Operating and Installation
Instructions
Coffee System
CVA 4070
en - US, CA
To prevent accidents
and machine damage
read these instructions
before
installation or use.
M.-Nr. 07 194 170
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Descaling the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Adjusting the door hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances basic safety precautions should always be
followed, including the following:
Read all instructions before installation or use of the coffee system.
Be certain your appliance is
~
Please read these instructions
carefully to prevent accidents and
machine damage.
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damages caused
by the lack, or inadequacy, of an
effective grounding system.
This appliance complies with current
safety requirements. Improper use
of the appliance can cause personal
injury and material damage.
This appliance is for household use
only, to prepare espresso,
cappuccino and coffee.
Do not use this appliance other than
for its intended use. Any other use
could be dangerous.
Do not use an extension cord to
~
connect the appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance
(danger of overheating).
The manufacturer cannot be held
responsible for damage caused by
improper use of the appliance.
Before service or maintenance
~
disconnect the power supply by either
removing the fuse, "tripping" the circuit
breaker or unplugging the unit.
Electrical safety
Before connecting the appliance to
~
the electrical supply make sure that the
voltage and frequency listed on the
data plate correspond with the
Install or locate this appliance only
~
in accordance with the provided
installation instructions.
household electrical supply. If in doubt,
consult a qualified technician.
The appliance must be properly
~
installed before operation to ensure that
no electrical components are
accessible. Ensure that power is not
supplied to the appliance while
installation work, repairs or
maintenance is performed.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Installation work and repairs must
Use
~
only be performed by a trained
technician in accordance with national
and local safety regulations. Repairs
and other work by unauthorized
persons could be dangerous and may
void the warranty.
The coffee system must be
maintained daily to prevent the
growth of harmful bacteria and
mold. Please read the "Cleaning and
care" section of this booklet. All
parts are dishwasher safe except
the brew unit and bean container.
Only use Miele original spare parts.
~
Only then can the manufacturer
guarantee the safety of this machine.
Never open the outer casing of the
Caution! Do not look directly or with
an optical instrument into the
lighting - laser radiation.
~
appliance. Tampering with electrical
connections or components and
mechanical parts is dangerous and
may cause machine damage.
Caution! Risk of burns when
dispensing hot beverages, they are
extremely hot.
If the machine is installed in
~
combination with other appliances, a
protective base should be installed
between the appliance and the unit.
Persons which lack physical,
~
sensory or mental abilities or
Do not install or use outdoors even if
~
installed in the display cabinet.
experience with the machine should not
use it without supervision or instruction
by a responsible person.
To protect against fire, electric
~
shock and injury to persons do not
submerge the cord or plugs in water or
other liquids.
Close supervision is necessary
~
when any appliance is used by or near
children.
Do not let the cord hang over the
~
edge of a table or counter, or touch hot
Do not touch hot surfaces. Use
~
handles or knobs.
surfaces.
Rinse the lines and the froth
Do not operate any appliance with a
~
dispenser, and clean the unit before the
first use.
~
damaged cord or plug, or after the
appliance malfunctions or has been
damaged in any manner. Contact
Miele.
To avoid injuries allow the coffee
~
system to cool before cleaning or
putting on and taking off parts. Turn the
machine off at the main switch when
not in use and before cleaning.
Always attach the cord to the
~
appliance first, then plug it into the wall
outlet. To disconnect, turn the machine
off, then remove the plug from the wall
outlet.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Only fill the water tank with cold,
Do not use the machine when the
~
froth dispenser is removed. Danger of
~
fresh tap water. Warm or hot water, or
any other liquids may damage the
machine. The water should be changed
daily to prevent bacteria or mold
growth.
scalding with hot steam!
Never use a steam cleaner to clean
~
the appliance. Pressurized steam could
damage electrical components and
cause a short circuit.
Do not use mineral water. Mineral
~
water leads to heavy calcium buildup in
The appliance must be descaled
~
the machine that can damage the unit.
regularly with the supplied descaling
tablets. In areas with very hard water
the machine may need to be descaled
more often. The manufacturer cannot
be held responsible for damages
resulting from insufficient descaling.
Do not put anything but coffee
~
beans into the beans container. Do not
put ground coffee in the beans
container, it will damage the grinding
unit.
Do not fill anything but ground
Only use the descaling tablets
~ ~
coffee or a cleaning tablet (for the brew provided by Miele. Take care to use the
unit) in the funnel for ground coffee,
otherwise it will get damaged.
correct mixture of water and descaler,
otherwise it may cause damage.
Sugar can damage the appliance!
Depending on the fat content of the
~
~
Caramelized or otherwise pre-treated
coffee beans or other sugar containing
beverages must not be put in the
machine.
coffee, the brew unit may clog. Clean
the brew unit every 200 cups with a
cleaning tablet. The display shows a
respective request.
Never place a cup with an
Dispose of the coffee waste in a
~
trash can, not in the sink. The sink
~
alcohol-coffee mixture underneath the
coffee dispenser. Plastic parts of the
unit could catch fire!
could get clogged.
Do not hang, lean, sit or place heavy
~
items on the door. The machine could
The hot water and steam dispensed
~
could cause scalding. These functions
must be used carefully. Never hold any
parts of the body under the steam
nozzle or the hot water dispenser. The
machine must never be used to clean
objects.
be damaged.
The use of accessory attachments
~
not recommended by the appliance
manufacturer may result in fire, electric
shock or injury to persons.
SAVE THESE
INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the machine
Front view
a Touch controls
(lowest control "On/Off" button)
g Bottom lighting
h Plastic drip tray
b Display
i Metal drip tray
c Touch controls
(lowest control "Clear" button)
j Coffee dispenser
(height adjustable)
d Top lighting
e Door grip
k Froth dispenser
(removable for better cleaning)
f Hot water spout
l Intake hose
(removable together with dispenser)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the machine
Interior view
a Main switch
b Cover for ground coffee funnel
c Funnel for ground coffee
d Grind control lever
e Coffee bean container
f Drip tray with no-spill grid for transport
g Water tank
h Brew unit
i Waste unit
8
Download from Www.Somanuals.com. All Manuals Search And Download.
First steps to use
Touch controls
Turning on
Select a touch control with your
fingertip to use the machine.
^ Select "On/Off" to turn the coffee
system on.
The display shows the clock. See
"Settings - Clock - Setting the time of
day" to set the time.
Display
To select a menu, select the touch
control next to the respective menu
point.
During the very first use, you will be
prompted to select a language.
If more features can be selected under
one menu point, the menu has three
dots (e.g. "Settings...").
^ Select the desired language touch
control and then "OK".
The J symbol indicates the "Language"
setting. If you accidentally select an
unfamiliar language, simply look for the
J symbol. Touch the control next to the
flag symbol and select your language
of choice.
"more" / "back": If there are more
menus which are not immediately
shown, select "more" or "back" to see
further options.
"Clear": to go back to the previous
screen.
^ Customize the coffee system to your
desired settings.
"Stop": to cancel coffee preparation.
"OK": to save a setting.
Prepare two cups of coffee and
dispose of them, this will clean any
coffee residues from the brew unit
left from the quality control tests at
the factory.
Before the first use
The appliance must be correctly
installed and connected before the
first use.
Turning off
^ Select "On/Off".
Clean the appliance and remove
protective foils before the first use.
The display shows the time of day. After
60 seconds the display turns off
(depending on the setting). See
"Settings - Clock".
If the rinse automatic feature is
turned on the machine will begin
rinsing if a coffee was prepared that
day.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling water, beans or ground coffee
Before using the coffee system for
the first time, clean the appliance.
See "Cleaning and Care".
Filling the water tank
The beans and the water quality is
important for a good espresso or
^ Open the appliance door by
coffee. The water tank must be washed
and filled with fresh cold drinking water
before each day of use. The unit
grasping the recess next to the hot
water spout and pulling the door
towards you.
displays a reminder when turned on.
Never add hot water or any other
liquids except cold water to the
water tank.
Do not use mineral water. Mineral
water leads to heavy calcium
built-up in the machine that can
damage the unit.
^ Pull the water tank out.
^ Fill the container with fresh, cold tap
water to the "Max." mark.
A valve at the front of the tank prevents
leaks.
^ Close the lid and push the water tank
into the unit until it clicks into place.
The water tank must be positioned
correctly or the valve will leak. If the
water tank has not clicked into
place, pull the tank out, check and
clean the niche.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling water, beans or ground coffee
Filling the beans container
Filling ground coffee
A funnel for ground coffee is provided
in case you would like to prepare a
different coffee type, e.g. decaffeinated
coffee.
Only fill espresso or coffee beans in
the beans container. Anything else -
including ground coffee - will
damage the grinding unit.
Caramelized or otherwise
pre-treated beans or sugar
containing beverages must not be
filled into the appliance. It will
damage the coffee system.
^ Pull the bean container out.
^ Pull the cover for the ground coffee
funnel out of the appliance and lift the
funnel lid, a.
^ Place one spoonful of ground coffee
into the funnel, b, (using the
supplied spoon) and close the lid.
^ Push the cover into the appliance
and close the door.
^ Push the lid back and fill the
See "Making Coffee - Espresso and
coffee made from ground coffee".
container with roasted coffee beans.
^ Push the lid back into place and put
the beans container back into the
appliance.
^ Close the door.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Turning on
The lines must be rinsed daily
^ Select the "On/Off" touch control.
before the first use. This will happen
automatically if "Rinse automatic" is
set to "On" (see "Settings - Rinse
Automatic") and the machine is cold.
After heating, hot water runs out of
the two spouts into the drip tray. If
"Rinse automatic" was set to "Off",
use "Care" to rinse the lines. See
"Cleaning and Care - Rinse".
A reminder to fill the water tank with
fresh water is displayed.
Please fill and reinsert
i
the water tank
Then the upper line in the display
shows:
Preheating
+ DESCALING
+ USER PROFILE: STANDARD
+ SETTINGS F ...
If "Rinse automatic" is set to "On"
(default), the machine rinses after the
heating phase and the main menu is
displayed.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Prewarming cups
Adjust the dispenser height
All beverages should be made in a
warm cup, to develop the aroma. The
smaller the amount of coffee or
espresso and the thicker the cups, the
more important it is to prewarm the
cups.
Depending on the cup height, the
coffee dispensers can be adjusted so
that the coffee and espresso have a
shorter distance to the cup, do not cool
and have a better crema.
^ Set the cup under the hot water
spout.
+ ESPRESSO
+ COFFEE
HOT WATER ~
MILK FROTH ~
more ~
+ CAPPUCCINO
^ Select "Hot water" from the main
^ Pull the coffee dispenser slowly up or
menu.
down.
^ Hot water is dispensed. Select "Stop"
to stop the flow.
^ Let the hot water sit for a moment to
prewarm the cup, then empty the
cup.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Espresso and coffee made
from coffee beans
Preparing two cups at the same time
^ Set a cup under each coffee
dispenser.
^ Set a cup under the coffee
dispenser.
^ Select "Espresso" or "Coffee".
^ Select "2 portions" when displayed.
The drink is dispensed through both
dispensers at the same time.
The coffee system makes two portions
of espresso or coffee with a few
seconds in between.
^ Select "Espresso" or "Coffee".
The machine grinds the beans and
pre-brews the coffee (if "On" is selected
under "Pre-brewing"). The selected
beverage is dispensed.
Keep the cups under the dispenser
until the main menu shows in the
display.
Do not open the door during
brewing. The machine will be
damaged.
Canceling
^ Select "Stop" to cancel the process.
The portion sizes for espresso, coffee
and cappuccino can be set
individually. See "Setting the serving
sizes".
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Espresso and coffee made
from ground coffee
Preparing two cups at the same time
When using ground coffee, only one
portion at a time can be prepared. The
unit uses the whole portion of ground
coffee which was filled in the funnel to
prepare one drink.
After filling the funnel with ground
coffee (see "Filling water, beans or
ground coffee - Filling ground coffee"),
the display shows:
Did you fill ground coffee and
i
No
do you want to prepare it?
+
Yes ~
^ Select "Yes".
Select "No" if no ground coffee is filled
in the funnel. Otherwise the coffee
system assumes that ground coffee is
in the machine and dispenses only
water next time coffee is made.
^ Set a cup under the coffee
dispenser.
The drink is dispensed through both
dispensers at the same time.
^ Select "Espresso" or "Coffee".
The coffee system brews the espresso
or coffee and the drink is dispensed.
Do not open the door during the
brewing process. It will damage the
machine. The unit will switch
automatically back to brewing with
beans after preparation.
Canceling
^ Select "Stop" to cancel the process.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Cappuccino and milk froth
When using for the first time or using
after descaling
The lines were completely drained
before the unit left the factory. They will
also be drained when the machine is
descaled. Before preparing
cappuccino or froth, the lines must be
filled with water.
^ Set a cup under the cappuccino
dispenser.
^ Select "Milk froth".
The intake hose takes in water from the
tank and fills the lines with water. A
small amount of water runs from the
froth dispenser.
Prompts to clean the froth dispenser
appear in the display.
^ Confirm by selecting "OK".
^ Once the machine stops, select "Milk
froth" again.
The froth dispenser dispenses steam
and the lines are filled with water.
^ Select "Clear" to get back to the main
menu.
The coffee system is ready to use.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Making coffee
Cappuccino
Milk froth
To prepare a cappuccino you need a
large ceramic or porcelain cup and a
small mug (supplied) of milk.
If you need additional milk froth,
prepare cold skim milk in a stainless
steel mug which narrows towards the
top.
The best milk froth is achieved with
cold milk.
^ Set the supplied glass mug with milk
under the intake hose and the
stainless steel mug under the froth
dispenser.
Only one cup of cappuccino can be
prepared at a time because of the
milk frothing process.
^ Select "Milk froth".
The milk is frothed into the stainless
steel mug.
^ Select "Stop" to cancel the milk
frothing.
After preparing milk froth and
cappuccino
Clean the froth dispenser and intake
hose immediately after use. If the milk is
allowed to dry, the parts may get
clogged and difficult to clean. See
"Cleaning and Care".
^ Set the mug of milk under the intake
hose and the cup under the froth
dispenser.
^ Select "Cappuccino".
The milk is frothed into the cup. At the
same time the beans are ground.
Select "Stop" to cancel the milk frothing.
^ Once the milk is frothed, set the
cappuccino cup under both
dispensers and select "OK".
The cappuccino will be prepared.
^ Select "Stop" when enough espresso
has been prepared.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the coffee grinder
The finer the coffee beans are ground
determines the strength of the coffee
and the quality of the crema.
To adjust the grinder setting
To prevent machine damage adjust
the coffee grinder one notch at a
time and let the beans grind before
adjusting another notch. Otherwise
the machine will be damaged.
^ Push the slide control to the left for a
finer grind or to the right for a coarser
grind.
The grinder should be adjusted:
You should be able to feel the notches
when moving the slide control.
– If the espresso flows too quickly into
the cup, the pressure cannot be built
up because the beans have been
ground too coarsely. The grinder
should be adjusted to a finer setting.
If the slide control will not move:
^ Close the machine and dispense a
cup of coffee.
– If the espresso only trickles into the
cup, the beans have been ground
too fine and the coffee will be bitter.
The grinder should be adjusted to a
coarser setting.
Then try to move the slide control
again.
– If the crema is evenly colored but
pale, the ground coffee is too
coarse.
– If the crema is very dark brown on
one side, graduating almost to white
on the other, the ground coffee is too
fine.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
The coffee system can be customized
to suit individual preferences.
Language
To show the displays in the desired
language, select the language before
the first use.
Preheating
+ DESCALING
+ USER PROFILES: STANDARD
+ SETTINGS F ...
^ Select "Settings" from the main menu
during the pre-heating phase or,
+ back
SETTINGS F ... ~
+ CARE ...
+ USER PROFILES
^ in the main menu.
SETTINGS
+ LANGUAGE F ...
+ CLOCK
GRIND AMOUNT ... ~
PRE-BREWING ~
more ~
+ TIMER ...
^ Select "Language".
LANGUAGE english
+ english
+ deutsch
+ español
français ~
more ~
OK ~
^ Select the desired language.
To see more language options, select
"more".
The language options are:
English, German, Español, Français,
Italiano, Polski and Portugués.
^ Select "OK" to save the selection.
All displays are shown in the selected
language.
^ To go back to the main menu, select
"Clear".
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Clock
Clock display size
The size of the clock display can be
adjusted. The options are "normal" or
"large".
+ back
SETTINGS F ... ~
+ CARE ...
+ USER PROFILES
^ Select "Size".
^ Select "Settings".
The selected size is highlighted in the
display.
SETTINGS
+ LANGUAGE F ...
+ CLOCK
GRIND AMOUNT ... ~
PRE-BREWING ~
more ~
^ Select "Size" until the desired size is
highlighted.
+ TIMER ...
^ Select "OK" to save the selection.
^ Select "Clock".
12 or 24 hour clock
Setting the time of day
The clock display can be set to the 12
or 24 hour clock.
^ Select "Enter Time".
^ Select the respective touch control.
The selected display is highlighted.
^ Select "OK" to save the selection.
^ Select "+" or "-" with the right touch
controls to select the hours.
^ Set the minutes by selecting
"Minutes".
^ Select "+" or "-" with the right touch
Clock display on/off
controls to select the minutes.
The clock can be displayed or turned
off.
^ Select "OK".
The time of day is saved.
If the display is turned on, the time of
day is displayed when the machine is
turned off.
If the option is set to off, the display
turns off after 60 seconds.
^ Select "Clock display".
The selected display is highlighted.
^ Select "OK" to save the selection.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Timer
Turn on at
A specific time of day can be set to turn
the machine on, e.g. for breakfast.
Setting a timer
^ Select "Turning on at".
+ back
SETTINGS F ... ~
^ Set the hours to when the appliance
+ CARE ...
should turn on by selecting "+" or "–".
+ USER PROFILES
^ Select "Settings".
^ Switch to "Minutes" and repeat.
^ Select "OK".
SETTINGS
+ LANGUAGE F ...
+ CLOCK
GRIND AMOUNT ... ~
PRE-BREWING ~
more ~
The machine will turn on every day at
the selected time.
+ TIMER ...
If the "Rinse" function was set to
"On", the lines will be rinsed when
the machine is turned on.
^ Select "Timer".
^ Select "Setting".
If the machine is turned on
automatically three times and no
beverages were dispensed, the
machine will no longer turn on
automatically. The programmed
times stay saved and will be
activated again when the machine is
manually turned on the next time.
This safety measure is designed so
that the machine does not turn on
every day if the setting was not
canceled before a longer time of
absence, e.g. vacationing.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Turn off after
Turn off at
The machine will turn off automatically
to save energy after a programmed
period of time. Time periods between
15 minutes and 6 hours can be
A specific time of day can be set to turn
the coffee system off.
^ Select "Turning off at".
selected. If the machine is not used
after dispensing beverages, it will turn
off after the selected time.
^ Set the hour when the appliance
should turn on by selecting "+" or "–".
^ Switch to "Minutes" and repeat.
^ Select "Turning off after".
^ Select "OK" to save the selection.
For example a 0:15 display means that
the unit will turn off after 15 minutes of
no use.
The machine will turn off at the selected
time.
^ Select "Clear" until the display shows
^ Set the hour when the appliance
the desired menu.
should turn off by selecting "+" or "–".
If rinsing is set to "On" and a
beverage was already dispensed, the
lines will be automatically rinsed
before turning off.
^ Switch to "Minutes" and repeat.
^ Select "OK" to save the selection.
The machine will turn off after the
desired time.
If rinsing is set to "On" and a
beverage was already dispensed, the
lines will be automatically rinsed
before turning off.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Activating a timer
The timer function "Turning on at" or
"Turning off at" can be activated or
deactivated.
+ back
SETTINGS ~
^ Select "Activate".
+ CARE ...
+ USER PROFILES
^ Select "On" to activate the desired
^ Select "Settings".
function.
SETTINGS
Select "Off" to deactivate the desired
function. The selected times in the
function will stay stored in the
memory.
+ LANGUAGE F ...
+ CLOCK
GRIND AMOUNT ... ~
PRE-BREWING ~
more ~
+ TIMER ...
^ Select "Timer".
^ Select "OK" to confirm the setting.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Grind amount
Pre-brewing
The grind amount can be set,
During pre-brewing a small amount of
depending on the coffee type, between water is released onto the ground
0.2 ounces and 0.5 ounces
coffee. After a short time the remaining
water is pushed through the ground
coffee at a high pressure.
(6 - 14 grams). The more the coffee is
ground the stronger the espresso,
coffee or cappuccino will be.
If the function is turned off, the hot
water will be immediately pushed at a
high pressure through the ground
coffee.
The crema is also influenced by the
grind amount.
– If the crema has an even but
white/yellow coloring, the ground
amount might be too little.
Pre-brewing is set to off by default.
^ Select the User profile, for which you
– If the crema is dark brown to black in
color on the one side and almost
white on the other side, the grind
amount might be too much.
would like to set the pre-brewing.
+ back
SETTINGS J... ~
+ CARE ...
^ Select the User profile, for which you
+ USER PROFILES
would like to set the grind amount.
^ Select "Settings".
^ Select "Settings".
SETTINGS
SETTINGS
+ LANGUAGE F ...
+ CLOCK
GRIND AMOUNT ... ~
PRE-BREWING ~
more ~
+ LANGUAGE F ...
+ CLOCK
GRIND AMOUNT ... ~
PRE-BREWING ~
more ~
+ TIMER ...
+ TIMER ...
^ Select "Pre-brewing".
^ Select "Grind amount".
PRE-BREWING
The grind amount can be set to
individual preferences for espresso,
coffee and cappuccino.
+ Long
Normal
+ Normal
+ Without
OK ~
^ Select the desired beverage.
The second line shows the currently
selected pre-brewing option.
^ Select the center left or right touch
control to set the grind amount to
more or less.
^ Set the desired option and select
"OK" to save the setting.
^ Select "OK" to save the setting in the
User profile.
^ Select "Clear" until the display shows
the desired menu.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Temperature
Rinse automatic
Five temperatures are available for
each beverage, three for hot water.
Maximum is the highest temperature,
minimum the lowest.
It is important to flush out any residual
coffee from the lines when starting to
use the machine for the day. If "Rinse
Automatic" is set to "on", the rinsing
starts automatically once the machine
is turned on and still cold. The lines are
rinsed with hot water and in return
prewarmed. A message shows in the
display.
Not every coffee type allows high
temperatures. Some types react so
sensitively that the crema cannot be
properly built.
^ Select the User profile, for which you
The machine will also run an automatic
rinse, before it switches off, if it has
been used to prepare a drink.
would like to set the temperature.
^ Select "Settings" and then "more".
The rinse automatic is set to on by
default.
SETTINGS
+ back
STEAM SYSTEM ~
LIGHTING ... ~
more ~
+ TEMPERATURE
+ RINSE AUTOMATIC
To turn rinse automatic off/on
^ Select "Settings" and then "more".
^ Select "Temperature".
SETTINGS
The temperature can be set individually
for espresso, coffee, cappuccino and
hot water.
+ back
STEAM SYSTEM ~
LIGHTING ... ~
more ~
+ TEMPERATURE
+ RINSE AUTOMATIC
^ Select the desired beverage.
^ Select "Rinse automatic".
^ Each beverage shows the currently
selected temperature.
RINSE AUTOMATIC
On
^ Select the respective touch control
until the desired temperature is
highlighted.
+ Off
+ On
OK ~
^ Select "OK".
The second line shows if the rinse
automatic is turned on or off.
^ Select "On" or "Off" and then "OK" to
save the setting.
It is recommended to set this option to
"On" so that the rinse process cannot
be forgotten.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Steam system
Lighting
The appliance has two heating
Lighting sets the type of light used
when the appliance is turned on. The
lighting can be turned on/off
systems. They allow for independent
preparation of froth/cappuccino or
espresso/coffee. The second heating
system can be turned off to save
energy during the heating phase e.g. if
froth is not prepared very often.
automatically or dimmed to the desired
brightness. The dimming functions can
be set independently for the upper or
lower lighting.
When the steam system is turned off
and froth or cappuccino is selected,
the unit must heat up first to produce
steam.
,Caution! Do not look directly or
with an optical instrument into the
lighting. Laser!
As long as the coffee system was
not completely turned off, the steam
system is on.
To change the lighting
^ Select "Settings" and then "more".
^ Select "Lighting".
The steam system is turned on by
default.
^ Select "On during use" or "Dimming".
On during use
To turn the steam system off
^ Select "Settings".
On: The lighting turns on and off when
the unit is turned on and off.
^ Select "Steam system".
Off: The lighting stays turned off.
The second line shows if the steam
system is turned on or off.
Dimming
^ Select "On" or "Off" and then "OK" to
The brightness of the upper and lower
lighting can be set independently of
each other.
save the setting.
^ Select "Top" or "Bottom".
^ Set the brightness by selecting the
center touch control to the left or
right.
^ Select "OK" to save the selection.
^ Select "Clear" to get back to
"Settings".
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Total no. coffees
System Lock
^ Select "Total no. coffees" to check the The coffee system can be locked so
number of previously dispensed
espresso, coffee and cappuccino.
that it cannot be used by children or
those not familiar with the operating
instructions.
After a few seconds the display
switches back to the "Settings" menu or To activate the System Lock, it must be
touch "OK".
set in the settings.
^ Select "Settings" and then select
"more" twice.
^ Select "System Lock".
The second line shows if the System
Lock is currently activated or not.
^ Select "On" and confirm with "OK".
If "Off" is selected, the unit cannot be
locked (safety measure).
^ Turn the appliance off with the
"On/Off" touch control.
^ Select the touch control next to W.
SYSTEM LOCK
Off
+ Off
+ On
OK ~
^ Select "On" and then "OK".
The appliance is now locked and will
not operate. The display shows a
locked padlock X.
Unlocking the coffee system
^ Select the X symbol.
^ Select "Off" and then "OK".
The appliance is now unlocked and
ready for use.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Water hardness
To set the correct water hardness:
The hardness of the water used in the
coffee system must be determined and
programmed into the appliance. The
water hardness will determine how
frequently the unit must be descaled to
maintain the coffee system properly.
The machine monitors the volume of
water passing through it in conjunction
with the hardness of the water and will
indicate when descaling is necessary.
Your local water authority can tell you
the hardness of your tap water or you
can measure it yourself using the
enclosed test strip.
+ back
SETTINGS J... ~
+ CARE ...
+ USER PROFILES
^ Select "Settings" and then "more"
twice.
^ Select "Water hardness".
^ Select the center touch control to set
the water hardness harder (right) or
softer (left).
^ Select "OK" to save the selection.
^ Dip the test strip in the water for
1 second and shake off any
remaining water. The result is visible
in about 1 minute.
If the water hardness is greater than
40 gr/gal, the water must be
descaled more often than displayed.
Calcium will build up faster than at a
lower water hardness and may
damage the machine.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
User profiles
Creating a user profile
Up to 10 different user profiles can be
entered to accommodate different
tastes i.e. different grind amounts,
temperature, pre-brewing, portion
sizes.
^ Select "Settings" and then "more"
twice.
^ Select "User profiles".
The upper display line shows which
user profile is currently set, if different
profiles were already created.
The "Standard" profile has standard
settings.
^ Select "Creating".
^ Select the center left or right touch
control to select a letter.
^ Touch "Select".
^ Repeat the step until the desired
name is spelled out.
To delete a letter:
^ Select "Backspace". The last letter
will be deleted.
To save a name:
^ Select "OK". The display shows the
typed name.
The display shows more selections:
"Change name", "Delete", "Change"
Not saving a name:
^ Select the "Clear" touch control.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Change name
Change
^ If you would like to change a name,
touch "Change name" and then the
touch control next to the name to be
changed.
The appliance can be set so that it
changes back automatically to the
standard profile or that the once set
user profile is maintained.
^ Type in the name as described in
"Creating a user profile" and select
"OK".
^ Select "Change".
^ Select from:
Never: The unit keeps the once
selected user profile until another user
profile is selected.
^ Select "Clear" to go back to the
previous screen.
At turning on: Every time the coffee
maker is turned on, it selects
automatically the standard user profile,
regardless which user profile was last
selected.
Delete
To delete the user profile completely
^ Select "Delete".
^ Select the touch control next to the
name to be deleted.
After servings: After each dispensing
of a drink the unit switches
automatically back to the standard
profile.
^ Select "Yes" if you are sure you would
like to delete the selected name.
The selected name will be deleted from
the list.
Selecting a user profile
^ Select "User profile - Standard" and
then the desired profile.
^ Select "OK".
The "Standard" profile has standard
setti
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Display
Tone options
The display contrast and brightness
can be adjusted.
A tone can be selected to confirm the
selection of a touch control.
^ Select "Settings" and then select
^ Select "Settings" and then "more"
"more" three times.
three times.
SETTINGS
SETTINGS
+ back
PLUMBED ... ~
RESET ~
+ back
PLUMBED ... ~
+ DISPLAY
+ TONE OPTIONS
+ DISPLAY
+ TONE OPTIONS
RESET ~
^ Select "Display".
^ Select "Tone options".
^ Select "Brightness" or "Contrast" and
then the setting. The higher the
number the higher the contrast or
brightness.
To turn the tone on or off
^ Select "Keypad tone" until the desired
option is highlighted.
^ Select "OK" to save the selection.
If the keypad tones are turned on, the
volume can be adjusted. The higher the
number the louder the tone.
^ Confirm the selection with "OK".
Volume
^ Select "Volume" until the desired
volume of the keypad tone is
highlighted.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Reset
To select the factory defaults select in
the submenu to "Reset all" (all settings
back to default: timer, rinse automatic,
steam system, lighting, System Lock,
water hardness, display, last selected
coffee type and all standard profile
settings), or the "User profiles".
If you select one of these options
^ Select "Yes" to reset to the default
settings or "No" to keep the selected
settings.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the serving sizes
The flavor of the coffee depends on the Cappuccino is a combination of milk
coffee and quantity of water used. To
ensure the machine uses exactly the
amount of water to suit your taste and
your cups, there is a choice of two
serving sizes for espresso/coffee. The
fill height can be programmed.
froth and espresso. When preparing
milk froth the froth-time can be
individually set. The amount of
espresso can be set to approx.
30 - 125 ml.
^ Set the desired cup size under the
Espresso serving size
froth dispenser first.
approx. 30 - 125 ml.
^ To set the amount of froth, press and
hold "Cappuccino" until the display
shows "Serving setting".
Coffee serving size
approx. 30 - 250 ml.
Hot water serving size
^ Select "OK" once steam and froth are
dispensed to your desire. The froth
time has been set.
approx. 30 - 250 ml.
^ Set the desired cup size under the
coffee dispenser.
^ You will then be prompted to move
the coffee cup from under the froth
dispenser to the coffee dispenser.
^ Select the drink you would like to
program. Press and hold the touch
control until "Serving setting" is
displayed under the drink type.
^ Press and hold "OK" until the display
shows "Serving setting".
^ Release the touch control.
^ Release the touch control.
^ Select "OK" once the cup is filled to
^ Select "OK" once the cup is filled to
your desire.
your desire.
The programmed amount will be dispensed every time the drink is made.
The water flow stops automatically when it reaches the maximum amount
possible. The maximum filling quantity will then be saved for the drink.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Allow the coffee system to cool
before cleaning. Danger of burns!
+ back
SETTINGS J... ~
+ CARE ...
Do not clean the unit with a steam
cleaner. Never use cleaners
containing chlorides, sand, soda or
scouring agents. These will damage
the surface.
+ USER PROFILES
^ In the main menu touch "more" until
"Care" shows. Select "Care".
^ Select "System rinse".
^ Select "OK".
To avoid mold of coffee waste, clean
the unit regularly.
Hot water will flow through and clean
the brew unit, hot water and coffee
dispensers.
All parts can be cleaned in the
dishwasher, except the brew unit and
the bean container. When the parts are
cleaned in the dishwasher they might
get discolored by food residues such
as tomatoes.
^ When finished select "OK", then
"Clear" to go back to the main menu.
Rinse
If you do not wish to rinse the lines
automatically, they have to be flushed
manually. Rinse them twice daily, once
before using the machine and before
turning it off for the day.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Water tank
Waste unit
Empty the water tank daily and refill
before preparing the first drink with
fresh, cold tap water.
The display shows a message to empty
the waste unit. Clean the waste unit
daily. Coffee waste can mold if there is
water in the waste unit from the rinse
process.
Check if the valve is clean. If the
valve has residues on it, the water
tank will not connect properly and
might leak.
Line the waste unit with a paper towel
to make for easier cleaning.
^ Pull the waste unit out.
^ Wash the waste container in the
dishwasher or by hand with hot water
and liquid dish soap and dry with a
soft cloth.
^ Clean the niche of the waste unit in
the machine.
^ Push the waste unit completely into
the machine.
^ Clean the niche of the water tank.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Drip tray
^ Wash the drip tray in the dishwasher
or by hand with hot water and liquid
dish soap, then dry with a soft cloth.
The trip tray contains a sensor which
causes the display to show when the
tray is full and needs to be emptied.
Clean the drip tray daily.
Take care that the metal contacts at
the back of the drip tray are clean
and dry. If the contacts are soiled or
wet the unit cannot detect when the
drip tray is full and needs to be
emptied.
Remove the drip tray after the final
rinse when no more water runs from
the lines.
^ Open the door and pull the drip tray
out.
The drip tray contains a grid to avoid
spilling during transport.
^ Push the drip tray with grid along the
right edge all way in the machine.
^ Close the door.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Drip catch with metal insert
Bean container
The bean container must be cleaned
by hand with hot water and liquid
dish soap.
^ Pull the bean container out and push
the lid back.
^ Wash the bean container by hand
with hot water and liquid dish soap,
then dry with a soft cloth.
^ Take out and clean the drip catch
^ Push the lid back and reinsert the
and metal plate.
bean container into the machine.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Coffee dispenser connector
Interior and door
^ Once all movable parts are removed
clean the interior with a solution of hot
water and liquid dish soap.
Dry ground coffee can be vacuumed.
A connector between the brew unit and
coffee dispenser is located on the inner
door.
^ Gently clean the connector regularly
with a damp cloth without removing
the lubricant for the gasket.
^ The lower part of the inner door has a
drip tray. Clean the drip tray.
^ Lubricate the gasket once a month
with the supplied silicone grease.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Brew unit
Manually clean the brew unit weekly.
The movable parts are lubricated
and the gaskets will get damaged in
the dishwasher.
^ Take out the water tank, waste unit
and the cover for the ground coffee
funnel.
^ Rub off any coffee residue from the
filters with a sponge. One filter is in
the funnel, a, the second is to the
left of the funnel, b.
^ Dry the funnel, a, to prevent ground
coffee from sticking.
^ Clean the interior and remove coffee
residues.
Dry coffee grounds can be vacuumed.
^ Press the light colored button on the
brew unit handle, a, and turn the
handle to the left, b.
^ Push the brew unit in the track
straight into the appliance.
^ Press the brew unit catch, c,
downwards and pull the brew unit
out.
The brew unit is not in the correct
position if it is hard to pull out. See
"Frequently asked questions".
^ Clean the brew unit under running
warm water. Do not use soap.
^ Press the light colored button on the
brew unit handle, a, and turn the
handle to the right, b.
Leave the handle in position or the
brew unit cannot be inserted
properly.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning/Degreasing the brew unit
^ Set a 1 quart container under the
coffee dispenser.
Depending on the oil content of the
coffee, the brew unit can clog. Clean
the brew unit approx. every 200 cups
with the enclosed detergent tablets.
They are specially developed for the
coffee maker to optimize the
The interior is also rinsed, therefore the
drip tray must be emptied.
When the display shows:
Please drop the cleaning tablet in the
funnel for ground coffee
degreasing. The cleaning tablets can
be purchased from Miele.
^ Take out the funnel cover and open
the funnel lid.
As a reminder the display shows
"Cleaning must be started" after
200 cups and then until the machine
is cleaned. The cleaning process
takes about 6 minutes.
^ Select "Care".
^ Select "Cleaning" and then "OK".
^ Insert the cleaning tablet in the
The display guides you through the
cleaning process. Please follow the
single steps.
funnel.
^ Close the lid, reinsert the cover and
close the door.
^ Select "OK".
Follow the display messages.
When the display shows:
Process finished. Please confirm.
The brew unit is cleaned and rinsed.
^ Select "OK" and then "Clear" to go
back to the main menu.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Froth dispenser/Intake hose
Clean the froth dispenser after each
use, otherwise it may become blocked
with dried milk and hard to clean.
Rinsing does not replace cleaning in
the dishwasher.
^ Select "Care".
^ Select "System rinse".
^ Pull all pieces apart. Remove the
piece with the gaskets by turning and
pulling it apart.
^ Set a glass with water under the
intake hose and select "OK".
^ Insert the pieces in the dishwasher
and then lubricate the gaskets with
the supplied silicone grease.
The intake hose takes in the water and
rinses it.
Cleaning in the dishwasher
Take care that the small holes of the
single pieces are not clogged (see
arrow).
To clean the froth dispenser in the
dishwasher, take the parts from the
machine. Regular cleaning in the
dishwasher is important, so that the
froth dispenser does not clog over time,
when milk is not removed during
rinsing.
Pinch the soft parts to loosen the
soiling, then blow them out.
Do not use a needle to remove
residues, the parts may get
damaged.
^ Turn the cover above the spout to the
left, a.
^ Pull the froth dispenser out of the
machine, b, holding it by the spout
and the intake hose.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
^ Reassemble the parts as shown.
Take care that the raised parts (see
arrow) point downwards and,
^ Push the froth dispenser into the
machine from below, a, and turn the
cover above the spout to the right,
b.
Do not use the machine without the
froth dispenser installed.
Steam will spit uncontrollably.
Danger of scalding and machine
damage.
^ that the marks are lined up.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Exterior
Stainless steel surfaces
Stainless steel surfaces can be cleaned
The front of the appliance can be
cleaned with a sponge and a solution of using a non-abrasive stainless steel
warm water and non abrasive liquid
dish soap. Dry with a soft cloth.
cleaner (available from Miele).
To help prevent soiling, a conditioner
for stainless steel can also be used.
Apply sparingly and with even
pressure.
Only use a slightly damp sponge
when cleaning the controls. Water
could penetrate into the electronics
and cause damage.
Stainless steel colored controls
Clean the buttons and knobs with a
sponge and a solution of warm
water and liquid dish soap. These
controls may become discolored or
damaged if not cleaned regularly.
Do not use a stainless steel cleaner
on the knobs or buttons. Clean
immediately after use.
Abrasive cleaning agents, glass
cleaning agents, all-purpose
cleaners, thinner or ammonium
cleaners should not be used on the
machine. They will damage the
surface.
Wipe any spills from descaling
immediately!
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Descaling the appliance
The coffee system must be descaled
regularly. The appliance will display a
reminder message to descale and will
eventually lock if not descaled.
Descaling
^ To descale the unit before it is heated
up, select "Descaling" in the main
menu.
The display will show "Please descale
the coffee system. Remaining number
of servings: 50". This message will now
appear after each preparation. If the
counter has elapsed to 0, the appliance
will be locked.
^ To start the descaling process before
prompted by the machine (e.g.
because of very hard water), select
"Care".
^ Select "Descaling" and then "OK".
The display prompts the user through
the single steps of the descaling
process. Follow the prompts.
Select "Descaling" to start the descaling
immediately. The descaling takes about
20 minutes. If you want to continue at a
later point in time, turn the unit off. The
appliance can only be used again once
descaling is performed.
If the descaling is started while the
machine is still hot, the appliance
will cool down for 10 minutes before
the descaling begins.
Only use the enclosed descaling
tablets for descaling. They are
specially developed for the coffee
system to optimize the descaling.
The descaling tablets can be
purchased from Miele.
The descaling process cannot be
canceled once "OK" is selected. The
process now needs to be
completed. This is a safety feature to
ensure the process will be
completed. It is important for best
results and the longevity of the
machine.
Other agents may damage the
machine and affect the taste of
coffee and hot water.
The machine could also be
damaged.
Use the supplied descaling funnel to
protect the appliance front from the
descaling agent. Clean up any
descaling spills immediately to
avoid damage to the appliance
front. Thoroughly clean the water
tank and the drip tray of descaling
residues.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Descaling the appliance
^ The display will prompt you through
^ Please fill the water tank with tap
water to the descaling mark and
reinsert it: Take the water tank out,
rinse out any descaling residues
thoroughly with water. Fill with fresh
water to the k mark.
the next steps:
– to fill the descaling agent into the
water tank
– take the water tank out
– fill the water tank with fresh lukewarm During rinsing water runs from the
tap water to the mark k. If not filled
to the mark, the descaling will be
canceled prematurely and
incomplete
dispensers. When the display shows
Please empty the drip tray: Empty the
drip tray. Since the machine is also
rinsed inside, the drip tray needs to be
emptied to continue rinsing.
Dissolve two of the enclosed
descaling tablets in the water. Close
the water tank and insert into
position.
When the display shows: Process
finished: Descaling is complete. Follow
the prompts in the display. The
appliance is rinsed a final time.
Since the lines are drained during
descaling, they must be filled with
water before the next use. See
"Making coffee - Cappuccino and
milk froth".
^ Set the descaling funnels under the
hot water and froth dispensers. Set
the funnel in the holes of the drip tray
so the dispensed liquids are guided
in the drip tray.
During the descaling process the
descaling solution will flow from the hot
water and froth dispensers. The
machine rests briefly to allow the
solution to take affect before
dispensing again.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Repairs to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held responsible for unauthorized work.
Machine Problems
The light does not illuminate when the appliance is turned on.
– Is the unit locked?
– Is the lighting turned off?
– See "Settings - Lighting".
If not, the light bulb has burnt out.
Contact Miele's Technical Service
Department.
The heating phase takes a long time.
When the door is opened during the Keep the door closed during the heating
heating up phase, e.g. to fill the
water tank, the heating element turns
off. The unit heats only with the door
closed.
phase.
The light turns off suddenly.
The light turns off automatically when the machine has not been used for
10 minutes.
The display messages are difficult to read.
The contrast or brightness of the
displays are too low / high.
Adjust the display contrast / brightness.
See "Settings - Display".
The display remains dark.
The unit has no power.
– The main switch is turned off.
– The machine is not plugged in.
– Check that the fuse had not blown or is
defective. If the fuse has blown contact
Miele's Technical Service Department.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
The unit suddenly turns off.
– Is the machine programmed to
switch off after a programmed
time?
– The machine goes into standby mode
when not used for a programmed time.
See "Settings - Timer - Turning off after".
– The water temperature could be to – The unit is locked until the water has
high. cooled.
– There could be pebbles within the – Call Miele's Technical Service
coffee beans. The unit shuts off
after 20 secs. to avoid damages.
Department.
– Is the machine plugged in?
– Plug in the machine.
The door cannot be closed.
Check if all containers are properly inserted.
The door is hard to open and close, and the gasket of the connector is
pulled off.
Adjust the door with the door hinges. See "Installation - Adjusting the door
hinges".
The gasket of the coffee dispenser connector is damaged and leaking.
– The gasket is worn.
– Change the gasket with a new one
(supplied).
– Check the door. Is the alignment
off from damage to the gasket?
– Adjust the door with the door hinges.
See "Installation - Adjusting the door
hinges".
The grind control lever will not move.
Close the unit and prepare a coffee/espresso. The grind grade can now be reset.
The brew unit cannot be taken out.
The brew unit is not in the correct
position.
Close the door and turn the appliance on.
The brew unit will position itself into the
correct position.
The cover of the ground coffee funnel cannot be pushed in properly.
Close the lid of the ground coffee funnel.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Preparing / dispensing problems
No water, steam or milk is dispensed from the froth dispenser.
– The water tank is not correctly
inserted.
– Take out the water tank and reinsert it.
– Clean the froth dispenser as described
in "Cleaning and Care - Froth
dispenser/Intake hose".
– The dispenser is clogged.
The grinding sounds louder than usual.
There could be pebbles within the
coffee beans.
Turn off the unit immediately.
Contact the Miele's Tech. Service.
The grinding is quieter than usual.
The coffee bean container is empty. Wait until no sound is heard and refill the
The respective message appears in coffee bean container.
the display.
The coffee/espresso flows too fast into the cup.
The grind control is set too coarse.
Set the grind control to a finer grind.
The coffee/espresso flows too slow into the cup.
The grind control is set too fine.
Set the grind control to a coarser grind.
The coffee/espresso is not hot enough.
– Were the supply lines pre-heated? – The smaller the cup, the more
important it is to pre-heat.
– The temperature is set too low.
– Check on what temperature range the
coffee type is set.
– Check if the brew unit is clogged. – Clean the brew unit.
No drink is prepared although the beans were grinded and enough water is
in the container.
– The grind control is set to the
finest or the grind amount is set to
the maximum.
– Set the grind control or the grind
amount to a different position.
– The process is timed, the process
might need so long, there is no
time for brewing any more.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
The steam heating system is turned off but steam can still dispensed.
Steam can be dispensed as long as the steam heating system is heated. Once it
has cooled, steam can only be dispensed once the steam system has heated.
The coffee dispensing is interrupted.
The water tank is empty.
Refill the water tank with fresh cold tap
water.
You will be asked whether you would like
the coffee dispensing to continue after the
water tank has been filled. If you do not
confirm with "OK" within 5 minutes the
coffee preparation will be cancelled.
Instead of coffee only water is dispensed.
– The beans may have gotten stuck. – Pull the bean container out and push it
back in.
– The ground coffee funnel cover
was opened and closed and a
preparation with ground coffee
was selected but no ground coffee
was inserted.
The coffee system switches
automatically back to beans use
after the preparation.
The drip tray is empty but a message to empty it is displayed.
– The metal contacts are soiled or
wet.
– Clean and dry the contacts.
– Check if the drip tray is inserted
correctly.
– Insert the drip tray as described in
"Cleaning and Care - Drip tray".
– Turn the machine off and on again with
the main switch.
– If the message still appears contact
Technical Service.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
The machine does not rinse when turned on although the automatic rinse
feature is set to "On".
When the machine is still at a temperature of about 140°F (60°C). The machine
will not rinse when it's too hot.
The water dispensing stops when programming the serving size.
– There was not enough water in the – Fill the water tank before programming
tank. The dispensed water amount
will not be saved.
the serving size.
– If the maximum water amount is
dispensed, the water flow stops
automatically. The maximum water
amount is saved.
Water is in the waste unit.
This is not a fault.
This is residual water from the cleaning
process.
"Coffee water" is in the waste unit.
If the grind control is set to very fine, If the grind control is not set to very fine,
there might be coffee water in the contact Technical Service.
waste unit.
The descaling process was started accidently.
The descaling process cannot be canceled once it is started. The process
needs now to be completed. This is a safety feature to ensure the process will be
completed. It is important for best results and the longevity of the machine.
The preheating time is increased, the water flow amount is not correct and
the unit performs less?
The machine needs to be descaled. See "Descaling the appliance".
No water flows from the spouts.
The filters in the brew unit are
clogged.
Rub any residue off the filters with a
sponge.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
The brew unit or waste unit could not be pulled from the machine.
– The brew unit is not in the basic
position.
– Close the door. The brew unit
automatically gets into the basic
position.
– The door was opened during
grinding or brewing.
No crema has formed or it is "different".
– Check if the grind control is set too – The coffee is not fresh enough.
coarse or too fine.
– The coffee is unsuitable for use in this
– Check what temperature range the
coffee type is set. If the
machine. See "Filling the beans
container".
temperature is too high, there are
black areas in the crema.
– The coffee dispensers are set too high.
Too much crema has formed and is above the coffee dispensers.
Some coffee types produce too
much crema when the coffee /
espresso temperature is set to the
maximum and the amount of ground
coffee is too much.
Lower the temperature and amount of
ground coffee.
The milk froth does not flow but "spits".
Before using for the first time the water lines need to be filled. See "Making
coffee - Cappuccino and milk froth".
When preparing milk froth for the first time, the milk is spit from the mug.
The door was opened during the
Keep the door closed during the heating
heating phase. High steam pressure phase.
has built making the steam
dispensed too strong when the valve
is opened.
When preparing milk froth the preparation starts, stops then starts again.
This is not a fault. The start and stop action aids the machine in preparing the
best froth possible.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
"F" messages
The message F 10 or F 17 appears in the display.
No water is dispensed.
– The water tank is not inserted properly.
Take it out and reinsert correctly.
– The water tank was not filled correctly
during the descaling process. Fill the
water tank up to the correct mark.
– After fixing the fault, the machine turns
off then on again. Start the desired
preparation again.
– If the message still appears contact
Technical Service.
The message F 73 shows or "Check brew unit" appears in the display.
The brew unit is clogged and cannot – Select "Clear".
reset to the correct position.
– Take out and clean the brew unit. See
"Cleaning and Care - Brew unit".
– Reinsert the brew unit and close the
door.
– If the message still shows contact
Technical Service.
The message "Too much ground coffee" appears in the display.
If too much ground coffee passes
through the coffee chute the machine
is unable to process it so it can be
emptied into the waste container.
– Select "OK".
The machine is now ready for use.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of a fault which you cannot MieleCare
easily fix yourself, please contact the
(USA only)
Miele Technical Service Department at
the contact information on the back of
this booklet.
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
When contacting the Technical Service
Department, please quote the model
and serial number of your appliance
given on the data plate inside the
appliance.
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
53
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of packing material
Disposal of an old appliance
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Please recycle.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Important
Ensure that power is not supplied to
the machine while installation or
maintenance work is performed.
The coffee system comes equipped
with a 6 ft (1.8 m) power cord with a
NEMA 5-15P molded plug for
connection to a 120 V, 15 A, 60 Hz
power supply.
All electrical work should be
performed by a qualified electrician
in strict accordance with national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous.
The manufacturer cannot be held
responsible for unauthorized work.
Verify that the voltage, load and circuit
rating information found on the data
plate match the household electrical
supply before installing the coffee
system.
If there is any question concerning the
electrical connection of this appliance
to your power supply, please consult a
licensed electrician or contact Miele’s
Technical Service Department. See
back page for contact information.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation options
The coffee system is designed to be built into cabinetry.
Miele appliances can be installed flush or proud. Discuss your installation
requirements with your architect, designer and installer.
A combination with other Miele built in appliances is possible. If the machine is
installed in combination with other appliances, it should be installed with a
protective base between the appliance and the unit (exception: installation with a
built-in plate warmer).
A special display cabinet is also available from your dealer or Miele, as an
installation option.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation
^ If your cabinet has 3/4" (19 mm) side
walls, drill four holes for the
mounting.
Make sure power is not supplied to
the appliance while installation or
maintenance work is performed.
Disconnect the power supply to the
work area by unplugging the unit,
tripping the circuit breaker or
removing the fuse. The coffee
system must be installed into
cabinetry before being used.
^ Center the unit and turn the screws a
little bit in and then out again.
^ Take the unit out of the niche and drill
four holes at the screw markings
(1/16" [2 mm], diameter 3/16"
[4.5 mm]).
^ Plug the appliance into the electrical
outlet.
^ Push the appliance into the niche.
^ Unscrew the height adjustable feet
on the underside of the machine
about 1/16" (2 mm).
^ Push the appliance all the way back
into the cabinet and center it. If
necessary level the unit with the four
height adjustable feet.
^ Open the door and partially tighten
the screws.
^ Carefully turn the lower screws, a, to
center the machine.
The feet can be turned out up to 3/8"
(10 mm).
^ To secure the appliance in the
cabinet, tighten the upper screws, b,
by hand. Do not use an electric
screwdriver.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Adjusting the door hinges
The door hinges can be adjusted if the
door cannot be opened easily.
^ To adjust the door sideways, a, turn
screw a.
^ To adjust the door to the front or
back, b, turn screw b.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 0409
CVA 4070
M.-Nr. 07 194 170 / 03
For the most updated manual see the Miele web site.
Download from Www.Somanuals.com. All Manuals Search And Download.
|