Operating instructions
Commercial dishwasher
PG 8083 SCVi
en - CA
To avoid the risk of personal injury
or damage to the appliance,
it is essential that you read
the operating and installation instructions
before installation and use.
M.-Nr. 09 501 370
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Bottle holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Cutlery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3D cutlery tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Operating the commercial dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Turning the commercial dishwasher on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Selecting a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Starting the program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Time display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
End of program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Turning the commercial dishwasher off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Unloading the commercial dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Interrupting a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Extra drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
BrilliantLight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the door and the door seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the reflector panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the control panel and front of the commercial dishwasher . . . . . . . . . . 47
Checking the filters in the wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Cleaning the filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Faults in the water intake or water drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
General problems with the commercial dishwasher . . . . . . . . . . . . . . . . . . . . . . . 55
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Cleaning the water inlet screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Program guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Program updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
The Miele waterproof system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Water intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Water drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Opening the "Settings "menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Language ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
AutoOpen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Optimizing Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Refill messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Filter check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
External Dos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Detergent dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Venting the Dos. system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
High temp rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Preselect progr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Showroom program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
To close the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Noise measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
General requirements for measuring noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Installation requirements for measuring noise. . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the manual
Text which is highlighted or emphasized
Warnings
, Warnings marked with a thick framed box and a
warning symbol contain safety information
concerning potential injury and damage.
! Read the warnings carefully and follow the
instructions and directions.
Notes
Notes contain information that is particularly important to
follow and are highlighted in a thick framed box.
Additional information and comments
Additional information and comments are contained in a
simple frame. They are not imperative for the operation of
the commercial dishwasher.
Operating steps
Specially marked instructions indicate the steps for operating
the commercial dishwasher. They explain the procedure step
by step. Operating steps are identified by a black square.
Example:
^ Select the desired setting and press the centre button to
confirm.
Display
The information is displayed in a special character font like
that in the display.
Example:
When the display shows the message O Finished or
AutoOpen ....
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the commercial dishwasher
Overview
aUpper spray arm (not visible)
bCutlery tray
hData plate
iIn-operation indicator light
jRinse aid reservoir
cUpper basket
dMiddle spray arm
eAir inlet for drying
fLower spray arm
gFilter combination
kDual-compartment detergent
dispenser
lReservoir for regenerating salt
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the commercial dishwasher
Control panel
aDisplay
eProgram selection
b4 ü button, (additional programs)
with indicator light
fX button (Program selector) for
scrolling through the programs
c, button (Delay start)
with indicator light
g- (On/Off) button
with indicator light
dG button + (Extra drying)
with indicator light
hIn-operation indicator light
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Intended use
This commercial dishwasher complies with all current safety
requirements. However, improper use can result in personal injury
and material damage.
To avoid the risk of accidents and damage to the appliance, read
the operating instructions carefully before using the appliance for
the first time. They contain important information on installation,
safety, operation and maintenance.
Keep the instructions in a safe place and pass them along to any
future owner!
Intended use
This commercial dishwasher with its short program running times
~
and powerful cleaning performance is intended for commercial use
in offices, lunch rooms, clubhouses, workshops, active kitchens and
other similar commercial environments.
It can also be used in domestic households and in similar residential
environments and other related establishments.
This commercial dishwasher is not intended for continuous use.
~
This dishwasher is not suitable for processing medical devices
~
and laboratory glassware.
This dishwasher is not suitable for high temperature sanitizing
~
defined by Provincial Food Regulations (Sanitizing Code)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Intended use
Use this commercial dishwasher only for "Dishwashing" as
~
defined in the Operating instructions, i.e. for cleaning dishes and
cutlery. Any other use, conversion or modification is not permissible
and possibly hazardous.
Miele will not be held liable for damage caused by inappropriate use
or improper operation.
This commercial dishwasher is intended for stationary indoor use
~
only.
The special inserts are to be used for their specific purpose only.
~
Individuals who are incapable of using the appliance safely
~
because of limited physical, sensory or mental capabilities or lack of
experience or knowledge must not use this appliance without
supervision or instruction by a responsible person.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions and warnings
Proper installation
Do NOT install the appliance in an area where there is a risk of
~
explosion or freezing.
To ensure the stability of undercounter commercial dishwashers,
~
they must only be installed beneath a continuous countertop that is
bolted to the adjacent cabinetry.
In order to reduce the risk of damage from condensation, the
~
furniture in the area around the appliance should be designed for
professional use.
Technical safety
The appliance should only be put into operation, serviced or
~
repaired by Miele Service. Miele assumes no liability for any hazards
arising from improper installation, maintenance or repairs performed
by unauthorized persons!
Untrained personnel must not be permitted to operate the
~
commercial dishwasher. Operating personnel must receive regular
training.
Before using the appliance, check for visible external damage.
~
Never operate a damaged commercial dishwasher. A damaged
commercial dishwasher can jeopardize your safety!
Immediately shut down a damaged or leaking commercial
~
dishwasher and notify Miele Service.
The appliance should only be repaired by Miele Service.
~
Otherwise the warranty becomes null and void.
Defective components must be replaced with genuine Miele
~
spare parts only. Only these parts are guaranteed by Miele to
comply with safety requirements.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions and warnings
Do not connect the appliance to the electrical power supply until
~
all the installation work has been completed, including adjustment of
the door spring.
The electrical safety of this appliance is only ensured if it is
~
properly grounded in compliance with applicable safety regulations.
If in doubt, have the on-site wiring checked by a qualified
electrician.
Miele will not be held liable for damage or injury (such as electric
shock) caused by a missing or broken ground wire.
Be sure to follow the installation instructions in this manual and in
~
the installation diagram.
Before connecting the appliance, ensure that the connection data
~
on the data plate (voltage, frequency and fuse rating) match the
building's electrical supply.
There must be no electrical outlet behind the commercial
~
dishwasher. Risk of overheating if the commercial dishwasher were
to be pushed up against a plug (see Electrical connection).
Do not connect the appliance to the power supply with a power
~
bar or unsuitable extension cord as they do not ensure the required
safety of the commercial dishwasher (and could cause overheating,
for example).
The appliance must not be installed underneath a cooktop. The
~
high radiant temperatures could damage the commercial
dishwasher. For the same reason, the commercial dishwasher must
not be installed directly next to "non-kitchen" radiant appliances (e.g.
open flame devices for heating purposes, etc.).
NEVER open the appliance housing. Any interference with
~
connections carrying voltage or changes in the electrical or
mechanical set up, will endanger you and may impair the
functioning of the appliance.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions and warnings
Do NOT use the appliance if the power cord is damaged. A
~
damaged power cord must be replaced with a special cord. For
safety reasons, the cord must be installed by Miele Service.
Before servicing the appliance, disconnect it from the power
~
supply.
The plastic housing of the water connection contains an electrical
~
valve. Do not immerse the housing in liquids.
The intake hose contains electrical wires. Therefore, do not
~
shorten the hose.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions and warnings
Proper use
This commercial dishwasher is designed only for operation with
~
water and detergents designed for dishwashers or professional
dishwashers. Organic solvents or flammable liquids must NOT be
used in the appliance.
There is a risk of explosion and/or damage through the destruction
of rubber or plastic components resulting in leaks.
Only use detergents suitable for dishwashers or commercial
~
dishwashers. Using other detergents may damage the dishware
and/or the commercial dishwasher.
For applications where sanitizing is required use "SaniWash
~
Program" with sanitizing at 70 °C or optional 75°C.
Do not stand or sit on the open door. This could damage the
~
appliance.
The supply line to the commercial dishwasher must be bled after
~
work has been performed on the water supply network.
Failure to do so can result in damage to components.
Do not leave the commercial dishwasher door open when the
~
machine is not in use. You could hurt yourself on the open door.
Beware of the high temperatures when operating this appliance.
~
Be aware of the risk of scalding or burning when opening the door!
Dishes, cutlery, baskets and inserts must first cool off. Empty any
hot water remaining in hollow items into the wash cabinet.
The water in the wash cabinet is NOT safe to drink!
~
Certain pre-treatments (for example with dishwashing liquid or
~
other detergents) as well as certain contaminants and some
cleaning agents can generate foam. Foam can adversely affect the
cleaning performance.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions and warnings
Foam escaping from the wash cabinet can damage the
~
appliance. If any foam is escaping, cancel the program immediate-
ly!
When using detergents and special products, always follow the
~
manufacturer's instructions. In order to avoid material damage or
potential chemical reactions (such as explosive hydrogen gas
reactions), use detergents only for the applications specified by the
manufacturer.
Avoid inhaling powder detergents! Do NOT swallow detergents!
~
Detergents can cause chemical burns to nose, mouth and throat.
Seek medical help immediately if you have inhaled or swallowed any
detergent. Observe the detergent manufacturer's safety instructions.
Miele does not accept any liability for the effect of chemical
~
cleaning agents on the dishware. Observe the detergent
manufacturer's directions for storage, use and dosage.
To prevent corrosion and damage to materials, ensure that no
~
acids, chloride solutions or corrosive iron materials are introduced
into the wash cabinet.
Do NOT hose down the appliance or its immediate vicinity, e.g.
~
with a water hose or pressure washer.
Be aware of the potential for injury when utensils with sharp,
~
pointed ends are placed upright. Position them so they cannot
cause injury.
Remove all large food and liquid residues from the tableware
~
before loading.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions and warnings
Children in the vicinity
Always supervise any children in the vicinity of the appliance.
~
Never allow children to play with the appliance. Among other
hazards, children run the risk of locking themselves in the
commercial dishwasher!
Do not allow children to operate the commercial dishwasher.
~
Keep detergents away from children! If detergents are ingested,
~
they can cause chemical burns in the mouth and throat, or even
suffocation. Therefore, keep children away from the commercial
dishwasher when open. There may still be detergent residues in the
appliance.
Seek medical help immediately if a child has ingested any
detergent.
Accessories
Accessories may only be attached or installed if they have been
~
expressly approved by Miele for this appliance. Adding or installing
other parts will void any warranty and/or product liability claims.
The manufacturer will not be held liable for damage caused by
failure to comply with the safety instructions and warnings.
SAVE THESE INSTRUCTIONS
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packaging
Disposing of your old
appliance
The packaging protects the commercial
dishwasher from damage during
shipping. They have been selected for
environmental friendliness and can be
recycled.
Old electric and electronic equipment
still contains useful materials that can
be recovered. However, it may also
contain harmful substances that were
necessary for their function and safe
use. Improperly disposing of these
items in your household waste can be
harmful to your health and the
The packaging comprises the following
materials:
Exterior packaging:
environment. This is why it is important
NEVER to dispose of your old
– Corrugated cardboard made of up to
100% recycled material,
or: polyethylene (PE) stretch wrap
film
appliance in your regular household
waste.
– Polypropylene (PP) tightening straps
Interior packaging:
– Expanding polystyrene (EPS) without
chlorine or fluorine
– Floor, lid frame and support strips
made of untreated natural wood
harvested from forest stewardship
forests
Instead, use your local community
waste collection and recycling centre
for electric and electronic appliances.
– Polyethylene (PE) protective film
If the appliance is being stored prior to
disposal, please make sure it is
child-proof.
Returning the packaging to the
materials cycle saves raw materials and
reduces waste. Your local community
waste collection / recycling centre will
tell you where the nearest return depot
is located.
All the plastics in the appliance are
marked with standard international
symbols. This allows the separation of
different plastic waste materials for
recycling.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
^ When using powder or liquid
detergent, you can reduce the
amount by 1/3 of the normal dosage if
the baskets are only half full.
This commercial dishwasher is a water
and energy saving appliance.
For best results follow these tips:
^ You may connect the commercial
dishwasher to a hot water line. This is
particularly suitable with
energy-saving water heating sources
such as solar energy systems.
If the hot water system is electrically
heated and if loads comprise
primarily glassware we recommend
connecting the appliance to the cold
water line.
^ Make full use of the baskets' capacity
without overloading. This ensures the
most economical washing.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
^ Use the Normal program for energy
saving dishwashing.
From the aspect of combined energy
and water consumption, this program
is the most efficient for washing
normally soiled dishes.
^ Observe the detergent
manufacturer's recommendations for
detergent dosage.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
Closing the door
^ Push the baskets in.
^ Push the door until it clicks shut.
,Keep your fingers off the door
frame. You may crush your fingers.
At the end of programs with a drying
cycle (see "Program guide") the door
will automatically open a little in order to
improve the drying.
You can cancel this function (see
"Settings menu - AutoOpen").
^ Pull the handle.
If the door is opened during operation
the commercial dishwasher will
automatically stop running.
,Do not block the area in which
the door opens.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Display functions
General
Settings menu
The following functions can be selected The Settings menu allows you to set the
or set with the display:
commercial dishwasher to suit your
special requirements.
– the wash program
– the Delay start time
– the settings
You can open the Settings menu by
pressing a specific button combination.
For further information see Settings
menu.
The following appears in the display
while a program is running:
The normal functions of the buttons
next to the display are not active with
the Settings menu, allowing you to
select and confirm menu items using
these buttons.
– the present program step
– the estimated remaining runtime
– any faults or other messages
In order to save energy, the
The left and right arrows in the display
indicate that additional selections are
available. You can choose these
selections with the left or right button
below the display.
dishwasher will switch to
Standby-mode within a few minutes if
no program is running and no button
is pressed. After several more
minutes it switches off completely
(see Operating the commercial
dishwasher - Standby).
Use the centre button below the display
to confirm messages or settings and to
switch to the next menu or submenu.
To turn the commercial dishwasher
back on, press the - button.
The currently selected setting is
marked with a check (.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Basic settings
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
^ Press the - button to turn the
commercial dishwasher on.
If the commercial dishwasher is being
turned on for the first time, the welcome
screen will appear.
Please note your water hardness below:
gr/gal
Language
The display automatically switches to
the language setting.
The water hardness factory setting is
programmed at 15 gr/gal (270 ppm
CaCO3).
For details about the display, see
chapter Display.
^ Select the hardness of your water
supply and confirm with the centre
button.
^ Select the desired language and
confirm with the centre button.
See "Settings menu - Water
The selected language is marked with a
hardness" for more information.
(.
If the display now shows ( Add rinse
aid and F Add salt, press any button to
confirm. The display changes to the
main menu.
Water hardness
The display changes to the water
hardness setting.
These basic settings are saved after
the first full program cycle is
completed.
– The commercial dishwasher must be
correctly programmed to match the
hardness of your water.
The Welcome screen is no longer
displayed after the first full program
cycle is completed.
– Your local waterworks will be able to
advise you of the water hardness in
your area.
– Where the water hardness fluctuates
(e.g. 17 - 25 gr/gal), always use the
higher value (in this example
25 gr/gal).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Before using the commercial
dishwasher for the first time
you will need:
If the hardness of your water is
always below 4 gr/gal (= 70 ppm
CaCO3), you do not need any salt.
However, you must still program
your dishwater for your water
hardness.
– approx. 1 kg reactivation salt,
– approx. 110 ml rinse aid,
– for detergent see "Operating the
commercial dishwasher". For
available process chemicals from
Miele contact Miele Professional.
,Do not fill the salt reservoir with
dishwashing detergent (even liquid
detergent). Dishwashing detergent
will damage the water softener.
Every commercial dishwasher is
tested before leaving the factory.
There may be residual water in the
machine from this testing. This is not
an indication that it has been
previously used.
,Use only special, coarse-grained
reactivation salt. Other types of salt
may contain insoluble components
which can damage the water
softener.
Filling the salt reservoir
To achieve good cleaning results, the
commercial dishwasher needs soft
water (water that is low in minerals).
Hard water results in white deposits on
dishware and in the dishwasher.
Therefore, tap water with a hardness of
4 gr/gal (70 ppm CaCO3) or more must
be softened. This takes place
automatically in the integrated water
softener. The water softener requires
reactivation salt. The water softener is
suitable for a water hardness of up to
36 gr/gal (650 ppm CaCO3).
See "Settings menu - Water hardness"
for setting the water softener.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
^ Only open the door half way when
adding salt to avoid spilling it.
Do not fill water into the salt
reservoir!
^ Press the button on the top of the salt
reservoir in the direction of the arrow.
The cover will pop open.
^ Only add just enough salt to fill the
reservoir. Depending on the type of
salt, the reservoir will hold up to
approx. 1 kg.
Never fill with more than 1 kg of salt.
Displaced water may run out as the
reservoir is being filled.
^ Clean any excess salt from the filling
area and close the cover of the
reservoir.
^ Immediately run the "Pre-wash"
program without a load in order to
remove any traces of brine from the
cabinet.
^ Open the funnel.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Refill salt indicator
^ Refill the salt reservoir as soon as the
F Add salt message is displayed (if
it appears during a program, wait
until the end of the program).
^ Press the centre button to confirm.
The Refill salt indicator goes out.
If a sufficiently high concentration of
salt has not yet formed, Refill salt may
continue to be displayed after adding
the salt.
In this case, confirm again with the
centre button.
The Refill salt message is turned off if
you have programmed the commercial
dishwasher to a water hardness below
4 gr/gal (= 70 ppm CaCO3).
,Immediately after each refill run
the Pre-wash or Short program
without a load in order to remove
any traces of brine from the cabinet.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Adding rinse aid
Rinse aid helps to prevent spotting on
dishes and glassware and speeds up
the drying process.
The rinse aid is filled into the reservoir
and the set amount will be
automatically dispensed. For available
process chemicals from Miele contact
Miele Professional.
,Use rinse aid only. Never fill the
rinse aid reservoir with regular
dishwashing detergent or cleaning
agent. This will damage the rinse aid
reservoir.
^ Press the button on top of the rinse
aid reservoir in the direction of the
arrow. The cover will pop open.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid indicator
When the ( Add rinse aid message
appears, the reservoir only contains
enough rinse aid for 2 - 3 wash
programs.
^ Add rinse aid soon.
^ Press the centre button to confirm.
The "Refill rinse aid" message goes out.
^ Pour rinse aid into the reservoir until it
is visible in the opening.
The rinse aid reservoir holds
approximately 110 ml.
^ Close the cover until you hear it click
shut, otherwise water might enter the
reservoir during the wash program.
^ Wipe up any spilled rinse aid to
prevent over-foaming during the next
wash program.
You can adjust the rinse aid dosage
to optimize the results (see "Settings
menu - Rinse aid").
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Tips:
– Concave items such as mugs or
bowls should be placed at an angle
so that the water can run off.
Remove coarse food residues from the
dishware.
– Ensure that the spray arms are not
blocked by items that are too tall or
that hang through the baskets.
Check clearance by manually
rotating the spray arms.
There is no need to rinse items under
running water!
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the commercial dishwasher.
These materials damage the
commercial dishwasher.
– Place very small items such as lids in
the cutlery tray or basket (depending
on the model) so they do not fall to
the bottom of the wash cabinet.
All items can be placed anywhere in
the baskets. However, note the
following:
Some foods, e.g. carrots, tomatoes
and ketchup, may contain natural
dyes. Plastic items may discolour
permanently if they come in contact
with food dyes. This discolouration
does not affect the stability of the
plastic items.
– Do not place dishes or cutlery inside
other pieces. They will cover each
other.
– Load dishes so that water can reach
all the surfaces. This ensures that the
items will be properly cleaned!
– Make sure that all items are securely
positioned.
– Hollow items such as cups, glasses
and pots should be placed upside
down in the baskets.
– Place tall, narrow, hollow items, e.g.
champagne glasses, in the center of
the basket rather than in the corners.
This ensures good water coverage.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Items not recommended for
We recommend:
dishwashing:
– When purchasing dishes and cutlery,
make sure they are dishwasher-safe.
– Wooden cutlery and dishes or items
with wooden parts, as they may
discolour and fade. In addition, the
glue used in these items is not
– Drinking glasses may become
cloudy over time. Fine glassware
should only be washed at low
dishwasher-proof. This may result in
wooden handles coming loose.
temperatures (see "Program guide")
This reduces the risk of clouding.
– Hand-crafted items, antiques,
valuable vases and decorative
glassware are also not
Attention!
Silverware that was previously cleaned
with a silver polish may still be damp
or spotted at the end of a program
since the water does not run off
dishwasher-proof.
– Plastic items which are not heat
resistant may become deformed.
smoothly. Dry with a soft cloth.
– Copper, brass, tin and aluminium
items may discolour or become dull.
Silver may discolour if it comes into
contact with foods that contain sulphur.
These include egg yolk, onions,
mayonnaise, mustard, legumes, fish,
fish brine and marinades.
– Colours painted over a glaze may
fade after a number of washes.
– Fine glassware and crystal may
become cloudy over time.
,Aluminum components (e.g.
grease filters) must not be washed
with caustic alkaline commercial or
industrial cleaning agents in the
commercial dishwasher. These may
damage the material. In extreme
cases they can cause a severe
explosive chemical reaction (such
as explosive hydrogen gas
reactions).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Typical load for 10 place settings with cutlery tray
Upper basket
Lower basket
Cutlery tray
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Typical load for 16 place settings with cutlery tray
Upper basket
Lower basket
Cutlery tray
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Upper basket
Foldable spikes
The rows of spikes can be folded down
to make more room for larger items
such as flat pans.
,For safety reasons use the
commercial dishwasher with both
the upper and lower baskets
inserted.
^ Press the yellow lever down a and
fold the spikes down b.
^ Load the upper basket with small,
lightweight or delicate items such as
cups, saucers, glasses, dessert
bowls, etc.
Cup rack
^ Fold the rack up to make room for tall
items.
Shallow pans can also be placed in
the upper basket.
Glasses can be leaned against the cup
rack to give them some support.
^ Long items such as soup ladles,
mixing spoons and long knives
should be placed horizontally across
the front of the upper basket.
^ Fold the cup rack down and lean the
glasses against it.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
XXL cup rack
^ You can also move one of the side
inserts of the cutlery tray to make
The cup rack can be set to two different
widths so that it can also accommodate
large cups.
more room for tall glasses.
Adjusting the height:
You can set the support bar to two
different heights.
^ Pull the cup rack upwards and click it
back into position at the required
width.
^ Pull the support bar upwards and
click it back into position at the
required height.
Glass support bar
The support bar will hold tall glasses
and stemware securely.
Use the low setting for small glasses
and tumblers.
Use the high setting for tall glasses and
stemware.
^ Fold the support bar down and lean
the glasses against it.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Adjusting the upper basket
Depending on the setting of the upper
basket, the following plate dimensions
can be accommodated.
In order to gain more space for taller
items in the lower or upper basket, the
upper basket can be adjusted to three
levels of about 2 cm height difference
between each level.
Dishwashers with cutlery tray
Adjusting
the upper
basket
Plate C in cm
The upper basket can also be set at an
angle with one side high and the other
side low to improve water drainage.
However, make sure that the basket
can slide smoothly in and out of the
cabinet.
Upper
Lower
basket
basket
Top
19
31
29
27
Middle
Bottom
21
23
^ Pull the upper basket out.
To adjust the upper basket upwards:
^ Lift the basket up until it clicks into
place.
To adjust the upper basket downwards:
^ Pull upwards on the levers at the
sides the basket.
^ Adjust the basket to the desired
height and then push the levers
securely back down into position.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Lower basket
^ Place larger and heavier items such
as plates, serving platters,
saucepans, bowls, etc. in the lower
basket.
It can also be used for glasses, cups,
small plates and saucers.
^ Place very large plates in the centre
of the lower basket.
When tilted, plates up to 35 cm in
diameter can be accommodated.
Commercial dishwasher with a
cutlery tray
Heavily soiled items
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Removable MultiComfort insert
Glass rack
The rear section of the lower basket is
used for washing cups, glasses, plates
and pots.
^ The glass rack can be folded up to
make more room for tall items.
^ Stemware, e.g. wine, champagne
and beer glasses, can be leaned
against the glass rack or suspended
from it.
You can remove the MultiComfort insert
to make more room for larger items
such as pots and pans.
The height of the glass rack is
adjustable.
To remove the insert
^ Press the yellow handle forwards and
remove the insert.
To replace the insert
^ Slide the glass rack to the desired
height until the catches click into
place at the top and rest on the
bottom.
^ Fit the insert into the lower basket
with the hooks going under the long
cross-piece a.
^ Press down on the insert until it clicks
into position b.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Glass support bar
The support bar will hold tall glasses
and stemware securely.
^ Press the yellow lever down a and
fold the spikes down b.
Bottle holder
^ Fold the support bar down and lean
the glasses against it.
The bottle holder can be used to wash
narrow items, e. g. milk and baby
bottles.
Foldable spikes
The spikes at the front are used for
washing plates, soup bowls, platters,
desert bowls, and saucers.
Both rows of spikes can be folded
down to create more room for larger
dishware, e. g. pots, pans and bowls.
^ If the bottle holder is not needed, lift it
up a and fold the sides down b, as
illustrated.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the commercial dishwasher
Cutlery
3D cutlery tray
If spoon handles do not fit between the
holders, then lay them the other way
round.
^ Arrange the cutlery in the tray as
shown.
To make unloading much easier,
cutlery should be grouped in zones,
one for knives, one for forks, one for
spoons, etc.
Spoon heads should be placed in
contact with at least one of the serrated
retainers on the base of the cutlery tray
to ensure that water runs off them
freely.
The upper spray arm must not be
blocked by items which are too big
(e.g. cake server).
You can use the yellow slide to adjust
the height of the middle section of the
cutlery tray to make more room for
large items of cutlery, such as serving
spoons and ladles.
The side sections of the tray can be
moved into the middle to accommodate
tall items of crockery in the upper
basket.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the commercial dishwasher
Detergent
Liquid detergent
This commercial dishwasher can be
fitted with a dispenser pump for liquid
detergent (optional accessory). It is
Powder detergents
Pour powder detergent into the
compartments of the detergent
dispenser.
connected externally.
Contact Miele Professional for
external liquid dispensing options.
Never use detergent tablets. The
tabs do not dissolve cempletely
during the short program runtimes.
See "Settings menu - External Dos." to
activate the dispenser pump and set
the detergent dosage.
^ Put detergent into the dispenser
compartments.
For special soiling or if using liquid
detergent, dispensed by a liquid
detergent pump, contact Miele for
advice on how to adapt the detergent
dosage to the particular
Detergent dosage
^ Unless otherwise specified,
depending on the degree of soiling,
pour 20 to 30 g of powder detergent
into compartment II.
circumstances.
Dispensing system maintenance
For heavily soiled dishware, pour a
small amount of detergent into
compartment I (see Program guide).
To ensure that the dispensing system
functions reliably it should be serviced
at specified intervals.
This work should only be performed by
Miele Service.
Failure to use the recommended
amount of detergent may adversely
affect the cleaning results.
The dispensing hoses in the DOS
module must be replaced every 1 -
11/2 years.
Whether you use powder or liquid
detergent, always observe the
manufacturer's instructions.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the commercial dishwasher
The cover is always open at the end of
,Avoid inhaling powder
a program.
detergents. Avoid swallowing
dishwasher detergent. Detergents
can cause chemical burns to nose,
mouth and throat. Consult a doctor
immediately if detergent has been
swallowed or inhaled.
Always keep detergent out of the
reach of children. Keep children
away from the commercial
dishwasher when the door is open.
There could still be detergent
residues in the cabinet. Do not add
detergent until you are ready to start
the commercial dishwasher,
^ Add powder detergent or detergent
tabs to the compartments and close
the cover.
Adding detergent
^ Do not forget to close the detergent
container. Otherwise, the detergent
might clump.
Detergent dosing aid
Compartment I holds a maximum of
10 ml, compartment II holds a
maximum of 50 ml of detergent.
Compartment II has dosage markings
of 20 and 30. They show the quantity in
ml when the door is open horizontally.
Depending on the manufacturer and
the grain size, the dosing aids indicate
the approximate quantity in grams.
^ Press the opening catch on the
detergent dispenser. The cover will
pop open.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the commercial dishwasher
Turning the commercial
Starting the program
dishwasher on
^ Start the program by closing the
door.
^ Turn on the water supply if it is off.
^ Open the door.
The In-operation indicator light comes
on to show that a program has started.
If any additional functions are selected,
the appropriate indicators will also light
up.
^ Make sure the spray arms can rotate
freely.
^ Press the - button to turn the
commercial dishwasher on.
Cancel a program only in the first
few minutes.
The factory-set Normal program will
appear in the display and the matching
indicator light will come on.
Otherwise important program steps
(e. g. water softening) may be
cancelled.
After a short while, the estimated time
for the selected program will appear in
the display.
You can also change the setting to the
program you last used to appear in the
display when the machine is switched
on (see Settings menu - Preselect
progr.)
Selecting a program
Choose the program according to the
type of dishware, soiling and
sanitization requirements.
See "Program guide" for a description
of the programs and their applications.
^ Use the X button to select the
desired program.
The indicator light next to the selected
program comes on.
When the indicator light next to 4
lights up, you can select additional
programs using the 4 ü button.
You can now select additional
functions (see "Additional functions").
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the commercial dishwasher
Time display
Standby
Before the program starts, the display
shows the runtime of the selected
program in hours and minutes. The
remaining runtime is displayed during
the program.
A few minutes after the last time a
button has been pressed or a few
minutes after the end of the program
the commercial dishwasher will switch
into Standby mode to save energy. The
display and the indicator lights will turn
off and only the - indicator light will
flash slowly.
Symbols will appear to indicate the
stage of the program:
1
8
%
(
G
Pre-wash
^ Press the - button to switch the
display and indicators back on.
Main wash
Interim rinse
Final rinse
Drying
If the commercial dishwasher is not
turned off after the program ends, after
a few minutes in standby mode it will
turn off completely (see "Settings menu
- Optimizing Standby").
O
End (Finished)
The runtime that is displayed may vary
for the same program. It depends on
the temperature of the incoming water,
the reactivation cycle, the quantity of
dishes, and other factors.
If Refill salt, Refill rinse aid or a fault
is displayed, or while a program is
running, the commercial dishwasher
will not switch to Standby mode.
When a program is selected for the first
time, the display shows an average
program runtime for warm water.
The refill messages can be turned
off to let the commercial dishwasher
go into Standby mode without first
refilling (see Settings menu - Refill
messages).
The runtimes change if the electrical
connection is changed.
However, fault messages cannot be
turned off.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the commercial dishwasher
End of program
Turning the commercial
dishwasher off
At the end of a program, the
In-operation indicator light will be
visible flashing slowly with the door
shut.
At the end of a program:
^ Open the door.
^ Turn the commercial dishwasher off
with the - button.
The program has finished when
O Finished or AutoOpen appears in
the display and the door is slightly ajar
(if applicable).
The commercial dishwasher will
continue to use electricity until it is
turned off with the - button.
If Extra drying was selected and
AutoOpen is active, the drying fan
will run for a few minutes after the
program has ended.
The water tap should be turned off if the
commercial dishwasher is not going to
be used for a longer period of time,
e. g. during vacation.
^ Open the door all the way to reset the
door latch.
Unloading the commercial
dishwasher
You can now unload the commercial
dishwasher.
Dishes tend to break and chip more
easily when they are hot.
The In-operation indicator light will go
out 10 minutes after the end of the
program if the door is closed.
Leave the dishes in the commercial
dishwasher until they are cool enough
to handle before unloading them.
,If automatic door opening is
switched off (see "Settings menu -
AutoOpen") and you want to open
the door after the program has
ended, open the door all the way.
This helps to prevent steam damage
to the countertop because the fan
stopped running.
The dishes will cool much faster if you
open the door fully when the program
has ended.
Unload the lower basket first, then the
upper basket and then the cutlery tray
(depending on model).
This will prevent water from the upper
basket and cutlery tray from dripping
onto dishes in the lower basket.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the commercial dishwasher
Interrupting a program
Changing a program
A program will be interrupted as soon
as the door is opened.
If the detergent dispenser cover has
already opened, powder detergent
must be added for the new program
unless liquid detergent is being
dispensed automatically with a
dispensing module.
When the door is closed again, the
program will continue from where it was
interrupted.
,Water in the commercial
dishwasher may be hot. Risk of
scalding!
If a program has already started and
you wish to change it:
Only open the door if absolutely
necessary and be very careful.
Before closing the door again, leave
it slightly ajar for approx.
^ Open the door.
^ Turn the commercial dishwasher off
with the - button.
20 seconds. This will allow the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks shut.
^ Switch the machine on again with the
- button.
^ Use the program selector button to
select the desired program.
^ Start the program by closing the
door.
The In-operation indicator light comes
on to show that a program has started.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional functions
Extra drying
For better drying results and to reduce
the amount of steam that escapes when
the door is opened, the Extra drying
function extends the fan runtime at the
end of the program.
This function is not available for all
programs.
When Extra drying is selected, the total
program runtime will increase by
approx. 20-30 minutes, depending on
the program.
^ Open the door.
^ Press the - button to turn the
commercial dishwasher on.
The - indicator light will come on.
^ Select the desired program.
^ Press the G+ button.
The G+ indicator light lights up if the
function is available for the selected
program.
^ Start the program by closing the
door.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional functions
Delay start
If you do not close the door within a few
seconds after you have set the Delay
start time, the program runtime will
appear in the display again. You will
have to set the Delay start time again.
The start time of a program can be
delayed, for instance to take
advantage of cheaper electricity rates
at night. You can delay the start time by
30 minutes to 24 hours. The delay is set The time starts counting down in
in 30 minute increments.
minutes until the program start time.
When the set time is reached, the
program selected will begin
automatically. The in-operation control
light will come on.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry if necessary.
Otherwise the detergent could
clump and not rinse out completely.
Starting a program before Delay start
has elapsed:
^ Open the door.
A program can be started before the
Delay start time has elapsed. Just do
the following:
^ Press the - button to turn the
commercial dishwasher on.
^ Open the door.
The - indicator light will come on.
^ Turn the commercial dishwasher off
with the - button.
^ Use the program selector button to
select the desired program.
^ Switch the machine on again with the
- button.
^ Press the , button.
The last Delay start time will appear in
the display. The , indicator light
comes on.
^ Use the program selector button to
select the desired program.
^ Set the desired Delay start time using
the , button.
^ Start the program by closing the
door.
If you keep the , button pressed, the
time will increase automatically up to
24:00 h. To start at 30 minutes again,
press the , button twice.
The In-operation indicator light comes
on to show that a program has started.
^ Close the door.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional functions
BrilliantLight
This dishwasher has interior lighting.
When the door is open the lighting will
switch off automatically after
15 minutes.
You can also switch off the interior
lighting permanently.
^ Half open the dishwasher door and
quickly swing it back and forth three
times. When doing this, open the
door wide enough for the interior
lighting to switch on and off.
The lighting will now be switched off
permanently.
^ To switch the lighting back on again,
quickly swing the half-opened door
back and forth three times again.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the door and the door
seal
Check the overall condition of your
commercial dishwasher regularly
(approx. every 4 - 6 months). This
will help to prevent problems.
^ Wipe the door seals regularly with a
damp cloth to remove food deposits.
^ Wipe food and drink residues off the
commercial dishwasher door.
,The outer surfaces of the
commercial dishwasher are
susceptible to scratching.
Contact with unsuitable cleaning
agents can alter or discolour the
outer surfaces.
These surfaces are outside the wash
cabinet and are not reached by water
from the spray arms.
Cleaning the reflector panel
The reflector panel for the In-operation
indicator light is situated in the
Cleaning the wash cabinet
coverplate underneath the worktop.
The wash cabinet is largely
^ The reflector panel should only be
wiped with a damp cloth or a suitable
cleaning agent designed for use on
plastic.
self-cleaning, provided that the correct
amount of detergent is always used.
If, however, there are limescale or
grease deposits in the cabinet, these
can be removed with a special
dishwasher cleaner (available from
Miele Service).
Washing at low temperatures can allow
germs and odours to build up inside
the appliance. To prevent this, run an
intensive program with detergent after
approx. 20 program cycles with low
temperatures.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the control panel and To avoid damage to the outer
surface, do not use:
front of the commercial
dishwasher
– Cleaning agents containing soda,
ammonia, acids or chlorides,
,Remove any soiling immediately.
Otherwise it might become
impossible to remove and could
cause an alteration or discolouration
of the surfaces.
– limescale removers,
– abrasive cleaners such as scouring
powder, scouring liquid or pumice
stones,
– cleaners containing solvents,
– stainless steel cleaners,
– dishwasher cleaner,
– oven sprays,
^ The control panel should only be
wiped with a damp cloth.
^ Clean the front of the appliance with
a clean sponge, dishwashing liquid
and warm water. Then wipe dry with
a soft cloth.
– glass cleaners,
You can also use a clean, damp
microfibre cloth without detergent.
– rough scouring sponges or brushes
such as pot scrubbers,
^ For surface disinfection use low or
intermediate-level disinfectants only.
– magic erasers,
– sharp metal scrapers,
– steam cleaning devices,
– Disinfectants containing
Hydrogenperoxide, Paracetic Acid,
Glutaraldehyde,
Orthophthalaldehyde to prevent
damage to CleanTouchSteel and
fascia printing.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Checking the filters in the
wash cabinet
Cleaning the filters
^ Turn the commercial dishwasher off.
The filter combination in the base of the
wash cabinet captures large dirt
particles from the wash water. This
prevents them from reaching the
circulation system and re-entering the
cabinet through the spray arms.
,This commercial dishwasher
must not be used without all the
filters in place!
Collection of coarse particles may
cause the filters to clog over time. The
dirtier the dishware the sooner the
filters need cleaning.
^ Turn the handle towards the back to
release the filter combination a.
The message Check filters is
factory-set to appear in the display after
every 50 program cycles.
^ Take the filter combination out b,
remove any coarse particles and
rinse the filter well under running
water. Use a brush if necessary.
You can turn off the filter check or set
the frequency to 30 to 60 program
cycles (see Settings menu - Filter
check).
,Ensure that large particles do
not get into the circulation system
and clog it.
^ Check the filter combination.
^ Clean it, if necessary.
^ Then press the centre button to
confirm the message.
The last selected program is displayed
and the respective indicator light will
come on.
After a short while, the estimated
program runtime is displayed.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
The cover must be opened to clean the ^ Replace the filter combination so that
inside of the filter:
it lies flat in the bottom of the wash
cabinet.
^ Push the clips together in the
direction of the arrows as shown a,
and open the coverb.
^ Lock the filter in place by turning the
handle forward until the arrows face
each other.
^ Clean all parts under running water.
,The filter combination must be
inserted correctly and locked.
Otherwise large dirt particles can
get into the circulation system and
clog it.
^ Close the cover so that the lock
engages.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the spray arms
^ Remove the lower basket.
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be checked
regularly (approx. every 4 - 6 months).
^ Turn the dishwasher off.
Remove the spray arms as follows:
^ Pull out the cutlery tray (if present).
^ Pull the lower spray arm firmly
upwards to remove.
^ Push the upper spray arm up to
engage the inner ratchet and
unscrew the spray arm.
^ Lift the middle spray arm up a to
engage the ratchet and unscrew the
spray arm b.
^ Use a pointed object to push the
food particles in the spray arm jets
into the spray arm.
^ Rinse the spray arms thoroughly
under running water.
^ Replace the spray arms and check
that they rotate freely.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
You can easily resolve many of the minor problems you may encounter during
everyday use. This will save you time and money because you do not have to call
Miele Service.
,Repairs must only be carried out by Miele Service. Unauthorized repairs
could cause personal injury or damage to the machine.
Technical faults
Problem
Possible fault
Solution
The commercial
The door is not properly Push the door firmly shut.
dishwasher does not closed.
start.
The commercial
Insert the plug.
dishwasher is not
plugged in.
The circuit breaker has
tripped.
Reset the circuit breaker.
(See data plate for the
correct fuse rating).
The commercial
dishwasher is not
switched on.
Press the - button and
select a program.
The commercial
dishwasher stops
during a program.
The circuit breaker has
tripped.
– Reset the circuit breaker.
(See data plate for the
correct fuse rating).
– If the circuit breaker trips
again, contact Miele Ser-
vice.
After the program has The reflector panel was
Re-fit the reflector panel
correctly (see Installation
diagram).
started, the
not correctly fitted.
In-operation indicator
light is not visible.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible fault
Solution
The In-operation
indicator is flashing
quickly.
Before fixing the fault:
– Turn the commercial
dishwasher off with the -
button.
The buzzer is sounding.
One of the following
messages appears in
the display:
; Fault FXX
There may be a
technical fault.
After a few seconds:
– Switch the commercial
dishwasher back on.
– Select the desired
program.
– Close the door.
If the error message is
displayed again, there is a
technical fault.
– Contact Miele Service.
L Waterproof
The Waterproof system – Close the water tap.
has reacted.
– Contact Miele Service.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Faults in the water intake or water drain
Problem
Possible fault
Solution
The In-operation
indicator is flashing
quickly.
The buzzer is
sounding.
One of the following
messages appears in
the display:
2 Open water supply
The water tap is closed. Open the water tap all the
way.
2 Water intake
Before fixing the fault:
– Turn the commercial
dishwasher off with the -
button.
There is a problem with
the water intake.
– Open the water tap all the
way.
– Check the water inlet filter
and clean it if necessary
(see "Maintenance").
– The water pressure at the
water connection is less
than 30 kPa (4.4 psi).
Consult a plumber.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible fault
Solution
The In-operation
indicator is flashing
quickly.
Before fixing the fault:
– Turn the commercial
dishwasher off with the -
button.
The buzzer is
sounding.
Fault in the water
drainage.
– Clean the filter combination
(see "Cleaning and care").
The following
message appears in
the display:
There might be water in
the wash cabinet.
– Clean the drain pump (see
"Maintenance").
2 Drain
– Clean the non-return valve
(see "Maintenance").
– Remove any kinks or high
loops in the drain hose.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems with the commercial dishwasher
Problem
Possible fault
Solution
The indicators and
The indicators and the
Press the -
button to come out of Standby
display are dark. Only display turn off
the - indicator
flashes slowly.
automatically to save
mode.
energy (Standby mode).
The interior lighting
does not come on
when the door is
opened.
The lighting has been
switched off
Switch the lighting back on
again (see "Additional
permanently.
functions, BrilliantLight").
The following fault
message is
The salt reservoir cover – Close the salt reservoir
is not properly closed.
cover.
displayed:
If the salt reservoir cover
opened during a program:
F Salt container lid
The buzzer sounds
during the program
and the In-operation
indicator light
– Switch the dishwasher off
and then on again with the
- button.
– Re-start the program.
flashes.
The buzzer sounds
during a program.
The following fault
message appears in
the display:
The middle spray arm is Open the commercial
blocked by dishware.
dishwasher door and
rearrange items blocking the
spray arms.
The spray arm jets of the – Turn the commercial
middle arm are clogged.
dishwasher off with the -
button.
Then:
– Clean the spray arm (see
"Cleaning and care").
: Spray arm blocked
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible fault
The dispenser was wet
when detergent was
Solution
There are detergent
residues in the
Make sure the dispenser
is dry before adding
detergent.
dispenser at the end of added.
a program.
The detergent dispenser Detergent residue is
Remove the detergent
residue.
cover will not close.
The inside of the door
blocking the latch.
This is caused by the
None.
and/or the interior walls drying
are wet after a program system and does not
The moisture evaporates
after some time.
has finished.
indicate a fault.
There is water in the
wash cabinet at the end
of a program.
Before fixing the fault:
– Turn the commercial
dishwasher off with the
- button.
The filter combination in
the wash cabinet is
clogged.
Clean the filter
combination (see
"Cleaning and care").
The drain pump or
non-return valve is
blocked.
Clean the drain pump or
the non-return valve (see
"Maintenance").
There is a kink in the drain Remove the kink from the
hose.
Some programs run for No fault!
drain hose.
Select a different program
a long time.
Certain programs have a
long runtime.
(see "Program guide").
Although AutoOpen is
selected, the door
remains closed at the
end of the ProSpeed
program.
No fault!
To improve the drying,
raise the rinse
Because of the
program's short runtime, temperature (see "Setting
the AutoOpen function is menu - High temp rinse").
not available for the
ProSpeed program.
Therefore the dishware
is still moist.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Noises
Problem
Possible fault
Solution
There is a knocking
noise in the wash
cabinet.
A spray arm is hitting the Interrupt the program and
dishware.
rearrange items blocking
the spray arms.
There is a rattling
noise in the wash
cabinet.
Dishware is moving
around in the wash
cabinet.
Interrupt the program and
rearrange loose pieces.
A foreign object (e. g.
cherry pit) has become
Remove the foreign object
from the drain pump (see:
lodged in the drain pump. Cleaning the drain pump
and non-return valve)
This has no effect on the
functioning of the
There is a knocking
noise from the water
pipe
This may be caused by
the installation or the
diameter of the water pipe. commercial dishwasher. If
in doubt, contact a
plumber.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Poor cleaning results
Problem
The dishes are not The dishes were not loaded See Loading the commercial
clean. correctly. dishwasher.
The program was not suitable Select a more suitable
Possible fault
Solution
for the requirements.
program (see Program
guide).
Not enough detergent was
dispensed.
Use more detergent, or
switch to another detergent.
The spray arms are blocked Check by turning the spray
by dishware. arms and rearrange the
dishes if necessary.
The filter combination in the Clean the filter combination
wash cabinet is clogged or or insert it correctly.
not correctly inserted. Clean the spray arm jets, if
The spray arm jets might be necessary (see Cleaning
clogged as a result. and care).
The non-return valve is stuck Clean the drain pump and
in the open position. Dirty the non-return valve (see
wash water will run back into Maintenance).
the wash cabinet.
There are streaks The rinse aid dosage is set
on the glasses and too high.
cutlery. The
Reduce the dosage (see
Settings menu - Rinse aid).
glasses take on a
bluish shimmer;
the deposits can
be wiped off.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Dishes are not dry, The rinse aid dosage is set
or glasses and too low or the rinse aid
cutlery are spotty. reservoir is empty.
Possible fault
Solution
Refill the reservoir, increase
the dosage, or switch the
rinse aid product when
refilling (see Rinse aid).
Dishes were taken out too
soon.
Leave dishes in longer (see
Operating the commercial
dishwasher).
White residue is
visible on the
dishware.
The rinse aid dosage is too Increase the dosage (see
low.
Settings menu - Rinse aid).
The salt reservoir is empty.
Refill the salt reservoir (see:
Before using for the first time
- Filling the salt reservoir).
Clouding occurs
on glassware and
cutlery; the
The water softener setting is Increase the water softener
too low. setting (see Settings menu /
Water softener).
deposit can be
wiped off.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible fault
Detergent deposits.
Solution
Glasses have a
brownish-blue
discolouration; the
deposit cannot be
wiped off.
Switch to another detergent
right away.
Glasses are dull and The glasses are not
There is no remedy.
Use only dishwasher safe
glasses.
discoloured; the
deposit cannot be
wiped off.
dishwasher-safe. Surface
changes occur.
Tea or lipstick stains The wash temperature of
have not been
completely removed. too low.
The bleaching effect of the Switch to another detergent.
Select a program with a
the selected program was higher wash temperature.
detergent is too low.
Plastic parts are
discoloured.
Natural dyes, e.g. from
carrots, tomatoes or
Use more detergent (see
Operating the dishwasher -
ketchup, may be the cause. Detergent).
Not enough detergent was This discolouration is
used or the bleaching effect permanent.
of the detergent is too low.
There are rust stains The affected items are not There is no remedy.
on the cutlery.
corrosion resistant.
Use only dishwasher safe
cutlery.
No program was started
after refilling salt. Salt
Always start the "Pre-rinse"
program without a load after
residues entered the wash refilling salt.
cycle.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the water inlet screen
There is a screen in the screw
connection of the water inlet hose to
protect the water inlet valve. The screen
must be cleaned when dirty, otherwise
insufficient water will flow into the wash
cabinet.
,The plastic housing of the water
connection contains an electric
valve. The housing must not be
immersed in water.
Recommendation
^ Take the seal ring out of the screw
connection.
If the water supply contains a large
amount of insoluble substances, we
recommend fitting a large-area filter
between the tap and the water inlet
hose.
^ Use needlenose pliers to pull out the
screen, then clean it.
^ When removing the screen, take care
not to pull out or displace the flow
regulator behind it.
This filter is available from Miele Ser-
vice.
^ Replace the screen and seal. Make
sure they are positioned correctly.
To clean the screen:
^ Disconnect the commercial
dishwasher from the electric power
supply. Always switch the appliance
off before unplugging it.
^ Reconnect the water inlet valve to the
tap. Make sure not to cross-thread
the connection.
^ Turn the tap back on.
If the connection leaks it might be too
loose or cross-threaded.
^ Close the water tap.
^ Unscrew the water inlet valve.
Unscrew and reconnect the water
inlet valve correctly.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the drain pump and
non-return valve
If there is water in the wash cabinet at
the end of a program, the water was not
pumped out properly. The drain pump
or the non-return valve might be
clogged. However, they are easy to
clean.
^ Disconnect the commercial
dishwasher from the electric power
supply. Always switch the appliance
off before unplugging it.
^ Remove the filter combination from
the wash cabinet (see Cleaning and
care - Cleaning the filters).
The drain pump is located beneath the
non-return valve (arrow).
^ Remove all foreign objects from the
drain pump (glass splinters are
^ Scoop the water out of the cabinet
using a small container.
particularly difficult to see). Turn the
drain pump impeller by hand to
check for objects. It is normal that the
rotation of the impeller feels jerky.
^ Carefully replace the non-return
valve.
,Make sure the catch engages
correctly!
Be careful not to damage any
components when cleaning the
drain pump and the non-return
valve.
^ Press the catch for the non-return
valve inwards a.
^ Pull the non-return valve out b and
rinse it thoroughly under running
water.
^ Remove all foreign objects from the
non-return valve.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Making better use of the commercial dishwasher
Optional accessories for this commercial dishwasher are available from Miele.
You want to...
You need...
...wash the individual parts of the
Miele Cappucinatore
... a Cappucinatore insert for the
upper basket
...wash additional cutlery
... a cutlery basket for the lower
basket
...wash long-stemmed glasses
...a support bar for the lower basket
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
Application
Detergent
Follow the detergent manufacturer's
instructions
1)
1)
Compartment I
Compartment II
For fresh, non-sticky food residues
For normal, slightly dried food residues
For burned-on, very adherent, very dry,
I
ProSpeed
20 - 30 g
J
Universal
20 - 30 g
20 - 30 g
20 - 30 g
20 - 30 g
20 - 30 g
20 - 30 g
20 - 30 g
K
Pots & Pans
1)
starchy or albuminous food residues.
10 g
Special glassware program
!
Glasses
Sanitizing program with 70°C or optional
75°C sanitizing.
M
SaniWash
Special plastics program
Plastics
Special beer glass program.
Glass no
rinse aid
(The glasses do not dry through their own
heat after the program has ended and might
have to be dried by hand).
Program for completely washing a full load of
Normal*)
normally soiled dishware.
For rinsing off very soiled dishware, e. g. to
remove soiling in advance or to prevent
residues from drying on the dishware when it
is not worth running an entire program.
Rinse and
Hold
*) From the aspect of combined energy and water consumption, this program is the most efficient for
washing normally soiled dishes.
(Program sequence can not be altered)
1)
see "Operating the commercial dishwasher - Detergent"
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program sequence
Pre-
Main
wash
Interim
rinse I
Interim
Final rinse
Drying
Extra
Auto
Water
plus
2)
rinse
rinse II
drying
Open
4)
X
X
(X)
X
(X)
(X)
(X)
(X)
(X)
(X)
(X)
(X)
(X)
65°C
1 min
65°C 3)
10 s
X
30 s
X
(X)
(X)
(X)
(X)
X
(X)
(X)
(X)
(X)
(X)
65°C
65°C 3)
10 min 3 min
1.5 min
X
X
X
X
75°C
8 min 10 min 3 min
65°C 3)
1.5 min
X
X
X
50°C
1 min
50°C
1 min
3 min
X
X
X
X
X
75°C
70°C 3)
8 min 10 min 3 min
3 min 30 min
X
X
X
X
X
50°C
60°C
30 s
10 min 1 min
5 min
X
45 min
X
X
5)
—
1 min
50°C
1 min
3 min
X
X
X
X
(X)
41.5°C
49.5°C
47 min 3 min
5 min 45 min
X
Cold
8 min
X = part of the program
(X) = additional, optional program steps
2)
Interim rinse II, must be programmed by a Miele service technician.
3)
4)
5)
Optional temperature increase to 75°C.
No AutoOpen at the program end because of the short program runtime.
Without rinse aid and with cold water.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
Consumption 6)
Duration 6)
Electrical energy
Water
Cold water
Water - Hot
55°C
Cold water
Water - Hot
55°C
connection
(15°C)
connection
(15°C)
I
ProSpeed
7)
7)
1.7 kWh
1.7 kWh
2.0 kWh
1.1 kWh
2.3 kWh
1.4 kWh
0.7 kWh
1.2 kWh
0.03 kWh
0.9 kWh
1.0 kWh
1.0 kWh
0.4 kWh
1.3 kWh
0.5 kWh
0.4 kWh
0.5 kWh
0.03 kWh
17 l
17 l
23 l
17 l
23 l
23 l
17 l
17 l
6.5 l
35 min
25 min
J
Universal
7)
7)
48 min
38 min
K
Pots & Pans
7)
7)
64 min
52 min
!
Glasses
7)
7)
29 min
20 min
M
SaniWash
101 min
94 min
24 min
124 min
11 min
89 min
81 min
19 min
115 min
11 min
Plastics
Glass no
rinse aid
Normal*)
Rinse and
Hold
6)
7)
Values are calculated for a connected load of 4.2 kW. In practice, these may vary considerably due
to differing conditions. The displayed runtime adjusts to the local conditions.
The figure refers to the wash duration without drying.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
Repairs
Program updates
If you cannot fix a fault with the help of
this manual, please contact:
The program update function keeps
your appliance up to date with
advances in dishwashing technology.
– Miele Service.
Program updates can only be
performed by Miele Service.
^ When contacting the service
department, you will need the model
and serial number of your appliance.
These can be found on the data plate
along the right edge of the open door.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
The commercial dishwasher must only
be operated with the voltage, frequency
and fuse rating shown on the data
plate.
,All work on the electrical
connection must be carried out by
Miele Service.
A conversion may only be performed
according to the attached conversion
diagram and wiring diagram.
– The electrical installation must be in
compliance with current local and
national safety regulations.
– The plug connection must comply
with national regulations. (The
electrical outlet must be accessible
after the appliance has been
installed.) This facilitates access for
electrical safety checks, for example
when the appliance is being repaired
or serviced.
Converting the machine to a
different type of power supply can
lead to longer program runtimes
resulting in increased energy
consumption.
The values declared on the label will
only be achieved if the machine
remains in the state it was delivered
in.
– If the appliance is hard wired, a
multiple-pole circuit breaker must be
installed. The contact opening at the
main breaker must be at least 3 mm
wide and lockable in the open
position.
The data plates are at the back of the
commercial dishwasher and along the
right edge of the open door.
The wiring diagram comes with the
commercial dishwasher.
– If necessary, an equalization of the
potentials must be carried out.
The conversion diagram is attached to
the base panel behind the plastic base
cover.
– If replacing the power cord, use only
original Miele replacement parts or a
suitable cord with core cable ends.
– For technical data, see the data plate
or the attached wiring diagram!
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
The PG 8083 SCVi comes equipped
with a 10/4 AWG cord and a
120V/208-240 V, 60 Hz NEMA 14-30P
plug.
Power connection options
If available, the dishwasher may be
connected to a AC 120 V, 60Hz power
supply.
Converting the machine to a different
type of power supply can lead to longer
program runtimes resulting in increased
energy consumption.
120V 208-240V
Rated Load (kW) 1.5
Fuse Rating 15A
3.9-4.2
30A
To connect the machine to a 120 V
supply, the standard power cord must
be removed and replaced by a 14/3
AWG cable of the type: S, SE, SO,
SOO, ST, STO or STOO. A 2 pole,
3-wire grounding plug and receptacle
are recommended (NEMA Type 5-15P).
The conversion diagram and wiring
diagram are secured to the inner side
of the toe kick.
Removing the toe kick
Disconnect the machine from the
mains electrical supply.
^ Remove the fixing screws from the
toe kick and take it off.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Removing the base cover
Connecting the potential equalization
The electrical terminal is located behind The connection screw (8) for potential
the front cover in the middle of the
commercial dishwasher base.
equalization is located at the back of
the commercial dishwasher.
,Disconnect the commercial
dishwasher from the electrical power
supply!
^ Unscrew the 2 screws (left and right)
and remove the base panel.
^ Screw the base panel back on when
work on the connection is finished.
Follow the installation diagram
included with the commercial
dishwasher!
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
The Miele waterproof system
– The commercial dishwasher is
equipped with a safety system for the
protection of drinking water and may
be connected to the water supply
without a non-return valve, if national
regulations permit.
Providing the dishwasher was installed
correctly by a qualified technician, the
waterproof system will protect you from
water damage throughout the lifetime of
the machine.
– The water pressure (flow pressure at
the water connection) must be
between 30 und 1000 kPa (4.4 and
145 psi).
Water intake
,The water in the commercial
dishwasher is NOT safe to drink!
If the water pressure is lower, the
message Water intake is displayed
(see Frequently asked questions).
If the water pressure is higher, a
pressure reducer must be installed.
– The commercial dishwasher must be
connected to the water supply in
accordance with local regulations.
– A water shut-off valve with a 3/4"
thread is required for connection to
the water supply. The valve should
be easily accessible, because the
water supply must be turned off
when not in use.
– The water supply must at least meet
the standards for drinking water.
A high iron content can leave a rustfilm
on dishware and the commercial
dishwasher itself.
When the chloride content in the
domestic water supply is above
100 mg/l, the risk of corrosion damage
to dishware is greatly increased.
– The inlet hose is 1.7m long, with a
2 cm female hose thread. A 1.5 m
extension hose is available (flexible
metal hose certified for a pressure of
14000 kPa/ 2031 psi). The dirt
screen and the flow regulator in the
threaded water connection must not
be removed.
– The commercial dishwasher can heat
its own water to the temperature
required by the wash program. This
allows for connection of the mashine
to either a hot (max. 60 °C) or cold
water source.
For lowest energy consuption and
fastest possible wash times connect
the commercial dishwasher to a hot
water source. All programs use hot
water in the rinse cycles.
– In certain regions (e.g. mountain
regions) the water composition may
cause precipitates to form, requiring
the use of softened water for the
commercial dishwasher.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
,To prevent damage to the
commercial dishwasher, make sure
all air has been bled from the supply
line.
! The inlet hose must not be
shortened or damaged in any way
because it contains electrical wires
(see illustration).
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Water drainage
Venting the drainage system
– The drain is equipped with a
non-return valve which prevents
waste water from flowing back into
the commercial dishwasher through
the drain hose.
The drain must be vented if the
connection to the building' s drainage
system is lower than the roller guides
for the lower basket in the door.
Otherwise the water inside the
commercial dishwasher may siphon out
during the wash program.
– The commercial dishwasher drain
hose should be connected to a
separate drain for the commercial
dishwasher only.
For venting:
^ Open the commercial dishwasher
door completely.
If no separate drain is available, we
recommend connecting it to a
dual-chamber siphon.
– The commercial dishwasher is
equipped with a 1.5 m flexible drain
hose with an internal diameter of
22 mm.
Connecting clamps are provided
with the commercial dishwasher.
– An additional hose and adapter can
be used to extend the drain hose.
The drain hose length must not
exceed 4 m and the pumping height
must not exceed 1 m!
– The drainage system must be able to
accommodate a minimum drainage
flow of 16 l/min.
^ Pull the lower spray arm up to
remove.
^ Cut off the cover of the vent valve in
the wash cabinet.
– The drain hose must not be
shortened!
,Make sure the hose is not
kinked, squashed or pulled too tight.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Model
PG 8083 SCVi
Commercial dishwasher
Height
84.5 cm
(adjustable +6.5 cm)
Installation height
Min. 84.5 cm (+ 6.5 cm)
Width
59.8 cm
60 cm
Installation width
Depth
57 cm
Weight
57.5 kg
Voltage
Connected load
see data plate
Fuse rating
Power consumption when switched off
0.30 W
2.00 W
Power consumption when not
switched off
Water pressure (flow pressure)
30 - 1000 kPa
(4.4 - 145 psi)
Cold or hot water
supply
max. 60°C
Water hardness
max. 36 gr/gal
max. 1 m
Drainage pumping height
Drain hose length
Power cable length
Capacity
max. 4 m
ca. 1.7 m
16 standard table settings
Noise emissions
Sound power level in Lw A
Sound pressure level LpA
49 dB (A)
38 dB (A)
Certifications
CSA Approval
CSA Energy Certification, Energy Guide
Label, Energy Star
Manufacturer's address
Miele & Cie. KG, Carl-Miele-Str. 29,
33332 Gütersloh, Germany
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
"Settings" menu for changing
standard settings
Language
!
The display can be set to different
languages.
Opening the "Settings "menu
The displayed language can be
^ If the commercial dishwasher is on,
press the - button to turn it off.
changed in the Language ! submenu.
^ Select the desired language and
press the centre button to confirm.
^ Press and hold the X button.
^ Turn the commercial dishwasher on
with the - button and hold the X
button down for at least 4 more
seconds.
The flag after the word Language
serves as a guide if an unfamiliar
language is set.
In this case, select the menu option
with a flag until the Language !
submenu is displayed.
The first option of the Settings menu will
appear in the display and all the
indicator lights will come on.
See the Display functions section for
details.
^ Select the menu setting you wish to
change.
The selected options in the submenu
are marked with a check (.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Water hardness
Value to
set
Your commercial dishwasher comes
with with a water softener.
gr/gal
mmol/l
°ppm
CaCO3
in the display
You must set the system to the water
hardness level of your water supply.
1
0,2
0,4
0,5
0,7
0,9
1,1
1,3
1,4
1,6
1,8
2,0
2,2
2,3
2,5
2,7
2,9
3,1
3,2
3,4
3,6
3,8
4,0
4,1
4,3
4,5
4,7
4,9
5,0
5,2
5,4
5,6
5,8
5,9
6,1
6,3
6,5
20
1
2
40
2
3
50
3
– The commercial dishwasher must be
programmed to exactly match the
hardness of your water.
4
70
4
5
90
5
6
110
130
140
160
180
200
220
230
250
270
290
310
320
340
360
380
400
410
430
450
470
490
500
520
540
560
580
590
610
630
650
6
7
7
– Your local waterworks can tell you
the water hardness level in your area.
8
8
9
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
– Where the water hardness fluctuates
(e.g. 17 - 25 gr/gal), always program
the commercial dishwasher to the
higher value (in this example
25 gr/gal).
The set water hardness is marked
with a check (.
^ Select the hardness of your water
and press the centre button to
confirm.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Rinse aid
Buzzer
For best results the rinse
When the buzzer is activated, an
audible tone sounds at the end of a
program and when there is a fault.
aid dosage can be adjusted. The
dosage can be set between 0-6 ml.
The factory setting is 3 ml of rinse aid.
Buzzer at the end of a program
If the dishes are spotty:
– Use a higher rinse aid setting.
You will hear the buzzer at the end of a
program. It will sound four times in
intervals with a noticeable pause in
between. Switching the dishwasher off
will switch the buzzer off.
If the dishes are cloudy or streaky:
– Use a lower rinse aid setting.
^ Select the desired amount of rinse
aid and press the centre button to
confirm.
Buzzer when there is a fault
In the event of a fault, the buzzer will
sound four times in intervals with only a
very short pause in between.
The buzzer which sounds when there
is fault cannot be deactivated.
Setting the buzzer volume
There are seven different volume
settings. If no volume is selected, the
buzzer is deactivated.
^ Select the desired volume and press
the centre button to confirm.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
AutoOpen
Optimizing Standby
To improve drying, the door
A few minutes after the last button is
automatically opens a little at the end of pressed or a few minutes after the end
a program, except for Rinse & Hold,
ProSpeed and Glass no rinse aid (see
Program guide).
of the program the commercial
dishwasher will switch to Standby mode
to save energy. The display and the
indicator lights are switched off and
only the - flashes slowly.
If you do not turn the commercial
dishwasher off when the program has
ended, it will switch off automatically
after several minutes in Standby.
With the Universal, Pots & Pans and
Glasses programs, AutoOpen can only
be activated by selecting Extra drying
(see Additional functions - Extra
drying).
You can also deactivate this function.
You can also deactivate the Optimizing
standby function. The display and the
indicator lights do not go out, and the
commercial dishwasher turns off 6
hours after the end of the program.
This results in higher energy
^ Select the desired setting and press
the centre button to confirm.
,If you have deactivated the
AutoOpen function but would still
like to open the door at the end of a
program, make sure that you open
the door completely. Otherwise
steam from the commercial
consumption.
^ Select the desired setting and press
the centre button to confirm.
dishwasher could damage the edge
of the countertop because the fan is
no longer running.
If Refill salt, Refill rinse aid or a fault
is displayed, or while a program is
running, the commercial dishwasher
will not switch to Standby mode.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Filter check
The refill messages can be turned
off without first refilling to let the
commercial dishwasher go into
Standby mode.
You can set the length of the interval
between filter checks as a reminder.
You can set an interval between 30 and
60 wash cycles.
But the fault messages cannot be
turned off.
The factory setting is an interval of 50
wash cycles.
Refill messages
You can also deactivate this function.
If you want the commercial dishwasher
to switch to Standby mode in spite of
the Refill messages, you can switch
both indicator lights off together.
^ Select the desired setting and press
the centre button to confirm.
External Dos.
^ Select the desired setting and press
the centre button to confirm.
Activate automatic dispensing of liquid
detergent if you have installed the
optional external dosing module.
Brightness
^ Select the desired setting and press
the centre button to confirm.
There are seven different brightness
levels for the display.
The setting will remain active until
you deactivate External dos.
^ Select the desired brightness and
press the centre button to confirm.
Contrast
Contact Miele Professional for
external liquid dispensing options.
The dispensed dosage may only
altered by Miele Service.
There are seven different contrast
levels for the display.
^ Select the desired contrast and press
the centre button to confirm.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Detergent dosage
Setting the dosage:
This function becomes visible when
External dos. is activated.
Set the dosage according to the
detergent manufacturer's
recommendations.
The detergent dosage can be set in
millilitres or percent. Contact Miele
Professional for the setting.
The commercial dishwasher uses
approx. 6.5 l of water for the main wash
cycle.
– Amount in ml
The factory setting is 30 ml.
Example 1 - Measurement in ml:
The dosage can be set from 10 - 100 The detergent manufacturer
ml in 2 ml increments.
recommends 4 ml of detergent per litre
of water.
– Amount as %
6.5 l x 4 ml/l = 26 ml.
The factory setting is 0.50%.
The dosage can be set from 0.17 -
detergent dosage in
1.67% in increments of 0.03 - 0.04%. ml/L x 0.17% x 6.5L / 10 ml
The detergent manufacturer
recommends 4 ml of detergent per liter
of water.
Dispensing concentration =
4ml/L x 0.17% x 6.5L / 10ml = 0.442%
^ Select the desired amount of
detergent or the dosage
concentration and press the centre
button to confirm.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Venting the Dos. system
High temp rinse
The Dos. system will not dispense
reliably if there is air in the system.
For better drying, the rinse temperature
can be increased. This function is not
available for all programs (see Program
guide).
The Dos. system must be vented
– if it is being used for the first time,
^ Select the desired setting and press
the centre button to confirm.
– if the liquid detergent reservoir was
not refilled on time and the Dos.
system was sucked empty.
Water plus
When selected, more water will be used
for the wash cycle. This function is not
available for all programs (see Program
guide).
,To ensure that the Dos. system
functions properly, prior to venting
make sure that the detergent
container is full enough and that the
dispensing lances are firmly
^ Select the desired setting and press
the centre button to confirm.
attached to the containers.
^ Select Start venting and press the
centre button to confirm.
Preselect progr
You can chose whether to preset the
Normal program or the last selected
program when the commercial
dishwasher is switched on.
The venting process begins. The
remaining time appears in the display.
The Pre-rinse program is offered
directly after the venting process is
finished. Start the program in order to
dilute and drain any detergent that
escaped into the wash cabinet.
^ Select the desired setting and press
the centre button to confirm.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Showroom program
Factory default
If you have changed any settings from
the factory default, you can reset them
back to the factory default settings. An
activated external dispensing module
and its respective amount of detergent
or dosage concentration will not be
reset.
Demo mode for showrooms only!
The commercial dishwasher is
equipped with various demo programs
for showroom use.
– Demo with sound:
This program activates the pumps to
demonstrate the sound of the
dishwasher washing (without water).
^ Select Reset to default and press
the centre button to confirm.
– Demo AutoOpen:
To close the Settings menu
The door will open automatically.
You can close the Settings menu with
Close.
To switch Demo mode on
^ Select Close and press the centre
button to confirm.
^ Select the desired option.
^ Select On and press the centre
button to confirm.
The last selected program is displayed
briefly and the respective indicator light
comes on.
^ Close the door.
After a short while, the estimated
program runtime is displayed.
The Demo begins.
To switch Demo mode off
Demo mode ends automatically after
one cycle.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise measurement
General requirements for measuring noise
The dishwasher must be loaded with 16 place settings and the Normal program
must be used.
Installation requirements for measuring noise
The dishwasher must be installed as follows:.
^ Install the dishwasher into an appropriate housing unit.
^ Secure the front panel.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise measurement
^ Push the insulation mat supplied (depending on model) under the plinth until it
is up against the appliance feet a.
^ Attach the toe-kick so that it is flush with the door front b.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Subject to change without notice / Publication date 2013-06-12
M.-Nr. 09 501 370 / 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|