Midland Radio Portable Radio WR 301 User Manual

All Hazards Weather  
Alert Radio  
WR-300/301  
Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Table of Contents  
Quick Start Guide  
2
Table of Contents  
3
Product Information  
4
WR-300/301 Controls  
Icons on the Display  
5
5
WR-300/301 Accessory Jacks  
Set the Time  
5
6
Set the Date  
6
Set the ALARM Time  
6
Choosing an Alarm Type  
Programming Notes  
6
7
Getting your S.A.M.E. County Codes  
Programming S.A.M.E. County Codes  
Helpful Tip  
7
8
8
All S.A.M.E. County Code  
A Single S.A.M.E. County Code  
Multiple S.A.M.E. County Code  
Reviewing Stored S.A.M.E. Codes  
Choosing an Alert Type(Voice or Siren)  
To Turn the Alert ON and OFF  
Setting the Alert Volume  
Selectable Alert Option  
Testing the Alert  
8
8
8
9
9
9
9
9
10  
10  
10  
10  
11  
11  
11  
11  
12  
13  
14  
15  
16  
16  
17  
18  
19  
20  
21  
Reviewing the Alert  
Test Signals Broadcast by NWS  
No Reception Warning  
AM/FM Radio  
Turning the AM/FM Radio On  
Changing the AM/FM Stations  
AM/FM Memory Channels  
Troubleshooting  
Reception  
About NOAA,NWS,&S.A.M.E.County Codes  
S.A.M.E. County Code Record  
Specification  
FCC Compliance Specification  
Warranty Info  
Service  
Accessories  
Accessories Order Form  
Other Midland Products  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Product Information:  
Thank you for choosing Midland! Your new WR-300/301 weather radio is the latest in  
weather and hazard alert monitoring technology, providing you with the information needed to  
keep you safe. Your WR-300/301 weather radio has a special receiver that tunes to the 24/7  
broadcast issued by the National Weather Service. The combined All Hazards/Weather Alert  
broadcast network is the single, most immediate source for comprehensive weather and emer-  
gency information available to the public.  
This WR-300/301 weather radio has an innovative automatic alert system. In the event of  
a special warning broadcast, the radio is automatically activated along with a loud tone, a flash-  
ing LED indicator and an “alert” message on the LCD. Emergency weather bulletins include  
alerts about: tornadoes, hurricanes, floods, ice/snow storms and other severe weather. Other  
emergencies might include: Amber alert, hazardous explosions, fires, chemical spills and other  
civil emergencies.  
In addition, this WR-300/301 weather radio has the “S.A.M.E. Digital Weather/Hazard  
Alert” feature, providing you with constant monitoring of your localized NWS broadcast. The  
S.A.M.E. decoding receiver allows you to hear only messages for the area(s) concerning you.  
You now have a choice as to what information will be brought to you.  
We encourage you to read this owner’s manual thoroughly before operating this  
radio. This manual is a valuable part of your new weather radio. See the “Quick Start  
Instructions” section of this manual for the initial weather radio setup and programming.  
After your new weather radio is programmed and operating properly, store the manual in  
a safe place for future reference.  
Page 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
WR-300/301 Controls:  
Weather/ Hazard  
On/OFF Button  
AM/FM  
Button  
Alert  
On/OFF  
Snooze  
Radio Button  
Warning Light-  
Alarm Clock  
Red  
On/Off Switch  
Watch Light-  
Orange  
Programming  
(Arrow)  
Buttons  
Advisory  
Light- Yellow  
Power On/Off  
and Volume  
Select Button  
Menu Button  
ICONS on the Display  
Alphanumeric  
Message  
Time Indicator  
Clock Alarm  
County Code  
Indicator  
Weather  
Channel  
Indicator  
Alert Type  
Indicator  
Low Battery  
indicator  
LCD Backlighting  
Press and release any button to turn the backlight on for 5 seconds. For continuous backlight,  
press the “MENU” button, then the press the “DOWN” arrow until “LIGHT” displays on the  
screen. Then press the “SELECT” button. Then press the “UP” arrow to change the backlight  
setting from “NORMAL” to “CONTINUOUS”. Press the “SELECT” button to save your settings.  
WR-300/301 Accessory Jacks  
External  
Antenna  
DC Jack  
Connector  
Programming  
Cable Port  
Earphone  
Jack  
External  
Alert Jack  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Setting the AM /FM Clock Radio Functions:  
Set the Time:  
(A). Turn on the weather radio with power/volume wheel on side of the radio.  
(B). Press the “MENU” button.  
(C). Press the “DOWN” arrow button until “SET UP TIME” is displayed.  
(D). Press the “SELECT” button, hour setting will begin to flash.  
(E). Press the “UP” button to adjust the hour setting. (Note: the am/ pm setting cannot be  
manually changed; it changes automatically as you scroll through the hours.)  
(F). Press the “RIGHT” arrow to adjust minutes and save your hour setting.  
(G). Press the “UP” button to adjust the minute setting.  
(H). Press the “SELECT” button to store the time setting.  
(I). Press the “MENU” button to return to the main menu.  
Set the DATE:  
(A). Turn on the weather radio with power/volume wheel on side of the radio.  
(B). Press the “MENU” button.  
(C). Press the “DOWN” arrow until “SET UP DATE” is displayed.  
(D). Press the “SELECT” button.  
(E). Press the “UP” arrow to adjust the day.  
(F). Press the “RIGHT” arrow to select the month.  
(G). Press the “UP” arrow to adjust the month.  
(H). Press the “RIGHT” arrow to select the year.  
(I). Press the “UP” arrow to adjust the Year.  
(J). Press the “SELECT” button to store DAY/MONTH/YEAR.  
K). Press the “MENU” button to return to the main menu.  
Set the ALARM Time (for the AM/FM Clock Radio)  
(A). Turn on the weather radio with power/volume wheel on side of the radio.  
(B). Press the “MENU” button.  
(C). Press the “DOWN” arrow until “SET UP ALARM” is displayed .  
(D). Press the “SELECT” button. The alarm hour setting will begin to flash.  
(E). Press the “UP” arrow to adjust the alarm hour setting. (Note: the AM/ PM setting  
cannot be manually changed; it changes automatically as you scroll through the hours.)  
(F). Press the “RIGHT” arrow to choose setting alarm minutes.  
(G). Press the “UP” arrow to adjust the alarm minute setting.  
To Choose the Type of Alarm:  
(A). Press the “MENU” button.  
(B). Use the “UP” arrow to choose radio or sound for clock alarm. (The icons are  
located below the clock display.)  
(C). Press the “SELECT” button to store the type of alarm setting.  
(D). To activate the alarm, set the “ALARM OFF/ON” switch to the “ON” position.  
The clock face icon will appear.  
(E). The “SNOOZE” button on the top of the WR-300/301 is for advancing the alarm time  
by 9 minutes each time the alarm sounds. The “SNZ” icon will be displayed.  
(F). Turn the alarm off with the ”ALARM OFF/ON” switch on side of the radio.  
(G). Press the “UP” arrow to adjust the alarm minute setting.  
Page 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Programming Notes:  
*Your WR-300/301 can be programmed with up to 23 different S.A.M.E. codes for your county  
and the surrounding counties of your choice. This ensures you receive alerts for only those coun-  
ties concerning you.  
* Please note: Embedded in an alert message is the amount of time for which the alert is active.  
The WR-300/301 will continue to display the alert until the expiration time. Ex: END 12-55P indi-  
cates the event ends at 12:55 PM.  
Getting your S.A.M.E. County Codes:  
A. First, determine the counties you are interested in. Then, do one of the following  
three steps to get the codes:  
1. The National Weather Service Toll-Free Number provides S.A.M.E. County  
Codes at:1-888-NWS-S.A.M.E. (1-888-697-7263)  
This is what to expect when you call the NWS number. When you call the NWS  
toll-free number, automated instructions will guide you to the S.A.M.E. County  
Code(s) you need. The number will be six digits long.  
•You will hear “Welcome to the National Weather Service. You have reached  
the Specific Area Message Encoding Program Service.”  
• If you select “touch tone” to make your entries, you will be prompted to enter  
the name of your state using the telephone keypad.  
• Next you will be prompted to enter your county name.  
• Then you will hear, “Your geographic code is XXXXXX”. (This is your  
S.A.M.E. County Code.  
2. The Internet Web Site of National Weather Service-  
When you pull up this URL, you will see a list of states .  
• Click on your state.  
• Find your county, and record the S.A.M.E. number listed next to your county.  
• Click on the weather radio link at the top of the page.  
• At the top of the weather radio page will be a link to the NWS list of states  
and corresponding county codes. Click on this link.  
• Click on your state and a list of counties and codes will be listed. Find your  
county and then find your code.  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Programming S.A.M.E. County Codes into the WR-300/301  
Helpful Tip: The S.A.M.E. code is created using the following method:  
• The first digit is the subcounty code-currently 0 in most areas.  
• The second two digits represent the state code.  
• The last three digits represent the county code.  
“ALL” S.A.M.E. County Codes is the Factory Setting:  
Your WR-300/301 weather radio is preprogrammed to receive NWS weather and hazard alert  
transmissions for all S.A.M.E. county codes within range. If this is what you want, leave the  
radio set to “ALL”.  
A Single S.A.M.E. County Code:  
Press the “MENU” button to open menu options.  
• Press the “UP” arrow to scroll through menu options until “County Code” is  
displayed.  
• Press the “SELECT” button and then the “UP” arrow to scroll through ”SINGLE”, “MUL-  
TIPLE” or “ALL”.  
• Display “SINGLE”, then press the “SELECT” button.  
• “Code 01” will be displayed. Press the “SELECT” button to program this code. The first  
digit space will start blinking.  
• Use the “UP” arrow to scroll through the digits 0-9. Input the first digit then  
press the “RIGHT” arrow to save that selection and move to the next digit.  
• Continue programming all 6 digits in this way. When finished, press the “SELECT” button  
and your entered code will be saved.  
Multiple S.A.M.E. County Codes:  
Press the “MENU” button to open menu options.  
• Press the “UP” arrow to scroll through menu options until “County Code” is  
displayed.  
• Press the “SELECT” button and then the “UP” arrow to scroll through “SINGLE”, “MUL-  
TIPLE” or “ALL”.  
• Display “MULTIPLE”, then press “SELECT”.  
• Use the “UP” arrow to scroll through code locations 1-23. You are able to  
program up to 23 different county codes into your WR-300/301 weather radio.  
• Display the location you want then press the “SELECT” button. The first  
digit space will start blinking.  
• Use the “UP” arrow to scroll through the digits 0-9. Input the first digit then  
press the “RIGHT” arrow to save that selection and move to the next digit.  
• Continue programming all 6 digits in this way. When finished, press the “SELECT” button  
and your entered code will be saved.  
To program your next code, press the “UP” arrow to go to the next code loca-  
tion.  
• When you have entered all your desired codes, press the “MENU” button to store your  
settings.  
Page 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Reviewing Stored S.A.M.E. Codes  
To review your saved S.A.M.E. codes, do the following:  
• Press the “MENU” button.  
• Press the “UP” arrow until “COUNTY CODE” is displayed on the screen.  
• Press “SELECT”  
• Use the “UP” arrow to scroll through the S.A.M.E. memory code locations.  
• All empty memory locations will appear as “------”.  
• Press the “MENU” button when finished reviewing the S.A.M.E. codes.  
Choosing an Alert Type (Voice or Siren):  
1. Press the “MENU” button to open menu options.  
2. Press the “UP” arrow until Alert Mode is displayed on the screen. Press the “SELECT”  
button and “VOICE” will start blinking.  
3. If you want the voice alert, press the “SELECT” button.  
4. If “VOICE” is chosen, the alert would sound for 8 seconds followed by 5  
minutes of weather broadcast.  
5. If you want the siren alert, press the “UP” arrow until “SIREN” is displayed,  
then press the “SELECT” button to save your setting.  
6. If “SIREN” is chosen, alert tones will sound for 5 minutes or until the “ALERT  
ON/OFF” button is pressed.  
To Turn the Alert ON and OFF:  
To turn the alert on and off, press and hold the “ALERT ON/OFF” button for 5 seconds until  
you see “ALERT ON” blinking. While still holding down the button, press the “UP” arrow to  
switch between “ALERT ON” and “ALERT OFF”. Press the “SELECT” button to save your  
selection.  
Setting the Alert Volume:  
To set the alert volume, press the “MENU” button.  
• Press the “UP” arrow until “SIREN LEVEL” is displayed.  
• Press the “SELECT” button and “LEVEL HIGH” or “LEVEL LO” will start blinking.  
• Then press the “UP” arrow to choose “LEVEL HI” or “LEVEL LO” volume.  
• Press the “SELECT” button to save your setting.  
Selectable Alert Option:  
You can program the WR-300/301 weather radio to only sound the voice or siren alert for cer-  
tain weather emergency messages. Those messages unimportant to you can be programmed  
to only display a message, minimizing annoyance.  
To program the emergeny messages you want to silence, do the following:  
Press the “MENU” button until “DEFEAT SIREN” is displayed. Press the “SELECT”button.  
Using the “UP” arrow, scroll through the different alerts you may want to silence.  
When you have selected one, press the “RIGHT” arrow to change the status of the event  
from “ALERT ENABLE” to “ALERT DISABLE”.  
Press the “MENU” button to save your selection and exit the programming option.  
Page 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300 Owner’s Manual  
Selectable Alert Reference Chart  
Page 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300 Owner’s Manual  
Page 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300 Owner’s Manual  
The above event codes notated with an asterick have a default setting to not sound the  
siren but ONLY display a message and light the yellow LED when received. This is not an  
indication the radio is not working properly, but the intended functionality. All other alerts are  
defaulted to sound the siren and display the alert message. You may reprogram the default  
setting of the above advisories and most other alerts by following the instructions on page 9.  
Page 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Testing the Alert:  
To test the alert function to ensure it is working, press the “MENU” button, then press the  
“UP” arrow until “SIREN TEST” is displayed. Press the “SELECT” button to sound the alert  
siren. Press the “SELECT” button again to silence the alarm.  
Reviewing Alerts:  
The WR-300/301 weather radio can store 10 different alerts (with overlapping effective times)  
in its memory. If the radio receives a new alert while a previous alert is still in effect, it auto-  
matically displays the new alert description. To review past alerts that are still in effect, press  
the “DOWN” arrow to scroll through the last 10 alerts. If an alert is expired, it will be marked  
“EXP”.  
Test Signals Broadcast by NWS:  
All National Weather Service stations periodically transmit test signals. You can find out when  
your local NWS station broadcasts test signals by calling the NOAA National Weather Service  
Forecast Office (listed under “Weather” in the Federal Government section of the telephone  
book.)  
During the weekly test signal, the local NWS station will give a list of counties covered by  
their transmitter. The NWS test signal allows everyone with weather radio receivers to verify  
the operation of their equipment.  
The following test signals may be sent by the NWS during testing: required weekly test,  
required monthly test, system demo, and national periodic test.  
No Reception Warning:  
If no alerts are received for 10 days, the display will flash “CHECK RECEPTION” every 30  
seconds. If this happens, check your channel settings and county codes for setting errors. If  
you receive a clear signal from the NWS, try using the “ALL” county code setting to receive  
all alerts for all counties.  
Note: If you have trouble finding reception, please move your radio closer to a window and  
away from fluorescent lighting.  
Page 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
AM/FM Radio:  
There is an AM/FM radio built into the WR-300/301 weather radio that you can listen to without  
interrupting the weather radio functions. If an alert is received, the radio automatically switches  
from the AM/FM radio to the weather radio alert.  
Turning the AM/FM Radio On: Press the “RADIO” button to turn the AM/FM radio on and  
off.  
Changing AM/FM Stations: Press the “RIGHT” arrow or “LEFT” arrow to scan through the  
radio stations. When you find a station you like, stop pressing the arrow and the radio will  
stay on that station.  
AM/FM Memory Channels: You can program 3 AM and 3 FM radio stations into the radio’s  
memory. To program a memory channel, do the following:  
• Turn the AM/FM radio on and use the “LEFT” or “RIGHT” arrow to tune to the desired  
station.  
• Press the “MENU” button. The “MEMORY” number will flash on the display.  
• Use the “UP” or “DOWN” arrow to choose the desired memory channel you wish to prog-  
ram.  
• Press the “SELECT” button to save your frequency selection to the chosen memory chan-  
nel.  
Page 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Troubleshooting:  
Problem  
Suggestion  
Make sure the AC Power Adapter is  
securely plugged into both DC jack on back  
of weather radio and into wall outlet. Make  
sure batteries are installed in case AC  
power fails.  
No power  
No sound  
Check VOLUME control to ensure volume  
is turned up to an audible level.  
Ensure that telescoping antenna is up and  
fully extended.  
If you are using an external antenna,  
ensure that it is connected properly.  
Ensure that the radio is set to the NWS  
weather channel in use in your area.  
No weather broadcast when you press  
WEATHER/ SNOOZE button  
Contact NWS to ensure they are presently  
broadcasting.  
If in a metal structure, make sure you are  
close to a window.  
If in a weak signal area, you will need an  
external antenna.  
Check to see that you have programmed in  
the correct S.A.M.E. County Code(s).  
The radio is not responding properly to  
NWS weather alert broadcasts  
Check with the NWS that the tower is  
broadcasting.  
Page 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
,
Reception:  
The National Weather Service operates a system of weather and hazard alert broadcasts cov-  
ering a large area of the United States. Currently, only a few areas are not covered. Typical  
broadcasts are within reception distance of 25-50 miles of the weather station. Your WR-  
300/301 weather radio can receive broadcasts from up to 50 miles from the weather station,  
depending on your location and conditions of weather, terrain, etc. If you find reception is not  
good in your area, try different locations in your home or office to find a spot of improved  
reception. Placement near a window usually improves reception.  
If a weather broadcast cannot be heard on any of the 7 channels, contact your local  
NWS office and verify the closest station is on air. Also verify the channel frequencies the sta-  
tion is broadcasting. If your NWS is transmitting and you are not receiving the broadcasts,  
view our suggested antenna, the 18-259W VHF Through-Glass Antenna. This antenna  
improves reception when applied to a window.  
Please note: Metal structures are more difficult to receive reception in, because metal inter-  
feres with the signal. If you live in a metal structure, you may need an external antenna.  
Page 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
About NOAA, NWS, & S.A.M.E. County Codes  
In 1994, NOAA began broadcasting coded emergency signals that identify the specific geo-  
graphic area (such as the county within a state) that is affected by an emergency. Until that  
time, such specific emergency weather information was not available directly to the public.  
NOAA transmits the coded emergency signals using a technique called Specific Area  
Message Encoding (S.A.M.E.) The WR-300/301 weather radio is designed to receive these  
S.A.M.E. county code transmissions.  
The National Weather service divides the United States by state and county (or parish)  
and assigns a six digit code number called a FIPS (Federal Information Processing System)  
code, also known as a S.A.M.E. county code.  
You can program the weather radio with up to 23 S.A.M.E. county codes. The weather radio  
allows you to receive broadcast alerts for either your own county, or for up to 23 counties.  
This will eliminate any alerts that are not within your area of interest.  
When you program your S.A.M.E. county code(s) into the WR-300/301 weather radio,  
you eliminate any alerts that are not within those counties. Warnings, watches and advi-  
sories of weather and other area emergencies, about 50 different types, will activate the  
weather radio for only your programmed specific area.  
The S.A.M.E. message the NWS sends contains information pertaining to the period for  
which the alert is valid. NWS can set the active time of the alert from 15 minutes up to 6  
hours. When the designated time has passed, the weather radio display message and light  
will automatically reset to their normal appearance.  
Page 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
S.A.M.E. County Code Record:  
County Name  
S.A.M.E. County Code  
NWS Channel  
Page 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Specifications:  
Specifications are nominal and subject to change.  
General  
Frequency Range  
(162.40, 162.425, 162.45, 162.475, 162.50, 162.525,  
162.55 MHz)  
Number of WX Channels  
Input Voltage  
7
9-14 Volts DC  
7.0x5.5x2.25  
0.5 uV  
Dimensions  
20 dB Quieting Sensitivity  
FIPS County code Sensitivity at5kHz Dev  
Channel Selectivity  
0.5uV  
±25kHz, 60dB  
8 ohms  
Speaker Impedance  
Speaker Output at10%THD  
200 mW max.  
FCC Compliance Information:  
MIDLAND (NOAA) Weather Radio Model WR-300/301, “S.A.M.E. Digital Weather/Hazard  
Alert Radio”. This device complies with part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference; (2) This device  
must accept any interference received including interference that may cause undesired oper-  
ation.  
Page 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
One Year Limited Warranty:  
MIDLAND Radio Corporation will repair or replace, at its option without charge, your WR-  
300/301 weather radio which fails due to a defect in material or workmanship within one year  
following the initial consumer purchase.  
This warranty does not include any antennas, which may be a part of or included with the  
warranted product, or the cost of labor for removal or re-installation of the product in a vehi-  
cle or other mounting.  
Performance of any obligation under this warranty may be obtained by returning the warrant-  
ed product, freight prepaid, along with a copy of the original sales receipt to Midland Radio  
Corporation at the address provided below.  
This warranty gives you specific legal rights, and you may also have other rights, which vary,  
from state to state.  
Note: The above warranty applies only to merchandise purchased in the United States of  
America or any of the territories or possessions thereof, or from a U.S. Military exchange.  
For warranty coverage on merchandise purchased elsewhere, ask your dealer.  
Midland Radio Corporation  
Warranty Service Department  
5900 Parretta Drive  
Kansas City, Missouri 64120  
Phone: (816) 241-8500  
Fax: (816) 241-5713  
Page 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Service:  
If your MIDLAND Weather Radio fails to operate properly, check the “Troubleshooting” section  
in this manual before returning it for service. If necessary, return as follows:  
1. Pack the unit in its original box and packing. Then pack the original box in a  
suitable shipping carton. Caution: Improper packing may result in damage  
during shipment.  
2. Include the following:  
a. full description of any problems  
b. money order for $7.50 to cover shipping and handling (this may not be  
required in some states)  
c. daytime telephone number, name & address  
3. For warranty service include a photocopy of the bill of sale from an authorized dealer  
or other proof of purchase showing the date of sale.  
4. You do not need to return accessory items (AC/DC Adapter, batteries, Owners Guide)  
unless they might be directly related to the problem.  
5. A flat rate of $45.00 will apply to repairs not covered by warranty or units  
that are over one year old. Send only cashier’s check, money order or  
Master Card or Visa card number.  
Page 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Accessories  
Accessories can be purchased at www.midlandradio.com or fill in the form on the following  
page and mail to our address.  
18-STR  
External Alert Strobe Light  
-Easy Connection  
-High Strobe Visibility  
- $19.99  
18-259W  
Window Mount All Hazard/  
Weather Alert Radio Antenna  
-Improves Range and  
Reception  
-17-7 Stainless Steel Rod  
- $21.99  
Page 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WR-300/301 Owner’s Manual  
Page 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Midland Radio Corporation  
5900 Parretta Drive  
Kansas City, MO 64120  
816.241.8500  
Note: Features amd Specifications are subject to change without notice. MIDLAND is not respon-  
sible for unintentional errors or omissions on its packaging.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KVH Industries Boating Equipment 01 0148 User Manual
Land Pride Lawn Mower Z52 User Manual
Lathem Time Clock LTR RSS User Manual
Lenovo Server 387 User Manual
Life Fitness Elliptical Trainer 90XW 0XXX 02 User Manual
Life Fitness Home Gym SU65 User Manual
Makita Drill HP2070 User Manual
Ma Labs Computer Monitor L1730S User Manual
Mantis Tiller 7252 User Manual
Metra Electronics Car Stereo System 99 7310 User Manual