Miele Cooktop KM5656 User Manual

Operating and Installation

Instructions

Ceramic Cooktop

KM 5656

en - US, CA

To prevent accidents and

machine damage,

read the Operating Manual

before installation or use.

M.-Nr. 06 611 220

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

READ THE OPERATING

To guarantee the electrical safety

of this appliance, continuity must

exist between the appliance and an

effective grounding system. It is

imperative that this basic safety

requirement be met. If there is any

doubt, have the electrical system of the

house checked by a qualified

INSTRUCTIONS CAREFULLY

BEFORE USING THE

COOKTOP

WARNING -

This appliance is only intended for

residential cooking. The

electrician. The manufacturer will not be

held responsible for damages caused

by the lack, or inadequacy, of an

effective grounding system.

manufacturer cannot be held

responsible for damage or injury

caused by improper use or for uses

other than those for which this

appliance is intended.

Only for frame/facet cooktops:

A small gap will be visible between

cooktop and countertop for the first

days after installation. The gap will

decrease as the cooktop is used. The

electrical safety of your appliance is

warrantied despite the small gap.

When using your appliance follow

basic safety precautions including

the following:

Installation

Use

Be certain your appliance is

properly installed and grounded by

a qualified technician in accordance

with national and local safety

regulations. The manufacturer cannot

be held responsible for damage

caused by incorrect installation or

connection.

Do not use the appliance until it

has been properly installed in the

countertop.

This appliance is equipped with an

overheating protection feature. See

"Overheating protection" for more

information.

Do not connect the appliance to

the main electrical supply using an

extension cord. Extension cords do not

meet the safety requirements of this

appliance.

Never use the appliance to heat a

room. Due to the high

temperatures radiated, objects left near

the appliance could catch fire.

When the cooktop is turned on for

an extended period of time, the

control panel may get warm. This is not

a malfunction.

Before servicing, disconnect the

appliance from the main power

supply.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Injury prevention

Protect your hands with insulated

gloves or potholders when using

the appliance. Use only dry, heat

resistant potholders. Moist or damp

potholders used on hot surfaces can

result in steam burns. Do not let the

potholder touch the hot heating

Children should not be left

unattended in an area where the

cooktop is in use. Never allow children

to sit or stand on any part of the

cooktop.

Caution: Do not store items of interest

to children in cabinets above the

cooktop. Children climbing on the

cooktop to reach these items could be

injured.

elements. Do not use towels or other

bulky items near the appliance.

Be aware of loose fitting or hanging

garments when operating the

cooktop, they may present a fire

hazard.

Use the Safety Lock to prevent

children from turning on the

cooking zones or changing the

settings. See "Safety lock" for more

information.

Use the proper pan size. Select

cookware with flat bottoms large

enough to cover the heating element.

Using undersized cookware will expose

a portion of the heating element and

may result in ignition of clothing or

handles becoming hot. The proper size

pot or pan will also improve efficiency.

Keep all pots and pans out of the

reach of children. Danger of

burning or scalding. Special

cooktop/stove guards are available

from retail outlets.

Pot and pan handles should be

turned inward and not extend over

the countertop to reduce the risk of

burns, ignition of flammable materials,

and spills.

Do not touch the cooktop or the

surrounding areas during or

immediately after use. The cooktop may

be hot even though it is dark in color.

Wait until the residual heat indicators

go out.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Never leave a cooktop unattended

To prevent burns and breathing

difficulty, allow the cooktop to cool

before cleaning. Some cleaners may

produce toxic fumes if applied to a hot

surface.

at high settings or when cooking

with oil or fat. Overheated oil could

ignite. Always heat oil slowly,

monitoring it as it heats.

Do not use water on grease fires.

Smother or use a dry chemical or

foam-type extinguisher on any fire or

flame.

When wiping spills on a hot

cooktop with a wet sponge or

cloth, be careful to avoid steam burns.

Do not let flammable materials,

i.e. cooking grease, accumulate on

the appliance.

When frying food make sure that

the food is as dry as possible

before placing it in oil. Moisture can

cause hot oil to splatter and boil over.

At high settings, be cautious of

splattering grease or boiling over

liquids which may produce smoke.

Never cover the cooktop with a

cloth. A fire may result.

Do not store items on the cooktop

when not in use. Items could melt

or catch fire from residual heat or if the

cooktop is turned on inadvertently.

Do not flambé under an exhaust

hood. Flames could be drawn up

into the hood by the suction and the

grease filters may ignite.

Flammable materials should not be

stored on or near the appliance.

Do not heat unopened containers.

Built-up pressure may cause the

If there is a drawer directly

underneath the appliance without a

protective base between it and the

cooktop, ensure that no aerosols,

combustible liquids or other flammable

materials are kept in it. If cutlery inserts

are to be placed in the drawer they

must be made of heat-resistant

material.

container to burst and result in injury.

Before removing pots and pans be

sure to turn off the burners.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Damage protection

Do not allow either solid or liquid

sugar, pieces of plastic or foil to fall

on the burners when they are hot. If

these residues are allowed to cool on

the ceramic surface pitting or even

cracking may occur.

Never place hot pots or pans over

the touch controls, this may

damage the electronics.

Do not drop anything on the

ceramic surface of the cooktop.

Even lightweight objects may cause

damage.

Any spills should be removed as

quickly as possible to prevent them

from burning on and becoming difficult

to remove.

Do not use pots or pans with

pronounced edges or ridges on

the ceramic cooktop. These could

scratch the cooktop permanently. See

"Selecting cookware" for more

Do not use a steam cleaner to

clean this appliance. Steam could

penetrate electrical components and

cause a short circuit.

information. Grains of salt and sand can

cause scratches. Make sure that the

bases of any pots and pans are clean,

free of any fat or oils and are dry.

To prevent damage to the cooktop

do not use pots and pans with thin

bases on the cooktop. Never heat an

empty pan unless the pan manufacturer

states that you can do so.

Before using glass, glass/ceramic,

ceramic, earthenware or other

glazed cookware verify that they can be

used on a cooking surface.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Appliance safety

Further safety notes

In the event of any damage to the

appliance, it must be turned off

immediately and disconnected from the contact with the cooktop. The insulation

Make certain that the power cords

of small appliances do not come in

main power supply. Call Miele’s

Technical Service Department.

Do not use the appliance until it has

been repaired. Ensure power is not

supplied to the appliance until repair

work is completed.

of the cable could become damaged.

Danger of electric shock!

Do not use plastic or aluminum.

They will melt at high temperatures.

Fire hazard!

If a pet gets on the cooktop a

touch control sensor could be

Do not cook on a broken cooktop.

Any breakages or cracks in the

activated turning on a burner. Keep

pets away from the cooktop at all times

and activate the Safety Lock.

ceramic surface of the appliance are

defects and must be treated as such. If

the cooktop should break, cleaning

solutions and spills may penetrate the

broken cooktop and create a risk of

electric shock. Do not use the

SAVE THESE INSTRUCTIONS

AND REVIEW THEM

PERIODICALLY

appliance until it has been repaired.

Repairs should only be performed

by qualified technicians to ensure

safety. Repairs and other work by

unqualified persons could be

dangerous. Under no circumstances

open the outer casing of the appliance.

While the appliance is under

warranty repairs should only be

performed by an authorized service

technician. Otherwise the warranty is

void.

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the appliance

Cooktop

ac Single burners

b Extended burner

d Variable burner

e Burner controls and displays

f Cooktop on or active indicator

g Cooktop ON/OFF touch control

h Safety lock touch control

i Safety lock indicator

j Timer controls and display

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the appliance

Burner controls and displays

a Touch controls

To select the power level (touch individually).

To activate the second heating circle of the variable burner (touch simultaneously).

b Burner On/Off touch control

c Display:

= Burner is ready for use

= Burner is turned on

1 to 9 = Power level

= Residual heat

= Fault (see "Safety cut-out feature")

= Auto-heat with extended power level range

po etc. = Program (see "Cooktop Settings")

so etc. = Status (see "Cooktop Settings")

d Auto-heat indicator e.g. for front left burner

e Indicator shows activated variable or extended burner zone

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the appliance

Timer controls and display

a Timer display

b Touch controls for setting the time

c Timer touch control

To turn the timer on/off, to toggle

between timer functions and to

select a burner for auto turn off.

d Auto turn off indicator,

e.g. rear right burner

Burner data

Burner

KM 5656

diameter in inches / cm

Power in watts

1100 / 2400

4 ³/₄" / 8 ¹/₄"

(12 / 21 cm)

5 ¹¹/₁₆" (14.5 cm)

1200

6 ¹¹/₁₆" / 6 ¹¹/₁₆" x 10 ⁷/₁₆"

(17 cm / 17 x 26.5 cm)

1500 / 2400

7 ¹/₁₆" (18 cm)

1800

All burners 7800

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

Clean the cooktop

Touch controls

Before using for the first time, clean and This cooktop has electronic controls

dry the cooktop with a soft damp cloth.

activated by the touch of a finger. There

is a separate touch control for each

burner. A tone sounds to indicate that

contact has been made with a control.

Heat the cooktop

The metal components of the cooktop

have a protective coating which may

give off a slight odor the first time the

appliance is heated.

Keep the control area clean and do

not rest things on it. The touch

control sensors could mistake an

item or debris for a finger touch,

turning the cooktop on or off.

The smell will dissipate after a short

time and does not indicate a faulty

connection or appliance defect.

To prevent damage to the

electronics never place hot pans on

the control panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Resetting the touch controls

Automatic reset

Manual reset

To ensure the cooktop functions

properly the touch controls will

automatically reset:

^ Make sure no direct light (sun or

artificial) beams onto the cooktop.

The surrounding area of the cooktop

should not be completely shaded or

brightly lit.

– when the cooktop is connected to

the electrical supply,

^ Make sure the cooktop and the touch

controls are not covered. Remove all

pots and pans and clean the cooktop

if necessary.

– if there is an interruption to the

electrical supply, and

– during use in response to changing

light conditions.

^ Trip the circuit breaker to the cooktop

or disconnect the appliance from the

power supply for 1 minute.

During the automatic reset of the touch

controls the Child Safety Lock indicator

will light and the cooktop cannot be

turned on.

The touch controls will automatically

reset when power is restored.

If the automatic reset could not be

completed an A will appear in the rear

left burner display and an F will appear

in the rear right burner display. The

front left and front right burner displays

will show numbers.

If the problem persists, contact

Technical Service.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use

Turning on the cooktop

Turning on a variable or

extended burner

^ Touch the s On/Off cooktop touch

control.

The second circle of a variable burner

or the extended burner can be turned

on to extend the cooking area for larger

pots and pans.

A horizontal bar – will appear in each of

the burner displays and the On/Off

indicator will light. If no setting is

chosen within a few seconds the

cooktop will turn itself off as a safety

measure.

^ Turn the burner on.

^ Touch simultaneously the - and +

controls of the respective burner.

Turning on a burner

– left controls, lower +/- for the g

variable burner

^ Touch the s On/Off touch control for

the desired burner.

– right controls, upper +/- for the C

variable burner

The respective burner display shows 0.

^ Select a power level.

^ Select a power level between 1 and 9

by pressing the - or + control.

The burner indicator will light to show

the second heating element.

When turning on the cooktop you can

decide whether you want to cook with

auto heat or not. See "Auto heat" for

more information.

To turn the extended heating element

off touch the - and + controls

simultaneously again.

Turn on with + to:

Cook without auto heat

Turn on with – to:

Cook with auto heat

Download from Www.Somanuals.com. All Manuals Search And Download.

Use

Settings

Use for

Power level*

Melting butter, chocolate, etc.

Dissolving gelatin

1 - 2

Preparing yogurt

Thickening sauces containing egg yolk and butter

Warming small quantities of food or liquid

Warming sticky foods

1 - 3

2 - 4

3 - 5

Cooking rice

Warming liquid and half-set foods

Thickening sauces

Cooking rice pudding

Cooking eggs

Defrosting deep frozen food

Steaming vegetables and fish

Cooking dumplings, pasta and soups

Cooking broths

Boiling and continued cooking of large quantities of food

Gentle frying (without overheating the fat) of fish, sausages,

fried eggs, etc.

6 - 7

Frying pancakes, etc.

7 - 8

8 - 9

Boiling a large volume of water

Auto heat

* These settings are intended as a guide only. When cooking with large pots,

large quantities or without using a lid a higher setting is needed. For smaller

quantities select a lower setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use

Auto heat

Power level

Heat up time

When auto heat has been activated the

burner turns on automatically at the

highest setting and then changes to the

continued power level which was

selected. The heat-up time depends on

which continued power level has been

chosen (see table).

(minutes : seconds)

1 : 20

2 : 45

4 : 05

5 : 30

6 : 50

1 : 20

2 : 45

If a high continued power level was

selected, a shorter heat-up time is

necessary.

To activate auto heat

^ If 0 shows in the display, touch the -

until the desired continued power

level is displayed, e.g. 6.

During the heat up a dot lights next to

the power level number. When the heat

up time is complete the dot goes out.

The continued power level can be

increased or decreased during the heat

up phase with the -/+ controls. The heat

up time changes accordingly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use

Turning off a burner

Residual heat indicator

^ Touch the s On/Off touch control for

the desired burner.

The display shows - for a few seconds.

If the burner is still hot the residual heat

indicator will show.

The bars in the residual heat indicator

go out one after another as the burner

cools. The last residual heat indicator

will go out when the burner is cool

enough to touch.

Turning off the cooktop

^ Touch the s On/Off control for the

cooktop.

Do not touch the burner or rest any

objects on the cooktop when the

residual heat indicator is on. Danger

of burns!

All burners are turned off. If any burners

are still hot the residual heat indicator

will show in the respective display.

After a power failure the residual

heat indicator will flash.

Caution: If there is a fault, the

residual heat indicator will not light

even if the burners are still hot.

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting cookware

Following these tips will allow you to

make the most of your ceramic

cooktop.

Pots and pans

Special cookware is not required, but

as is true with all types of cooking

appliances, the better the cookware,

the better the performance.

The cooking surface

The ceramic cooktop is made of an

extremely hard and durable material.

The surface is scratch resistant, not

scratch proof. Avoid using cookware

with ridged bottoms. Ridged pots with

dirty or chipped enamel bottoms may

scratch the cooktop if they are pulled

across the ceramic surface.

– For the most even and energy

efficient cooking, the diameter of the

pots/pans should match the diameter

of the burners as closely as possible.

Make sure the cooktop and pot bottoms

are clean before cooking. Certain

items, particularly sugar grains or

crystallized liquids such as molasses or

syrups are harder than ceramic and

can scratch the surface if they are not

cleaned off immediately. Small or light

scratches will not affect the safety or

performance of the cooktop.

– Use cookware with thick, flat, smooth

bottoms. Slightly concave bottoms

will also work adequately. Pans with

convex bottoms will not cook well.

The burner rings and touch controls are

fused into the ceramic glass and are

resistant to wear if properly maintained.

Do not use abrasive cleaners or pads,

as they may eventually wear off the

rings.

– Using a lid while cooking will

minimize the loss of heat and

decrease the cooking time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting cookware

Copper bottom and aluminum pans

may leave a residue on the cooktop in

the form of metallic lines. This is normal.

These lines can be removed using a

non-abrasive ceramic cooktop cleaner

or a shielded scraper blade.

Be sure to clean the cooktop after

each use. Each time this residue is

allowed to melt it becomes harder to

remove and may mar the

appearance of the cooktop.

Let the cooktop cool before

cleaning.

Cast iron, glass or stoneware should

not be used because they have poor

heat transfer and may scratch the

cooktop surface.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer

The cooktop has a timer which can be

used to:

Setting the timer

The timer can be set with the cooktop

either turned on or off. It can be set

from 1 to 99 minutes.

– time any activity in the kitchen.

– automatically turn off one (any)

burner.

^ Touch the m timer control to turn the

timer on.

The functions above can also be used

simultaneously.

The display shows 00.

^ Press and hold the - or + sensor until

the desired time is displayed, e.g. 15

minutes.

Quick Guide:

Turn on

Set

Touch m

with - set from 99

to 00 minutes

with + set from 00

to 99 minutes

The set time counts down in minutes in

the time display. The remaining time is

displayed and can be changed at any

time by pressing - or +.

Toggle between Touch m

the functions

Reset back to 00 touch - and +

simultaneously

After the set time has elapsed the

display shows 00 and an audible signal

is heard. After a few seconds the tone

will stop and the 00 will go out.

^ To end the signal touch the m timer

control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer

Setting the timer to turn off a

burner automatically

The set time counts down in minutes in

the time display. The remaining time is

displayed and can be changed at any

time by pressing - or +. The power level

can also be changed at any time.

To use this feature a power level must

be selected for the desired burner.

^ Turn the desired burner on and

select a power level.

When the set time has elapsed:

– the burner will automatically turn off,

– the burner display will show 0,

– the timer display will show 00, and

– an audible signal will be heard.

^ Touch the m timer sensor.

The display will show 00.

^ Touch the m timer sensor again.

An indicator will light in the time

display.

After a few seconds the tone will stop

and the 00 will go out.

^ If multiple burners are turned on,

press and hold the m timer sensor

until the indicator of the desired

burner lights, e.g. rear right.

^ To end the signal touch the m

sensor.

To toggle between the functions

With every touch of the m timer sensor

the indicators for the activated burners

light up clockwise from front left to front

right.

If the timer is already used with one

function and the second function is

desired:

^ Touch the m sensor.

The timer display will show 00. Follow

the steps as previously described.

To monitor the remaining time in the

function which is not displayed, touch

the m sensor once.

^ Press and hold the - or + sensor until

the desired time is displayed, e.g. 15

minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety features

Child Safety Lock

To deactivate the Child Safety Lock

^ Press and hold the $ Child Safety

Lock control until the indicator goes

out.

Keep children away from the

cooktop for their own safety.

The cooktop has a Child Safety Lock to

prevent children from turning on the

burners or changing the settings.

In the case of a power failure the

Child Safety Lock will be

deactivated.

The Child Safety Lock can be activated

while the cooktop is on or off.

Activating the Child Safety Lock

during cooktop use

– The settings for the burners and for

the timer cannot be altered.

– The burners and cooktop can still be

turned off but once turned off cannot

be turned on again.

Activating the Child Safety Lock

when the cooktop is turned off

– The cooktop cannot be turned on.

To activate the Child Safety Lock

^ Press and hold the $ Child Safety

Lock control until the respective

indicator lights.

The indicator will go out after a short

time.

If you touch the $ Child Safety Lock

control or select a setting, the indicator

will come on again to show that the

Child Safety Lock has been activated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety features

Stop and Go

To activate Stop and Go

Stop and Go is a feature which reduces ^ Press and hold the $ Lock control

the power of all turned on burners. The

cooktop can be left for a short time

without supervision and the danger of

boilovers.

until you hear two audible signals in

quick succession. Do not touch the

$ Lock control too long or the Safety

Lock will be activated.

The safety lock indicator will flash. The

power for the activated burners is now

reduced to power level 1. The

respective burner will display 1.

If the automatic turn off function is

programmed for a burner, the time will

be interrupted when activating "Stop

and Go". The time will continue when

"Stop and Go" is deactivated.

To deactivate Stop and Go

^ Press and hold the $ Safety Lock

control until the indicator goes out.

The burners will now operate with the

last selected power level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety features

Safety cut-out feature

Covered touch controls

The cooktop will turn off automatically if

any of the touch controls are covered

for more than 10 seconds, e.g. by

finger contact, food boiling over, or an

object such as an oven mitt or towel.

The cooktop is on too long

The cooktop has a safety cut-out

feature in case it is not turned off after

use.

If a burner is turned on for an unusually A tone will sound every 30 secs. for

long period of time (see table), and the

power levels are not adjusted, the

max. 10 min. The display will show a

flashing F.

cooktop will turn itself off automatically

and the residual heat indicator will light.

Power level

Maximum

^ Clean the touch controls or remove

the object.

operating hours

This will turn off the signal tone and the

displayed F will go out.

^ Turn the cooktop on again with the s

touch control. The burners can now

be used.

^ If you wish to use the burners once

again, turn the cooktop on as you

normally would.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety features

Overheating protection

Each burner is equipped with a

temperature limiter. This limiter turns off

the heating elements in the burner

before the ceramic surface becomes

too hot. Once the ceramic surface has

cooled to a safe temperature the

heating elements will automatically turn

back on.

The overheating protection may be

activated by:

– turning on a burner without putting a

pan on it.

– heating an empty pan.

– an uneven pan not sitting evenly on

the burner.

– the pan not conducting heat

properly.

If the heating elements cycle on and

off, even at the highest setting, the

overheating protection has been

activated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cooktop Settings

The following default cooktop settings

of the cooktop can be reprogrammed if

needed:

Auto-heat settings

Default power

Demo mode

Power level range

Residual heat indicator

Safety lock

Stop and go

Timer function

Timer start setting

Timer tone

Tone for touch controls

If you would like to reprogram the

settings of your cooktop, please

contact Miele for assistance.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Care

Do not use a steam cleaner to clean

this appliance. Steam could

penetrate electrical components and

cause a short circuit. Pressurized

steam could cause permanent

damage to the surface and to

components for which the

Clean any spills immediately before

they become difficult to remove.

Clean the appliance regularly,

preferably after each use. Allow the

appliance to cool before cleaning.

^ Wipe off any soiling using a damp

cloth. Stubborn soiling is best

removed with a shielded scraper

blade.

manufacturer cannot accept

responsibility.

Do not use any sharp pointed

objects which could damage the

seal between the ceramic surface,

the surrounding frame and the

countertop.

^ Apply a ceramic cleaner using a soft

cloth or paper towel. To remove any

limescale deposits or metallic residue

apply a ceramic cleanser using a soft

cloth or use a shielded scraper blade

if necessary.

Never use abrasive cleaners, caustic

(oven) cleaners, dishwasher

detergent, scouring pads, steel wool

or hard brushes. They will damage

the surface.

^ After cleaning wipe the ceramic

surface with a damp cloth and dry.

A cleaner with a special additive to

prevent water marks and smears on the

ceramic surface may be used.

The ceramic surface can be cleaned

using a cleaner for ceramic

surfaces. Follow the manufacturer’s

instructions.

Any melted solids like sugar, plastic or

aluminum foil should be removed as

soon as possible, while the burner is

still warm. If they are allowed to harden

the cooktop may become pitted.

Make sure that no cleaner residue

remains on the ceramic surface by

carefully wiping the cooktop with a

damp cloth. They may damage the

cooktop or produce toxic fumes

when heated.

^ Turn the burner off.

^ Using a shielded scraper blade,

scrape the melted item immediately

off the burner while it is still hot.

Use caution: Danger of burns!

Be sure that pot and pan bases are

clean and dry.

^ Allow the cooktop to cool and clean

as previously described.

After cleaning dry the ceramic

surface with a soft cloth to prevent a

build up of limescale deposits.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

,^{Repairs should only be carried out by an authorized technician in}

accordance with local and national safety regulations. Unauthorized repairs

could cause injury or appliance damage. The manufacturer cannot be held

responsible for unauthorized work.

What if the cooktop or the burners cannot be turned on?

Possible fault

Fix

The Safety Lock is activated.

Deactivate the safety lock.

See "Safety lock".

The main fuse has blown.

Check the main fuse.

What if the burner does not heat up but can be turned on and a power level

can be selected?

Possible fault

Fix

The cooktop is in the demo mode. Call Miele Technical Service.

What if the cooktop turns off during use, a tone sounds and the residual

heat indicator or a flashing F appears?

Possible fault

Fix

The burner was on for too long or See "Safety cut-out feature".

the touch controls are covered.

What if a heating element turns off then on again?

Possible fault

Fix

The overheating protection has

activated.

See "Overheating protection".

What if food does not cook when using auto-heat?

Possible fault

Fix

The pot or pan does not transfer

heat properly.

Use the correct pots and pans, see

"Selecting cookware".

Large amounts of food are

cooked.

Select a higher continued power level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if one or more residual heat indicators flash?

Possible fault

Fix

There was a power failure during use.

The burners are turned off.

Turn the cooktop on as usual.

The residual heat indicators were lit

while the programming mode, e.g.

Safety Lock, Stop and Go, was

selected.

The residual heat indicators will flash

for about 45 minutes after leaving the

programming mode.

The cooktop can be used as usual.

What if when the cooktop is turned off, the burner displays show A, F and

numbers?

Possible fault

Fix

The touch controls could not be reset

automatically. They must be reset

manually.

See, "Resetting the touch controls -

Manual reset".

If the problem persists, call Miele

Technical Service.

What if the rear burner display shows F, the front burner display shows E

and the timer shows numbers?

Possible fault

Fix

Trip the circuit breaker to the cooktop

or disconnect the appliance from the

main power supply for 1 minute.

If the problem persists, call Miele

Technical Service.

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Service

In the event of a fault which you cannot

easily fix yourself, please contact the

Miele Technical Service Department at

the address on the back of this booklet.

When contacting Technical Service

please quote the serial number and

model of the cooktop. This information

is visible on the silver data plate

supplied with the cooktop.

Adhere data plate sticker here:

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation Instructions

To prevent accidents

and machine damage

read these instructions

before

installation or use.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Note to the installer:

Please leave this instruction book

with the consumer for the local

electrical inspector’s use.

The minimum distances given in

these Installation Instructions must

be observed in order to ensure safe

operation. Failure to do so increases

the risk of fire.

recommended

The cabinetry and venting hood

should be installed first to prevent

damage to the cooktop.

The cooktop can only be installed

as shown in the illustrations while

maintaining the required safety

distances shown. Do not install the

cooktop between two tall cabinets, this

is a fire hazard.

A minimum distance of 2" (50 mm)

from the cooktop to the rear wall and

a side wall must be maintained for

safety.

not recommended

The countertop must be bonded

with heat resistant (212 °F/100 °C)

adhesive to prevent distortion and

dissolving.

The cooktop must not be installed

over a dishwasher, refrigerator or

freezer. Heat radiated by the cooktop

may damage them.

not allowed

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

To eliminate the risk of burns or fire Safety distance above the

by reaching over heated surfaces,

appliance

cabinet storage space above the

cooktop should be avoided. If cabinet

storage is necessary, the risk can be

reduced by installing a venting hood to

project horizontally a minimum of 5"

beyond the bottom of the cabinets.

Because of the heat radiated it is

not recommend to install the

cooktop above a drawer. It should be

installed above a cabinet base unit with

a dummy drawer front. A protective

base should also be installed between

the dummy drawer and the cooktop.

As a general rule there must be a safety

This appliance is not designed for

distance of at least 30" (760 mm)

maritime use or for use in mobile

between the appliance and any

installations such as recreational

objects above it, e.g. cabinetry, venting

vehicles or aircraft. However, under

hood, etc. If the manufacturer of these

certain conditions it may be possible for

items states a different figure, always

installation in these applications. Please

adhere to the greater distance. These

contact the Miele Technical Service

measurements should be given in their

Department with specific requirements.

operating and installation instructions.

The cooktop must not be

If there is more than one appliance

permanently sealed into the

beneath a hood, e.g. wok burner

countertop when installed. The sealing

and electric cooktop and they have

strip under the edge of the cooktop

different minimum safety distances

provides a sufficient seal for the

always select the greater distance.

countertop. See "Sealing".

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Cooktops flush with the countertop

Frame/Facet cooktops

a Wall

b Wall covering

c Back splash strip

d Countertop

e Countertop cut-out

f 2" (50 mm) minimum distance

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Installation dimensions

a Spring clips

b Installation height

c Installation height power supply line

d Front

e Flexible stainless steel hose

Length = 3’ 11" (1200mm)

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Cut out

If during installation the seal around

the frame does not sit flush with the

countertop in the corners, the corner

radius, maximum ³/₁₆" (4 mm), can

be carefully filed down to fit.

^ Make the countertop cut-out following

the dimensions given in the

illustration.

Remember to maintain a minimum

distance of 2" (50 mm) between the

rear wall and the right or left side.