Operating Instructions
Dishwasher
G 2183
en - US, CA
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 07 724 150
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Problems with water Intake / Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Comparison Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Waterproof system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
Electrical Safety
Before installation, make sure that
~
the voltage and frequency listed on the
data plate correspond with the
When using your dishwasher, follow
basic precautions, including the
following:
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Read all instructions before
installation or use of the dishwasher
to prevent injury and machine
damage.
Before installation or service,
~
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
Use the dishwasher only for its
intended purpose. This appliance is
intended for residential use only.
Do not use an extension cord to
~
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Keep these operating instructions in
a safe place and pass them on to
any future user.
Be certain your appliance is
~
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Installation
, WARNING - Fire hazard
~
Do not cover or crush the plug of the
appliance. Ensure that the cabinet
opening for the dishwasher provides
ample space for the plug. Installing the
dishwasher in a tight space may crimp
the power cord or put pressure on the
The dishwasher must be installed
~
and connected in compliance with the
installation instructions.
Installation and repair work should
~
be performed by a Miele authorized
service technician. Work by unqualified plug which could cause overheating.
persons could be dangerous and may
This dishwasher should only be
~
installed under a continuous counter
void the warranty.
Do not install or use a damaged
top secured to adjacent cabinetry.
~
dishwasher. A damaged appliance is
dangerous. Unplug the machine and
call your Miele dealer or the Miele
Technical Service Department.
Do not install this dishwasher
~
beneath a cooking surface, oven or any
appliance that radiates heat.
High temperatures from these units
may damage the dishwasher.
Ensure that any plastic wrappings,
~
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
When installing the dishwasher
~
under a counter top and removing the
toe-kick, a build-under toe-kick must be
installed. Use the respective installation
kit. Danger of injuries.
This equipment is not designed for
~
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the nearest Miele dealer
or the Miele Technical Service
Do not cut the intake hose or
~
submerge it in liquid. This hose
contains electrical components that
could cause injury or property damage
if cut or submerged.
Department with specific requirements.
Only connect the dishwasher to the
~
mains when all installation and
plumbing work is complete.
It is recommended that the
~
dishwasher only be connected to the
mains with the plug (no hard-wiring).
The outlet must be accessible at all
times after installation to disconnect the
dishwasher.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Use
Do not inhale or swallow detergents.
~
Dishwasher detergents contain irritant
To reduce the risk of injury, do not
~
allow children to play in, on or near the
and corrosive ingredients. They can
cause burning in the mouth and throat if
swallowed, or inhibit breathing. Consult
dishwasher.
Only use the dishwasher if all panels a doctor immediately if detergent has
~
are properly in place.
been swallowed or inhaled.
Do not tamper with the controls.
Do not damage, sit or stand on the
Do not drink water from the
~
dishwasher! Harmful residues could be
~
~
present.
door or baskets of the dishwasher.
Close the door when not in use.
Do not fill the rinse aid reservoir or
~
salt container with detergent. It will
destroy the rinse aid compartment and
water softener.
Under certain conditions, hydrogen
~
gas may be produced in a hot water
system that has not been used for two
weeks or more. HYDROGEN GAS IS
If the power cord is damaged it
~
EXPLOSIVE. If the hot water system has must only be replaced by a Miele
not been used for such a period, turn
on all hot water faucets and let water
flow from each for several minutes
before using the dishwasher. This will
release any accumulated hydrogen
gas. Do not smoke or use an open
flame during this time.
Service technician with a genuine Miele
power cord.
Disposal of an appliance
If the appliance is removed from its
~
installation site and will not be used,
remove the doorlock to the wash
cabinet to prevent children from locking
themselves in the machine.
Be sure that all items placed in the
~
dishwasher are "dishwasher safe". For
items not labeled, check the
manufacturer’s recommendations.
SAVE THESE
When loading tableware, place
~
sharp items away from the door to
prevent damage to the seal. Load
sharp items pointing downwards to
prevent injuries.
INSTRUCTIONS
Only use detergents and rinse aids
~
recommended for residential
dishwashers. Keep all detergents and
rinse aids out of the reach of children.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
a Upper spray arm (not visible)
b Cutlery tray
g Triple filter system
h Data plate
c Upper basket
i Rinse aid reservoir
d Middle spray arm
j Dual compartment detergent
dispenser
e Air inlet for drying
(depending on model)
k Salt container
f Lower spray arm
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Control panel
a Check / Refill indicators
b Program selection
c Program button
d On button g with Indicator
e Off button o
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
This dishwasher is exceptionally
economical in the use of water and
electricity. For best results follow these
tips:
^ For lowest energy consumption you
may connect the dishwasher to a
cold water source.
^ For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source.
^ Make full use of the baskets without
overloading for the most economical
washing.
^ Use the correct amount of detergent
and rinse aid. Detergent dosage is
dependent upon the amount of
soiling and type of dishware being
washed. See the "Program Guide" for
more information.
^ When using powder or gel detergent,
reduce the amount to 2/3 of the
normal amount when washing a small
load.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
^ For small loads select "Express".
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
To close the door
^ Push the baskets in.
^ Lift the door and push until it clicks
into position.
^ Pull the handle to open the door.
If the door is opened during operation,
the dishwasher will stop running. Once
the door is closed the program will
continue.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Water softener
In areas where the water hardness
fluctuates (example 37 - 50 °d [39 -
52 gr/gal]) always program the
machine to the higher value (in this
example 50 °d [52 gr/gal] ).
Every dishwasher is tested before
leaving the factory. Any water
remaining in the machine is from the
final factory test and does not
indicate that the machine has been
used.
If there is a fault, it will help the service
technician to know the hardness of your
local water supply.
To achieve good cleaning results, the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above 4 °d
(4 gr/gal [US]), the water should be
softened.
^ Please note your water hardness::
°d (gr/gal)
The water hardness was programmed
to 1 - 4 °d (1 - 4 gr/gal) by factory
default
– The water softener must be filled with
dishwasher salt for reactivation.
If using "Tab" products which include
salt, you should still add salt to the
machine to achieve optimal cleaning
results.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– The dishwasher must be
programmed to correspond to the
water hardness in your area.
If the hardness of your local supply
is constantly lower than 4 °d (4 gr/gal
[US]), you do not need to add water
softener salt. However the water
hardness level must still be
programmed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Programming the water
softener
The amount set can be recognized by
the flashing rhythm of the "SaniWash"
indicator (see table):
To exit the programming mode at
any time, turn the dishwasher off
with the "O" button.
°d
1 -
5 -
gr/gal
1 - 4
Flashing rhythm
once
4
7
5 - 7
twice
^ Turn the dishwasher off with "o".
8 - 11
12 - 15
16 - 20
21 - 25
26 - 30
31 - 36
37 - 45
46 - 70
8 - 11
3 times
13 - 16
17 - 21
22 - 26
27 - 31
32 - 38
39 - 47
48 - 73
4 times
^ Press and hold the "Program" and "g"
buttons simultaneously. Hold the
program button until the lower right
program indicator lights.
5 times
6 times
7 times
If it does not come on, start over.
^ Press the "Program" button twice.
The "Intake/Drain" indicator
8 times
9 times
1 long flash
The "Intake/Drain" indicators flashes
twice in the display.
^ Select the desired setting with the
"Program" button. Every touch of the
button increases the level.
The "SaniWash" indicator flashes once
in intervals (factory default).
The programmed dosage is saved.
^ Press the "Program" button for at
least one second, until the
^ Turn the dishwasher off "V".
"Intake/Drain" indicator lights up.
Checking the programmed water
hardness level
^ Turn the dishwasher off "V".
^ Press the "Program" button, at the
same time turn the dishwasher on "g".
Hold the "Program" button in until the
indicator lights up.
^ Press the "Program" button twice.
The amount set can be recognized by
the flashing rhythm of the "SaniWash"
indicator (see table).
^ Turn the dishwasher off "V".
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Filling the salt container
,Inadvertently filling the salt
container with dishwashing
detergent will damage the water
softener.
,Only use water softener salt
specially formulated for
dishwashers. Other salts may
contain insoluble additives which
can impair the water softener.
^ Place the provided funnel over the
salt container. Carefully fill with salt.
The salt container holds approx.
4.5 lbs (2 kg) of salt. As it is filled,
water will run out.
^ Remove the lower basket and
unscrew the salt container lid.
When opening the salt container,
water will run out. Open the
container only to refill salt.
^ Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
Important: The salt container must
be filled with 2 quarts (2 l) of water
before adding salt for the first
time. Water does not have to be
added with subsequent refills.
^ If the dishwasher will not be used
immediately, run the "Express"
program. This will remove any traces
of salt from inside the wash cabinet.
Salt indicator
^ When the "Salt" indicator comes on,
refill the salt after the program is
finished.
After the container has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is started. The "Salt"
indicator will be lit during this process.
It will go out once the reactivation
process is complete.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Rinse aid helps to prevent spotting on
dishes and glassware.
The rinse aid is filled in the reservoir
and the set amount will be
automatically dosed.
,Filling the rinse aid reservoir with
detergent will damage the reservoir.
Only pour rinse aid formulated for
residential dishwashers into the
reservoir.
^ Pour liquid rinse aid into the reservoir
until it is visible on the surface of the
screen.
When using "Tab" detergents rinse
aid is not needed.
The rinse aid reservoir holds approx.
3.7 oz (110 ml).
Adding rinse aid
^ Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
reservoir during the wash program.
^ Clean any spilled rinse aid. The flap
will remain closed during normal
operation.
Rinse aid indicator
When the rinse aid indicator first comes
on, there will be enough rinse aid left
for 2 - 3 washes.
^ Press the button in the direction of
^ The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
the arrow until the flap springs open.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Adjusting the dosage
The amount set can be recognized by
the flashing rhythm of the "SaniWash"
indicator (see table):
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 0 to 6.
Dosage in ml
Flashing rhythm
-
0
1
2
3
4
5
6
– Use a higher setting if spots appear
on dry glassware.
Once
Twice
^ Use a lower setting if streaking
3 times
4 times
5 times
6 times
appears on dishes or glasses.
^ Turn the dishwasher off "V".
^ Press and hold the "Program" button
and at the same time turn the
dishwasher on g.
^ Press and hold the "Program" button
until the "Intake / Drain" indicator
lights up.
Hold the "Program" button until the
"Rinse & Hold" indicator comes on.
If it does not come on start over.
^ Select the desired setting with the
"Program" button. Every touch of the
button increases the level.
^ Press the "Program" button three
times.
The "Intake / Drain" indicator flashes
three times in intervals.
The programmed dosage is saved.
^ Turn the dishwasher off "V".
The "SaniWash" indicator flashes 3
times in intervals.
The rinse aid dosage is adjusted to
3 ml by default.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed throughout the
inside of the dishwasher.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
Wax, grease and paint will cause
permanent discoloration and
damage to the dishwasher.
^ Food residue and spilled liquids
should be cleaned from the sides of
the dishwasher door. These are
outside of the wash cabinet and are
not cleaned by water from the spray
arms.
^ Scrape food from dishes before
placing them in the dishwasher,
rinsing is not necessary.
^ Some foods contain natural dyes,
e.g. carrots or tomatoes. Plastic items
may discolor permanently if they
come in contact with food dyes.
^ All items can be placed anywhere in
the baskets.
^ Load dishes so that water can reach
all surfaces. Do not place dishes or
cutlery inside other pieces.
^ Make sure that all items are securely
positioned.
^ Hollow items such as cups and
glasses should be placed upside
down in the baskets.
^ To ensure good water coverage,
tall, narrow and hollow items,
i.e. vases or champagne glasses,
should be placed in the center of the
basket rather than in the corners.
^ Concave based items such as mugs
or bowls, should be placed at an
angle so that water does not pool.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Items not recommended for
dishwashing
Glassware:
– There are no standard guidelines for
washing glassware, when in doubt
wash by hand.
– Cutlery with wooden handles
– Wooden cutting boards
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe. Only wash
items marked "dishwasher safe" in
the dishwasher.
– Glued items such as old knives with
handles glued together around the
shank of the blade
– Handmade craft items, antique,
metal trimmed or decorative
glassware
– If fine glassware is washed in the
dishwasher select the "China &
Crystal" program*. This will reduce
the risk of clouding.
– Plastic items that are not heat
resistant
– Copper, brass, tin or aluminum
Silver and aluminum:
– Dishes with color painted over the
glaze. These dishes may fade over
time
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– Fine glassware and crystal items
should only be washed using the
"China & Crystal" program*.
Otherwise clouding or etching may
occur after frequent washing.
– Cast iron pots and pans
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise,
mustard, fish and marinades.
* depending on model
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
If unsure whether your china and
crystal are dishwasher safe, please
check with the manufacturer. The
China & Crystal program, although
extremely gentle and thorough can
cause the china and crystal to "wear"
if they are not dishwasher safe.
– Clean aluminum items, e.g. grease
filters, with domestic dishwasher
detergent only.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery tray
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders.
^ Arrange the cutlery as shown in the
cutlery tray.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge
down and forks with the prongs
between the holders. Spoons should be
placed in the opposite direction with
the handles between the holders so
that water can run off more easily.
The upper spray arm must not be
blocked by tall cutlery items.
The cutlery tray insert is removable.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Upper basket
Coffee bar
(depending on model)
,Always use the dishwasher with
the upper and lower basket inserted.
Glasses can be leaned against the
coffee bar for a secure stand.
^ Load the upper basket with small,
lightweight, or delicate items such as
cups, saucers, glasses, dessert
bowls and flat pans.
^ The bar can also be used to separate
two rows of glasses.
To stack wide items, flip the bar to the
right.
^ Long items such as soup ladles,
mixing spoons and long knives
should be placed lying down across
the front of the upper basket.
Cup racks
Raise the rack to make room for tall
glasses. Lower it to double stack
smaller pieces.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjusting the upper basket
Depending on the setting of the upper
basket, a variety of plate dimensions
can be accommodated.
The upper basket can be raised or
lowered to accommodate tall items.
For example: If the upper basket is in
its highest position a plate with a
diameter of 12 3/16" (31 cm) can be fit in
the lower basket.
The basket can also be angled to fit tall
items in both, the upper and lower
baskets. The angles should not be set
to opposite extremes. This will block the
middle spray arm. Take care when
sliding the basket in and out in this
position.
^ Slide out the upper basket.
^ Pull up the levers at the sides of the
upper basket and adjust the basket
height.
^ Release the levers and the basket will
lock in place.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Lower basket
Foldable spikes
The foldable spikes can be used for
small plates and saucers.
^ For larger and heavier items such as
plates, serving platters, saucepans,
bowls, etc.
Two rows of spikes can be folded
down, to create more room for larger
dishware, e.g. pots, pans and bowls.
Small plates and saucers can also be
arranged in the lower basket.
^ Press the yellow lever down a and
fold down the spikes b.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Removable spike insert
Removable PlateGuard Plus with
StemGuard
The spike insert can be removed in
order to make room for larger tableware (depending on model)
or to use a different insert.
This insert is ideal for cups, glasses,
plates, bowls, pots and pans.
Removing the insert a
^ To arrange tall items the cup rack
^ To remove the insert, gently pull the
can be raised.
handle upwards.
^ The stemguard can be used to hold
the stems of glassware or coffee cup
handles.
Replacing the insert b
^ Slide the hitches of the insert under
the struts of the lower basket.
^ Push down on the handle to snap the
insert into position.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Vase / Bottle insert
(depending on model)
Removing the insert a:
^ To remove the insert, gently pull the
handle upwards.
The vase / bottle insert can be used to
rinse narrow items, e.g. vases, baby
bottles, etc.
Inserting the insert b:
^ Place the insert into the lower basket.
^ Place the insert into the lower basket
as shown in the illustration. If placed
anywhere else, water will not reach
all surfaces. The item will not be
properly cleaned.
^ Slide the hitches of the insert under
the struts of the lower basket.
^ Push down on the handle to snap the
insert into position.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basket accessories
Additional inserts for the upper and lower baskets may be purchased from your
Miele dealer or Miele. Depending on the model some accessories come standard
with the machine.
Glassware insert GGO
To wash long stemmed glassware
attaches to the upper basket
Multi-function basket GMFO
Cappuccinatore insert GCEO
Tall glassware insert GGU
Large diameter plate insert GTLU 35
To wash saucers, baby bottles and
small items
To wash the parts of the
Cappuccinatore
To wash tall glassware in the lower
basket
To wash large plates with a maximum
diameter of approx. 13 3/4" (35 cm).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Detergent
You can use powder, gel or tab
detergents. Follow the dosage
information on the detergent
packaging.
,Dishwasher detergents contain
irritant and corrosive ingredients.
Avoid inhaling or swallowing
dishwasher detergent.
Detergent tabs are not recommended
for use with the program "Express". The
tabs may not dissolve completely.
Keep children away from detergent.
Fill the detergent dispenser only
when you are ready to start the
dishwasher.
Dishwasher cleaning products are
available from MIele.
,Only use detergents formulated
for domestic dishwashers.
Use only the recommended amount
of detergent. Continued use of too
much detergent may cause machine
damage.
When using the "China & Crystal"
program (depending on model)
reduce the amount of detergent
used to at least ½ of the normal
dosage. Also make certain your
china and crystal are dishwasher
safe.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Adding detergent
^ Use one tab or add powder or gel
detergent to compartment II and
close the flap.
^ To open, press the latch on the
detergent dispenser. The flap will
spring open.
^ If a Pre-rinse is desired, and
available for your chosen program,
add 1 teaspoon (5 ml) of detergent to
compartment I.
The flap is always open at the end of a
program.
The horizontal marks in compartment II
indicate the levels of approximately 1 ¼
and 2 tablespoons (20 and 30 ml)
respectively. Compartment I holds a
maximum of 2 teaspoons (10 ml).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning on
Selecting and starting a
program
^ Open the water supply, if closed.
^ Open the door.
Choose your program according to the
type of load and soiling. See the
^ Make sure the spray arms can rotate
"Program Guide" for more information.
freely.
^ Select the desired program with the
^ Turn the dishwasher on "g".
"Program" button.
The "g" indicator lights up.
The program indicator of the selected
program lights.
^ Start the program by closing the
door.
Cancel a program only in the first
few minutes. Otherwise important
program steps may be interrupted.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
When to use
Program sequence
Pre-
rinse
Main
wash
Interim
rinse
Final
rinse
Drying
1
2
1
2
For normally soiled pots
and pans with dried on
food, also for heavily soiled
dishware, use 120% of
normal detergent amount
Pots &
Pans
x
x
x
x
x
For normally soiled
Normal
x
x
x
x
x
x
x
dishware
For temperature sensitive
glassware and lightly soiled
dishware, use 50 % of
China &
Crystal
x
x
normal detergent amount
Extended wash time,
for sanitizing normally
soiled dishware with
dried on food
SaniWash
Express
x
x
x
x
x
x
x
"Quick program" for lightly
soiled dishware, e.g. party
dishware includes sensor
controlled Glasscare, not
suitable for detergent tabs
x
To rinse dishes when a
complete program is not
needed
Rinse &
Hold
x
detergent is not
recommended
Usage:
Electric: 0.01 - 1.23 kWh
Water:
1.3 - 5.23 gal (5 - 19 l)
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Use
At the end of a program
Interrupting a program
^ Open the door a few inches to see if
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
the program has finished.
The indicator of the selected program
has gone out.
,Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
If the program indicator is still on,
the program is still running. Close
the door again to allow the program
to finish.
Keep the door open slightly. The dishes
will cool much faster.
^ Unload the dishwasher.
Changing a program
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
If the detergent flap is already open,
do not change the program.
If a program has already started and
you wish to change it:
^ Turn the dishwasher off "V".
^ Open the door.
The dishwasher continues to use
electricity until turned off with the
"o" button.
^ Press the "o" button.
^ Press the "g" button.
Preparing your appliance for
an extended vacaion
^ Select the desired program with the
program button.
^ Start the program by closing the
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
door.
enough to reduce the risk of a leak.
To be completely safe, you must
turn off the water supply to each
individual appliance. This means
under the sink for a dishwasher, at
the laundry bib for your washer, etc.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Buzzer
^ Press the "Program" button four
times.
A signal sounds at the end of a
program and when a fault occurs.
The "Intake / Drain" indicator flashes
four times in intervals.
The buzzer at the end of a program
sounds five times in quick succession
for up to one hour.
The setting can be recognized by the
flashing of the "SaniWash" indicator:
The buzzer for a fault sounds
– flashing: buzzer is activated
continuously for up to two minutes.
– not lit up: buzzer is deactivated
The buzzer is activated by default. It
can be turned off, so it does not sound
at the end of a program. The buzzer for
a fault cannot be turned off.
^ To change the setting press the
"Program" button for at least one
second, until the "Intake / Drain"
indicator lights up.
^ Open the door.
^ Press the "Program" button.
The setting is saved.
^ Turn the dishwasher off with "o".
^ Press the "Program" button and at the
same time turn the dishwasher on
with "g".
^ Turn the dishwasher off "o".
^ Hold the program button until the
"Rinse & Hold" program indicator
comes on.
If it does not come on, start over.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Default settings
The setting can be recognized by the
flashing of the "SaniWash" indicator:
All settings can be reset to the factory
default.
– flashing: all settings are factory
default
^ Open the door.
– not lit up: at least one setting was
changed
^ Turn the dishwasher off "o".
^ Press and hold the "Program" button
and at the same time turn the
dishwasher on "g".
^ To change the setting press the
"Program" button for at least one
second, until the "Intake / Drain"
indicator lights up.
Hold the "Program" button until the
"Rinse & Hold" program indicator
comes on.
^ Press the "Program" button.
The setting is saved.
If it does not come on, start over.
^ Press the "Program" button 12 times.
^ Turn the dishwasher off "o".
The "Intake / Drain" indicator flashes
once long and twice short in intervals.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
,Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem
Possible fault
Solution
The program does The door is not properly
Close the door firmly.
not start.
closed.
The machine is not
plugged in.
Insert the plug.
The fuse is defective or
the breaker has tripped.
Reset the circuit breaker.
See data plate for minimum
amperage.
The dishwasher is not
turned on.
Turn the dishwasher on "g" and
select a program.
The dishwasher
stops during a
program.
The fuse has tripped.
Reset the circuit breaker.
See data plate for minimum
amperage.
The buzzer sounds. There may be a technical Turn the dishwasher off "o".
fault.
After a few seconds:
All program
– Turn the dishwasher on.
indicators are
– Select the desired program
flashing fast when
with the program button.
the door is open.
– Close the door.
If the problem persists contact
Technical Service.
The drain pump is The waterproof system
running when the has activated.
door is opened.
– Turn off the water supply.
– Contact Miele Technical
Service.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problems with water Intake / Drain
Problem
Possible fault
Solution
Shortly after the
program start the
dishwasher stops
running.
The water supply – Open the water supply.
is shut off.
The buzzer sounds.
The Intake / Drain
indicator flashes
when the door is
open.
The dishwasher
stops.
Before fixing the fault:
– Turn the dishwasher off "o".
The buzzer sounds.
The "Intake / Drain"
indicator flashes
when the door is
open.
Fault in the water – Open the water supply all the way.
intake.
– Clean the water intake filter, see
"User Maintenance Instructions".
– The water pressure at the water
connection is lower than 4.35 psi.
Consult a plumber.
Fault in the water – Clean the triple filter.
drain.
– Clean the drain pump and the
There may be
non-return valve.
water in the wash
See "User Maintenance Instructions"
cabinet.
for more info on the above.
– Remove any kinks in the drain
hose.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
General problems with the dishwasher
Issue
Possible fault
Solution
The display turns off. The dishwasher has gone
Press any button.
into "Standby" mode to save The display turns on
energy.
again.
Detergent is left in the The dispenser was damp
Dry the dispenser before
dispenser at the end when detergent was added. adding detergent.
of a program.
The detergent lid
cannot be closed
properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
This is not a fault!
The moisture will
interior walls are still It is the normal operating
evaporate after a short
wet after a program
has finished.
mode of the drying system. time.
Water remains in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Turn the dishwasher off
"o".
The triple filter in the wash Clean the triple filter. See
cabinet is clogged.
"User Maintenance
Instructions".
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve, see
maintenance instructions.
The drain hose is kinked.
Remove any kinks from the
drain hose.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Sounds
Issue
Possible fault
Solution
There is a knocking
noise in the wash
cabinet.
The spray arm is hitting an Interrupt the program,
item in the basket. rearrange items blocking
the spray arms.
There is a rattling noise Items are not secure in the Interrupt the program and
in the wash cabinet.
wash cabinet.
rearrange loose pieces.
There is a knocking
noise in the water
pipes.
This may be caused by
the installation or the
diameter of the pipe.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Poor cleaning results
Issue
Possible fault
Solution
The dishes are not The dishes were not loaded See "Loading the
clean.
correctly.
dishwasher".
The program was not
powerful enough.
Select a more intensive
program, see "Program
Guide".
Not enough detergent was
dispensed.
Use more detergent, see
"Adding detergent".
The spray arms are blocked Turn the spray arm and
by items. rearrange the dishes if
necessary.
The triple filter in the base of Clean the filter and insert it
the wash cabinet is not clean correctly.
or not correctly inserted. The Clean the spray arm jets.
spray arm jets might be
clogged.
See "User Maintenance
Instructions".
The drain pump or the
Clean the drain pump and
non-return valve is blocked. the non-return valve, see
Wash water will run back into maintenance instructions.
the wash cabinet.
Glasses and
The rinse aid dosage is set Reduce the dosage, see
cutlery show
streaks. There is a
bluish sheen on
the surface of
glasses and a film
that can be wiped
off.
too high.
"Before using for the first
time".
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
Dishes are still wet,
The rinse aid setting may Increase the dosage, refill
glasses and cutlery are be too low, or the rinse
spotted. aid reservoir is empty.
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
Dishes were taken out too Leave dishes in longer,
soon.
see "Use".
A "Tab" product was
used. These products
Use a normal (powder or
gel) detergent and add
have a low drying effect. rinse aid.
White residue is visible Not enough rinse aid was Increase the dosage, see
on cutlery and dishes.
Clouding occurs on
glassware and film can
be wiped off.
used.
"Before using for the first
time".
A "Tab" product was
used.
Use a normal (gel or
powder) detergent.
The salt container is
empty.
Refill the salt container,
see "Before using for the
first time".
The salt container lid was Reseat it making sure it
not correctly screwed on. screws back on correctly.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Issue
Possible fault
Solution
Glasses are
Detergent deposits.
Use a different detergent.
discolored and the
film cannot be wiped
off.
Clouding or etching
on glasses.
Possible causes may be : See the relevant section of
excessive rinse aid or type this manual to:
and amount of detergent.
– adjust the rinse aid
Any one or a combination
dosage,
of these faults may be to
– change the type and/or
blame.
adjust the amount of
detergent used,
– connect the dishwasher
to a cold water supply.
Glasses are dull and Glasses are not
discolored, film dishwasher safe.
cannot be wiped off.
Tea or lipstick stains The wash temperature of
have not been
completely removed. too low.
The detergent has a low
There is no remedy. Only
wash dishwasher safe
glasses in the dishwasher.
Select the ""SaniWash"
the selected program was program.
Use a different detergent.
bleaching effect.
Plastics are
discolored.
Natural dyes e.g. from
vegetables may be the
cause. Not enough
Use more detergent, see
"Adding detergent".
Discoloration is permanent.
detergent was used to
break down natural dyes.
There are rust stains The affected items are not There is no remedy. Only
on cutlery. corrosion resistant. wash dishwasher safe
cutlery in the dishwasher.
No program was run after Start the "Express" program
refilling salt. Salt residuals without a load after refilling
got in the wash cycle. salt.
The salt container lid was Reseat and screw the lid
not screwed on properly. on firmly.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Comparison Tests
10 place settings, Standard program: Normal
Upper basket
Lower basket
Cutlery tray
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Comparison Tests
16 place settings, Standard program: Normal
Upper basket
Lower basket
Cutlery tray
40
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
Repairs
MieleCare
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
(USA only)
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
^ Please quote the model type and
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
number of your appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles a service technician will be able
to input these into your machine
controls via the indicator light marked
PC. Miele will provide information when
such possibilities become available.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Transport
To transport the dishwasher, e.g. when
moving to a new home, note the
following:
– Empty the dishwasher.
– Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
– Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
User Maintenance Instructions
To prevent accidents
and appliance damage,
read these instructions
before
installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Exterior
Check and clean your dishwasher
regularly. This will help avoid faults
and problems.
^ Only use a conditioner suitable for
your kitchen cabinetry.
^ Clean wood with a damp cloth and
wipe dry.
,Abrasive cleaning agents,
all-purpose cleaners, thinner or
ammonium cleaners should not be
used on the dishwasher.
Clean the exterior with a solution of
warm water and liquid soap applied
with a soft sponge. Dry with a soft
cloth.
They will damage the surface.
Wash cabinet
Glass cleaners may be used to
clean the exterior. However do not
allow them to sir or puddle, this can
cause damage to the surface.
Remove the cleaner promptly.
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as "Dis
Cleaner" available from your Miele
To prevent damage to your appliance
avoid the following:
– cleaners containing soda, ammonia,
thinners, or chlorides
Door and the door seal
^ Wipe the door seals regularly with a
– cleaners containing descaling
agents or lime removers,
damp cloth to remove food deposits.
^ Food residue and spilled liquids
should be wiped from the sides of the
dishwasher door. These are outside of
the wash cabinet and are not cleaned
by water from the spray arms.
– abrasive cleaners,
– stainless steel cleaners,
– dishwasher soap (powder),
– caustic (oven) cleaners,
– scouring pads, steel wool, hard
brushes,
Control panel
^ The plastic control panels should
only be wiped with a damp cloth or
suitable cleaning agent designed for
use on plastic.
– metal scrapers.
,The appliance and front controls
are not scratch proof.
Remove spills immediately.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones). During normal use, the
filter system is self-cleaning.
,The machine must not be used
without all the filters in place!
^ Check and clean the filter system
periodically for any trapped or
foreign objects.
^ Turn the handle counterclockwise to
release the triple filter system a.
The level of soiling and time it takes
before the filters need cleaning will vary
depending on your household usage.
^ Lift the filter combination out of the
machine b. Remove any solid
particles and rinse under running
water. Scrub with a nylon brush if
necessary.
^ Turn off the dishwasher before
cleaning.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
To clean the inside of the filter, the flap
must be opened.
^ Return the filter so it lies flat in the
base of the wash cabinet.
^ Push the clips together a and open
the flap b.
^ Lock the filter by turning the handle
clockwise.
^ Rinse under running water.
,The triple filter system must be
inserted and locked into place.
Large particles could get in the
circulation system and cause a
blockage.
^ Close the flap so that the clip
engages.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before
cleaning.
Removing the spray arms
^ Remove the cutlery tray (if present).
^ Push the upper spray arm up to
engage the inner ratchet and
unscrew the spray arm.
^ Pull the lower spray arm firmly
upwards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a
toothpick to push food particles into
the spray arm jets.
^ Remove the lower basket.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check that
they rotate freely.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the water inlet filter
A filter is incorporated into the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
,The plastic housing of the water
connection contains electrical
wiring.
Do not cut the intake hose or
submerge it in liquid.
^ Carefully remove the rubber seal.
Installing an in-line water filter
^ Remove the filter using needle nose
pliers and rinse it under running
water.
If your water contains a large number of
insoluble substances, a filter between
the water valve and the intake hose
connection is recommended. These
filters can be purchased from Miele.
^ Reinsert the filter and seal. Make sure
they are seated correctly.
^ Screw the intake hose back on the
water valve, checking that it is not
cross-threaded.
Cleaning the filter
^ Turn off the dishwasher and pull the
plug.
^ Slowly turn on the water supply and
^ Turn off the water supply.
test for leaks.
^ Unscrew the intake hose.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher and pull the
plug.
^ Remove the triple filter (see "Triple
filter system").
^ Use a cup or bowl to scoop water out
of the wash cabinet.
The drain pump is beneath the
non-return valve (see arrow).
^ Remove all foreign objects from the
drain pump (glass or bone splinters).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully reinsert the non-return valve
and secure it with the locking clamp.
,Make sure the locking clamp
clicks into place!
^ Tilt the locking clamp to the side a.
^ Pull out the non-return valve b and
rinse it under running water.
^ Remove all foreign objects from the
non-return valve.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
Please refer to the Installation Diagram supplied with these instructions.
To comply with IEC sound testing protocols, please contact Miele for additional
instructions.
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
,Installation, repairs and other
work by unqualified persons could
be dangerous.
,Improper connection of the
equipment grounding conductor
can result in electric shock. Do
not modify the plug provided with
the appliance; if it will not fit the
outlet, have a proper outlet
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household mains
supply.
installed by a qualified electrician.
If there is any question
concerning the proper electrical
connection or grounding of this
appliance to the power supply,
please consult a licensed
The power outlet must be accessible
after installation. Do not use an
extension cord to connect the
dishwasher to the mains. Danger of
overheating! See data plate on the
right side of the door.
electrician or call Miele’s
Technical Service Department:
U 1-800-999-1360
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele service technician.
V 1-800-565-6435
Specifications
The dishwasher comes equipped with a
4 ft (1.2 m) power cord with a molded
plug for connection to 120 V, 60 Hz,
15 A grounded receptacle.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
In the event of a malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for the electrical
current. This appliance is equipped
with a cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is installed and
grounded in accordance with all local
codes and ordinances.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Waterproof system
,To prevent damage to the
All Miele dishwashers have a safety
valve located on the incoming water
line and a sealed underside with a
water sensor. If a fault occurs, the water
intake is stopped and the drain pump is
activated.
dishwasher, it must only be
connected to a fully vented drainage
system.
Connection to the water
supply
,Do not drink water from the
dishwasher!
– The dishwasher can heat its own
water to the temperature required by
the wash program. This allows for
connection of the machine to either a
hot or cold water source. For lowest
energy consumption connect the
dishwasher to a cold water source.
For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source. All programs use hot
water in the rinse cycles.
,Do not cut the intake hose. It
contains electrical wiring. If the hose
is cut, the dishwasher will not work.
There will be a water leak and you
could be injured. If the hose is too
long, coil it neatly and place it
behind the machine.
– The inlet hose is approximately 5 ft.
(1.5m) long.
– A 5 ft. (1.5m) drain extension is
available from Miele.
– The water inlet hose comes
equipped with a 3/4" female hose
thread connector. This can be
directly connected to a water supply
with 3/4" MHT (male hose thread
ends).
– Water pressure: Must be between
4.5 - 145 psi (0.3 - 10 bar).
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Drainage
Venting the drainage system
– The machine comes equipped with a If the dishwasher drain hose is
built-in non-return valve on the
discharge side to prevent waste
water from flowing back into the
dishwasher.
connected to a floor drain or to a drain
pipe that is less than 8" (20 cm) above
the floor, the drain must be vented.
Otherwise the water inside the
dishwasher may siphon out during the
wash program.
– The dishwasher is equipped with a
5 ft (1.5 m) flexible drain hose with an
internal diameter of 7/8" (22 mm).
^ Open the dishwasher door and
remove the lower basket.
– Drain hose extensions and adapters
can be ordered from Miele.
The maximum drain hose length is
13 ft. (4 m), max. drain height: 39"
(1 m).
^ Pull the lower spray arm firmly
upwards to remove.
– If the hose is to be directly fitted to
the drainage outlet on site, use the
supplied hose clip (see assembly
plan).
– The hose can be installed to the left
or right side.
– The existing drain pipe for the drain
hose is designed for various hose
diameters. The drain pipe must be
shortened if the drain pipe extends
too far into the drain hose. The drain
hose could get clogged.
^ Cut off the vent cap located at the
right rear of the triple filter system, as
illustrated.
– The drain hose must not be
shortened.
,Make sure the hose is installed
without kinking, pressure or being
pulled.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 1711
G2183
M.-Nr. 07 724 150 / 04
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|