Miele Clothes Dryer T 1576 User Manual

Operating Instructions

Vented Dryer

T 1576

To prevent accidents

and machine damage

read these instructions

before installation or use.

M.-Nr. 05 658 821

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Do not use fabric softener sheets

,^{WARNING - To reduce the risk of}

to eliminate static in the dryer. Best

results occur when a liquid softener is

used in the washing machine.

fire, electric shock, or injury when

using your appliance, follow basic

precautions, including the following:

Do not use heat to dry articles

containing foam rubber or similarly

textured rubber-like materials and items

containing, hairspray, nail polish

remover or similar substances.

Read all instructions before using

the appliance.

Do not dry articles that have been

previously cleaned, washed,

soaked in, or spotted with gasoline,

dry-cleaning solvents, or other

flammable or explosive substances.

They give off vapors that could ignite or

explode.

Clean the lint filter before or after

each load.

Keep the area around the air intake

(toekick) and adjacent surrounding

areas free from lint, dust and dirt.

Do not allow children to play on or

in the appliance. Close supervision

is necessary when the appliance is

used near children. Always close the

door after use to prevent child hazards.

The interior of the machine and

exhaust duct should be cleaned

periodically by qualified personnel.

Do not place items exposed to oils

in your dryer. Items contaminated

with oils may contribute to a chemical

reaction that could cause the laundry to

catch fire.

Before this appliance is removed

from service or discarded remove

the door to the drying compartment.

Do not reach into the dryer if the

drum is moving.

Do not install or store this

appliance where it will be exposed

to the weather.

Do not tamper

with the controls.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Do not repair or replace any part of

the appliance or attempt any

servicing unless specifically

recommended in these Operating

Instructions. Repairs to electrical

appliances should only be performed

by qualified personnel. Incorrectly

repaired machines may pose a

considerable risk to the user.

WARNING – Improper connection

of the equipment grounding

conductor can result in a risk of electric

shock. Check with a qualified

electrician or service representative or

personnel if you are in doubt as to

whether the appliance is properly

grounded.

Do not modify the plug provided

with the appliance: if it will not fit

the outlet, have a proper outlet installed

by a qualified electrician.

GROUNDING INSTRUCTIONS

This appliance must be grounded.

In the event of malfunction or

breakdown, grounding will reduce the

risk of electric shock by providing a

path of least resistance for electric

current. This appliance is equipped

with a cord having an equipment

grounding conductor and a grounding

plug. The plug must be plugged into an

appropriate outlet that is properly

installed and grounded in accordance

with all local codes and ordinances.

SAVE THESE INSTRUCTIONS

This dryer is intended for

residential use only!

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the dryer

1 Power cord with plug

2 Control panel

3 Door

4 Exhaust connection (left or rear)

5 Four height adjustable screw feet

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the dryer

Control panel

a "On/Off" button

d Drying options

Turns the machine on and off or

cancels a program. If the dryer is

turned on the drum interior will light

when the door is opened.

e Program selector

The program selector can be turned

clockwise or counterclockwise.

The light ring goes off:

b "Door" button

– if a program is not selected after

turning the machine on or if the

program was not started.

Opens the door or can be used to

cancel a program.

– a few minutes after the end of a

program.

c "START" button

Begins the selected program.

The indicator:

f Program sequence display

– flashes when the program can be

started.

shows the current cycle of the drying

program.

– illuminates once a program has

started.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before loading the dryer

Drying tips

The appliance must be correctly

installed and connected before the

first use. Please see the "Installation

instructions".

Knitted fabrics and flannel tend to

shrink when washed and dried for the

first time. Do not over dry these fabrics.

Permanent press and delicate fabrics

tend to crease.

For better drying results reduce the

load size and select the "PERMA

PRESS/Hand iron" program.

^ Check the dryer drum for any residue

that may have deposited during the

manufacturing process. If necessary

clean out with a cloth.

To prevent discoloration, do not dry

new dark-colored fabrics with

light-colored items.

Before drying, check fabric care

labels for special drying instructions.

q = Dry with normal temperature

r = Dry with low temperature

(select "Gentle" option)

Do not overload the drum!

Overloading the dryer will result in poor

drying and wrinkling.

s = do not dry in tumble dryer

Close zippers and tie up fabric belts

and apron ties.

If no symbol is present:

Do not dry items that may melt or ignite

in the dryer such as plastics, rubber or

sneakers.

Dry cottons and permanent press

laundry in their corresponding

programs.

Dry delicate fabrics like polyester, in the

"PERMA PRESS" program with the

"Gentle" option.

Dry wool and wool blends in the

"Woolens" program.

Dry pure linen and down filled items in

the "Line Dry" program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the dryer

1. Turn on the dryer and load

the laundry

^ Press the "On/Off" button to turn on

the dryer.

^ Press the "Door" button to open the

door.

^ Load the laundry loosely into the

drum.

^ Close the door with a firm swing - do

not push it shut.

Do not use fabric softener sheets in

this dryer. Silicates contained in

these sheets could cause the dryer

to overheat.

To prevent fabric damage, check

that laundry will not be caught in the

closed door.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the dryer

2. Select a program

^ Turn the program selector clockwise

or counterclockwise to the desired

program.

Please refer to the "Programs" chart.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programs

Program

COTTONS

Extra dry

Fabric

Note

For drying laundry that will be The "Extra dry" program should

stored away, such as linens or not be selected for jersey

seasonal clothing.

materials. Items may shrink.

Normal+

Normal

Uniform loads of cotton e.g.

sheets, underwear, socks.

Knitted cotton fabrics that may If items are still damp, redry

shrink, e.g. jersey material or

lightweight cottons.

using "Normal+".

Hand iron r

Cotton or linen fabrics to be

left damp for easier ironing.

Hand iron rr

If fabrics are too damp for

ironing, redry using "Hand iron

r".

Rotary iron

Cotton or linen fabrics, which

To prevent moisture loss, roll up

will be ironed with a rotary iron. the laundry until ironing.

PERMA PRESS

Normal+

Permanent press items.

Normal

Permanent press and blended

fabrics made of blended

woven or knitted fabrics, e.g.

cotton/synthetic.

Hand iron

Permanent press and blended Reduce load size for fabrics that

fabrics, requiring an ironed

finish.

wrinkle easily.

TIMED CYCLES

20 mins.

Individual items or very small

loads.

Fluff

Individual items to be

freshened and fluffed with cool

air.

Special programs

Woolens

Line Dry

Wool and wool blend fabrics

Take items out immediately after

the end of the program while still

slightly damp. Allow items to air

dry.

Program for reducing creasing

cotton, linen or permanent

press fabrics made of cotton,

blends or synthetics.

Download from Www.Somanuals.com. All Manuals Search And Download.

Drying options

3. Select a drying option

(if needed)

Low energy

For drying temperature sensitive

fabrics.

The program running time will be

extend.

Turbo

Fast drying for sturdy fabrics with

increased temperature and air flow.

Do not dry delicate fabrics with this

option.

Gentle

^ Select the option before starting a

program by pressing the respective

button.

For drying delicate fabrics at a lower

temperature and extended time.

Buzzer

Indicator light:

A tone will sound at the end of a

program.

on = dry option selected

off = dry option not selected

The volume of the buzzer can be

adjusted:

Some drying options are not available

in all programs. The dryer will not allow

you to choose an option that will conflict

with the selected program.

1. Select a program.

2. Press the "Buzzer" button, until you

hear the desired volume.

3. Release the "Buzzer" button to set the

volume. Start the program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the dryer

4. Start the program

5. At the end of a program

The "Anti-crease/End" indicator will light

at the end of a program.

^ Turn the program selector to "Finish".

^ Press the "Door" button to open the

door.

^ Press the "START" button.

^ Remove the laundry.

^ Check that the drum is empty.

^ Clean the lint filter after each use

(see "Cleaning and care".)

^ Press the "On/Off" button to turn off

the dryer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the dryer

Changing a program

Adding or removing laundry

during a program

Once a drying program has started,

changes to the program and any

selected drying options can only be

made by cancelling the current

program.

^ Press the "Door" button.

Once the door pops open, laundry can

be added or removed.

^ Close the door and press "START" to

continue drying.

To cancel the current program:

^ Turn the program selector to "End".

When the program has been canceled

the "Anti-crease/End" indicator lights.

^ Turn the program selector either

clockwise or counterclockwise to the

new program.

^ Select any desired drying options.

^ Press "START".

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety lock

Child safety lock

To activate the child safety lock

When activated, the safety lock

prevents the dryer from being operated

by locking the control panel functions.

1. Close the door and turn the program

selector to "End".

2. Turn on the dryer using the "On/Off"

button.

3. Press and hold the "Turbo" button

while performing steps 4. to 6.

4. Turn the program selector slowly

step by step clockwise to

"COTTONS/Normal".

5. Turn the program selector slowly

step by step counterclockwise to

"End".

6. Turn the program selector slowly

step by step counterclockwise to

"PERMA PRESS/Hand iron".

The "Locked" indicator will flash.

7. Release the "Turbo" button.

The child safety lock function is now

activated.

8. Turn off the machine using the

"On/Off" button.

To deactivate the child safety lock

^ Repeat steps 1 to 7.

The "Locked" indicator will go out after

step 6.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dryer care

Cleaning the lint filter

Before cleaning the tumble dryer,

The lint filter must be cleaned before

or after every program.

disconnect the machine from the

power supply.

Never use abrasive cleaners,

scouring pads, steel wool or caustic

(oven) cleaners on the dryer. They

will damage the surface.

Cleaning the exterior and the

control panel

^ The exterior and the control panel

can be cleaned with warm water and

liquid dish soap applied with a soft

sponge.

^ Wipe dry using a soft cloth.

Cleaning the drum and

stainless steel parts

^ Open the door and remove the lint

filter.

^ Stainless steel surfaces can be

cleaned using a non-abrasive

stainless steel cleaner.

^ Wipe the lint off the filter with your

hand, do not use any sharp objects!

^ Wipe dry using a soft cloth.

^ Any lint remaining in the hollow part

of the door can be removed through

the gap at the bottom with a dust

brush or vacuum.

^ Return the lint filter and close the

door.

The lint filter can be rinsed with hot

water if necessary.

^ Dry the lint filter before putting it back

in place.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dryer care

Changing the light bulb

Power failure - Emergency

door release

,^WARNING

To reduce the risk of electric shock,

disconnect this appliance from the

power supply by unplugging or

tripping the circuit breaker.

^ Pull forward on the unhinged side of

the door.

^ Unscrew the plastic bulb cover

located inside the drum and above

the door (see illustration.)

^ Replace the light bulb with a

temperature proof bulb (part # 02

150 900) available from Miele’s

Technical Service Department.

The light bulb must not exceed the

maximum wattage quoted on the

data plate.

^ Refit the plastic bulb cover.

Take care that the bulb cover is

tightened into place. Otherwise

moisture may penetrate the socket

and cause a short circuit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

With the following guide, minor problems can be fixed without a service call.

What if . . .

Possible fault

Fix

. . . the dryer fails to

start when turned on? lit you may not have

selected the program

If the "On" indicator is

Reselect the program in the

correct sequence, see

"Using the dryer".

properly.

If the "On" indicator is not – The "ON/OFF" button is

lit, check that:

pressed in.

– The door is properly

closed.

– The machine is plugged

in and the fuse or circuit

breaker has not tripped.

. . . the laundry has

static cling?

Add fabric softener to the

final rinse of the wash to

reduce static cling.

. . . the laundry is not

dry enough?

Select a more intensive

program or the "Turbo"

option.

. . . the program runs

too long?

The air supply is

insufficient.

Open a window or door to

increase air flow.

The air can not be

vented properly.

– Clean the lint filter.

– Check and clean the

exhaust vent for clogs.

The laundry was not

spun sufficiently in the

washer.

Spin laundry thoroughly

before drying.

. . . the light ring does A program was not

Select a program.

not light?

selected or the selected

program has ended.

. . . the drum light does The bulb may be bad or Change the light bulb. See

not come on? burned out. "Cleaning and care".

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if . . .

Possible fault

Fix

. . . the "Locked"

indicator flashes after

turning the dryer on?

The child safety lock is

activated.

Deactivate the safety

lock. See "Child safety

lock".

. . . the "Locked"

indicator lights during

drying?

This is not a fault.

It will go off after the

program has finished.

. . . the "Drying"

indicator flashes?

The program selector was Turn the program selector

moved after the start of back to the original

the program. This will not setting. The indicator light

affect the program. will go out.

There may be a technical – Turn the dryer off and

. . . the "Anti-crease /

End" indicator flashes? fault.

on.

– Select and start the

program.

– If the indicator still

flashes, there is a

technical fault. Call the

Miele Technical Service

Department.

Freezing temperatures

– Install the dryer in a

may affect the dryer.

warmer room.

. . . the program stopped Dry laundry or a single

Single items should be

and the "Anti-crease/

End" indicator is lit?

item will cause the dryer dried with a "Timed cycle"

to stop. program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Guide

Remove this guide for easy reference

Please read all

instructions, especially

the "Important Safety Instructions",

before using the dryer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Guide

1. Turn on the dryer and load the

laundry.

2. Select a program

^ Press the "On/Off" button to turn on

the dryer.

^ Press the "Door" button to open the

door.

^ Turn the program selector clockwise

or counterclockwise to the desired

program.

^ Load the laundry into the drum. Make

sure that there is enough space in the

drum for clothes to tumble freely.

To prevent fabric damage, check

that laundry will not be caught in the

closed door.

^ Close the door with a firm swing - do

not push it shut.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Guide

3. Select a drying option (if needed)

4. Start the program

^ Press "START".

5. At the end of a program

The "Anti-crease / End" indicator will

light.

^ Turn the program selector to "End".

^ Press the button of the drying option

you would like to select.

^ Press "Door" and remove the laundry.

^ Clean the lint filter.

^ Press the "On/Off" button to turn off

the dryer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Guide

Program

Fabric

Note

COTTONS

Extra dry

Multi-layer fabrics, mixed loads The "Extra dry" program should

of sturdy cottons, e.g. jeans,

towels.

not be selected for jersey

materials. Items may shrink.

Normal+

Normal

Uniform loads of cotton e.g.

sheets, underwear, socks.

Knitted cotton fabrics that may If items are still damp, redry

shrink, e.g. jersey material or

lightweight cottons.

using "Normal+".

Hand iron r

Cotton or linen fabrics to be

left damp for ironing.

Hand iron rr

If fabrics are too damp for

ironing, redry using "Hand iron

r".

Rotary iron

Cotton or linen fabrics, which

To prevent moisture loss, roll up

will be ironed with a rotary iron. the laundry until ironing.

PERMA PRESS

Normal+

Synthetic permanent press

items made.

Normal

Permanent press and blended

fabrics made of blended

woven or knitted fabrics, e.g.

cotton/synthetic.

Hand iron

Permanent press and blended

Reduce load size for fabrics that

fabrics, requiring an ironed finish. wrinkle easily.

TIMED CYCLES

20 mins.

Individual items or very small

loads.

Fluff

Individual items to be

freshened and fluffed with cool

air.

Special programs

Woolens

Wool and wool blend fabrics

Take items out immediately after

the end of the program while still

slightly damp. Allow items to air

dry.

Line Dry

Program for reducing creasing cotton, linen or permanent press

fabrics made of cotton, blends or synthetics.

Download from Www.Somanuals.com. All Manuals Search And Download.

After Sales Service

In the event of a problem which you

cannot fix yourself, or to order spare

parts please contact:

PC Update

The indicator marked PC allows a

technician to update the dryer to make

use of new technology.

– Your Miele Dealer

For example, if new programs or fabrics

are developed, a service technician will

be able to modify the existing program

cycles accordingly.

– The Miele Technical Service

Department

USA 1-800-999-1360

[email protected]

CDN 1-800-565-6435

[email protected]

When contacting the Technical Service

Department, please quote the model

and serial number of your appliance.

They can be found on the data plate

located below the drum opening.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Installation, repair and mainten-

ance work should be performed by

a Miele authorized service technician.

Work by unqualified persons could be

dangerous and could void the warranty.

This dryer must be vented

outdoors. Observe local building

codes.

Install the venting in such a way

that the expelled air cannot be

drawn back into the machine.

Before installation, disconnect the

tumble dryer from the electrical

supply by shutting off the power main,

unplugging the power cord or tripping

the circuit breaker. Do not restore

power until the installation is complete.

Do not vent the dryer into a

chimney used by gas, fuel boilers,

heaters, a fireplace chimney, a wall, a

ceiling or a concealed space of a

building.

GROUNDING INSTRUCTIONS

This appliance must be grounded.

In the event of malfunction or

If there is any doubt concerning

installation, contact Miele’s

Technical Service Department.

breakdown, grounding will reduce the

risk of electric shock by providing a

path of least resistance for electric

current. This appliance is equipped

with a cord having an equipment

grounding conductor and a grounding

plug. The plug must be inserted into an

appropriate outlet that is properly

installed and grounded in accordance

with all local codes and ordinances.

1-800-999-1360

[email protected]

1-800-565-6435

[email protected]

WARNING – Improper connection

of the equipment grounding

conductor can result in a risk of electric

shock. Check with a qualified

electrician or service representative or

personnel if you are in doubt as to

whether the appliance is properly

grounded.

Do not modify the plug provided

with the appliance! If it will not fit

the outlet, have a proper outlet installed

by a qualified electrician.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Disposal of the packing

materials

Disposal of an old appliance

Old appliances may contain materials

that can be recycled. Please contact

your local recycling authority about the

possibilty of recycling these materials.

The cardboard box and packing

materials protect the appliance during

shipping. They have been designed to

be biodegradable and recyclable.

Ensure that the appliance presents no

danger to children while being stored

for disposal. Before discarding an old

appliance, unplug it from the outlet and

cut off its power cord and remove any

doors to prevent hazards.

To prevent suffocation ensure that any

plastic wrappings, bags etc. are

disposed of safely and kept out of the

reach of children.

Please recycle.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Level the dryer

An air flow gap of ³/₈" (10 mm) must

be provided between the machine

and the floor. This air flow gap must

not be blocked by a toekick or thick

piled carpets.

The tumble dryer can also be placed

on top of a Miele washing machine for a

stacked installation. An appropriate

stacking kit is required.

The stacking kit, part # 12 996 026, is

available from your Miele dealer or the

Miele Technical Service Department.

The dryer must be level to ensure safe

and proper operation. Minor

discrepancies do not, however, have an

adverse effect on operation.

^ The machine can be leveled by

turning the legs clockwise or

counterclockwise as necessary.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Installation tips

– For best drying results, avoid extra

long ducting with too many bends or

angles. Avoid ducting in tight

corners.

– Use flexible metal pipe or rigid metal

pipe for venting. Non-metallic flexible

hose should not be used since it is a

potential fire hazard.

– The shorter the exhaust ductwork,

the more efficient the dryer will be.

Expelled air is slowed down in the

ducts due to friction against the inner

walls. The shorter and smoother the

inner walls are, the less friction that

will be created.

An elbow or bend creates more

friction than a straight duct. An

additional duct length factor must

therefore be added for each elbow or

bend (see Table 1.) This factor

expresses the restistance of the

bend in terms of a straight length of

duct.

The additional length factor is then

added to the measured duct length

to give the effective duct length.

A larger duct diameter helps to

reduce friction. The duct diameter

should therefore be increased with

increasing duct length.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Calculate the effective duct

length

Table 1

Type

of bend

Angle

Radius

Additional

duct length

The overall duct length will determine

the duct diameter.

inch cm inch cm

^ Measure the actual duct length

needed:

Flexible

metal duct

90 ° up to 40.6 20"

50.8

30.5

16"

45 ° up to 40.6 12"

16"

1. Establish the number of elbows or

bends necessary, noting the type of

bend, angle and radius involved

(see, Table 1).

Smooth

metal duct

90 °

14"

35.6

Elbow 90°

sharp;

no radius

90 °

90" 228.5

2. Add the additional duct length as

specified in Table 1 to the actual

duct length to get the effective duct

length.

Concertina

bend

90 °

8" 20.3 28"

71.1

Wall vent kit

with louvres

window

vent kit

142" 360.7

3. The necessary duct diameter can

then be found in Table 2.

Note:

Wall vent kit

with flap or

window

99" 251.5

193" 490.2

Drying times and energy consumption

remain unaltered for 4" (100 mm) duct

up to a total length of 66 ft. (20 m).

Longer ducts may lead to slight

increases, but, the function will not be

impaired as long as the necessary duct

diameter is used (Table 2).

vent kit

Exhaust

connection

left side

Table 2

Internal diameter or

edge length

Effective duct

length

inches

100

125

150

0 - 66

66 - 100

100 - 140

0 - 20

20 - 30

30 - 42.7

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Flexible metal ducting has been used

for the following example. Other duct

types may require additional duct

length (see Table 1.)

Result:

A duct diameter of 4" (100 mm) is

adequate since the effective length is

less than 66 ft. (20 m) as specified in

Table 2.

Example:

Vent connection left . . . . . . . 39" (1.0 m)

Length (L). . . . . . . . . . . . . . . 47" (1.2 m)

Lower radius (R). . . . . . . . . . 19" (0.5 m)

Height (H). . . . . . . . . . . . . . . 39" (1.0 m)

Upper radius (R) . . . . . . . . . 19" (0.5 m)

Wall pipe w/ grill frame. . . . 149" (3.8 m)

Effective duct length . . . . 312" (8.00 m)

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Wall vent duct

Dryer top view

1. Louvred wall vent frame

2. Wall vent duct

3. Adapter

4. Louvred wall vent

5. Flap

1. Wall pipe

6. Screw

2. Flexible foam gasket

A flexible foam gasket must be used if

the tumble dryer is directly connected

to the wall vent.

inch

4 ¹/₄"

10.8

23 ¹/₂"

28 ¹/₂"

72.5

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Example 1

Connect the ducting

Connection of the rigid metal pipe to

the dryer (side view).

^ Attach the ducting to the vent.

^ Move the dryer close to its final

position.

^ Attach the ducting to the exhaust port

via the duct adapter, securing with

duct tape or a hose clamp.

1. KA-pipe

2. Adapter

Example 2

Height of vent adapter in a stacked

installation.

inch

4 ³/₄"

22 ⁵/₈"

27 ¹/₂"

36 ¹/₄"

66 ¹/₈"

57.5

168

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

To change the exhaust connection

from the rear of the machine to the

left side of the machine

^ Press the retaining clip of the cap

covering the left exhaust port

upwards, turn it counterclockwise.

^ Secure the connector into the side

port by pressing it in and turning it

clockwise.

^ Seal the rear exhaust port with the

cap.

^ Remove the vent socket from the rear

exhaust port by inserting a thin

screwdriver into the slot by the

retaining clip. Press the clip gently

upwards and at the same time turn

the connector counterclockwise.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Make the electrical connection Electrical connection

The dryer comes with a 5 ft long, 12/4

AWG cord and a NEMA 14-30 P plug.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In

the event of malfunction or

breakdown, grounding will reduce

the risk of electric shock by

providing a path of least resistance

for electric current. This appliance is

equipped with a cord having an

equipment grounding conductor and

a grounding plug. The plug must be

plugged into an appropriate outlet

that is properly installed and

It should be connected to a

120/208-240 V, 15 A, 60 Hz AC power

supply. A 3 pole-4 wire grounding

power outlet (NEMA type 14-30 R) is

necessary.

EASY INSTALLATION KIT

If you do not have a dedicated 15 Amp

line for this appliance, but you have the

standard, 120/208-240 V - 30 Amp,

60 Hz AC outlet, you can use the "Easy

Installation Kit", which allows you to use

that line to connect this appliance.

grounded in accordance with all

local codes and ordinances.

WARNING – Improper connection of

the equipment grounding conductor

can result in a risk of electric shock.

Check with a qualified electrician or

service representative or personnel

if you are in doubt as to whether the

appliance is properly grounded.

057B for on-site outlet NEMA 10-30 R

060B for on-site outlet NEMA 14-30 R

For more information on the "Easy

Installation Kit" or if you have questions

concerning the electrical connection

please contact:

USA 1-800-999-1360

[email protected]

Do not modify the plug provided with

the appliance: if it will not fit the

outlet, have a proper outlet installed

by a qualified electrician.

CDN 1-800-565-6435

[email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

M.-Nr. 05 658 821 / 04

This bio-friendly paper was bleached without the use of chlorine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Blower DAG 1000 User Manual
MTD Lawn Mower 110 011 User Manual
Multiquip Hair Care Product RX 1510 C I CI User Manual
Murray Snow Blower 1695720 User Manual
NEC Computer Accessories MA4000 User Manual
Nikon Film Camera 140ED User Manual
NordicTrack Home Gym NTBE01100 User Manual
Oregon Scientific Clock Radio RM116E RM616N User Manual
Panasonic Blu ray Player DMP BD79 User Manual
ParaBody Home Gym 920101 User Manual