Miele Clothes Dryer Condenser Dryer User Manual
Operating Instructions  
Condenser Dryer  
T 1570 C  
U
To prevent accidents  
and machine damage  
read these instructions  
before installation or use.  
M.-Nr. 03 719 550  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Do not use fabric softener sheets  
,WARNING - To reduce the risk of  
to eliminate static in the dryer. Best  
results occur when a liquid softener is  
used in the washing machine.  
fire, electric shock, or injury when  
using your appliance, follow basic  
precautions, including the following:  
Do not use heat to dry articles  
containing foam rubber or similarly  
textured rubber-like materials and items  
containing, hairspray, nail polish  
remover or similar substances.  
Read all instructions before using  
the appliance.  
Do not dry articles that have been  
previously cleaned, washed,  
soaked in, or spotted with gasoline,  
dry-cleaning solvents, or other  
flammable or explosive substances.  
They give off vapors that could ignite or  
explode.  
Clean the lint filter before or after  
each load.  
Keep the area around the air intake  
(toekick) and adjacent surrounding  
areas free from lint, dust and dirt.  
Do not allow children to play on or  
in the appliance. Close supervision  
is necessary when the appliance is  
used near children. Always close the  
door after use to prevent child hazards.  
The interior of the machine and  
exhaust duct should be cleaned  
periodically by qualified personnel.  
Do not place items exposed to oils  
in your dryer. Items contaminated  
with oils may contribute to a chemical  
reaction that could cause the laundry to  
catch fire.  
Before this appliance is removed  
from service or discarded remove  
the door to the drying compartment.  
Do not reach into the dryer if the  
drum is moving.  
Do not install or store this  
appliance where it will be exposed  
to the weather.  
Do not tamper  
with the controls.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT SAFETY INSTRUCTIONS  
Do not repair or replace any part of  
the appliance or attempt any  
servicing unless specifically  
recommended in these Operating  
Instructions. Repairs to electrical  
appliances should only be performed  
by qualified personnel. Incorrectly  
repaired machines may pose a  
considerable risk to the user.  
WARNING – Improper connection  
of the equipment grounding  
conductor can result in a risk of electric  
shock. Check with a qualified  
electrician or service representative or  
personnel if you are in doubt as to  
whether the appliance is properly  
grounded.  
Do not modify the plug provided  
with the appliance: if it will not fit  
the outlet, have a proper outlet installed  
by a qualified electrician.  
GROUNDING INSTRUCTIONS  
This appliance must be grounded.  
In the event of malfunction or  
breakdown, grounding will reduce the  
risk of electric shock by providing a  
path of least resistance for electric  
current. This appliance is equipped  
with a cord having an equipment  
grounding conductor and a grounding  
plug. The plug must be plugged into an  
appropriate outlet that is properly  
installed and grounded in accordance  
with all local codes and ordinances.  
SAVE THESE INSTRUCTIONS  
This dryer is intended for  
residential use only!  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the dryer  
1 Supply cable with plug  
2 Control panel  
3 Drum door  
4 Exhaust connection (right, left or rear)  
5 Four height-adjustable legs  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Guide to the dryer  
Push buttons  
Indicators  
– Door  
– Empty out container  
The condensed water container  
should be emptied.  
Opens the door or can be used to  
cancel a program (does not stay  
pushed in).  
– PROGRAM SEQUENCE  
The program sequence indicator  
lamps show the current status of the  
drying program.  
– ON / OFF  
Turns the machine on and off or  
cancels a program. When the  
machine is turned on, the “On”  
indicator will light up if the door is  
closed. If the door is open the drum  
light, located inside the machine, will  
be on.  
– DRYING STAGE REACHED  
These indicator lamps show which  
drying stage the program has  
reached. For program stages  
“Normal” and “Extra dry” the  
indicator lamp remains at the  
“Normal” position.  
– Buzzer  
Allows the buzzer to sound as the  
drum rotates during the anti-crease  
cycle.  
PROGRAM SETTING  
– Low temp.  
Set the desired program by turning the  
knob either clockwise or  
counterclockwise.  
Lower drying temperatures for  
delicate fabrics, e.g. acrylics, nylon.  
– Start  
– COTTONS  
Starts the selected program (it does  
not stay pushed in).  
– PERMANENT PRESS  
– TIMED DRYING  
Items can be either dried for 20  
minutes (incl. a cooling-down phase)  
or cool air fluffed for 15 minutes.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before loading the dryer  
Drying tips  
The appliance must be correctly  
installed and connected before the  
first use. Please see the "Installation  
instructions".  
Knitted fabrics and flannel tend to  
shrink when washed and dried for the  
first time. Do not over dry these fabrics.  
Permanent press and delicate fabrics  
tend to crease.  
For better drying results reduce the  
load size and select the "PERMANENT  
PRESS/Hand iron" program.  
^ Check the dryer drum for any residue  
that may have deposited during the  
manufacturing process. If necessary  
clean out with a cloth.  
To prevent discoloration, do not dry  
new dark-colored fabrics with  
light-colored items.  
Before drying, check fabric care  
labels for special drying instructions.  
q = Dry with normal temperature  
r = Dry with low temperature  
(select "Low temp." option)  
Do not overload the drum!  
Overloading the dryer will result in poor  
drying and wrinkling.  
s = do not dry in tumble dryer  
Close zippers and tie up fabric belts  
and apron ties.  
If no symbol is present:  
Do not dry items that may melt or ignite  
in the dryer such as plastics, rubber or  
sneakers.  
Dry cottons and permanent press  
laundry in their corresponding  
programs.  
Dry delicate fabrics like polyester, in  
one of the "PERMANENT PRESS"  
programs.  
Wool, wool blends, linen and down  
filled items should not be machine  
dried.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the dryer  
1. Turn on the dryer and load  
the laundry  
^ Press the "On/Off" button to turn on  
the dryer.  
To prevent fabric damage, check  
that laundry will not be caught in the  
closed door.  
^ Press the "Door" button to open the  
door.  
^ Load the laundry loosely into the  
drum.  
^ Close the door with a firm swing - do  
not push it shut.  
Do not use fabric softener sheets in  
this dryer. Silicates contained in  
these sheets could cause the dryer  
to overheat.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the dryer  
2. Select a program  
3. Select the Buzzer to signal  
the end of the program  
(if desired)  
^ Press the "Buzzer" button.  
4. Select a lower temperature  
(if necessary)  
^ Turn the program selector clockwise  
or counterclockwise to the desired  
program.  
Please refer to the "Programs" chart.  
The program status will be stored for 30  
minutes in the event of a power failure.  
^ Press the "Low temp." button to  
reduce the temperature when drying  
delicate fabrics.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Programs  
Program  
COTTONS  
Extra dry  
Fabric  
Note  
For drying laundry that will be The "Extra dry" program should  
stored away, such as linens or not be selected for jersey  
seasonal clothing.  
materials. Items may shrink.  
Normal  
Normal-  
Uniform loads of cotton e.g.  
sheets, underwear, socks.  
–
Knitted cotton fabrics that may If items are still damp, redry  
shrink, e.g. jersey material or  
lightweight cottons.  
using "Normal+".  
Hand iron r  
Cotton or linen fabrics to be  
left damp for easier ironing.  
–
Hand iron rr  
If fabrics are too damp for  
ironing, redry using "Hand iron  
r".  
Machine iron Cotton or linen fabrics, which  
To prevent moisture loss, roll up  
will be ironed with a rotary iron. the laundry until ironing.  
PERMANENT PRESS  
Normal+  
Normal  
Permanent press items.  
Permanent press and blended  
fabrics made of blended  
woven or knitted fabrics, e.g.  
cotton/synthetic.  
Hand iron  
Permanent press and blended Reduce load size for fabrics that  
fabrics, requiring an ironed  
finish.  
wrinkle easily.  
TIMED DRYING  
20 mins.  
warm  
Individual items or very small  
loads.  
–
–
15 mins.  
cool air  
Individual items to be  
freshened and fluffed with cool  
air.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the dryer  
5. Start the program  
6. At the end of a program  
The "Anti-crease/Finish" indicator will  
light at the end of a program.  
^ Turn the program selector to "Finish".  
^ Press the "START" button.  
^ Press the "Door" button to open the  
door.  
^ Remove the laundry.  
^ Check that the drum is empty.  
^ Clean the lint filter before or after  
each use (see "Cleaning the lint  
filter".)  
^ Press the "On/Off" button to turn off  
the dryer.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dryer care  
Cleaning the lint filter  
Before cleaning the tumble dryer,  
disconnect the machine from the  
power supply.  
The lint filter must be cleaned before  
or after every program.  
Never use abrasive cleaners,  
scouring pads, steel wool or caustic  
(oven) cleaners on the dryer. They  
will damage the surface.  
Cleaning the exterior and the  
control panel  
^ The exterior and the control panel  
can be cleaned with warm water and  
liquid dish soap applied with a soft  
sponge.  
^ Wipe dry using a soft cloth.  
Cleaning the drum and  
stainless steel parts  
^ Open the door and remove the lint  
filter.  
^ Stainless steel surfaces can be  
cleaned using a non-abrasive  
stainless steel cleaner.  
^ Wipe the lint off the filter with your  
hand, do not use any sharp objects!  
^ Wipe dry using a soft cloth.  
^ Any lint remaining in the hollow part  
of the door can be removed through  
the gap at the bottom with a dust  
brush or vacuum.  
^ Return the lint filter and close the  
door.  
The lint filter can be rinsed with hot  
water if necessary.  
^ Dry the lint filter before putting it back  
in place.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dryer care  
Emptying the condensed water To empty the container  
container  
Depending on your type of installation,  
the condensed water will either be  
pumped to a drain, or collected in the  
condensed water container, located in  
the upper left corner of the machine.  
The container holds approximately  
1 gallon of water.  
The container should be emptied  
weekly.  
Should the container be full when the  
tumble dryer is started, or if it becomes  
full during normal operation:  
^ Pull out the container with both  
hands.  
– The “Empty out container” indicator  
will light.  
– The buzzer will sound.  
– The drying program will stop.  
– The machine will enter the cooling  
down cycle.  
^ Hold the cap open while emptying  
the container.  
^ When the container is empty, push it  
into its recess until it clicks into place.  
Do not drink the condensed water.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dryer care  
Cleaning the heat exchanger  
Disconnect the machine from the  
power supply.  
^ The heat exchanger should be  
cleaned every 6 months.  
^ Open the door.  
^ Remove the cover.  
^ Turn the lever so that it is vertical.  
^ Turn both levers, on the heat  
exchanger, so that they are vertical.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dryer care  
^ Pull out the heat exchanger.  
– and along the two long sides  
^ Clean the heat exchanger:  
^ Stand the heat exchanger lengthwise  
on a towel until it dries.  
^ Replace the heat exchanger in the  
reverse order.  
^ Make certain the heat exchanger is  
pushed in all the way and that the  
cover is firmly closed. Otherwise  
water may leak from the machine.  
– at both ends (front and back)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dryer care  
Changing the light bulb  
Power failure - Emergency  
door release  
,WARNING  
To reduce the risk of electric shock,  
disconnect this appliance from the  
power supply by unplugging or  
tripping the circuit breaker.  
^ Pull forward on the unhinged side of  
the door.  
^ Unscrew the plastic bulb cover  
located inside the drum and above  
the door (see illustration.)  
^ Replace the light bulb with a  
temperature proof bulb (part # 02  
150 900) available from Miele’s  
Technical Service Department.  
The light bulb must not exceed the  
maximum wattage quoted on the  
data plate.  
^ Refit the plastic bulb cover.  
Take care that the bulb cover is  
tightened into place. Otherwise  
moisture may penetrate the socket  
and cause a short circuit.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Quick Guide  
Remove this guide for easy reference  
Please read all  
instructions, especially  
the "Important Safety Instructions",  
before using the dryer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Quick Guide  
1. Turn on the dryer and load the  
laundry  
2. Select a program  
^ Press the "On/Off" button to turn on  
the dryer.  
^ Turn the program selector clockwise  
or counterclockwise to the desired  
program.  
3. Select the Buzzer to signal the end  
of the program (if desired)  
^ Press the "Door" button to open the  
door.  
^ Load the laundry into the drum. Make  
sure that there is enough space in the  
drum for clothes to tumble freely.  
To prevent fabric damage, check  
that laundry will not be caught in the  
closed door.  
^ Press the "Buzzer" button.  
^ Close the door with a firm swing - do  
not push it shut.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Guide  
4. Select a lower temperature  
(if necessary)  
6. At the end of a program  
The "Anti-crease / Finish" indicator will  
light.  
^ Turn the program selector to "Finish".  
^ Press the "Low temp." button to  
reduce the temperature when drying  
delicate fabrics.  
^ Press "Door" and remove the laundry.  
5. Start the program  
^ Press "START".  
^ Clean the lint filter.  
^ Press the "On/Off" button to turn off  
the dryer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Guide  
Program  
Fabric  
Note  
COTTONS  
Extra dry  
For drying laundry that will be The "Extra dry" program should  
stored away, such as linens or not be selected for jersey  
seasonal clothing.  
materials. Items may shrink.  
Normal  
Normal-  
Uniform loads of cotton e.g.  
sheets, underwear, socks.  
–
Knitted cotton fabrics that may If items are still damp, redry  
shrink, e.g. jersey material or  
lightweight cottons.  
using "Normal+".  
Hand iron r  
Cotton or linen fabrics to be  
left damp for easier ironing.  
–
Hand iron rr  
If fabrics are too damp for  
ironing, redry using "Hand iron  
r".  
Machine iron Cotton or linen fabrics, which  
To prevent moisture loss, roll up  
will be ironed with a rotary iron. the laundry until ironing.  
PERMANENT PRESS  
Normal+  
Normal  
Permanent press items.  
Permanent press and blended  
fabrics made of blended  
woven or knitted fabrics, e.g.  
cotton/synthetic.  
Hand iron  
Permanent press and blended Reduce load size for fabrics that  
fabrics, requiring an ironed  
finish.  
wrinkle easily.  
TIMED DRYING  
20 mins.  
warm  
Individual items or very small  
loads.  
–
–
15 mins.  
cool air  
Individual items to be  
freshened and fluffed with cool  
air.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
With the following guide, minor problems can be fixed without a service call.  
What if  
Possible fault  
Fix  
. . . the tumble  
dryer fails to start indicator lights up. If so,  
Check whether the "On"  
Repeat the program selection  
procedure in the correct  
when turned on? failure to start may be due sequence, see "Using the  
to an incorrect program  
selection procedure.  
dryer".  
If the "On" indicator lamp  
does not illuminate, check  
that:  
– The "ON/OFF" button is  
pressed in.  
– The door is properly closed.  
– The machine is plugged in  
and the fuse or circuit  
breaker has not tripped.  
. . . the laundry is The load consisted of  
not dry enough? dissimilar items (size and  
fabrics).  
Select a longer drying  
program.  
Small loads or individual  
items may cause the  
program to terminate  
prematurely.  
Use a timed drying program.  
The load was too large for Press the "Load size - Full"  
the "Load size - Half"  
position.  
button when drying larger  
loads.  
. . . the drying  
times are too  
long?  
The lint filter is clogged.  
Clean the lint filter in the door.  
The laundry was not spun Make sure that the laundry is  
in the washer for a  
sufficient time.  
thoroughly spun before drying.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Frequently asked questions  
What if, . . . ?  
Possible fault  
Fix  
. . . the "anti-crease"  
indicator lamp in the  
sequence indicator  
display starts flashing?  
– Turn the program  
selector to "finish".  
– Turn the machine off  
and then on again.  
– Select a program..  
– Press the "Start" button.  
If the indicator lamp starts  
flashing again, this  
indicates a fault in the  
machine.  
Please contact the Miele  
Service Dept.  
. . . the drum door opens The machine has  
during the drying cycle? overheated. The  
temperature limiter  
Before restarting the  
program, proceed as  
follows:  
opened the drum door  
and caused the machine  
to turn off automatically.  
Possible reasons for  
overheating:  
– The lint filter in the door  
is clogged.  
– The vent duct is  
– Release the ON/OFF  
button.  
– Clean the affected part  
of the machine.  
– Turn on the machine  
again.  
– Reselect the  
terminated program.  
– Press the “Start”  
blocked.  
– The vent aperture (e.g.  
louvred window vent,  
wall vent) is blocked.  
button.  
If the drum door opens  
again, the Miele Service  
Dept. should be  
contacted.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
What to do if, . . . ?  
. . . drops of water  
Cause . . .  
This may not be a  
Remedy . . .  
These two seals may  
occasionally cause  
appear along the upper problem. A dual filter  
edge of the drum door? system with two seals is  
condensed water to form  
used to prevent lint from on the door.  
becoming deposited in  
the heat exchanger.  
Laundry coming into  
contact with these drops  
of water will dry within a  
few minutes.  
. . . after cleaning the  
heat exchanger, water  
leaks from the machine?  
Check that the heat  
exchanger door has been  
replaced correctly. If  
necessary, remove and  
replace it.  
. . . the interior drum  
light fails to function?  
See "Changing the light  
bulb".  
. . . you have to open the  
door in the event of a  
power failure?  
See "Power failure –  
Emergency door release".  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales service  
In the event of a problem which you  
cannot fix yourself, or to order spare  
parts please contact:  
– Your Miele Dealer  
or  
– The Miele Technical Service  
Department  
USA 1-800-999-1360  
[email protected]  
CDN 1-800-565-6435  
[email protected]  
When contacting the Technical Service  
Department, please quote the model  
and serial number of your appliance.  
They can be found on the data plate  
located below the drum opening.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation Instructions  
To prevent accidents  
and machine damage  
read these instructions  
before  
installation or use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Installation, repair and  
If there is any doubt concerning  
installation contact Miele’s  
Technical Service Department.  
maintenance work should be  
performed by a Miele authorized  
service technician. Work by unqualified  
persons could be dangerous and could  
void the warranty.  
USA 1-800-999-1360  
[email protected]  
CDN 1-800-565-6435  
[email protected]  
Before installation, disconnect the  
tumble dryer from the electrical  
supply by unplugging the power cord  
or tripping the circuit breaker.  
GROUNDING INSTRUCTIONS  
This appliance must be grounded.  
In the event of malfunction or  
breakdown, grounding will reduce the  
risk of electric shock by providing a  
path of least resistance for electric  
current. This appliance is equipped  
with a cord having an  
equipment-grounding conductor and a  
grounding plug. The plug must be  
plugged into an appropriate outlet that  
is properly installed and grounded in  
accordance with all local codes and  
ordinances.  
WARNING – Improper connection  
of the equipment-grounding  
conductor can result in a risk of electric  
shock. Check with a qualified  
electrician or service representative or  
personnel if you are in doubt as to  
whether the appliance is properly  
grounded.  
Do not modify the plug provided  
with the appliance: if it will not fit  
the outlet, have a proper outlet installed  
by a qualified electrician.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
INSTALLATION INSTRUCTIONS  
Disposal of the packing  
materials  
Disposal of an old appliance  
Old appliances may contain materials  
that can be recycled. Please contact  
your local recycling authority about the  
possibility of recycling these materials.  
The cardboard box and packing  
materials protect the appliance during  
shipping. They have been designed to  
be biodegradable and recyclable.  
Ensure that the appliance presents no  
danger to children while being stored  
for disposal. Before discarding an old  
appliance, unplug it from the outlet and  
cut off its power cord and remove any  
doors to prevent hazards.  
To prevent suffocation ensure that any  
plastic wrappings, bags etc. are  
disposed of safely and kept out of the  
reach of children.  
Please recycle.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Leveling the dryer  
Installation site  
An air flow gap of 3/8 " (10 mm) must  
be provided between the machine  
and the floor. This air flow gap must  
not be blocked by a toekick or thick-  
piled carpets.  
It is possible to install this appliance  
under a continuous countertop. The  
machine lid can be removed, if  
necessary.  
The tumble dryer can also be placed  
on top of a Miele washing machine for a  
stacked installation. An appropriate  
stacking kit is required.  
The stacking kit, part # 12 996 026, is  
available from your Miele dealer or the  
Miele Technical Service Department.  
The machine should be perfectly level  
to ensure safe and proper operation.  
Minor discrepancies do not, however,  
have an adverse effect on operation.  
^ The machine can be leveled by  
turning the legs clockwise or  
counterclockwise as necessary.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Changing the decor panel  
Fitting a toekick panel  
The appliance toekick below the door  
can be concealed using a toekick  
panel.  
Note: The door should be closed  
when installing the decor panel.  
^ On the door lock side remove the  
4 screws (3 on the side and 1  
underneath) and the door strip.  
The height and depth of the appliance  
toekick cannot be altered.  
A cut-out must be made in the toekick  
panel around the ventilation slots. If the  
ventilation slots are blocked the  
^ Loosen the remaining 7 screws on  
the lower and side decor strips until  
the decor panel can be bowed  
slightly and taken out.  
machine will not dry efficiently.  
^ Insert the new panel.  
^ Reassemble in the reverse order and  
tighten the screws.  
Decor panel dimensions  
Width:  
Height:  
Thickness:  
23 11  
/
16  
23 1/8  
1
/
16  
Panels between 1/16 and 1/8 thick  
require an adapter strip available from  
the Technical Service Department.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Connecting to an external  
drain  
The condensed water can be sent  
directly to a drain if the machine is  
installed near a sink or standpipe.  
The machine is equipped with a non-  
return valve that will prevent water from  
flowing back into the machine if there is  
a problem in the drainage system.  
Max. drain hose length: 10 ft  
Max. drain height: 4 ft.  
Supplied accessories:  
- 6 ft drain hose  
- Hose clamp  
^ Remove the clamp from the plug and  
place it over the drain hose.  
- Hose elbow  
^ Push the drain hose onto the drain  
outlet. Make sure that the hose is not  
kinked and firmly secured by the  
hose clamp.  
To make a direct drain connection,  
proceed as follows:  
^ Loosen the hose clamp at the drain  
outlet at the rear lower left of the  
machine and remove the rubber  
plug.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
^ Close the water inlet port above the  
condensed water container with the  
bottom part of the rubber plug. The  
plug must face towards the interior of  
the machine so that the condensed  
water container can be easily  
inserted.  
^ Attach the elbow to the hose and  
secure it to the sink or into the drain  
pipe. If room is available, it can be  
inserted into the stand pipe used by  
the washing machine.  
The water will now be drained  
automatically and the container will not  
need to be emptied.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Make the electrical connection Electrical connection  
The dryer comes with a 5 ft long, 12/4  
AWG cord and a NEMA 14-30 P plug.  
GROUNDING INSTRUCTIONS  
This appliance must be grounded. In  
the event of malfunction or  
breakdown, grounding will reduce  
the risk of electric shock by  
providing a path of least resistance  
for electric current. This appliance is  
equipped with a cord having an  
equipment grounding conductor and  
a grounding plug. The plug must be  
plugged into an appropriate outlet  
that is properly installed and  
It should be connected to a  
120/208-240 V, 15 A, 60 Hz AC power  
supply. A 3 pole-4 wire grounding  
power outlet (NEMA type 14-30 R) is  
necessary.  
EASY INSTALLATION KIT  
If you do not have a dedicated 15 Amp  
line for this appliance, but you have the  
standard, 120/208-240 V - 30 Amp,  
60 Hz AC outlet, you can use the "Easy  
Installation Kit", which allows you to use  
that line to connect this appliance.  
grounded in accordance with all  
local codes and ordinances.  
WARNING – Improper connection of  
the equipment grounding conductor  
can result in a risk of electric shock.  
Check with a qualified electrician or  
service representative or personnel  
if you are in doubt as to whether the  
appliance is properly grounded.  
057B for on-site outlet NEMA 10-30 R  
060B for on-site outlet NEMA 14-30 R  
For more information on the "Easy  
Installation Kit" or if you have questions  
concerning the electrical connection  
please contact:  
USA 1-800-999-1360  
[email protected]  
Do not modify the plug provided with  
the appliance: if it will not fit the  
outlet, have a proper outlet installed  
by a qualified electrician.  
CDN 1-800-565-6435  
[email protected]  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
All rights reserved / 4503  
M.-Nr. 03 719 550 / 04  
For the most updated manual check the Miele website.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Clothes Dryer T 4222 C User Manual
Multiquip Cordless Sander EHTX44Y5 User Manual
Niles Audio Radio GXR2 User Manual
Nilfisk ALTO Pressure Washer 7 FA User Manual
Omron Healthcare Blood Pressure Monitor HEM 7211 E User Manual
Optimus Electronic Keyboard MD 1150 User Manual
Oregon Scientific Fitness Electronics PE316PM User Manual
Oregon Scientific Radar Detector BAR933HG User Manual
Oregon Scientific Weather Radio BA900 User Manual
Oster Blender 120761 100 User Manual