Operating instructions
Platinum
G 892
G 892 SC
To prevent accidents
and machine damage,
read these instructions
before
UV
installation or use.
M.-Nr. 05 431 352
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Operation
Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Running the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Program sequence indicator (16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
At the end of a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Interrupting a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Changing a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Program guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Additional features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
"Top Solo" (18). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Extended drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Frequently asked questions
After sales service
Transport
User Maintenance Instructions
Cleaning and Care
Cleaning the filter in the wash cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cleaning the door and door seal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cleaning the exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
Do not use an extension cord to
connect this appliance to
When using your dishwasher, follow
basic precautions, including the
following:
electricity. Extension cords do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
Be certain your appliance is
properly installed and grounded by
a qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damages caused
by the lack, or inadequacy, of an
effective grounding system.
Read all instructions before
installation or use of the dishwasher
to prevent injury and machine
damage.
The manufacturer cannot be held
responsible for damage or injury
caused by improper use of this
appliance.
Use the dishwasher only for its
intended purpose. This appliance is
intended for residential use only.
Installation
Keep these operating instructions in
a safe place and pass them on to
any future user.
Installation and repair work should
be performed by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and could void the warranty.
, WARNING - Fire hazard
Do not cover or crush the plug of
an electric appliance. Ensure that the
cabinet opening for the dishwasher
provides ample space for the plug.
Installing the dishwasher in a tight
space may crimp the power cord or put
pressure on the plug which may cause
overheating.
Electrical safety
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Before installation or service,
disconnect the power supply to the
work area by unplugging the unit,
“tripping” the circuit breaker or
removing the fuse.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
This equipment is not designed for Use
maritime use or for use in mobile
Only use the dishwasher if all
installations such as recreational
panels are properly in place.
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the nearest Miele dealer
or the Miele Technical Service
Do not tamper
with the controls.
To reduce the risk of injury, do not
allow children to play in, on, or
near the dishwasher.
Department with specific requirements.
Inspect the dishwasher for
shipping damage. Do not install or
operate a damaged unit. Contact the
place of purchase.
Do not damage, sit, or stand on the
door or baskets of the dishwasher.
Under certain conditions, hydrogen
gas may be produced in a hot
Ensure that any plastic wrappings,
bags etc. are disposed of safely
and kept out of the reach of children.
Danger of suffocation!
water system that has not been used
for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot water
system has not been used for such a
period, turn on all hot water faucets and
let water flow from each for several
minutes before using the dishwasher.
This will release any accumulated
hydrogen gas. Do not smoke or use an
open flame during this time.
This dishwasher should only be
installed under a continuous
countertop secured to adjacent
cabinetry.
Do not install this dishwasher
beneath a cooking surface, oven or
any appliance that radiates heat.
High temperatures from these units may
damage the dishwasher.
Do not wash plastic items unless
they are labeled "dishwasher safe"
or the equivalent. For items not labeled,
check the manufacturer’s
Do not, under any circumstances
cut the intake hose or submerge in
liquid. This hose contains electrical
components that could cause injury or
property damage if cut or submerged.
recommendations.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When loading tableware, place
sharp items away from the door
seal to prevent damage to the seal.
Load knives pointing downwards to
prevent injuries.
Disposal of an appliance
If the appliance is removed from its
installation and will not be used,
the door to the wash cabinet should be
removed to prevent children from being
Only use detergents and rinse aids locked in the machine. When
recommended for residential
dishwashers. Keep all detergents and
rinse aids out of the reach of children.
discarding an old dishwasher, unplug it
from the power outlet, remove the door
to the wash cabinet and cut off the
power cord.
Do not drink water from the
dishwasher! Harmful residues
could be present.
SAVE THESE
For dishwashers with a visible
heating element
INSTRUCTIONS
Do not touch the heating element
during or immediately after use.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSIGNES DE SÉCURITÉ IMPORTANTES
AVERTISSEMENT –
Lorsque vous utilisez votre
lave-vaisselle, veuillez prendre des
précautions essentielles, y compris
ce qui suit.
Sécurité électrique
Avant l’installation, assurez-vous
que la tension et la fréquence
indiquées sur la plaque signalétique
correspondent bien à celles de
l’alimentation électrique de la résidence
afin de prévenir les blessures et d’éviter
d’endommager l’appareil. Dans le
doute, consultez un électricien qualifié.
Lisez attentivement l’ensemble des
consignes avant d’installer ou
d’utiliser le lave-vaisselle afin de
prévenir les blessures et éviter
d’endommager l’appareil.
Avant de procéder à l’installation
ou à des travaux d’entretien,
coupez l’alimentation électrique, soit en
débranchant l’appareil, soit en faisant
basculer le disjoncteur, soit en enlevant
le fusible.
Le fabricant ne peut être tenu
responsable des dommages ou
blessures causés par une utilisation
inappropriée de l’appareil.
N’utilisez pas de rallonge pour
brancher l’appareil à la source
d’alimentation électrique. Les rallonges
ne garantissent pas la sécurité requise
pour l’appareil - si vous utilisez une
rallonge, cela peut causer une
surchauffe.
Utilisez le lave-vaisselle uniquement
aux fins auxquelles il a été conçu.
Cet appareil est destiné à un usage
domestique uniquement.
Assurez-vous que votre appareil
est installé correctement et mis à la
terre par un technicien qualifié. Pour
garantir la sécurité électrique de
l’appareil, il faut le raccorder à une
installation de mise à la terre
Conservez ces instructions dans un
lieu sûr et transmettez-les à tout
utilisateur ultérieur.
appropriée. Il est essentiel de respecter
cette exigence de sécurité élémentaire.
Dans le doute, faites vérifier
l’installation électrique de la résidence
par un électricien qualifié. Le fabricant
ne peut être tenu responsable de
dommages causés par l’absence d’une
installation de mise à la terre ou une
installation déficiente.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Installation
Vérifiez si votre lave-vaisselle n’a
pas subi de dommage lors du
transport. N’installez pas et n’utilisez
pas un appareil endommagé.
Communiquez avec le point de vente
où vous l’avez acheté.
L’installation et les réparations
devraient être effectuées
uniquement par un technicien de
service autorisé Miele. Les travaux
effectués par des personnes non
qualifiées peuvent s’avérer dangereux
et annuler la garantie.
Assurez-vous de vous débarrasser
correctement des emballages,
sacs, matières plastiques et autres et
de les tenir hors la portée de bébés et
d’enfants. Risque de suffocation!
, ATTENTION - Risque d’incendie
Ne recouvrez et n’écrasez jamais
la fiche d’un appareil électrique.
Assurez-vous que dans l’espace
occupé par le lave-vaisselle, il y a
Le lave-vaisselle doit être installé
uniquement sous un comptoir
suffisamment d’espace pour la fiche. Si continu fixé à des armoires adjacentes.
vous installez le lave-vaisselle dans un
N’installez pas ce modèle de
espace trop petit, le cordon
lave-vaisselle sous une surface de
d’alimentation pourrrait être comprimé
cuisson, un four ou tout autre appareil
ou une pression pourrait être exercée
qui diffuse de la chaleur.
sur la fiche, ce qui risque de causer
Les hautes températures émanant de
une surchauffe.
ces appareils pourraient endommager
Cet appareil n’est pas conçu pour
être utilisé sur un bateau ou dans
des engins mobiles, comme des avions
ou des véhicules récréatifs. Toutefois,
son installation est possible dans
certaines circonstances. Veuillez
communiquer vos exigences
particulières au détaillant Miele le plus
près de chez vous ou au Service
technique.
le lave-vaisselle.
En aucun cas, vous ne devez
couper le tuyau d’arrivée d’eau ou
l’immerger, car il contient des
composants électriques qui pourraient
causer des blessures ou des
dommages matériels.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Utilisation
Au moment de charger la vaisselle,
ne disposez pas les articles
coupants à proximité du joint
d’étanchéité de la porte afin d’éviter de
l’endommager. Placez les couteaux
avec la pointe vers le bas afin d’éviter
les blessures.
N’utilisez le lave-vaisselle que
lorsque tous les panneaux sont
bien en place.
Ne jouez pas avec les
commandes.
Afin de diminuer le risque de
blessures, ne laissez pas les
enfants jouer près de l’appareil ni
monter dedans ou dessus.
Utilisez seulement les détergents
et les produits de rinçage
recommandés pour les lave-vaisselle à
usage domestique. Conservez tous ces
produits hors de la portée d’enfants.
Évitez de malmener la porte ou les
paniers du lave-vaisselle ou de
vous y appuyer ou asseoir.
Ne consommez pas l’eau du
lave-vaisselle! Elle peut contenir
des résidus dangereux.
Dans certaines circonstances, un
système d’eau chaude qui n’a pas
servi durant deux semaines ou
Lave-vaisselle munis d’un élément
chauffant visible
davantage peut produire de
l’hydrogène. L’HYDROGÈNE EST UN
GAZ EXPLOSIF. Si le système d’eau
chaude n’a pas servi durant une telle
période, ouvrez tous les robinets d’eau
chaude et laissez l’eau couler plusieurs
minutes avant d’utiliser le lave-vaisselle.
Cette action libérera l’hydrogène qui
aura pu s’y accumuler. Entre-temps,
abstenez-vous de fumer et n’utilisez
pas de flamme nue.
Ne touchez pas l’élément chauffant
pendant ou immédiatement après
l’utilisation.
Mise au rebut de l’appareil
Si vous désinstallez l’appareil et
comptez ne plus vous en servir,
détachez-en la porte pour éviter que
des enfants s’y retrouvent enfermés.
Lorsque vous mettez un lave-vaisselle
au rebut, débranchez-le de la source
d’alimentation électrique, détachez-en
la porte et coupez le cordon
Ne lavez pas des articles en
plastique qui ne portent pas la
mention "va au lave-vaisselle" ou une
formulation équivalente. Consultez les
recommandations du fabricant pour les
articles qui ne portent aucune mention
à cet égard.
d’alimentation.
CONSERVEZ
CES CONSIGNES
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
This dishwasher is exceptionally
economical in the use of water and
electricity. For best results follow these
tips:
^ For lowest energy consumption and
the gentlest washing of china and
crystal, connect the dishwasher to a
cold water source.
^ For fastest possible wash times, yet
higher energy consumption, connect
the dishwasher to a hot water source.
^ Make full use of the baskets without
overloading for the most economical
washing.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
^ For small loads:
Select the "Top Solo" feature (see
"Additional features").
^ If baskets are only half full, select the
"Economy" program.
^ Use the correct amounts of detergent
and rinse aid.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Wash cabinet
1
2
Upper spray arm (not visible)
7
8
9
Four height adjustable feet
Triple Filter System
Salt reservoir
Cutlery tray
(select models)
3
4
Upper basket
10 Detergent dispenser
Water feed for
the middle spray arm
11 Rinse aid reservoir
(with dosage selector)
5
6
Middle spray arm
Lower spray arm
12 Data plate
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Control panel
13 "On/Off" button
18 "Top Solo" button
19 Program selection buttons
20 Child Safety Lock
21 Door release
14 Program list/indicators
15 Check/Refill indicators
16 Program sequence display
17 "Start/Stop" button
22 Drying vent
Every dishwasher is tested before leaving the factory. Any water remaining in
the machine is from these tests and does not indicate that the machine has
been used.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
Child Safety Lock
The yellow key for the Child Safety
Lock is shipped on one of the spikes
at the front of the upper basket.
Remove the key before using the
dishwasher.
^ Press the release catch inside the
door grip.
If the door is opened during operation,
the dishwasher will stop running. Once
the door is closed the program will
restart.
The Child Safety Lock is designed to
prevent children from opening the
dishwasher.
To close the door
^ Push the baskets in.
^ Use the provided key to lock or
unlock the dishwasher.
^ Lift the door and push until it clicks
into position.
Horizontal:
the door is locked
Vertical:
the door can be opened
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Water softener
If your water hardness is consistently
lower than 8 gr/gal (140 p.m.), you do
not need to add dishwasher salt.
However, the dishwasher must still be
programmed to correspond to the local
water hardness.
To achieve good cleaning results, the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above
8 gr/gal (values are in US gallons)
(140 p.m.), the water should be
softened. This takes place
Where the water hardness fluctuates
e.g. between 9 - 17 gr/gal (160 - 310
p.m.), always program the machine to
the higher value, 17 gr/gal (310 p.m.) in
this example.
automatically in the unit’s integrated
water softener.
– Your local water authority will be able If there is a fault, it will help the service
to advise you of the water hardness
level in your area.
technician to know the hardness of your
local water supply.
– The dishwasher must be
^ Please note your water hardness:
programmed to correspond to the
water hardness in your area.
gr/gal
– The water softener must be filled with
dishwasher salt for reactivation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Programming the water softener
1 - 22 gr/gal:
Your water hardness level must be
programmed into the dishwasher using
the buttons on the control panel.
^ Use the program selection buttons
(19) to select the program which
corresponds to the water hardness in
your area.
^ Make sure the dishwasher is turned
off.
Table 1
^ Press and hold the "Start/Stop" button
(17) and at the same time turn on the
dishwasher with the "On/Off" button
(13). Release the "Start/Stop" button
within two seconds.
gr/gal*
1 - 4**
ppm
Program indicator
Pots & Pans
Sani Wash
20 - 70
5 -
7
90 - 130
140 - 180
200 - 230
250 - 290
310 - 400
8 - 10
11 - 13
14 - 16
17 - 22
Normal Plus
Normal
The "Rinse" (16) indicator and a
program indicator will light and the
"Salt" (15) indicator will flash.
Economy
Rinse & Hold
If this is not the case, the above steps
must be repeated.
* US gallons
** Factory preset
If your water hardness is greater
than 22 gr/gal (400 p.m.) proceed to
the next page.
To store the programmed water
hardness:
^ Press the "Start/Stop" (17) button
twice.
^ Turn off the dishwasher.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
23 - 70 gr/gal:
Checking the programmed water
hardness
^ Press the program selection button
% (19) until the "Rinse" (16) indicator ^ Make sure the dishwasher is turned
flashes.
off.
This is the second program level.
^ Press and hold the "Start/Stop" button
(17) and at the same time turn on the
dishwasher with the "On/Off" button
(13). Release the "Start/Stop" button
within two seconds.
^ Use the program selection buttons
(19) to select the program which
corresponds to the water hardness in
your area.
The programmed water hardness will
be indicated by:
Table 2
gr/gal
ppm
Program indicator
Pots & Pans
1 - 22 gr/gal
23 - 35 410 - 630
36 - 70 650 - 1260
Lit program indicator (see table1).
Lit "Rinse" (16) indicator.
Sani Wash
The selected program indicator (14)
and the "Rinse" (16) indicator will flash.
23 - 70 gr/gal
Lit program indicator (see table 2).
Flashing "Rinse" (16) indicator.
To store the programmed water
hardness:
^ Press the "Start/Stop" button (17)
twice.
^ Turn off the dishwasher.
^ Turn off the dishwasher.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Filling the salt reservoir
To fill the salt reservoir:
If your water hardness level is greater
than 8 gr/gal, the salt reservoir should
be filled before the first use and when
the "Salt" indicator lights.
^ Remove the lower basket.
^ Unscrew and remove the salt
reservoir cap located on the floor of
the wash cabinet.
Only use water softener salt specially
formulated for dishwashers. Other salts
may contain insoluble additives which
can impair the water softener.
^ Place the provided funnel over the
salt reservoir.
The salt reservoir must be filled with
2 quarts (2 l) of water before adding
salt for the first time. Water does
not have to be added with
The proper salt can be purchased from
your Miele dealer or Miele.
subsequent refills.
,Inadvertently filling the salt
reservoir with dishwashing
detergent will damage the water
softener.
^ Carefully fill with salt. The salt
reservoir holds approximately 4.5 lbs
(2 kg) of salt. As it is filled, water will
run out.
^ Clean any excess salt from the
threads of the reservoir opening.
^ Screw the cap on firmly.
^ If the dishwasher will not be used
immediately, run the "Rinse & Hold"
program. This will remove any traces
of salt from inside the wash cabinet.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Salt indicator
Bypassing the salt indicator
When the salt reservoir is empty, the
"Salt-PC" indicator will light, indicating
that it should be refilled with
reactivation salt.
If your water is soft (below 8 gr/gal) the
salt reservoir should not be filled with
salt. The indicator will remain lit and
should be disregarded or bypassed.
^ Remove the salt reservoir cap.
Looking into the salt reservoir, you will
see the top of the float chamber on the
right hand side, a.
After the reservoir has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is started. The "Salt"
indicator will be lit during this process.
^ Using a screwdriver, carefully pivot
the float chamber towards the center
of the reservoir.
^ Using needle nose pliers, pull the
cap, b, off of the float chamber, and
remove the float, c.
Replace the float chamber cap, push
the chamber back into its upright
position, and replace the salt reservoir
cap. The "Salt" indicator should no
longer be lit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Rinse aid is recommended to prevent
spotting on dishes and glassware.
,Filling the rinse aid reservoir with
detergent will damage the reservoir.
Only pour rinse aid formulated for
residential dishwashers into the
reservoir.
Adding rinse aid
^ Pour liquid rinse aid into the reservoir
until it is visible on the surface of the
screen.
^ Press on the flap until you hear it
click shut. Failure to close it all the
way will allow water to enter the
reservoir during the wash program.
^ Wipe up any spilled rinse aid. The
flap will remain closed during normal
operation.
^ Add rinse aid before the first use and
whenever the "Rise aid" indicator
lights.
^ Press the button in the direction of
the arrow until the flap springs open.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Adjusting the dosage
Rinse aid indicator
The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 1 to 6.
When the indicator first comes on, there
will be enough rinse aid left for 2 - 3
washes.
^ Use a higher setting if spots appear
on dry glassware.
^ Use a lower setting if streaking
appears on dishes or glasses.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed throughout the
inside of the dishwasher.
Wax, grease and paint will cause
permanent discoloration or damage
to the dishwasher.
^ Food residue and spilled liquids
should be cleaned from the sides of
the dishwasher door. These are
outside of the wash cabinet and are
not cleaned by water from the spray
arms.
^ Scrape food from dishes before
placing in the dishwasher.
Do not rinse dishes.
^ Load dishes so that water can reach
all surfaces. Do not place dishes and
cutlery inside other pieces.
^ Hollow items such as cups and
glasses should be placed upside
down in the upper basket.
^ Concave based items, such as mugs
or bowls, should be placed at an
angle so that water does not pool.
^ To ensure good water coverage tall,
narrow, hollow pieces, such as a
vase, should be placed in the center
of the basket, rather than in the
corners.
^ Small cups and glasses should be
placed on the cup racks. Taller mugs
and glasses can be placed beneath
the rack.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Items not recommended for
dishwashing
Glassware:
– There are no standard guidelines for
washing glassware but, when in
doubt wash by hand.
– Cutlery with wooden handles.
– Wooden cutting boards.
– Wash delicate glassware with a low
temperature program and without the
extended drying feature to reduce
the risk of clouding. See the
– Glued items such as old knives with
handles glued together around the
shank of the blade.
"Program guide".
– Hand made craft items, antique,
metal trimmed or decorative
glassware.
– If crystal or delicate glasses will be
washed frequently, connect the
dishwasher to cold, rather than hot
water.
– Lead crystal.
– Copper, brass, tin or pewter.
– Clouding or etching may occur on
glasses after frequent washing.
– Plastic items that are not heat
resistant.
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe.
– Dishes with color painted over the
glaze. These dishes may fade over
time.
Silver and aluminum:
– Cast iron pots and pans.
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise,
mustard, fish and marinades.
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery basket
^ For the best cleaning results, spoons
and forks should be placed in the
basket with handles down. Knives
and other pointed objects can be
loaded with their handles up to
prevent injuries.
^ Place small spoons into the slots on
either side of the cutlery basket.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery tray (SC units)
Spoon heads should be placed in
contact with at least one of the serrated
retainers of the cutlery tray to ensure
that water runs off freely.
The removable cutlery tray makes
unloading flatware easy. Simply carry
the cutlery tray to where the flatware is
stored and put the entire basket away
in one trip.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge and
forks with the prongs between the
holders. Spoons should be placed in
the opposite direction with the handles
between the holders.
Longer items such as soup ladles, cake
slices, mixing spoons and long knives
should be placed lengthwise in the
indentation of the cutlery tray.
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Upper basket
Adjusting the upper basket
On select models, the upper basket
can be raised or lowered to
accommodate tall items.
^ Slide out the upper basket.
Load the upper basket with small,
lightweight, or delicate items such as
cups, saucers, glasses, dessert bowls
and flat pans.
Long items such as soup ladles, mixing
spoons and knives can be set across
the front of the upper basket.
^ Pull up the levers at the sides of the
upper basket and adjust the basket
height.
^ Release the levers and the basket will
lock in place.
The basket can also be angled to fit tall
items in both, the lower and upper
baskets. The angles should not be set
to opposite extremes. This will block the
middle spray arm. Take care when
sliding the basket in and out in this
position.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjustable cup racks
Coffee bar
Raise the rack to make room for tall
glasses. Lower it to double stack
smaller pieces.
To allow water to run off the bottom of
coffee mugs, place slanted on top of
the coffee bar. The bar can also be
used to separate two rows of glasses.
To stack wide items, flip the bar to the
right.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Lower basket
Dishwasher with cutlery tray
For larger and heavier items such as
plates, serving platters, sauce pans,
bowls.
Dishwasher with cutlery basket
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Height limit
Vase / Bottle holder (select models)
The bottle holder e.g. for milk or baby
bottles, can be inserted into the bottom
basket in more than one place. Position
in any area marked white in the
illustration. Do not place the insert in
the corners of the lower basket, water
cannot properly cover bottles in these
areas.
The guide at the front of the upper
basket determines the maximum height
for items placed in the lower basket so
that the middle spray arm is not
blocked.
Foldable spikes
Two rows of spikes can be folded
down, to create more room for larger
dishware e.g. pots, pans and bowls.
^ Lift up the spike rows and fold them
one on top of the other.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Basket accessories
Additional inserts for the upper and lower baskets may be purchased from your
Miele dealer or the Miele Technical Service Department.
Vase / Bottle holder
To wash milk or baby bottles
attaches to the lower basket
Mini Cutlery Basket
To wash additional cutlery
for units with cutlery tray
attaches to the lower basket
Upper Basket Glassware Insert
To wash long stemmed glassware
attaches to the upper basket
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Adding detergent
,Dishwasher detergents contain
irritant and corrosive ingredients.
Keep children away from detergent.
Do not fill the detergent dispenser
until you are ready to start the
dishwasher.
Only use powder detergents or
tablets formulated for residential
dishwashers. The use of gel or liquid
detergent is not recommended.
Never fill the detergent dispenser to
capacity.
Do not use more than the
recommended amount of detergent.
Continued use of too much
detergent may cause machine
damage.
The horizontal marks in Compartment II
indicate levels of approximately 1 1/4,
1 3/4 and 2 tablespoons (20, 25 and
30 ml) respectively.
^ With the dishwasher door fully open
fill compartment II with 2 tablespoons
(30 ml) of powder detergent or one
detergent tablet.
^ Close the cover. The cover will
always open at the end of a wash
program except in "Rinse & Hold".
2 tablespoons (30 ml) of detergent is
enough for most normally soiled loads.
For heavily soiled loads, or if food has
dried on the dishes, a program
containing a pre-wash cycle should be
selected. Add an extra tablespoon (15
ml) of detergent to compartment I.
Less detergent is needed in homes with
very soft water and when washing
lightly soiled dishes.
^ To open, press the latch on the
detergent dispenser.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Running the dishwasher
Waterproof System
^ Make sure the spray arms are not
blocked.
All Miele dishwashers are specially
designed to shut off the water intake
and drain the wash cabinet in the rare
event of an internal water valve failure.
^ Close the door.
^ Turn on the dishwasher.
For this feature to be active, the
The "Start/Stop" indicator (17) will flash
and a program indicator (14) will light.
machine must be "On" (not necessarily
running) and the door must be closed.
^ Select a wash program using the
program selection buttons (19). The
selected program indicator will light.
Program sequence indicator
(16)
The current step of a wash program is
indicated by the program sequence
indicator (16).
^ Refer to the "Program guide" for
details on wash programs.
^ Select "Top Solo" if desired. See
"Additional features".
^ Press the "Start/Stop" button (17).
The wash program will begin.
Do not end a program prematurely!
Important program steps could be
omitted (e.g. reactivating the water
softener).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
At the end of a program
Interrupting a program
The "End" indicator will light when the
program has finished.
A program is interrupted as soon as the
door is opened.
If the door is closed, the program will
continue from where it was interrupted.
^ Turn off the dishwasher.
^ Open the dishwasher door slightly to
allow the dishes to cool before
unloading.
,Water in the dishwasher may be
hot. There is a danger of being
burned! Only open the door if
absolutely necessary.
It is advisable to turn off the water
supply if the dishwasher will not be
used for a period of time (e.g. while
vacationing).
Changing a program
If a program is running:
^ Press the "Start/Stop" button (17) for
at least one second.
^ Select the new program using the
program selection buttons (19).
^ Select "Top Solo" if needed (see
"Additional features").
^ Press the "Start/Stop" (17) button.
The new program will begin.
If a program has not started:
^ Use the program selection buttons
(19) to choose a new wash program.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Program guide
Program
When to use
Program cycle
Pre- Main Interim Final Dry-
wash wash rinse rinse ing
1 2
1 2
Pots & Pans for heavily soiled pots and pans with dried on food
Main wash temperature 170 °F (75 °C)
Run-time 128 min
X X
X
X
X
-
X
X
X
X
Sani Wash
extended wash time
-
X
X X
for sanitizing normally soiled dishware with dried
on food
Main wash temperature 150 °F (65 °C)
Run-time 142 min
Normal Plus higher wash temperature helps to clean
normally soiled dishware with stubborn dried on
food or greasy residues
X X
X X
X
X
-
X
X
Main wash temperature 150 °F (65 °C)
Run-time 135 min
1)
Normal
for normal soiled dishware
Main wash temperature 130 °F (55 °C)
Run-time 118 min
X
X
X
X
-
-
X
X
X
X
Economy
energy saving program
-
-
for normally soiled dishware
Main wash temperature 130 °F (55 °C)
Run-time 85 min
Rinse & Hold for rinsing dishes when a complete cycle is not needed -
X
-
-
-
-
-
Run-time 11 min
1) Standard for Energy Label
When washing a full load in Pots & Pans, Sani Wash and the Normal programs use at least 2
tablespoons (30 ml) of detergent.
For the Pots & Pans program add an additional teaspoon (5 ml) to compartment I.
1
If "Top Solo" is selected, reduce the amount of detergent to 1 / tablespoons (20 ml).
4
Program times are based on a hot water connection. If the unit is connected to cold water, program
times will increase by approximately 25 minutes.
Usage:
Electric 0.06 - 2.4 (kWh)
Water
1.3 - 6.3 US gallons (5 - 24 L)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Additional features
"Top Solo" (18)
^ Turn the dishwasher on using the
"On/Off" button (13).
Using "Top Solo" will save water and
energy.
The "Start/Stop" (17) indicator will flash.
This program is recommended when
there is only a small load to clean. "Top
Solo" can be selected with all
programs.
^ Select a program using the program
selection buttons (19).
^ Press the "Top Solo" button (18).
The "Top Solo" indicator and the
selected program indicator will light.
With this feature, water is directed only
to the top and middle spray arms in the
dishwasher. This means that the water
jets are only aimed at items in the
upper basket and the cutlery tray.
^ Press the "Start/Stop" button (17).
The program will begin.
The middle spray arm also directs
water downwards, so lightly soiled
plates or platters can be placed in the
lower basket.
When using this program, do not place
pots, bowls or other hollow containers
in the lower basket.
Because a smaller load is being
washed the amount of detergent
recommended can be reduced to 1 1/4
tablespoons.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Extended drying
The extended drying time is off if the
top program indicator flashes.
If desired drying results are not
consistently achieved, the turbothermic The extended drying time is on if the
cooling fan can be programmed to run
an extra 14 minutes at the end of each
program.
top program indicator lights.
If the correct drying time is set:
The "Extended drying" feature can also
be activated to prevent condensation
from collecting on the steam deflector.
^ Turn off the dishwasher.
If the drying time is incorrect:
Turning extended drying on/off
^ Press the "Top Solo" button (18).
^ Make sure the dishwasher is turned
off.
^ Press the "Start/Stop" (17) button
twice.
^ Press and hold the "Start/Stop" (17)
button and at the same time turn the
dishwasher on using the "On/Off"
button.
Release the "Start/Stop" button within
two seconds.
The "Start/Stop" (17) indicator will flash.
The changed extended drying option
will be stored.
^ Turn off the dishwasher.
^ Press the "Top Solo" (18) button.
The "Salt" (15) indicator will flash and
the "End" (16) indicator will light.
If this is not the case, the above steps
must be repeated.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service
call.
,Repairs should only be carried out by a qualified and trained technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
What if …
Possible fault
Fix
the dishwasher does not The door is not properly
Close the door firmly.
start?
closed.
The machine is not
plugged in.
Insert the plug.
The fuse is defective or
the breaker has tripped.
Reset the circuit breaker
Make sure it is a 15 A
breaker.
the dishwasher stops
during a program?
The fuse or breaker has
tripped.
Reset the circuit breaker
Make sure it is a 15 A
breaker.
the "Intake/Drain"
indicator is lit/flashing?
The water valve is closed. Open the water valve.
The filter in the water inlet See maintenance
is blocked.
instructions.
The waterproof system
has activated.
Call the Miele Technical
Service Department.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
Contact a plumber.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if …
Possible fault
Fix
the "Intake/Drain"
The triple filter in the wash Clean the filter, see
indicator flashes and the cabinet is clogged.
maintenance instructions.
program stops?
The drain pump or the
Clean the drain pump and
non-return valve may be the non-return valve, see
blocked. maintenance instructions.
The drain hose is kinked. Remove the kink.
the "End", "Start/Stop" There may be a technical – Press the "Start/Stop"
and "Top Solo"
fault.
button.
indicators flash at the
same time at the end of
a program?
– Turn off the dishwasher.
A few seconds later:
– Turn the dishwasher on.
– Select the desired
program.
– Press the "Start/Stop"
button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if …
Possible fault
Fix
there is a knocking
noise in the wash
cabinet?
The spray arm is hitting
an item in the basket.
Interrupt the program,
rearrange items blocking
the spray arms.
there is a rattling noise? Items are not secure in
Interrupt the program and
rearrange loose pieces.
the wash cabinet.
there is a knocking
noise in the water
pipes?
This may be caused by
the installation or the
diameter of pipe.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
the dishes are not dry,
The rinse aid setting may Increase the dosage or
glasses and cutlery are be too low, or the rinse aid refill the reservoir, see
spotted?
reservoir is empty.
"Before using for the first
time".
Extended drying is not
activated.
Activate the Extended
drying feature.
Dishes were taken out too Leave dishes in longer.
soon.
dishes are not clean?
The dishes were not
loaded correctly.
See "Loading the
dishwasher".
The program was not
powerful enough.
Select a more intensive
program, see "Program
guide".
Not enough detergent
was dispensed.
Use more detergent, see
"Adding detergent".
The spray arm jets are
clogged.
Clean the spray arm jets,
see the "User
Maintenance Instructions".
The triple filter is clogged Clean and reseat the filter,
or not correctly seated.
see the "User
Maintenance Instructions".
The non-return valve is
blocked while open.
Clean the drain pump and
the non-return valve, see
Water runs back into the the "User Maintenance
wash cabinet. Instructions".
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if …
Possible fault
Fix
tea or lipstick stains
have not been
completely removed?
The wash temperature of Select a program with a
the selected program was higher temperature.
too low.
Not enough detergent
was used.
Use more detergent.
white residue is visible Not enough rinse aid was Increase the dosage,
on cutlery and dishes,
clouding occurs on
glassware and film can
be wiped off?
used.
see "Before using for the
first time".
The salt reservoir is
empty.
Add reactivation salt,
see "Before using for the
first time".
The salt reservoir cap was Reseat it making sure it
not correctly screwed on. screws back on correctly.
The programmed setting Raise setting of the water
of the water softener is too softener , see "Before
low.
using for the first time".
there is a bluish sheen
on the surface of
glasses and film can be
wiped off?
The rinse aid dosage is
set too high.
Reduce the dosage, see
"Before using for the first
time".
glasses are dull and
discolored and film
cannot be wiped off?
Glasses are not
dishwasher safe.
There is no remedy.
Only wash dishwasher
safe glasses.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if …
Possible fault
Fix
plastic items are
discolored?
Natural dyes e.g. from
vegetables may be the
cause. Not enough
Use more detergent, see
"Adding detergent".
Discoloration is
detergent was used to
break down natural dyes.
permanent.
there are rust stains on The salt reservoir cap was Reseat and screw the cap
cutlery?
not screwed on properly. on firmly.
The affected items are not There is no remedy.
corrosion resistant.
Only wash dishwasher
safe cutlery.
detergent is left in the
The dispenser was damp Dry the dispenser before
dispenser at the end of a when detergent was
program? added.
the detergent dispenser Detergent residue is
adding detergent.
Remove the residue.
lid cannot be closed
properly?
blocking the catch.
water remains in the
The triple filter in the wash Clean the filter,
wash cabinet at the end cabinet is clogged.
see the "User
of a program?
Maintenance Instructions".
The drain pump or the
Clean the drain pump and
non-return valve may be the non-return valve,
blocked.
see the "User
Maintenance Instructions".
The drain hose is kinked. Remove the kink.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of a fault which you cannot MieleCare
correct yourself please contact the
Miele Technical Service Department.
MieleCare, our Extended Service
Contract program; gives you the
assurance of knowing that your
U 1-800-999-1360
appliance investment is covered by 5
years of worry free ownership.
V 1-800-565-6435
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
When contacting the Miele Technical
Service Department, please quote the
model and serial number of your
appliance.
These can be found on the data plate
on the upper inside edge of the
dishwasher door.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
Program update function - PC
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
For example, if a detergent with good
wash results using only cold water
becomes available, the wash programs
can be modified to take advantage of
this.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Transport
To transport the dishwasher, e.g. when
moving to a new home, note the
following:
– Empty the dishwasher.
– Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
– Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
User Maintenance Instructions
To prevent accidents
and machine damage,
read these instructions
before installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones).
The filter system should be cleaned
every 4 - 6 months or whenever a
foreign object is trapped.
Cleaning the filter in the wash
cabinet
^ Lift the filter out of the machine.
Remove any solid particles and rinse
under running water. Scrub with a
nylon brush if necessary.
^ Turn off the dishwasher before
cleaning.
^ Turn the handle counterclockwise to
release the triple filter system.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
To clean the underside of the filter, the
flap must be opened:
^ Return the filter so it lies flat in the
base of the wash cabinet.
^ Pull back the yellow clip.
^ Lock the filter by turning the handle
clockwise.
^ Rinse all parts under running water.
Scrub with a nylon brush if
necessary.
,The dishwasher must not be
used without the filter locked in
place.
^ Close the flap so that the clip
engages.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the spray arms
^ Remove the lower basket.
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before
cleaning.
Remove the spray arms as follows:
^ Remove the cutlery tray (if present).
^ Press the top spray arm upwards to
engage the inner ratchet and
unscrew the spray arm.
^ Pull the lower spray arm firmly
upwards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a
toothpick to push food particles into
the spray arm jets.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check
that they rotate freely.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the wash cabinet
Cleaning the exterior
Generally, the wash cabinet is self
cleaning if the correct amount of
dishwasher detergent is used.
,Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the dishwasher.
They will damage the surface.
The wash cabinet can be cleaned with
a dishwasher cleaner such as Dis
Cleaner available from your Miele
dealer or the Miele Technical Service
Department.
Plastic
All plastic surfaces and the control
panel can be cleaned with warm water
and liquid dish soap applied with a soft
sponge.
Cleaning the door and door
seal
Wipe dry using a soft cloth.
^ Wipe the door seal with a damp cloth
to remove any food particles.
,Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
^ Food residue and spilled liquids
should be wiped from the sides of the
dishwasher door. These are outside
of the wash cabinet and are not
cleaned by water from the spray
arms.
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored controls
These controls may become discolored
or damaged if not cleaned regularly.
Do not use a stainless steel cleaner on
the knobs or buttons.
Wood
Panels made from wood should be
cleaned using a soft damp cloth and an
appropriate wood cleaner.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the water inlet filter
,The plastic valve housing on the
intake hose contains electrical
components and should not be
submerged, or run through water.
A filter is incorporated in the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard, or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
Cleaning the filter:
^ Disconnect the dishwasher from
electricity (unplug it or "trip" the
circuit breaker).
Installing an in-line water filter
^ If your water contains a large number
of insoluble substances, a filter
between the water valve and the
intake hose connection is
^ Turn off the water valve.
^ Unscrew the intake hose.
recommended. These filters can be
purchased from Miele.
^ Carefully remove the rubber seal.
^ Remove the filter using needle nose
pliers and rinse under running water.
^ Return the filter and seal. Make sure
they are seated correctly.
^ Screw the intake hose back on the
water valve, checking that it is not
cross-threaded.
^ Slowly turn on the valve and test for
leaks.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher.
^ Remove the triple filter (see "Cleaning
the filter in the wash cabinet").
^ Use a jug or bowl to scoop water out
of the wash cabinet.
^ Pull out the non-return valve and
rinse well under running water.
^ Tilt the locking clamp to the side.
The drain pump is beneath the
non-return valve (see arrow).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully refit the non-return valve
and secure it with the locking clamp.
^ Refit and lock the filter in place.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Alterations rights reserved / 3105
M.-Nr. 05 431 352 / 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|