Operating instructions
Coffee System
CVA 615
UV
To prevent accidents and
machine damage,
read these instructions
before installation or use.
M.-Nr. 06 494 750
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Coffee system care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Daily care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Exterior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Drip catch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Waste unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Cleaning the brew unit filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Descaling the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Fault messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Installation options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Coffee glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
Read all instructions before installation or use of the coffee system.
Electrical safety
Please read these instructions
Before connecting the appliance to
carefully to prevent accidents and
the electrical supply, make sure
machine damage.
that the voltage and frequency listed on
the data plate correspond with the
This appliance is for household use
household electrical supply. If in doubt,
only. Any other use is not
consult a qualified electrician.
recommended by the manufacturer
Be certain your appliance is
properly installed and grounded by
a qualified technician.
and could be dangerous.
This appliance complies with current
safety requirements. Improper use of
the appliance can cause personal
injury and material damage.
To guarantee the electrical safety of this
appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician. The manufacturer
cannot be held responsible for
damages caused by the lack, or
inadequacy, of an effective grounding
system.
The manufacturer cannot be held
responsible for damage caused by
improper use of the appliance.
The appliance must be built into
cabinetry before operation to
ensure that no electrical components
are accessible. Ensure that electrical
power is not supplied to the appliance
while installation work, repairs or
maintenance is performed.
Do not use an extension cord to
connect the appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance
(danger of overheating).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Never open the housing of the
appliance. Tampering with
electrical connections or components
and mechanical parts is dangerous and
may cause machine damage.
Installation
Installation work and repairs should
only be performed by a trained
technician to ensure safety. Repairs
and other work by unauthorized
persons could be dangerous.
Before service or maintenance,
disconnect the power supply by
either removing the fuse, "tripping" the
circuit breaker or unplugging the unit.
This equipment has not been
designed for maritime use or for
use in mobile installations such as
Never use a steam cleaner to clean aircraft or recreational vehicles.
the appliance. Pressurized steam
could damage electrical components
and cause a short circuit.
However, under certain circumstances
it may be possible for installation in
these applications. Please contact the
Miele Technical Service Department
with specific requirements.
To protect against fire, electric
shock and injury do not submerge
the cord or plugs in water or other
liquids.
Before the appliance is connected,
the steam selector must be in the
off position to prevent an uncontrolled
escape of steam or hot water and
possible burns.
Do not operate the appliance if the
cord or plug has been damaged,
or if the appliance malfunctions or is
damaged in any way. Please contact
the Miele Technical Service
Always attach the plug to the
appliance first, then plug the cord
into the wall outlet. To disconnect, turn
the program selector to "Off", then
remove the plug from the wall outlet.
Department.
Do not let the cord hang over the
edge of the table or counter, or
touch hot surfaces.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Use
Allow the coffee system to cool
before putting on or taking off
parts, and before cleaning.
The coffee system must be cleaned
daily to prevent the growth of
harmful bacteria and mold. Please
read the "Coffee system care"
section of this manual.
Children should not use the
appliance unsupervised.
Do not use
outdoors.
The use of accessory attachments
not recommended by the
appliance manufacturer may result in
fire, electric shock or injury.
Warning: Danger of scalding. The
liquids dispensed and the nozzles
themselves are very hot.
The hot water and steam
dispensed from the machine could
cause burns. Use these functions
carefully. Never direct the steam nozzle
towards your body or use this machine
to clean objects.
The water lines must be flushed
and the machine cleaned
thoroughly before the first coffee is
prepared.
Only fill the water tank with cold,
fresh drinking water. The water
must be changed daily to prevent
bacteria or mold growth.
To prevent burns, turn the steam
selector to the "o" position when not
needed.
The steam nozzle and hot water
dispensers become very hot
during use. Always grip the steam
nozzle by the insulated collar.
SAVE THESE
INSTRUCTIONS
Do not touch hot surfaces. Use the
handles or knobs.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the coffee system
a Hot water dispenser
b Coffee dispensers (height-adjustable)
c Handle to open appliance front
d Steam selector
e Steam nozzle with milk frother
f Drip catch
g Program selector
h Message window
i Coffee serving buttons
j Rinse/Pre-warm button
k Hot water button
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the coffee system
l Coffee bean container
m Slide control to select the fineness of the ground coffee
n Slide control to select the quantity of ground coffee
o Water tank
p Waste unit
q Brew unit
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Program mode
The coffee system can be customized
to each household through the
"program mode."
To program the appliance:
If a setting is accidentally changed,
turn the program selector to "0ff"
instead of confirming it with ENTER.
The changed setting will not be saved
and the original setting will be retained.
^ Turn the program selector to
"Program mode".
The appliance is now in program mode
and will respond according to the
symbols shown under the coffee
serving buttons.
^ By pressing the - or e button,
– a programming option in the
message window can be highlighted
with an asterisk.
– the settings of the various
programming options can be
adjusted.
^ By pressing ENTER,
– a programming option highlighted
with an asterisk can be selected.
– a change to the programmed
settings is saved.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Choosing a language
The sub-menu will appear in the
message window.
The language for the commands in the
message window should be selected
before the machine is used.
The following languages are available:
English, Spanish, French, German,
Dutch, Portuguese and Italian.
^ Press the e button until the desired
language appears (english, espanol,
francais, deutsch, nederlands,
portugues or italiano).
^ Turn the program selector
counterclockwise to "Program mode."
The following will appear in the
message window:
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
All text in the message window will now
appear in the selected language.
Programming option "LANGUAGE" will
be highlighted with an asterisk.
^ Press ENTER to select this
programming option.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Rinsing feature
The sub-menu will appear in the
message window.
The rinsing feature flushes out coffee
residue and pre-warms the coffee
system. When "Rinsing - On" is selected
the system will automatically be flushed
and pre-warmed when the appliance is
turned on. If this feature is set to
"Rinsing - Off" the system will only be
flushed and pre-warmed when the
rinse/pre-warm button is pressed.
^ Press button e, to turn the "Rinsing"
feature on or off.
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
^ Turn the program selector
counterclockwise to "Program mode."
^ Press the e button, to highlight
"RINSING" with an asterisk.
^ Press ENTER to select this
programming option.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Determining the water
hardness
If the water hardness is greater than
40 gr/gal (700 ppm), the water must
be mixed in equal parts with
The hardness of the water (tap or
bottled) used in the coffee system must
be determined and programmed into
the appliance. The water hardness will
determine how frequently the unit must
be descaled to maintain the coffee
system properly. The machine monitors
the volume of water passing through it
in conjunction with the hardness of the
water and will indicate when descaling
is necessary. Your local water authority
can tell you the hardness of your tap
water or you can measure the hardness
yourself using the enclosed test strip.
non-carbonated mineral water to
prevent excessive limescale
build-up. Never use distilled water.
Program
setting
Water
Hardness
gr/gal
ppm
Hardness 1 1 (soft)
Hardness 2 1 (soft)
Hardness 3 2 (medium)
Hardness 4 3 (hard)
0 - 3
4 - 7
0 - 130
130 - 250
7 - 14 250 - 380
14 - 21 over 380
4 (very hard) over 21
^ Dip the strip in your drinking water for
one second, then shake off excess
water.
The result will be evident after a minute.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Setting the water hardness
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
^ Turn the program selector
counterclockwise to "Program mode."
^ Press the e button to highlight
"WATER HARDN." with an asterisk.
^ Press ENTER to select this
programming option.
The sub-menu will appear in the
message window.
^ Press the e button to set the water
hardness level (hardness 1 - 4).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Setting the drink temperatures Depending on the programming option
selected, the sub-menu is shown in the
message window as follows:
The appliance can be set at different
temperatures to suit varying coffee
drinking preferences.
Five temperature levels are available for
each drink option.
^ Press the e button to set the temp-
erature to minimum, low, medium,
high or maximum.
^ Turn the program selector
counterclockwise to "Program mode."
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
^ Press the e button to highlight a
drink option
"TEMP. L. COFFEE" (long),
"TEMP COFFEE" (regular) or
"TEMP. S. COFFEE" (espresso)
with an asterisk.
A different temperature can be
programmed for each drink.
^ Press ENTER to select the option.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Pre-brewing feature
The sub-menu will appear in the
message window.
When the pre-brewing feature is on, the
freshly ground coffee is moistened with
a little hot water to allow the aroma and
crema of the coffee to fully develop.
When the pre-brewing feature is off, the
hot water is forced through the coffee
immediately.
^ Press the e button to set the
pre-brewing process on, off or to
"long" (an extra long pre-brew).
^ Turn the program selector
counterclockwise to "Program mode."
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
^ Press the e button to highlight
"PREBREWING" with an asterisk.
When making coffee with the
prebrewing feature on, "PREBREWING"
will appear in the message window
after the coffee has been ground.
^ Press ENTER to select this option.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Pre-grinding feature
The sub-menu will appear in the
message window.
The pre-grinding feature allows a new
portion of beans to be ground after
each coffee is dispensed, so there is
always ground coffee ready. This saves
time if coffee is dispensed frequently.
To preserve aroma, the pre-grinding
feature should be turned off when only
preparing coffee occasionally.
^ Press the e button to turn the
pre-grinding feature on or off.
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
^ Turn the program selector
counterclockwise to "Program mode".
^ Press the e button to highlight
"PREGRINDING" with an asterisk.
^ Press ENTER to select this option.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Hot water feature
The sub-menu will appear in the
message window.
When the feature "Programmed hot
water" is turned on, the machine will
dispense a precise, pre-programmed
quantity of hot water when the hot water
button d is pressed. When the feature
is turned off, the machine will dispense
hot water until the hot water button d
is pressed again.
^ Press the e button to set the feature
on or off.
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
^ Turn the program selector
counterclockwise to "Program mode".
^ Press the e button to highlight
"PROG. H. WATER" with an asterisk.
^ Press ENTER to select this option.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Total coffee counter
The number of coffees that have been
dispensed will be displayed in the
message window.
The feature "Total coffee" will display the
number of cups of coffee (espresso,
coffee and long coffee) that have been
dispensed to date.
^ Press ENTER to return to the main
menu.
^ Turn the program selector
counterclockwise to "Program mode."
^ Press the e button to highlight
"TOTAL COFFEE" with an asterisk.
^ Press ENTER to select this option.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Setting the standby timer
The sub-menu will appear in the
message window.
To help create a more energy efficient
coffee system the machine can be set
to power down after a programmed
time period.
The standby time can be set in
15 minute increments up to 3 hours.
The time is measured from the last time
a drink was dispensed.
^ Press the e or - button to select the
required length of time. The time can
be set in 15 minute increments.
^ Press ENTER to save this setting, or
turn the program selector to "0ff" to
cancel if a mistake has been made.
^ Turn the program selector
counterclockwise to "Program mode".
If the rinse feature is set to "On" and a
drink was already dispensed, the
system will be rinsed automatically
before going into standby.
^ Press the e button to highlight
"TIMER" with an asterisk.
^ Press ENTER to select this option.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
System lock
The coffee system can be locked so
that it cannot be used by children or
those not familiar with the operating
instructions.
Deactivating the system lock
Activating the system lock
^ Turn the program selector
counterclockwise to the "Lock"
position.
The following will appear in the
message window:
^ Turn the program selector
counterclockwise to the "Lock"
position.
The following will appear in the
message window:
^ Press and hold the - button for
10 seconds.
The following appears in the message
window:
^ Press and hold the - button for
10 seconds.
The following appears in the message
window:
The machine is now unlocked and
ready for use.
The appliance is now locked and will
not operate. The system will remain
locked and the lighting will remain
turned off even if the program selector
is turned.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using the coffee system
The appliance must be correctly
installed and connected before the
first use. Please see the “Installation
instructions.”
Before using the coffee system, certain
parts need to be cleaned and the water
lines need to be flushed.
^ Hand wash with hot water and liquid
dish soap or if removable place in the
dishwasher:
– coffee bean container,
– coffee and hot water dispensers,
– steam nozzle.
Be aware that with frequent cleaning
in the dishwasher food remnants
e.g. tomato sauce, may cause parts
to discolor.
^ Hand wash with hot water and liquid
dish soap:
– water tank.
^ Rinse thoroughly with warm water:
– brew unit,
– drip sponge.
^ Flush the system twice to make sure
that all water lines are clean.
See "Coffee system care" for more
information.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Water tank
Filling the water tank
The water tank must be washed and
filled with fresh drinking water before
each day of use.
A reminder will appear in the message
window when the unit is first turned on.
^ Open the lid and fill the container
with cold drinking water to within
about 1" (2 cm) of the top.
Never add hot water or any other
liquid except cold water to the water
tank.
^ Close the lid and place the tank in
the machine, pushing it straight
back.
^ Open the front of the machine.
^ Lift the water tank up and out of the
appliance.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee bean container
Filling the coffee bean
container
Only put pure espresso or coffee
beans in the container. Anything else
will damage the grinder, i.e. ground
coffee, hot cocoa, instant coffee, or
treated coffee beans (flavorings,
caramel, or sugar).
Do not remove the coffee bean
container from the appliance unless
it is completely empty, otherwise
coffee beans will spill out.
^ Carefully pull the container out as far
as it will go so that the lid is visible.
Lift the lid.
^ Fill the container with coffee beans to
within about 1" (2 cm) of the top.
^ Close the lid and push the container
back into place.
^ Shut the appliance door.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the serving sizes
The flavor of the coffee depends on the Adjusting the coffee dispensers
type of coffee, how finely the beans are
The height of the coffee dispensers are
ground and the quantity of water used.
adjustable to suit different cup sizes.
To ensure the machine uses exactly the
amount of water to suit your taste and
your cups, there is a choice of three
serving sizes for espresso/coffee.
The espresso button a dispenses a
standard size espresso.
The coffee button b dispenses coffee
for a standard size coffee cup. It uses
the same quantity of ground coffee as
an espresso, but adds more water.
^ Gently pull the dispensers up or
down.
The long coffee button c dispenses
more water, suitable for a large coffee
cup or mug. Only the volume of water is
increased, resulting in a milder flavor.
The volume of water dispensed by
each button can be adjusted to your
taste.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the serving sizes
Coffee and espresso
^ Turn the program selector clockwise
to the "On" position (with or without
lighting).
^ Place a cup under the two coffee
dispensers.
The following will appear in the
message window:
Coffee is always dispensed
simultaneously from both spouts.
^ Press and hold the coffee serving
button appropriate to the size of cup
until the cup is full as desired.
If the machine is cold and the rinsing
feature has been selected, the following
message will then be displayed:
Release the coffee serving button.
The following appears in the message
window during this process:
Once the water is hot, the following
appears in the message window:
The procedure is the same for the other
two coffee serving buttons.
The programmed volume will now be
dispensed every time that coffee
serving button is pressed.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the serving sizes
Hot water
Once the water is hot, the following will
appear in the message window:
To program the volume of hot water
dispensed, the hot water feature must
be programmed "on".
(See "Programming/Hot water feature").
^ Turn the program selector clockwise
to the "On" position (with or without
lighting).
The following will appear in the
message window:
^ Place a cup under the hot water
dispenser.
^ Press and hold the hot water button
d. There will be a few seconds
delay before water is dispensed.
When the cup is full as desired
release the hot water button d.
If the machine is cold and the rinsing
feature has been selected, the following
message will then be displayed:
The following appears in the message
window during this procedure:
If the feature "Prog. hot water" is "off",
the machine will continue to dispense
hot water until the hot water button d
is pressed again.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Pre-warming
Pre-warming the system
The pre-warm feature allows the system
and the cups to be pre-warmed to fully
develop the flavor and aroma of your
coffee.
Pre-warming cups
^ Place a cup or container under the
two coffee dispensers.
^ Place the cup under the hot water
dispenser.
^ Press the rinse/pre-warm button e.
The following will appear in the
message window:
^ Press the hot water button d and
half fill the cup.
^ Press the hot water button d again
to stop.
^ Press ENTER to start the rinsing
process.
^ Leave the cup for a few seconds to
warm, then pour the water away.
Hot water will be dispensed from both
nozzles, warming the system. The
message window will read:
^ Place the empty, pre-warmed cup
under the coffee dispensers, and
prepare the coffee as you normally
would.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Espresso or coffee
Preparing two cups simultaneously
^ Place a cup under both coffee
dispensers.
^ Place a cup under each of the coffee
dispensers.
2x
^ Press the desired coffee button once.
^ Press the desired coffee button twice
in quick succession to bring up two
cups g in the message window.
The coffee will be prepared.
The following message will appear in
the message window, depending on
the button pressed:
The cups will be filled in two stages
with a slight pause in between.
Depending on the serving selected, the
following will appear in the message
window:
If "Pre-brewing" is turned on, the
following will appear in the message
window:
If "Pre-brewing" is on, the following will
appear in the message window after
the grinding process:
Canceling preparation
^ To cancel a coffee being dispensed,
press any one of the coffee buttons to
stop preparation immediately.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Cappuccino
Cold, whole milk is best for creating
froth. This higher the fat content the
better the froth. Ideally it should be
prepared in a cold, stainless steel
pitcher.
^ As soon as steam appears from the
nozzle, shut the steam off by turning
the steam selector clockwise, to the
"o" position.
^ Fill a small, cold, stainless steel
pitcher a third of the way with cold
milk while dispensing espresso.
^ Position the steam nozzle just below
the surface of the milk in the pitcher
and slowly turn the steam selector
counterclockwise.
^ Move the pitcher in circles until a
thick froth appears, then lower the
nozzle deeper into the milk to heat
the rest.
^ Direct the steam nozzle toward the
drip tray and slowly turn the steam
selector counterclockwise.
Do not allow the milk to boil. The
foam will collapse and a skin will
form.
Any condensed water in the nozzle will
be expelled.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
^ Turn the steam off by turning the
steam selector clockwise to the "o"
position.
^ Pull the pitcher away from the steam
nozzle. Carefully pour the milk into
the coffee and spoon some froth onto
the surface.
Always clean the steam nozzle
immediately after use, it is harder to
clean once the milk has dried.
^ Dispense a quick spurt of steam into
an empty cup.
^ Wipe milk off the nozzle with a damp
sponge.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Dispensing hot water
Hot water
^ Place a cup under the hot water
dispenser.
^ Press the hot water button d.
Hot water will be dispensed.
^ Press the hot water button d again
to stop the hot water flow.
The machine will stop automatically
if a volume has been programmed in
for hot water and feature "Prog. hot
water" is activated.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the coffee grinder
Adjusting the coffee grinder
To adjust the grinder setting
To prevent machine damage, the
slide control for the coffee grinder
setting should be moved carefully
and in small adjustments.
– If the espresso flows too quickly into
the cup, the beans have been
^ Push the upper slide control to the
left for finer grinding or to the right for
coarser grinding.
ground too coarsely. The grinder
should be adjusted to a finer setting.
– If the espresso only trickles into the
cup, the beans have been ground
too fine and the coffee will be bitter.
The grinder should be adjusted to a
coarser setting.
You should be able to feel the
notches when moving the slide
control.
If the slide control will not move:
– If the crema is evenly colored but
pale, the ground coffee is too coarse.
^ Close the machine and dispense a
cup of coffee. Then try to move the
slide control again.
– If the crema is very dark brown on
one side, graduating almost to white
on the other, the ground coffee is too
fine.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the coffee grinder
Setting the quantity
To adjust the quantity setting:
Both the flavor and crema of the coffee
depend on the quantity of ground
coffee used. The greater the quantity,
the stronger the flavor will be.
The quality of the crema is also affected
by the quantity:
– If the crema is evenly colored but
pale, increase the quantity setting.
^ Push the lower slide control to the left
to grind less coffee or to the right to
grind more coffee.
– If the crema is very dark brown on
one side, graduating almost to white
on the other, decrease the quantity
setting.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Daily care
The components of the coffee system
must be cleaned after each day of use
to prevent mold and bacteria growth.
At the end of each day, the coffee
dispensers and the brew unit must be
flushed clean.
^ The following components can either
be hand washed with hot water and
liquid dish soap or placed in the
dishwasher if removable:
,Warning! Allow the appliance to
cool before cleaning. Hot surfaces
can cause burns.
– coffee and hot water dispensers,
– steam nozzle,
– waste unit,
– metal grate and plastic tray,
– drip catch.
^ Press the Rinse/pre-warm button.
The message window will read:
Be aware that with frequent cleaning
in the dishwasher food remnants
e.g. tomato sauce, may cause parts
to discolor.
^ Hand wash with warm water and
liquid dish soap:
^ Press ENTER and the display will
– water tank.
change to:
^ Rinse thoroughly with warm water:
– brew unit,
– drip sponge.
Hot water will flow through and clean
the brew unit and coffee dispensers.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Exterior
Interior
^ The exterior can be cleaned with hot
water and liquid dish soap applied
with a soft sponge. Do not use
The interior can be cleaned with hot
water and liquid dish soap. Wipe dry
using a soft cloth.
abrasive cleansers or scrubbers.
^ Wipe dry using a soft cloth.
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
A funnel is situated on the inside of the
door. A sponge under this funnel
catches drips. Rinse the sponge after
each day of use.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored
controls
These controls may become discolored
or damaged if not cleaned regularly
with hot water and liquid soap.
Do not use a stainless steel cleaner on
these controls.
Wipe up any spills of descaling
solution immediately!
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Drip catch
The drip catch has a red float that will
rise when the catch is full. The catch
should be cleaned when the float rises
and at the end of each day to prevent
spills and odors.
^ Take the drip catch out of the
appliance. Clean it by hand with
warm water and liquid dish soap or
place in the dishwasher.
^ Dry all parts and replace them in the
reverse order.
^ Close the door.
^ Remove the metal grate and plastic
tray from the drip catch and clean by
hand with warm water and liquid dish
soap or place in the dishwasher. Be
careful not to loose the red float.
^ Open the appliance door.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Waste unit
Steam valve
Clean the steam valve after every use, it
becomes harder to clean once the milk
has dried.
^ Lift the waste unit up and out.
^ Clean the waste unit by hand with hot
water and liquid dish soap or place in
the dishwasher.
^ Loosen the upper screw, a, and pull
the sleeve of the steam valve down,
b.
^ Clean the sleeve with warm water
and liquid dish soap (or in the
dishwasher) and dry.
^ Push the waste unit back into place,
positioning it over the notches.
If "WASTEUNIT MISSING" appears
in the message window after
cleaning, the waste unit was not
seated correctly. Reposition the unit.
Close the door and press ENTER.
^ Push the sleeve onto the steam
nozzle, a, and tighten the screw, b.
The appliance will not operate when
this message appears.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Brew unit
^ Dry the funnel to prevent ground
coffee from sticking.
Clean the brew unit by hand only.
The moving parts and the rubber
gaskets cannot be cleaned in a
dishwasher.
^ After cleaning press "PRESS".
Lubricate the brew unit with the
enclosed silicon every 500 cups
(see "Lubricating the brew unit").
^ Remove the waste unit. The brew unit
can only be removed after the waste
unit has been taken out.
^ Push the brew unit in the track
straight into the appliance without
pressing "PRESS" until it clicks into
place.
^ Hold the brew unit with the handle
and press down with your thumb on
"PRESS".
^ Pull the brew unit out.
^ Clean the brew unit thoroughly under
running warm water. Do not use
detergent.
^ Rub away any coffee residues from
the filters with a sponge.
One filter is in the funnel, the second is
to the left of the funnel. The second
filter is removable (see "Cleaning the
brew unit filters".)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Rinsing cycle:
The display will read:
Degreasing the brew unit
The natural oil found in coffee can
cause the brew unit to clog. The
message "Rinsing cycle" will flash in the
message window after 500 cups to
remind you to clean the unit with the
enclosed detergent tablets. These
cleaning tablets can be purchased
from your Miele dealer or the Miele
Technical Service Department.
^ Press e, to select "Rinsing cycle" with
the asterisk.
^ Remove the waste unit.
^ Press ENTER.
The display will read:
A small amount of water will flow out of
the coffee dispensers. After a pause
more water will flow out. This process
will run 4 times, dispensing 2 cups (17
oz) of hot water. The whole process will
take about 5 minutes.
^ Take out the brew unit and put the
detergent tablet in the brew unit
funnel.
^ Return the brew unit and waste unit
to the appliance and close the door.
^ At the end of the cleaning cycle the
^ Set a 3 cup (25 oz) container under
display will read:
the coffee dispensers.
The brew unit is now clean and ready to
use.
^ Press the rinse/pre-warm button e.
(The unit must be pre-heated and
ready to use otherwise the button will
not respond.)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Cleaning the brew unit filters
^ Wipe away any coffee residues from
the steel filter in the funnel of the
brew unit with a sponge.
The chrome filter to the left of the
funnel can be removed for thorough
cleaning. Check and clean the chrome
filter regularly.
^ Remove the brew unit.
^ Fit the enclosed allen wrench to the
connection point (see illustration) in
the brew unit. Turn it
counterclockwise while supporting
the chrome filter from below.
^ Remove the chrome filter with the
screw.
^ Clean the filter with hot water and dry.
^ Return the chrome filter to the brew
unit and secure it by turning the allen
wrench clockwise. Press slightly
against the filter to allow threading.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Lubricating the brew unit
^ Remove the brew unit.
^ Clean and lubricate the bolt, a, and
the joints, b.
^ Return the brew unit to the appliance.
Check that the brew unit is in the basic
position with the funnel slightly lifted
and the socket in the vertical position
(see illustration).
^ Lubricate the joints, a, the axle, b,
the tracks, c, and the gasket, d,
with silicon grease.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Resetting the brew unit’s basic Change the gaskets
position:
^ Press on the latch, a, and press the
funnel down, b.
^ If a leak occurs change the gaskets.
Three gaskets are enclosed with the
machine. One gasket is located
between the steam valve and the
sleeve. The other two gaskets are
located behind the brew unit at the
water feed tube.
^ Push the connection piece to the far
left, c.
^ Press "PRESS" once.
The basic position shown above is
reset and the brew unit can be set back
into the machine.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee system care
Changing the light bulb
^ Open the appliance door.
Before changing the light bulbs,
disconnect the appliance from the
power supply by either removing the
fuse, unplugging it, or manually
"tripping" the circuit breaker.
When in use the halogen bulbs
become extremely hot, and they can
burn your hands. Do not attempt to
change the bulbs until they have
had sufficient time to cool.
^ Insert a small screw driver into the
opening and carefully press up, a.
^ At the same time pull the light cover
down, b.
Do not touch the bulb surface.
Fingerprints or body oils deposited
on the bulb will decrease its life.
Please follow the bulb
manufacturer’s instructions.
^ Pull the old bulb out of its socket.
^ Replace with a new bulb
(12 V, 5 watts).
^ Close the lamp cover.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Descaling the appliance
The coffee system must be descaled
regularly. The time period depends on
the water hardness set. The appliance
will display a reminder message and
will eventually lock if not descaled.
^ Add 2 liters of water to the water
tank. Dissolve two of the enclosed
descaling tablets in the water.
^ Close the water tank and insert into
position.
The message window will first display:
"DESCALE AFTER COFFEES: 100“.
^ Close the door.
The descaling will take place in the
automatic descaling program.
Automatic descaling
This message will appear until the
appliance is descaled or locks. When
the count is down to zero, the
appliance will lock and the message
window displays:
^ Turn the program selector
counterclockwise to the "Program
mode" position.
The appliance can only be used again
once descaling has been performed.
Let the machine cool before
descaling. Remove the sleeve of the
steam nozzle to avoid damage from
the descaling agent.
Only use the enclosed descaling
tablets for descaling.
^ Press e, to select "Descaling" with
the asterisk.
The descaling tablets are specially
designed for descaling this coffee
system. Other agents may damage
the machine and affect the taste of
the coffee and hot water. The
descaling tablets can be purchased
from Miele.
^ Press ENTER.
To prevent damage to the exterior of
the machine wipe up any descaling
solution spills immediately!
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Descaling the appliance
The message window will read:
The coffee system will begin the
automatic descaling. The display will
read:
Do not open the door during
descaling and do not turn the
program selector to "0ff". This will
interrupt the descaling process. If
the process is interrupted, add water
to the reservoir, turn the program
selector back to "Program mode"
and close the door. Also, empty the
containers under the dispensers and
steam nozzle as more water will be
expelled.
^ Place a 1 liter container below the hot
water dispenser.
The pump will introduce a small amount
of descaling solution into the system,
then rest briefly to allow the solution to
take effect. The process lasts about
30 minutes.
Throughout the process, check the
collecting containers to make sure that
they do not overflow.
^ Place a 1 liter container below the
steam nozzle and turn the steam
selector counterclockwise.
When descaling is complete, the
display will read:
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Descaling the appliance
When the water tank is empty, the
display will read.
^ Turn the steam selector clockwise to
the "o" position.
^ Turn the steam selector clockwise to
position "o" and press ENTER.
^ If the program selector is on
"Program mode", the display will
read:
^ Press ENTER.
The display will read:
The unit is now descaled and ready for
use.
The machine needs to be rinsed to
clean out the descaling residue.
^ Fill the water tank three quarters of
the way with cold water and place it
back into the machine.
^ Place the empty 1 liter containers
below the hot water dispenser and
the steam nozzle and turn the steam
selector counterclockwise.
^ Allow the water to run through the
spout and nozzle completely.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Fault messages
If an error occurs a fault message will appear. With the following guide, minor
problems can be fixed without a service call.
Message
Possible fault
Fix
Fill coff. beans
Ready for use
Coffee bean container is empty.
Refill with coffee beans.
Brew unit block.
Brew unit miss.
Descale
The brew unit is clogged.
Clean the brew unit.
The brew unit is not properly seated.
The unit needs to be descaled.
Take out the brew unit and reseat.
Descale the unit.
Expel air
Air has built up in the system. The unit
is blocked.
– Fill the water tank.
– Turn the program selector to "On with
light" and place containers below the
hot water dispenser and the steam
nozzle.
– Press the hot water button, turn the
steam selector counterclockwise
and let water run out until it streams
steadily.
– Press the hot water button again.
Turn the steam selector to "o" to shut
off the water.
Fresh water?
A reminder to fill the water tank with
fresh water.
Waste unit miss.
The waste unit is missing or not seated Return or reposition the waste unit.
properly.
Empty waste unit The waste unit is full. The system will
Empty waste unit and press ENTER.
press ENTER.
not dispense coffee until the waste unit
is emptied.
Energy-save
mode . . .
The unit is in the energy-save mode.
Light is off.
Press ENTER.
press ENTER
Watersystem
fault
There is a problem in the water lines.
Call Miele Technical Service.
Fill watertank
The water tank is empty or missing or
the float in the water tank is stuck.
Empty water tank, rinse, fill with fresh
water and replace.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if...
Possible fault
Fix
. . . there is no prompt The unit has no
Is the door closed?
in the message
window?
power.
Check that the circuit has not
tripped, the fuse has blown or
that the appliance is unplugged.
Otherwise contact the Miele
Technical Service Department.
. . . the light does not – Is the door open?
If not, the light bulb has burned
out.
See "Changing the light bulb".
illuminate?
– Is the unit in
standby mode?
– Is the unit locked?
. . . nothing comes out The steam nozzle is
of the steam nozzle? clogged.
Carefully poke the opening with
a thin, short needle or toothpick.
. . . the grinding is
louder that normal?
There could be
pebbles among the
coffee beans.
Immediately turn off the unit.
Call the Miele Technical Service
Department.
. . . there is a low
grinding noise?
The coffee bean
container is empty. A the coffee bean container.
message appears in
Wait until the sound stops. Refill
the message window.
. . . the display shows The grinder has
Turn the coffee system off and
let the grinder cool.
"Fill coff. beans
overheated. This
happens after
Ready for use" but
there are still beans in brewing 40 cups in
the coffee bean
container?
quick succession.
. . . the unit suddenly Is the door closed?
Close the door properly.
turns off?
The water temp-
erature could be too
high.
The unit stops until the water
has cooled.
There could be stones In this case the unit shuts off
in the coffee beans.
after 20 secs. to prevent
damage. Call Technical Service.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if...
Possible fault
Fix
. . . the espresso is
dispensed too
quickly?
The grinder is set to Select a finer setting.
too coarse of a
setting.
. . . the espresso is
dispensed too
slowly?
The grinder is set to Select a coarser setting.
too fine of a setting.
. . . the coffee is not
hot enough?
Was the system
warmed?
Pre-warm the system and cups.
Check the temperature setting of
the coffee selected.
Check if the brew unit is clogged.
Clean the brew unit.
. . . coffee was not
dispensed although
the beans were
Was the grinder set The grinding process might have
to the finest and to taken too long not allowing time for
the maximum
brewing.
ground and the water quantity of coffee? Set the grind size or the grinding
tank is full?
amount to a different position.
. . . the descaling
process was started
accidently?
Press ENTER once.
The program will stop.
If descaling agent is in the water
tank, empty the water tank and
rinse thoroughly with fresh water to
clean away any descaling agent.
The descaling process cannot be
canceled once the steam selector
is turned. The process must be
completed. This is a safety feature
so that the unit descales
completely.
. . . the warm up time The unit needs
Descale the machine.
is longer, less water
is dispensed and the
machine is not
descaling.
See "Descaling the appliance."
working properly?
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if...
Possible fault
Fix
. . . no water runs out of The brew unit is clogged. Clean the brew unit filters.
the dispensers?
. . . there is no crema?
Check if the grinder is set Adjust the coffee grinder
to the coarsest or finest
setting.
setting.
The coffee is not fresh.
Use fresh coffee beans.
The coffee dispensers are Lower the height
set too high.
adjustable dispensers.
Check the temperature
setting of each drink
option.
If the temperature is too
high, the crema will
collapse.
. . . the grinder setting
slide won’t move?
Coffee beans are
blocking movement.
Close the unit and
dispense a coffee.
The slide control can now
be moved.
. . . water appears in the This is not a fault. This is
waste unit?
water residue from the
cleaning process.
. . . the brew unit cannot The brew unit is only
Close the door and turn
the appliance on.
be removed?
accessible, when the
waste unit is removed.
The brew unit will
reposition itself to the
basic position.
If the brew unit cannot be
removed even when the
waste unit is removed it is
not in the basic position.
. . . the brew unit cannot The brew unit is not in the The funnel must be lifted
be pushed into the
appliance?
basic position.
up and the connection
piece must be in an
upright position.
See "Coffee system care/
Resetting the basic
position."
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if the display shows the
alternating messages "RINSING
CYCLE" and "SELECT PRODUCT
READY FOR USE"?
The display will read:
This is a reminder to run the rinse cycle
before the next use.
To clear the message a rinse cycle
must be run.
^ Press e, to select "Rinsing cycle" with
an asterisk.
^ Fill the water container with fresh tap
water.
^ Set a container (34 ounces [1 liter])
under the spouts.
^ Press ENTER.
^ Press the rinse button.
The rinse cycle lasts about 5 minutes.
When complete, the coffee system is
ready to use.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of a fault which you cannot
correct yourself please contact the
Miele Technical Service Department.
U
1-800-999-1360
V
1-800-565-6435
When contacting the Technical Service
Department, please quote the model
and serial number of your appliance
given on the data plate inside the
appliance.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of packing material
Disposal of an old appliance
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Please recycle.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Important
All electrical work should be
The coffee system comes equipped
with a 6 ft (1.8 m) power cord with a
NEMA 5-15P molded plug for
connection to a 120 V, 15 A, 60 Hz
power supply.
performed by a qualified electrician
in strict accordance with national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held responsible for
unauthorized work.
Ensure that power is not supplied to
the appliance while installation or
maintenance work is performed.
Verify that the voltage, load and circuit
rating information found on the data
plate, match the household electrical
supply before installing the coffee
system.
If there is any question concerning the
electrical connection of this appliance
to your power supply, please consult a
licensed electrician or call Miele’s
Technical Service Department.
U
V
1-800-999-1360
1-800-565-6435
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
A speciality display cabinet is also available from your dealer or Miele’s Technical
Service Department as an installation option.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
,Make sure power is not supplied
to the appliance while installation or
maintenance work is performed.
Disconnect the power supply to the
work area by unplugging the unit,
tripping the circuit breaker or
removing the fuse.
The coffee system must be installed
into cabinetry before being used.
^ Plug the appliance into the electrical
outlet.
^ Carefully turn the lower screws, a, to
center the machine in the cabinet.
^ Push it all the way back into the
cabinet, until there is resistance.
^ To secure the appliance in the
cabinet, tighten the upper screws, b,
carefully by hand. Do not use an
electric screwdriver.
^ Open the front of the machine and
partially tighten the screws.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Coffee glossary
Arabica is a high quality coffee bean. It Cappuccino scuro is a "dark"
is long and flat and with a groove
running around it. The caffeine content
is between 0.8 and 1.3 %. It is strong
and aromatic, but less bitter than the
Robusta bean.
cappuccino with more espresso and
less hot milk.
Cappuccino senza schiuma is a
cappuccino without the froth.
Crema is the sign of the perfect cup of
espresso - a fine, nut or cinnamon
brown foam on the surface of the
espresso, which is only created when
the pressure is sufficiently high. The
crema contains foamed oils which are
rich in flavor and aroma.
Caffè is the Italian term for a standard
espresso.
Caffè americano is a thin espresso
with water added.
Caffè corretto is espresso with a dash
of something stronger such as a
liqueur.
Espresso, see Caffè.
Caffè freddo is iced espresso. An
extended version of espresso served
with ice.
Espresso corto is a "short", strong
espresso.
Espresso doppio is a double portion of
Caffè latte is a double espresso in a
large cup filled with hot milk, topped
with little or no foam.
espresso.
Espresso lungo is a longer, less
concentrated version of espresso
served in a standard coffee cup.
Caffè mocha consists of one third
espresso, one third hot milk and one
third cocoa.
Espresso ristretto is a double
strength, bitter tasting espresso.
Caffè ristretto is the strongest most
concentrated espresso. The water is
reduced to 2 tablespoons (30 ml) per
serving.
Macchiato is espresso with a dollop of
hot, foamed milk giving a dappled
(macchiato) appearance.
Pre-warming the cups is
recommended to prevent the espresso
from cooling too quickly.
Caffeine - the caffeine content of
espresso is only a third or half the
caffeine found in coffee. The stronger
the roast, the less caffeine the espresso Robusta is a round and convex coffee
will contain.
bean with an almost straight groove.
The caffeine content is around 2 to
2.5%. It is more bitter than the Arabica
bean.
Cappuccino is espresso with frothed
milk. It is equal parts espresso, hot milk
and foam.
Cappuccino chiaro is a "light"
cappuccino with less espresso and
more hot milk.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 44 / USA/CDN - 5204
M.-Nr. 06 494 750 / 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|
