Operating and installation instructions
Built-in coffee machine
CVA 4080
en - GB
To avoid the risk of accidents
or damage to the machine,
it is essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 07 120 790
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Settings: Customising your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Selecting a language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Setting the timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Switch on at: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Switch off after: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Switch off at: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Activate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Selecting or altering a user profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Create . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Change name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Selecting a User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Pre-brewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Automatic rinsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Steam system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Lighting (with the machine switched on) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Lighting (with the machine switched off) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Displaying the number of cups of coffee already dispensed
(Total no. of coffees) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting the water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Main menu (changing the order) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Buzzer tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Plate warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Setting the portion sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Rinsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Grille with drip tray cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Coffee outlet connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Interior and machine door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Degreasing the brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Cappuccinatore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Thorough cleaning in the dishwasher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Stainless steel fronts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Aluminium fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Descaling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Problem solving guide . .? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Electrical connection U.K., ZA, IRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Adjusting the door hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposal of your old machine
Electrical and electronic machines
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your machine.
Please do not therefore dispose of it
with your household waste.
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and can normally be
recycled.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Please dispose of it at your local
community waste collection/recycling
centre, and ensure that it presents no
danger to children while being stored
for disposal.
Dispose of or recycle all packaging
materials safely as soon as possible.
Rather than just throwing these
materials away, please ensure that they
are recycled.
It should be disconnected from the
mains electricity supply by a competent
person.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the machine
External view
aOperating sensor controls. Lowest sensor = On / Off
bDisplay
cOperating sensor controls. Lowest sensor "+ C" = Clear
dUpper lighting
eDoor handle
fHot water spout
gLower lighting
hPlastic grille
iDrip tray cover
jCoffee spouts, height-adjustable
kCapuccinatore spout, removable for cleaning
lCappuccinatore suction tube, removable together with the Cappuccinatore
spout
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the machine
Interior view
aMaster switch
bGround coffee chute cover
cGround coffee chute
dSlide control to select fineness of ground coffee
eCoffee bean container
fDrip tray with grid for easier carrying
gWater container
hBrew unit
iWaste container
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
Safety with children
This machine conforms with all
relevant legal safety requirements.
Improper use can, however, lead to
personal injury and damage to
property.
Keep children away from the
~
machine at all times. It is not a toy! To
avoid the risk of injury do not allow
children to play with it or to use the
controls. Supervise its use by the
elderly or infirm, and supervise children
whilst you are using it. Children's skin is
very sensitive, and reacts to hot
To avoid the risk of accidents and
damage to the machine, please
read these instructions carefully
before using it for the first time. They
contain important notes on the
installation, safety, operation and
care of the machine.
temperatures. Danger of scalding.
Remember that coffee and espresso
are not suitable drinks for children.
Technical safety
Keep these instructions in a safe
place and pass them on to any
future owner.
Before setting up the machine,
~
check it for any externally visible
damage. Never install or attempt to use
a damaged machine. Danger of injury.
Correct application
To avoid the risk of damage to the
~
machine, make sure that the rating on
the data plate corresponds to the
voltage and frequency of the household
supply, before connecting the machine
to the mains supply. Consult a qualified
electrician if in any doubt.
The machine is intended for
~
domestic use only for the preparation of
espresso, cappuccino and coffee. Any
other usage is not supported by the
manufacturer and could be dangerous.
The manufacturer cannot be held liable
for damage resulting from incorrect or
improper use or operation.
The electrical safety of this machine
~
can only be guaranteed when
continuity is complete between it and
an effective earthing system which
complies with local and national safety
regulations. It is most important that this
basic safety requirement is present and
tested regularly, and where there is any
doubt, the household wiring system
should be inspected by a qualified
electrician.
This machine is not intended for use
~
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience or
knowledge, unless they have been
given supervision or instruction
concerning its use by a person
responsible for their safety.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
earthing system (e.g. electric shock).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
The machine must only be operated
While the machine is under
~
~
when built in, to ensure that all
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
electrical components are shielded.
Do not connect the machine to the
~
mains electricity supply by an extension
lead.
Extension leads do not guarantee the
required safety of the machine (e.g.
danger of overheating).
Faulty components must only be
~
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the machine
when Miele replacement parts are
used.
The second electrical connection
~
socket on the back of the machine may
only be used for connecting a Miele
EGW 4000-14 or 4000-29 plate warmer.
Connecting any other appliance would
damage the machine.
The machine is only completely
~
isolated from the electricity supply
when:
The machine is not suitable for use
– the mains fuse is disconnected,
~
in the open air, even when installed in a
mobile unit (optional extra),
– or the screw-out fuse is removed (in
countries where this is applicable),
This equipment may only be used in
~
– it has been switched off at the wall
socket and the plug has been
withdrawn.
mobile installations such as ships,
caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
Never open the outer casing of the
~
machine. Tampering with electrical
connections or components and
mechanical parts is highly dangerous
to the user and can cause operational
faults or electric shock.
Installation work and repairs may
~
only be carried out by suitably qualified
and competent persons in accordance
with current local and national safety
regulations. Repairs and other work by
unqualified persons could be
If the coffee machine is to be built in
~
above another appliance, there must
be a full-width, closed shelf between
them (except when it is combined with
a Miele built-in plate warming drawer).
dangerous and the manufacturer will
not be held liable.
Ensure current is not supplied to the
machine until after installation,
maintenance or repair work has been
carried out.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
Correct use
substances. Do not put drinks
containing sugar, or instant coffee in
the machine.
Caution. Danger of scalding. The
spouts and the liquids dispensed
are very hot.
Never place a drink with ignited
~
alcohol under the steam spouts. The
flames could ignite plastic components
and cause fire damage.
Never look directly at the lighting or
use optical instruments to look at it.
The hot water and steam could
~
The water piping and the
cause scalding. Be very careful when
using these functions. Make sure you
do not come into contact with steam or
hot water. The machine must never be
used for cleaning objects.
~
Cappuccinatore must be rinsed
through and the machine cleaned
thoroughly before the first drink is
prepared.
Only cold, fresh tap water should be
Do not use the coffee machine if the
~
~
used to fill the water container. Warm or
hot water or other liquids could damage
the machine. Change the water every
day to prevent a build up of bacteria.
Cappuccinatore has been dismantled.
Danger of scalding from the hot steam.
Do not use a steam cleaner to clean
~
this machine. Pressurised steam could
reach the electrical components and
cause a short circuit.
Do not on any account use mineral
~
water. Mineral water will cause serious
limescale deposits to build up in your
machine and damage it.
Clean the machine every day to
~
prevent a build-up of bacteria. All parts,
except the brew unit and the coffee
bean container, are dishwasher safe.
Never put anything other than
~
roasted espresso/coffee beans in the
coffee bean container. It must never be
filled with ground coffee as this could
damage the grinder.
The machine should be descaled
~
regularly, depending on the hardness
of the water, with the descaling tablets
supplied. The harder the water, the
more often the machine must be
descaled. The manufacturer cannot be
held liable for damage arising from
insufficient descaling.
The ground coffee chute must never
~
be filled with anything other than
ground coffee or brew unit cleaning
tablets. Otherwise the machine will be
damaged.
Sugar can damage the coffee
Only use the descaling tablets
~
~
machine. Only use pure coffee beans.
Do not use coffee beans which have
been treated with anything containing
caramel, any kind of sugar or any other
supplied by Miele and follow the
instructions on the packet carefully.
Use the exact proportions
recommended. Otherwise the machine
will be damaged.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
Depending on the natural oil content
~
of the coffee used, the brew unit could
become blocked. It is important
therefore to clean the brew unit with a
cleaning tablet after approx. 200
coffees. (A reminder will appear in the
display).
Used coffee grounds should be put
~
with the organic rubbish or on the
compost heap, but not emptied down
the sink, as they could block it.
Never swing from or hang anything
~
on the door when it is open as this
could damage the machine.
In countries where there are areas
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Brief description
This machine can be used to prepare
espresso, coffee, cappuccino, milk
froth and hot water .
If two cups of coffee or espresso are
required at the same time, the sensor
next to "2 portions" must be pressed
twice briefly. The machine will fill the
cups in two stages with a slight pause
in between.
This machine has a container for coffee
beans so that they can be freshly
ground on demand for every cup to
benefit fully from the flavour.
The machine can be programmed to
grind from 6 to 14 g of coffee,
depending on the type. The
The ground coffee can also be
moistened with hot water
programmed amount of coffee will be
the same for all sizes of cup (espresso,
coffee, cappucino).
(Pre-brewing), to develop the aroma.
Then hot water is forced at high
pressure through the ground coffee.
The fineness to which the coffee is
If the machine is used by various
people with different tastes and
preferences, you can programme
specific settings for up to ten
individual users (User profiles).
ground can be adjusted.
The lighting can be switched on
independently of operation. The upper
and lower lighting can also be dimmed
independently of one another.
You can also add a portion of ready
ground coffee should someone prefer
a cup of decaffinated coffee, for
example.
For safety reasons, the electricity
supply to the brewing system and the
coffee grinder cuts out when the
machine door is opened. The machine
also features a system lock to prevent
children from operating it.
To prevent water from remaining in the
pipes, any water left is expelled,
resulting in a little trickle after the coffee
has been dispensed. The coffee is then The easy to use programming facility
ready.
allows, amongst other things, the
language in the display to be changed
and the water hardness to be
programmed in.
The used coffee grounds are
automatically emptied into the waste
container. There is no need to remove
the grounds manually after each cup.
The size of cup can be programmed so
that the correct amount is dispensed. If
you decide to use a smaller cup than
the programmed cup size, preparation
can be halted at any time by pressing
"+ C".
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Brief description
To ensure that the flavour can develop
fully and be maintained for longer the
machine has an additional function to
automatically rinse and pre-warm the
system when the machine is cold. The
same function is used to flush coffee
remains out of the system and the
spouts after use.
The hot water from the hot water spout
is ideal for pre-warming the cups.
So that the machine remains ready for
use but does not use electricity
unnecessarily, it will switch into Energy
saving mode after a certain length of
time.
You can also programme the machine
to switch on and off at a particular
time every day.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the coffee machine
The following notes should help you get to know your coffee
machine before starting to use it.
Sensor controls
This machine has sensor controls which react to touch. To
operate the machine you only need to touch the relevant
sensor.
Display
A double arrow will appear on the right of the display to
indicate that further options are available on the left of the
display. Touch the sensors on the right to scroll up or down
to further options which will then appear on the left of the
display.
To select an option, simply touch the sensor beside it.
Touching "+ C" will call up the previous menu and interrupt
the preparation of coffee.
Continue is used to call up further options and ok is used to
save a setting.
Before using for the first time
The machine must be correctly installed and connected
(see "Electrical connection" and "Installation") and also
cleaned (see "Cleaning and care") before it is used for the
first time.
Remove any protective foil from the front of the machine.
Switching on
^ Touch the "s" sensor to switch on the machine.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the coffee machine
The welcome screen will be displayed each time the machine
is switched on until the 5 drinks (including steam) have been
prepared:
Míele
Willkommen
When you use the machine for the very first time you will be
prompted to select a language.
^ Touch the sensor beside the language you want and then
touch the sensor on the right beside "Continue".
To get the best out of your coffee machine, and to
set it up for your specific requirements please
continue to work through these operating
instructions. It really is worthwhile doing this as you will then
be able to use your coffee machine to the best advantage.
To ensure that any coffee residues from the factory testing
process are removed from the brewing system, please
throw away the first two cups of coffee.
Switching off
To switch the machine off:
^ Touch the "s" sensor.
The time of day will appear in the display and after a while the
display will go out (depending on the setting, see "Settings:
Customising your machine").
If automatic rinsing is switched on, providing that coffee
has actually been dispensed from the machine, the rinsing
process will begin.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding water, coffee beans or ground coffee
Please clean the machine thoroughly before filling the
water container and the coffee bean container, (see
"Cleaning and care").
Filling the water tank
The quality of the water plays an important part in
the overall quality of the coffee. The water
container should therefore be emptied and filled
with fresh water every day. To remind you to do this the
following message will appear in the display when you switch
the machine on: Please fill with fresh water.
Hot water and other liquids could damage the machine.
Use cold, clean tap water and fill the machine every day.
Do not on any account use mineral water. Mineral water
will cause serious limescale deposits to build up in your
machine and damage it.
^ Open the machine door.
^ Pull the water container forwards to remove it.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding water, coffee beans or ground coffee
^ Take off the lid and fill the water container with cold, clean
tap water up to the "Max." mark.
A valve at the front of the water container will ensure that
water cannot escape.
^ Put the lid back on and replace the container in the
machine, pushing it right to the back until it clicks into
position.
The water container must click into position and sit in the
machine correctly to ensure the valve is sealed. If you do
not hear it click into position or the water container
protrudes slightly or does not sit flat on the floor, check
whether the surface that the water container sits on is dirty
and clean it if necessary.
Filling the coffee bean container
Only put roasted espresso or coffee beans in the
container. Anything else, including ground coffee, will
damage the grinder.
Do not use coffee beans which have been treated with
caramel, sugar or other substances. Do not put drinks
containing sugar, or instant coffee in the machine. Sugar
will damage the machine.
^ Pull out the coffee bean container.
^ Push back the lid and fill the container with roasted coffee
beans.
^ Pull the lid forwards again, push the coffee bean container
back into place and close the machine door.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding water, coffee beans or ground coffee
Adding ground coffee
If you want to use ready ground coffee, you can add ground
coffee to the specially designed coffee chute. To do this:
^ Pull the cover for the coffee chute right out of the machine
and open up the lid (1).
^ Use the scoop supplied and place one level scoop of
ground coffee into the coffee chute (2). Close the lid.
^ Push the cover into the machine and close the machine
door.
The display will ask you if you want to make coffee with
ground coffee.
^ Touch the sensor beside "Yes".
^ The display will change to the main menu and you can
select the type of drink (see "Making coffee").
If you have not added any ground coffee, you
must select "No". Otherwise the machine will
assume that there is ground coffee in the chute
and so only water will be dispensed the next time coffee is
made!
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Important: the water piping must be rinsed through every
day and the machine cleaned thoroughly before the first
drink of coffee is prepared. Rinsing will take place
automatically if the Automatic rinsing programme option
has been set to "On" and the machine is cold. Hot water
will run out of both spouts into the drip tray once the
machine has heated up.
If the Automatic rinsing programme option has been set to
"Off", select "Maintenance" to rinse the system (see
"Cleaning and care").
Switching on
To switch the machine on:
^ Touch the "s" sensor.
The following message will appear briefly in the display:
Information
i
Please fill with fresh water.
This is a reminder to fill the water container with fresh water.
The following message will appear in the top line of the
display:
Heating-up phase - do not open the door
ß Descale
ß Standard n
ß Settings F
If the Automatic rinsing programme option has been set to
"On" (factory default setting), the machine will be rinsed
through after heating up and the main menu will appear.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Pre-warming cups
The cups should always be pre-warmed to allow the flavour
to develop and be retained. The aroma of espresso does not
react well to cold.
The smaller the volume of coffee/espresso, the more
important it is to pre-warm the cup. Use a plate warming
drawer if you have one. If not you can warm them as follows:
^ Place the cup under the hot water spout.
^ Touch the lower sensor on the right until "Hot water" is
visible on the left of the display.
^ Touch the sensor beside "Hot water".
^ Allow a little hot water to run into the cup to warm it and
touch "+ C" to switch off the water.
^ Leave the cup to warm for a while and then pour the water
away.
Adjusting the height of the coffee spouts
You can adjust the height of the coffee spouts to suit the
height of the cup so that the espresso or coffee will not cool
down as quickly as it would if the spouts were further away
from the cup. The crema will also be a better quality if the
coffee does not have so far to go!
^ Gently pull the coffee spouts downwards (see illustration).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Preparing espresso and coffee from freshly ground beans
^ Place a cup under the coffee spouts.
The coffee is always dispensed simultaneously from both
spouts.
^ Touch the sensor beside espresso or coffee.
The machine will now grind the coffee beans, pre-brew the
ground coffee (if the programme option "Pre-brewing" has
been set to "On") and the coffee will then be dispensed from
the coffee spouts.
Do not open the machine door during the brewing
process. This will damage the machine.
To ensure that any coffee residues from the factory testing
process are removed from the brewing system, please
throw away the first two cups of coffee.
Cancelling preparation
^ Touch the "+ C" sensor.
Preparation will be stopped immediately.
You can programme the size of portion dispensed
for espresso, coffee and cappuccino according to
individual and national tastes (see "Setting the
portion sizes").
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
To prepare two cups at the same time
^ Place a cup under each of the coffee spouts.
^ Touch the sensor beside espresso or coffee, and then
touch the sensor beside "2 portions".
The machine will now prepare a second portion of espresso
or coffee a few seconds after the first one.
Leave the cups under the coffee spouts until the
main menu appears in the display. The
preparation process is not finished until this
appears.
Making espresso and coffee using ready ground coffee
Before making espresso or coffee using ready ground
coffee, ensure that the main menu is showing in the
display.
After adding ground coffee to the specially designed coffee
chute (see "Adding ground coffee"), the following question
will appear in the display:
Have you added ground coffee
i
and do you want to make a drink now?
ß No
Yes ß
^ Touch the sensor beside "Yes".
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
If you have not added any ground coffee, you
must select "No". Otherwise the machine will
assume that there is ground coffee in the chute
and so only water will be dispensed the next time coffee is
made!
^ Place a cup under the coffee spouts.
The coffee is always dispensed simultaneously from both
spouts.
^ Touch the sensor beside espresso or coffee.
The machine will prepare espresso or coffee, which will then
be dispensed from the coffee spouts.
Do not open the machine door during the brewing
process. This will damage the machine.
At the end of the process, the coffee machine will revert
automatically to making coffee with coffee beans.
Cancelling preparation
^ Touch the "+ C" sensor during preparation.
Preparation will be stopped immediately.
To prepare two cups at the same time
Only one portion can be prepared at a time when using
ready ground coffee. This is because the machine will use all
the ground coffee which has been added to the chute to
prepare one coffee.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Cappuccino and milk froth
Using for the first time or after descaling
Before the coffee machine leaves the factory, the pipework is
completely pumped out. This also happens during the
descaling process. For this reason, water must be pumped
into the pipework before using the machine to make a
cappuccino or to froth milk for the first time or after descaling:
^ Place an empty cup under the Cappuccinatore spout.
^ Touch the sensor beside "Froth".
The Cappuccinatore will now draw water in for a while in
order to fill the pipework. A trickle of water will come out of
the Cappuccinatore spout.
^ Once the machine has stopped, start the "Froth" process
again.
After a while, steam will come out of the Cappuccinatore
spout and there will now be water in the system. You can now
prepare a cappuccino or froth milk.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Cappuccino
To prepare a cappuccino you will need a large china or
porcelain cup and a jug of milk.
Froth is best made from cold milk. Any type of
milk (cows, goats, rice, soya, etc) can be used to
make froth. The fat content is also immaterial.
Because the milk needs to be frothed, only one portion
of Cappuccino can be prepared at one time.
^ Place a jug of milk under the Cappuccinatore suction tube,
and a cappuccino cup under the Cappuccinatore spout.
^ Touch the sensor beside "Cappuccino".
The machine begins to froth the milk, stops briefly and then
some frothed milk is dispensed into the cup whilst the beans
are being ground.
When you have sufficient frothed milk in the cup, stop the milk
frothing process by touching the sensor beside "ok".
^ Then place the cappuccino cup under the two coffee
spouts and touch the sensor beside "ok" to dispense the
coffee.
Your cappuccino is now ready!
To stop the dispensing of coffee touch the sensor beside OK.
Frothing milk
To froth milk separately, use a cold, stainless steel jug that
narrows towards the top.
This helps the froth to maintain its structure.
^ Fill the glass jug supplied with cold milk and place it under
the Cappuccinatore suction tube. Place a stainless steel
jug under the Cappuccinatore spout.
^ Touch the sensor beside "Froth".
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
The machine begins to froth the milk, stops briefly and then
some frothed milk is dispensed into the stainless steel jug.
When you have sufficient frothed milk in the stainless steel
jug, stop the milk frothing process by touching the sensor
beside "ok".
Frothing milk and preparing coffee / espresso at the same time
You can froth milk and prepare coffee / espresso at the same
time (the steam system must be switched on via "Settings")
by first touching the sensor beside the drink you want to
prepare and then touching the lower sensor on the right
beside "Froth".
After frothing milk or making cappuccino
Always clean the Cappuccinatore immediately
after use as it is harder to clean once milk has
dried on. Dried on milk can also block the
Cappuccinatore, resulting in poor frothing results or even
preventing it from working (see "Cleaning and care").
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the coffee grinder
A good espresso or coffee with a thick, even crema (froth)
depends not only on the quality, pressure and temperature of
the water and the quality of the coffee beans, but also on the
quantity of beans and how finely they are ground.
The crema should have an even colour with dark stripes
running through it.
You can set the amount of coffee beans to be ground in the
main menu (see "Settings: Customising your machine" -
"Amount of coffee").
Always adjust the amount of beans to be ground one
stage at a time only and then let the machine grind this
quantity before adjusting the amount again. Otherwise the
machine will be damaged.
There are various ways to tell whether the coffee grinder is
set correctly:
– If espresso or coffee flows too quickly into the cup, it
means that the coffee has been ground too coarsely and
the pressure is not sufficient. The grinder should be set on
a finer setting.
– If espresso or coffee only trickles into the cup, the coffee
has been ground too finely and the coffee will be bitter.
The grinder should be set on a coarser setting.
– If the crema is evenly coloured but pale, this is also a sign
that the coffee beans have been ground too coarsely.
– If the crema is very dark brown on one side, graduating
almost to white on the other, it suggests that coffee beans
have been ground too finely.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the coffee grinder
To alter the grinder setting
^ push the slide control to the left (for finer grinding) or to the
right (for coarser grinding).
You should be able to feel the notches when moving the slide
control.
If the slide refuses to move:
^ close the machine and dispense a cup of espresso coffee.
Then try the slide control again.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
It is easy to customise your machine to suit your exact
requirements. The following settings are available:
Language: Czech, Danish, German, English, Spanish,
French, Italian, Hungarian, Dutch, Norwegian, Polish,
Portuguese, Finnish, Swedish, Turkish, Greek and Russian
Time of day: You can set either a 24 hour or 12 hour clock
and choose to have the Time of day display on or off
Timer: You can activate the Timer and also adjust the
settings. The following options are available in the "Set" menu:
– Switch on at:The machine can be set to switch on at a
specific time of day.
– Switch off after: The machine can be set to switch off
after a pre-set time. A time of between 15 minutes to 9
hours can be set.
– Switch off at: The machine can be set to switch off at a
specific time of day.
Amount of coffee: You can set different amounts of coffee
for espresso, coffee and cappuccino.
Pre-brewing: Long, Normal, Without
Temperature: The temperature for espresso, coffee,
cappuccino and hot water can be set from minimum to
maximum.
Automatic rinsing: On, Off
Steam system: On, Off
Lighting: Automatic (On,Off), Dim (Upper, Lower)
Total no. of coffees: Number of coffees made to date
System lock: Can be activated, Cannot be activated
Water hardness: soft 1, medium 2, hard 3, very hard 4
User profile: Select, Create, (Change name, Delete,
Change (Do not change, When switched on, After each use))
Main menu: The different types of drink can be listed in the
order in which you wish them to appear in the display.
Display: Contrast, Brightness
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Buzzer tones: Volume, Keypad tones
Plate warmer: Automatic, On, Off
Factory default: All settings, User profiles
A more detailed explanation of the programme options is
given in the individual sections.
Selecting a language
If you want to change the language used in the display, use
the Settings menu and follow the flag symbol.
Main menu
ß Maintenance
ß Standard n
ß Settings F
^ Touch the upper or lower sensor on the right until "Settings"
is visible in the left of the display.
^ Touch the sensor beside "Settings".
Settings
ß Language F
ß Time of day
ß Timer
^ Touch the sensor beside "Language".
^ Touch the sensor beside the language you want.
Touch the upper or middle sensor in the right of the display
to call up more languages.
^ Touch the sensor beside "ok".
Everything in the display will now appear in the language you
have selected.
Touch "+ C" to return to the main menu.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Time of day
^ Touch the upper or lower sensor on the right until "Settings"
is visible in the left of the display.
^ Touch the sensor beside "Settings".
Settings
ß Language F
ß Time of day
ß Timer
^ Touch the sensor beside "Time of day".
Display
The Time of day display can be switched on or off.
If the Display On option is selected, the Time of day will
always show in the display even when the machine is
switched off.
If the Display - On for 60 seconds option is selected, the
Time of day display will go out approx. 60 seconds after the
machine is switched off.
A tick will appear beside the option which is currently set.
Touch the sensor beside "ok" to confirm your selection.
Touch "+ C" to return to the main menu.
Clock format
You can now choose for the time to be displayed as a 24 or
12 hour clock by touching the sensor beside 12h clock or 24h
clock.
A tick will appear beside the option which is currently set.
If you touch the sensor next to "ok", "Set the time of day" will
appear in the display.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Setting the time of day
^ Touch the sensor beside "Set".
^ First set the hours by touching the sensors on the right
beside "+" or "-". Then touch the sensor beside "ok".
^ Now set the minutes by touching the sensors on the right
beside "+" or "-". Then touch the sensor beside "ok".
The time of day you have selected is now stored in memory.
Setting the timer
^ Touch the upper or lower sensor on the right until "Settings"
is visible in the left of the display.
^ Touch the sensor beside "Settings".
Settings
ß Language F
ß Time of day
ß Timer
^ Touch the sensor beside "Timer".
^ Touch the sensor beside "Set".
There are three options:
Switch on at:
You can choose a time for the coffee machine to switch on
automatically, e.g. in the morning for breakfast.
^ Touch the sensor beside "Switch on at".
^ Set the time you want the coffee machine to switch on at by
touching the sensors on the right beside "+" or "-".
^ Touch the sensor beside "ok".
If you activate the Timer, the coffee machine will switch on
every day at the time you have set.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
If rinsing is set to "On", the machine will automatically
carry out a brief rinse when it switches itself on.
If the machine has switched itself on automatically 3 times
and no drinks or hot water have been dispensed, the
machine will not switch itself on again automatically! The
programmed times will, however, remain in memory and
can be reactivated after manually switching the machine
on again. This prevents the machine switching itself on
unnecessarily, for example whilst you are away on holiday,
and you have not cancelled the automatic switching on
procedure.
Switch off after:
To prevent the machine using electricity unnecessarily when
it is not being used, it can be set to switch off automatically.
This is done using the "Switch off after" option. A time of
between 15 minutes to 9 hours can be set. This time is
measured from the last time a drink was dispensed.
^ Touch the sensor beside "Switch off after".
For example, 0:15 means that the machine will switch off after
15 minutes.
^ Set the time after which you want the coffee machine to
switch off, by touching the sensors on the right beside "+"
or "-".
^ Touch the sensor beside "ok" to save the setting.
The machine will now switch off after the time you have set.
If rinsing is set to "On" and the machine has been used
for making drinks, it will automatically carry out a brief
rinse before it switches itself off.
Switch off at:
If you always use your machine at a particular time of the day
you can set it to switch off automatically at a specific time.
^ Touch the sensor beside "Switch off at".
^ Set the time at which you want the coffee machine to switch
off by touching the sensors on the right beside "+" or "-".
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
^ Touch the sensor beside "ok".
If you activate the Timer, the coffee machine will switch off
every day at the time you have set.
If rinsing is set to "On" and the machine has been used for
making drinks, it will automatically carry out a brief rinse
before it switches itself off.
Activate:
If you touch the sensor beside "Activate", the "Switch on at"
and "Switch off at" options will appear in the display.
A tick will appear beside the option if it has been activated,
and the machine will then switch on or off at the pre-set time.
Touch the sensor beside the option to add or remove the tick.
Selecting or altering a user profile
To cater for different tastes and preferences, you can enter
up to 10 individual user profiles and also allocate different
settings for amount of coffee, temperature, pre-brewing
and portion size to them later (see "Setting the portion
sizes").
To set a User profile,
^ touch the sensor beside "Settings".
Settings
ß System lock
ß Water hardness
ß User profile
^ Touch the sensor beside "User profile".
A tick will appear beside the user profile which is currently
set.
The Standard profile is allocated with standard settings.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Create
To create a new User profile,
^ Touch the sensor beside "Create".
^ Touch the middle sensor on the right or left of the display
until the first letter is highlighted. Then touch the sensor
beside "Select character".
^ Repeat this step until the name you want for the new User
profile appears in the display.
To delete a letter or number,
^ touch the sensor beside "Delete character".
The last letter or number will be deleted.
To save the name,
^ Touch the sensor beside "ok".
If you do not wish to save the name,
^ touch "+ C".
Delete
If you want to delete the User profile completely,
^ touch the sensor beside "Delete".
^ Touch the sensor beside the name you want to delete.
^ Touch the sensor beside "ok".
As a safety measure, you will be asked if you are sure you
want to delete the name.
^ Touch the sensor beside "Yes" if you are sure that you want
to delete the selected name.
The name you have selected will be deleted from the list.
Change name
^ If you want to change a name, touch the sensor next to
"Change name" and touch the sensor beside "ok".
^ Now change the name and touch the sensor beside "ok".
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Change
You can programme the machine so that it always reverts to
the Standard profile or so that it continues to operate using a
User profile you have set.
To set the profile to be used:
^ touch the sensor beside "Change".
You can now select one of the following:
Do not change
The machine will continue to operate using the User profile
you have selected until you select another User profile.
When switched on
Each time the machine is switched on it will automatically
select the Standard user profile regardless of which Profile
was set before the machine was last switched off.
After each use
The machine will automatically revert to the Standard User
profile each time a drink is dispensed.
^ Touch the sensor beside the setting of your choice, and
then touch the sensor beside "ok".
Selecting a User profile
To select a User profile:
^ Touch the sensor beside "Standard" in the main menu, and
then touch the sensor beside the Profile you wish to select.
(You can also select a User profile directly via the main
menu if this has been activated under the Settings:User
profile menu).
^ Then touch the sensor beside "ok".
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Amount of coffee
Both the flavour and the crema on the coffee depend on the
quantity of ground coffee used.
6 to 14 grams of coffee beans are used per cup, depending
on the type of coffee. The greater the quantity, the stronger
the espresso, coffee or cappuccino.
The quality of the crema is also affected by the quantity:
– If the crema is evenly coloured but pale, it could mean that
too little coffee is being used.
– If the crema is very dark brown on one side, graduating
almost to white on the other, it could mean that too much
coffee is being used.
Select the User profile for which you want to set the amount of
coffee, and
^ touch the sensor beside "Settings".
Settings
ß Time of day
ß Timer
ß Amount of coffee
^ Touch the sensor beside "Amount of coffee".
You can set different amounts of coffee beans to be ground
for espresso, coffee and cappuccino, according to taste.
^ Touch the sensor beside type of drink for which you want to
set the amount of coffee.
^ Touch the middle sensor on the left or the right to set the
amount of coffee higher or lower.
^ Touch the sensor beside "ok" to save the setting for this
User profile in memory.
Pre-brewing
You can programme the machine to pre-brew for a standard
length of time, a longer time or you can switch off the
pre-brewing function. The machine is delivered with
Pre-brewing set at Off (= Without).
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
When the pre-brewing function is switched on, the freshly
ground coffee is first moistened with a little hot water. Then
the remaining water is forced through the moistened coffee at
high pressure.
When the pre-brewing function is switched off, the hot water
is forced through the coffee immediately.
Select the User profile for which you want to set the
pre-brewing function and
^ touch the sensor beside "Settings".
Settings
ß Timer
ß Amount of coffee
ß Pre-brewing
^ Touch the sensor beside "Pre-brewing".
A tick will appear beside the option which is currently set.
^ Touch the sensor beside the setting you want and touch
the sensor beside "ok" to save the setting.
Temperature
The machine can be set at different temperatures to suit
varying coffee drinking habits.
Five temperature levels are available for each drink option
and three for hot water. Maximum is the highest temperature,
minimum the lowest.
Not all types of coffee can withstand a high
temperature. Certain types are too delicate and
the crema on top would not be so good.
If you live in an area which is more than 3000 m above sea
level, set all temperatures lower because water has a lower
boiling point at higher altitudes.
Select the User profile for which you want to set the
temperature of the drinks, and
^ touch the sensor beside "Settings".
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Settings
ß Amount of coffee
ß Pre-brewing
ß Temperature
^ Touch the sensor beside "Temperature".
You can set different temperatures for espresso, coffee,
cappuccino and hot water.
^ Touch the sensor beside the type of drink for which you
want to set the temperature.
^ Touch the upper or middle sensor on the right until the
temperature you want appears and then touch the sensor
beside the required temperature.
A tick will show which temperature is currently set for this
type of drink.
^ Touch the sensor beside "ok".
You can now alter the temperatures for the other drinks in the
same way.
^ If you do not want to alter the temperature of any of the
other drinks, touch "+ C".
Automatic rinsing
To remove any coffee grounds from the system, the water
piping must be rinsed through before the first drink of the day
is prepared. If programme option "Automatic rinsing" is set to
"On", rinsing will start automatically when the machine is
switched on and cold. This will also pre-heat the system
because hot water is used for the rinse process. A message
will appear in the display to let you know what is happening.
The machine will also run an automatic rinse before it
switches off, if it has been used to prepare a drink.
The machine is delivered with the Automatic rinsing
option set to "On".
To switch off Automatic rinsing,
^ touch the sensor beside "Settings".
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Settings
ß Pre-brewing
ß Temperature
ß Automatic rinsing
^ Touch the sensor beside "Automatic rinsing".
A tick will appear to show if the Automatic rinsing option is on
or off.
^ Touch the sensor beside "On" or "Off" and then touch the
sensor beside "ok" to save the setting.
It is a good idea to set this option to "On" so that
the rinse process cannot be forgotten.
Steam system
The machine has two heating systems. This means that the
coffee machine can be used not only to prepare
espresso/coffee but also to prepare milk froth/cappuccino
using steam at any time. However, the steam system can be
switched off if the machine is rarely used to prepare milk
froth/cappuccino. This saves energy as the steam heating
system is not heated up.
If you select froth or cappuccino when the steam heating
system is switched off, the machine will not produce any
steam until it has heated itself up.
The steam heating system remains active as long as the
machine is still on.
The machine is delivered with the steam system set to On.
To switch off the steam system,
^ touch the sensor beside "Settings".
Settings
ß Temperature
ß Automatic rinsing
ß Steam system
^ Touch the sensor beside "Steam system".
A tick will appear to show if the Steam system is on or off.
^ Touch the sensor beside "On" or "Off" and then touch the
sensor beside "ok" to save the setting.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Lighting (with the machine switched on)
The "Lighting" option in the "Settings" menu allows you to
decide which type of lighting to have when the machine is
switched on. The lighting can be switched on automatically,
switched off or even dimmed. The dimming option also allows
you to dim just the upper or lower lighting to suit your
individual requirements.
Never look directly at the lighting or use optical
instruments to look at it.
To alter the lighting,
^ touch the sensor beside "Settings".
Settings
ß Automatic rinsing
ß Steam system
ß Lighting
^ Touch the sensor beside "Lighting".
^ Touch the sensor beside "Automatic" or "Dim".
The options are:
Automatic
On:
The lighting will come on when the machine is switched on
and will go out when the machine is switched off.
Off:
The lighting will not come on.
Dim
The brightness of the upper and lower lighting can be set
independently of one another.
^ Touch the sensor beside "Upper" or "Lower".
^ Touch the middle sensor on the left or the right to set the
brightness.
^ Touch the sensor beside "ok" to save the setting.
^ Touch the "+ C" sensor to return to the previous settings.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Lighting (with the machine switched off)
14:18
ß Lighting
W ß
"Lighting" in the initial menu (which is only visible if the time of
day display has been set) allows you to select the type of
lighting for when the machine is switched off. This means
that the machine can be lit up even when it is not being used.
You can switch the lighting on or off or use the dim option if
you find that the upper or lower lighting is too bright or not
bright enough, meaning that you can adjust it to suit your
individual requirements. You can also set a specific time after
which the lighting will switch off.
The options are:
Status
On
The lighting remains on, even when the machine is switched
off.
Off
The lighting is switched off when the machine is switched off.
Switch off after
^ Touch the sensor beside "Switch off after".
For example, 0:15 means that the lighting will switch off after
15 minutes. A time of between 15 minutes up to 9 hours can
be set.
^ Set the time after which you want the lighting to switch off
at by touching the sensors on the right beside "+" or "-".
^ Touch the sensor beside "ok" to save the setting.
The lighting will now switch off after the time you have set.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Dim
These are the same as the settings for "Dim" when the
machine is switched on.
Touch the sensor beside "ok" to save the settings.
Touch "+ C" to return to the previous options.
Displaying the number of cups of coffee already dispensed
(Total no. of coffees)
If you touch the sensor beside "Total no. of coffees", the
number of espressos, coffees and cappuccinos dispensed to
date will appear in the display. The Settings menu will
reappear after a few seconds or if you touch the sensor
beside "ok".
System lock
The machine can be locked to ensure that it is not operated
by unsupervised children or persons who are unacquainted
with the operating instructions.
Before you can activate the system lock you must first do the
following via the Settings menu:
^ Touch the sensor beside "Settings".
Settings
ß Lighting
ß Total no. of coffees
ß System lock
^ Touch the sensor beside "System lock".
The tick will show if the system lock has been set to "Can be
activated" or "Cannot be activated".
^ Touch the sensor beside "Can be activated".
If you touch the sensor beside "Cannot be activated" then
the machine cannot be locked (safety feature).
^ Touch the sensor beside "ok" and switch off the machine.
^ Touch the lower sensor on the right beside W.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
^ Touch the sensor beside "On" and then the sensor beside
"ok".
The machine is now locked and cannot dispense. A closed
lock symbol X will appear in the display.
To deactivate the system lock
^ Touch the lower sensor on the right beside X.
^ Touch the sensor beside "Off" and then the sensor beside
"ok".
The machine is now unlocked and can be used to make
drinks again.
Setting the water hardness
For trouble-free operation of the coffee machine, and to
ensure that the descaling reminder appears in the display at
the appropriate time, it is important to set the water hardness
level. The water hardness level indicates how much calcium
is dissolved in the water. The higher the calcium content, the
harder the water, and the harder the water, the more often the
machine will need to be descaled.
The machine measures the amount of water which has been
taken in (including the amount required for producing steam).
The amount of water which the machine can use before it
needs to be descaled will depend on the water hardness
level set. Less water will be used in hard water areas than in
soft water areas.
Your local water authority will be able to tell you the hardness
of water in your area. Alternatively, you can measure the
hardness yourself using the enclosed test strip:
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
^ Dip the strip in your drinking water for approximately a
second, then shake off any excess water. The result will be
evident after about a minute.
If the water is harder than 40 °d / 7.0 mmol/l, limescale will
build up more rapidy than with soft water. Descaling will
need to be carried out more regularly than stated to
prevent limescale damage to the machine.
The machine has four programmable levels:
Level
Hardness
(local water)
°d
mmol/l
Water through-flow
in litres
(machine)
Steam through-flow
in minutes
Soft 1
1 (soft)
0 - 3
4 - 7
0 - 0.6
0.7 - 1.3
1.3 - 2.5
2.5 - 3.8
approx. 200 l
approx. 240 min
Medium 2
Hard 3
1 (soft)
approx. 160 l
approx. 180 min
2 (medium)
7 - 14
approx. 120 l
approx. 120 min
Very hard 4 3 (hard)
4 (very hard)
14 - 21
approx. 80 l
above 21 above 3.8
approx. 60 min
To set the correct water hardness level,
^ touch the sensor beside "Settings".
Settings
ß Total no. of coffees
ß System lock
ß Water hardness
^ Touch the sensor beside "Water hardness".
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
^ Touch the upper or middle sensor on the right until the
correct water hardness is visible on the left of the display.
^ Touch the sensor beside the correct water hardness.
A tick will appear beside the water hardness which is
currently set.
^ Touch the sensor beside "ok" to save the setting.
Main menu (changing the order)
The different drink options appear in the main menu display
in a particular order. You can see the full list of drinks in the
display by scrolling down. If, for example, your favourite drink
is cappuccino, you can place cappuccino first in the list
using this menu function, avoiding the need to scroll down to
cappuccino every time.
^ Touch the sensor beside "Settings".
Settings
ß User profile
ß Main menu
ß Display
^ Touch the sensor beside "Main menu".
Set programme for position 1
ß Espresso
p
ß Coffee
ß Back
^ Scroll down until the drink you require at the top of the
menu appears in the display, and touch the sensor beside
the drink.
A tick appears next to the drink selected.
^ Touch the sensor beside "Continue".
You will now be asked to set the programme for position 2.
Proceed as for position 1.
Once 4 positions have been set, the machine comes out of
the main menu programme automatically.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Display
You can adjust both the contrast and the brightness of the
display:
^ Touch the sensor beside "Settings".
Settings
ß User profile
ß Main menu
ß Display
^ Touch the sensor beside "Display".
^ Touch the sensor beside Contrast or Brightness and set the
level with the middle sensor on the right or left of the
display.
^ Touch the sensor beside "ok" to save the setting.
Buzzer tones
You can choose for an audible tone to sound each time a
sensor is touched.
^ Touch the sensor beside "Settings".
Settings
ß Main menu
ß Display
ß Buzzer tones
^ Touch the sensor beside "Buzzer tones".
You can now choose whether you want an audible tone to
sound each time a sensor is touched (touch the sensor
beside "On") or not (touch the sensor beside "Off").
If you select "On", you can then set the volume. The higher
the number, the louder the audible tone.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Plate warmer
You can connect a Miele EGW 4000-14 or EGW 4000-29
plate warmer to the coffee machine using a special
connection cable available as an optional accessory from
your Miele Dealer or the Miele Spare Parts Department.
Once the plate warmer is connected, you will need to "install"
the plate warmer in the "Settings" menu.
^ Touch the sensor beside "Settings".
Settings
ß Display
ß Buzzer tones
ß Plate warmer
^ Touch the sensor beside "Plate warmer".
There are three options:
Automatic
The plate warmer will switch on and off together with the
coffee machine. The plate warmer must be switched on with
the On/Off control.
If you have programmed the coffee machine to switch on at a
specific time, the plate warmer will always switch on approx.
30 minutes before the coffee machine is due to switch on so
that your cups are warmed up ready for your coffee!
On
You can switch the plate warmer on and off manually
whenever you want, independently of the coffee machine.
Off
The plate warmer will not switch on because the coffee
machine is not supplying it with any electricity. The coffee
machine is delivered with "Off" as the default setting.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings: Customising your machine
Factory default
Selecting "Factory default" will take you into the sub-menu.
You can then select whether you want to reset All settings
back to the factory default settings (Timer, Automatic rinsing,
Steam system, Lighting, System lock, Water hardness,
Display, Plate warmer, the most recently selected type of
coffee, User profiles and all the Standard settings), or to
delete the User profiles.
If you want to select either of these two options,
^ touch the sensor beside "Yes" to reset the factory default
settings. Touch the sensor next to "No" if you want to keep
your settings rather than resetting them to the factory
default.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the portion sizes
The flavour of the coffee produced depends on the type of
coffee, the amount of coffee used, how finely the beans are
ground and particularly, the quantity of water used. Not all
cups are the same size. To ensure the machine uses the right
amount of water to suit your taste and your cups, you can
programme in the amount to be used.
Espresso a quantity of water of between approx. 30 up to
125 ml can be set,
Coffee a quantity of water of between approx. 30 up to
250 ml can be set,
Hot water a quantity of between approx. 30 up to 250 ml
can be set,
Cappuccino - cappuccino uses (milk) froth and espresso.
The time for frothing milk can be individually controlled. The
quantity of water for espresso can be between approx. 30
up to 125 ml.
^ Place the cup you want to use under the coffee spouts
(with cappuccino sized cups, place the cup underneath
the Cappuccinatore spout first of all).
^ Touch the sensor beside the type of drink for which you
want to set the water quantity until "Programme the amount"
appears under the type of drink in the display.
^ Then stop touching the sensor.
^ When you have sufficient hot water in the cup, touch the
sensor next to "ok".
When setting the Cappuccino amount place the cup
under the coffee spouts and touch the sensor until
"Programme the amount" appears.
The portion size for the type of drink is now set and stored in
memory. The quantity of water which you have set for the
particular type of drink will now be dispensed every time this
drink is prepared.
If you do not stop the flow of water whilst setting the amount,
the flow will stop automatically when it has reached the
maximum amount possible. This amount is then memorised
for the drink.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Always allow the machine to cool down before cleaning.
Danger of scalding.
Do not clean the machine with a steam cleaner as this will
damage the machine.
Never use cleaners containing chlorides, acids, soda or
scouring agents. These would damage the surface.
It is important to clean the machine regularly, as the used
coffee grounds will soon go mouldy.
With the exception of the brew unit and the coffee bean
container, all removable parts can be cleaned in a
dishwasher. If the parts are cleaned frequently in a
dishwasher, they can become discoloured from regular
contact with food residues (e.g. tomatoes) in the dishwasher.
Rinsing
If you have set the automatic rinsing function to off because
you do not want the machine to rinse the brewing system
automatically, you will need to rinse the system through
manually. This needs to be done before making the first drink
of the day and also after making the last drink of the day.
Main menu
ß Maintenance
ß Standard n
ß Settings F
^ Touch the upper or lower sensor on the right until
"Maintenance" is visible on the left of the display.
^ Touch the sensor beside "Maintenance".
^ Touch the sensor beside "Rinse system".
Water will run out of the coffee spouts and the hot water spout
and the piping will be rinsed through. Remember to place a
suitable container under the spouts first!
Touch "+ C" after the process has finished.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Water container
Empty the water container daily and fill with fresh, cold
drinking water just before use.
When cleaning, make sure that there is no soiling in the
area around the valve. Otherwise the container will not sit
correctly and this could result in water leaking from the
machine.
^ Clean the surface the water container sits on thoroughly.
Waste container
After a certain period of time a reminder to empty the waste
container will appear in the display. The waste container must
be cleaned when this message appears. However it is better
to clean the waste container every day to prevent coffee
grounds from turning mouldy.
There will probably also be water in the waste container left
over from the rinsing process.
Lining the waste container with one or two pieces
of kitchen paper towel will make it easier to tip the
grounds out.
^ Pull the waste container forwards to remove it.
^ Clean the waste container with hot water and a little
washing-up liquid or in the dishwasher and dry with a cloth.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Also clean the now accessible area in the machine where
the waste container sits, thoroughly.
^ Push the waste container fully back into the machine.
Drip tray
There is a sensor in the drip tray which causes a message to
appear in the display when the drip tray is full and needs to
be emptied. Remove the tray and empty and clean it when
this message appears.
However, to avoid a build-up of odours, the drip tray should
be cleaned every day.
After running the last rinse you should leave the drip tray
in position for a while before cleaning it so that you catch
any remaining water from the system.
^ Open the machine door and carefully remove the drip tray
from the machine.
There is a grid in the drip tray. This grid prevents the water
from spilling out of the drip tray when it is being carried.
^ Clean the drip tray and the grid with hot water and a little
washing-up liquid, or in the dishwasher and dry with a
cloth.
Make sure that the metal contact discs at the top of the
drip tray are cleaned and dried properly. These metal
discs send a signal to the machine when the drip tray is
full or if it is not in the machine. The discs will not convey
these messages if they are dirty or damp.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Push the drip tray with the grid along the right hand edge
back into the machine.
^ Close the machine door.
Grille with drip tray cover
^ Take the grille and drip tray cover out and wash them.
Coffee bean container
The coffee bean container must be cleaned by hand with
hot water and a little washing-up liquid.
^ Take the coffee bean container right out of the machine
and then push the lid back to remove it.
^ Clean the coffee bean container and the lid and then dry
them both thoroughly.
^ Push the lid back on and push the container back into
place in the machine.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Coffee outlet connection
The part which connects the brew unit and the coffee outlet is
located on the inside of the machine door.
^ Clean this connection regularly with a damp cloth, taking
care not to wipe the grease off the seal.
^ Lubricate the seal at least once a month with the grease
supplied.
Interior and machine door
^ First take out all removable parts and then clean the interior
and the machine door with a mild solution of hot water and
washing-up liquid.
You can use a vacuum cleaner to remove dry
ground coffee residues.
^ Also clean the small drip tray in the lower part of the inside
of the door thoroughly.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Brew unit
The brew unit must be cleaned manually once a week
because the moving parts are lubricated and the rubber
seals could become brittle in a dishwasher.
^ Remove the water container, waste container and the
coffee chute cover.
^ Press the light coloured button under the handle of the
brew unit a and whilst doing so turn the handle in the
direction of the arrow b.
^ Press the catch in front of the brew unit c downwards and
pull the brew unit carefully out of the machine.
If this can only be done with difficulty, it is not correctly
positioned, (see "Problem solving guide").
^ Clean the brew unit thoroughly under hot running water
without washing-up liquid.
Leave the handle in the same position, otherwise the
brew unit will be out of alignment and you will not be able
to push it back into the coffee machine.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Wipe any remaining coffee off the two filters. One filter is
located in the funnel a and the other to the left of the
funnel b.
^ Dry the funnel area a to prevent ground coffee from
sticking to it.
^ Clean the inside of the machine and remove any coffee
residues. It is best to use a vacuum cleaner to remove dry
ground coffee.
^ Place the brew unit on the guide runners and keeping it
straight, push it into the machine.
^ Press the light coloured button under the handle of the
brew unit a and whilst doing so turn the handle in the
direction of the arrow b.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Degreasing the brew unit
Depending on the natural oil content of the coffee
used, the brew unit could become blocked. It
should therefore be cleaned after approx. 200
portions have been prepared using the cleaning tablets
supplied with the machine. These have been specially
formulated for use in this coffee machine and are available
from your Miele Dealer, from the Miele Spare Parts
Department, or via the internet (depending on country).
To remind you to degrease the brew unit, the message
"Please run the cleaning programme" will appear in the
display after 200 portions. It will not go out until the
cleaning programme has been carried out.
The cleaning programme lasts for approx. 6 minutes.
Main menu
ß Maintenance
ß Standard n
ß Settings F
^ Touch the upper or lower sensor on the right until
"Maintenance" is visible on the left of the display.
^ Touch the sensor beside "Maintenance".
^ Touch the sensor beside "Cleaning".
Various messages will now appear in the display. Please
follow the prompts.
So that you do not have to empty the drip tray too
frequently, place a container which can hold
approx. 1.2 litres unter the coffee spouts.
However, since the inside of the machine is also being rinsed
through, you will still need to empty the drip tray so that the
cleaning programme can continue running.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
When Please place a cleaning tablet in the ground coffee
chute appears in the display,
^ Remove the coffee chute cover and open the lid of the
coffee chute.
^ Place a cleaning tablet into the coffee chute.
^ Close the lid, replace the coffee chute cover and close the
machine door.
^ Touch the sensor beside "Continue".
Carry out the prompts which appear in the display.
When Cleaning programme finished appears in the display,
the brew unit has now been cleaned of all residues and
cleaning agents.
^ Touch the "+ C" sensor to return to main menu.
Cappuccinatore
The Cappuccinatore must be cleaned each time milk is
frothed (including for cappuccino) so that milk residues do
not dry on and cause a blockage.
Carrying out the "Rinse Cappuccinatore" programme is
not a substitute for cleaning it thoroughly in the
dishwasher.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Touch the sensor beside "Maintenance".
^ Touch the sensor beside "Rinse Cappuccinatore".
^ Place a glass of water under the suction tube and a
descaling funnel under the Cappuccinatore spout to direct
the water safely into the drip tray and touch the sensor
beside "ok".
The Cappuccinatore will draw up water for a while to rinse it
through.
Remember to empty the drip tray afterwards.
Thorough cleaning in the dishwasher
The Cappuccinatore needs to be cleaned thoroughly. To do
this, remove the parts from the machine and clean them in
the dishwasher. It is very important to do this regularly to
avoid the Cappuccinatore becoming blocked over time with
dried on milk residues which are not removed by the normal
rinsing cycle.
^ Turn the cover above the spout in the direction of the arrow
a.
^ Carefully pull the Cappuccinatore spout and suction tube
downwards out of the machine b.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Dismantle the parts. Remove the part with the seals by
turning and then pulling it.
^ Wash the parts in the dishwasher. After cleaning, lubricate
the seals with the grease supplied.
Make absolutely sure that none of the small holes in the
parts are blocked (see arrow). You can knead the soft
parts to unblock them. This is important for trouble-free
operation of the machine. On no account use a needle as
this would damage the parts.
^ Reassemble the parts as shown. Make sure that the lugs
(see arrow) are underneath and
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ that all the guide points line up.
^ Place the Cappuccinatore in the machine from below a
and turn the cover above the spout in the direction of the
arrow b.
Do not use the machine without the Cappuccinatore in
place. Steam would escape, uncontrolled, from the
machine. Danger of scalding and the machine would be
damaged.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Machine front
^ Clean the front of the machine with a solution of hot water
and washing-up liquid applied with a damp cloth. Wipe
everything dry with a soft cloth.
Make sure that no water penetrates behind the display.
E-Cloth
A microfibre "E-Cloth" is available from the Miele UK Spare
Parts Department, or via the internet (depending on country),
which is suitable for cleaning surfaces such as stainless
steel, glass, plastic and chrome without the use of chemicals.
Avoid the following on all types of front:
– cleaning agents containing soda, ammonia, acids or
chlorides,
– solvent-based cleaning agents,
– cleaning agents containing descaling agents,
– dishwasher cleaner,
– abrasive cleaning agents, e.g. powder cleaners and cream
cleaners.
– hard, abrasive sponges, e.g. pot scourers and brushes or
sponges which have been previously used with abrasive
cleaning agents,
– sharp, metal scrapers
When descaling the machine, wipe up any spillages or
splashes of descaling agent immediately.
To prevent the risk of scratches and damage to stainless
steel and aluminium surfaces, pay particular attention to
the following cleaning instructions.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Stainless steel fronts
The machine front is susceptible to scratches and abrasion.
Stainless steel surfaces can be cleaned using a Miele E-Cloth
or with a proprietary non-abrasive cleaning agent designed
specifically for use on stainless steel. N.B. Do not use
stainless steel cleaning agents on the controls.
To help prevent re-soiling, a conditioning agent
for stainless steel, (available from the Miele Spare
Parts Department or via the internet, depending
on country) can also be used. Follow the manufacturer's
instructions on the label.
Aluminium fronts
Aluminium is affected by the way that light falls on it, by the
surrounding environment and by the angle you observe it
from.
The surfaces and controls may suffer discolouration or
damage if soiling is left on for too long. Remove any
soiling straight away.
The machine front is susceptible to scratches and abrasion.
Avoid:
– stainless steel cleaning agents.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Descaling the machine
The machine should be descaled regularly to ensure that it
functions correctly. It will remind you when this needs to be
carried out.
When only 50 portions can be made before the next
descaling programme has to be run, the following message
will appear in the display for the first time: "50 drinks can be
made. Please run the descaling programme!".
This message will now appear (counting down) after each
drink (coffee, espresso, cappuccino, hot water, steam) is
dispensed. If you let it run to 0, the machine will stop working.
Touch the sensor beside "Descale" to start the
descaling programme. If you do not have time to
wait until the descaling programme has finished (it
takes approx. 20 minutes) you can switch the machine off.
However, you will not be able to make any more drinks until
the descaling programme has been carried out.
You should only use the descaling tablets supplied with
the machine. These have been specially formulated for
use in this coffee machine and are available from your
Miele dealer, the Miele Spare Parts Department, or via the
internet (depending on country).
Other types of descaling agents will damage the machine
and affect the taste.
Follow the instructions on the package carefully to avoid
damaging the machine.
You must use the funnels provided with the machine.
Otherwise there is a risk of descaling agent splashing the
front of the machine. When descaling the machine, wipe
up any spillages or splashes of descaling agent imme-
diately to avoid damaging the machine front.
After running the descaling programme, remember to
clean the water container and the drip tray thoroughly
to remove any descaling residues.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Descaling the machine
To run the descaling programme
^ If you want to descale the machine before it has heated
up touch the sensor beside "Descale" in the initial menu to
begin the descaling programme.
^ If you want to descale the machine without being
prompted to do so by the reminder (because your water
is very hard, for example), select the "Maintenance" option,
^ Touch the sensor beside "Descale" and then the sensor
beside "ok".
The display will guide you through the whole procedure.
Please follow the instructions to, for example, empty the drip
tray, fill the water container etc.
If the machine has already heated up, it will cool down
for approx. 10 minutes before starting to run the
descaling programme.
The descaling programme cannot be cancelled once the
"OK" sensor has been touched. The programme has to be
completed through to the end. This is a safety measure to
ensure that the machine is fully descaled, and is important
to protect the machine and ensure it functions correctly.
^ When the message appears in the display asking you
– to add descaling agent to the water container, take the
water container out and fill it up to the k mark with
lukewarm water. (Do not use less water than this
because this would cause the descaling programme to
finish before it has been completed properly).
Add 2 descaling tablets to the water. Allow the tablets to
dissolve fully before shutting the lid and putting the water
container back in the machine.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Descaling the machine
^ Fit the descaling funnels under the spouts as illustrated.
The bottom of the funnel fits into the drip tray to enable the
descaling agent to be collected in it.
During the descaling programme, water containing descaling
agent will run out of the hot water and the cappuccinatore
spouts. This is followed by an activation period before a little
more descaling agent is dispensed.
^ When a message asking you to fill the water container
with fresh water appears, you should remove the
container and rinse it out thoroughly with clean water. Make
sure all traces of descaling agent are removed, and then fill
it up to the k mark with clean tap water.
Water will flow out of the spouts during the rinsing process.
The drip tray will need to be emptied several times during
this process.
When descaling has been completed, Programme finished
will appear in the display. Follow the instructions in the
display. The machine will then run a short rinsing cycle.
The pipework is completely pumped out during the
descaling process. For this reason, water must be
pumped back into the pipework before using the machine
to make a cappuccino or to froth milk after descaling. (See
"Making coffee: Cappuccino and milk froth").
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Repairs to electrical appliances should only be carried out
by a suitably qualified and competent person in strict
accordance with current local and national safety
regulations. Repairs and other work by unqualified
persons could be dangerous. The manufacturer cannot be
held liable for unauthorised work.
Various messages will appear in the display to warn of certain
problems. Follow the instructions which appear in the display
to remedy the problem.
The following problems will not be indicated in the display,
but can be dealt with as follows:
What to do if . . .
. . . the machine does not light up after it has been
switched on.
^ Is the machine locked?
^ Has the lighting been switched off (see "Settings,
Lighting")?
^ If not, then the lighting is defective. Call the Miele Service
Department.
. . . the heating-up phase takes too long.
If the door is opened during the heating-up phase, e.g. to fill
the water container, the heating elements switch off. They will
start heating up again as soon as the door is closed.
. . . nothing appears in the display.
The machine is not connected to the electricity supply.
^ Is the master switch in the 0 position?
^ Is it plugged in and switched on at the socket?
^ Check that the fuse is not defective and that the mains fuse
has not tripped. If it has, contact the Miele Service
Department.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the machine suddenly switches itself off.
The machine will switch itself off automatically after a certain
length of time if it is not being used. This time depends on the
switch off time which has been programmed.
The water temperature could be too high. The machine will
remain switched off until the water has cooled down
sufficiently.
Check that the plug is correctly fitted in the socket.
There could be stones in amongst the coffee beans, in which
case the machine will switch itself off automatically within 20
seconds to avoid damage. Call the Service Department.
. . . the lighting suddenly switches itself off.
The lighting will switch off automatically after 10 minutes of
inactivity unless a different lighting setting has been selected.
. . . you cannot read the display.
If the machine is installed too low down, the display can be
hard to see.
^ Try and improve this by adjusting the display contrast or
brightness.
. . . no water or steam comes out of the Cappuccinatore
spout.
^ Remove the water container and replace it.
The spout is blocked if still no water or steam comes out, or if
only a little comes out.
^ Clean the Cappuccinatore as described in "Cleaning and
care - Cappuccinatore". Make absolutely sure that none of
the small holes in the parts are blocked. You can knead the
soft parts or blow through them to unblock them.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the coffee grinder makes a louder noise than usual.
There could be stones in amongst the coffee beans.
^ Switch the machine off immediately.
^ Contact the Miele Service Department.
. . . the coffee grinder makes less noise than usual.
The coffee bean container is empty. A message will soon
appear in the display.
^ Wait until the grinder makes no noise at all, then refill the
bean container with beans.
. . . the espresso is dispensed too quickly.
The coffee is too coarsely ground.
^ Set the grinder on a finer setting.
. . . the espresso is dispensed too slowly.
The coffee is too finely ground.
^ Set the grinder on a coarser setting.
. . . the espresso is not hot enough.
^ Have the cups and system been pre-warmed?
The smaller the cup, the more important it is to pre-warm it.
^ Check the temperatures the different types of coffee have
been set to.
^ Check whether the brew unit is blocked. Clean it if it is
blocked.
. . . coffee is not dispensed, even though the beans have
been ground and there is sufficient water in the water
container.
^ Check whether the slide control for the fineness of the
coffee is at the finest setting, or if the amount of coffee to
be ground has been set at the largest amount.
Because the process is time controlled, it is possible that the
process has taken so long that there is no time left for
brewing.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
^ Select a slightly coarser coffee grinder setting or a lower
setting for the amount of coffee to be ground.
. . . the machine door will not close.
^ Are the containers in position correctly?
. . . the steam system is switched off but steam is still
available.
If the steam system is still hot, steam will still be available.
However, if the steam system has cooled down after being
switched off, it will need to heat up again before steam is
available.
. . . coffee preparation has been interrupted.
If the water container empties whilst a drink is being
prepared, a message will appear in the display to ask if you
wish for the drink preparation to continue after the water
container has been refilled. If you do not respond to this
question with "OK" within 5 minutes, drink preparation will be
cancelled.
. . . only water is dispensed when coffee has been
selected.
– The lid of the ground coffee chute has been opened and
closed and then the "Have you added ground coffee and
do you want to make a drink now?" option has been
selected. However, the coffee chute has not been filled
with ground coffee.
After the drink has been dispensed, the coffee machine
will revert automatically to making coffee with coffee
beans.
– The beans may have become jammed. Pull the bean
container out of the machine and then push it back in
again.
. . . a message keeps appearing asking you to empty the
drip tray even though it is empty.
^ Have the contacts been properly cleaned and dried?
^ Is the drip tray positioned correctly in the machine?
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
^ Switch the machine off and then back on again with the
master switch.
^ Buff the contacts a little, e.g. with fine glasspaper or emery
cloth.
^ If this fault message continues to appear, please call the
Miele Service Department.
. . . the machine does not rinse through when switched
on, even though the Automatic rinsing programme is set
to "On".
If the temperature of the machine is still above 60 °C, rinsing
cannot take place.
. . . water stopped flowing whilst programming in the
amount to use.
Water flow stops automatically when the maximum fill quantity
is reached. The maximum quantity is stored in memory.
There is insufficient water in the water container. The quantity
used previously was not saved to memory.
. . . there is water in the waste container.
This is not a fault. The water is left over from the brewing and
cleaning process.
. . . there is a lot of residual "coffee water" in the waste
container.
If the slide control for the grinder is set to very fine, too much
residual "coffee water" can be left in the waste container.
^ If a very fine grinder setting has not been set, call the Miele
Service Department.
. . . the descaling process was started by mistake.
The descaling programme cannot be cancelled once "ok" has
been selected. The programme has to be completed through
to the end. This is a safety measure to ensure that the
machine is fully descaled, and is important for the long-term
protection of the machine and to ensure it functions correctly.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the coffee machine makes loud noises during the
descaling programme.
During the descaling programme you will hear loud noises as
water is flushed through the machine under high pressure.
These are no cause for concern.
. . . the heating-up time is getting longer, the amount of
water coming through is incorrect and the machine is not
performing properly.
The machine needs descaling.
. . . no water comes out of the spouts.
The filters in the brew unit are dirty.
^ Clean the filters by rubbing them with your finger.
. . . the brew unit or the waste container cannot be pulled
out of the machine.
The brew unit is not in the correct position. This can happen
if, for example, the machine door is opened during grinding
or brewing.
^ Close the door to the appliance. The brew unit will position
itself correctly automatically.
. . . the crema is not as it should be.
^ Check that the grinder setting is not too coarse or too fine.
^ Check the temperatures the different types of coffee have
been set to. If the temperature is too high, there will be dark
patches in the crema.
– The coffee is no longer fresh enough.
– The coffee blend is unsuitable.
– The coffee spouts have been set too high.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the fault message 10 or 17 appears.
Water has not been taken in.
^ The water container has not been correctly positioned
inside the machine. Remove the water container and push
it back in again, making sure it is positioned correctly.
^ This error message also appears if the water container was
not correctly filled for descaling. Fill the water container up
to the k mark.
^ After you have remedied the problem, switch the machine
off and then back on again after a short while. Select the
process you want again.
If this fault message still continues to appear in the display,
repeat the steps described above. If despite this, the fault
message still appears in the display, call the Miele Service
Department.
. . . the seal on the connection between the coffee outlet
and the brew unit is damaged and is leaking.
^ Replace it with the extra seal supplied.
^ Check the machine door. Over time the door can come out
of alignment and damage the seal. Align the door using the
hinges (see "Installation: Adjusting the door hinges").
. . . too much crema has formed and is overflowing above
the coffee spouts.
Some types of coffee will produce too much crema if the
coffee or espresso temperature is set to maximum and the
amount of coffee to be ground is set too high.
^ Set a lower temperature and reduce the amount of coffee
to be ground.
. . . the milk froth is "spitting".
Perhaps the system was not filled with water before the first
drink was made. Fill the system with water as described in
"Making coffee: Cappuccino and milk froth - Using for the first
time or after descaling".
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . milk spits out of the jug when making the first froth of
the day.
If the door was opened during the heating up phase,
pressure will have built up in the steam valve. When the valve
was opened, this pressure caused the milk to come out of the
spout too fast.
. . . the milk-frothing process starts, stops and starts
again.
This is not a fault. The process ensures a perfect froth.
. . . the slide control for the grinder setting will not move.
^ Close the machine door and dispense a cup of espresso
coffee.
The grinder setting slide control will now move.
. . . the brew unit cannot be removed.
The brew unit is not in the correct position.
^ Close the door and switch the appliance on.
The brew unit will position itself correctly.
. . . the fault message 73 or "Please check brew unit"
appears in the display.
The brew unit is possibly dirty and cannot be positioned
correctly.
^ Touch the "+ C" sensor.
^ Take the brew unit out of the machine and clean it
thoroughly (see "Cleaning and care - Brew unit").
^ Replace the brew unit in the machine and close the door.
If this fault message still continues to appear in the display,
please call the Miele Service department, quoting the fault
code.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the ground coffee chute cover cannot be pushed in
properly.
^ Is the lid of the ground coffee chute closed?
. . . it is not possible to make coffee/espresso using
ground coffee.
^ Before making coffee or espresso using ready ground
coffee, ensure that the main menu is showing in the
display.
. . . the message "too much ground coffee" comes up in
the display.
Enough ground coffee for one portion, i.e. a level scoop (of
the scoop supplied) of ground coffee, passes through the
ground coffee chute. If there is too much ground coffee, the
machine is unable to process it so that it can be emptied into
the waste container, and a fault message appears in the
display. After touching the sensor beside OK, the machine is
ready for use again.
. . . it is difficult to open or close the machine door and
the seal on the connection between the coffee outlet and
the brew unit has been pulled off.
^ Align the door using the hinges
(see "Installation: Adjusting the door hinges").
76
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of a fault which you cannot correct yourself,
please contact:
– your Miele Dealer
or
– the Miele Service Department (see back cover for
address).
When contacting your Dealer or the Service Department,
please quote the model and serial number of your machine.
These are shown on the data plate inside the machine.
Please note that telephone calls may be monitored and
recorded for training purposes.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection U.K., ZA, IRL
All electrical work should be carried out by a suitably
qualified and competent person only, in strict accordance
with current national and local safety regulations (BS 7671 in
the UK).
Installation, repairs and other work by unqualified persons
could be dangerous. The manufacturer cannot be held liable
for unauthorised work.
Ensure power is not supplied to the appliance until after
installation work has been carried out.
The voltage and connected load are given on the data plate.
Please ensure these match the household mains supply. The
fuse rating is quoted on the plug.
The appliance is supplied with a mains cable with moulded
plug for connection to a 230 - 240 V mains supply.
Connection should be made via a fused plug and suitable
switched socket which is easily accessible after installation.
Do not connect via an extension lead.
For extra safety it is advisable to install a residual current
device (RCD), with a trip current of 30 mA (in accordance
with DIN VDE 0664, VDE 0100, Section 739).
If the socket is not accessible after installation (depending on
country) an additional means of disconnection must be
provided for all poles.
WARNING: THIS APPLIANCE
MUST BE EARTHED
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection U.K., ZA, IRL
Non-rewireable plugs BS 1363
The fuse cover must be refitted when changing the fuse, and
if the fuse cover is lost, the plug must not be used until a
suitable replacement is obtained. The colour of the correct
replacement cover is that of the coloured insert in the base of
the plug, or the colour that is embossed in words on the base
of the plug (as applicable to the design of plug fitted).
Replacement fuses should be ASTA approved to BS 1362
and have the correct rating. Replacement fuses and fuse
covers may be purchased from your local electrical supplier.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Building-in and combination options
The coffee machine is designed to be built into a tall unit.
It can also be combined with other Miele built-in appliances.
If the coffee machine is to be built in above another
appliance, there must be a full-width, closed shelf between
them (except when it is combined with a Miele built-in plate
warming drawer).
The plate warmer can be connected directly to a socket at
the rear of the coffee machine using a special connection
cable (available as an optional accessory from your Miele
Dealer or the Miele Spare Parts Department) so that it can
be in use or ready for use whenever the coffee machine is
being used. Your cups will always be pre-warmed!
Only a Miele EGW 4000-14 or -29 plate warmer can be
connected directly to this coffee machine. Connection of
any other appliance would damage the machine.
The machine can also be installed in a mobile unit which is
available to purchase.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation
Before installation make sure that there is no power supply
to the machine. This also applies should it ever need to be
taken out of its housing unit.
The machine must be built in before it is operated.
Two allen keys (size 3 and 5) are required for installation.
^ Using the large allen key, unscrew all four feet out by about
2 mm.
^ Push the machine all the way into the niche until there is a
resistance. Then check the height to make sure it is sitting
centrally in the unit and that it is level.
If this is not the case, realign the 4 feet underneath the
machine using the large allen key.
The feet can be unscrewed by up to approx. 10 mm.
^ If the furniture unit walls are 19 mm thick you will need to
drill four holes in the sides for securing the machine. To
mark the position of these holes:
– Align the machine in the niche. Screw the side socket
screws inside the machine in a little so that they make
indents in the side walls and then unscrew them again.
– Take the machine out of the niche and drill ø 4.5 mm holes,
2 mm deep where you made the indentations.
^ Connect the machine to the electricity supply.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
^ Push it all the way into the niche until you feel resistance.
^ Open the machine door and partially tighten the side
socket screws.
^ Carefully turn the lower socket screws a to centre the
machine in the niche.
^ Tighten both upper socket screws b by hand to secure the
machine in the unit. Do not overtighten them.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Adjusting the door hinges
If the machine door becomes difficult to open or close after
installation you can adjust the hinges to realign it:
^ To adjust the door in direction a, turn screw a.
^ To adjust the door forwards or backwards, (direction b),
turn screw b.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 2407
M.-Nr. 07 120 790 / 00
CVA 4080
Download from Www.Somanuals.com. All Manuals Search And Download.
|