Operating and Installation
Instructions
Commercial Dishwasher
G 7856
en - US
To prevent accidents
and machine damage
read these instructions
before
installation or use.
M.-Nr. 06 868 521
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Description of the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Opening and closing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Filling the salt reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Salt indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Adding rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting the dosage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Loading the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Items not suitable for dishwashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Adjusting the upper basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Adding cleaning agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Turning on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Starting a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Selecting an additional function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Program sequence display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
At the end of a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Turning off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Changing a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Canceling a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Program guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Programming special functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Machine care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Correcting minor faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
INSTALLATION INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING -
The installation of this unit in
~
non-stationary locations (e.g. ships)
When using your dishwasher
follow basic precautions,
including the following:
must be performed by a qualified
installer or service agency, in strict
accordance with national and local
safety regulations and standards.
This dishwasher is only intended for
specialized applications. Only use
the machine for its intended
Before installation, make sure that
~
the voltage and frequency listed on the
data plate correspond with the
purpose. Any other use, conversion
or modification is dangerous. The
manufacturer cannot be held
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
responsible for damages caused by
improper use of this machine.
Be certain this machine is properly
~
This dishwasher complies with
current safety requirements.
Improper use of the machine can
lead to personal injury and material
damage.
installed and grounded by an
authorized technician. To guarantee the
electrical safety of this machine,
continuity must exist between the
machine and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system
checked by a qualified technician. The
manufacturer cannot be held
Read all instructions before installing
or using this machine.
Keep these operating instructions in
a safe place and pass them on to
any future user.
responsible for damage or injury, such
as electric shock, caused by missing or
defective grounding.
Installation and service
Do not install or use a damaged
~
Installation and repair work should
dishwasher. A damaged machine is
dangerous. Unplug the machine and
call your Miele dealer or the Miele
Technical Service Department.
~
be performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.
Do not use the machine until
~
properly installed.
Do not install the machine in an area
~
where a danger of explosion or of
freezing temperatures may be present.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
If the power cord is damaged it
Use
~
must only be replaced by a Miele
Please follow the advice on
~
Service technician with a genuine Miele
power cord.
installation in this manual and in the
separate Installation Instructions.
Do not use an extension cord to
~
Personnel operating the machine
~
connect this machine to electricity.
Extension cords do not guarantee the
required safety of the machine (e.g.
danger of overheating).
should be trained regularly.
Persons who lack physical, sensory
~
or mental abilities, or experience with
the machine should not use it without
supervision or instruction by a
responsible person.
Defective components should be
~
replaced by Miele original parts only.
Only with these parts does the
manufacturer guarantee that they
comply with safety requirements.
Do not allow children to play in or
~
around the dishwasher, or to operate it.
Before installation or service,
Do not tamper with the controls.
~
~
~
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
BURN AND SCALD HAZARD
This dishwasher reaches very high
temperatures. Take care when
unloading the unit. Let baskets and
inserts cool before touching them. Any
water which may remain in containers
will be very hot and should be emptied
into the wash cabinet.
When work has been performed on
~
the supply plumbing, the supply line to
the commercial dishwasher must be
bled.
Otherwise, the water softening system
may be damaged.
BURN HAZARD
~
The heating elements become
extremely hot during use. Do not touch
the heating elements during or directly
after the end of a program.
Take care when handling liquids
~
such as detergent, rinsing, wetting, or
neutralizing agents. These may contain
irritant or caustic ingredients. Do not
use any organic solvents. Danger of
explosion!
Follow the instructions and relevant
safety procedures carefully. Wear
protective gloves and goggles. The
manufacturer’s safety conditions must
be observed with all chemical agents.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Under certain conditions, hydrogen
Use only rinse agents for
~
~
gas may be produced in a hot water
system that has not been used for two
weeks or more. HYDROGEN GAS IS
commercial dishwashers. When other
rinse agents are used, there is the
danger that the rinse load and the
EXPLOSIVE. If the hot water system has dishwasher might be damaged.
not been used for such a period, turn
Pre-treatments with detergents can
~
on all hot water faucets and let water
create suds, as can certain rinsing
flow from each for several minutes
agents. For pre-treatment and / or
before using the dishwasher. This will
cleaning only, use low-sudsing
release any accumulated hydrogen
detergents which have been approved
gas. Do not smoke or use an open
by Miele. Suds can have an adverse
flame during this time.
effect on the cleaning process.
Avoid inhaling detergent. If
~
When a chemical additive is
~
swallowed, it can cause burning in the
recommended on technical application
mouth and throat or inhibit breathing.
grounds (e.g. with a detergent), this
Be careful when sorting and loading does not imply that the manufacturer of
~
items to be washed: locate sharp items the dishwasher takes responsibility for
so that they are not likely to damage the the affect of the chemical on the
door seal; and load sharp knives with
the handles up to reduce the risk of
injuries.
material of the items being cleaned.
Please be aware that changes in
formulation, storage conditions, etc.,
which may not be publicized by the
chemical producer, can have a
The water in the machine must not
~
be used as drinking water.
negative effect on the cleaning result.
Do not sit or lean on the open door.
~
Always follow the instructions of the
~
This could cause the machine to tip or
be damaged.
chemical manufacturer when using
detergents and special application
chemicals. Only use such chemicals for
the purpose and in the situation
specified to avoid such dangers as
chemical reactions and material
damage.
Never clean the machine or near its
~
vicinity with a water or high pressure
hose.
Only use cleaning agents
~
formulated for special processes and
approved by Miele for use with this
machine. Keep all cleaning agents out
of the reach of children. Use of
unsuitable cleaning agents could
adversely affect the
The dishwasher is designed only for
~
operation with water and additive
cleaning agents. Organic solvents must
not be used in the machine. An
explosion or machine corrosion could
occur with the use of organic solvents.
components of the machine.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
In critical applications where very
Disposal of the old machine
~
stringent requirements must be met, it
When disposing of your old
~
is highly recommended that all relevant
factors for the process, such as
cleaning agent, quality of water, etc.,
be discussed with a Miele Application
Specialist.
dishwasher first make it unusable.
Disconnect it from the mains power
supply, cut off the cable and plug from
the cable.
For environmental and safety
~
The special inserts should only be
~
reasons ensure the machine is
completely drained of any residual
water and detergent. (Observe safety
regulations and wear safety goggles
and gloves).
used for their specific application.
Do not wash plastic items unless
~
they are marked "dishwasher safe" or
the equivalent. If in doubt follow the
manufacturers recommendations.
Remove the door to the washing
~
Empty any containers or utensils
compartment, so that children cannot
accidentally shut themselves in. Make
appropriate arrangements for the safe
and environmentally responsible
disposal of the machine.
~
before arranging them in the machine.
Do not allow any remains of acids or
~
solvents, particularly hydrochloric acid
or chloride solutions, to get into the
wash cabinet. The presence of any
solvents should be minimized
For tank system machines ensure
~
that all water is emptied out the tank.
(especially those in hazard class A1).
To avoid corrosion damage ensure
~
The manufacturer cannot be held
responsible for any damage caused
by non-observance of these
that solutions or steam containing
hydrochloric acid do not come into
contact with the steel outer casing of
the machine.
Important Safety Instructions.
Accessories
SAVE THESE
INSTRUCTIONS
Only specific additional equipment,
~
made by Miele or approved by Miele,
should be connected to this machine.
Consult Miele on the type and
application of such equipment.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the machine
a Connection for DOS unit G 60
Dosage pump for liquid detergents -
optional
d Compartment for powder detergent
e Rinse aid reservoir
(with dosage selector)
(located on the rear side of the
machine)
b Filter combination
c Salt reservoir
(water softener)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the machine
aOn/Off button (I-0)
bDoor button
cDisplay
jSerial interface
(for use by Service Technicians)
kAdd liquid cleaning agent indicator
(only applies to machines equipped
with an optional external DOS
module)
dDelay Start indicator
(see "Programming special
functions")
lAdd rinse aid indicator
mAdd salt indicator
eExtra drying indicator
fStart indicator
nCheck water inlet/drain indicator
oProgram sequence indicator
pProgram selector
gStart button
hExtra drying button
iDisplay button to toggle between
"Actual time" and "Elapsed wash
time"
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the machine
This Miele machine is a commercial
dishwasher with fresh water wash
system and short batch times. It is
especially suitable for use where quick
turn-around flexible wash programs,
and commercial durability are of the
utmost importance.
The dishwasher is equipped with a
water softener as a standard.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Opening and closing the door
To open the door
To close the door
^ Press the door button, hold the door
grip and pull open the door at the
same time.
^ Lift the door upwards and push until
it clicks shut. Do not press the door
button while shutting the door.
The door should only be opened during
operation for emergencies, e.g. if items
are knocking together or if a program
fault is indicated in the display. See
"Canceling a program".
,Do not touch the heating
elements during or directly after the
end of a program, you could burn
yourself. They remain hot for some
time after the end of the program.
When using the "Rapid" program the
door must be kept closed between
loads. The condensed water which
builds up in the machine could cause
corrosion or damage to surrounding
countertops or furniture. See advice on
installation locations in the "Installation"
section of this manual.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Water softener
Water Softener
Setting the water softener
^ Turn the machine off.
To avoid the build-up of calcium
deposits on items being cleaned and in
the machine the water needs to be
softened.
^ Turn the program selector to "STOP".
^ Press and hold the "Display" and
"Start" buttons, and turn on the
machine with the "On / Off" button.
The actual program status "P..." is
displayed.
To ensure a steady supply of soft water
the water softener unit must always be:
1. correctly set for the water hardness
level in your area.
The "Fill/Drain" indicator lights.
2. the salt reservoir must be filled.
(If the water hardness level is below
4 gr/gal (4 °d - German scale) the
water does not need to be softened.)
^ Press the "Extra Drying" button once.
"E01" (program level 1) appears in
the display.
^ Turn the program selector to the
6 o’clock position.
The machine is set at the factory for a
water hardness level of 19 gr/gal
(19°d).
The number "19" is displayed (the
factory water hardness setting in °d,
equivalent to 19 gr/gal).
If the water supply is harder or softer
than this (including below 4 gr/gal or
4 °d) the factory setting will need to
be changed. For settings see chart.
^ Press and hold the "Display" button
until the required value (water
hardness in °d) is displayed.
The counter returns to "0" after
reaching "60".
Your local water authority will advise
you of the water hardness in your area.
^ Press the "Start" button. "SP" appears.
For fluctuating levels (e.g. 8 - 17 gr/gal
or 8 - 17 °d) set the water softener to
the highest setting (in this example to
17 gr/gal or 17°d).
^ Press the "Start" button once more.
The setting will now be stored. The
display clears.
The machine is now ready for
operation.
The built-in water softener has settings
from 1 - 62 gr/gal or 1 °d - 60 °d.
^ Enter your water hardness level here:
°d / gr/gal
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Water softener
Table of settings
°d
°d
(German
scale)
gr/gal
Setting
(German
scale)
gr/gal
Setting
1
2
1
1
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
47
49
50
51
52
53
54
55
56
57
58
59
60
61
62
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
2
2
3
3
3
4
4
4
5
5
5
6
6
6
7
7
7
8
8
8
9
9
9
10
11
12
13
14
15
16
17
18
19 *)
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
10
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
*) factory setting
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Water softener
Filling the salt reservoir
Only special, coarse-grained
reactivation salt* should be used in
this machine.
*Available from Miele. Please see
back page for contact information.
Do not use other types of salt, e.g. table
salt, agricultural or gritting salt. These
could contain components which are
insoluble in water and could damage
the water softener. If in doubt, consult
Miele’s Professional Department.
^ Carefully fill the reservoir with salt.
Displaced water will run out as it is
being filled.
The salt reservoir holds approximately
5.5 lbs (2.5 kg) of salt.
^ Wipe any residual salt off the screw
threads.
,Inadvertently filling the salt
reservoir with detergent will damage
the water softener.
^ Screw the cap on firmly.
^ Immediately after this step: Run the
"Rinse" program to remove any traces
of salt from the cabinet.
Before filling, make sure you are
using reactivation salt.
Note: There may be a delay before the
"Rinse" program starts due to the
reactivation of the water softener.
^ Remove the bottom basket from the
machine.
^ Unscrew the salt reservoir cap.
Important: The salt container must
be filled with 0.6 gal (2.5 l) of water
before adding salt for the first
time. Water does not have to be
added with subsequent refills.
^ Place the funnel (provided) in place.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Water softener
Salt indicator
When the salt reservoir is empty the
"Recharge" indicator, b, lights as a
reminder to fill the reservoir.
Reactivation takes place automatically
during a program. The "Recharging"
indicator, a, lights while this is
occurring.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Rinse aid is needed to prevent spotting Adding rinse aid
on dishes and glassware.
The rinse aid is filled in the reservoir
and the set amount will be
automatically dispensed during the final
rinse. The reservoir holds about 125 ml.
,Inadvertently filling the rinse aid
reservoir with detergent (liquid or
powder detergent) will damage the
reservoir!
Only use rinse aid approved for
this dishwasher.
If the "Rinse aid" indicator lights, the
rinse aid reservoir must be refilled.
^ Open the door fully.
^ Press the button in the direction of
the arrow until the flap springs open.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Setting the dosage
^ Add rinse aid until it is visible on the
surface of the filter in the opening.
The dosage selector (see arrow) is
preset to 3. This dispenses
^ Close the flap until it clicks into place.
Make sure it is firmly shut, otherwise
water could get into the rinse aid
reservoir during the program.
approximately 3 ml of rinse aid per
program. It can be adjusted from 1 to 6.
^ Use a higher setting if spots appear
on dry glassware.
^ Clean up any spilled rinse aid to
prevent over-foaming during the next
program.
^ Use a lower setting if streaking
appears on dishes or glasses.
The flap should always remain closed.
Only open it to add more rinse aid.
^ Only add rinse aid when the rinse aid
indicator comes on.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the machine
Loading the machine
Notes
^ Load items so that water will come
into contact with all surfaces. This
ensures that they will be properly
cleaned.
Preparation
^ Empty all containers before loading
them into the machine.
^ Do not place items to be cleaned
inside other pieces where they may
be concealed.
,Ensure that no acid or solvent
residues, especially hydrochloric
acid or chlorides get into the wash
cabinet.
^ Hollow vessels such as cups,
glasses, pots, etc. should be inverted
and placed in the correct inserts.
^ Deep based items should be placed
at an angle to ensure that water runs
off them freely.
^ Tall, narrow, hollow pieces should be
placed in the center of the basket to
ensure good water coverage.
^ Small pieces should be placed on
the cup racks in the upper basket.
Do not obscure them by larger items
below. Cups should be on the lower
rack and bowls on the top rack so
that water reaches all pieces.
^ The spray arms must not be blocked
by items which are too tall or which
hang down in their path. Check if
they rotate freely.
^ Do not place tall items in the front
right area of the lower basket. They
could prevent the detergent
compartment flap from opening.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the machine
Items not suitable for
dishwashers
Please note
^ Silver and aluminum items may
slightly discolor.
^ Cutlery with wooden or horn handles
^ Colors painted over a glaze may fade
after a number of washes.
^ Wooden or plastic cutting boards
^ Glued items, e.g. old knives with
handles which have been glued on
^ Clouding may occur on glasses after
frequent washing.
^ Hand-made craft items
Our recommendations
^ Copper or tin items
^ Wash delicate glassware by hand.
^ Plastic items which are not heat
resistant
^ Only wash dishwasher safe
glassware, dishes and cutlery.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the machine
Upper basket
Loading examples
^ Ideal for small, lightweight, delicate
items such as cups, saucers,
glasses, dessert bowls, etc. as well
as lightweight heat resistant plastic
items.
Bottom basket
^ Ideal for larger and heavier items
such as plates, serving platters,
saucepans, bowls, etc. Glasses may
only be cleaned in the bottom basket
if it is fitted with a special glassware
insert or if there is a special bottom
basket.
O 881 Upper basket:
for 20 cups, 24 saucers or 12 dessert
plates
Cutlery
^ Unsorted cutlery should be placed in
the cutlery holders with the handles
facing downwards.
Select baskets and inserts which are
appropriate for the application.
U 880 Bottom basket:
with 2 x E 216 half inserts each for
15 plates Ø 9 ½" (240 mm) and
2 x E 165 cutlery baskets for mixed
cutlery
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the machine
Adjusting the upper basket
To adjust the upper basket
The upper basket can be adjusted
above and below the middle position
by 1" (2.5 cm). It is set in the middle
position on delivery.
^ Pull the upper basket out until
resistance is felt, lift from the runners
and remove.
^ Unscrew the knurled nuts (roller
bearings) on both sides of the basket
with a suitable wrench and reposition
as required.
Depending on the position of the upper
basket, a variety of plate dimensions
can be accommodated in the baskets.
For example: If the upper basket is in
its highest position, a plate with a
diameter of 9 ½" (24 cm) can be fit in
the lower basket.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding cleaning agent
,Only use cleaning agents
formulated for this machine.
Do not use detergents formulated
for domestic dishwashers.
Powder cleaning agent is dispensed
via the compartment for powder
cleaning agents in the door.
Liquid cleaning agents are dispensed
via the DOS-Module (available as an
optional accessory).
If liquid cleaning agent is not being
used, powder detergent must be
placed in the detergent container prior
to every program (with the exception of
"Rapid" and "Rinse"). See the "Program
guide" for more information.
^ Add powder cleaning agent to
compartment II.
Dosage: approx. 3 g/l, it is equivalent
to 1 ½ tablespoons (20 g) per program
cycle.
In the program cycle "Wash" the water
intake is approx. 7 l.
Follow manufacturer's instructions if
they differ.
^ Close the dispenser lid.
^ Press the opening catch in the
direction of the arrow. The flap will
spring open. The flap is always open
at the end of a program.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding cleaning agent
"Rapid" program
Maintenance of the dispensing
systems
The following maintenance should be
carried out by a Miele Service
Technician to ensure trouble-free
operation.
Every 12-18 months:
^ Replace the dispensing hoses in the
DOS module.
,CAUTION when handling liquid
agents and additives! They may
contain irritant or caustic
ingredients.
^ If liquid cleaning agent is not being
used, add powder detergent directly
to the inside of the door for this
program.
Please follow the manufacturer's
safety instructions.
A different combination of cleaning
agents and other additives may be
necessary for special soiling. Contact
Miele fore more information.
Wear protective gloves and
goggles.
Note
This machine can be equipped with a
dispenser pump for liquid cleaning
agent (DOS-Module G 60) as an
optional accessory. This is connected
externally.
To vent the dosage system and set the
dosage concentration see,
"Programming special functions".
The DOS module comes with a
separate Installation Manual.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Once the program has started all other
programs are blocked. If the program
selector is turned to another program
during the running program, the values
shown in the display will go out. The
values appear again if the program
selector is turned back to the running
program.
Turning on
^ Close the door.
^ Open the water supply (if closed).
^ Press the On / Off (I-0) button.
If the program selector is turned to
"Stop" a dot lights in the display.
^ Press the "Display" button to alternate
between the elapsed time and actual
temperature in the display during the
program.
Starting a program
^ Turn the program selector clockwise
or counterclockwise to the required
program. See the "Program guide" for
information on the programs.
Note: during the heating stage in "Main
wash" and "Final rinse" the required end
temperature is shown in the "time run"
display field.
The display shows the first wash
temperature of the selected program
(except "Rinse" and "Drain"). The "Start"
indicator flashes.
^ If required select the additional
feature "Extra Drying" . See "Selecting
an additional feature".
^ Press the "Start" button. The running
time is displayed in ascending
minutes.
The "Start" indicator lights.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Selecting an additional
function
At the end of a program
At the end of a program the program
sequence indicators and the "Start"
indicator go out. The display shows "0"
and a buzzer sounds for 30 seconds
(factory setting). The buzzer can be
changed (see "Programming special
functions").
"Extra drying" can be selected as an
additional function.
^ Select the drying function directly
after a program has been selected
(not with "Rapid", "Rinse" and "Drain").
Drying is phased over 10 minutes. The
total running time of the program
lengthens accordingly.
^ If desired use the "Display" button to
see the total running time of a
program or the actual temperature.
Program sequence display
To turn the buzzer off
The indicator for the active program
^ Turn the program selector to "STOP".
sequence lights up during the program.
or
Recharging
Pre-wash
^ Open the door.
Turning off
Wash
^ Press and release the "On / Off"
button.
Rinse
Dry (optional function)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Changing a program
Canceling a program
If the "Start" button has not yet been
pressed, the selected program can be
changed.
Once a program is running it should
only be canceled in extreme cases,
e.g. when items in the machine are
moving and need to be arranged
securely.
^ Turn the program selector to the
desired program.
^ Turn the program selector to "Stop".
The program is canceled after
2 seconds.
^ If required select the additional
function "Extra Drying" again. See
"Selecting an additional function".
^ Open the door.
^ Press the "Start" button.
,Caution! Water and items in the
machine may be hot. Danger of
burning or scalding!
^ Rearrange the items securely.
Observe appropriate health and
safety regulations - wear protective
gloves when necessary.
^ Replenish powder detergent if
necessary.
^ Close the door.
^ Select the "Drain" program. The
waste water is drained.
^ Select and start the program again.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
When to use
Program cycle
Pre- Main
Interim
rinse
Final Drying
rinse (Option.
1)
wash wash
1)
funct.)
3)
1
2
3
1
2
For temperature sensitive glassware
and lightly soiled dishware.
CHINA +
CRYSTAL
120°F
X
X
X (X)
X
(X)
Run-time: ~ 12 minutes*
(plus 10 minutes for optional drying)
RAPID
130°F
(X)2)
X **)
Rapid program for continuously used
dishes.**)
Powder detergent: Place detergent
directly on the right hand side of the
door interior, NOT in the detergent cup.
Run-time: ~ 10 minutes*
Quick program for lightly soiled
dishware, e.g. party dishware or to
remove salt traces from the wash
cabinet after refilling salt.
SHORT
130°F
X
(X)
X
(X)
Run-time: ~ 15 minutes*
(plus 10 minutes for optional drying)
Powder detergent dosage: 1 ½ tablespoons (20 grams) in the detergent
dispenser. Follow manufacturers instructions if they differ.
*) Run times dependent on incoming water pressure and temperatures
**) Important information for the "Rapid" program
At the end of the program, the final rinse water is not drained away. It is used for
the following "Rapid" program as wash water. If the operation is interrupted for a
longer time or another program is desired:
^ Select the program "DRAIN". The final rinse water is drained away.
X = Sections included in the program (with temperature/temperature holding time)
1) Temperature or temperature holding time adjustment
(see "Programming special functions").
Important: To clean dishes with soiling it is recommended to program a
wash temperature of 140°F (60°C).
2) To select an economy interim rinse see "Programming special functions".
3) To select a second interim rinse see "Programming special functions".
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Program guide
Program
When to use
Program cycle
Pre- Main
wash wash
1)
Interim
rinse
Final Drying
rinse (Option.
1)
funct.)
3)
1
2
3
1
2
For normally soiled items.
NORMAL
130°F
X
X
X
X (X)
X (X)
X
X
(X)
(X)
Run-time: ~ 24 minutes*
(plus 10 minutes for optional drying)
For normally soiled items. Higher wash
temperature to remove starchy foods.
Run-time: ~ 25 minutes*
NORMAL
PLUS
X
140°F
(plus 10 minutes for optional drying)
For heavily soiled items. Most of the
soiling is removed in an intensive cold
water pre-rinse.
INTENSIVE
150°F
X X
X
X (X)
X
(X)
Run-time: ~ 30 minutes*
(plus 10 minutes for optional drying)
To rinse heavily soiled items (e.g. for
removing soiling or to prevent soiling
from drying onto dishes when a full
program does not need to be run).
RINSE
DRAIN
X
To drain waste water, e.g. when a
program has been interrupted (to
interrupt a program, the program selector
must be in the “STOP” position).
Powder detergent dosage: 1 ½ tablespoons (20 grams) in the detergent
dispenser. Follow manufacturers instructions if they differ.
*) Run times dependent on incoming water pressure and temperatures
X = Sections included in the program (with temperature/temperature holding time)
1) Temperature or temperature holding time adjustment
(see "Programming special functions").
Important: To clean dishes with soiling it is recommended to program a
wash temperature of 140°F (60°C).
2) To select an economy interim rinse see "Programming special functions".
3) To select a second interim rinse see "Programming special functions".
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming special functions
2. Selecting a second interim rinse
Every change of the factory setting
should be documented in case of
possible technical service.
A second interim rinse "Interim rinse II"
can be programmed to improve interim
rinsing in all programs (except for
"Rinse" and "Rapid").
Record any changes in the field
"Adjusted value___________".
^ Turn the program selector to "STOP".
1. Setting the cold water inlet from:
^ Turn the machine off.
"Nominal water intake" to "Nominal
water intake + 1 l".
^ Press and hold the "Display" and
"Start" buttons, at the same time turn
the machine on with the "On / Off"
button.
The amount of water taken into the
machine at each intake can be
increased by 1 liter to a maximum of
9.5 liters.
The display shows the current
program status "P...".
^ Turn the program selector to "STOP".
The "Fill/Drain" indicator lights.
^ Turn the machine off.
^ Press the "Extra Drying" button once.
"E01" (programming level 1) is
displayed.
^ Press and hold the "Display" and "Start"
buttons, at the same time turn the
machine on with the "On / Off button".
The displays shows the current
program status "P...".
^ Turn the program selector to "Rapid".
"30" or "31" is displayed.
"30" = without interim rinse II
"31" = with interim rinse II.
The "Fill/Drain" indicator lights.
^ Press the "Extra Drying" button once.
"E01" (programming level 1) is
displayed.
^ Press "Display" to change from "30" to
"31" or vice versa.
^ Press the "Start" button. "SP" is
displayed.
^ Turn the program selector to "China &
Crystal".
^ Press the "Start" button again. The
change has been saved.
Either "10" or "11" is displayed.
"10" = Nominal water intake
"11" = Nominal water intake + 1 liter
Value set:
^ Press "Display" to change from "10" to
"11" or vice versa.
^ Press the "Start" button. "SP" is
displayed.
^ Press the "Start" button again. The
change has been saved.
Value set:
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming special functions
3. Selecting an economy interim
rinse (only for "Rapid" program)
4. Venting and setting the dosage on
"DOS modules G 60 and C 60"
(optional extra)
^ Turn the program selector to "STOP".
^ Set the dosage selector on the
DOS-Module to the "10" position (on
DOS Module C 60 only).
^ Turn the machine off.
^ Press and hold the "Display" and
"Start" buttons, at the same time turn
the machine on with the "On / Off"
button.
^ Turn the program selector to "STOP".
^ Turn the machine off.
The display shows the current
program status "P...".
^ Press and hold the "Display" and
"Start" buttons, at the same time turn
the machine on with the "On / Off"
button.
The "Fill/Drain" indicator lights.
^ Press the "Extra Drying" button once.
"E01" (programming level 1) is
displayed.
The display shows the current
program status "P...".
The "Fill/Drain" indicator lights.
^ Turn the program selector to "Rinse".
"40" or "41" is displayed.
^ Press "Extra Drying" twice. "E02"
(programming level 2) is displayed.
"40" = without economy interim rinse
"41" = with economy interim rinse
Venting the dispensing system:
^ Press "Display" to change from "40" to
"41" or vice versa.
^ Turn the program selector to "Rinse".
"do1" is displayed.
^ Press the "Start" button. "SP" is
displayed.
^ Press "Display" for 90 secs.
The dosage system is vented.
^ Press the "Start" button again. The
change has been saved.
If only venting is required:
^ Turn the machine off with On / Off
(I-0) button.
Value set:
Immediately: Start the "Rinse" program,
so that after venting any agents in the
wash cabinet are diluted before being
drained away.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming special functions
Setting the dosage
Having changed a value or all values:
^ Press the "Start" button. "SP" is
displayed.
Set the dispensing amount according
to the detergent manufacturer's
recommendations and the
applications.
^ Press the "Start" button again. The
change has been saved.
The machine needs 7 liters of water in
the program cycle "Main wash".
Value set:
If the dispensing system was also
Example:
vented:
The detergent manufacturer
recommends 4 ml of detergent per liter
water.
^ Start the "Rinse" program, so that
after venting any agents in the wash
cabinet are diluted before being
drained away.
7 l x 4 ml/l = 28 ml.
2 ml per 1 sec dispensing time;
i.e. programming to 14 secs.
^ Turn the program selector to "Short"
the dispensing time in seconds is
displayed, e.g "10".
^ Press and hold "Display" until "14" is
displayed (dispensing time 14 secs
per 28 ml, see example above).
The dosage time / dosage amount is
set.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming special functions
5. Altering the cleaning temperature
and/or the temperature holding time
in the "Main Wash" and "Final
^ Temperature "Main wash":
Press "Extra Drying" three times.
"E03" (programming level 3) is
displayed.
rinse"stage of the program cycle
^ Turn the program selector to the
program to be changed. The current
value is displayed after °F.
Any changes to the wash
temperature and/or the temperature
holding time should be recorded in
the program chart.
^ Press and hold "Display" until the
desired value is displayed.
The main wash and final rinse
temperatures can be changed from
86°F - 158°F (30 °C - 70 °C) and the
temperature holding time from
1 - 10 mins.
^ Temperature holding time "Main
wash":
Turn the program selector to the
"STOP" position (the programming
level is displayed in this position
only).
Important: To wash dishes with
soiling, program to 140°F (60°C).
^ Press "Extra Drying" again. "E04"
(programming level 4) is displayed.
^ Turn the program selector to "STOP".
The programming level is displayed
in this position only.
^ Turn the program selector to the
program to be changed. The current
value is displayed after min.
^ Turn the machine off.
^ Press "Display" until the required
value is displayed.
^ Press and hold the "Display" and
"Start" buttons, and at the same time
turn the machine on with the "On /
Off" button.
The displays shows the current
program status "P...".
The "Fill/Drain" indicator lights.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming special functions
^ Temperature "Final rinse":
Turn the program selector to the
"STOP" position (the programming
level is displayed in this position
only).
^ Temperature holding time "Final
rinse":
Turn the program selector to the
"STOP" position (the programming
level is displayed in this position
only).
^ Press "Extra Drying" again. "E05"
(programming level 5) is displayed
field.
^ Press "Extra Drying" again. "E06"
(programming level 6) is displayed
field.
^ Turn the program selector to the
program to be changed. The actual
^ Turn the program selector to the
program to be changed. The actual
value is displayed after min.
value is displayed after °F.
^ Press and hold "Display", until the
desired value is displayed.
^ Press "Display" until the required
value is displayed.
^ Having changed a value or all
values:
^ Press the "Start" button. "SP" is
displayed.
^ Press the "Start" button again. The
change has been saved.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming special functions
6. Delay start and setting the delay
start time
b) Setting the delay start period
The delay start period (from 30 minutes
to 9 hours 30 mins) must be set before
a program is started.
The start of a wash program can be
delayed up to 9 hours and 30 minutes
in 30 minute increments.
^ After selecting a program (see
"Turning on") press or hold the
"Display" button it until the required
value is displayed. The "Delay Start"
indicator lights.
Delay start should only be selected with
the "Normal" and "Intensive" programs.
The short programs cannot guarantee
satisfying cleaning results when the
residues are allowed to dry on because
the start time is delayed.
After the "Start" button is pressed the
delay start period will count down in the
display until the program automatically
starts.
a) To activate Delay Start
^ Turn the program selector to "STOP".
^ Turn the machine off.
^ Press and hold the "Display" and
"Start" buttons, at the same time turn
the machine on with the "On / Off"
button.
The display shows the current
program status "P...".
The "Fill/Drain" indicator lights.
^ Press the "Extra Drying" button once.
"E01" (programming level 1) is
displayed.
^ Turn the program selector to "Drain"
either "80" or "81" is displayed.
"80" = No Delay Start
"11" = Delay Start active
^ Press "Display" to change from "80" to
"81" or vice versa.
^ Press the "Start" button. "SP" is
displayed.
^ Press the "Start" button again. The
change has been saved.
Value set:
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming special functions
7. Buzzer
^ Press "Display" until the desired
function is displayed.
A buzzer (30 secs) can be set for the
following functions:
^ Press the "Start" button. "SP" is
displayed.
– End of program = Buzzer constantly
^ Press the "Start" button again. The
change has been saved.
– Error = Buzzer sounds every other
second
Value set:
^ Turn the program selector to "STOP".
^ Turn the machine off.
^ Press and hold the "Display" and
"Start" buttons, at the same time turn
the machine on with the "On / Off"
button.
The display shows the current
program status "P...".
The "Fill/Drain" indicator lights.
^ Press the "Extra Drying" button once.
"E01" (programming level 1) is
displayed.
^ Turn the program selector to
"Intensive".
The display shows a figure between
"90" and "93".
"90" = Buzzer turned off
"91" = End of program
"92" = Fault
"93" = All functions / End of program /
Fault (default)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming special functions
8. Re-setting all changes back to the
factory default
^ Turn the program selector to "STOP".
^ Turn the machine off.
^ Press and hold the "Display" and
"Start" buttons, at the same time turn
the machine on with the"On / Off"
button.
The display shows the current
program status "P...".
The "Fill/Drain" indicator lights.
^ Press "Extra Drying" seven times.
"E07" (programming level 7) is
displayed.
^ Turn the program selector to any
position (except "STOP").
The display shows either "00" or "PP".
"00" = factory setting
(electronic was not reset).
"PP" = Electronic was reset.
^ If "PP" is displayed press "Display" to
change from "PP" to "00".
^ Press the "Start" button. "SP" is
displayed.
^ Press the "Start" button again. Values
which had been changed are now
reset.
If the hardness level setting in the
water softener had been changed
this will reset to the factory setting of
19 gr/gal (19 °d). This will need to
be adjusted back to the hardness
level in your area.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine care
Filter combination
Cleaning the fine, flat and micro-fine
filters
,The machine must not be used
without all filters in place. The filters
protect the circulation pump from
damage caused by foreign objects.
^ Remove the coarse filter.
^ Remove the fine filter (if fitted) from bet-
ween the flat and micro-fine filters.
The filter combination in the base of
the wash cabinet should be
inspected regularly and cleaned if
necessary.
Caution:
Watch out for sharp objects which
could cause injury.
Cleaning the coarse filter
^ To unscrew the micro-fine filter,
grasp the two tabs and turn
counter-clockwise twice.
^ Press the two tabs together. Remove
and clean the coarse filter.
^ Put the clean filter back in position
and press until it clicks in place.
^ Remove both filters together.
^ Clean the filters.
^ Replace the filter combination in the
reverse order. The flat filter must lie
flat in the base of the wash cabinet.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine care
Cleaning the spray arms
From time to time, particles may
become trapped in the spray arm jets.
The spray arms should be inspected
and cleaned every 4 - 6 months.
Remove the spray arms as follows:
^ Unscrew the upper spray arm.
^ Unscrew the middle spray arm
(under the upper basket) clockwise
at the knurled nut.
The knurled nut has a left hand thread.
To unscrew the spray arm turn the nut
and the spray arm to the right.
^ Use a sharp pointed object to push
particles into the spray arm jets and
rinse thoroughly under running water.
^ Open the cap of the lower spray
arm, by turning it clockwise, to rinse
out particles.
^ After cleaning close the cap tightly.
^ After replacing the spray arms check
that they rotate freely.
^ Remove the lower basket. Pull the
lower spray arm firmly upwards to
remove.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine care
Cleaning the non-return valve
and drain pump
If water has not been pumped away at
the end of a program, the drain pump
or non-return valve may be blocked.
^ Turn off the washer.
^ Remove the filter combination from
the wash cabinet.
The drain pump is located beneath the
non-return valve (see arrow).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully refit the non-return valve
and secure it with the locking clamp.
Refit and lock the filter in place.
^ Tilt the locking clamp to the side.
^ Pull out the non-return valve and
rinse under running water.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine care
Cleaning the filters in the water ^ Replace the filters and seal. Make
sure they are sitting correctly.
inlet
^ Reconnect the hose to the water inlet,
making sure that is not
Filters are incorporated in the screw
connection of the water inlet hose to
cross-threaded.
protect the water inlet valve. If these
filters become dirty they need to be
^ Open the water tap carefully.
If there is a leak, tighten the
cleaned, otherwise insufficient water
flows into the wash cabinet.
connections.
,The plastic housing of the water
Cleaning the control panel
connection contains an electrical
component. It must not be
submerged in water.
^ The control panel should only be
cleaned with a damp cloth or a
cleaner suitable for use on plastics.
To clean the filters
,Do not use abrasive cleaners,
glass cleaners or all-purpose
cleaners. They will damage the
control panel.
^ Disconnect the machine from the
main electrical supply.
^ Turn off the water supply.
^ Unscrew the water inlet hose.
Cleaning the front of the
machine
^ Use a cleaner suitable for the type of
material the machine front is fitted
with.
,Do not use detergents
containing ammonia or thinners.
^ Clean the large area filter, 1, and fine
filter, 2. Replace with new filters if
necessary.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Correcting minor faults
With the aid of the following notes,
minor faults can be corrected without
contacting the Miele Service
Department.
Faults / possible causes
The machine does not start
– the door is not properly closed
– the plug is not properly inserted
– the fuse is defective or has blown
Any work on the electrical
components of the machine should
only be carried out by a qualified
and trained person in accordance
with local and national safety
regulations. Unauthorized repairs
could cause personal injury or
machine damage.
A few minutes after turning on, the
"Fill/Drain" indicator flashes (fault
code F..E is displayed)
– the valves are closed
– the filters in the water inlet hose are
dirty
– water pressure is too low
^ Turn the program selector to the
"STOP" position (the fault code goes
out).
^ Turn the machine off.
^ Open the valves or clean the filters
(see "Machine care").
^ Turn on the machine again and
re-select the program.
The wash cycle finishes too early
and the"Fill/Drain" indicator flashes
(fault code F A is displayed)
– the drain hose is kinked
– the drain pump is blocked
^ Turn the program selector to the
"STOP" position (the fault code goes
out).
^ Correct the fault.
^ Drain the water and start the program
again (see the drain program and
"Turning on").
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Correcting minor faults
Water in the wash cabinet is not
heated / the program sequence lasts
too long
This machine has a resettable heater
limiter which will switch off the heaters
in the case of over-heating. This could
be caused, for example, by large
articles obscuring the heating elements
or when the filters in the wash cabinet
are blocked.
^ Remove the cause of the fault.
^ Take off the service panel (see
"Electrical connection").
^ Press the reset button on the heater
limiter (yellow) located on the left-
hand side of the plastic cover.
If this switch trips again, please
contact the Miele Technical Service
Department.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
In the event of a fault which you cannot
correct yourself or if the fault code "F..."
shows in the display please contact the
Miele Service Department at the phone
number on the back of these
instructions.
^ Please quote the model and serial
number of your machine.
This information can be found on the
data plate (see also "Electrical
connection").
43
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
To prevent accidents
and machine damage
read these instructions
before
installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposal of the appliance
Appliances contain materials which can
be recycled. Please contact your local
authorities about recycling in your area.
The protective packing materials are
environmentally safe and can be
recycled.
Ensure that the machine presents no
danger to children while being stored
for disposal. See "Important Safety
Instructions".
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Please refer to the installation
If necessary, the machine lid can be
removed as follows:
diagram supplied with the machine.
^ Open the door.
,Furniture and fittings installed
near the machine must be of a
commercial standard, able to
withstand the effects of steam and
condensed water.
Installation options
– Free-standing
– Undercounter
The machine should be positioned
under a continuous worktop or sink
drainer.
The opening must be at least 23 5/8"
(60 cm) wide, 23 5/8" (60 cm) deep and
34 1/4" (82 cm) high.
^ Remove the fixing screws on both
sides using a Phillips screwdriver.
^ Pull the machine lid approx. ¼"
(5 mm) forwards, lift and remove.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Leveling the machine
Depending on the requirements for
installation, the following "kits" can be
ordered from the Miele.
Any unevenness in the floor can be
compensated for.
^ Adjust the four screw feet to raise or
lower the height of the machine.
Cover plate (protects the countertop)
The underside of the countertop is
protected from steam damage by a
"niro" stainless steel plate.
Position and secure the
machine
To ensure stability the machine must
first be aligned and then screwed to the
countertop.
^ Open the door.
^ Through each of the two holes in the
front trim, left and right, screw the
machine to the front edge of the
continuous countertop.
^ Do not use silicone sealant to seal
the gaps between the machine and
any neighboring units, this would
hinder ventilation to the circulation
pump.
Stainless steel toe kick
A stainless steel toe kick is included for
easing undercounter installations.
Please refer to installation directions
included with the toe kick.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
WARNING
,All electrical work must be
carried out by a suitably qualified
person in compliance with local and
national safety regulations.
THIS APPLIANCE MUST BE
GROUNDED
Grounding the machine
A connection screw with the grounding
symbol (8) is provided on the back of
the machine for grounding.
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele Service Technician.
^ For technical data see the data plate
or wiring diagram supplied.
PLEASE NOTE:
The machine must only be operated
with the voltage, frequency and fusing
shown on the data plate.
The G 7856 is available as two
separate versions:
a 240V version,
a 208V version.
The data plate is located on the rear of
the machine and behind the service
panel on the upper left side.
To avoid machine damage, please
ensure proper outlet voltage prior to
installation.
The dishwasher can be converted
according to the supplied converting
diagram and wiring diagram.
The wiring diagram is located behind
the operating panel.
The conversion diagram is located
behind the service panel.
^ See also the supplied installation
diagram.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Removing the service panel and the
protective plastic cover
,Isolate the machine from the
power supply.
^ Holding the service panel on both
sides, pull gently outwards from
beneath, a, and remove it, b.
^ Remove the protective plastic cover
and unscrew the 2 screws (left and
right), c.
To reassemble:
^ Refit the protective plastic cover and
the service panel in the reverse
order.
^ See also the supplied installation
diagram.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Connection to the water inlet
^ Valves with 3/4 inch male threads are
to be provided on site. They should
be easily accessible so that the water
supply can be turned off when the
machine is not in use.
,Water in the machine is not
suitable for drinking.
^ The machine must be connected to
the water supply in accordance with
local and national regulations.
^ The DN 10 inlet hose is approx. 5' 7 "
(1.7 m) long ending in a 3/4 inch
female thread. Do not remove the
inlet filters.
^ The machine is constructed to
comply with Canada regulations, and
may be connected to a suitable
supply without an extra non-return
valve provided that national
^ Large surface area filters are
enclosed in the kit supplied with the
machine for installation between the
valve and the inlet hose
regulations allow this.
(see illustration in "Machine Care -
Cleaning the filters in the Water
inlet").
^ The water pressure (flow rate) must
be a minimum of 7.25 - 145 psi.
If the water pressure (flow rate) is
below 29 psi the fill time is
automatically extended.
The maximum permitted static
pressure is 145 psi.
If the water pressure is not in the
range of 7.25 - 145 psi the "Fill/Drain"
indicator may come on and the fault
code "F2 E" will show in the display.
Please contact the Miele Service
Department.
^ The machine is supplied as standard
for connection to a cold (coded blue)
and a hot (coded red) water supply
up to a max. temperature of 158°F
(70 °C).
,The inlet hose must not be
shortened or damaged in any way.
The inlet hoses should be connected
to the cold and hot water supplies.
If there is no hot water connection the
hot water inlet hose marked red
should also be connected to a cold
water supply.
^ See also the supplied installation
diagram.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Drainage
^ The drainage system is fitted with a
non-return valve which prevents dirty
water from flowing back into the
machine via the drain hose.
^ The machine should preferably be
connected to a separate drainage
system onsite.
If separate drainage is not available
contact your Miele application
specialist for advice.
The onsite drain connection point
should be located between 1 ft.
(0.3 m) and 3 ft. (1 m) above the
lower edge of the machine.
If it is lower than 1 ft. (0.3 m), lay the
hose in a curve at a height of at least
1 ft. (0.3 m).
The drainage system must be able to
take a minimum drainage flow of
16 l/min.
^ The drain hose is approx. 5 ft. (1.5 m)
long, is flexible and has an internal
diameter of 7/8 in. (22 mm). It must
not be shortened. Hose clamps are
supplied for securing it in position.
^ A longer drain hose (up to 13 ft. [4 m]
long) is available to order from Miele.
^ The drainage system must not
exceed 13 ft. (4 meters).
^ See the supplied installation diagram.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
English
Metric
Height:
Width:
Depth:
33 " (32 1/4")
½
85 (82) cm
60 cm
23 5/8"
23 5/8"
60 cm
Voltage:
see data plate
see data plate
see data plate
Rate load:
Fuse rating:
Connection cable:
approx. 5' 10"
1.8 m
Water pressure
(flow pressure):
7.25 - 145 PSI
50 - 1000 kPa
Cold or
hot water connection:
up to max. 158°
max. 13’
70 °C
4 m
Drainage length:
Delivery head:
min. 12"
max. 39 3/8"
0.3 m
1 m
Inlet hose:
approx. 5’ 7"
approx. 4’ 7"
Built under: 61
1.7 m
1.4 m
Drain hose:
Noise level in dB (A):
53
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
All rights reserved / 3807
M.-Nr. 06 868 521 / 00
Download from Www.Somanuals.com. All Manuals Search And Download.
|