
opened:
^ Realign mounting plate c with grub
screws a until the mounting plate
and the side section of the handle d
are at the correct angle and the side
section does not touch the door seal
when the door is opened.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Aligning the appliance door
The appliance door can be aligned to
the housing using the outer long slots in
the lower hinge plate.
In the following illustration the door
is not shown in the closed position to
make it easier to see what you have
to do.
^ Remove centre screw a from the
hinge plate.
^ Slightly loosen both outer screws b.
^ Align the door by sliding the hinge
plate to the left or right.
^ Then tighten screws b again. Screw
a does not need to be used again.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
The air inlet and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
When built into a kitchen run (max.
depth 580 mm) the appliance can be
installed directly next to a kitchen
furniture housing unit. The appliance
door will protrude in front of furniture
fronts at the sides by 34 mm and by
55 mm in the middle of the door. This
enables the doors to be opened and
shut without being obstructed.
When installed next to a wall d a
distance of approx. 55 mm must be
maintained on the hinge side between
the wall d and the appliance b, so
that the doors and the handles have
sufficient space for opening.
aTop box
bAppliance
cHousing unit
dWall
The appliance can be installed in a
kitchen run. To match the height of the
rest of the kitchen, the appliance can
be fitted with a suitable top box a.
A ventilation gap of at least 50 mm
depth must be allowed for behind the
appliance across the entire width of the
top box for air to circulate.
The cross section of the air outlet under
the room ceiling must be at least
300 cm2 to ensure that air can circulate
without hindrance. Otherwise the
appliance has to work harder, resulting
in an increase in electricity
consumption.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 1311
K 14820 SD, K 14820 SD ed/cs
M.-Nr. 09 021 160 / 03
Download from Www.Somanuals.com. All Manuals Search And Download.
|