Miele Coffeemaker CVA 5060 User Manual

Operating and installation instructions  
Built-in coffee machines  
CVA 5060  
CVA 5068  
en - GB  
To avoid the risk of accidents  
or damage to the machine,  
it is essential to read these  
instructions before it is installed  
and used for the first time.  
M.-Nr. 09 248 830  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Settings: Customising your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Selecting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Setting the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Setting the timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Coffee jug (making several cups one after the other) . . . . . . . . . . . . . . . . . . . . . . 31  
Setting the amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Setting Pre-brewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Setting Automatic rinsing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Setting Eco mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Lighting: Setting the brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Lighting: Setting the switch-off time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Info (showing the number of drinks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Safety (activating the System lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
To activate or deactivate the system lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
To override the System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Setting the water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Setting the volume (keypad tone, buzzer). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Activating the plate warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Showroom programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Resetting the factory default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Miele|home. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Programming the amount: setting the portion sizes . . . . . . . . . . . . . . . . . . . . 41  
Programming the amount of espresso, coffee, hot milk and milk froth  
via the OK sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Programming the proportions for cappuccino or latte macchiato  
via the OK sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Programming the amount for hot water via the Hot water sensor . . . . . . . . . . . . . 43  
Programming the amount via "Settings". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Setting up User profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Selecting a User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Creating a User profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Changing a User profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Deleting a User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Revert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Rinse the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Milk pipework. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Rinse milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Clean milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Clean milk pipework of any blockages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Stainless steel milk flask with lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Central spout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Central spout connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Interior and machine door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Degreasing the brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Descaling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
To run the descaling programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Electrical connection U.K., ZA, IRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Building-in and combination options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Adjusting the door hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the environment  
Disposal of the packing  
material  
Disposal of your old machine  
Electrical and electronic machines  
often contain materials which, if  
handled or disposed of incorrectly,  
could be potentially hazardous to  
human health and to the environment.  
They are, however, essential for the  
correct functioning of your machine.  
Please do not therefore dispose of it  
with your household waste.  
The transport and protective packing  
has been selected from materials which  
are environmentally friendly for  
disposal, and should be recycled.  
Ensure that any plastic wrappings,  
bags, etc. are disposed of safely and  
kept out of the reach of babies and  
young children. Danger of suffocation.  
Please dispose of it at your local  
community waste collection/recycling  
centre, or contact your Dealer for  
advice. Ensure that it presents no  
danger to children while being stored  
for disposal.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the machine  
Exterior view  
aOn/Off sensor for switching the coffee machine on and off  
bDisplay  
cLeft arrow, for scrolling through the various programme options  
dOK sensor, for confirming the selection of a programme option and for saving a  
setting  
eRight arrow, for scrolling through the various programme options  
fSensor for selecting hot water  
gDoor grip  
hHot water spout  
iLighting  
jDrip tray cover  
kCentral spout, height-adjustable  
lStainless steel milk flask  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the machine  
Interior view  
aMaster switch  
bGround coffee chute cover  
cGround coffee chute  
dSlide control to select fineness of ground coffee  
eCoffee bean container  
fDrip tray with grid for easier carrying  
gWater container  
hBrew unit  
iWaste container  
jCentral spout connector (connecting the brew unit and the central coffee spout)  
kStainless steel milk flask  
lCentral spout connector cap  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories supplied  
Stainless steel milk flask  
For storing and keeping milk cold, with lid (with handle) and  
additional cap  
(not suitable for cleaning in a dishwasher)  
Containers  
Large and small containers for cleaning and rinsing the milk  
pipework  
Coffee spoon  
For adding the correct amount of ground coffee  
Cleaning agent for milk pipework  
For daily cleaning of the milk pipework  
Cleaning tablets  
For degreasing the brew unit  
Descaling tablets  
For descaling the water pipework  
Other accessories and spare parts  
– Test strips for determining the water hardness level  
– Air intake tube for placing on the central spout  
– Silicone grease for lubricating the cap on the central spout  
connector  
– Brush for cleaning the milk pipework  
– Mains connection cable  
– Central spout connector cap  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional accessories  
Miele accessories and cleaning and conditioning products  
are available for your coffee machine.  
These can be ordered via the internet at  
or from your Miele Dealer.  
Stainless steel milk flask with cap  
For storing and keeping milk cold  
(not suitable for cleaning in a dishwasher)  
Cleaning agent for milk pipework  
For daily cleaning of the milk pipework  
Cleaning tablets  
For degreasing the brew unit  
Descaling tablets  
For descaling the water pipework  
E-Cloth (microfibre cloth)  
Removes finger marks and light soiling  
Silicone grease  
For lubricating the cap on the central spout connector  
Miele|home  
With Miele|home, the coffee machine becomes a  
communication-enabled appliance which can be monitored  
or operated via a PC or mobile phone. For further information,  
please contact Miele.  
<
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Correct application  
This coffee machine conforms with  
all relevant legal safety  
his coffee machine is not designed  
~
for commercial use. It is intended for  
use in domestic households and similar  
working and residential environments.  
The appliance is not intended for  
outdoor use.  
requirements. Improper use can,  
however, lead to personal injury and  
damage to property.  
To avoid the risk of accidents and  
damage to the machine, please  
read these instructions carefully  
before using it for the first time.  
They contain important information  
on installation, safety, use and  
maintenance. Miele cannot be held  
liable for damage caused by  
It must be used as a domestic  
~
appliance and only for the preparation  
of espresso, cappuccino, latte  
macchiato etc.  
The appliance can only be used by  
~
people with reduced physical, sensory  
or mental capabilities, or lack of  
non-compliance with these Warning  
and Safety instructions.  
experience and knowledge, if they are  
supervised whilst using it, or have been  
shown how to use it in a safe way and  
understand the hazards involved.  
Keep these instructions in a safe  
place and ensure that new users are  
familiar with the content. Pass them  
on to any future owner.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Safety with children  
Technical safety  
Before setting up the machine,  
~
,Caution. The spouts present a  
check it for any externally visible  
danger of burning or scalding.  
damage. Do not install or attempt to  
Children's skin is very sensitive and  
reacts to hot temperatures.  
Do not allow them to touch hot  
components of the coffee machine  
or to put their hands under the  
spouts.  
use a damaged machine. Danger of  
injury.  
To avoid the risk of damage to the  
~
machine, make sure that the rating on  
the data plate corresponds to the  
voltage and frequency of the household  
Place the coffee machine where it is supply, before connecting the machine  
~
out of the reach of children.  
to the mains supply. Consult a qualified  
electrician if in any doubt.  
Children under 8 years of age must  
~
be kept away from the machine unless  
they are constantly supervised.  
The electrical safety of this machine  
~
can only be guaranteed if correctly  
earthed. It is most important that this  
basic safety requirement is observed  
and tested regularly, and where there is  
any doubt the household wiring system  
should be inspected by a qualified  
electrician.  
Children 8 years and older may use  
~
the appliance only if they have been  
shown how to use it in a safe way and  
understand the hazards involved.  
Children must not be allowed to  
~
clean or maintain the appliance  
unsupervised.  
The manufacturer cannot be held liable  
for the consequences of an inadequate  
earthing system (e.g. electric shock).  
The coffee machine is not a toy! To  
~
prevent the risk of injury do not allow  
children to play with it or its controls.  
The machine must only be operated  
~
when built in, to ensure that all  
electrical components are shielded.  
Ensure power is not supplied to the  
machine until after installation, repair  
work or maintenance work has been  
carried out.  
Remember that coffee and espresso  
are not suitable drinks for children.  
Danger of suffocation. Packaging,  
~
e.g. cling film, polystyrene and plastic  
wrappings, must be kept out of the  
reach of babies and children.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Do not connect the machine to the  
While the machine is under  
~
~
mains electricity supply by a  
multi-socket adapter or an extension  
lead.  
guarantee, repairs should only be  
undertaken by a service technician  
authorised by the manufacturer.  
Otherwise the guarantee will be  
invalidated.  
These do not guarantee the required  
safety of the machine (e.g. danger of  
overheating).  
Faulty components must only be  
~
The second electrical connection  
replaced by genuine Miele original  
spare parts. The manufacturer can only  
guarantee the safety of the machine  
~
socket on the back of the CVA 5060  
coffee machine may only be used for  
connecting a Miele EGW 4000-14, EGW when Miele replacement parts are  
4000-29 or EGW 5000-14 plate warmer. used.  
Connecting any other appliance would  
The machine must be disconnected  
~
damage the machine.  
form the electricity supply during any  
If the coffee machine is installed  
repair work or cleanng.  
~
behind a furniture door, it must not be  
used with the door closed. Do not close  
the furniture door while the coffee  
machine is in use.  
Never open the outer casing of the  
~
machine. Tampering with electrical  
connections or components and  
mechanical parts is highly dangerous  
to the user and can cause operational  
faults or electric shock.  
Ensure that there is sufficient  
~
ventilation around the coffee machine.  
The ventilation gaps in the furniture  
housing unit and the gap between the  
top of the housing unit and the ceiling  
must be at least 200 cm². Otherwise  
condensation can build up and  
damage the machine or the housing  
unit.  
If the coffee machine is to be built in  
~
above another appliance, there must  
be a full-width, closed shelf between  
them (except when it is combined with  
a Miele built-in plate warming drawer).  
In areas which may be subject to  
~
infestation by cockroaches or other  
vermin, pay particular attention to  
keeping the machine and its  
The coffee machine must not be  
~
used in a non-stationary location (e.g.  
on a ship).  
surroundings in a clean condition at all  
times. Any damage which may be  
caused by cockroaches or other vermin  
will not be covered by the guarantee.  
Installation, maintenance and  
~
repairs should only be carried out by a  
suitably qualified and competent  
person in accordance with local and  
national safety regulations. Repairs and  
other work by unqualified persons  
could be dangerous and the  
manufacturer will not be held liable.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Correct use  
– Change the water every day to  
prevent a build-up of bacteria.  
,Caution. The spouts present a  
– Do not use mineral water. Mineral  
danger of burning or scalding. The  
liquids and steam dispensed are  
very hot.  
water will cause serious limescale  
deposits to build up in your machine  
and damage it.  
Please note:  
Do not use water from a reverse  
~
osmosis system in this machine. This  
would damage it.  
– Keep well away from the area  
underneath the spouts when hot  
liquids and steam are being  
dispensed.  
Never put anything other than  
~
roasted espresso/coffee beans in the  
coffee bean container. It must never be  
filled with ground coffee as this could  
damage the grinder.  
– Do not touch hot components.  
– The spouts can spray hot liquid or  
steam.  
The ground coffee chute must never  
~
– Water in the drip tray can be very  
hot. Take care when emptying it.  
be filled with anything other than  
ground coffee or brew unit cleaning  
tablets. Otherwise the machine will be  
damaged.  
,Danger of injury. Do not touch  
the brew unit when the appliance is  
connected to the electrical supply.  
Do not use milk with additives.  
~
Sugar additives will adhere to the milk  
pipework and damage the machine.  
,Never look directly at the lighting  
Sugar will damage the machine.  
~
or use optical instruments to look at  
it.  
Do not use coffee beans which have  
been treated with anything containing  
caramel, any kind of sugar or any other  
substances. Do not put drinks  
containing sugar, or instant coffee in  
the machine.  
Clean the coffee machine and the  
stainless steel milk flask thoroughly  
before using for the first time (See  
"Cleaning and care").  
Never place a drink with ignited  
~
alcohol under the central spout of the  
coffee machine. The flames could ignite  
plastic components and cause fire  
damage.  
Please note the following regarding  
~
water:  
– Only use cold, fresh tap water to fill  
the water container. Warm or hot  
water or other liquids could damage  
the machine.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Hot water and steam could cause  
Used coffee grounds should be put  
~
~
scalding. Be very careful when using  
these functions. Make sure you do not  
come into contact with steam or hot  
water. The machine must not be used  
for cleaning objects.  
with the organic rubbish or on the  
compost heap, but not emptied down  
the sink, as they could block it.  
Do not swing from or hang anything  
~
on the door when it is open as this  
Do not use a steam cleaner to clean could damage the machine.  
~
this machine. Steam could reach  
electrical components and cause a  
short circuit.  
The machine is designed to be used  
~
in areas with an ambient temperature of  
+15 °C to +60 °C. Please do not use it  
anywhere with an ambient temperature  
Clean the machine every day to  
~
prevent a build-up of bacteria. All parts outside this range.  
except for the brew unit, coffee bean  
container, the stainless steel milk flask  
and lid, and the cover of the central  
spout are dishwasher safe.  
For machines with a stainless steel  
front:  
Do not use sticky notes, transparent  
~
The machine should be descaled  
adhesive tape, masking tape or other  
~
regularly, depending on the hardness  
of the water, with the descaling tablets  
supplied. The harder the water, the  
more often the machine must be  
descaled. The manufacturer cannot be  
held liable for damage arising from  
insufficient descaling.  
types of adhesive on the stainless steel  
front. These damage the surface,  
causing it to lose its dirt repellent  
protective coating.  
The surface of the stainless steel front  
is susceptible to scratching. Even  
magnets can cause scratching.  
Only use the descaling tablets  
~
The manufacturer cannot be held  
liable for damage caused by  
non-compliance with these Warning  
and Safety instructions.  
supplied by Miele and follow the  
instructions on the packet carefully.  
Use the exact proportions  
recommended. Otherwise the machine  
will be damaged.  
Depending on the natural oil content  
~
of the coffee used, the brew unit could  
become blocked. It is important  
therefore to clean the brew unit with a  
cleaning tablet after approx.  
200 coffees. (A reminder will appear in  
the display).  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the coffee machine - first steps  
The following notes should help you get G Maintenance programme for milk  
to know your coffee machine before  
starting to use it.  
pipework, brew unit, descaling,  
rinsing  
C
Settings: Customising your  
machine  
Controls  
This machine has sensor controls which  
react to touch. To operate the machine,  
you only need to touch the relevant  
sensor. There are five sensors:  
^ The arrow sensors are used to select  
a programme option in the display.  
Touch the OK sensor when the option  
you want appears highlighted in the  
display.  
s
On/Off sensor: For switching the  
machine on or off  
Before using for the first time  
< > Left/right arrows:  
For scrolling through the various  
programme options  
The machine must be correctly  
installed and connected (see  
"Electrical connection" and  
OK sensor: For confirming the  
selection of a programme option  
and for saving a setting  
"Installation") before it is used for the  
first time. It must then be cleaned  
(see "Cleaning and care").  
-
Hot water sensor  
Remove any protective foil from the  
front of the machine.  
Display  
Switching on  
Espresso  
^ Touch the On/Off sensor s to switch  
on the machine.  
q
r
H
I
J
L
The following symbols come up in the  
n
m
C
When the machine is switched on for  
the first few times with the master  
switch, a welcome screen and some  
other messages will appear briefly. The  
welcome screen will be displayed each  
time the machine is switched on until 5  
drinks have been prepared.  
display in the main menu:  
q
r
H
I
Espresso  
Coffee  
Cappuccino  
Latte Macchiato  
Hot milk  
J
Míele  
Willkommen  
L
n
Milk froth  
User profile for up to 9 different  
users  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the coffee machine - first steps  
When you use the machine for the very If everything has been entered  
first time, you will be prompted to  
correctly, Set up successful will  
select a language.  
appear in the display.  
^ Use the right or left arrow until the  
language you want appears in the  
display.  
^ Confirm this message by touching  
the OK sensor.  
To get the best out of your  
coffee machine and to set it  
^ Touch the OK sensor.  
The language you have chosen is  
now set.  
up for your specific  
requirements, please continue to work  
through these operating instructions.  
The request to set the clock format will  
then appear.  
Switching off  
^ Use the arrows to select the clock  
format you want (12 h or 24 h), and  
then touch the OK sensor.  
^ Touch the On/Off sensor s to switch  
off the machine.  
^ Enter the time of day: First set the  
hour with the arrow sensors and then  
touch the OK sensor. Then set the  
minutes in the same way.  
^ Now decide when you want the time  
of day to be displayed, and press the  
OK sensor.  
"On": The display will always show  
the time of day (even when the  
machine is switched off).  
"On for 60 seconds": The display  
will show the time for 60 seconds,  
and then go dark after the machine  
is switched off.  
"Do not display": The display will  
only show the time of day when the  
machine is switched on, and will go  
dark as soon as it is switched off.  
^ Touch the OK sensor to confirm that  
your machine is communication  
enabled.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Filling the water and coffee bean containers  
The coffee machine must be  
cleaned thoroughly (see "Cleaning  
and care") before you fill it with water  
and coffee beans.  
It is vital that you programme in  
the water hardness level of your  
water (see "Settings: Customising  
your machine - Setting the water  
hardness").  
^ Pull the water container forwards to  
remove it.  
Filling the water container  
^ Remove the lid, and fill the water  
container with cold, clean tap water  
up to the "Max." mark.  
The quality of the water plays  
an important part in the  
overall quality of the coffee.  
The water container should therefore be  
emptied and filled with fresh tap water  
every day.  
A valve at the front of the water  
container will ensure that water  
cannot escape.  
^ Put the lid back on and replace the  
container in the machine, pushing it  
right to the back until it clicks into  
position.  
Hot water and other liquids could  
damage the machine. Only use  
cold, clean tap water and fill the  
machine every day. Do not on any  
account use mineral water. Mineral  
water will cause serious limescale  
deposits to build up in your machine  
and damage it.  
The water container must click into  
position and sit in the machine  
correctly to ensure the valve is  
sealed. If you do not hear it click into  
position or the water container  
protrudes slightly or does not sit flat  
on the floor, check whether the  
surface that the water container sits  
on is dirty and clean it if necessary.  
^ Open the machine door.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Filling the water and coffee bean containers  
Filling the coffee bean  
container  
Only put roasted espresso or coffee  
beans in the container. Anything  
else, including ground coffee, will  
damage the grinder.  
Do not use coffee beans which have  
been treated with caramel, sugar or  
other substances. Do not put drinks  
containing sugar, or instant coffee in  
the machine. Sugar will damage the  
machine.  
^ Pull out the coffee bean container.  
^ Push back the lid and fill the  
container with roasted coffee beans.  
^ Slide the lid back into place,  
^ push the coffee bean container back  
into the machine and close the  
machine door.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making drinks  
Switching on  
Pre-warming cups  
When you switch the coffee machine on The cups should always be  
it will start heating up and the pipework pre-warmed to allow the flavour to  
will be rinsed through. This cleans and  
pre-heats the pipework in preparation  
for making coffee.  
develop and be retained. The aroma of  
espresso does not react well to cold.  
The smaller the volume of  
coffee/espresso and the thicker the  
cup, the more important it is to  
pre-warm the cup. Use a plate warming  
drawer if you have one. If not, you can  
warm them as follows:  
^ Touch the On/Off sensor s.  
The following message will then  
appear:  
Heating phase  
^ Place the cup to be warmed under  
the hot water spout.  
If the automatic Rinsing programme  
option has been set to "On" (factory  
default setting), the following will  
appear after the machine has heated  
up:  
^ Touch the Hot water sensor.  
^ Run a little hot water into the cup to  
warm it.  
^ Touch the OK sensor to stop the flow  
of water.  
Rinsing  
^ Leave the cup for about a minute  
until it is warm, then pour the water  
away.  
Water will run out of the central spout.  
To prevent water from  
running into the drip tray,  
always place an empty cup  
or the small cleaning container under  
the central spout before making the first  
drink.  
The main menu will then appear in the  
display:  
Espresso  
q
r
H
I
J
L
n
m
C
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making drinks  
Adjusting the height of the  
central spout  
The height of the central spout can be  
adjusted to suit the height of the cup so  
that the drink will not cool down as  
quickly as it would if the spout were  
further away from the cup. The crema  
will also be a better quality if the coffee  
does not have so far to go!  
^ Place a cup under the central spout.  
The coffee is always dispensed  
simultaneously from both spouts.  
Espresso  
q
r
H
I
J
L
n
m
C
^ Select the type of coffee you want  
with the arrow sensors and touch the  
^ Slowly pull the central spout  
downwards.  
OK sensor once.  
The machine will now grind the coffee  
beans, pre-brew the ground coffee (if  
the "Pre-brewing" option has been set  
to "On") and the coffee will then be  
dispensed from the coffee spouts.  
Preparing espresso and coffee  
from freshly ground beans  
You can programme the size  
of portion dispensed for  
espresso and coffee  
according to taste (see "Programming  
the amount: setting the portion sizes").  
Do not open the machine door  
during the brewing process. This will  
damage the machine.  
Espresso, coffee, double espresso and  
double coffee are all dispensed in the  
same way:  
To ensure that any coffee residues  
from the factory testing process are  
removed from the brewing system,  
please throw away the first two  
cups of coffee.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making drinks  
Double portion  
Making espresso and coffee  
using ready ground coffee  
If you want to dispense a double  
portion of coffee or espresso or to  
dispense two portions at the same time:  
Adding ready ground coffee  
If you want to make espresso or coffee  
using ready ground coffee, you can  
add ground coffee to the specially  
designed coffee chute.  
^ touch the OK sensor a second time  
whilst "2 portions?" is in the display.  
The two portions will be dispensed one  
after the other.  
^ Pull the cover for the coffee chute  
right out of the machine and open up  
the lid (a) to the chute.  
^ To prepare two cups at the same  
time, place one cup under each jet.  
^ Use the scoop supplied and place  
one level scoop of ground coffee into  
the coffee chute (b). Close the lid.  
Cancelling preparation  
^ Touch the OK sensor when "Stop" is  
showing in the display.  
^ Push the cover into the machine and  
close the machine door.  
Preparation will be halted.  
Make the coffee?  
Yes  
No  
^ Use the arrow sensor to highlight  
"Yes".  
The display will change to the main  
menu and you can select the drink you  
want.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making drinks  
If you not added any ground Drinks with milk  
coffee, you must select "No".  
Otherwise the machine will  
assume that there is ground coffee in  
the chute, and only water will be  
dispensed the next time coffee is  
made!  
Stainless steel milk flask  
If using animal milk, only use only  
pasteurised milk to avoid a build-up  
of bacteria.  
The stainless steel milk flask is vacuum  
insulated to keep the milk cold for a  
period of time. With an ambient  
temperature of about 20 °C, milk at  
6 °C can be stored for 11-12 hours and  
remain under 13 °C. (Milk that is  
warmer than 13 °C should not be used  
because it will not make good milk  
froth).  
To make a drink  
^ Place a cup under the central spout.  
^ Touch the OK sensor.  
The machine will prepare espresso or  
coffee, which will then be dispensed  
from the central spout.  
Do not open the machine door  
during the brewing process. This will  
damage the machine.  
Milk cannot be stored for as long as  
11-12 hours if there is a warming  
drawer underneath the coffee machine.  
At the end of the process, the coffee  
machine will revert automatically to  
making coffee with coffee beans.  
Do not fill the stainless steel milk  
flask to the rim. You need to leave a  
gap of at least 2 -3 cm below the  
rim.  
Cancelling preparation  
^ Touch the OK sensor.  
Preparation will be halted.  
It is important to keep the top of the  
flask and the seals clean (whilst  
filling it and carrying it). Any soiling  
can lead to a malfunction of the flask  
in the machine.  
Only one portion can be prepared at  
a time when using ready ground  
coffee. This is because the machine  
will use all the ground coffee which  
has been added to the chute to  
prepare one coffee.  
It is important to pre-heat  
the cup with hot water  
before making your drink.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making drinks  
To make drinks with milk,  
Cappuccino, latte macchiato, hot  
milk, milk froth  
^ Place a suitable cup or glass under  
both jets.  
For best results with latte  
macchiato, the glass should  
be placed beneath the jets  
such that the espresso flows into the  
centre of the milk froth.  
^ place the lid on the stainless steel  
milk flask by twisting it anticlockwise  
until it locks into place.  
Cappuccino  
q
r
H
I
J
L
n
m
C
^ Touch the right arrow sensor until the  
symbol for the drink you want is  
highlighted and then touch the OK  
sensor once.  
^ Touch the OK sensor again to stop  
dispensing.  
You can then specify the proportions  
of coffee, milk froth and hot milk  
required for the drink (see  
^ Open the machine door and hang the  
milk flask in the machine as  
"Programming the amount: setting  
the portion sizes").  
illustrated, ensuring that the milk  
pipework is correctly engaged.  
^ Close the machine door.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making drinks  
User profile drinks  
After use  
The User profile function is used to  
If you have made a drink with milk, the  
select the quantity of water and milk for following message appears in the  
your drink, as well as the fineness of the display after two minutes:  
ground, temperature and pre-brewing  
i
Start the rinsing  
to suit your taste and that of your  
programme  
guests (see "Setting up user profiles").  
If you have set the machine up for a  
specific user profile you must first  
select the user profile required and  
then the type of drink.  
OK  
^ Touch the OK sensor.  
The milk pipework will now be rinsed.  
User profile  
Even if you do not confirm the  
message with "OK", the coffee  
machine will automatically rinse the  
milk pipework after a few minutes.  
q
r
H
I
J
L
n
m
C
^ Touch the right arrow to highlight the  
User profile symbol and then touch  
the OK sensor.  
Before switching the machine off for  
any length of time, the pipework, brew  
system, spouts and milk pipework need  
to be cleaned (see "Cleaning and care:  
Rinse the system" and "Clean milk  
pipework").  
^ Select "Select" with the arrow sensors  
and touch the OK sensor.  
^ Select the user profile you want with  
one of the arrow sensors and touch  
the OK sensor.  
A large user profile symbol n  
will now appear in the  
display to show that a user  
profile has been selected.  
This function operates in the same  
way as a standard profile.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the coffee grinder  
A good espresso or coffee with a thick,  
even crema depends not only on the  
quality, pressure and temperature of  
the water and the quality of the coffee  
beans, but also on the quantity of  
The crema is evenly coloured but  
pale  
The beans have been ground too  
coarsely. Set the grinder on a finer  
setting.  
beans and how finely they are ground.  
The crema should have an even  
nut-brown colour with dark stripes  
running through it.  
The crema is very dark brown on one  
side, graduating almost to white on  
the other  
You can set the amount of coffee beans  
to be ground in the main menu (see  
"Settings: Customising your machine -  
Setting the amount of coffee").  
The beans have been ground too finely.  
Set the grinder on a coarser setting.  
To alter the grinder setting  
Always adjust the amount of beans  
to be ground one stage at a time  
only and then let the machine grind  
this quantity before adjusting the  
amount again. Otherwise the  
machine will be damaged.  
There are various ways to tell whether  
the coffee grinder is set correctly:  
^ Push the slide control one setting to  
the left (for finer grinding) or one  
setting to the right (for coarser  
grinding).  
Espresso or coffee flows into the cup  
too quickly  
You should be able to feel the notches  
when moving the slide control.  
The beans have been ground too  
coarsely and the pressure is not  
sufficient. Set the grinder on a finer  
setting.  
^ If the slide control refuses to move,  
close the machine and dispense a  
cup of espresso coffee.  
Espresso or coffee only trickles into  
the cup  
Then try the slide control again.  
The beans have been ground too finely  
and the coffee will be bitter. Set the  
grinder on a coarser setting.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
It is easy to customise your machine to  
suit your exact requirements.  
Timer: You can set or activate the  
Timer. The following options are  
available in the "Set" menu:  
Settings menu  
Switch on at: The machine can be  
set to switch on at a specific time of  
day.  
To select the various programme  
options:  
Switch off after: The machine can  
be set to switch off after a pre-set  
time. A time of between 15 minutes  
to 9 hours can be set.  
Settings F  
q
r
H
I
J
L
n
m
C
^ Touch the right arrow sensor until  
Switch off at: The machine can be  
set to switch off at a specific time of  
day.  
"Settings F" appears in the display,  
and then touch the OK sensor.  
^ Touch one of the arrow sensors until  
the option you want is highlighted.  
Coffee jug: 3 to 8 cups  
Programming the amount: Espresso,  
coffee, cappuccino, latte macchiato,  
hot milk, milk froth and hot water (see  
"Programming the amount: setting the  
portion sizes").  
^ Then touch the OK sensor to select  
the highlighted option.  
The option that is currently active on the  
machine will have a tick next to it.  
Amount of coffee: You can set  
different amounts of coffee for  
espresso, coffee, cappuccino and latte  
macchiato.  
Possible setting options  
Language F: 22 different languages  
are available to choose from.  
Pre-brewing: Long, Normal, Without  
Time of day: You can set either a 24  
hour or 12 hour clock, and choose to  
have the Time of day display on or off.  
Temperature: The temperature for  
espresso, coffee, cappuccino, latte  
macchiato and hot water can be set  
from minimum to maximum.  
Automatic rinsing: On, Off  
Eco mode: On, Off  
Lighting: Brightness  
Info: No. of drinks, Portions until  
descaling  
Safety: System lock (On, Off)  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
Water hardness: Soft 1, Medium 2,  
Selecting the language  
Hard 3, Very hard 4  
If you want to change the language  
used in the display, use the Settings  
menu and follow the flag symbol.  
Display: Contrast, Brightness  
Volume: Buzzer tones, Keypad tone  
^ Select "Settings F" from the Main  
Plate warmer (CVA 5060 only): Auto-  
menu, and then touch the OK sensor.  
matic, On, Off  
Settings  
Showroom prog.: Demo programme,  
Language F  
Time of day  
Off  
Factory default: All settings can be  
reset to the factory default, and user  
profiles deleted.  
^ Touch the OK sensor.  
^ Touch one of the arrow sensors until  
the language you want is highlighted.  
^ Touch the OK sensor.  
To return to the previous option in  
the menu, select "Back A".  
Further details about the different  
options can be found in the pages  
that follow.  
The setting is saved automatically and  
the display will go back to the previous  
screen.  
All display texts will now appear in the  
language you have just selected.  
If you select the wrong language by  
mistake, find the "Language" option  
via the flag symbol F again.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
Setting the time of day  
Clock format  
^ Select "Settings F" from the Main  
^ Use the arrow sensors to select  
"Clock format".  
menu, and then touch the OK sensor.  
^ Use the right arrow to select a 24 h or  
12 h clock.  
Settings  
Time of day  
Timer  
^ Touch the OK sensor when the option  
you want is highlighted.  
^ Touch the right arrow sensor until  
"Time of day" is highlighted and touch  
the OK sensor.  
The clock format you have chosen will  
be saved.  
There are three options:  
Setting the time of day  
Display  
^ Use the arrow sensors to select "Set".  
The Time of day display can be  
switched on or off.  
^ First set the hour with one of the  
arrow sensors. Touch the OK sensor.  
^ Use the arrow sensors to select  
"Display".  
^ Then use the arrow sensors to set the  
minutes. Touch the OK sensor.  
You can now choose one of three  
options:  
The time of day is now saved.  
You can also set the time of  
day and alter the display  
"On": The display will always show  
the time of day (even when the  
machine is switched off).  
options when the coffee  
machine is switched off.  
"On for 60 seconds": The display  
will show the time for 60 seconds,  
and then go dark after the machine  
is switched off.  
To do this:  
^ Touch the OK sensor whilst the  
machine is off.  
^ Select "Time of day" and touch the  
OK sensor.  
"Do not display": The display will  
only show the time of day when the  
machine is switched on, and will go  
dark as soon as it is switched off.  
Now select "Display" or "Set" and alter  
as required.  
^ Once you have selected the display  
format you require, touch OK.  
^ Touch the OK sensor to save the  
setting.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
Setting the timer  
If Automatic rinsing is set to "On", the  
^ Select "Settings F" from the Main  
machine will automatically carry out  
a brief rinse when it switches itself  
on.  
menu, and then touch the OK sensor.  
Settings  
Timer  
If the System lock is activated, the  
machine will not switch itself on at  
the pre-set time.  
Coffee jug  
^ Touch the right arrow sensor until  
"Timer" is highlighted and touch the  
OK sensor.  
If the machine has switched itself on  
automatically 3 times and no drinks  
or hot water have been dispensed,  
the machine will not switch itself on  
again automatically. The  
^ Select "Set" with the arrow sensors  
and touch the OK sensor.  
There are three options:  
programmed times will, however,  
remain in memory and will be  
Switch on at:  
You can choose a time for the coffee  
machine to switch on automatically,  
e.g. in the morning for breakfast.  
reactivated after manually switching  
the machine on again. This prevents  
the machine switching itself on  
unnecessarily, for example whilst  
you are away on holiday, and you  
have not cancelled the automatic  
switching on procedure.  
^ Select "Switch on at" with the arrow  
sensors and touch the OK sensor.  
^ First set the hour with one of the  
arrow sensors. Touch the OK sensor.  
Switch off after:  
^ Then use the arrow sensors to set the  
minutes. Touch the OK sensor.  
To save energy, the machine can be  
set to switch off automatically by  
selecting the "Switch off after" option. A  
time of between 15 minutes and  
9 hours can be set. This time is  
measured from the last time a drink was  
dispensed.  
If you activate the Timer, the coffee  
machine will switch on every day at the  
time you have set (see "Activate").  
^ Select "Switch off after" with the arrow  
sensors and touch the OK sensor.  
For example, 1:00 means that the  
machine will switch off after 1 hour.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
^ First set the hour with one of the  
arrow sensors. Touch the OK sensor.  
Activate  
^ Select "Activate" with the arrow  
sensors and touch the OK sensor.  
^ Then use the arrow sensors to set the  
minutes. Touch the OK sensor.  
The "Switch on at" and "Switch off at"  
options will show in the display.  
The machine will now switch off after  
the time you have set.  
Activate  
If Automatic rinsing is set to "On"  
and the machine has been used for  
making drinks, it will automatically  
carry out a brief rinse before it  
switches itself off.  
8
Switch on at  
8Switch off at  
^ Select the option required with one of  
the arrow sensors.  
Touching the OK sensor activates the  
option (ticked box) or deactivates it (no  
tick).  
Switch off at:  
If you always use your machine at a  
particular time of the day you can set it  
to switch off automatically at a specific  
time.  
^ Use one of the arrow sensors to  
select "Accept" and then touch the  
OK sensor.  
^ Now use one of the arrow sensors to  
select "Back A" and touch the OK  
sensor.  
^ Select "Switch off at" with the arrow  
sensors and touch the OK sensor.  
^ First set the hour with one of the  
arrow sensors. Touch the OK sensor.  
^ Then use the arrow sensors to set the  
minutes. Touch the OK sensor.  
If you activate the Timer, the coffee  
machine will switch off every day at the  
time you have set (see "Activate").  
If Automatic rinsing is set to "On"  
and the machine has been used for  
making drinks, it will automatically  
carry out a brief rinse before it  
switches itself off.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
Coffee jug (making several  
Setting the amount of coffee  
cups one after the other)  
Both the flavour and the crema on the  
coffee depend on the quantity of  
ground coffee used.  
This function can be used to make up  
to 8 cups of coffee automatically one  
after the other (max. 1 l).  
6 to 14 grams of coffee beans are used  
per cup, depending on the type of  
coffee. The greater the quantity, the  
stronger the espresso, coffee,  
cappuccino, latte macchiato or  
cappuccino.  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
Settings  
Coffee jug  
Prog. the amount  
The quality of the crema is also affected  
by the quantity:  
^ Touch the right arrow sensor until  
"Coffee jug" is highlighted and touch  
the OK sensor.  
– If the crema is evenly coloured but  
pale, it could mean that too little  
coffee is being used.  
^ Select the number of cups you wish  
to make (3 to 8), and confirm with  
OK.  
– If the crema is very dark brown on  
one side, graduating almost to white  
on the other, it could mean that too  
much coffee is being used.  
^ Place a coffee jug of a suitable size  
under the central spout and follow  
the directions in the display.  
You can set different  
amounts of coffee beans to  
be ground for espresso,  
coffee, cappuccino and latte  
macchiato.  
The coffee for each cup is individually  
ground, brewed and poured. Each  
stage of the process is shown in the  
display. You can cancel the process at  
any time by touching the OK sensor  
("Stop").  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
^ When "Programme finished"  
appears in the display, confirm with  
OK.  
Settings  
Amount of coffee  
Pre-brewing  
^ Touch the right arrow sensor until  
"Amount of coffee" is highlighted and  
touch the OK sensor.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
^ Use the arrow sensor to select the  
drink that you wish to set the amount  
of coffee for and then touch the OK  
sensor.  
^ Use the arrow sensors to highlight  
the Pre-brewing option.  
^ Touch the OK sensor to save the  
setting.  
^ Use the arrow sensor to set the  
amount to "more" or "less".  
Setting the temperature  
^ Touch the OK sensor to save the  
setting.  
Different temperature ranges can be  
selected to take account of making  
coffee at different altitudes. If the  
machine is located above 2000 meters  
above sea level the temperatures need  
to be set lower due to the change in  
pressure.  
Setting Pre-brewing  
When the Pre-brewing function is  
switched on, the freshly ground coffee  
is first moistened with a little hot water.  
Then the remaining water is forced  
through the moistened coffee at high  
pressure. This will make the aroma of  
the coffee considerably more intensive.  
There is a choice of five temperature  
settings for each type of coffee, and  
three for hot water.  
Not all types of coffee can  
withstand a high  
Without pre-brewing, hot water is  
forced straight away at high pressure  
through the ground coffee.  
temperature. Certain types  
are too delicate and the crema on top  
would not be so good.  
You can select a normal or extra long  
Pre-brewing, or deselect Pre-brewing  
altogether. The machine is delivered  
with Pre-brewing set at Off (=  
Without) .  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
Settings  
Temperature  
Automatic rinsing  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
^ Touch the right arrow sensor until  
"Temperature" is highlighted, and  
then touch the OK sensor.  
Settings  
Pre-brewing  
Temperature  
^ Use the arrow sensors to highlight  
the drink for which you wish to set the  
temperature, and then touch the OK  
sensor.  
^ Touch the right arrow sensor until  
"Pre-brewing" is highlighted and  
touch the OK sensor.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
^ Use the arrow sensors to highlight  
the temperature option.  
Setting Eco mode  
Eco mode is an energy saving mode in  
which the steam system for preparing  
hot milk or milk froth has to heat up.  
^ Touch the OK sensor to save the  
setting.  
With Eco mode switched off, milk froth  
or hot milk, and coffee or espresso can  
be made in rapid succession. The  
steam system remains heated up and  
this uses considerably more energy.  
Setting Automatic rinsing  
The pipework is rinsed through  
automatically when the coffee machine  
is switched off if the automatic rinsing  
function is switched on and the coffee  
machine has been used for preparing  
drinks.  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
Settings  
Eco mode  
Lighting  
The machine is delivered with  
automatic rinsing switched on.  
^ Select "Settings F" from the Main  
^ Touch the right arrow sensor until  
"Eco mode" is highlighted and touch  
the OK sensor.  
menu, and then touch the OK sensor.  
Settings  
Automatic rinsing  
Eco mode  
^ Touch one of the arrow sensors to  
select "On" or "Off", and then touch  
the OK sensor.  
^ Touch the right arrow sensor until  
"Automatic rinsing" is highlighted and  
touch the OK sensor.  
The altered energy consumption mode  
is displayed.  
^ Touch one of the arrow sensors to  
select "On" or "Off", and then touch  
the OK sensor.  
It is a good idea to set this  
option to "On" so that the  
rinse process cannot be  
forgotten.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
Lighting: Setting the  
brightness  
^ Touch the OK sensor whilst the  
machine is off.  
^ Select "Lighting" and touch the OK  
sensor.  
You can set how bright the lighting  
should be on the machine:  
^ Select "Switch off after" and touch the  
OK sensor.  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
^ Select the switch-off time you want  
with the arrow sensors and touch the  
OK sensor.  
Settings  
Lighting  
Info  
^ Select "Brightness", and then touch  
the OK sensor.  
^ Touch the right arrow sensor until  
"Lighting" is highlighted, and then  
touch the OK sensor.  
^ Touch one of the arrow sensors to  
select a lighter or darker setting, and  
then touch the OK sensor to save the  
setting (factory default setting: Off).  
^ Select "Brightness", and then touch  
the OK sensor.  
^ Touch one of the arrow sensors to  
select a lighter or darker setting, and  
then touch the OK sensor.  
^ Touch "Back A" twice to leave the  
menu.  
The lighting will switch off automatically  
after the duration set.  
To switch the lighting off:  
^ Touch the left arrow sensor until  
none of the small white bars is  
showing.  
If you do not want the coffee machine  
to be lit up after it is switched off  
(factory default setting):  
Lighting: Setting the switch-off  
time  
^ Touch the OK sensor whilst the  
machine is off.  
^ Select "Lighting" and touch the OK  
sensor.  
The machine lights up when switched  
on. It switches off automatically after 15  
minutes of inactivity to save energy.  
^ Select "Brightness", and then touch  
the OK sensor.  
The lighting can be set to remain on  
after the machine is switched off, and  
then to go out automatically after a  
specified time if the machine is not  
used.  
^ Touch the left arrow sensor until  
none of the small white bars is  
showing.  
^ Touch "Back A" twice to leave the  
This duration can be set to between 15  
minutes and 6 hours:  
menu.  
^ Switch the machine off.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
Info (showing the number of  
Safety (activating the System  
lock)  
drinks)  
The "Info" option enables you to check  
how many drinks the machine has  
already dispensed or how many you  
can still dispense before it has to be  
descaled.  
The machine can be locked to ensure  
that it is not operated by unsupervised  
children or persons who are  
unacquainted with the operating  
instructions.  
^ Select "Settings F" from the Main  
When the machine is locked, the  
"Switch on at" setting of the timer will  
not work.  
menu, and then touch the OK sensor.  
Settings  
Info  
To activate or deactivate the system  
lock  
Safety  
^ Touch the right arrow sensor until  
"Info" is highlighted and touch the OK  
sensor.  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
^ Select "No of drinks" or "Portions until  
descale" with the arrow sensors and  
touch the OK sensor.  
Settings  
Safety  
Water hardness  
With "No of drinks" you can check the  
"Total number of coffees" or the number  
of portions dispensed to date of a  
particular type of coffee, milk froth, hot  
milk or hot water.  
^ Select "Safety" with the arrow sensors  
and touch the OK sensor.  
^ Use an arrow sensor to highlight  
"System lock" and then touch the OK  
sensor.  
^ Touch the OK sensor to return to the  
previous display.  
^ Select "On" with the arrow sensors  
and touch the OK sensor.  
The machine will now lock as soon as it  
is switched off and cannot be switched  
on again. If a sensor is touched, a  
message and a locked padlock X will  
appear in the display.  
To deactivate the System lock,  
proceed as above, but select "Off".  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
To override the System lock  
^ Touch the OK sensor for about 3  
seconds.  
The machine is now temporarily  
unlocked and can be used to make  
drinks again. It locks itself as soon as  
the machine is switched off.  
Setting the water hardness  
^ Dip the strip in your drinking water for  
For trouble-free operation of the coffee  
machine, and to ensure that the  
descaling reminder appears in the  
display at the appropriate time, it is  
important to set the water hardness  
level. The water hardness level  
indicates how much calcium is  
dissolved in the water. The higher the  
calcium content, the harder the water,  
and the harder the water, the more  
often the machine will need to be  
descaled.  
approximately a second, then shake  
off any excess water. The result will  
be evident after about a minute.  
The machine has four programmable  
levels:  
Level 1(soft):  
Local water hardness range 1  
0-8.4°dH (0-1.5 mmol/l)  
Water volume: approx. 80 l  
Steam duration: approx. 90 min.  
Level 2 (medium):  
The machine measures the amount of  
water which has been taken in  
Local water hardness range 1  
8.4-14°dH (1.5-2.5 mmol/l)  
Water volume: approx. 60 l  
Steam duration: approx. 60 min.  
(including the amount required for  
producing steam). The amount of water  
which the machine can use before it  
needs to be descaled will depend on  
the water hardness level set. Less  
water will be used in hard water areas  
than in soft water areas.  
Level 3 (hard):  
Local water hardness range 2  
14-21°dH (2.5-3.7 mmol/l)  
Water volume: approx. 40 l  
Steam duration: approx. 30 min.  
Your local water authority will be able to  
tell you the hardness of water in your  
area. Alternatively, you can measure  
the hardness yourself using the  
enclosed test strip:  
Level 4 (very hard):  
Local water hardness ranges 3-4  
21°dH ( 3.7 mmol/l) or more  
Water volume: approx. 20 l  
Steam duration: approx. 20 min.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
Setting the display  
If the water is harder than 40°dH/7.0  
You can adjust both the contrast and  
the brightness of the display:  
mmol/l, limescale will build up more  
rapidy than with soft water.  
Descaling will need to be carried out  
more regularly than stated to  
prevent limescale damage to the  
machine.  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
Settings  
Display  
Volume  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
^ Touch the right arrow sensor until  
"Display" is highlighted and touch the  
OK sensor.  
Settings  
Water hardness  
Display  
^ Touch one of the arrow sensors to  
select "Contrast" or "Brightness" and  
touch the OK sensor.  
^ Use the arrow sensors to highlight  
"Water hardness" and then touch the  
OK sensor.  
^ Touch one of the arrow sensors to set  
the contrast lower or higher or the  
brightness lighter or darker.  
^ Touch one of the arrow sensors to set  
the water hardness, and then touch  
the OK sensor.  
^ Touch the OK sensor to save the  
setting.  
The water hardness level selected is  
saved to memory.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
Setting the volume (keypad  
tone, buzzer)  
Activating the plate warmer  
(CVA 5060 only)  
You can choose for a tone to sound  
each time a sensor is touched. The  
volume of the tone can also be  
adjusted:  
You can connect a Miele EGW 4000-14,  
-29 or an EGW 5000-14 to the coffee  
machine using a special connection  
cable available as an optional  
accessory from your Miele Dealer or the  
Miele Spare Parts Department.  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
Once the plate warmer is connected,  
you will need to "install" the plate  
warmer in the "Settings" menu.  
Settings  
Volume  
Plate warmer  
^ Select "Settings F" from the Main  
^ Touch the right arrow sensor until  
"Volume" is highlighted, and then  
touch the OK sensor.  
menu, and then touch the OK sensor.  
Settings  
Plate warmer  
Showroom prog.  
^ Touch one of the arrow sensors to  
select "Buzzer tones" or "Keypad  
tone" and touch the OK sensor.  
^ Touch the right arrow sensor until  
"Plate warmer" is highlighted and  
touch the OK sensor.  
^ Touch one of the arrow sensors to set  
the volume quieter or louder.  
There are three options:  
If you continue towards the left until  
none of the small white bars is showing,  
the tone will be switched off.  
Automatic  
The plate warmer will switch on and off  
together with the coffee machine. The  
plate warmer must be switched on with  
the On/Off sensor.  
^ Touch the OK sensor to save the  
setting.  
If you have programmed the coffee  
machine to switch on at a specific time,  
the plate warmer will always switch on  
approx. 30 minutes before the coffee  
machine is due to switch on so that  
your cups are warmed up ready for  
your coffee.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
On  
Showroom programme  
You can switch the plate warmer on  
and off manually whenever you want,  
independently of the coffee machine.  
This function enables the machine to be  
illuminated in a showroom situtation  
without the heaters working.  
Off  
Resetting the factory default  
settings  
The plate warmer will not switch on  
because the coffee machine is not  
supplying it with any electricity. The  
coffee machine is delivered with "Off"  
as the default setting.  
The "factory default" setting is used to  
reset the various settings back to the  
default status.  
From here you can select whether to  
reset all settings back to the default or  
to delete any user profiles.  
To switch the plate warmer on  
independently of the coffee machine  
^ Select "Settings F" from the Main  
You can switch the plate warmer on via  
the coffee machine, even without the  
coffee machine being switched on.  
menu, and then touch the OK sensor.  
Settings  
^ Touch the OK sensor whilst the  
machine is off.  
Factory default  
Back #  
^ Use an arrow sensor to highlight  
"Factory default", and then touch the  
OK sensor.  
^ Select "Plate warmer" and touch the  
OK sensor.  
^ Select "Manual - on" and touch the  
OK sensor.  
Various options will then be available:  
The plate warmer is now switched on.  
To switch the plate warmer off again,  
proceed as above again, but select  
"Manual - off" instead of "Manual -  
on".  
If you have forgotten to switch the  
plate warmer off, it will switch itself  
off automatically after a maximum of  
9 hours.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings: Customising your machine  
All settings  
– Display: Display - Contrast (medium),  
Brightness (maximum)  
This option sets "All settings" back to  
the factory default.  
– Volume: Volume of buzzer tones and  
keypad tone (maximum setting for  
both)  
^ Select "Reset" under "All settings",  
and touch the OK sensor.  
– User profile: Revert (when switched  
on).  
All settings are then reset to the default.  
If you select "Reset" by  
mistake, switch the coffee  
User profiles  
machine off: Resetting to the  
You can delete all user profiles except  
for the standard one under "User  
Profiles".  
factory defaults will not be carried out.  
Factory default settings (the coffee  
machine is delivered with the  
following settings)  
^ Select "Reset" under "User profiles",  
and touch the OK sensor.  
User profiles are then deleted.  
– Amount of coffee (medium)  
If you select "Reset" by  
mistake, switch the coffee  
– Temperatures for coffee and hot  
water (medium settings for both)  
machine off: Resetting to the  
– Pre-brewing (without)  
factory defaults will not be carried out.  
– Automatic rinsing and Eco mode  
(both set to "On")  
Miele|home  
– Plate warmer and Showroom prog.  
(both set to "Off")  
With Miele@home, the coffee machine  
becomes communication-enabled and  
can be operated via a pc or mobile  
phone. For further information please  
contact Miele.  
– Time of day display (On for 60  
seconds),  
Clock format (24 h),  
Timer - Switch on at (12:00),  
Timer - Switch off after (1:00),  
Timer - Switch off at (12:00), (Switch  
on at and Switch off at are both  
deactivated)  
– Coffee jug (3 cups)  
– Lighting: Brightness (medium)  
– Safety: System lock (Off)  
– Water hardness (Very hard 4)  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming the amount: setting the portion sizes  
The flavour of the coffee produced  
depends on the type of coffee, how  
finely the beans are ground and the  
quantity of water used. Not all espresso  
and coffee cups are the same size. To  
ensure the machine uses the right  
amount of water to suit your taste and  
your cups, you can programme the  
amount to use.  
Programming the amount of  
espresso, coffee, hot milk and  
milk froth via the OK sensor  
^ Place the appropriate cup for the  
amount you want to programme  
under the spouts.  
^ Select the type of drink you require.  
^ Touch the OK sensor until "Prog. the  
amount" appears in the display.  
With milky drinks the proportions of  
espresso, milk and milk froth are  
important for the taste. These  
proportions can be set for cappuccino  
and latte macchiato.  
^ When sufficient liquid has flowed into  
the cup and "Save" shows in the  
display, touch the OK sensor again.  
^ The volumes of water or milk  
programmed in will now be  
dispensed every time that particular  
drink is selected.  
You can programme the amount in two  
ways, either by touching the OK sensor  
continually, or via the "Settings" option.  
If a User profile has been activated,  
the proportions for this particular  
User profile will be set.  
Water flow stops automatically when  
the maximum amount possible is  
reached. The maximum amount  
possible for that type of drink will be  
saved.  
If you wish to set the proportions for  
all of the User profiles, select the  
"Standard" user profile.  
If there is insufficient water or milk in  
the water container or milk flask, the  
process will be stopped and the  
amount will not be saved.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming the amount: setting the portion sizes  
Programming the proportions  
for cappuccino or latte  
^ Once sufficient has flowed into the  
cup or glass and "Save" shows in the  
display, touch the OK sensor to save  
the amount.  
macchiato via the OK sensor  
^ Place the appropriate cup or glass  
for the amount you want to  
Each subsequent drink of this type will  
then have the same proportions of  
coffee, milk etc.  
programme under the spouts.  
^ Select Cappuccino or Latte  
Macchiato.  
^ Touch the OK sensor until the display  
shows the options for Cappuccino  
(Milk froth, Espresso) or Latte  
Macchiato (Hot milk, Milk froth,  
Espresso).  
Latte Macchiato  
8 Hot milk  
8 Milk froth  
^ Use the arrow sensor to select the  
component you wish to set the  
amount for.  
^ Touch the OK sensor to activate a  
tick next to the component you have  
selected so that you can then  
programme its amount.  
^ Repeat this for all components  
required for that drink.  
^ Select "Start" with the arrow sensors  
and touch the OK sensor.  
The machine will now start the process  
for making a cappuccino or latte  
macchiato.  
As soon as the component required  
starts to flow into the cup or glass  
"Programme the amount" will appear in  
the display.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming the amount: setting the portion sizes  
Programming the amount for  
hot water via the Hot water  
sensor  
Programming the amount via  
"Settings"  
^ Select "Settings F" from the Main  
menu, and then touch the OK sensor.  
^ Place the appropriate cup for the  
amount you want to programme  
under the hot water spout.  
Settings  
Prog. the amount  
Amount of coffee  
^ Touch the Hot water sensor until  
"Prog. the amount" appears in the  
display.  
^ Use the arrow sensors to highlight  
"Prog. the amount", and then touch  
the OK sensor.  
^ Once sufficient water has flowed into  
the cup and "Save" shows in the  
display touch the Hot water sensor  
again.  
^ Use the arrow sensors to select the  
drink you wish to set the amount for.  
^ Select "Start" and touch the OK  
sensor.  
Each subsequent portion of hot water  
will then have the same amount.  
The procedure is now the same as for  
programming the amount using the OK  
sensor or the Hot water sensor.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up User profiles  
To cater for different tastes and  
preferences, you can enter up to 9  
individual User profiles. For each User  
profile, you can select the following  
individual settings:  
The following options only appear if you  
have already entered a new User  
profile in addition to the Standard User  
profile:  
Change User profile, if you want to  
– The amount of water for  
alter a User profile.  
coffee-based drinks and hot water  
Delete User profile, if you want to  
– The amount of milk for drinks with  
milk  
delete a User profile.  
Revert: You can programme the  
machine so that it always reverts to  
the Standard User profile or so that it  
continues to operate using a User  
profile you have set.  
– The amount of coffee  
– The water temperature  
– Pre-brewing  
(See "Programming the amount: setting  
the portion sizes" and "Settings:  
customising your machine").  
Selecting a User profile  
^ Select the User profile you want with  
the arrow sensors and touch the OK  
sensor.  
User profile  
Espresso  
q
r
H
I
J
L
n
m
C
+
George  
^ Touch the right arrow sensor until  
"User profile" is highlighted, and then  
q
r
H
I
J
L
n
m
C
touch the OK sensor.  
You can now:  
To show that a user has  
been selected, the top line of  
the display will now show a  
large symbol for a "user".  
Select User profile from the User  
profiles which are already allocated.  
Create User profile, if you want to  
enter a new User profile.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up User profiles  
Creating a User profile  
Saving an entry  
^ Use the arrow sensors to highlight  
"Create", and then touch the OK  
sensor.  
^ When you have finished making your  
entry, use the arrow sensors to  
highlight the word "OK" and then  
touch the OK sensor.  
You can allocate up to 9 User  
profiles. If you try to allocate more  
than 9 User profiles, "Memory full"  
will appear in the display and you  
will need to delete one name to  
create space.  
The User profile welcome screen will  
appear briefly in the display, and then  
the Main menu.  
Not saving an entry  
^ If you don't wish to save your entry,  
use the arrow sensors to highlight the  
word "Back A" and then touch the  
OK sensor.  
Letters and numbers will now appear in  
the display. Use the arrow sensors to  
select the letters and numbers you  
require.  
Changing a User profile  
A new word always starts with a capital  
letter. The rest of the word will  
automatically be in lower case.  
Hyphens and spaces can be used  
between lower case letters.  
Once you have selected the "Change"  
option and confirmed your selection  
with OK,  
^ select the User profile, and touch the  
OK sensor.  
^ Use the arrow sensors to select the  
characters you require.  
Now proceed as described in "Creating  
a User profile".  
^ Confirm each one with the OK  
sensor.  
– To delete a letter, select the bin  
symbol.  
The characters you have chosen will  
appear in the top line of the display.  
– To enter new characters, select the  
relevant character and confirm with  
OK.  
If you make a mistake, use  
the arrow sensors to select  
the bin symbol and touch the  
OK sensor. The last character will be  
deleted.  
– Save the new name by selecting  
"OK" in the display and touching the  
OK sensor.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up User profiles  
Deleting a User profile  
After each use  
If you want to delete the User profile  
completely,  
The machine will automatically revert to  
the Standard User profile each time a  
drink is dispensed.  
^ Select "Delete User profile" using the  
OK sensor.  
^ Select "After each use" with the arrow  
sensors and touch the OK sensor.  
^ Use the arrow sensors to select the  
User profile you want to delete.  
When switched on  
^ Touch the OK sensor.  
Each time the machine is switched on it  
will automatically select the Standard  
User profile regardless of which User  
profile was set before the machine was  
last switched off.  
A tick will appear after the user profile  
and after a short while it will be deleted.  
Revert  
^ Select "When switched on" with the  
arrow sensors and touch the OK  
sensor.  
You can programme the machine so  
that it reverts to the Standard User  
profile after you have made each drink,  
or so that it continues to operate using  
a User profile you have set.  
To set the profile to be used:  
^ Select "Revert" with one of the arrow  
sensors.  
You can now select one of the  
following:  
Manually  
The coffee machine will store the User  
profile you have selected until you  
select another one.  
^ Select "Manually" with the arrow  
sensors and touch the OK sensor.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Quick guide  
Clean the coffee machine every day to prevent a build-up of bacteria.  
Recommended frequency  
What do I have to do?  
Each time milk is used to make a  
drink, if more than one hour has  
passed since the last drink was  
made  
Rinse milk pipework  
Rinse the system (pipework)  
Clean the milk pipework (with cleaning agent)  
Clean the stainless steel milk flask and lid  
Clean the central spout  
Every day  
(usually at the end of the day,  
before the machine is switched off)  
Clean the water container  
Clean the waste container  
Clean the drip tray and the drip tray cover  
Clean the central spout connector  
Clean the inside of the machine  
Clean the small drip tray inside the machine door  
Clean the brew unit  
Once a week  
(or more often if badly soiled)  
Clean the front of the machine (especially straight after  
descaling)  
Once a month  
Lubricate the cap on the central spout connector  
Degrease the brew unit (with cleaning tablets)  
Descale the machine  
Approx. every 200 portions  
Depending on the hardness of the  
water  
As required  
Clean milk pipework of any blockages  
Clean the coffee bean container  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Always allow the machine to cool  
down before cleaning. Please be  
aware that the water in the drip tray  
will be hot.  
All surfaces are susceptible to  
scratching. Scratches on glass  
surfaces could even cause a  
breakage.  
Danger of scalding.  
Contact with unsuitable cleaning  
agents can discolour the external  
surfaces.  
Do not clean the machine with a  
steam cleaner as this will damage it.  
Wipe up any spillages or splashes  
Do not use cleaners containing  
chlorides, acids, soda or scouring  
agents. These would damage the  
surface.  
of descaling agent immediately.  
Avoid the following on all types of  
front:  
– cleaning agents containing soda,  
ammonia, acids or chlorides,  
It is important to clean the machine  
regularly, as the used coffee grounds  
will soon go mouldy. Sour milk deposits  
can block the milk pipework.  
– solvent-based cleaning agents,  
– descaling agents,  
All removable parts can be cleaned in  
– stainless steel cleaning agents,  
– dishwasher cleaner,  
the dishwasher except for:  
– the brew unit  
– abrasive cleaning agents, e.g.  
powder cleaners and cream  
cleaners,  
– the coffee bean container  
– the stainless steel milk flask and lid  
– the cover to the central spout.  
– hard, abrasive sponges, e.g. pot  
scourers, brushes or sponges which  
have been previously used with  
abrasive cleaning agents,  
Cleaning parts frequently in a  
dishwasher can cause them to become  
discoloured. This is caused by regular  
contact with food residues (e.g.  
tomatoes) in the dishwasher. The  
surface can also become damaged.  
– melamine eraser blocks,  
– sharp metal scrapers.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Rinse the system  
Milk pipework  
Before switching the machine off for  
any length of time, the pipework, brew  
system and central spout need to be  
cleaned.  
All parts of the milk system need to  
be cleaned thoroughly and  
regularly.  
Milk contains bacteria which  
proliferate rapidly with inadequate  
cleaning. A dirty machine can be  
harmful to health.  
If you have switched the automatic  
rinsing function off, you will need to  
rinse the system through manually.  
Place the smaller of the two containers  
under the central spout.  
Rinse milk pipework  
To prevent milk going off in the  
machine and the pipework getting  
clogged up, it should be rinsed  
through after use. Rinsing is not a  
substitute for cleaning the pipework  
at the end of the day.  
Maintenance  
q
r
H
I
J
L
n
m
C
^ Touch the right arrow sensor to  
highlight the maintenance symbol  
and touch the OK sensor.  
^ Select "Rinse the system" and touch  
the OK sensor.  
Maintenance  
^ Select "Start" and touch the OK  
sensor.  
q
r
H
I
J
L
n
m
C
^ Touch the right arrow sensor to  
highlight the maintenance symbol  
and touch the OK sensor.  
The main menu will reappear in the  
display after the pipework has been  
rinsed. The machine can then be  
switched off.  
^ Select "Rinse milk pipework" and  
touch the OK sensor.  
^ Select "Start" and touch the OK  
sensor.  
Follow the instructions in the display.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
^ Select "Start" and touch the OK  
sensor.  
The display will let you know the current  
status of the machine or what action  
needs to be taken.  
^ Follow the instructions step by step.  
To clean the milk pipework: Fill the  
larger of the two plastic containers  
to the "max." mark with lukewarm  
water, to allow the powder to  
dissolve.  
To rinse the milk pipework: Fill the  
larger of the two plastic containers  
to the "max" mark with cold water.  
Then fit the lid from the stainless  
steel milk flask making sure it  
engages properly.  
Then fit the lid from the stainless  
steel milk flask making sure it  
engages properly.  
Clean milk pipework  
The milk pipework will now be cleaned.  
The pipework is clean once Prog.  
finished appears in the display. You  
can then switch the machine off.  
To prevent milk going off in the  
machine and the pipework getting  
clogged up it should be cleaned at the  
end of each day using the Miele  
cleaning agent for milk pipework  
supplied.  
This cleaning agent has been specially  
developed for use in Miele coffee  
machines and is available from Miele or  
Use only this cleaning agent, as  
others could damage the machine.  
Maintenance  
q
r
H
I
J
L
n
m
C
^ Touch the right arrow sensor to  
highlight the maintenance symbol  
and touch the OK sensor.  
^ Select "Clean milk pipework" and  
touch the OK sensor.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Clean milk pipework of any  
blockages  
If you are getting steam instead of milk  
from the central spout the milk  
pipework in the machine is probably  
blocked up.  
If the milk pipework in the lid is  
clogged,  
^ use the cleaning brush to clean it  
under running water.  
^ Take the cover off together with the  
milk pipework. Clean the whole  
component in the dishwasher without  
dismantling it.  
Insert the brush into the pipework  
and move it back and forth as far as  
it will go until all the milk deposits are  
removed.  
If there are still milk residues in the  
pipework after this, use the cleaning  
brush supplied to remove them. To do  
so, dismantle the cover and the milk  
pipework as follows:  
If the milk pipework in the machine is  
clogged,  
^ take the lid off the central spout. Pull  
the jets out of the central spout (See  
"Central spout").  
Do not take the milk pipework out of  
its holder. This could cause the  
pipes to leak.  
^ Open the door.  
^ Remove the stainless steel milk flask  
and clean it, making sure you  
thoroughly clean the area around the  
lid and neck (see "Stainless steel milk  
flask with lid").  
^ Press down on the small recess in  
the spout's holder (a) and pull the  
holder forwards and out (b). Loosen  
the milk pipework from its guides.  
^ Release the cover to the milk  
pipework by pressing the tabs in on  
the left and right hand sides.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
^ Take hold of the second holder by  
pin (c) and pull it upwards and off.  
The hoses can now be cleaned with a  
brush under running water.  
^ Now push the milk pipes into the  
guides (a) and push the spout  
holder (b) back on. It should click  
into place.  
^ Fit the cover with the milk pipes back  
into position behind the machine  
door.  
^ Push the brush into both milk pipes  
from below. Move the brush in and  
out of the pipes as far as it will go  
until there are no milk residues left in  
them.  
^ Re-fit the central spout (see "Central  
spout").  
Re-assemble the milk pipework as  
follows:  
^ Fit the holder with the plug into the  
cover as shown. Make sure that the  
holder fits correctly on the cover.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Stainless steel milk flask with  
lid  
The stainless steel milk flask with lid  
must be washed by hand using hot  
water.  
It is important to keep the top of the  
flask and the seals clean (whilst filling it  
and carrying it). Any soiling can lead to  
a malfunction of the flask in the  
machine.  
^ Clean the stainless steel flask with  
hot water after use to remove any  
residual milk.  
^ Clean the lid under running tap water  
and then clean it thoroughly with a  
clean damp cloth to remove any milk  
residues.  
If the milk pipework in the lid is  
clogged,  
^ use the cleaning brush to clean it  
under running water.  
Insert the brush into the pipework  
and move it back and forth as far as  
it will go until all the milk deposits are  
removed.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Central spout  
^ Remove the two rubber stoppers  
(a) and manually clean these and  
the jets thoroughly. If required,  
remove the air intake tube (b). Any  
blockages can be dislodged by  
kneading or "blowing through" the  
tube.  
^ Pull the central spout down as far as  
it will go (a), and pull the cover to  
the spout forwards to remove it (b).  
Do not use a needle or similar  
implement. This would damage the  
components.  
^ Replace the stoppers.  
^ Turn the cover around, push the  
insert up and out and then clean both  
parts thoroughly.  
^ Slide the insert back into the cover  
until it clicks into place.  
^ After cleaning, push the jets firmly  
back into place on the central spout,  
ensuring they are secure.  
^ Replace the cover and then push the  
central spout back up into position.  
^ Pull out the jets in the central spout.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Water container  
Waste container  
Empty the water container daily and fill  
with fresh, cold tap water just before  
use.  
After a certain period of time a reminder  
to empty the waste container will  
appear in the display. The waste  
container must be cleaned when this  
message appears. However it is better  
to clean the waste container every day  
to prevent coffee grounds from turning  
mouldy.  
When cleaning, make sure that there  
is no soiling in the area around the  
valve. Otherwise the container will  
not sit correctly and this could result  
in water leaking from the machine.  
There will probably also be water in the  
waste container left over from the  
rinsing process.  
^ The water container can be cleaned  
in the dishwasher or by hand using  
hot water and a little washing-up  
lliquid. Dry thoroughly after cleaning.  
Lining the waste container  
with one or two pieces of  
kitchen paper towel will  
make it easier to tip the grounds out.  
^ Clean the waste container with hot  
water and a little washing-up liquid or  
in the dishwasher, and dry with a  
cloth.  
^ Also clean the now accessible area  
in the machine where the waste  
container sits, thoroughly.  
^ Clean the surface the water container  
sits on thoroughly, taking special  
care to clean the recesses properly.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Drip tray  
There is a sensor in the drip tray which  
causes a message to appear in the  
display when the drip tray is full and  
needs to be emptied. Remove the tray  
and empty and clean it when this  
message appears.  
However, to avoid a build-up of odours,  
the drip tray should be cleaned every  
day.  
^ Clean the drip tray and the grid with  
hot water and a little washing-up  
liquid, or in the dishwasher and dry  
with a cloth.  
After running the last rinse, you  
should leave the drip tray in position  
for a while before cleaning it so that  
you catch any remaining water from  
the system.  
Make sure that the metal contact  
discs at the top of the drip tray are  
cleaned and dried properly. These  
metal discs send a signal to the  
machine when the drip tray is full or  
if it is not in the machine. The discs  
will not convey these messages if  
they are dirty or damp.  
Remove the drip tray carefully, as  
the water in it could be very hot.  
Danger of scalding.  
^ Open the machine door, and  
carefully remove the drip tray from  
the machine.  
^ Push the drip tray with the grid along  
the right hand edge back into the  
machine.  
The grid in the drip tray prevents the  
water from spilling out of the tray  
when it is being carried.  
^ Close the door.  
Drip tray cover  
^ Take the drip tray cover out and  
wash it.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Coffee bean container  
Interior and machine door  
^ First take out all removable parts and  
then clean the interior and the  
The coffee bean container must be  
cleaned by hand with hot water and  
a little washing-up liquid.  
machine door with a mild solution of  
hot water and washing-up liquid.  
^ Take the coffee bean container out of  
the machine and then push the lid  
back to remove it.  
Use your vacuum cleaner to  
remove dry coffee grounds.  
^ Clean the coffee bean container and  
the lid, and then dry them both  
thoroughly.  
^ Replace the lid, and push the  
container back into place in the  
machine.  
Central spout connector  
^ Also clean the small drip tray in the  
lower part of the inside of the door of  
the machine thoroughly.  
The part which connects the brew unit  
and the central spout is located on the  
inside of the machine door.  
^ Clean this connection regularly with a  
damp cloth, taking care not to wipe  
the grease off the cap.  
^ Lubricate the cap at least once a  
month with the silicone grease  
supplied.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Brew unit  
Leave the handle in the same  
position, otherwise the brew unit will  
be out of alignment and you will not  
be able to push it back into the  
coffee machine.  
The brew unit must be cleaned once  
a week by hand and without using  
cleaning agent, because the  
moving parts are lubricated and the  
rubber seals could become brittle in  
a dishwasher.  
^ Remove the water container, waste  
container and the coffee chute cover.  
^ Wipe any remaining coffee off the  
filters. One filter is located in the  
funnel a and the other to the left of  
the funnel b.  
^ Dry the funnel area a to prevent  
ground coffee from sticking to it.  
^ Press the light coloured button under  
the handle of the brew unit a and  
whilst doing so turn the handle in the  
direction of the arrow b.  
^ Clean the inside of the machine and  
remove any coffee residues.  
^ Press the catch in front of the brew  
unit c downwards, and pull the brew  
unit carefully out of the machine.  
Use your vacuum cleaner to  
remove dry coffee grounds.  
^ Place the brew unit on the guide  
runners and, keeping it straight, push  
it into the machine.  
If the brew unit is difficult to remove,  
it is not correctly positioned (see  
"Problem solving guide").  
^ Clean the brew unit thoroughly under  
hot running water without using  
washing-up liquid.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Maintenance  
q
r
H
I
J
L
n
m
C
^ Touch the right arrow sensor to  
highlight the maintenance symbol  
and touch the OK sensor.  
^ Select "Clean brew unit" and touch  
the OK sensor.  
^ Press the light-coloured button under  
the handle of the brew unit a and  
whilst doing so turn the handle in the  
direction of the arrow b.  
^ Select "Start" and touch the OK  
sensor.  
Various messages will now appear in  
the display.  
^ Follow the instructions in the display.  
Degreasing the brew unit  
Depending on the natural oil  
content of the coffee used,  
So that you do not have to  
empty the drip tray too  
the brew unit could become  
blocked. It should therefore be cleaned  
after approx. 200 portions have been  
prepared using the cleaning tablets  
supplied with the machine. These  
have been specially formulated for use  
in this coffee machine and are available  
from Miele or via the internet at  
frequently, place the small  
container under the central spout.  
However, since the inside of the  
machine is also being rinsed through,  
you will still need to empty the drip tray  
so that the cleaning programme can  
continue.  
To remind you to degrease the brew  
unit, the message "Please run the  
cleaning programme" will appear in  
the display after 200 portions. It will  
not go out until the cleaning  
programme has been carried out.  
The cleaning programme lasts for  
approx. 6 minutes.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
When prompted to Drop a cleaning  
Machine front  
tablet in the ground coffee chute,  
If soiling is not removed promptly it  
could cause the surface of the  
machine to alter or discolour.  
Remove any soiling immediately.  
^ Switch the machine off with the  
On/Off sensor.  
^ Clean the front using a damp Miele  
microfibre E-cloth or with a clean  
sponge and a solution of hot water  
and washing-up liquid. Wipe dry  
using a soft cloth.  
^ remove the coffee chute cover and  
open the lid of the coffee chute.  
^ Place a cleaning tablet into the coffee  
chute.  
Make sure that water cannot get  
behind the display.  
^ Close the lid, replace the coffee  
chute cover and close the machine  
door.  
^ Follow the instructions in the display.  
When "Prog. finished" appears in the  
display,  
^ touch the OK sensor.  
The brew unit has now been degreased  
and drinks can be prepared again.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Descaling the machine  
The machine should be descaled  
regularly to ensure that it functions  
correctly. It will remind you when this  
needs to be carried out.  
Only use the descaling tablets  
supplied with the machine. (Make  
sure you use the correct tablets -  
approx. 5 cm diameter, pack of 6).  
These have been specially  
formulated for use in this coffee  
machine and are available from  
Miele or via the internet at  
When only 50 portions can be made  
before the next descaling programme  
has to be run, the following message  
will appear in the display the first time:  
No. of portions until descaling: 50.  
The remaining number of drinks that  
can be made before descaling will now  
show in the display after each drink is  
made.  
Other types of descaling agents will  
damage the machine and affect the  
taste.  
Follow the instructions on the  
package carefully to avoid  
damaging the machine.  
^ Confirm the message by touching the  
OK sensor.  
If you let it run to 0, "Descaling  
programme must be carried out" will  
appear in the display.  
Make sure that you wipe up any  
spillages or splashes of descaling  
agent immediately to avoid  
Touch the OK sensor to start  
the descaling programme. If  
damaging the machine front.  
you do not have time to wait  
After running the descaling  
programme, remember to clean the  
water container and the drip tray  
thoroughly to remove any descaling  
residues.  
until the descaling programme has  
finished (it takes approx. 20 minutes)  
you can switch the machine off.  
However, you will not be able to make  
any more drinks until the descaling  
programme has been carried out.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Descaling the machine  
To run the descaling  
programme  
To dissolve the descaling tablets  
^ take the water container out and fill it  
to the k mark with lukewarm water.  
(Do not use less water than this  
because this would cause the  
Maintenance  
q
r
H
I
J
L
n
m
C
descaling programme to finish before  
it has been completed properly).  
^ Touch the right arrow sensor until  
"Maintenance" is highlighted, and  
confirm with OK, or,  
^ Drop 2 descaling tablets in the  
water. Allow the tablets to dissolve  
fully before shutting the lid and  
putting the water container back in  
the machine.  
^ If the machine is switched off, touch  
the OK sensor whilst the machine is  
switched off.  
During the descaling programme, water  
containing descaling agent will run out  
of the hot water and the central spouts.  
This is followed by an activation period  
before a little more descaling agent is  
dispensed.  
^ Select "Descale" and touch the OK  
sensor.  
^ Select "Start" and touch the OK  
sensor.  
The display will guide you through the  
whole procedure. Please follow the  
instructions to, for example, empty the  
drip tray, fill the water container etc.  
^ When a message asking you to fill  
the water container with fresh  
water appears, you should remove  
the container and rinse it out  
If the machine has already heated  
up, it will cool down for approx.  
10 minutes before starting to run  
the descaling programme.  
thoroughly with clean water. Make  
sure all traces of descaling agent are  
removed, and then fill it up to the k  
mark with clean tap water.  
Water will flow out of the spouts during  
the rinsing process. Because the inside  
of the machine is also cleaned during  
this process you will be prompted to  
Empty the drip tray at the end.  
The descaling programme cannot  
be cancelled once the OK sensor  
has been touched. The programme  
has to be completed through to the  
end. This is a safety measure to  
ensure that the machine is fully  
descaled, and is important for the  
long-term protection of the machine  
and to ensure it functions correctly.  
When Programme finished appears in  
the display,  
^ touch the OK sensor.  
The descaling programme is finished  
and the machine can be used for  
making drinks again.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
. . . nothing appears in the display.  
The master switch is at "0".  
Repairs to electrical appliances  
should only be carried out by a  
suitably qualified and competent  
person in strict accordance with  
current local and national safety  
regulations. Repairs and other work  
by unqualified persons could be  
dangerous. The manufacturer  
cannot be held liable for  
^ Set the master switch to "I".  
The plug is not inserted in the socket  
correctly.  
^ check that the plug is inserted  
correctly and switched on at the  
socket.  
unauthorised work.  
The main fuse has tripped due to a  
problem with the coffee machine, the  
electricity supply or another appliance.  
Various messages will appear in the  
display to warn of certain problems.  
Follow the instructions to remedy the  
problem.  
^ Contact a qualified electrician or  
Miele.  
Other problems or situations which  
occur in general use are described in  
this section. With the help of the  
following notes, minor faults in the  
performance of the machine, some of  
which may result from incorrect  
... the machine suddenly switches  
itself off.  
The machine will switch itself off  
automatically after a certain length of  
time if it is not being used. This time  
depends on the switch off time which  
has been programmed.  
operation, can be put right without  
contacting the Service Department.  
There could be stones in amongst the  
coffee beans. If this is the case, the  
machine will switch itself off  
What to do if ...  
... the machine does not light up after  
it has been switched on.  
automatically within 20 seconds to  
avoid damage. Call the Miele Service  
Department.  
Has the lighting been switched off?  
^ Is it plugged in and switched on at  
the socket?  
^ If it has, switch it back on (see  
"Settings: customising your machine -  
Lighting").  
^ If not, then the lighting is defective.  
Call the Miele Service Department.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
... the lighting suddenly switches  
itself off.  
... only a little or no coffee or  
espresso is dispensed from the  
central spout.  
If the machine has not been used for 15  
minutes the lighting will switch itself off  
automatically. (See "Settings:  
Is the central spout connector cap  
positioned correctly? (See "Guide to the  
machine" - "Interior view").  
customising your machine - Lighting:  
Setting the switch-off time").  
^ Lubricate the cap with the silicone  
grease supplied.  
... the machine does not switch on  
even although the "Switch on at"  
setting for the timer has been  
activated.  
... milk froth or milk is not flowing out  
of the central spout.  
The spout is clogged up.  
The system lock has been activated.  
^ Clean the central spout (taking  
special care to clean the rubber  
stoppers thoroughly) and the milk  
pipework as described in "Cleaning  
and care".  
^ Deactivate it. (See "Settings:  
customising your machine - Safety  
(Activating the System lock)".  
The machine was not used after being  
switched on automatically 3 times in  
succession.  
... the consistency of the milk froth in  
unsatisfactory.  
^ Switch the machine on and make a  
drink.  
The air intake tube is blocked.  
^ Clean the air intake tube (See  
"Cleaning and care" - "Central  
spout"). Any blockages can be  
dislodged by kneading or "blowing  
through" the tube.  
... you cannot read the display.  
If the machine is installed too low down,  
the display can be hard to see.  
^ Try to improve this by adjusting the  
display contrast or brightness (see  
"Settings: customising your machine -  
Setting the display").  
Do not use a needle or similar  
implement. This would damage the  
components.  
The air intake tube is defective.  
^ Remove the air intake tube and  
replace it with the spare part  
supplied.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
... a message appears in the display  
reminding you to fill or replace the  
milk flask even though it is full and  
positioned correctly.  
... the espresso is not hot enough.  
^ Have the cups and system been  
pre-warmed?  
The smaller and thicker the cup, the  
more important it is to pre-warm it.  
^ Clean the flask thoroughly, paying  
particular attention to the area around  
the lid and the neck (see "Cleaning  
and care - Stainless steel milk flask  
with lid").  
^ Check the temperatures the different  
types of coffee have been set to (see  
"Settings: customising your machine -  
Setting the temperature").  
Any soiling in these areas can  
prevent the sensors for the milk flask  
from working properly.  
^ Check whether the brew unit is  
blocked. If it is, clean it (see  
"Cleaning and care - Brew unit").  
... the coffee grinder makes a louder  
noise than usual.  
... coffee is not dispensed, even  
though the beans have been ground  
and there is sufficient water in the  
water container.  
There may be stones in amongst the  
coffee beans, or the bean container  
may have emptied during grinding.  
^ Check whether the slide control for  
the fineness of the coffee is at the  
finest setting, or if the amount of  
coffee to be ground has been set at  
the largest amount.  
^ Switch the machine off immediately.  
^ If the bean container is not empty  
call the Miele Service Department. If  
it is empty fill the container with fresh  
beans.  
Because the process is time controlled,  
it is possible that the process has taken  
so long that there is no time left for  
brewing.  
... the espresso is dispensed too  
quickly.  
The coffee is too coarsely ground.  
^ Select a slightly coarser coffee grind  
setting or a lower setting for the  
amount of coffee to be ground (see  
"Setting the coffee grinder" and  
"Settings: customising your machine -  
Setting the amount of coffee").  
^ Set the grinder on a finer setting (see  
"Setting the coffee grinder").  
... the espresso is dispensed too  
slowly.  
The coffee is too finely ground.  
... the machine door will not close.  
^ Set the grinder on a coarser setting  
(see "Setting the coffee grinder").  
^ Are the containers in position  
correctly?  
^ It might be necessary to adjust the  
door hinges (see "Installation:  
Adjusting the door hinges").  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
... you have selected a drink with milk The beans may have become jammed.  
and "Heating phase" appears in the  
display.  
Pull the bean container out of the  
machine and then push it back in  
again.  
The energy-saving Eco mode is active.  
In this mode, the steam system for  
preparing hot milk or milk froth has to  
heat up. After use the steam system will  
cool down again.  
... a message keeps appearing asking  
you to empty the drip tray even  
though it is empty.  
^ Have the contacts been properly  
cleaned and dried?  
Eco mode is the default setting but this  
can be deactivated, if wished (see  
"Settings - Setting Eco mode"). If Eco  
mode is deactivated, the steam system  
remains hot and ready for use.  
^ Is the drip tray positioned correctly in  
the machine?  
^ Switch the machine off and then back  
on again with the master switch.  
However, with Eco mode deactivated,  
the coffee machine will use  
considerably more energy.  
^ Buff the contacts a little, e.g. with fine  
glasspaper or emery cloth.  
... coffee preparation has been  
interrupted.  
^ If this fault message continues to  
appear, please call the Miele Service  
Department.  
If the water container empties whilst a  
drink is being prepared, a message will  
appear in the display to ask if you wish  
for the drink preparation to continue  
after the water container has been  
refilled. If you do not respond to this  
question with "OK" within 5 minutes, the  
drink will be cancelled.  
... the machine does not rinse  
through when switched on, even  
though the Automatic rinsing  
programme is set to "On".  
If the temperature of the machine is  
above 60 °C, rinsing cannot take place.  
... only water is dispensed when  
coffee has been selected.  
The lid of the ground coffee chute has  
been opened and closed, and then the  
"Make the coffee?" (with ground coffee)  
option has been selected. However, the  
coffee chute has not been filled with  
ground coffee.  
After the drink has been dispensed, the  
coffee machine will revert automatically  
to making coffee with coffee beans.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
... water or milk stops flowing whilst  
programming in the amount to  
dispense.  
^ If the cap is faulty, replace it with the  
spare part supplied.  
... the descaling programme was  
started by mistake.  
The flow stops automatically when the  
maximum fill quantity is reached. The  
maximum quantity is stored in memory. The descaling programme cannot be  
cancelled once you have touched the  
If there was not enough water or milk in  
OK sensor. The programme has to be  
the water container or milk flask, the  
completed through to the end. This is a  
amount that has been dispensed will  
safety measure to ensure that the  
not be saved to memory.  
machine is fully descaled, and is  
^ Fill the water container or the milk  
flask, and repeat the process to  
programme in the amount.  
important for the long-term protection of  
the machine and to ensure it functions  
correctly.  
^ Descale the machine (see "Descaling  
the machine").  
... there is water in the waste  
container.  
This is not a fault. The water is left over  
... the coffee machine makes loud  
from the brewing and cleaning process. noises during the descaling  
programme.  
... there is a lot of residual "coffee  
During the descaling programme you  
water" in the waste container.  
will hear loud noises as water is flushed  
If the slide control for the grinder is set  
to too coarse a setting, too much  
residual "coffee water" can be left in the concern.  
waste container.  
through the machine under high  
pressure. These are no cause for  
... the heating-up time is getting  
^ Set the grinder on a slightly finer  
setting (see "Setting the coffee  
grinder").  
longer, the amount of water coming  
through is incorrect and the machine  
is not performing properly.  
^ If necessary, adjust the amount of  
coffee (see "Settings: customising  
your machine - Setting the amount of  
coffee").  
The machine needs descaling.  
^ Descale the machine (see "Descaling  
the machine").  
Is the central spout connector cap  
positioned correctly (See "Guide to the  
machine" - "Interior view")?  
^ Lubricate the cap of the central spout  
connector with the silicone grease  
supplied.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
... no water comes out of the central  
spout.  
^ Lubricate the cap of the central spout  
connector with the silicone grease  
supplied.  
The filters in the brew unit are dirty.  
^ Remove the brew unit and clean the  
filters with your finger (see "Cleaning  
and care - Brew unit").  
... the message "Push water  
container in as far as it will go"  
appears in the display.  
Water has not been taken in.  
... the brew unit or the waste  
container cannot be pulled out of the ^ The water container has not been  
machine.  
correctly positioned inside the  
machine. Take it out and push it back  
into the machine so that it clicks into  
position.  
The brew unit is not in the correct  
position. This can happen if, for  
example, the machine door is opened  
during grinding or brewing.  
^ This fault message also appears if  
the water container was not correctly  
filled for descaling. Fill the water  
container up to the marker.  
^ Close the door. The brew unit will  
position itself correctly automatically.  
If this fault message still continues to  
appear in the display, repeat the steps  
described above. If neither is the case  
and the fault message still appears in  
the display, call the Miele Service  
Department.  
... the crema is not as it should be.  
^ Check that the grinder setting is not  
too coarse or too fine, and adjust  
accordingly (see "Setting the coffee  
grinder").  
^ Check the temperatures the different  
types of coffee have been set to. If  
... too much crema has formed and is  
the temperature is too high, there will overflowing above the central spout.  
be dark patches in the crema.  
Some types of coffee will produce too  
Reduce the temperature (see  
much crema if the coffee or espresso  
"Settings: customising your machine -  
temperature is set to maximum and the  
Setting the temperature").  
amount of coffee to be ground is set too  
The crema will not form correctly if stale high.  
coffee or an unsuitable coffee blend is  
^ Set a lower temperature and reduce  
used or if the central spout is set too  
the amount of coffee to be ground  
high.  
(see: "Settings: customising your  
machine - Setting the temperature  
... the central spout connector cap is  
and Setting the amount of coffee).  
faulty (See "Guide to the machine" -  
"Interior view").  
^ Replace the cap with the spare part  
supplied.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
... the slide control for the grinder  
setting will not move.  
^ Close the machine door and  
dispense a cup of espresso coffee.  
The grinder setting slide control will  
now move.  
... "Fault - 1" to "Fault - 4" or "Fault -  
80" to "Fault - 83" appears in the  
display.  
^ Push the coffee ejector of the brew  
unit into the correct position.  
^ Switch off the machine using the  
On/Off sensor and wait for one hour  
before switching it on again.  
^ Set the brew unit to one side and  
replace the waste container and the  
water container in the machine.  
If the fault message appears in the  
display again, contact the Miele Service  
Department.  
^ Close the door.  
The brew unit motor will now move  
into the correct position.  
... the message "Fault - 28" appears  
in the display.  
^ When "Fit the brew unit" appears,  
open the door and replace all the  
parts in the machine.  
Enough ground coffee for one portion,  
i.e. a level coffeespoonful of ground  
coffee, passes through the ground  
coffee chute. If there is too much  
ground coffee, the machine is unable to  
process it so that it can be emptied into  
the waste container, and a fault  
^ Close the door.  
If the fault message continues to  
appear in the display, please call the  
Miele Service department, quoting the  
fault code.  
message appears in the display.  
^ Switch the machine off and then back  
on again.  
... the message "Fault - 74" or "Fault -  
77" appears in the display.  
^ Switch the machine off and then back  
on again.  
... the message "Fault - 73" appears  
in the display.  
If the fault message appears in the  
display again, contact the Miele Service  
Department.  
The brew unit cannot be positioned  
correctly.  
^ Take the brew unit out of the machine  
and clean it thoroughly (see  
"Cleaning and care - Brew unit").  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
... the message "Check the brew  
unit" appears in the display.  
The brew unit may be dirty.  
^ Follow the instructions in the display.  
^ Clean the brew unit (see "Cleaning  
and care - Brew unit").  
^ Set a medium grinder setting and a  
medium amount of coffee (see  
"Setting the coffee grinder" and  
"Settings: customising your machine -  
Setting the amount of coffee"). Set the  
amount of coffee to medium in any  
User profiles as well.  
... the ground coffee chute cover  
cannot be pushed in properly.  
^ Is the lid of the ground coffee chute  
closed?  
... it is difficult to open or close the  
door of the machine.  
^ Align the door using the hinges (see  
"Installation - Adjusting the door  
hinges").  
^ Lubricate the cap of the central spout  
connector with the silicone grease  
supplied.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales / Guarantee  
In the event of a fault which you cannot  
correct yourself, or if the appliance is  
under guarantee, please contact:  
– your Miele Dealer  
or  
– Miele (see back cover for contact  
details).  
Please note that telephone calls may  
be monitored and recorded for  
training purposes (UK only).  
When contacting your Dealer or Miele,  
please quote the model and serial  
number of your machine. These are  
shown on the data plate inside the  
machine.  
N.B. A call-out charge will be applied  
for service visits where the problem  
could have been resolved as described  
in these instructions.  
Guarantee  
For information on the appliance  
guarantee specific to your country  
please contact Miele. See back cover  
for address.  
In the U.K. your coffee machine is  
guaranteed for 2 years from the date of  
purchase. However, you must activate  
your cover by calling 0845 365 6640 or  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Saving energy  
AItering the following settings from the  
factory default, will increase the energy  
consumption of the coffee machine:  
– Eco mode  
– Lighting  
– Time of day display  
– Timer  
– Connection of a plate warmer  
When altering these settings, the  
message "This setting increases energy  
consumption" appears in the display.  
You can save energy by switching the  
coffee machine off at the mains when it  
is not being used for a long time.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection U.K., ZA, IRL  
All electrical work should be carried out Non-rewireable plugs BS 1363  
by a suitably qualified and competent  
The fuse cover must be refitted when  
person only, in strict accordance with  
changing the fuse, and if the fuse cover  
current national and local safety  
is lost, the plug must not be used until a  
regulations (BS 7671 in the UK).  
suitable replacement is obtained. The  
Installation, repairs and other work by  
unqualified persons could be  
colour of the correct replacement cover  
is that of the coloured insert in the base  
of the plug, or the colour that is  
embossed in words on the base of the  
plug (as applicable to the design of  
plug fitted).  
dangerous. The manufacturer cannot  
be held liable for unauthorised work.  
Ensure power is not supplied to the  
machine until after installation work has  
been carried out.  
Replacement fuses should be ASTA  
approved to BS 1362 and have the  
correct rating. Replacement fuses and  
fuse covers may be purchased from  
your local electrical supplier.  
The voltage and connected load are  
given on the data plate. Please ensure  
these match the household mains  
supply. The fuse rating is quoted on the  
plug.  
Do not connect the machine to an  
inverter such as those used with an  
autonomous energy source e.g. Solar  
The machine is supplied with a mains  
cable with moulded plug for connection power.  
to a 230 - 240 V mains supply.  
When switched on peak loads in the  
Connection should be made via a fused system can cause the safety switch off  
plug and suitable switched socket  
which is easily accessible after  
installation.  
mechanism to be triggered. This can  
damage the electronic unit.  
The machine must not be used with  
so-called Energy saving devices  
either. These reduce the amount of  
energy supplied to the machine  
causing it to overheat.  
Do not connect via an extension lead.  
For extra safety it is advisable to protect  
the appliance with a suitable residual  
current device (RCD). Contact a  
qualified electrician for advice.  
If the socket is not accessible after  
installation (depending on country) an  
additional means of disconnection must  
be provided for all poles.  
WARNING: THIS APPLIANCE  
MUST BE EARTHED  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Building-in and combination options  
The machine is designed for installation in a tall unit.  
It can also be combined with other Miele built-in appliances. If the coffee machine  
is to be built in above another appliance, there must be a full-width, closed shelf  
between them (except when it is combined with a Miele built-in plate warming  
drawer).  
The plate warmer can be connected directly to a socket at the rear of the  
CVA 5060 coffee machine using a special connection cable (available as an  
optional accessory from your Miele Dealer or the Miele Spare Parts  
Department) so that it can be in use or ready for use whenever the CVA 5060  
coffee machine is being used. This ensures that you always have pre-warmed  
cups ready for use.  
Only a Miele EGW 4000-14 or -29 or 5000-14 plate warmer can be connected  
directly to the CVA 5060 coffee machine. Connecting any other warming  
drawer will result in damage to the appliance.  
The machine can also be installed in a mobile unit which is available to purchase.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Ventilation  
Ensure that the back of the coffee  
machine is sufficiently ventilated, so  
that steam and warm air can dissipate  
freely.  
The ventilation gaps in the furniture  
housing unit and the gap between  
the top of the housing unit and the  
ceiling must be at least 200 cm².  
Otherwise condensation can build up  
and damage the machine or the  
housing unit.  
^ If the housing unit niche is not fitted  
with a sealing strip you should fit a  
Miele sealing strip to the machine  
before installing it. This is fitted from  
the back of the machine.  
Installation  
This sealing strip is available to order  
from Miele.  
Before installation make sure that  
there is no power supply to the  
machine. This also applies should it  
ever need to be taken out of its  
housing unit.  
^ Using the large allen key, unscrew all  
four feet out by about 2 mm.  
The feet can be unscrewed by up to  
approx. 10 mm.  
The machine must be built in before  
it is operated. It is designed for use  
in ambient temperatures ranging  
from +15 °C to +60° C.  
You will need two allen keys (size 3  
and 5) for installing the machine.  
To align the machine front with the  
furniture front ensure that there is a  
sealing strip provided all the way  
around the building-in niche or around  
the coffee machine.  
^ Push the machine all the way into the  
niche until there is a resistance. Then  
check the height to make sure it is  
sitting centrally in the unit and that it  
is level.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
If it is not:  
Adjusting the door hinges  
^ realign the machine by adjusting the  
four feet.  
If the machine door becomes difficult to  
open or close after installation you can  
adjust the hinges to realign it:  
The feet can be unscrewed by up to  
approx. 10 mm.  
^ Connect the machine to the  
electricity supply.  
^ Push it all the way into the niche until  
you feel resistance.  
^ Open the door of the machine, and  
partially tighten the side socket  
screws.  
^ To adjust the door in direction a,  
turn screw a.  
^ To adjust the door forwards or  
backwards (direction b), turn screw  
b.  
^ Carefully turn the lower socket  
screws a to centre the machine in  
the niche.  
^ Tighten both upper socket screws b  
by hand to secure the machine in the  
unit. Do not overtighten them.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 4112  
CVA 5060, CVA 5068  
M.-Nr. 09 248 830 / 01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Vacuum Cleaner STB 101 User Manual
Mr Coffee Coffee Grinder BMH User Manual
Nanda Clock Radio Clocky User Manual
Nikon Camera Lens 2192 User Manual
Nokia Headphones BH 505 User Manual
Nortel Networks Network Card AA1419005 User Manual
Oreck Vacuum Cleaner XL5 205HH User Manual
Oregon Scientific Marine Instruments THC268 User Manual
Panasonic Air Conditioner CS E12DKRW User Manual
Panasonic Universal Remote FP0 Series User Manual