Operating Instructions
Dishwasher
G 5970
G 5975
en - US, CA
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 07 909 281
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
BrilliantLight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Settings ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Drying Plus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Optimize standby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Refill display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Check filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Reorganize programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Save options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
RemoteVision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Problems water intake/drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Help to protect the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Noise measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
General requirements for measuring noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Installation requirements for measuring noise. . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
Electrical Safety
Before installation, make sure that
~
the voltage and frequency listed on the
data plate correspond with the
When using your dishwasher, follow
basic precautions, including the
following:
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Read all instructions before
installation or use of the dishwasher
to prevent injury and machine
damage.
Before installation or service,
~
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
Use the dishwasher only for its
intended purpose. This appliance is
intended for residential use only.
Do not use an extension cord to
~
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Keep these operating instructions in
a safe place and pass them on to
any future user.
Be certain your appliance is
~
Correct usage
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
The dishwasher is not designed for
~
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as, shops, offices and showrooms
or guest houses.
The dishwasher is not intended for
~
outdoor use.
It must only be used as a domestic
~
appliance as specified in these
If the supplied power cord is
~
damaged it must only be replaced by a
Miele Service technician with a genuine
Miele power cord.
operating instructions, for cleaning
domestic crockery and cutlery. Any
other usage is not supported by the
manufacturer and could be dangerous.
The outlet must be accessible at all
~
times after installation to disconnect the
Persons who lack physical, sensory
~
dishwasher.
or mental abilities, or experience with
the appliance should not use the
dishwasher without supervision or
instruction by a responsible person.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Installation
Do not install this dishwasher
~
beneath a cooking surface, oven or any
The dishwasher must be installed
~
and connected in accordance with the
installation instructions.
appliance that radiates heat.
High temperatures from these units
may damage the dishwasher.
Installation and repair work should
~
A toe-kick must be used with the
~
be performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.
dishwasher. If the supplied toe-kick is
not used, a cabinet matching toe-kick
must be installed.
Do not install the dishwasher in an
~
area where it will be exposed to
temperatures below freezing.
Do not install or use a damaged
~
dishwasher. A damaged appliance is
dangerous. Unplug the machine and
contact the Miele Technical Service
Department.
Do not cut the intake hose or
~
submerge it in liquid. This hose
contains electrical components that
could cause injury or property damage
if cut or submerged.
Ensure that any plastic wrappings,
~
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Only power up the dishwasher
~
when all installation and plumbing work
This appliance must not be used in
~
a non-stationary location (e.g. on a
is complete.
boat).
Do not place hose or power cord
~
next to a heat source e.g. hot water
pipes.
, WARNING - Fire hazard!
~
Do not cover or crush the plug of the
appliance. Ensure that the cabinet
opening for the dishwasher provides
ample space for the plug and cord.
Installing the dishwasher in a tight
space may crimp the power cord or put
pressure on the plug which could
cause overheating.
Do not expose hose or power cord to
corrosive substances.
Damage of hose or power cord could
cause electrical shock or water
damage!
This dishwasher should only be
~
installed under a continuous counter
top secured to adjacent cabinetry.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Use
When loading tableware, place
~
sharp items away from the door to
prevent damage to the seal. Load
sharp items pointing downwards to
prevent injuries.
To reduce the risk of injury, do not
~
allow children to play in, on or near the
dishwasher. It is possible for small
fingers may be pinched in the door.
Only use detergents and rinse aids
~
recommended for residential
Only use the dishwasher if all panels
~
are properly in place.
dishwashers. Keep all detergents and
rinse aids out of the reach of children.
Do not tamper with the controls.
~
Do not sit or stand on the door or
~
baskets of the dishwasher. Close the
Do not inhale or swallow detergents.
~
Dishwasher detergents contain irritant
and corrosive ingredients. They can
cause burning in the mouth and throat if
swallowed, or inhibit breathing. Consult
a doctor immediately if detergent has
been swallowed or inhaled.
door when not in use.
Under certain conditions, hydrogen
~
gas may be produced in a hot water
system that has not been used for two
weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has
not been used for such a period, turn
on all hot water faucets and let water
flow from each for several minutes
before using the dishwasher. This will
release any accumulated hydrogen
gas. Do not smoke or use an open
flame during this time.
Do not drink water from the
~
dishwasher! Harmful residues could be
present.
Do not fill the rinse aid reservoir or
~
salt container with detergent. It will
destroy the rinse aid compartment and
water softener.
If the supplied power cord is
~
Be sure that all items placed in the
~
dishwasher are "dishwasher safe". For
items not labeled, check the
damaged it must only be replaced by a
Miele Service technician with a genuine
Miele power cord.
manufacturer’s recommendations.
The outlet must be accessible at all
times after installation to disconnect the
dishwasher.
This model offers a Drying Plus
~
feature, i.e. the door will automatically
open, without an audible signal first
being given, at the end of the program
releasing warm air from the dishwasher.
Use caution, the air may be hot!
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
This model offers a Drying Plus
~
feature, i.e. the door will automatically
shut once close enough to engage the
catch.
Advise the user of the Drying Plus
~
feature to avoid injuries by walking,
bumping or knocking into the partially
opened door.
Supervise children near the
~
dishwasher to ensure fingers or other
parts of the body are not caught when
the Drying Plus feature is in operation.
Dishes can be very hot at the end of
~
a program. Allow the dishes to cool
until they are cool enough to handle
before unloading them.
The water supply must be turned off
~
when the appliance is not used for a
longer period of time (e.g. during
vacations).
Disposal of an appliance
If the appliance is removed from its
~
installation site and will not be used,
remove the doorlock to the wash
cabinet to prevent children from locking
themselves in the machine.
SAVE THESE
INSTRUCTIONS
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
a Upper spray arm (not visible)
b Cutlery tray
g Triple filter system
h Data plate
c Upper basket
i Optical interface
j Rinse aid reservoir
d Middle spray arm
e Air inlet for drying
(depending on model)
k Dual compartment detergent
dispenser
f Lower spray arm
l Salt container
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Control panel
aSelection buttons
eK button (Information)
To display more info about the
displayed menu
To select a menu point from this
display, to change the displayed
value (+/-) or to browse between
menus.
f K On/Off button with indicator
To turn the dishwasher on or off.
bDisplay
See the following pages for more
information.
gTechnical Service interface
Allows a service technician to check
and update the machine when
applicable.
cU (Clear) button
To switch back to the previous menu
level or to discard a selected setting.
hOptical interface
To show the current wash cycle
status when the door is closed
dd Delay Start button with indicator
iRemoteVision
Indicator for RemoteVision enabled
appliances.
This operating instruction manual describes several dishwasher models with
different indicated settings.
The different dishwasher models are named :
Standard = 32 1/16" (81.5 cm) high dishwashers
XXL
= 33 11/16" (85.5 cm) high dishwashers.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
This dishwasher is exceptionally
economical in the use of water and
electricity. For best results follow these
tips:
^ For lowest energy consumption you
may connect the dishwasher to a
cold water source.
^ For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source.
^ Make full use of the baskets without
overloading for the most economical
washing.
^ Use the correct amount of detergent
and rinse aid. Detergent dosage is
dependent upon the amount of
soiling and type of dishware being
washed. See the "Program Guide" for
more information.
^ When using powder or gel detergent,
reduce the amount to 2/3 of the
normal amount when washing a small
load.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
To close the door
^ Push the baskets in.
^ Lift the door and push until the catch
engages.
The door will then close automatically.
,Keep fingers and other body
parts away from the door as it is
closing. Danger of injury.
The door will open automatically at the
end of the program to aid in the drying
process.
This function can be deactivated (see
"Settings - Drying Plus").
^ Pull the handle to open the door.
If the door is opened during operation,
the rinsing function is automatically
canceled.
,Keep the opening area free of
obstructions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Display function
The following can be selected in the
display:
!
A bullet in the display next to the button
shows that this function can be
selected.
– the wash program
– the options
– the start time
– the settings menu !
– information
n
The arrows in the display indicate that
more selections or text follow and can
be displayed with the respective
control.
During a running program the display
shows:
– the program name
– the current time of day
– the program sequence
– the approximate remaining time
– faults and messages
- - - - - -
A dotted line is shown to indicate the
last selection available.
OK
To save energy the dishwasher turns
off after a few minutes if no button is
pressed. To turn the dishwasher
back on press K.
To confirm these messages or settings
select OK, and the next menu or
another menu level will appear.
(
The currently selected option is marked
with a check.
The "Settings !" menu allows you to
customize the dishwasher settings.
See "Settings" for more information.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Welcome screen
^ Turn the dishwasher on K.
A Welcome screen shows when the washer is turned on for
the first time.
Language setting
The display changes automatically to the language setting.
} #eština
} dansk
e
Sprache F
^ Select the desired language and confirm with OK.
The selected language is marked with a L check.
Clock format
The display changes automatically to the clock format.
} 12 h clock
Clock Format
} 24 h clock B
OK }
^ Select the desired setting and confirm with OK.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Time of day
The display changes automatically to the time of day setting.
} +
12 : 00
} -
Please set the time of day
OK }
^ Set the hours using the +/- controls and confirm with OK.
Set the minutes and press OK.
Water hardness
The display then changes to the water hardness setting.
} 15°d B
e
Water hardness
} 16°d
OK }
To achieve good cleaning results, the dishwasher needs soft
water. Hard water results in calcium deposits on dishware
and in the dishwasher.
If your tap water hardness is above 4 °d (4 gr/gal [US]), the
water should be softened.
– Your local water authority will be able to advise you of the
water hardness level in your area.
– The dishwasher must be programmed to correspond to the
water hardness in your area.
– In areas where the water hardness fluctuates (e. g.
37 - 50 °d [39 -52 gr/gal]) always program the machine to
the higher value (in this example 50 °d [52 gr/gal]).
If there is a fault, it will help the service technician to know the
hardness of your local water supply.
Please note your water hardness below:
°d (gr/gal)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
The water hardness was programmed
at 1 °d (1 gr/gal) by factory default.
Two notes appear in the display.
After confirming these notes, : Add
rinse aid and/or : Add salt may
appear in the display.
^ Select the hardness of your water
supply and confirm with the center
button.
Confirm these notes with OK. The
display changes to the main menu.
See "Settings - Water hardness" for
more information.
These basic settings are saved after
the first full program cycle is
completed.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
^ Remove the lower basket from the
wash cabinet and unscrew the salt
container lid.
Every dishwasher is tested before
leaving the factory. Any water
remaining in the machine is from the
final factory test and does not
indicate that the machine has been
used.
When opening the salt container,
water will run out. Open the
container only to refill salt.
Filling the salt container
Important: The salt container must
be filled with 2 quarts (2 l) of water
before adding salt for the first time
so the salt can dissolve
To achieve good cleaning results, the
dishwasher needs soft water (water that
is low in minerals). Hard water results in
calcium deposits on dishware and in
the dishwasher.
properly. Water does not have to be
added with subsequent refills.
Therefore, if your tap water hardness is
above 4 °d (4 gr/gal) the water should
be softened. The built-in water softener
is designed for this purpose. The water
softener is suitable for a water hardness
up to 70 °d (73 gr/gal).
,Inadvertently filling the salt
container with dishwashing
detergent (including liquid
detergent) will damage the water
softener.
,Only use water softener salt
specially formulated for
dishwashers. Other salts may
contain insoluble additives which
can impair the water softener.
If using "Tab" products which
include salt, still add salt to the
machine to achieve optimal cleaning
results and ensure long-term
functioning of the water softener.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Salt refill message
^ When the display shows Insufficient
salt, refill the salt after the program
has finished.
^ Confirm with OK.
The message will clear from the display.
If a sufficiently high concentration of
salt has not yet formed, the Insufficient
salt message may continue to be
displayed after adding the salt. In this
case, confirm again with the center
button.
^ Place the provided funnel over the
salt container and carefully fill it with
salt. The salt container holds
The Insufficient salt message is turned
off if you have programmed the
dishwasher to a water hardness below
4 °d (4 gr/gal).
approx. 4.4 lbs (2 kg) of salt,
depending on the type of salt.
^ Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
,Immediately after each refill, run
the "Rinse & Hold" program (without
the Turbo function) without a load.
This will remove any traces of salt
from inside the wash cabinet.
^ Immediately after each refill, run the
"Rinse & Hold" program (without the
Turbo function) without a load. This
will remove any traces of salt from
inside the wash cabinet.
If using"Tab" detergent products in
your dishwasher, the messages can
be turned off if desired (see "Settings
- Deactivate indicators").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to turn the indicators back on.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Rinse aid helps to prevent spotting on
dishes and glassware.
The rinse aid is filled in the reservoir
and the set amount will be
automatically dosed.
,Filling the rinse aid reservoir with
detergent (liquid or powder) will
damage the reservoir. Only pour
rinse aid formulated for residential
dishwashers into the reservoir.
^ Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
When using "Tab" detergents rinse
aid is not needed.
reservoir during the wash program.
Adding rinse aid
^ Clean any spilled rinse aid. This
prevents over-foaming occurring
during the next program.
You can adjust the rinse aid dosage
for best results (see "Settings - Rinse
aid").
^ Press the button on the rinse aid
reservoir in the direction of the arrow
until the flap springs open.
^ Pour liquid rinse aid into the reservoir
until it is visible on the surface of the
screen.
The rinse aid reservoir holds
approximately 3.7 fl. oz. (110 ml).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid indicator
When the ( Refill rinse aid message
appears, the reservoir contains
sufficient rinse aid for 2 - 3 programs
only.
^ Add rinse aid once the program has
finished.
^ Confirm with the OK button.
The "Refill rinse aid" message will go
out.
If using "Tab" detergent products in
your dishwasher, the messages can
be turned off if desired (see
"Settings - Deactivate indicators").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to turn the indicators back on.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed throughout the
inside of the dishwasher.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
Wax, grease and paint will cause
permanent discoloration and
damage to the dishwasher.
^ Food residue and spilled liquids
should be cleaned from the sides of
the dishwasher door. These are
outside of the wash cabinet and are
not cleaned by water from the spray
arms.
^ Scrape food from dishes before
placing them in the dishwasher,
rinsing is not necessary.
^ Some foods contain natural dyes,
e.g. carrots or tomatoes. Plastic items
may discolor permanently if they
come in contact with food dyes.
^ All items can be placed anywhere in
the baskets.
^ Load dishes so that water can reach
all surfaces. Do not place dishes or
cutlery inside other pieces.
^ Make sure that all items are securely
positioned.
^ Hollow items such as cups and
glasses should be placed upside
down in the baskets.
^ To ensure good water coverage, tall,
narrow and hollow items, i.e. vases
or champagne glasses, should be
placed in the center of the basket
rather than in the corners.
^ Concave based items such as mugs
or bowls, should be placed at an
angle so that water does not pool.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Items not recommended for
dishwashing
Glassware:
– There are no standard guidelines for
washing glassware, when in doubt
wash by hand.
– Cutlery with wooden handles
– Wooden cutting boards
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe. Only wash
items marked "dishwasher safe" in
the dishwasher.
– Glued items such as old knives with
handles glued together around the
shank of the blade
– Handmade craft items, antique,
metal trimmed or decorative
glassware
– If fine glassware is washed in the
dishwasher select the "China &
Crystal" program*. This will reduce
the risk of clouding.
– Plastic items that are not heat
resistant
– Copper, brass, tin or aluminum
Silver and aluminum:
– Dishes with color painted over the
glaze. These dishes may fade over
time
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– Fine glassware and crystal items
should only be washed using the
"China & Crystal" program*.
Otherwise clouding or etching may
occur after frequent washing.
– Cast iron pots and pans
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise,
mustard, fish and marinades.
* depending on model
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
If unsure whether your china and
crystal are dishwasher safe, please
check with the manufacturer. The
China & Crystal program*, although
extremely gentle and thorough can
cause the china and crystal to "wear"
if they are not dishwasher safe.
– Clean aluminum items, e.g. grease
filters, with domestic dishwasher
detergent only.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Typical load for 10 place settings with cutlery tray
Upper basket
Lower basket
Cutlery tray
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Typical load for 16 place settings with cutlery tray
Upper basket
Lower basket
Cutlery tray
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Upper basket
Foldable spikes
The rows of spikes can be lowered to
make more room for larger items, such
as casserole dishes.
,Always use the dishwasher with
the upper and lower basket inserted
(except during the Tall items
program, if available).
^ Press the yellow lever down a and
fold down the spikes b.
^ Load the upper basket with small,
lightweight, or delicate items such as
cups, saucers, glasses, dessert
bowls, etc.
Hinged cup rack
^ To make room for tall items, raise the
rack upwards.
Shallow pans can also be placed in
the upper basket.
Glasses can be arranged along the cup
rack to give them some support during
the program.
^ Long items such as soup ladles,
mixing spoons and long knives
should be placed lying down across
the front of the upper basket.
^ Lower the cup rack and lean the
glasses against it.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Jumbo cup rack
(depending on model):
Universal support bar
The support bar will hold tall glasses
The cup rack can be set at two different and stem ware securely.
widths so that it can also accommodate
large cups.
^ Fold the bar down and lean the
desired glasses against it.
^ Pull the cup rack upwards and click it
back into position at the required
width.
^ If desired, a section of the cutlery tray
can be removed to allow for even
taller glasses.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjusting the height:
You can set the support bar at two
different heights.
^ Pull the support bar upwards and
click it back into position at the
required height.
Use the low setting for small glasses
and tumblers.
Use the high setting for tall glasses and
stem ware.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjusting the upper basket
To adjust the upper basket downwards:
In order to gain more space for taller
items the upper basket can be adjusted
on three levels with 2 cm between each
level.
^ Pull up on the levers at the sides of
the upper basket.
^ Adjust the basket to the desired
height and then release the levers to
lock the basket in place.
The upper basket can also be set at an
angle with one side high and the other
side low. Make sure, however, that the
basket can slide smoothly in and out of
the cabinet.
Depending on the setting of the upper
basket, the following plate dimensions
can be accommodated.
Depending on the setting of the upper
basket, a variety of plate dimensions
can be accommodated.
^ Slide out the upper basket.
To adjust the upper basket upwards:
^ Lift the basket up until it clicks into
place.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Lower basket
^ For larger and heavier items such as
plates, serving platters, saucepans,
bowls, etc.
Glasses, cups, small plates and
saucers can also be arranged in the
lower basket.
Dishwasher with cutlery tray
^ Place large platters and dishes in the
center of the lower basket.
When tilted, plates up to 13 3/4"
(35 cm) in diameter can be
accommodated.
Heavily soiled items
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Removable MultiComfort insert
Glass rack
The rear section of the lower basket is
used for cups, glasses, plates, pots
and pans.
^ The glass rack can be raised to make
more room for tall items.
^ Stem glassware, e. g. wine glasses,
champagne flutes or beer glasses,
can be leaned against the glass rack
or suspended from it.
You can remove the MultiComfort insert
to provide more space for larger items
such as pots and pans.
The height of the glass rack is
adjustable.
To remove the insert a
^ Press the yellow handle forwards and
^ Slide the glass rack to the desired
height until the catches click into
place at the top.
remove the insert.
To replace the insert b
^ Slide the hooks of the insert under
the struts of the lower basket.
^ Push down on the insert to snap it
into position.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Universal support bar
Foldable spikes
The support bar will hold tall glasses
and stem-ware securely.
The rows of spikes can be lowered to
make more room for larger items, such
as casserole dishes.
^ Fold the bar down and lean the
desired glasses against it.
^ Press the yellow lever down a and
fold down the spikes b.
^ If desired, a section of the cutlery tray
can be removed to allow for even
taller glasses.
Vase / Bottle insert
The vase / bottle insert can be used to
rinse narrow items, e.g. vases, baby
bottles, etc.
^ Pull the insert up a and bend to the
side b, if not needed.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery
Split cutlery tray
(depending on model)
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders.
^ Arrange the cutlery as shown in the
cutlery tray.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Spoon heads should be placed in
contact with at least one of the serrated
retainers on the base of the cutlery tray
to ensure that water runs off them
freely.
The upper spray arm must not be
blocked by tall cutlery items (e.g.
cake servers).
^ You can use the yellow slide to adjust
the height of the middle section of the
cutlery tray to make more room for
large items of cutlery.
The side sections of the tray can be
moved into the middle to accommodate
tall dishware items in the upper basket.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery basket
Cutlery insert for the cutlery basket
(depending on model)
Use the insert supplied for heavily
soiled items of cutlery.
The insert separates the items so that
they can be reached better by the
spray jets.
The cutlery basket can be placed
anywhere on the front rows of spikes in
the lower basket.
^ To avoid risk of injury, knives and
forks should be placed with the
handles upwards in the basket.
However, cutlery placed handle
down in the basket will come out
cleaner and drier.
^ Fit it onto the cutlery basket if
required.
^ Place small items of cutlery in the
individual slots on three sides of the
cutlery basket.
^ Insert cutlery with the handles facing
downwards, and distribute them
evenly along the insert.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Optional dishwasher accessories are available from your Miele dealer, Miele or
Mieleusa.com (depending on your model some may already be supplied with your
machine as standard).
If you would like to...
the following accessory will need
to be ordered...
...wash a Miele Cappuccinatore
...wash additional items of cutlery
...wash long-stemmed glassware
... a Cappuccinatore insert for the
upper basket.
... a cutlery basket for the lower
basket.
... a glassware rack for the lower
basket.
MieleCare Collection
Miele branded cleaning and care products, including dishwasher salt, detergent
and rinse aid, are available to order from your Miele dealer, Miele or the on-line
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Detergent
You can use powder, gel or tab
detergents. Follow the dosage
information on the detergent
packaging.
,Dishwasher detergents contain
irritant and corrosive ingredients.
Avoid inhaling or swallowing
dishwasher detergent.
If using a Tab detergent see "Settings -
Deactivate indicators".
Keep children away from detergent.
Keep detergent out of the reach of
children. Keep children away from
the dishwasher when the door is
open. There could still be detergent
residues in the dishwasher. Only
add detergent just before starting
the program and lock the door with
the child safety lock (depending on
model).
Detergent tabs are not recommended
for use with the program "Express"
(depending on model). The tabs may
not dissolve completely.
Dishwasher cleaning products are
available from MIele.
,Only use detergents formulated
for domestic dishwashers.
Use only the recommended amount
of detergent. Continued use of too
much detergent may cause machine
damage.
When using the "China & Crystal"
program (depending on model)
reduce the amount of detergent
used to at least ½ of the normal
dosage. Also make certain your
china and crystal are dishwasher
safe.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Adding detergent
^ Add detergent to the compartments
and close the container flap.
^ Press the latch on the detergent
dispenser. The flap will spring open.
^ Use one tab or add powder or gel
detergent to compartment II and
close the flap.
The flap is always open at the end of a
program.
^ If a Pre-rinse is desired, and
available for your chosen program,
add 1 teaspoon (5 ml) of detergent to
compartment I.
Compartment I holds a maximum of 2
teaspoons (10 ml),
compartment II holds a maximum of 3.5
tablespoons (50 ml) of detergent.
The horizontal marks in compartment II
indicate the levels of approximately 1 ¼
and 2 tablespoons (20 and 30 ml)
respectively. The marks indicate the
approximate fill level in ml when the
door is open in a horizontal position.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning on
^ Open the water supply, if closed.
^ Open the door.
^ Make sure the spray arms can rotate freely.
^ Turn the dishwasher on K.
The main menu shows in the display.
If the memory function is selected, the last selected program
is displayed. See "Settings J - Memory".
} Sensor Wash
Main menu
} Express
r
Selecting a program
Choose your program according to the type of load and
soiling.
The "Program guide" describes the programs and
application.
^ Select the desired program.
The display changes to the program menu.
Sensor Wash
1:32 h
12:00
} Options
Start }
Information about the selected program can be displayed
by pressing the K button.
To choose another program use the U (Clear) button to
return to the main menu.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Program guide
When to use
Program sequence
Pre-rinse Main
wash
Interim
rinse
Final Drying
rinse
1
2
1
2
Pots & Pans
For normally soiled pots &
pans with dried on food, and
heavily soiled dishware, use
120% detergent
X
X
X
X
X
recommended.
Normal
Program for completely
as
X
X
X
X
washing a full load of
required
normally soiled dishware with
the ability to adjust energy and
water consumption based on
the soil load of the dishware.
China & Crystal
For temperature sensitive
glassware and lightly soiled
as
X
as required
X
X
requ
dishware, use 50% detergent ired
recommended.
SaniWash
Extra Quiet
Rinse & Hold
Express
To sanitize dishware, e.g.
baby bottles, cutting boards
and preparation dishware.
X
X
X
X
X
X
X
Very quiet program for
normally soiled dishware
with dried on food.
X
To rinse dishes when a
complete program is not
needed.
X
"Quick program" for lightly
soiled dishware, e.g. party
dishware or to remove salt
traces from the wash cabinet
after refilling salt; not suitable
for detergent tabs
X
X
X
X
Heavy Soil
Light
For heavily soiled dishware
X
X
X
X
X
X
X
X
X
with dried starchy food
For lightly soiled dishware,
e.g. party dishware
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Program guide
When to use
Program sequence
Pre-rinse Main
Interim
rinse
Final Drying
wash
rinse
1
2
1
2
Energy Saver
Sensor Wash
Starch/Cheese
The water intake temperature
must be 115°F (45°C) for light
to normally soiled dishware
X
X
X
X
X
X
X
X
X
X
Sensor controlled program for
as
as required
normally soiled dishware
requ
ired
For dishware with dried on
starchy or cheesy food; 120%
detergent recommended
X
X
Plastics
To gently clean dishwasher
safe plastics and plastic toys
X
X
X
X
X
X
X
X
X
X
Tall Items
For extra large, heat resistant
items, e.g. large vases.
Remove upper basket
Glass no rinse aid For a quick cleaning of
cold glassware for direct reuse; use
without detergent and rinse
aid
X
X
X
X
X
X
Glass no rinse aid To wash glassware without
warm
detergent and rinse aid; rinse
cycle with warm water
Usage:
Electric:
Water:
0.01 - 1.3 kWh
1.1 - 5 gal (4 - 19 l)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Selecting options
Intensive lower basket:
Options can be added to the selected
program.
– For washing heavily soiled dishes in
the lower basket at the same time as
delicate items in the upper basket.
This function will increase the
^ Select the Options menu.
The display shows the available options
for the selected program.
cleaning power in the lower basket in
programs which it is selected.
Depending on the program, the run
time may be extended slightly.
Available options:
Turbo:
Once this function is set for a
program it will remain active for that
program until the setting is changed.
– For shortening the program duration.
To achieve optimum results, energy
consumption rates will increase.
^ Select the desired options.
When the "Turbo" function is used in
correlation with a program a quick
rinse is completed without heating.
The selected options are marked with a
L check.
Use when a complete program is not ^ To de-select an option press the
needed.
respective control again.
Pre-rinse:
^ Confirm the selected options with
OK.
– For easily removable soiling
Soak:
The display changes back to the
program menu. The message Options
selected will appear in this display.
– To soak stubborn soiling.
When using powder detergent, fill
approx. 1 teaspoon (5 g) of
detergent in detergent
compartment I.
Extended drying:
– To enhance drying of odd shaped
dishware and plastic items.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Starting a program
Time display
^ Select Start.
Before the program starts, the time
display shows the running time of the
selected program in hours and minutes.
During the running program the
remaining time is shown in the time
display.
The display shows Close the door.
To select another program or to add
options, select Back and cancel the
program with Cancel.
^ Start the program by closing the
The running time for the same program
may vary depending on the intake
water temperature, load size and
soiling.
door.
The optical interface lights to indicate
that a program is running.
The program starts and "Items can be
added" appears in the display.
As long as this reference is shown,
tableware can be added to the
machine without impairing the cleaning
result.
When a program is selected for the first
time, a time is shown which equals an
average program running time with
cold water.
Each time a program is run, the
electronic adjusts the program running
time according to the intake water
temperature and the load size.
,The water in the dishwasher is
hot, risk of burns by splashing water.
Cancel a program only in the first
few minutes. Otherwise important
program steps (e.g. the water
softening) could be interrupted.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Standby
At the end of a program
A few minutes after the last key is
pressed or at the end of the program
the dishwasher switch into Standby
mode to save energy.
At the end of a program the optical
control light flashes slowly with the door
closed.
The optical function light goes out one
^ To turn the dishwasher back on press hour after the end of a program.
K.
At the end of a program the display
This feature can also be turned off (see shows Program finished or Drying plus
"Settings - Optimize standby"). The
dishwasher will then turn off after
6 hours.
with the door slightly open (if activated).
In the "Express" program, the drying
fan will run for a few minutes after
the program is completed.
If refill salt and/or rinse aid or a fault
are present in the display, the
dishwasher will not turn off.
,Dishes tend to chip if removed
still hot from the dishwasher. If the
automatic door opening setting is
deactivated (see "Settings - Drying
plus") it is recommended to open the
door manually to allow tableware to
cool much faster.
The refill messages can be turned
off when you use a tab detergent
(see "Settings-Refill display").
Fault messages cannot be turned
off.
^ The dishes can now be removed.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
^ Push the baskets in.
^ Turn the dishwasher off K.
The dishwasher continues to use
electricity until turned off with the K
button. After a few minutes the
dishwasher will turn off
automatically.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Preparing your appliance for
an extended vacation
Interrupting a program
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
enough to reduce the risk of a leak.
,Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
To be completely safe, you must
turn off the water supply to each
individual appliance. This means
under the sink for a dishwasher, at
the laundry bib for your washer, etc.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Changing a program
If the detergent flap is already open, do not change the
program.
If a program has already started and you wish to change it:
^ Open the door.
Sensor Wash
Main wash
1:32Std
12:00
Cancel }
^ Select Cancel and confirm with OK.
The program is canceled.
Sensor Wash
12:00
Program finished
Main menu }
^ Select Main menu.
The display changes to the main menu.
^ Select the desired program.
^ Select Start.
^ Start the program by closing the door.
The optical interface lights. The program starts.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Delay start
The starting time of a program can be delayed between 15
minutes and 24 hours. The start can be delayed in
15-minute-increments.
When using the "Delay Start" function make sure that the
detergent compartment is dry before adding detergent,
use a cloth if necessary. The detergent might stick
together and not get completely rinsed out.
Do not use liquid detergent when selecting "Delay Start",
the detergent could leak out of the compartment.
,It is recommended to add the detergent and lock the
dishwasher door to prevent children from coming in
contact with the detergent.
^ Open the door.
^ Turn the dishwasher on K.
The K indicator lights.
^ Select the desired program.
^ Select "Delay start,".
The display shows the current time of day and the last
selected Start time, The program end time is also shown.
The indicator , lights.
} +
} -
Start time 12:00
End at 13:32
12:00
OK }
^ Select the desired Start time with the +/- buttons. Holding
the button will automatically increase or decrease the time.
The end time will be automatically adjusted.
^ Confirm with OK.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
The display changes to the program menu.
^ Select Start.
^ Close the door.
The program starts automatically at the selected time.
The indicator , goes out.
A few minutes after the last key press, the dishwasher will
switch into standby mode to save energy. The display and
the indicators will turn off.
Starting a program before the delay start has elapsed:
A program can be started before the delay start time has
elapsed.
^ Open the door.
^ Select Cancel and confirm with OK.
The d indicator lights.
Sensor Wash
12:00
Program finished
Main menu }
^ Select Main menu.
^ Select the desired program.
^ Select Start.
^ To start the program, close the door.
The optical interface lights to indicate that a program is
running.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
BrilliantLight
The dishwasher is equipped with an
interior light. With the door open the
light turns off automatically after
15 minutes
The light can also be turned off.
^ Open and close the door quickly 3
times. The door must be opened
enough so that the interior lighting
turns on then off.
From now on the interior lighting is
turned off.
^ To turn the light on again, repeat the
above process.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
!
The "Settings J" menu allows you to adjust standard settings
Opening the Settings J menu
^ Turn the dishwasher on K.
The main menu shows in the display.
If the memory function is selected, the last selected program
is displayed. See "Settings J - Memory". Switch to the main
menu by pressing "Clear" U.
} Settings F
Main menu
} Sensor Wash
r
r
^ Select "Settings J".
The display changes into the menu "Settings J".
} Language
F
Language
} Time of day
^ Select the menu option you would like to change.
Press the : button to see more information about the
option currently selected.
The selected options in the submenus are marked with a
check L.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
!
Language J
Time of day
The display contents can be shown in
different languages.
This selection allows the clock to be
shown as 24 or 12 hours. The clock can
also be set from here.
The displayed language can be
changed by the submenu
"Language J".
Setting the clock format
^ Select "Format".
^ Select the desired language and
confirm with OK.
^ Select the desired clock format and
confirm with OK.
The flag behind the word
Language J serves as a guide when
an unfamiliar language is selected.
Select the respective menu with a
flag until the submenu Language J
appears.
Set the time of day
^ Select "Set manually".
^ Set the hour with +/- and confirm with
OK. Set the minutes and confirm.
After confirming the minutes with OK,
the display will revert to the previous
menu.
^ Touch "Clear" to get back into the
Settings J menu.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
!
Water hardness
°d
gr/gal
Setting in display
Your dishwasher is fitted with a water
softener which you need to program to
the water hardness level in your area,
see "Before the first use".
1
2
1
2
1
2
3
3
3
4
4
4
5
5
5
^ Turn the dishwasher on K.
6
6
6
7
7
7
If the memory function is on, the
program menu instead of the last
selected program will be displayed
(see "Settings - Memory"). If this is the
case use the U button in the main
menu.
8
8
8
9
9
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37-45
46-60
61-70
10
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38-46
47-62
63-73
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
45
60
70
^ Select Water hardness from the
"Settings !" menu.
The set water hardness is marked
with a check (.
^ Select the water hardness of your
local water supply, confirm with OK.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
!
Rinse aid
Adjust Sensor Wash
For best results the rinse aid dosage
can be adjusted.
The "Sensor Wash" program can be
adjusted to clean stubborn but normal
soiling.
The dosage can be set between 0 and
6 ml.
^ Select Yes and confirm with OK.
The dosage set by default to 3 ml of
rinse aid per program.
Drying Plus
– Use a higher setting if spots appear
on dry glassware.
To improve the drying process the door
will open (except during the "Extra
Quiet" program) at the end of the
program during the drying phase.
– Use a lower setting if streaking
appears on dishes or glasses.
This feature can be turned off.
^ Selected the desired rinse aid
amount and confirm with OK.
^ Select the desired setting and
confirm with OK.
,If you turn the Drying Plus
function off and still want to open the
door at the end of a program, then
open the door completely.
Otherwise steam can damage the
countertop edges, because the fan
will continue to run.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
!
Optimize standby
Refill display
A few minutes after the last key is
pressed or at the end of the program
the dishwasher will switch into Standby
mode to save energy.
When consistently using multi-function
Tab detergents, you can turn off the
refill displays.
^ Select the desired setting and
This function can also be turned off.
The dishwasher will then turn off
completely after 6 hours.
confirm with OK.
Be sure to turn this setting back on if
you stop using multi-function tab
detergents.
^ Select the desired setting and
confirm with OK.
If refill salt and/or rinse aid or an fault
are present in the display, the
dishwasher will not turn off.
Check filters
This selection allows you to set the
number of programs run before the
filter check message shows.
You can select between 30 and 60
programs.
The refill messages can be turned
off when you use a tab detergent
(see "Settings-Refill display").
Fault messages cannot be turned
off.
The filter check message is set by
default to 50 programs.
^ Select the desired number of
programs and confirm with OK.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
!
Reorganize programs
The order of the programs in the program list can be
reorganized. The two most frequently used programs can be
saved to the first two positions.
} Sensor Wash B
e
} Cancel
Select program for position
Continue }
^ Select with e the program which you would like to save to
the first position of the main menu. Confirm the selection
with the button next to the program.
^ Confirm with Continue.
^ Repeat with the second program.
The selected programs are displayed as programmed.
To change a program position, select Back until you reach
the respective program position.
^ When you are done reorganizing the program list, confirm
with Finished.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
!
Save options
Buzzer
Additional options can be selected for
some programs, e.g. extended drying.
See "Use - Selecting options".
When the buzzer is activated, a tone
sounds at the end of a program and if a
fault occurs.
Save options allows you to save the
selected options for future use of the
program.
The buzzer at the end of a program is
turned on by default.
Buzzer at the end of a program
This function is turned off by default.
The buzzer at the end of a program
sounds five times in intervals with a
brief break in between. The buzzer
sounds up to one hour if the
^ Select the desired setting and
confirm with OK.
Temperature
dishwasher in not turned off.
The temperature can be displayed in
"°C/Celsius" or "°F/Fahrenheit".
Buzzer in case of a fault
The buzzer for a fault sounds
The temperatures are shown in
°C/Celsius by default.
continuously. The buzzer sounds up to
two minutes if the dishwasher is not
turned off or the fault is fixed.
^ Select the desired temperature unit
and confirm with OK.
The buzzer for a fault cannot be set
to off.
Buzzer tone
The buzzer volume can be set to 17
different levels.
The buzzer cannot be turned off in
case of a fault.
^ Select the desired volume.
^ Confirm with OK.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
!
Keypad tone
RemoteVision
A tone will sound when a button is
pressed.
(Optional accessory.
To learn more about RemoteVision
visit www.miele.com.)
The volume can be set to 17 different
levels.
^ Select e to show module state.
^ Select the desired setting and
If "K module connected and ready" is
confirm with OK.
displayed, no further action is required.
Via the "Options" menu you can:
– Reboot the module
Brightness
The display brightness can be adjusted
in 17 levels.
– Reset the factory default settings
– Enter Ad-Hoc mode
^ Select the desired brightness and
confirm with OK.
Refer to the "RemoteVision" section
of this manual or the RemoteVision
Installation manual for further
instructions.
Memory
The memory function allows you to save
the last selected program.
When turning the dishwasher off and on
again after a program has finished or
opening and closing the door, the last
selected program is displayed instead
of the main menu.
The function is turned on by default.
^ Select the desired option and confirm
with OK.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
!
Showroom program
Turning the Showroom program on
^ Select the desired option, confirm
Demo modes are only for
showrooms.
with OK.
^ Confirm the following messages with
The dishwasher has various demo
programs for showrooms.
OK.
^ Press any button to start the selected
The programs "Demo mode" and
"Endless demo mode" show the use
and function range of the dishwasher.
demo mode.
^ To cancel the demo mode press any
button again and confirm with OK.
– Demo mode:
The program is started by pressing
any button. It runs once and must be
started again.
Turning the Showroom program off
^ Select Off to deactivate the
Showroom program and confirm with
OK.
– Endless demo mode:
The program starts as soon as it is
activated and runs in a loop until it is
turned off.
^ Confirm the message Deactivate
demo mode? with OK.
– Demo wash sound:
Factory default
The program activates the pumps to
demonstrate the wash sound.
All settings can be reset to factory
default.
– Trade show mode:
^ Confirm the message Reset to factory
Once the machine is used for the
first time this option is disabled in the
display.
default? with OK.
^ Confirm the information All settings
are reset to factory default with OK.
– Drying Plus Demo:
The door opens automatically.
Leaving the "Settings J menu"
^ To leave the "Settings J" touch the
"Clear" U control. The main menu
appears.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
RemoteVision
Miele's RemoteVision Wi-Fi technology
creates a 'virtual link' between your
appliance and our monitoring center. If
a fault occurs, Miele's client service
center will be notified and contact you,
or another trusted individual identified
on your call roster, in order to gain
access to your appliance to fix the
problem.
Be sure your wireless system meets the
following requirements
– A wireless router that supports an
IEEE 802.11b protocol
– Windows XP® or newer operating
system, Mac® OS X 10.3 or higher
– Cable or DSL modem
– Microsoft® Internet Explorer 6 or
higher, Safari 2.0 or higher, Firefox
1.5 or higher
For information on set-up and
installation of the RemoteVision module,
see the separate RemoteVision
installation manual.
* Please note that each wireless router
manufacturer supplies their own
device drivers and setup programs.
Due to the differences in
manufacturers, exact router setup
instructions are not included in this
manual. Wording and instructions
may vary.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
,Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem
Possible fault
Solution
The program does not
start.
The door is not properly
closed.
Close the door firmly.
The machine is not
plugged in.
Insert the plug.
The fuse has tripped.
Reset the circuit breaker.
See data plate for
minimum amperage.
The dishwasher is not
turned on.
Press g and select a
program.
No program is selected. Select the desired
program.
Reset the circuit breaker.
The dishwasher stops
during a program.
The fuse has tripped.
See data plate for
minimum amperage.
The optic indicator is
not visible when a
The reflector was not
properly installed.
Install the reflector
properly, see the
Installation diagram.
program has started.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problem
Possible fault
Solution
The optical interface
flashes fast, the buzzer
sounds or the display
shows the fault:
Before trying to remedy the
fault:
– Turn the dishwasher off
with the K button.
;
Technical fault FXX
There may be a
technical fault.
After a few seconds:
– Turn the dishwasher on.
– Select the desired
program.
– Close the door.
If the problem persists,
contact Technical Service.
Waterproof fault F70
The waterproof system – Turn off the water supply.
has activated.
Contact Miele Technical Ser-
vice.
Automatic door closing
fault F32
The door may be
blocked.
– Remove the item, if
necessary restart the
program.
If the message shows again
contact Miele Technical Ser-
vice.
Automatic door opening
fault F33
Possible technical fault. – Open the door by hand
and restart the program.
If the message shows again
contact Miele Technical Ser-
vice.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problems water intake/drain
Problem
Possible fault
Solution
The optical interface
flashes fast, the buzzer
sounds and the display
shows the fault:
Water intake fault
The water supply is
closed.
Open the water supply all
the way.
Fault water intake F12/F13
Before fixing the fault:
– Turn the dishwasher off
K.
Fault in the water intake. – Open the water supply all
the way.
– Check and clean the
water intake filter, see
"User Maintenance
Instructions".
– The water pressure at the
water connection is lower
than 4.35 psi. Consult a
plumber.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problem
Possible fault
Solution
The optical interface
flashes fast.
The intake water does
not have a minimum
– Restart the program.
– If the fault is displayed
again, use a different
program.
The program "Energy temperature of 115°F
Saver" displays the
fault:
(45°C). See "Plumbing".
Water intake temp. too
low
The optical interface
flashes fast, the
buzzer sounds and the
display shows the
fault:
Before fixing the fault:
– Turn the dishwasher off
with the K button.
Fault F11:
– Clean the triple filter.
Fault in the water drain.
There might be water in
the wash cabinet.
– Clean the drain pump and
the non-return valve.
Drain fault F11
See "User Maintenance
Instructions" for more
information on the above.
– Remove any kinks in the
drain hose.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
General problems with the dishwasher
Problem
Possible fault
Solution
The display is dark.
The dishwasher has
gone into "Standby"
mode to save energy.
– Turn the dishwasher off
using the K button.
The interior lighting is The interior light was
– Turn the interior light on
(see "Additional options-
BrilliantLight").
not turned on when
the door is opened.
turned off.
The optical function
flashes rapidly.
The middle or lower
spray arm is blocked by
dishware.
– Open the dishwasher door
and rearrange items
The buzzer sounds.
The display shows the
following fault
blocking the spray arms.
The spray arm jets of
the middle or lower
– Turn the dishwasher off K.
Then:
message:
spray arm are clogged.
– Clean the spray arms. See
"User Maintenance
Instructions".
Middle spray arm
blocked
or
Lower spray arm blocked
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problem
Possible fault
Solution
Detergent is left in the The dispenser was damp Dry the dispenser before
dispenser at the end when detergent was
adding detergent.
of a program.
added.
The detergent lid
cannot be closed
properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
This is not a fault! It is the The moisture will evaporate
interior walls are still normal operating mode of after a short time.
wet after a program
has finished.
the drying system.
Water remains in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Turn the dishwasher off
K.
The triple filter in the wash Clean the triple filter. See
cabinet is clogged.
"User Maintenance
Instructions".
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve, see
the "User Maintenance
Instructions".
The drain hose is kinked.
Remove any kinks from the
drain hose.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Sounds
Problem
Possible fault
Solution
There is a knocking
noise in the wash
cabinet
The spray arm is hitting an Interrupt the program,
item in the basket. rearrange items blocking
the spray arms.
Items are not secure in the Interrupt the program, and
There is a rattling
noise in the wash
cabinet
wash cabinet.
rearrange loose pieces.
A foreign object has
become lodged in the
drain pump.
Remove the foreign object
from the drain pump (see
"Cleaning the drain pump
and non-return valve")
There is a knocking
This may be caused by
This has no effect on the
dishwasher. If in doubt,
contact a plumber.
noise in the water line the installation or the
diameter of the pipe.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Poor cleaning results
Problem
Possible fault
Solution
The dishes are not The dishes were not
See "Loading the
dishwasher".
clean.
loaded correctly.
The program was not
powerful enough.
Select a more intensive
program (see "Program
Guide").
Not enough detergent was Use more detergent, or
dispensed.
change the detergent.
The spray arms are
blocked.
Turn the spray arms and
rearrange the dishes if
necessary.
The triple filter in the wash Clean the filter and insert it
cabinet is clogged or not correctly. Clean the spray
correctly inserted. arm jets, if required (see
The spray arm jets might "Cleaning and care").
be clogged as a result.
The non-return valve is
Clean the drain pump and the
stuck open and blocked. non-return valve (see
Wash water will run back "Cleaning and care").
into the wash cabinet.
Glasses and cutlery The rinse aid dosage is
Reduce the dosage (see
"Settings - Rinse aid").
show streaks. The
glasses take on a
bluish shimmer; the
deposits can be
wiped off.
set too high.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problem
Possible fault
Solution
Dishes are not dry, The rinse aid setting may be Increase the dosage, refill
glasses and
cutlery are
spotted.
too low, or the rinse aid
reservoir is empty.
the reservoir or switch the
rinse aid product when
refilling (see "Rinse aid").
Dishes were taken out too
soon.
Leave dishes in longer (see
"Use").
A "Tab" product was used.
Change the detergent, or
These products have a low refill the rinse aid (see "Rinse
drying effect.
aid").
White residue is
Not enough rinse aid was
Increase the dosage (see
"Setting the rinse aid
dosage").
visible on cutlery used.
and dishes.
Clouding occurs
The salt container is empty. Refill the salt container (see
"Filling the salt container").
on glassware and
cutlery; film can be
wiped off.
The salt container lid was not Reseat it making sure it
screwed on properly.
screws back on correctly.
Unsuitable "Tab" products
were used.
Use a different detergent.
Use normal (powder or gel)
detergent.
The water softener is
programmed on too low a
setting.
Program a higher water
softener setting (see "Water
softener").
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problem
Possible fault
Solution
Glasses have a
Detergent deposits.
Change detergent right
away.
brown or blue
discoloration; film
cannot be wiped off.
Glasses are dull and Glasses are not dishwasher There is no remedy.
discolored; film
safe. The surface is
Only use dishwasher safe
glasses.
cannot be wiped off. affected.
Tea or lipstick stains The wash temperature of
Select a program with a
have not been
completely removed. too low.
The detergent has a low
the selected program was higher wash temperature.
Use a different detergent.
bleaching effect.
Plastics are
discolored.
Natural dyes e.g. from
carrots, tomatoes or
Use more detergent (see
"Detergent").
ketchup may be the cause. Discoloration is permanent.
Not enough detergent was
used to break down natural
dyes.
There are rust stains The affected items are not There is no remedy.
on cutlery.
corrosion resistant.
Use only dishwasher safe
cutlery.
No program was run after
refilling salt. Salt residuals
got in the wash cycle.
Start the "Express" program
without a load after refilling
salt (without the "Turbo"
option).
The salt container lid was
not screwed on properly.
Reseat it making sure it
screws back on correctly.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
Repairs
MieleCare
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
(USA only)
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
^ Please quote the model type and
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
number of your appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles a service technician will be able
to input these into your machine
controls via the indicator light marked
PC. Miele will provide information when
such possibilities become available.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Transport
To transport the dishwasher, e.g. when
moving to a new home, note the
following:
– Empty the dishwasher.
– Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
– Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
User Maintenance Instructions
To prevent accidents
and machine damage,
read these instructions
before
installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Exterior
Check and clean your dishwasher
regularly. This will help avoid faults
and problems.
^ Use a conditioner suitable for your
kitchen cabinetry.
^ Clean wood with a damp cloth and
wipe dry.
,Abrasive cleaning agents,
all-purpose cleaners, thinner or
ammonium cleaners should not be
used on the dishwasher.
Clean the exterior with a solution of
warm water and liquid soap applied
with a soft sponge. Dry with a soft
cloth.
They will damage the surface.
Wash cabinet
Glass cleaners may be used to
clean the exterior. However do not
allow them to sit or "puddle", this can
cause damage to the surface.
Remove the cleaner promptly.
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as "Dis
Cleaner" available from your Miele
To better maintain your appliance
avoid the following:
– cleaners containing soda, ammonia,
thinners, or chlorides
Door and the door seal
^ Wipe the door seals regularly with a
– cleaners containing descaling
agents or lime removers,
damp cloth to remove food deposits.
^ Food residue and spilled liquids
should be wiped from the sides of the
dishwasher door. These are outside
of the wash cabinet and are not
cleaned by water from the spray
arms.
– abrasive cleaners,
– stainless steel cleaners,
– dishwasher soap (powder),
– caustic (oven) cleaners,
– scouring pads, steel wool, hard
brushes,
– metal scrapers,
– steam cleaning products.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Indicator reflector
The reflector of the optical interface is
located in the steam deflector beneath
the counter top.
^ Clean as necessary with a damp
cloth.
Control panel
^ Clean the control panel as necessary
with a damp cloth.
,The appliance front and controls
are not scratch proof.
Remove spills immediately.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Triple filter system
Cleaning the triple filter
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones, etc.). During normal use,
the filter system is self-cleaning.
,The machine must not be used
without all the filters in place!
^ Check and clean the filter system
periodically for any trapped or
foreign objects.
^ Turn off the dishwasher before
The level of soiling and time it takes
before the filters need cleaning will vary
depending on household.
cleaning.
^ Turn the handle counterclockwise to
release the triple filter system, a.
The display shows Filter check after
50 wash cycles (default setting).
^ Remove the triple filter from the
machine. Clean any solid particles
and rinse under running water. Scrub
with a nylon brush if necessary.
The filter check frequency can be
set from 30 to 60 cycles. See
"Settings J - Filter check".
,Be sure that debris does not get
into the circulation pump causing it
to clog.
^ Check and clean the triple filter.
^ Confirm with OK.
The display changes to the program
menu.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
To clean the underside of the filter the
flap must be opened.
^ Return the filter so it lies flat in the
base of the wash cabinet.
^ Push the clips together a and open
the flap b.
^ Lock the filter by turning the handle
clockwise.
^ Rinse under running water.
,The triple filter system must be
inserted and locked. Large particles
could get in the circulation system
and cause blockage.
^ Close the flap so that the clip
engages.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before
cleaning.
Removing the spray arms
^ Remove the cutlery tray (if present).
^ Push the upper spray arm up to
engage the inner ratchet and
unscrew the spray arm.
^ Pull the lower spray arm firmly
upwards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a
toothpick to push food particles into
the spray arm jets.
^ Remove the lower basket.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check that
they rotate freely.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the water inlet filter
A filter is incorporated into the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
,The plastic housing of the water
connection contains electrical
wiring.
Do not cut the intake hose or
submerge it in liquid.
^ Carefully remove the rubber seal.
Installing an in-line water filter
^ Remove the filter using needle nose
pliers and rinse it under running
water.
If your water contains a large number of
insoluble substances, a filter between
the water valve and the intake hose
connection is recommended. These
filters can be purchased from Miele.
^ Reinsert the filter and seal. Make sure
they are seated correctly.
^ Screw the intake hose back on the
water valve, checking that it is not
cross-threaded.
Cleaning the filter
^ Turn off the dishwasher and pull the
plug.
^ Slowly turn on the water supply and
^ Turn off the water supply.
test for leaks.
^ Unscrew the intake hose.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher and pull the
plug.
^ Remove the triple filter (see "Triple
filter system").
^ Use a cup or bowl to scoop water out
of the wash cabinet.
The drain pump is beneath the
non-return valve (see arrow).
^ Remove all foreign objects from the
drain pump (glass or bone splinters).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully reinsert the non-return valve
and secure it with the locking clamp.
,Make sure the locking clamp
clicks into place!
^ Tilt the locking clamp to the side a.
^ Pull out the non-return valve b and
rinse it under running water.
^ Remove all foreign objects from the
non-return valve.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
Please refer to the Installation Diagram supplied with these instructions.
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Help to protect the environment
Disposal of the packing
material
Disposal of an old machine
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
The cardboard box and packaging
protect the appliance during shipping.
These materials are biodegradable and
recyclable. Please recycle.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
,Installation, repairs and other
work by unqualified persons could
be dangerous.
,Improper connection of the
equipment grounding conductor
can result in electric shock. Do
not modify the plug provided with
the appliance; if it will not fit the
outlet, have a proper outlet
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household mains
supply.
installed by a qualified electrician.
If there is any question
concerning the proper electrical
connection or grounding of this
appliance to the power supply,
please consult a licensed
The power outlet must be accessible
after installation. Do not use an
extension cord to connect the
dishwasher to the mains. Danger of
overheating! See data plate on the
right side of the door.
electrician or call Miele’s
Technical Service Department:
U 1-800-999-1360
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele service technician.
V 1-800-565-6435
Specifications
The dishwasher comes equipped with a
4 ft (1.2 m) power cord with a molded
plug for connection to 120 V, 60 Hz,
15 A grounded receptacle.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
In the event of a malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for the electrical
current. This appliance is equipped
with a cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is installed and
grounded in accordance with all local
codes and ordinances.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Hardwired electrical connection
,Prior to making a hardwire
connection to the terminal, remove
the power cord. Otherwise there will
be a risk of electric shock from the
attached plug.
It is possible to hardwire this appliance
to an existing power cable.
,CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually
An existing flexible supply cord or
cable shall have a minimum thickness
of AWG 14.
"tripping" the circuit breaker.
120 V, 60 Hz, 15 A fuse rating
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and
the manufacturer cannot be held
responsible.
Black wire (live):
connect to L
White wire (neutral): connect to N
Green wire (ground): connect to -
,After attaching the permanent
power supply cord, check that all
screws on the terminal block and the
strain relief are tightened.
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
This appliance must be connected to a
grounded metal, permanent wiring
system, or an equipment-grounding
conductor must be run with the circuit
conductors and connected to the
equipment-grounding terminal or lead
on the appliance.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Connection to the water supply
If not connected directly to a water
supply valve, an appropriate
,Installation, repairs and other work
by unqualified persons could be
dangerous.
adapter (not included) is required.
– Water pressure: Must be between
4.5 - 145 psi (0.3 - 10 bar).
,Do not drink water from the
dishwasher!
– If the water pressure if lower, a
"Water Intake" notification will be
shown. See "Frequently Asked
Questions" for more information.
– The dishwasher can heat its own water
to the temperature required by the
wash program. This allows for
connection of the machine to either a
hot (max. 140°F / 60°C) or cold water
source.
– If the water pressure is higher than
shown, a pressure reducing valve
must be used.
Ensure that the water connection is
secure after the first use.
For lowest energy consumption you
may connect the dishwasher to a cold
water source.
For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot water
source.
,To prevent damage to the
dishwasher, it must only be
connected to a fully vented drainage
system.
– To use the "Energy Saver" program, a
hot water connection of minimum
115°F / 45°C and maximum 140°F /
60°C (water intake temperature) is
necessary.
,Do not cut the intake hose. If the
hose is cut, the dishwasher will not
work. There will be a water leak. If
the hose is too long, coil it neatly
and place it behind or under the
machine.
The higher the water intake
temperature, the better the cleaning
and drying results.
– The inlet hose is approximately 5 ft.
(1.5 m) long.
– The water inlet hose comes
equipped with an inlet hose ending
with a 3/8" female compression
fitting. This can be directly
connected to a water supply valve or
to an appropriate coupling.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Drainage
– The drain hose must not be
shortened.
– The machine comes equipped with a
built-in non-return valve on the
discharge side to prevent waste
water from flowing back into the
dishwasher.
,Make sure the hose is not kinked
or cut when pushing the machine
under the countertop.
– The dishwasher is equipped with a
5 ft (1.5 m) flexible drain hose with an
internal diameter of 7/8" (22 mm).
Venting the drainage system
If the dishwasher drain hose is
connected to a floor drain or to a drain
pipe that is less than 8" (20 cm) above
the floor, the drain must be vented.
Otherwise the water inside the
dishwasher may siphon out during the
wash program.
– Drain hose extensions and adapters
can be ordered from Miele.
The maximum drain hose length is
13 ft. (4 m), max. drain height: 39"
(1 m).
– Use the clamp provided to attach the ^ Open the dishwasher door and
hose to the dishwashers P trap or
disposal connection (see the
"Installation Diagram").
remove the lower basket.
The hose must always be attached
on the sink side of the P trap.
When attaching the hose to a
garbage disposal fitting, make sure
the plug which is normally blocking
the fitting is knocked out or
removed.
– The hose can be angled to the left or
right side at the rear of the machine.
^ Pull the lower spray arm firmly
upwards to remove.
– The existing nipple that the drain
hose is connected to may be
^ Cut off the vent cap located at the
right rear of the triple filter system, as
illustrated.
designed for various hose diameters.
If the nipple diameter is to large or to
small it should be replaced or an
adapter may be used. If the nipple
extends more than 2" (50 mm) into
the drain hose it should be
shortened, or the hose could clog.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise measurement
General requirements for measuring noise
The dishwasher must be loaded with 16 place settings and the Normal program
must be used.
Installation requirements for measuring noise
The dishwasher must be installed as follows:.
^ Install the dishwasher into an appropriate housing unit.
^ Secure the front panel.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise measurement
^ Push the insulation mat supplied (depending on model) under the plinth until it
is up against the appliance feet a.
^ Attach the toe-kick so that it is flush with the door front b.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 0313
G5970/G5975 /
M.-Nr. 07 909 281 / 01
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|