INSTALLATION INSTRUCTIONS FOR PART 95-7866B
APPLICATIONS
ACURA MDX 2001-2006
95-7866B
KIT FEATURES
• Double DIN Head Unit Provision
• ISO Stacked Head Unit Provision
• Painted Matte Black to Match Factory Dash
KIT COMPONENTS
A) Double DIN Radio Housing • B) DDIN Brackets (To hold Display above radio)
B
A
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• 70-1721 Honda harness - 1998-up
• 40-HD10 -Honda antenna adapter- 2005-up
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Wrench
1-800-221-0932
© COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
95-7866B DASH DISASSEMBLY
ACURA MDX 2001-2006
A
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
2
3
Unclip and remove trim panel around
radio/display including a/c vents.
(Figure A)
Remove (6) mounting screws and
remove the audio/display unit from
the dash. (Figure B)
4
Remove (8) screws from the audio
unit and (4) screws from the display
unit and remove the brackets from
the audio/display assembly.
Continue to kit preparation.
B
1
Download from Www.Somanuals.com. All Manuals Search And Download.
95-7866B KIT PREPARATION
DISPLAY UNIT ASSEMBLY
*Note: Refer also to the instructions included with the aftermarket radio.
A
Using the mounting screws from the
display unit, attach the brackets
supplied with the kit by aligning the
guide pins on the display with the
holes on the brackets. (Figure A)
1
2
Align guide pins on bottom of display
unit with holes on top of housing and
attach the unit to the housing using
the (2) screws previously removed.
(Figure B)
Continue to kit assembly.
B
2
Download from Www.Somanuals.com. All Manuals Search And Download.
95-7866B KIT ASSEMBLY
DOUBLE DIN HEAD UNIT PROVISION/
ISO STACKED HEAD UNIT PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
A
1
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure A)
3
Reassemble dash in reverse order of
disassembly.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
95-7866B
NOTES
4
Download from Www.Somanuals.com. All Manuals Search And Download.
95-7866B
NOTES
5
Download from Www.Somanuals.com. All Manuals Search And Download.
95-7866B INSTRUCTIONS
1-800-221-0932
REV. 08/24/09 © COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION INST99-7866B
Download from Www.Somanuals.com. All Manuals Search And Download.
|