TV • VIDEO • CAMCORDER • MECABLITZ
SAT-
Operating Instructions
081NB1010
082 NB 1014
083 NB 1018
Download from Www.Somanuals.com. All Manuals Search And Download.
LNC frequency
for 100 Hz sets
1. SAT Programming
The most popular SAT stations are already stored in this TV set (see the station table). These stations are divided into the following groups:
ASTRA TV stations, HOTBIRD TV stations and EUTELSAT TV stations. Each of these groups can be assigned only in its entirety and is sto-
red starting at the programme position you specify. In the case of the ASTRA satellite, the group is subdivided into TV and radio stations.
Example: You want to store all of the ASTRA TV stations, in the order in which they are listed in the station table, starting at programme
position 01.
Press this key on the remote
The screen displays
Explanation
control
MENU
?
TV
In this menu, you can select the various satellites.
return
TV picture
Help
1. Call the menu „SAT
programming“
The available stations will change depending on which
satellite is selected.
SAT-programming
MENU
SATELLITE
ASTRA
HOTBIRD
EUTELSAT-F2
EUTELSAT-F3
AV
6 9 6 + S 0 1 A - G B
MENU
?
TV
Depending on the satellite you have selected, various
TV and radio stations are presented for selection. The
number of stations of each type is shown in figures.
return
TV picture
Help
2. Select the desired satellite
(in this example, ASTRA)
SAT-
programming
In TV sets which can manage more than
200 program positions, a separate station
table is generated for SAT radio stations.
This table contains only radio stations.
ASTRA
58 TV-stations *
41 radio stations *
45 ADR stations *
AV
22 kHz signal
LNC-Freq. H
LNC-Freq. V
Off
9,75 GHz
9,75 GHz
* Number of stations as in January 1997
ADR stations can be selected only if the ADR-
SAT upgrade kit is installed!
6 9 6 + S 0 1 B - G B
ꢀ
MENU
?
TV
This setting is required only for multi-switch systems
return
TV picture
Help
3. Set the 22 kHz switching
signal
with a 22 kHz switching signal.
SAT-programming
If you select On, the subsequently stored programme
table will be stored with this setting (= 22 kHz signal on).
AV
ASTRA
58 TV stations *
41 radio stations *
45 ADR stations *
The 22 kHz switching signal can be switched on or off,
depending on the frequency.
-
AV
22 kHz signal
Off
LNC-Freq. H
LNC-Freq. V
9,75 GHz
9,75 GHz
* Number of stations as in January 1997
6 9 6 + S 0 1 E - G B
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LNC frequency
for 100 Hz sets
1. SAT Programming
Press this key on the remote
control
The screen displays
Explanation
MENU
Before your transfer the desired group of SAT stations,
you must always set and store the required LNC
frequencies.
?
TV
return
TV picture
Help
4. Set the LNC frequencies
SAT-programming
If these LNC frequencies are not set, the stations
will not be stored with the correct channel num-
ber or the TV set will be tuned incorrectly if you
enter a station frequency. In such cases, no
picture will be displayed when you select the
related programme position or a station which is
stored in another programme position will appear.
red
ASTRA
58 TV stations *
41 radio stations *
45 ADR stations *
-
AV
22 kHz signal
Off
LNC-Freq. H
LNC-Freq. V
9,75 GHz
9,75 GHz
If you press the red key once, you can adjust the LNC
frequencies for ve- rtical and horizontal polarisation
6 9 6 - S 0 1 F - G B
together with the
keys.
If you press the red key twice, only the LNC frequency
for vertical polarisation is selected for adjustment with
-
the
keys. The LNC frequencies are stored
MENU
?
TV
return
TV picture
Help
together with the stations.
5. Select the desired stations
(in this example: ASTRA)
SAT-
p
rogramming
The first 10 program positions of the selected group of
stations are displayed in the station table.
P
+
You can now select individual stations with the
ARD
P
-
ZDF
and
key.
keys and delete them by pressing the
SAT1
RTL
BR 3
NDR3
MDR3
SWF3
This can be done, for example, to remove encoded
stations for which you have no decoder.
WDR3
3SAT
ASTRA
* Number of stations as in January 1997
ARD delete
58 TV stations *
from prog number – –
MENU
?
TV
The TV set now asks for the first program position, i.e.
the programme position at which storage of the stati-
ons is to start. Enter the desired program position with
the numerical keys. The selected stations will then be
stored continuously, starting at this program position.
return
TV picture
Help
6. Select the first programme
position
SAT-programming
ARD
ZDF
SAT1
RTL
BR 3
NDR3
MDR3
SWF3
WDR3
3SAT
In TV sets which can manage more than
200 program positions, a separate station
table (with blue header line) is generated
for SAT radio stations. This table contains
only radio stations. The function can be
0
1
TV
cancelled at this point by pressing the
ASTRA
ARD delete
key; the stored settings are not changed
.
58 TV stations *
store?
from prog number
OK
The selected stations are copied from the station table
to the programme storage.
7. Store the stations and return
to the TV picture
After the transfer, you can sort the stations as described
in Section 3.1 of the Operating Instructions for the TV
set.
OK
TV
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LNC frequency
for 50 Hz sets
1. SAT Programming
The most popular SAT stations are already stored in this TV set (see the station table). These stations are divided into the following groups:
ASTRA TV stations, ASTRA radio stations and EUTELSAT TV stations. Each of these groups can be assigned only in its entirety and is
stored starting at the program position you specify.
Example: You have programmed your TV set to receive terrestrial stations (stations you receive via the normal aerial) on program positions
1 to 3. You now want to store all of the ASTRA TV stations, in the order in which they are listed in the station table, starting at
program position 4.
Press this key on the remote
The screen displays
Explanation
control
MENU
The Autostore function can be selected only if a terre-
strial tuner (for reception via a normal aerial) is fitted in
your TV set.
TV
?
return
picture
Help
1. Call the menu „Station set-
tings“
Station settings
Station table
MENU
1
2
5
8
0
3
6
9
4
7
Autostore
--/-
P
+
-
OK
SAT programming
P
-
TV
MENU
?
A
B
AV
6 9 6 + S 0 3 - G B
MENU
TV
?
return
TV picture
Help
2. Call the menu „SAT pro-
gramming“
SAT-programming
LNC-Freq. H
9.75 GHz
1
2
5
8
0
3
6
9
4
7
LNC-Freq. V
9.75 GHz
--/-
P
+
-
OK
SAT programme tables
P
-
TV
MENU
AV
with 22 kHz signal On/Off
?
A
B
AV
6 9 6 + S 0 3 E - G B
MENU
TV
?
return
TV picture
Help
Before your transfer the desired group of SAT stations,
you must always set and store the required LNC fre-
quencies.
3. Set the LNC frequencies
SAT-programming
The values to which the LNC frequencies V and H are
set depending on the LNCs used in your SAT aerial.
They may be set to frequencies in the range of 9.50
GHz to 12.00 GHz. Please consult the technical data of
your SAT aerial for the correct values.
LNC-Freq. H
9.75 GHz
1
2
5
8
0
3
6
9
4
7
LNC-Freq. V
9.75 GHz
--/-
-
P
+
-
OK
SAT programme tables
P
-
TV
MENU
AV
with 22 kHz signal On/Off
?
If these LNC frequencies are not set, the stations will not
be stored with the correct channel number or the TV set
will be tuned incorrectly if you enter a station frequency.
In such cases, no picture will be displayed when you
select the related program position or a station which is
stored in another program position will appear.
A
B
AV
-
store ?
6 9 6 + S 0 3 E - S - G B
OK
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring programs
for 50 Hz sets
1. SAT Programming
Press this key on the remote
control
The screen displays
Explanation
MENU
TV
?
This setting is required only for multi-switch systems
with a 22 kHz switching signal.
4. Select the LNC (necessary
only for multi-switch
systems)
return
TV picture
Help
SAT-programming
If you select On, the subsequently stored program
table will be stored with this setting (= 22 kHz signal on).
LNC-Freq. H
9.75 GHz
1
4
7
2
5
8
0
3
6
9
LNC-Freq. V
9.75 GHz
AV
--/-
P
+
-
OK
SAT programme tables
with 22 kHz signal On/Off
P
-
-
TV
MENU
AV
?
A
B
AV
6 9 6 + S 0 3 K - G B
This menu shows the various groups of SAT programs.
MENU
5. Select the menu „SAT
program tables“
TV
?
return
TV picture
Help
With the aid of the colored keys, you can select the
desired group and then transfer this entire group.
SAT programme tables
The number of stations indicates how many stations
are stored.
ASTRA TV stations
1
2
5
8
0
3
6
9
4
7
ASTRA radio stations
EUTELSAT F1 TV stat.
The number of stations depends on the
--/-
ꢀ
previously selected V and H LNC frequencies.
P
+
-
OK
P
-
TV
MENU
AV
EUTELSAT F2 TV stat.
?
A
B
AV
EUTELSAT F3-TV stat.
6 9 6 + S 0 3 F - G B
MENU
TV
?
return
TV picture
Help
6. Select „ASTRA TV stations“
and enter the program posi-
tion (in this example: 04)
When you select a group, the text „from prog. number
- - “ is displayed on the next line.
Enter the number of the program position at which the
first station of the group is to be stored (the remaining
stations of the group will be stored in the following
program positions).
SAT programme tables
ASTRA TV stations
1
2
5
8
0
3
6
9
from prog number 04
4
7
ASTRA radio stations
EUTELSAT F1 TV stat.
--/-
P
+
The precise assignments and the order of
the stations can be found in the enclosed
station table.
-
OK
ꢀ
P
-
TV
MENU
AV
?
EUTELSAT F2 TV stat.
A
B
AV
0
4
EUTELSAT F3 TV stat.
You can terminate the function with the
key at this point without losing the
previously stored settings.
store ?
OK
6 9 6 + S 0 3 L - G B
TV
7. Transfer the stations to the
program positions and
return to the TV picture
Back to the example:
All ASTRA TV stations are copied from the station table to
the program storage, starting at program position 04.
Any program settings already stored in these positions
will be overwritten and are thus lost.
OK
TV
If you wish to change the program assignments, you
can sort, copy or delete the settings of the program
positions as described in Section 3.1 of the Operating
Instructions for the TV set.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the LNC voltages
2. LNC Power Supply
TV satellites such as ASTRA 1A - D transmit the various programs with vertical (V) or horizontal (H) polarization.
If the polarization of your satellite aerial is switched by means of the LNC voltage, you must set the appropriate voltage for each station.
The two voltages which are required for selection of the polarization can be set in the menu „LNC power supply“.
For each station listed in the station table, one of these two voltages must then be assigned in the submenu „Aerial control“.
If you are connected to a community aerial, the LNC voltages must always be set to „Off“.
Press this key on the remote
The screen displays
Explanation
control
MENU
TV
?
return
TV picture
Help
These settings can be made only for SAT program
positions.
1. Call the menu „SAT set-
tings“
SAT settings
The supply voltages and the control of the satellite
aerial can be set in this menu.
LNC pwr supply
1
4
7
2
5
8
0
3
6
9
MENU
The LNC voltages are necessary to permit selection of
either horizontal (H) or vertical (V) polarization.
Polarizer
--/-
P
+
-
OK
red
P
-
TV
MENU
?
A
B
AV
6 9 6 + S 0 2 A - G B
MENU
The supply voltages required for setting the LNC to
horizontal and vertical polarization are set here.
TV
?
return
TV picture
Help
2. Call the menu „LNC power
supply“
If your TV set is connected to a community aerial,
LNC voltage H and LNC voltage V must both be set to
OFF in order to prevent damage to the community
aerial.
LNC pwr supply
LNC voltage H
1
2
5
8
0
3
6
9
Off
Off
4
7
LNC voltage V
To do this, press the - key several times until Off is
--/-
P
+
-
OK
displayed.
P
-
TV
OK
Store the selected values by pressing the
key.
MENU
?
A
B
AV
6 9 6 + S 0 2 B - G B
MENU
The supply voltage for the SAT aerial can be set to Off
or to a voltage in the range of 12 V to 19 V. When the
correct voltage is set, the picture from the SAT station
being received on this program position appears
behind the menu display.
TV
?
return
TV picture
Help
3. Set „LNC voltage H“
LNC pwr supply
LNC voltage H
1
2
5
8
0
3
6
9
On
On
4
7
Whenever the voltage setting is changed, a red box
LNC voltage V
--/-
appears at the bottom right of the screen. When you
-
P
+
OK
-
have set the correct voltage, press the
store it.
key to
OK
P
-
TV
MENU
?
A
B
AV
6 9 6 + S 0 2 C - G B
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the LNC voltages
2. LNC Power Supply
Press this key on the remote
control
The screen displays
Explanation
MENU
TV
?
return
TV picture
Help
The supply voltage for the SAT aerial can be set to Off
or to a voltage in the range of 12 V to 19 V. When the
correct voltage is set, the picture from the SAT station
being received on this program position appears
behind the menu display.
4. Set „LNC voltage V“
LNC pwr supply
LNC voltage H
1
2
5
8
0
3
6
9
On
On
4
7
Whenever the voltage setting is changed, a red box
LNC voltage V
--/-
appears at the bottom right of the screen. When you
P
+
OK
-
have set the correct voltage, press the
store it.
key to
OK
P
-
-
TV
MENU
One of these two voltages can subsequently be assigned
to each SAT program position. To do this, call the station
?
A
B
AV
table, open the menu „Channel“ with the
key
store ?
and then, in the submenu „Aerial control“, select the
6 9 6 + S 0 2 D - G B
-
OK
LNC supply voltage H or V with the
keys . See
section 4 of these instructions.
MENU
OK
TV
?
return
TV picture
Help
Pressing the
key stores the values you have set.
5. Store the settings
LNC pwr supply
LNC voltage H
1
2
5
8
0
3
6
9
On
On
4
7
LNC voltage V
--/-
OK
P
+
-
OK
P
-
TV
MENU
?
A
B
AV
6 9 6 + S 0 2 E - G B
6. Return to the TV picture
TV
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the polarizer values
3. Polarizer
In some satellite aerials, horizontal (H) and vertical (V) polarization of the LNC is selected by means of a magnetic polarizer.
With this type of aerial, up to 5 current values (polarizer 1..5) are sent via the polarizer socket (on the back of the TV set) to the magnetic
polarizer, which then sets the appropriate polarization.
You can set 5 global polarizer values, which can then be assigned individually to the various program positions in the submenu „Aerial
control“.
Press this key on the remote
The screen displays
Explanation
control
MENU
TV
?
return
TV picture
Help
1. Call the menu „SAT set-
tings“
SAT settings
LNC pwr supply
1
4
7
2
5
8
0
3
6
9
MENU
Polarizer
--/-
P
+
red
-
OK
P
-
TV
MENU
?
A
B
AV
6 9 6 + S 0 3 A - G B
MENU
TV
?
return
TV picture
Help
These settings can be carried out only on SAT program
positions and should be made only if your SAT aerial
has a magnetic polarizer.
2. Call the menu „Polarizer“
and set polarizer 1
Polarizer
The polarizer settings can be used to select H or V
polarization.
Polarizer 1
-
1
2
5
8
0
3
6
9
+
+
+
+
+
15
70
4
7
Polarizer 2
-
The polarization angle can be adjusted to match the
--/-
-
satellite with the
keys.
P
+
-
OK
Polarizer 3
-
P
-
The polarization angle can be adjusted in individual
steps in the ranges 0 to +99 and 0 to -99. The received
TV picture is visible behind the menu display.
-70
99
TV
-
MENU
AV
Polarizer 4
-
?
A
B
AV
Polarizer 5
-
Adjust the polarizer setting until the received picture is
free of interferences.
-99
6 9 6 + S 0 3 B - S - G B
store ?
OK
Polarizers 2 to 5 can be selected with the co- lored keys
and adjusted as described above with the
keys.
When the TV picture is free of interference, the polarizer
3. Store the polarizer setting
and return to the TV picture
OK
setting can be stored by pressing the
key.
One of the five polarizer settings set in this menu can
be selected for each SAT program position. This is
done in the submenu „Aerial control“ of the SAT pro-
gram positions in the station table - see section 4 of
these instructions.
OK
TV
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning LNC or polarizer values
4. Aerial Control
Depending on the type of satellite aerial you use, there are three methods of aerial control for selection of H and V polarization:
• control by means of the LNC voltage (the most common method),
• control with the aid of a magnetic polarizer,
• control with a relay.
The appropriate control method for polarization must be selected in the station table. H for horizontal polarization or V for vertical polarization
is displayed in the submenu „Aerial control“ of this table.
Press this key on the remote
The screen displays
Explanation
control
3
SAT 1
Std channel
40
Aerial
The frequency setting may differ from model to model,
as shown in the picture.
1. Call the station table and
select the submenu „Chan-
nel“
44
45
46
47
48
49
Spec. channel
SAT-TV
SAT-RADIO
AV
H: 11,494 ARD
Aerial control
3
SAT 1
Std channel
40
Aerial
44
45
46
47
48
49
Spec. channel
Fine tuning
SAT-Frq.
AV
H: 11,494 ARD
Aerial control
In this submenu, one of the previously set values (see
sections 1 and 2 of these operating instructions) can
be selected and assigned to the current SAT program
position. This is done with the aid of the colored keys.
2. Call the submenu „Aerial
control“ and set the LNC
voltage
LNC pwr supply:
22 kHz signal:
Polarizer:
H
On/Off
1
On/Off
On/Off
When you press the blue key, the text „LNC power
supply“ is displayed on a blue background to indicate
that it is active.
red
AV
Relay:
AFC:
6 9 6 + S 0 4 B - G B
You can select the control voltage for either H or V
-
-
store ?
OK
polarization with the
keys.
The setting of the control voltages is described in sec-
tion 2 of these operating instructions.
Here you can superimpose a 22 kHz switching
signal upon the LNC voltage for horizontal or ver-
tical polarization.
3. Make the LNC selection
(required only for multi-
switch systems)
This is used to select the desired input of a multi-
switch system.
LNC pwr supply:
22 kHz signal:
Polarizer:
H
On/Off
2
On/Off
On/Off
AV
Relay:
AFC:
6 9 6 + S 0 4 C - G B
-
store ?
OK
ˇ
ˇ
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning LNC or polarizer values
4. Aerial Control
Press this key on the remote
control
The screen displays
Explanation
Pressing the white key causes the text Polarizer to be
displayed on a white background to indicate that it is
active.
4. Set the polarizer
One of the five polarizer settings (see section 3 of the-
se op- erating instructions) can now be selected with
LNC pwr supply:
22 kHz signal:
Polarizer:
H
the
keys.
On/Off
2
-
AV
Relay:
AFC:
On/Off
On/Off
696+S04D-GB
store ?
OK
The relay can be used to send a control voltage of
approximately 12 V („On“) or not („Off“).
5. Set the relay control voltage
LNC pwr supply:
22 kHz signal:
Polarizer:
H
This setting can be made individually for each program
position.
On/Off
1
On/Off
On/Off
AV
Relay:
AFC:
6 9 6 + S 0 4 E - G B
AV
store ?
OK
6ˇ96ˇ+S00
-
6. Store the settings and
return to the TV picture
OK
TV
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SAT frequency input / station search
4. Aerial Control
A station table is enclosed with the SAT upgrade kit. This station table can, as described in section 1 „SAT programming/Tansferring pro-
grams“, be transferred to sequential program positions, starting at a specified position. If the channel assignments of the SAT stations are
modified, or if new SAT stations are transmitted, these can be found and stored with the station search function.
If the transponder frequency is known, this can be entered directly with the numeric keys.
Press this key on the remote
The screen displays
Explanation
control
44
45
46
47
48
49
The frequency setting may differ from model to model,
as shown in the picture.
Std channel
Spec. channel
SAT-TV
SAT-RADIO
H: 11,494 ARD
Aerial control
1. Select a SAT program positi-
on and call the station table
AV
3
SAT 1
Std channel
40
Aerial
44
45
46
47
48
49
Spec. channel
Fine tuning
SAT-Frq.
AV
H: 11,494 ARD
Aerial control
esne
If you enter the frequency directly, the station table is
temporarily removed to display the selected station.
Std channel
Spec. channel
SAT-TV
2. Enter the frequency with the
numeric keys
AV
SAT-RADIO
H: 11,494 ARD
The frequency input functions correctly
only if the LNC frequency has been set
correctly in the „SAT programming“
menu (see Section 1, „ SAT program-
ming“, LNC frequency“).
Aerial control
1
4
7
2
5
8
0
3
6
9
Std channel
Spec. channel
Fine tuning
AV
SAT-Frq.
H: 11,494 ARD
Aerial control
store ?
OK
The frequency setting may differ from model to model,
as shown in the picture.
The station search starts at the currently displayed
Std channel
Spec. channel
SAT-TV
channel number or frequency. Pressing the
key
3. Start the station search
-
starts a search in ascending order, pressing the
AV
SAT-RADIO
Aerial control
H: 11,494 ARD
key, a search in descending order. When a station is
found, the search stops.
Std channel
Spec. channel
Fine tuning
SAT-Frq.
Aerial control
-
If you do not wish to store this station, press the or
- key to resume the search.
AV
H: 11,494 ARD
store ?
OK
The frequency setting may differ from model to model,
as shown in the picture.
4. Store the settings and
return to the TV picture
OK
TV
TV picture
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch off AFC
4. Aerial Control
When stations are assigned to the various programme positions, they are automatically tuned to the centre frequency. This is normally
satisfactory.
If the results of this automatic tuning are unsatisfactory, you can turn off the AFC (Automatic Frequency Control) function for specific pro-
gramme positions and adjust the tuning manually.
Select the programme position which is to be tuned manually.
Press this key on the remote
The screen displays
Explanation
control
The function „AFC“ is set to „On“ in the factory.
MENU
TV
?
return
TV picture
Help
1. Call the menu
„Aerial control“.
This setting causes all programme positions to be
tuned to the centre frequency.
TV station table
LM
0
1
2
3
4
5
6
7
8
9
Videorec.1
Aerial
VTR1
ARD
ZDF
Aerial
LNC pwr supply:
H
22 kHz signal:
On/Off
Polarizer:
2
AV
Relay:
On/Off
AFC:
On/Off
red
Std, Pict., Sound
6 9 6 + S 0 4 H - G B
Call the submenu „AFC“ by pressing the red key.
2. Switch off the AFC and
adjust the frequency.
Press the red key again to switch off the AFC function.
-
LNC pwr supply:
22 kHz signal:
Polarizer:
H
The frequency can then be adjusted with the
keys.
On/Off
1
red
AV
Relay:
AFC:
On/Off
On/Off
When this is done, the station table is removed from
the screen to permit better assessment of the picture
quality.
6 9 6 + S 0 4 F - G B
red
store ?
OK
-
6ˇ96ˇ+S00
Once you are satisfied with the picture, store the set-
3. Store the modified frequen-
cy and return to the TV pic-
ture.
OK
tings for this programme position by pressing the
key.
OK
TV
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Muting and sound mode
5. SAT Sound Settings
All parameters for the sound adjustment for a satellite station can be programmed in the submenu „Adj. SAT sound“.
These adjustments need to be made only if new stations, whose settings are not stored in the SAT program assignments, are to be received.
Press this key on the remote
The screen displays
Explanation
control
MENU
TV
?
return
TV picture
Help
If the TV station table is now dis-
played instead of the combined
station table, see the instructions
in Step 2.
1. Call the station table and
select „Further settings“
TV station table
LM
0
VTR1
ARD
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
—
—
—
—
—
—
—
—
—
ZDF
SAT 1
RTL
BR 3
N 3
red
MDR 3
SWF 3
MDR 3
<< further settings
Logo, Channel, Signal
6 9 6 + S 0 5 A - G B
2. Call the submenu „Sound“
and set the muting function
MENU
TV
?
Many SAT TV stations also transmit radio programs on
sound subcarriers, e.g. RTL Radio on RTL 4 (see also
section 10,“SAT radio operation“). In the case of enco-
ded SAT stations, the TV set switches the sound off
because no TV station can be detected.
return
TV picture
Help
TV set with
station table
TV set with TV
station table
TV station table
LM
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
The muting function must be set to Off for the recepti-
on of such encoded SAT stations.
SAT 1
The muting function permits you to receive radio pro-
grams from encoded stations.
Volume adjustm.
Muting
Adj. SAT sound
+00
On
If the sound from encoded SAT stations is switched
off, reception of the sound is possible only by setting
the muting function to Off.
-
Logo, Channel, Signal
6 9 6 + S 0 5 B - G B
3. Call the submenu „Adj. SAT
sound“ and set the sound
mode
MENU
TV
?
return
TV picture
Help All parameters required for a SAT station can be adju-
sted in the submenu Adj. SAT sound.
TV station table
These settings must be made individually for each
program position.
LM
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
Sound mode:
Stereo
In this menu, you can select the sound mode: MONO,
STEREO or DUAL (for dual-channel programs).
Channel 1:
Channel 2:
Band width:
Deemphasis:
7.02 MHz
7.20 MHz
130 kHz
PANDA
AV
-
Logo, Channel, Signal
6 9 6 + S 0 5 C - G B
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Bandwidth, deemphasis
5. SAT Sound Settings
Press this key on the remote
control
The screen displays
Explanation
MENU
TV
?
return
TV picture
Help
The most common sound carrier frequencies can be
selected with the aid of the numeric keys of the remote
4. Set „Channel 1“ and/or
„Channel 2“
TV station table
1
control. These ke2ys have the following assignments:
46,20 MHz 5 6,50 MHz 6 6,65 MHz
77,02 MHz 8 7,20 MHz 9 7,38 MHz
0 7,74 MHz
3
LM
0
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
7,56 MHz
7,92 MHz
1
2
3
4
5
6
7
8
9
—
—
—
8,10 MHz
The frequency value can also be adjusted in steps of 10 kHz
in the range of 5.00 MHz to 9.99 MHz with the
Sound mode:
Channel 1:
Channel 2:
Band width:
Stereo
-
keys.
7.02 MHz
7.20 MHz
130 kHz
PANDA
In the case of stations which transmit stereo sound,
the frequency for Channel 2 is also changed whenever
that for Channel 1 is changed, since these frequencies
are always 180 kHz apart. You can subsequently
adjust the frequency for Channel 2 independently of
that for Channel 1.
AV
-
Deemphasis:
Logo, Channel, Signal
696+S05D-GB
MENU
TV
?
return
TV picture
Help
The sound carrier frequencies of some SAT stations,
particularly those which use sound subcarriers, are
close together and may interfere with each other. The
5. Set „Bandwidth“
TV station table
bandwidth can be adjusted to prevent such interference
As a rule, the smallest bandwidth should be set.
.
LM
0
1
2
3
4
5
6
7
8
9
VTR1
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
AV
ARD
ZDF
Note: always select 130 kHz for ASTRA sub-
carriers.
ꢀ
Sound mode:
Stereo
Channel 1:
Channel 2:
Band width:
Deemphasis:
7.02 MHz
7.20 MHz
130 kHz
PANDA
A default value of 280 kHz is preset for MONO stations
and a default value of 130 kHz for STEREO and DUAL
stations.
-
AV
Logo, Channel, Signal
6 9 6 + S 0 5 E - G B
MENU
TV
?
return
TV picture
Help
The deemphasis (a method of reducing noise on the
sound channel) improves the sound quality of a SAT
station.
6. Set „Deemphasis“
TV station table
One of the following settings may be selected:
•Off • 50µs •75 µs •J17 •PANDA
LM
red
0
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
Note: for ASTRA subcarriers. always select
PANDA
ꢀ
Sound mode:
Stereo
-
Channel 1:
Channel 2:
Band width:
Deemphasis:
7.02 MHz
7.20 MHz
130 kHz
PANDA
The bandwidth and deemphasis are set automatically
to default values when you switch between MONO,
STEREO and DUAL sound modes. Other settings can be
found in the appropriate tables in technical publications.
AV
Logo, Channel, Signal
6 9 6 + S 0 5 F - G B
OK
Pressing the
stored.
causes the current settings to be
7. Store the settings and
return to the TV picture
OK
TV
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Video level/Bandwidth
6. Picture Adjustment
The Video level adjustment can be used to compensate for the differing modulation levels of various satellite stations and thus to maintain
a constant contrast.
Under certain circumstances, you may be able to get rid of interference with the Bandwidth adjustment.
Press this key on the remote
The screen displays
Explanation
control
MENU
TV
?
return
TV picture
Help
If the TV station table is now display-
ed instead of the combined station
table, see the instructions in Step 2.
1. Call the second station table
TV station table
LM
0
VTR1
ARD
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
—
—
—
—
—
—
—
—
—
ZDF
SAT 1
RTL
BR 3
N 3
red
MDR 3
SWF 3
MDR 3
<< further settings
Logo, Channel, Signal
6 9 6 + S 0 5 A - G B
MENU
TV
?
return
TV picture
Help
In SAT mode, this submenu includes the facilities for
adjusting the video level and the video signal.
2. Call the submenu „Picture“
TV station table
TV set with TV
station table
TV set with
station table
For adjustment of chrominance and colour offset plea-
se refer to the operating instructions for the TV set.
LM
0
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
1
2
3
4
5
6
7
8
9
—
—
—
Chrom. adjustm.
Col.offset adj.
Video signal
Video level
00
0
FBAS
3
27 MHz
AV
Ȅ
Band width
red
Logo, Channel, Signal
6 9 6 + S 0 6 A - G B
-
The video level can be adjusted with the
keys to
3. Adjust the video level
a value between 1 and 4.
-
Use the
picture.
keys to adjust the video level for the best
Chrom. adjustm.
Col.offset adj.
Video signal
Video level
00
0
FBAS
3
AV
AV
Ȅ
Band width
27 MHz
6 9 6 + S 0 6 B - G B
-
store ?
OK
MENU
TV
?
return
TV picture
Help
The video bandwidth is set in the factory to 27 MHz.
4. Adjust the video bandwidth
Reducing this to 18 MHz may result in a better picture
if the aerial signal is weak or if neighbouring stations
are causing interference.
TV station table
red
LM
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
-
-
The bandwidth can be changed with the
keys.
Chrom. adjustm.
Col.offset adj.
Video signal
Video level
00
0
FBAS
3
AV
Ȅ
Band width
27 MHz
5. Store the settings and
return to the TV picture
Logo, Channel, Signal
6 9 6 + S 0 6 C - G B
OK
TV
TV picture
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the video signal
7. Decoder Operation
In general, the video signal is always set to „FBAS“ (composite color signal). If you use a decoder which requires a baseband signal
(see operating instructions for your decoder), the video signal must be set to „BB“ (baseband).
Press this key on the remote
The screen displays
Explanation
control
MENU
TV
?
If the TV station table is now display-
ed instead of the combined station
table, see the instructions in Step 2.
return
TV picture
Help
1. Call the second station table
TV station table
LM
0
VTR1
ARD
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
—
—
—
—
—
—
—
—
—
ZDF
red
SAT 1
RTL
BR 3
N 3
MDR 3
SWF 3
MDR 3
<< further settings
Logo, Channel, Signal
6 9 6 + S 0 5 A - G B
MENU
TV
?
return
TV picture
Help
2. Call the submenu „Picture“
TV set with TV
station table
TV set with
station table
TV station table
LM
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
Chrom. adjustm.
Col.offset adj.
Video signal
Video level
00
0
FBAS
3
27 MHz
AV
Ȅ
Band width
red
Logo, Channel, Signal
6 9 6 + S 0 6 A - G B
The video signal is set in the factory to FBAS.
3. Set the video signal
If you want to receive an encoded station, you need a
decoder. Most decoders require the setting FBAS.
Chrom. adjustm.
Col.offset adj.
Video signal
Video level
00
0
FBAS
3
However, some decoders require the setting BB for
AV
correct operation.
Ȅ
Band width
27 MHz
-
6 9 6 + S 0 6 D - G B
You can select either FBAS or BB with the
keys.
-
store ?
OK
4. Store the setting and return
to the TV picture
OK
TV
TV picture
17
Download from Www.Somanuals.com. All Manuals Search And Download.
On TV sets with 1 EURO socket
8. Recording SAT Programs
In the AV menu, you can define which of the connected AV devices is to supply the picture for the TV screen. Once the settings have been
defined, you can switch to standby mode with the key and the defined function is executed in standby mode. AV device is a generic
term for all external audio/video devices, such as video cassette recorders, camcorders, video disk players, photo CD players, etc., which
can be connected to a TV set.
Example: You want to record the satellite program on program position 10 on your video cassette recorder (VCR), which is connected to the
EURO socket. Tune to the SAT station from which you want to record.
Press this key on the remote
The screen displays
Explanation
control
MENU
TV
?
return
TV picture
Help
If program position 10 is a SAT program position, pres-
1. Call the AV menu and define
the signal path
AV
sing the
key causes the program position number
to be displayed automatically in the line with the red
background (in this example: SAT Pr 10 ➜ Euro).
AV-menu
Aerial
ARD
1
2
5
8
0
3
6
9
The AV menu can also be called from any other pro-
gram position and the number of the SAT program
position then entered with the numeric keys. The TV
set then switches to the selected SAT program position.
4
7
Input Euro (FBAS)
Input S-Video (Y/C)
Input Cinch (FBAS)
SAT-Pr. 10 ➔ Euro
--/-
AV
P
+
-
OK
P
-
TV
MENU
AV
red
?
A
B
AV
record ?
OK
6 9 6 + S 0 8 A - G B
OK
The setting is confirmed with the
key.
2. Confirm the setting and cle-
ar the menu
MENU
TV
?
return
TV picture
Help
You can now switch to SAT recording mode (picture
and sound off) with the key.
AV-menu
If you call the menu „Timer/childlock“ and program
a switch-off time in the submenu „Time settings“, the
TV set will switch from SAT recording mode to standby
mode at the preset time.
Aerial
1
2
5
8
0
3
6
9
4
7
Input Euro (FBAS)
Input S-Video (Y/C)
Input Cinch (FBAS)
--/-
OK
TV
P
+
-
You can now switch to any other desired terrestrial
program position. You cannot switch to another SAT
program position; to remind you of this, a warning box
is displayed if you attempt to do so.
OK
P
-
TV
MENU
AV
?
A
B
AV
SAT-Pr. 10 ➔ Euro
AV-recording
696+S08B-GB
AV
Call the AV menu with the
recording by pressing the
key and cancel the SAT
key.
3. Terminating a SAT AV recor-
ding operation
OK
TV
The menu can be cleared by pressing the
key.
AV
OK
Indication of SAT AV recording in standby mode:
- green LED lights.
On TV sets equipped with two SAT upgra-
de kits, you can record from one SAT sta-
tion and watch another SAT station at the
same time.
TV
18
Download from Www.Somanuals.com. All Manuals Search And Download.
On TV sets with 3 EURO sockets
8. Recording SAT Programs
In the menu „AV recording“, you can define which of the connected video recorders is to record the SAT program. The connected video
recorders do not need to have their own SAT receivers.
Example: You want to record a satellite program from the station on program position 10 on video recorder 1, which is connected to the
EURO-2 socket. Tune to the SAT station from which you want to record.
Press this key on the remote
The screen displays
Explanation
control
MENU
TV
?
return
TV picture
Help
The TV set must be tuned to the station from which the
program is to be recorded!
1. Call the AV recording menu
and define the signal path
AV recording
Back to the example:
- Input
Output
The SAT program position 10 appears automatically in
the footer line with the yellow border when you press
the red key.
Video Rec.2
Video Rec.1
Decoder A
Camcorder
Pr 10: 3SAT
Videorec.2
Videorec.1
AV
The selected program is now available for recording
on a video recorder which is selected in the next step.
red
Pr. 10: 3SAT ©
696+S08C-GB
A Device connection
When you have selected the desired recorder (Video-
rec. 1 in this example) the recording path is shown in
the footer line with the yellow frame.
OK
MENU
TV
?
return
TV picture
Help
2. Select the desired video
recorder (in this example:
Video rec. 1) and store the
setting
AV recording
Confirm the setting by pressing the
key.
- Input
Output
The text in the red box changes from „Record?“ to
„Stop?“.
If you want, you can now switch to SAT-AV recording
mode (picture and sound switched off) by pressing the
key.
If you call the menu Timer/Childlock and set a
power-off time in the submenu Time settings, the TV
set will switch from SAT recording mode to standby
mode at the programmed time.
Video Rec.2
Video Rec.1
Decoder A
Camcorder
Pr 10: 3SAT
Videorec.2
Videorec.1
OK
Pr. 10: 3SAT ©
696+S08C-GB
Start a direct recording on the videorecorder.
A Device connection
AV
Call the AV menu with the
key, press the red key
3. Terminating a SAT AV recor-
ding operation
OK
and cancel the SAT recording by pressing the
key.
TV
The menu can be cleared by pressing the
key.
Indication of SAT AV recording in standby mode:
AV
- the program position number, e.g. PS 10, is displayed
in the permanent display.
OK
TV
On TV sets equipped with two SAT upgra-
de kits, you can record from one SAT sta-
tion and watch another SAT station at the
same time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
On TV sets with
1 EURO socket
9. Timer-controlled Recording of SAT Programs
The menu SAT timer recording should be used only if you want to record a SAT program on a video recorder which does not have its own
SAT receiver. With this menu, a SAT signal from the TV set can be made available to a simple video recorder without its own SAT receiver.
Eight SAT timers can be preset up to two months in advance.
The settings for a TV set with 3 sockets is described in Section 7.1 or 8.2, „Timer recording“ of the Operating Instructions for the TV set.
Example: On 12.12.95, you want to record a film being transmitted from 20:15 to 22:10 by the SAT station on program position 1.
Press this key on the remote
The screen displays
Explanation
control
MENU
TV
?
return
TV picture
Help
If no timer recordings have been programmed pre-
viously, this table is empty. Any previously program-
med settings will be displayed.
1. Call the menu „SAT timer
recording“
SAT Timer recording
Sat-Prog
date
Time of day
VPS
The timer menu requires the time of day and the date.
The time of day is taken from Megatext and the date
from the VPS signal. Note that some stations do not
transmit Megatext and/or VPS signals.
MENU
- -
—
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
If there is no station with VPS and/or
Megatext stored in program position 01,
the time and/or date cannot be set auto-
matically and must be entered manually.
AV
enter date
11.12
14:20
6 9 6 + S 0 9 A - G B
2. Enter the data for the pro-
gram to be recorded (see
example)
MENU
Two digits must be entered for each position of the
time and date, e.g. 01.09 for September 1st and 09:00
for 9 AM.
TV
?
return
TV picture
Help
SAT Timer recording
If you make a mistake while entering the data, the entry
Sat-Prog
date
Time of day
VPS
AV
in the current column or the entire line can be cleared
1
4
7
2
5
8
0
3
6
9
1 ARD
—
12.12
20:15
22:10
—
—
—
—
—
—
—
—
—
—
yes
—
—
—
—
—
—
—
—
—
-/--
with the
key. The entire line can be cleared only if
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
—
the key symbols in the top line are displayed in color.
—
—
—
—
If the childlock is active, you cannot
execute a SAT timer recording.
—
—
—
enter date
11.12
14:20
6 9 6 + S 0 9 B - G B
If the TV set is not receiving a VPS signal when you are
3. Store the programmed data
and return to the TV picture
or to standby mode
MENU
TV
?
return
TV picture
Help
programming it, a VPS signal can be set manually with
AV
the
key. If you have programmed a timer with VPS
SAT Timer recording
and switched the TV set to standby mode, a TV set
with 7-segment display will display „SCAn“ about
one hour before the programmed start time to indicate
that it is scanning for the VPS start signal.
Sat-Prog
date
Time of day
VPS
AV
1 ARD
- -
12.12
20:15
22:10
—
—
—
—
—
—
—
—
—
—
yes
—
—
—
—
—
—
—
—
—
OK
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
If desired, the timer recording can be terminated
at any time as described in section 8, step 3.
or
TV
The same data for the time of day and date must
be programmed into the video recorder on the AV
program position or on a program position on
which the video recorder does not receive a TV
station. An MVS system (optional extra) does this
automatically.
enter date
11.12
14:20
6 9 6 + S 0 9 C - G B
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming radio stations
10. SAT Radio Operation
Many SAT stations use so-called „sound subcarriers“ to transmit additional radio programmes. One SAT station can transmit several
additional radio programmes. Some radio stations are already programmed in the factory (see the SAT station table, „ASTRA radio
stations“). These can be assigned to programme positions with the aid of the menu „SAT programming“ (see Section 1).
Proceed as follows if you wish to programme a new station that is not listed in the SAT station table.
Example: You want to programme the SAT radio station „NDR 2“ (frequency 11.582 MHz, polarisation horizontal, sound subcarriers
7.38/7.56 MHz).
(For station parameters please also refer to the teletext information).
Press this key on the remote
The screen displays
Explanation
control
1. Select a SAT radio program
position and set the LNC
supply
In this menu, you must first set the polarisation for the
desired station.
MENU
TV
?
return
TV picture
Help
TV station table
In our example, the station NDR 2 uses horizontal
polarisation.
Red station
table
Blue SAT
radio table
LM
-
The polarisation can be selected with the
keys.
0
1
2
3
4
5
6
7
8
9
Videorec.1
Aerial
Aerial
VTR1
ARD
ZDF
The 22 kHz signal must be set to match the satellite
being used, as described in step 3 on page 10.
R
LNC pwr supply:
H
22 kHz signal:
On/Off
Polarizer:
2
AV
Relay:
On/Off
If the station table with the blue hea-
der line now appears, see the instruc-
tions for Step 3.
AFC:
On/Off
2x
red
Std, Pict., Sound
6 9 6 + S 0 4 H - G B
-
3
SAT 1
Std channel
40
Aerial
The SAT radio station „NDR 2“ is a sound subcarrier of
the TV station „Nord 3“ and is transmitted by the
ASTRA satellite on the frequency 11.582 GHz.
44
45
46
47
48
49
Spec. channel
SAT-TV
2. Enter the station frequency
AV
H: 11,582 Nord3
SAT-RADIO
Aerial control
Back to the example:
MENU
Enter 1 5 8 2 on the numerical keys.
After you have entered the frequency, the TV program
from the station „N3“ appears behind the menu on the
screen.
SAT-Frq.
Aerial control
H: 11,583 Nord 3
2
5
8
1
696+S11E1-GB
The menu for frequency input may differ, depending
on the model, as shown in the picture.
In the submenu SAT sound settings, you can set all
sound parameters required for a SAT radio station.
MENU
TV
?
return
TV picture
Help
3. Call the submenu „SAT
sound settings“ and set the
sound mode
TV station table
Red station
table
Blue SAT
radio table
These settings apply only to the currently selected
program position.
Program
LM
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
MENU
MENU
—
You can also select the sound mode in this menu. The
possible settings are MONO, STEREO and DUAL (for
dual-channel transmissions).
Sound mode:
Stereo
Channel 1:
7.02 MHz
7.20 MHz
130 kHz
PANDA
red
Channel 2:
AV
Band width:
Deemphasis:
Logo, Channel, Signal
6 9 6 + S 1 0 C - G B
-
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming radio stations
10. SAT Radio Operation
Press this key on the remote
control
The screen displays
Explanation
NDR 2 uses the sound subcarrier frequencies 7.38
MHz and 7.56 MHz. The most commonly used sound
subcarrier frequencies can be selected by pressing
the numerical keys, to which the following frequen-
MENU
TV
?
return
TV picture
Help
Help
Help
4. Set the sound subcarrier
frequency for radio
TV station table
Program
LM
1
cies are assigned2:
4 6,20 MHz 56,50 MHz
7 7,02 MHz 87,20 MHz
3
6
9
6,65 MHz
7,38 MHz
7,92 MHz
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
7,56 MHz
07,74 MHz
8,10 MHz
Sound mode:
Stereo
Channel 1:
7.02 MHz
7.20 MHz
130 kHz
PANDA
-
You can also adjust the frequency in steps of 10 kHz in
the range 5.00 MHz to 9.99 MHz with the aid of the
Channel 2:
-
AV
Band width:
Deemphasis:
keys. In the case of stereo stations, the frequency for
sound channel 2 changes automatically as the frequency
for sound channel 1 is adjusted, since these frequencies
are always 180 kHz apart. After adjusting sound channel
Logo, Channel, Signal
696+S10D-GB
1, you can then adjust sound channel 2 if necessary
.
MENU
TV
?
return
TV picture
5. Set the „Bandwidth“
The preset default bandwidth for MONO stations is
280 kHz, while the default for STEREO and DUAL stati-
ons is 130 kHz.
TV station table
Program
LM
AV
These bandwidths are normally sufficient.
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
Note: always select 130 kHz for ASTRA sub-
carriers.
ꢀ
Sound mode:
Stereo
Channel 1:
7.02 MHz
7.20 MHz
130 kHz
PANDA
If the sound is distorted, try adjusting the bandwidth to
obtain better reception.
-
Channel 2:
AV
Band width:
Deemphasis:
Logo, Channel, Signal
6 9 6 + S 1 0 E - G B
The deemphasis (a method used to reduce noise in the
sound channel) improves the quality of the sound
received from a SAT station.
MENU
TV
?
return
TV picture
6. Set the „Deemphasis“
TV station table
You can select one of the following settings:
•Off • 50µs •75 µs •J17 •PANDA
Program
LM
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
red
Note:for ASTRA subcarriers, always select
PANDA.
ꢀ
Sound mode:
Stereo
When you switch between MONO, STEREO and DUAL,
the bandwidth and de-emphasise are automatically
switched to the appropriate default values. Values for
other settings can be found in the related tables in tra-
de magazines.
Channel 1:
7.02 MHz
7.20 MHz
130 kHz
PANDA
-
Channel 2:
AV
Band width:
Deemphasis:
Logo, Channel, Signal
6 9 6 + S 1 0 F - G B
Once the settings have been stored and the menu
cleared, the picture tube is switched off.
7. Store the settings and close
the menu
OK
TV
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming ADR
radio stations
11. SAT-ADR Radio Operation
The ASTRA satellites also transmit ADR (ASTRA Digital Radio) programmes. The digital transmission of speech and music permits high-
quality reception because the signals are not subject to interference. Some ADR stations are already programmed in the factory (see the
SAT station table „ASTRA ADR radio stations“). These stations can be programmed in the menu „SAT programme assignments“ (see Sec-
tion 1) if your TV set is equipped with the ADR upgrade kit.
Proceed as follows if you wish to programme a new station that is not listed in the SAT station table.
Example: You want to programme the SAT ADR station „hr 3“ (frequency 11.494 MHz, horizontal polarisation, sound subcarrier 7.92 MHz). (See
teletext).
Press this key on the remote
The screen displays
Explanation
control
In this menu, you must first set the polarisation for the
desired station.
1. Select a SAT-ADR radio pro-
gram position and set the
LNC supply
MENU
TV
?
return
TV picture
Help
TV station table
In our example, the station „hr 3“ uses horizontal pola-
risation.
Red station
table
Blue SAT
radio table
LM
-
The polarisation can be selected with the
keys.
00
06
34
0
1
2
3
4
5
6
7
8
9
Videorec.1
Aerial
Aerial
VTR1
ARD
ZDF
The 22 kHz signal must be set to match the satellite
being used, as described in step 3 on page 10.
R
LNC pwr supply:
H
22 kHz signal:
On/Off
Polarizer:
2
If the station table with the blue hea-
der line now appears, see the instruc-
tions for Step 3.
AV
Relay:
On/Off
AFC:
On/Off
2x
red
Std, Pict., Sound
6 9 6 + S 0 4 H 1 - G B
-
3
SAT 1
Std channel
40
Aerial
The SAT radio station „hr 3“ is a sound subcarrier of
the TV station „ARD“ and is transmitted by the ASTRA
satellite on the frequency 11.494 GHz.
44
45
46
47
48
49
Spec. channel
Fine tuning
SAT-Frq.
2. Enter the station frequency
MENU
AV
H: 11,494 ARD
Back to the example:
Aerial control
Enter 1 4 9 4 on the numerical keys.
After you have entered the frequency, the TV program
from the station „ARD“ appears behind the menu on
the screen.
SAT-Frq.
Aerial control
H: 11,494 ARD
The menu for frequency input may differ, depending
on the model, as shown in the picture.
4
4
9
1
696+S11E2-GB
3. Call the sub-menu „SAT
sound settings“ and set the
sound transmission method
MENU
?
If your TV set is equipped with an ADR upgrade kit, it
will ask you to select either ADR or FM as the sound
transmission method.
TV
return
TV picture
Help
Radio station table
Red station
table
Blue SAT
radio table
ADR/FM is displayed only if an ADR program
position was selected in Step 1.
Sound
Program
Pict.
Std.
—
—
—
—
Auto.
Auto.
Auto.
Auto.
ADR
ADR
ADR
ADR
R
R
R
R
R
R
BREM2
SR1
NDR 2
NDR 4
40
41
42
43
44
45
46
47
48
49
ADR must be selected for digital sound transmission
(possible only with the ADR upgrade kit).
MENU
MENU
Volume adjustm. +00
Muting
Adj. SAT sound
ADR / FM
FM is selected for analogue sound transmission
(normal radio).
ꢀ
red
Off
AV
ADR
When this menu line is active, you can switch between
-
ADR and FM with the
keys.
Std. Pict., Sound
AV
ADR must be selected for an ADR station.
6 9 6 + S 1 1 B - G B
-
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming ADR
radio stations
11. SAT-ADR Radio Operation
Press this key on the remote
control
The screen displays
Explanation
MENU
TV
?
In this menu, you can set all parameters which are
needed for a SAT-ADR station.
return
picture
Help
4. Call sub-menu „SAT sound
settings“ and set the sound
mode
Radio station table
These settings apply only to the currently selected
programme position.
Program
Std.
Pict. Sound
You can select either STEREO, MONO A or MONO B
mode.
40
41
42
43
44
45
46
47
48
49
BREM2
ADR
-
Auto.
Auto.
Auto.
Auto.
SR1
-
-
-
ADR
ADR
R
NDR2
ASTRA DIGITAL RADIO
Sound mode
Stereo
MONO A/B: you can select one of two MONO stations
Sound subcarrier 7,92 MHz
transmitted on the selected subcarrier.
hr3
Pop music
Logo, Channel, Signal
6 9 6 + S 1 1 C - G B
MENU
TV
?
As shown in the station table, „hr 3“ uses the sound
subcarrier frequency 7.92 MHz.
return
picture
Help
5. Set the sound subcarrier
frequency for radio
Radio station table
The most commonly used sound subcarrier frequen-
cies can be selected by pressing the numerical keys,
to which the following frequencies are assigned:
Program
Std.
Pict. Sound
_
40
41
42
43
44
45
46
47
48
49
BREM2
SR1
ADR
Auto.
Auto.
Auto.
Auto
_
ADR
1
2
3
46,12 MHz 5 6,30 MHz 6 6,48 MHz
_
NDR2
ADR
_
76,66 MHz 8 6,84 MHz 9 7,74 MHz
7,92 MHz
8,28 MHz
R
ASTRA DIGITAL RADIO
0 8,10 MHz
8,46 MHz
Sound mode
Stereo
Sound subcarrier 7,92 MHz
hr3
You can also adjust the frequency in steps of 10 kHz in
Pop music
the range 5.00 MHz to 9.99 MHz with the aid of the
-
keys.
Logo, Channel, Signal
6 9 6 + S 1 1 D - G B
Once the settings have been stored and the menu
cleared, the picture tube is switched off.
6. Store the settings and close
the menu
It can be switched on again to display the station logo
Astra-Digital-Radio
TV
by pressing the
key.
Stereo
Pr 27
13:30:58
The info-box which is then displayed shows the pro-
gramme position, the sound mode, the time, the stati-
on name and the type of programme.
Sender:
SWF 3
Programmart:
Popmusik
OK
TV
Titel des Liedes
Interpret oder andere RDS-Infos
This info-box can be displayed and cleared with the
ADR-Window
TV
key, which also switches the picture tube on and
off.
The white box displays the radio text.
This is transmitted by some stations and provides
additional information such as the title being played
and name of the artist.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Technical Data
✍
RF input range, F-socket input
Input frequency range
Input impedance:
950 . . .2050 MHz
75 Ω
Video:
Gain adjustable
Frequency range
-3 . . .+4dB
20Hz . . .5,5 MHz
SAT signal also available at the SCART socket while viewing
terrestrial programs.
Sound:
Sound carrier frequency:
Stadardized carrier frequencies are pre-programmed.
MONO / DUAL / STEREO
5,00 . . . 9,99 MHz
Channel bandwidth:
130KHz / 180 KHz / 280 KHz / 380 KHz
Deemphasis: 50 µs, 75 µs, J 17 and PANDA
Power consumption
• of the SAT module: max. 16 W
Timers
8 timers can be programmed up to two months in advance.
Aerial control
LNC voltages:
12 V . . . 19 V „Off“
22 kHz signal On / Off
On / Off
Relay supply:
Polarizer control current
- 60mA . . .+60mA
All settings can be stored individually for each program position
with the aid of menus.
The power supply sources are short-circuit proof and switch off
if the load is too high. They are switched on again when the
overload is removed. See also the Alignment Instructions.
13. Accessories
• Aerial positioner connection cable
7928-2 Order No. 879 28 02
• SAT-adapter (polarizer / relay)
6228-1 Order No. 862 28 01
25
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Program position management for SAT stations
If a TV set with 225 program positions is fitted with a SAT upgrade kit 081 NB 1010 or 083 NB 1018, a separate operating level for SAT
radio stations is added to the menus.
The number of TV stations which can be stored in the TV station table then depends on the number of SAT radio stations stored in the radio
station table and vice versa.
Basically, the TV set offers:
•
•
•
225 program positions exclusively for TV stations and no program positions for radio stations
or
33 program positions for TV stations and 256 program positions for radio stations
or
a variable combination of the two, as shown in the table below.
TV station table
SAT radio station table
Red header
Press the „R“ key to switch between
Blue header
the two station tables.
TV station table
SAT radio station table
Prog.
LM
Logo
Frequ.
Signal
Frequ.
—
Prog. Logo
LM
Sound Sign.
AV
0
1
2
3
4
5
6
6
7
8
—
ARD
ZDF
Bayern 3
Nord 3
MDR 3
West 3
RTL 2
SuperRTL
VOX
>> further settings
Std., Pict., Sound,
—
—
Antenne
Antenne
Antenne
Antenne
Antenne
Antenne
Antenne
Antenne
Antenne
0
1
2
3
4
5
6
7
8
9
—
—
—
—
—
—
—
—
—
—
—
—
11.494
10.964
11.143
11.582
11.112
11.053
11.216
11.391
11.273
11.495 Stereo
11.582 Stereo
11.582 Stereo
11.464 Stereo
11.053 Stereo
11.053 Stereo
11.112 Stereo
11.214 Stereo
11.347 Stereo
SWF 3
7
8
0
9
NDR 2
NDR 4
N-JOY
EinsLive
WDR 2 D
MDR SPUT
AntBayrn
DLF
R
TIMER
P
+
Progr. type
ľľ
ıı
-
6 9 6 + S 1 0 H - G B
6 9 6 + S 1 0 G - G B
OK
P
-
ı
TV
MENU
ı
Number of
Number of
TV program positions:
program positions for
SAT radio stations
225 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 000
200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 033
175 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 066
150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
075 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
033 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
Intermediate values not shown in the table can be calculated with the
following formula:
3600 - ( nTV x 16 )
= n Radio
12
(n = number of stations)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Quality – A matter of
principle.
With the trend-setting Metz technology
you will allways make the correct choice.
See your Metz dealer.
He will be happy to demonstrate the
Televisions sets
Video recorders
Camcorders
mecablitz electronic
flashguns
Metz-Werke GmbH & Co KG
Postfach 2035, D-90710 Fürth
Availability and technical
details subject to change
without notice
Printed in Germany
696 47 2037
ķ
Always first class!
Download from Www.Somanuals.com. All Manuals Search And Download.
|