MicroBoards Technology CD Player CWR 424 52 User Manual

CWR-424-52  
CD Duplicator  
USER’S MANUAL  
Version 2.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CWR-424-52  
Microboards Technology LLC  
System Overview  
The CWR-424-52 is a professional, high-speed CD recordable duplicator engineered for the rackmount  
environment. Microboards Technology has applied their expertise in tower CD duplication to develop this  
sleek, black rackmount system to meet the demands of the Pro Audio user and information systems  
professional alike. The CWR-424-52 automatically detects the format of the master CD and the four  
recorders write at a blazing 52x speed to allow for high volume duplication. Features of the CWR-424-52  
include a recording simulation mode to ensure your master can be copied safely. A simple, two-button  
interface allows the recording speed to be adjusted to slower speeds for use with media not certified for  
high-speed duplication. Taiyo Yuden media is suggested for high-speed 52x duplication.  
Advanced Features:  
4 (52x) CD recorders for high output  
One touch start for CD to CD duplication  
Selectable recording speeds up to 52x for recording stability  
Easy to read LED interface for copy status and error reporting  
Simulation mode to ensure recording stability  
Black 4U rackmount enclosure for aesthetic integration with current equipment  
Updates easily installed through CD reader  
Unpacking your system  
When unpacking your duplicator, confirm the following items are included:  
CWR-424-52 duplicator  
Power cable  
Quick Start Guide  
Microboards Documentation CD  
Blank CD-R media  
If any of these items are missing, please contact your distributor or Microboards Technology Technical  
Support at 952-556-1639.  
IMPORTANT: Please keep all the packing for your CWR-424-52 duplicator. If your unit ever needs to be  
sent in for service, it must be returned in the original packing or the warranty will be voided.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CWR-424-52  
Microboards Technology LLC  
Setting up the CWR-424-52 duplicator  
Set up the CWR-424-52 duplicator with the following conditions:  
19” Rack mount position or  
On a level and stable surface  
In a well ventilated location  
Temperature and humidity:  
o Temperature: 5-40° C  
o Humidity: 20-80%RH (no dew formation)  
Do not locate the CWR-424-52 duplicator:  
Under direct sunlight (If the machine is exposed to sunlight, the light should be blocked by  
a curtain or blind.)  
In a place where there is a lot of vibration  
Near open flame  
In a place where the temperature and humidity change drastically  
Near a heating device such as a heater or furnace  
In a location where air from an air conditioner blows directly onto the unit  
Near a container filled with water such as a vase  
In a dusty location  
o Dust and dirt can decrease the productivity of the duplicator dramatically. It is very  
important to keep the system in a clean and dust free environment.  
In winter during times of low humidity or in a location where static electricity is  
generated, use an anti-static-electricity mat or humidifier to prevent static electricity.  
Copy Process  
The advantage of the CWR-424-52 is the quick and easy operation to burn CD information.  
You can burn CD-R’s by pressing the button only once with the CWR-424-52 as follows;  
Turn on CWR-424-52, and it begins to initialize.  
o The LED’s turn on, one at a time and then go off, leaving the 1st mode light on.  
o Insert a Master disc into the Master drive and blank discs into writers.  
o Wait for ten seconds until the drives are ready.  
o Press the ‘START’ button (press it once).  
o The copy process begins.  
Refer to the “LED’s Status” and “Copy Mode Process” sections for details.  
Using Audio Masters:  
When copying Audio masters with a large number of tracks, the system can take 3 to 5 minutes to  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CWR-424-52  
Microboards Technology LLC  
analyze the master. The reader drive will blink slowly during this process.  
Write Speeds:  
FAST – It copies at maximum speed of 52x*.  
Status  
Mode  
Mode Star  
MEDIUM – It copies at 40x*.  
Status  
Mode  
Mode Star  
t
SLOW - It copies at 8x*.  
Mode  
Status  
Mode Start  
*See table below for record speed limitations  
Speed Table  
CD-ROM Mode 1  
Fast = 52x  
Medium = 40x  
Slow = 8x  
CD-DA Audio  
CD-ROM XA  
Fast = 40x  
Medium = 24x  
Slow = 8x  
CD to CD Copy  
Fast = 52x  
Medium = 40x  
Slow = 8x  
CD-ROM XA format includes CD ROM XA Form1 and Form 2, CD Extra, Video CD  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CWR-424-52  
Microboards Technology LLC  
Copy Job Completes  
The CWR-424-52 automatically ejects the drive trays after the copy finishes successfully.  
The Master disc does not eject. You can use any or all of the four recorders to make copies.  
The CWR-424-52 ALARMS (beeps) when an error occurs with the media and/or drive.  
Discs will not be ejected and the error alarm beeps until you press the open tray button on the  
drive(s) that have failed. The drives that record correctly will eject the disc when completed.  
The display will show the error code. Once the trays are opened manually after the error, the  
error code is cleared.  
Changing Process Mode  
CWR-424-52 has two process modes.  
1) “Copy” mode: Copies the data from the Master CD to the blank CD-R disc(s).  
Refer to the “Copy Process” section (page 4) for operations.  
2) “Test copy” mode: Simulates copying the data from the Master CD to the blank disc(s). No  
data is actually written to the CD-R media. After the “test copy” has completed, the system  
returns to “Copy” mode.  
How to change the process mode:  
Press the start button  
1) “Actual copy” with single “short beep”.  
Press the Start button and after one beep release the button.  
The unit will start the copy process. Status LED solid.  
2) “Test-copy” with two “short beeps”.  
Hold down the Start button until the system beeps twice.  
There will be a single beep, a pause, then 2 beeps. Release  
the Start button after the 2 beeps and the system will start the  
test copy. Status LED blinks.  
Holding down the Start button until the system beeps a single  
time again, will put the system back in “Copy” mode .  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CWR-424-52  
Microboards Technology LLC  
Meaning of LED’s  
Listed below are the different states of the Status LED’s These indicate the status of the  
CWR-424-52 system.  
Light off  
Slow blink  
Light on  
Quick blink  
Copy Mode Process  
1.  
Mode  
Mode  
Mode  
Status  
Ready to copy (Fast Speed).  
2.  
Copying process is between 0%~30% complete.  
Status  
3.  
Copying process is between 31%~60%  
complete.  
Status  
4.  
Copying process is between 61%~100%  
complete.  
Mode  
Mode  
Status  
5.  
A single “short beep” indicates the copying  
process is complete. It returns to the display 1.,  
after ten seconds.  
Status  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CWR-424-52  
Microboards Technology LLC  
Error Display during Copying  
1.  
2.  
A repeating “long beep”, indicates an error  
reading the Master disc. The Master disc is  
unreadable. Try using another master disc.  
Status  
Status  
Mode  
Mode  
A repeating “long beep”, indicates the CD-R disc  
in the recorder drive is not blank. Try using a  
different blank disc.  
3.  
4.  
5.  
A repeating “long beep”, indicates an error  
reading the master disc or a write error writing to  
the CD-R media. Try using a different blank disc  
or different master disc.  
Mode  
Mode  
Mode  
Status  
Status  
A repeating “long beep”, indicates a write error.  
Writing to the CD-R disc failed. Try using another  
blank disc.  
A repeating “long beep”, indicates a write error.  
Writing to the CD-R disc failed due to a buffer  
underrun. Try using a different master disc. The  
reader drive could also be the cause of the error.  
Status  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CWR-424-52  
Microboards Technology LLC  
Test Copy Mode Process  
1.  
Test copying process between 0%~30%  
complete (fast speed).  
Mode  
Status  
Status  
2.  
3.  
4.  
Test copying process between 31%~60%  
complete.  
Mode  
Test copying process between 61%~100%  
complete.  
Status  
Status  
Mode  
Mode  
Test copy complete. A single “short beep”  
indicates the test is complete. The controller  
returns to the status shown in figure 1 on page 7.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CWR-424-52  
Microboards Technology LLC  
Error Display during Test Copying  
1.  
A repeating “long beep”, indicates an error  
reading the master disc. Try using another  
master disc.  
Status  
Mode  
2.  
A repeating “long beep”, indicates an error with  
the blank CD-R disc. Try using another CD-R  
disc in the recorder.  
Mode  
Status  
Error Display in Additional System Modes  
System error.  
Status  
Mode  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CWR-424-52  
Microboards Technology LLC  
Specifications:  
CD Recorder Drive:  
Power Source:  
Weight:  
52x CD-RW speed selectable drive  
115V/230V 50-60Hz switchable power supply  
42 pounds  
Dimensions:  
19” (W) x 18” (D) x 7” (H)  
250W  
Power supply:  
Environment:  
Temperature: 40°C (104°F) / 5°C (41°F)  
Humidity: 20% - 80%  
Supported Formats:  
CD-DA , Mixed Mode, ISO9660, Hybrid, CD-ROM Mode1/Mode2, CD-I, CD-ROM XA Form1/form2 , HFS,  
UFS,CD-EXTRA (CD-PLUS)  
Firmware Update  
Occasionally it may be necessary to load new or updated firmware on to the CWR-424-52  
duplicator. You will be sent a CD containing the firmware program. Please follow  
these steps to load the disc.  
Hold down the YES button and turn on power to the system.  
The system will beep once.  
Release the YES button.  
The Reader drive will eject.  
Please the firmware CD into the Reader drive and close the tray.  
The Status lights will blink as the firmware program is being loaded.  
Once the firmware is loaded, the Reader drive will eject the disc.  
Remove the firmware disc from the Reader and close the tray.  
The CWR-424-52 duplicator will now reboot and be ready for use with the new  
firmware program running.  
Contact Information  
For technical questions or support issues, please contact your dealer. You may also reach Microboards  
Technology technical support at PH: 952-556-1639, FAX: 952-556-1620, by email at or on the web at  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

KWC Indoor Furnishings 12131042700 User Manual
Lanzar Car Audio Car Stereo System HTG 2600D User Manual
Lenovo Computer Accessories 0A33942 User Manual
LG Electronics TV VCR Combo VX8575 User Manual
Lifescan Blood Glucose Meter UltraSmart User Manual
LST Smoke Alarm B524IEFT 1 User Manual
Mackie TV Cables Firewire OPtion Card fot Onyx Mixer User Manual
Magellan GPS Receiver MAP 410 User Manual
Makita Cordless Drill 6096D User Manual
Makita Saw Model 5007NL User Manual