LIMITED ONE YEAR WARRANTY
This warranty shall be in effect for a period of one year from the date of the first
consumer purchase. This warranty is valid during the warranty period providing that proof
of date of purchase from an authorized dealer is presented whenever warranty service is
required.
To receive service for this product return it to the Metrik dealer from whom it was
purchased and such dealer will arrange for service. If shipment of the product is required,
it should be packed securely. The original dated bill of sale, or a legible copy, must be
included with the product as proof of warranty coverage.
Metrik will pay for all labor and material expenses required to repair the product, only.
Labor expense for the removal and installation of the product is the sole responsibility of
the consumer. If the product is shipped, the consumer must prepay the initial shipping
charge to us; Metrik will pay the return shipping charges to the consumer.
Except as otherwise specified, this warranty covers all defects in material and
workmanship. The following are not covered: damage resulting from accident, misuse,
abuse, neglect, product modification, improper installation, incorrect line voltage,
unauthorized repair or failure to follow instructions supplied with the product, damage
occurring during shipment (claims must be filed with the carrier), elimination of car static
or other electrical interferences, any product purchased outside of North America or on
which the serial number has been defaced, modified or removed.
MCD-476
All implied or statutory warranties and conditions, including warranties or conditions of
merchantability, fitness for particular purposes and non-infringement are limited in
duration to the length of this warranty.
Metrik's liability is limited to the repair or replacement, at our option, of any defective
product and shall not include incidental or consequential economic damages of any kind.
Some states or provinces have differing limitations. This warranty gives you specific rights
and you may also have other rights, which vary depending of the state or province in which
you reside.
AM/FM RADIO
CD PLAYER WITH ESP ANTI-SHOCK,
4 CHANNEL HIGH POWER CAR AUDIO SYSTEM
METRIK MOBILE ELECTRONICS
a division of SAMSON ELECTRONICS, INC.
3400 E. SLAUSON AVE.; MAYWOOD, CA 90270
TOLL FREE: 866-572-6766
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
HANDLING COMPACT DISCS
MOISTURE CONDENSATION
On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit.
Should this occur, the unit will not operate properly. Insuch a case, remove the disc and wait
for about an hour until the moisture has evaporated.
NOTES ON CDS
NOTES ON DISCS
P r o b l e m
C a u s e
A c t i o n
1. Adirty or defective disc may cause sound
dropouts while playing. Toenjoy optimum
sound, handle the disc as follows.
Handle the disc by its edge. Tokeep the disc
clean, do not touch the surface(P.1)
If you use the discs explained below, the
sticky residue can cause the CD to stop
spinning and may cause malfunction or ruin
your discs.
Do not use second-hand or rental Cds that
have a sticky residue on the surface (for
example, from peeled-offstickers or from
ink, or glue leaking from under the stickers).
There are paste residue.
Yellow wire not connected or incorrect voltage
Red wire not connected or incorrect voltage
Black wire not connected
Check connections for proper voltage
(11-14.4VDC)
Check connection to ground
Unit will not turn on
(no power)
Fuse blown
Replace fuse
Speaker wires not connected
Check connections at speakers
Unit has power
(but no sound)
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from
each other and chassis ground
P.1
Ink is sticky (P.5).
2. Do not stick paper or tape on the disc (P.2)
Yellow or red wire touching chassis ground
Check for pinched wire
P.5
Do not use rental Cds with old labels that
are beginning to peel off.
Unit blows fuses
Excessive skipping
Speaker wires touching chassis ground
Incorrect fuse rating
Check for pinched wire
P.2
Use fuse with correct rating
Stickers that are beginning
to peel away, leaving a
3. Do not expose the discs to direct sunlight or
heat sources such as hot air-ducts, or leave
them in a car parked in direct sunlight where
there can be a considerable rise in
Unit is not mounted correctly or back strap is
not secure
Check mounting sleeve and back strap
support
sticky residue (P.6).
P.6
Physical defect in media(CD)
Do not use your Cds with labels or stickers
attached.
Check media for scratches
temperature inside the car (P.3).
Labels are attached (P.7).
P.7
P.3
Do Not Use Special Shape Cds
4. Before playing, clean the discs with an
optional cleaning cloth. Wipe each disc from
the centre out (P.4).
Be sure to use round shape Cds only for
this unit and do not use any special shape
Cds. Use of special shape Cds may cause
the unit to malfunction.(P.8).
P.8
P.4
Be Sure to use Cds with disc mark
5. Do not use solvents such as benzine,
thinner, commercially available cleaners, or
antistatic spray intended for analog discs.
DIGITAAL AUDIO
DIGITAAL AUDIO
DIGITAAL AUDIO
RECORDABLE
RECORDABLE
Only for this unit.
CD-Rs and CD-RWswhich have not undergone finalization processing cannot be played.
(For more information on finalization processing, refer to the manual for your CD-R/
CD-RW writing softwareor CD-R/CD-RW recorder.) Addition software or depending on
the recording status, it may prove impossible to play certain Cds record on CD-R or CD-RW.
8
1
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION GUIDE
BUTTON FUNCTION
RDM
Preparation
Please read entiremanual before installation.
When no trackis playing, press“RDM” to shuffle,the word “RND”will displays onLCD screen
and blinking. Press selects a track. Press STOP cancels the shuffle and stop playing a
track.
Before You Start
Disconnect negative battery terminal.(consult a qualified technician for instructions)
Avoid installing theunit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
PRO
When no trackis playing, press“PRO” to setupa play list, while “O” isblinking on LCD, press
navigates to thedesired track andpress “PRO” againto save thattrack into theplay list. Then
the screen backto blinking, keeprepeating previous procedureto save thedesired track into
the play list. A play list maximumcan save 20tracks. Once aplay list reachesthe maximum,
the screen displays“ -- ”. Press “STOP” tostop programming playlist. Press “PRO” again,
back to theplay list, navigatesto the desiredtrack; press “MOD”or “PWR” todeletes the track
from the playlist. Press “PLAY” to playthe play list. While playing aplay list, press“REP” to
play a trackrepeatedly.
Getting Started
Remove 2 transitscrews located
on top ofthe unit.
Insert the suppliedkeys into the
slots as shown, and slide theunit
out of themounting sleeve.
SECURITY
LED
Install mounting sleeveinto
Opening, bending tabsto secure.
Connect wiring harnessand
antenna.(consult a qualified
technician if youare unsure)
Certain vehicles mayrequire an
installation kit and/orwiring
harness adapter(sold separately).
Testfor correct operationand slide
into mounting sleeveto secure.
Snap trim ringinto place.
T-UP/DOWN
Press“
”go tonext song, press“
”go to previoussong.
” fast backward.
KEYS
Long press “
” fast forward, long press “
TUNE
HEX NUT
When is onradio mode, rotatethe TUNE buttonleft/right to turnthe station.
PLAIN WASHER
OPEN
MOUNTING STRAP
Press the OPEN to allow the front panel to detachable panel.
SPRING WASHER
TAPPING SCREW
EJECT
Press EJ toreject a CDfrom the cartridge, the CD cartridgewill automatically closeonce we
push the cartridgeor wait for10 seconds. Longpress EJ forceto reject theCD from allmodes.
HEX BOLT
CD Switch Between Modes
The product hastwo modes: CDmode and Radiomode. Switch betweentwo modes asfollow:
MOUNTING SLEEVE
A: Switch fromRadio Mode toCD Mode
1)Under Radio Modeinsert CD
2)Press MOD, switchto CD Mode
3)Start reading CD, displays total numberof tracks inLCD
4)Press PLAY, start toplay
B: Switch fromCD Mode toRadio Mode
Under CD Modepress MOD toswitch to RadioMode
Remarks: Must PressPLAY to play thetrack
2
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BUTTON FUNCTION
WIRING INSTRUCTION
BAND
Press BAND button to switch between FM/AM.
Speakers Connection
This unit can mate with 4 as well as 8 speakers .Make sure
Power is off before connecting.
STOP
Press STOP to stop playing a track.
Caution:
Do Not Short speaker wires to chassis ground . It may cause severe
damage.
REP
Press REP playsa track repeatedly; long press REPplay all tracks repeatedly.
PLAY
Ground Connection
Connect Black Wire to Ground terminal. If not found, connect it to
the chassis instead.
Press PLAYto play firsttracks from CD. While it isplaying a track, press PLAYto pause/
resume the track, the word “PLAY” will displayson the screenand blinking.
DISP
Power Connection
Press DISP buttonto display time, long press the DISP button tosetup the time.
When the time blinks, press H/M button to set hour/minute; hold H/M to increase H/M
sequentially.
First connect the red Wire (w/3Amp fuse ACC) to ignition output.
battery power. Make sure no other device, such as switch, in between.
Then connect orange Wire(w/1 Amp fuse block) directly to +12v
POWER ON/OFF
Antenna Connection
Insert coaxial connector to antenna socket.
Press PWR toturn on/off thepower.
VOLUME
Caution:
When is on radio/CDP mode, turnthe VOL button clockwise to increase the volume, turn
anticlockwise to decrease the volume.
If a fuse is blown , only replace it with one of the sam e rating.
Other wise may cause severe damage . Repeated blown fuse indicates
potential problem(s) exists. A thorough inspection is recommended.
MODE
Press MOD toswitch to CDmode. If noCD inside thecartridge, the LCDshows “__”.
When you inserta CD intothe cartridge, itreads the CDautomatically, anddisplays
number of trackson LCD (Ifa CD isnot readable, itdisplays “E”).
CLOCK
1) Press DISPto display clock.
Long press DISPto setup the time, while it is blinking, press H/M press to adjust the time.
It will display the time, if you press DISPbutton again or left it for 5 seconds .
2) Press “H” once to increase one hour, long press to increase sequentially.
3) Press “M” once to increase one minute, long press to increase sequentially.
6
3
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING DIAGRAM
CONTROL LOCATIONS
CONNECTIONS
ANTENNA
SOCKET
17
16
1
RED
R
GRAY
RCA OUT
WHITE
L
B1:VIOLET + (RR)
A
2
B
B2:VIOLET/BLACK - (RR)
B3:GRAY + (RF)
A4:RED ACC
1
3
5
7
2
4
6
8
1
3
5
7
2
B4:GRAY/BLACK - (RF)
B5:WHITE + (LF)
A5:BLUE ANTENNA
A7:YELLOW B+
A8:BLACK GND
4
6
8
B6:WHITE/BLACK - (LF)
B7:GREEN + (LR)
3
4
15
B8:GREEN/BLACK - (LR)
Right Front
Gray/Black(-)
Gray(+)
5
YELLOW
B+
3A
1A
Right Rear
Violet/Black(-)
Violet(+)
BLUE
RED
ANTENNA
POWER
ACC
Left Rear
Green/Black(-)
Green(+)
BLACK
GND
Left Front
White/Black(-)
White(+)
12
10
13
14
6
9
7
8
10
11
SPECIFICATIONS
BAND
STOP
1
2
3
4
HOUR
CD PLAYER
Frequency response:10HZ-20KHZ
Channel separation @1KHZ:>65dB
D/A converter:1Bit
11
12
RDM
PRO
S/N:
60dB
REP
FM TUNER
Tuning range:87.5MHZ-108MHZ
Usable sensitivity:20dBu
PLAY
13 T-DOWN
Stereo separation @1KHZ:30dB
Frequency response:50HZ-10KHZ
DISP
5
6
7
8
9
14
T-UP
POWER
AM TUNER
GENERAL
Tuning range:520KHZ-1600KHZ
Usable sensitivity:40dBu
Frequency response:50Hz-3KHz
15
16
TUN
VOLUME
OPEN
Power output:7W 4 @ 4ohms,14.4 VDC
Operating voltage:11-14.4VDC, negative ground
Speaker output impedance:4~8ohms
Line output voltage:200mv-400mv
MODE
17 EJECT
MINUTE
Dimensions:7 ” 7 ”
2 ” (178 178 51mm)
Design and specificationssubject to changewithout notice
Superior disc readingability: Ableto read CD
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|