HAMMERS
Download from Www.Somanuals.com. All Manuals Search And Download.
62 |
HAMMERS
LET THE MACHINE DO THE WORK.
Metabo has one of, if not the widest SDS hammer range blows allowing the user to effortlessly drive the bit or
in the market. Our hammers hit hard and are perfect for chisel into masonry. Metabo hammers are versatile,
working in hard materials such as stone or concrete. The robust, ergonomic, powerful and reliable, all properties
pneumatic hammer mechanism generates high-energy that the trade demands.
Control indicator
Vario Tacho Constamatic
(VTC) electronics
allow you to set the right
speed for the application and
then maintain that speed,
even under heavy loading.
Metabo “Quick“
drill chuck change
– hammer chuck for SDS
drilling and chiselling
LED light flashes warning
of thermal overload, carbon
brush wear or no-volt release
switch activation.
Rubber-coated handle
a comfortable, secure
grip.
– Quick-action keyless chuck
for drilling and screw-driving
Metabo S-automatic torque limiting clutch
Prevents sudden reverse kick back if a disc or
bit should jam in the work piece - protecting
machine and user.
Marathon motor
with coil guard
Expertly machined and
balanced motors use high
grade coppers and steels,
increase efficiency and pro-
vide optimum performance.
Thick resin coatings on the
armature and field coil pro-
tect the motor from harmful
debris, increasing service life.
Die cast aluminium gear housing
Metal gear housings ensure
optimum integral machine
strength and maximum heat
dissipation which aids motor
cooling and prolongs service life.
Infinitely variable
speed control
Always the right speed.
Depending on the
workpiece and the
material.
More intelligent drilling with
Metabo “Contact”
The tool stops automatically
as soon as the drill tip touches
a conductive, earthed material
(only in KHE 26 Contact).
Protection against theft
by Metabo CODE!
The electronic security system
protects against theft and
unauthorised use.
More relaxed working due
to ergonomics
Ideal adaptation of the design
to the user’s needs enables
safe, comfortable and fatigue-
free work.
Optimised hammer mechanism
The already tried and tested
Metabo hammer mechanism
has been adapted for the
Marathon motor and even
further improved. This ensures
maximum drilling performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
64 |
HAMMERS
Which is the right rotary hammer for you?
Drilling in
Metal Wood
max. Ø mm
Hammer drilling in concrete/stone (Ø mm)
Chiselling
Type and
output
Versions Page
4
5
8
10 12 14 16 18 20 22 24 26 28 30 32 35 40 45 50
Opens easily
heavy
Cordless hammers
BHA 18
1,6 J
10
22
22
–
–
66
NEW
13
66
KHA 24
2,2 J
CODE!
Multihammers
13/8
16/8
30/20
1./2. gear
UHE 22 Multi
68
68
2,2 J
40/20
1./2. gear
UHE 28 Multi
CODE!
2,4 J
Rotary hammers
BHE 20
Compact
1,6 J
10
20
–
–
69
NEW
BHE 20
IDR
1,6 J
10
20
30
–
–
–
–
69
70
BHE 22
1,8 J
13
13
13
BHE 24
2,2 J
30
40
–
–
–
–
70
70
BHE 26
2,3 J
CODE!
Combination hammer
KHE 26
2,3 J
13
13
40
40
71
71
CODE!
KHE 26
Contact
2,3 J
KHE 28
2,5 J
13
16
40
40
71
72
CODE!
CODE!
KHE 32
3,5 J
NEW
KHE 56
14 J
–
–
–
72
73
KHE 75
10 J
–
CODE!
NEW
–
KHE 96
27 J
–
73
Chipping hammers
NEW
–
MHE 56
14 J
–
–
74
74
Suitable only to
a limited extent
Application is possible
Application optimal
ideal range
NEW
–
MHE 96
27 J
possible range
Download from Www.Somanuals.com. All Manuals Search And Download.
| 65
CORDLESS HAMMERS
COMMON FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Suitable for bits and accessories with SDS-plus shank end
With the appropriate accessories, it is also suitable for bits and
accessories with cylindrical shank end (no impact)
Pneumatic high-performance hammer mechanism
Hammer stop
Light and fast
Favourable centre of gravity position
Clockwise and anticlockwise rotation
Easy and quick change of battery pack
Metabo VibraTech (MVT): Active or passive vibration damphing
system help reduce the risk of developing vibration white finger
and increase use safety and comfort
ꢀ
ꢀ
ꢀ
ꢀ
... with the
Metabo CODE!
The electronic
security system
protects against
theft and unaut-
horised use.
... 40%
more output with
40% less weight
BHA 18
KHA 24
NEW
18 Volt
Cordless Rotary Hammer
BHA 18
24 Volt
Cordless Combination Hammer
KHA 24
Special advantages
ꢀ
The handy lightweight within the 18 Volt class
Die cast aluminium gear housing
Sheathed die cast aluminium gear housing
Rotation stop for chiselling
Variospeed (V) electronics
Vario Tacho Constamatic (VTC) füll-wave electronics
Metabo S-automatic torque limiting clutch
ꢁ
ꢁ
ꢁ
ꢁ
ꢀ
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Torque limiting clutch
Rubber-coated handle
ꢁ
ꢁ
ꢀ
ꢀ
Carrying belt
ꢁ
ꢁ
ꢀ
Maximum system flexibility through free combination of
chargers and battery packs (within a voltage class)
ꢀ
Metabo CODE! system
With "AIR COOLED" super quick charger ASS 15 Plus for
ꢁ
ꢁ
ꢀ
charging NiCd, NiMH and Li-Ion battery packs; with refresh
function; charge time approx. 25 minutes (at 2.0 Ah)
Comparative device characteristics
Drilling capacity in
- Concrete
18 mm
10 mm
20 mm
13 mm
- Steel
- Softwood
22 mm
22 mm
No load speed
0 - 1.100 /min
4.900 /min
1,6 J
SDS-plus
2,9 kg
0 - 1.000 /min
4.700 /min
2,2 J
SDS-plus
3,7 kg
Maximum impact rate
Maximum single-blow energy
Bit retainer
Weight (including Li-Ion battery pack)
Standard equipment
2 battery packs, Metabo VibraTech (MVT)
side handle, carrying belt, "AIR COOLED"
quick charger, carry case
2 battery packs, Metabo
VibraTech (MVT) side handle,
drilling depth guide, "AIR COOLED"
super quick charger, carry case
Battery packs and recharger are
found on pages 137/139
1) at nominal voltage, maximal voltage 20 Volts
2) at nominal voltage, maximal voltage 28 Volts
Type
BHA 18
KHA 24
Order no. Machine with
Battery pack
Charger
– NiCd (18 V/2 Ah)
AC 30
6.00218.50
–
– NiCd (24 V/2 Ah)
– Li-Ion (18 V 1)/2,2 Ah)
– Li-Ion (25,2 V 2)/2,2 Ah)
ASS 15 Plus
AC 30 Plus
ASS 15 Plus
–
6.00189.50
–
6.00190.50
6.00219.50
–
Download from Www.Somanuals.com. All Manuals Search And Download.
66 |
MULTIHAMMERS
The engineers of
power
A perfect rotary hammer. The P´ 7911. The result of cooperation
between Porsche Design and Metabo. Reduced to its main functions:
Drilling, hammer drilling and chiselling. With a housing made of
aluminium and carbon and revolutionary ergonomics. The ideal
combination of aesthetics and uncompromising quality.
Technical data – P´7911
1st gear/2nd gear
Maximum impact rate
Rated input power
Bit retainer
4,600 rpm
Drilling diameter in
705 W
–
–
–
concrete with hammer drills
steel
softwood
20 mm
10/6 mm
20/14 mm
SDS-plus
3.2 kg
Weight (without mains cable)
No-load speed
Torque
0 – 1,000 rpm/0 – 2,800 rpm
15 Nm/6 Nm
Scope of delivery: Hammer chuck for tools with SDS-plus
shank bit, keyless chuck for tools with cylindrical shaft,
additional handle, plastic case, 2 SDS-plus
[
]
Single-blow energy
2,0 Joule
hammer drills Ø 6 mm, 8 mm
ꢀ
Order no. 6.00911.00
porsche design
Multihammer
ß7911
Download from Www.Somanuals.com. All Manuals Search And Download.
| 67
MULTIHAMMERS
COMMON FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Suitable for bits and accessories with SDS-plus shank
end or cylindrical shank end (without impact)
Hammer stop
Rotation stop
Metabo "Quick" chuck change
Clockwise and anticlockwise rotation
Thumbwheel for preselection of speed
Pneumatic high-performance hammer mechanism
Die cast aluminium gear housing
Ergonomic housing design for fatigue-proof operation
Rubber-coated handle
Metabo S-automatic torque limiting clutch
Metabo winding protection grid
Auto-stop carbon brushes
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Robust Metabo Marathon motor
ꢀ
Two-speed gear unit
... with the Metabo CODE! The
electronic security system protects
against theft and unauthorised use.
CODE!
UHE 22 Multi
UHE 28 Multi
Multihammer
UHE 22 Multi
Multihammer
UHE 28 Multi
Special advantages
ꢀ
Metabo CODE! System: electronic anti-theft
system, activated by CODE! key (accessory)
Variospeed (V) electronics
Vario Tacho Constamatic (VTC) full-wave
ꢁ
ꢁ
ꢀ
ꢁ
ꢀ
electronics
ꢀ
Overload protection
No-volt release switch
Brush wear indicator
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
Comparative device characteristics
Torque
Drilling capacity in
- Concrete with hammer drill bits
- Masonry with TCT bits
- Steel
- Softwood
No load speed
Rated input power
Output power
15 Nm/6 Nm
22 mm
22 Nm/8 Nm
28 mm
80 mm
16 mm/8 mm
40 mm/20 mm
0 - 950 / 0 - 2.600 /min
1.010 W
13 mm/8 mm
30 mm/20 mm
0 - 1.050 / 0 - 2.900 /min
705 W
410 W
600 W
Rated load speed
Maximum impact rate
Maximum single-blow energy
Collar diameter
700/1.900 /min
4.800 /min
2,2 J
950/2.600 /min
4.400 /min
2,4 J
43 mm
43 mm
Bit retainer
SDS-plus
SDS-plus
Chuck capacity
Weight (without mains cable)
1,5 - 13 mm
2,7 kg
1,5 - 13 mm
2,8 kg
Standard equipment
Hammer chuck for tools with SDS-plus shank Hammer chuck for tools with SDS-plus shank
end, quick-action keyless chuck for tools with
cylindrical shank end, rubber-coated side
handle, drilling depth guide, carry case
end, quick-action keyless chuck for tools with
cylindrical shank end, rubber-coated side
handle, drilling depth guide, carry case
Type
Order no.
UHE 22 Multi
6.00693
UHE 28 Multi
6.00361
ꢀ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
68 |
ROTARY HAMMERS
COMMON FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Suitable for bits and accessories with SDS-plus shank end
With the appropriate accessories, it is also suitable for bits
and accessories with cylindrical shank end (no impact)
Hammer stop
Clockwise and anticlockwise rotation
Variospeed (V) electronics
Pneumatic high-performance hammer mechanism
Optimum weight distribution by L shape
Ergonomic housing design for fatigue-proof operation
Rubber-coated handle
Metabo VibraTech (MVT) handle for vibration damping
Metabo S-automatic torque limiting clutch
Scaffolding hook (accessory) for hanging the machine
on scaffoldings or ladders
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Sheathed die cast aluminium gear housing
design award
winner 2007
BHE 20 IDR
NEW
BHE 20
Compact
Electronic
Rotary Hammer
Accessories for BHE 20 Compact and BHE 20 IDR
BHE 20 IDR
BHE 20 Compact
Order no.
Special advantages
ꢀ
Removable dust extraction
ꢁ
unit (IDR extraction unit)
for dust-free drilling
Comparative
device characteristics
Torque
NEW
8 Nm
8 Nm
Drilling capacity in
- Concrete with hammer
drill bits
- Steel
- Softwood
No load speed
Rated input power
Output power
Rated load speed
Maximum impact rate
Maximum single-blow
energy
20 mm
20 mm
IDR extraction unit
Suitable for the rotary hammer BHE 20 Compact.
6.30591
10 mm
20 mm
0 - 1.000 /min
450 W
10 mm
20 mm
0 - 1.000 /min
450 W
ꢀ
ꢀ
As the extraction unit has its own motor,
output is independent of the speed of the
rotary hammer. Even at times when speed
is relatively low, when spot-drilling for example,
full dust extraction capacity is maintained.
150 W
150 W
800 /min
4.900 /min
1,6 J
800 /min
4.900 /min
1,6 J
ꢀ
Only for drilling with hammer drill bits
in concrete, stone or masonry. Not for use in
conjunction with chiselling.
ꢀ
The pleated filter can be removed without
tools for cleaning; thus ensuring
a long service life
Bit retainer
Weight (without mains cable)
SDS-plus
3,5 kg
SDS-plus
2,1 kg
ꢀ
The service life of the pleated filter can
be substantially prolonged if it is cleaned
with compressed air
The sealing cap on the extraction
nozzle and the moulded seal can be
exchanged without tools
Standard equipment
Hammer chuck
for tools with
SDS-plus shank
end, iDR extrac-
tion unit, metabo
Hammer chuck
for tools with
SDS-plus shank
end, metabo
ꢀ
VibraTech (MVT)
VibraTech (MVT) handle, carry case
handle, carry case
Drill bit Ø: 4 - 16 mm
Maximum drill length: 160 mm
Rated input power: 110 W
Weight: 1.400 g
Pleated filter IDR
6.30606
6.30607
6.30608
6.30609
6.30610
IDR moulded seal (2x)
Nozzle with sealing cap for IDR
Nozzle w. brush (IDR)
IDR sealing caps (5x)
Type
Order no.
BHE 20 IDR
6.00403
BHE 20 Compact
ꢀ
ꢀ
6.00402
Download from Www.Somanuals.com. All Manuals Search And Download.
| 69
ROTARY HAMMERS
COMMON FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Suitable for bits and accessories with SDS-plus shank end
With the appropriate accessories, it is also suitable for bits
and accessories with cylindrical shank end (no impact)
Hammer stop
Ergonomic housing design for fatigue-proof operation
Rubber-coated handle
Metabo S-automatic torque limiting clutch
Metabo winding protection grid
ꢀ
ꢀ
ꢀ
Clockwise and anticlockwise rotation
Auto-stop carbon brushes
ꢀ
Robust Metabo Marathon motor
ꢀ
Pneumatic high-performance hammer mechanism
ꢀ
Die cast aluminium gear housing
... with the Metabo CODE! The
electronic security system protects
against theft and unauthorised use.
CODE!
BHE 22
BHE 24
BHE 26
Electronic
Rotary Hammer
BHE 22
Electronic
Rotary Hammer
BHE 24
Electronic
Rotary Hammer
BHE 26
Special advantages
ꢀ
Metabo CODE! System: electro-
ꢁ
nic anti-theft system, activated
by CODE! key (accessory)
ꢀ
Metabo "Quick" chuck change
ꢁ
ꢁ
ꢁ
ꢁ
ꢀ
Variospeed (V) electronics
Vario Tacho Constamatic (VTC)
full-wave electronics
ꢁ
ꢀ
ꢀ
ꢀ
No-volt release switch
Brush wear indicator
ꢁ
ꢁ
Comparative device characteristics
Torque
11 Nm
11 Nm
16 Nm
Drilling capacity in
- Concrete with hammer drill bits
- Steel
22 mm
13 mm
24 mm
13 mm
26 mm
13 mm
- Softwood
30 mm
30 mm
40 mm
No load speed
Rated input power
Output power
0 - 1.000 /min
660 W
0 - 1.000 /min
705 W
0 - 1.000 /min
750 W
370 W
410 W
430 W
Rated load speed
750 /min
4.600 /min
1,8 J
SDS-plus
2,4 kg
750 /min
4.600 /min
2,2 J
SDS-plus
2,4 kg
1.000 /min
4.600 /min
2,3 J
SDS-plus
2,6 kg
Maximum impact rate
Maximum single-blow energy
Bit retainer
Weight (without mains cable)
Standard equipment
Hammer chuck for tools with
SDS-plus shank end,
rubber-coated side handle,
drilling depth guide, carry case
Hammer chuck for tools with
Hammer chuck for tools with
SDS-plus shank end,
rubber-coated side handle,
drilling depth guide, carry case
SDS-plus shank end, rubber-coated
side handle, drilling depth guide,
carry case
Type
Order no.
BHE 22
6.00242
BHE 24
6.00243
BHE 26
6.00336
ꢀ
ꢀ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
70 |
COMBINATION HAMMERS
COMMON FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Suitable for bits and accessories with SDS-plus shank end
With the appropriate accessories, it is also suitable for bits
and accessories with cylindrical shank end (no impact)
Hammer stop
Rotation stop
Clockwise and anticlockwise rotation
Metabo "Quick" chuck change
Robust Metabo Marathon motor
Pneumatic high-performance hammer mechanism
ꢀ
Die cast aluminium gear housing
Ergonomic housing design for fatigue-proof operation
Rubber-coated handle
Metabo S-automatic torque limiting clutch
Metabo winding protection grid
Auto-stop carbon brushes
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Brush wear indicator
CODE!
CODE!
KHE 26
KHE 26 Contact
KHE 28
Electronic
Combination Hammer
KHE 26
Electronic
Combination Hammer
KHE 26 Contact
Electronic
Combination Hammer
KHE 28
Special advantages
ꢀ
Metabo "Contact" Technology
Metabo CODE! System: electronic
anti-theft system, activated by CODE!
key (accessory)
Vario Constamatic (VC) full-wave
electronics
Vario Tacho Constamatic (VTC) full-wave
electronics
Thumbwheel for preselection of speed
ꢁ
ꢁ
ꢁ
ꢀ
ꢁ
ꢁ
ꢀ
ꢀ
ꢁ
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
No-volt release switch
Comparative device characteristics
Torque
Drilling capacity in
- Concrete with hammer drill bits
- Concrete with router bits
- Concrete with TCT bits
- Masonry with TCT bits
No load speed
16 Nm
26 mm
16 Nm
26 mm
20 Nm
28 mm
65 mm
0 - 1.000 /min
800 W
65 mm
0 - 1.050 /min
800 W
80 mm
0 - 1.000 /min
1.010 W
Rated input power
Output power
450 W
450 W
610 W
Rated load speed
1.000 /min
4.600 /min
2,3 J
830 /min
4.830 /min
2,3 J
1.000 /min
4.600 /min
2,5 J
Maximum impact rate
Maximum single-blow energy
Collar diameter
43 mm
43 mm
43 mm
Bit retainer
Weight (without mains cable)
SDS-plus
2,7 kg
SDS-plus
2,7 kg
SDS-plus
2,7 kg
Standard equipment
Hammer chuck for tools with
SDS-plus shank end, quick-
action keyless chuck for tools
with cylindrical shank end,
rubber-coated side handle,
drilling depth guide, carry case
Hammer chuck for tools with
SDS-plus shank end, rubber-
coated side handle, drilling
depth guide, carry case
Hammer chuck for tools with
SDS-plus shank end,
rubber-coated side handle,
drilling depth guide, carry case
Type
Order no.
KHE 26
6.00337
KHE 26 Contact
6.00244
KHE 28
6.00338
ꢀ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
| 71
COMBINATION HAMMERS
EQUIPMENT FEATURES
EQUIPMENT FEATURES
ꢀ
ꢀ
Suitable for bits and accessories with SDS-plus shank end
Suitable for bits and accessories with SDS-max shank end
ꢀ
ꢀ
With the appropriate accessories, it is also suitable for bits
With the appropriate accessories, it is also suitable for bits
and accessories with cylindrical shank end (no impact)
and accessories with spline shank or ratio thread
ꢀ
ꢀ
Hammer stop
Metabo VibraTech (MVT): reduced vibration levels and
ꢀ
Rotation stop
Metabo CODE! System: electronic anti-theft system,
therefore less impact on joints due to the integrated
damping system on the handles
ꢀ
ꢀ
activated by CODE! key (accessory)
Additional handle can be fitted to three places on the housing
ꢀ
ꢀ
Clockwise and anticlockwise rotation
Optional 30% impact reduction setting for working with
ꢀ
Metabo "Quick" chuck change
more pliant materials
ꢀ
ꢀ
Vario Tacho Constamatic (VTC) full-wave electronics
Rotation stop
ꢀ
ꢀ
Robust Metabo Marathon motor
Vario Tacho Constamatic (VTC) full-wave electronics
ꢀ
ꢀ
Pneumatic high-performance hammer mechanism
Electronic soft start for precise spot-drilling
ꢀ
ꢀ
Die cast aluminium gear housing
Pneumatic high-performance hammer mechanism
ꢀ
ꢀ
Rubber-coated handle
Magnesium die cast gear housing
ꢀ
ꢀ
Torque limiting clutch
Torque limiting clutch
ꢀ
ꢀ
Auto-stop carbon brushes
Stoppable switch for trouble-free chiselling in continuous
ꢀ
Brush wear indicator
operation
ꢀ
Chisel can be fixed in 12 positions
ꢀ
Auto-stop carbon brushes
ꢀ
The service display, for example, indicates when the
carbon brush needs to be replaced, plus an LED indicating
mains voltage
... with the
Metabo CODE!
The electronic
security system
protects against
theft and unaut-
horised use.
KHE 32
KHE 56
NEW
CODE!
Electronic Combination Hammer
KHE 32
Electronic Combination Hammer
KHE 56
Comparative device characteristics
Torque
Drilling capacity in
- Concrete with hammer drill bits
- Concrete with router bits
- Concrete with TCT bits
- Masonry with TCT bits
No load speed
Comparative device characteristics
Torque
25 Nm
32 mm
90 Nm
Drilling capacity in
- Concrete with hammer drill bits
- Concrete with router bits
- Concrete with TCT bits
- Masonry with TCT bits
No load speed
45 mm
65 mm
100 mm
80 mm
0 - 780 /min
900 W
0 - 450 /min
1.300 W
650 W
Rated input power
Output power
Rated input power
Output power
480 W
Rated load speed
780 /min
3.800 /min
3,5 J
50 mm
SDS-plus
3,5 kg
Maximum impact rate
Maximum single-blow energy
Collar diameter
Bit retainer
Weight (without mains cable)
2.840 /min
14 J
66 mm
SDS-max
6,7 kg
Maximum impact rate
Maximum single-blow energy
Collar diameter
Bit retainer
Weight (without mains cable)
Standard equipment
Metabo VibraTech (MVT) side
handle, drilling depth guide,
lubricant for tool shank end,
duster, carry case
Standard equipment
Hammer chuck for tools with
SDS-plus shank end, quick-
action keyless chuck for tools
with cylindrical shank end,
rubber-coated side handle,
drilling depth guide, carry case
Type
Order no.
KHE 32
6.00332
Type
Order no.
KHE 56
6.00340
ꢀ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
72 |
COMBINATION HAMMERS
EQUIPMENT FEATURES
EQUIPMENT FEATURES
ꢀ
ꢀ
Suitable for bits and accessories with SDS-max shank end
With the appropriate accessories, it is also suitable for bits
and accessories with spline shank or ratio thread
Rotation stop
Metabo CODE! System: electronic anti-theft system,
activated by CODE! key (accessory)
Vario Tacho Constamatic (VTC) full-wave electronics
Thumbwheel for preselection of speed
Suitable for bits and accessories with SDS-max shank end
With the appropriate accessories, it is also suitable for bits
and accessories with spline shank or ratio thread
Easy to hold in all working situations: three rubber-coated
handles always ensure an optimal holding position
Metabo VibraTech (MVT): reduced vibration levels and
therefore less impact on joints due to the integrated
damping system on the handles
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Pneumatic high-performance hammer mechanism
Magnesium die cast gear housing
Dust seal protects from the finest dust particles
Ergonomic housing design for fatigue-proof operation
Rubber-coated handle
Torque limiting clutch
Additional handle can be fitted to three places
on the housing
The adjustable front handle can be rotated 360°
and the angle adjusted
Long, slim design for an upright working position when
performing tasks at ground level
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
No-volt release switch
Auto-stop carbon brushes
Brush wear indicator
Rotation stop
ꢀ
Vario Tacho Constamatic (VTC) full-wave electronics
Thumbwheel for preselection of speed
Electronic soft start for precise spot-drilling
Die cast aluminium gear housing
Torque limiting clutch
Chisel can be fixed in 16 positions
ꢀ
Auto-stop carbon brushes
Brush wear indicator
CODE!
KHE 96
NEW
KHE 75
Electronic Combination Hammer
Electronic Combination
Hammer KHE 96
KHE 75
Comparative device characteristics
Torque
Comparative device characte-
ristics
65 Nm
Drilling capacity in
Torque
120 Nm
- Concrete with hammer drill bits
- Concrete with router bits
- Concrete with TCT bits
- Masonry with TCT bits
No load speed
Rated input power
Output power
Rated load speed
45 mm
80 mm
Drilling capacity in
- Concrete with hammer drill bits
- Concrete with router bits
- Concrete with TCT bits
- Masonry with TCT bits
No load speed
Rated input power
Output power
Maximum impact rate
Maximum single-blow energy
Collar diameter
50 mm
80 mm
150 mm
100 mm
100 mm
140 - 280 /min
1.150 W
690 W
280 /min
2.650 /min
10 J
125 - 250 /min
1.700 W
850 W
1.950 /min
27 J
Maximum impact rate
Maximum single-blow energy
Collar diameter
58 mm
73 mm
Bit retainer
Weight (without mains cable)
SDS-max
6,4 kg
Bit retainer
Weight (without mains cable)
SDS-max
11,8 kg
Standard equipment
Side handle, drilling depth
guide, lubricant for tool shank
end, duster, carry case
Standard equipment
Metabo VibraTech (MVT)
side handle, drilling depth
guide, lubricant for tool
shank end, duster,
carry case
Type
Order no.
KHE 75
6.00275
Type
Order no.
KHE 96
6.00596
ꢀ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
| 73
CHIPPING HAMMERS
COMMON FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Suitable for bits and accessories with SDS-max shank end
Metabo VibraTech (MVT): reduced vibration levels and therefore
less impact on joints due to the integrated damping system
on the handles
Additional handle can be fitted to three places on the housing
Vario Tacho Constamatic (VTC) full-wave electronics
Electronic soft start
Pneumatic high-performance hammer mechanism
Stoppable switch for trouble-free chiselling in continuous
operation
ꢀ
ꢀ
ꢀ
ꢀ
The adjustable front handle can be rotated 360° and the angle
Auto-stop carbon brushes
adjusted
MHE 56
NEW
MHE 96
NEW
Electronic Chipping Hammer
MHE 56
Electronic Chipping Hammer
MHE 96
Special advantages
ꢀ
Easy to hold in all working situations: three
rubber-coated handles always ensure
an optimal holding position
ꢁ
ꢁ
ꢀ
Long, slim design for an upright working
position when performing tasks at ground
level
ꢀ
Optional 30% impact reduction setting
ꢁ
for working with more pliant materials
ꢀ
Thumbwheel for preselection of impact rate
Die cast aluminium gear housing
ꢁ
ꢁ
ꢀ
ꢀ
Magnesium die cast gear housing
Chisel can be fixed in 12 positions
ꢁ
ꢁ
ꢀ
ꢀ
Chisel can be fixed in 16 positions
Brush wear indicator
ꢁ
ꢁ
ꢀ
ꢀ
The service display, for example, indicates
ꢁ
when the carbon brush needs to be replaced,
plus an LED indicating mains voltage
Comparative device characteristics
Rated input power
Output power
1.300 W
650 W
1.600 W
800 W
Maximum impact rate
Maximum single-blow energy
Bit retainer
2.840 /min
14 J
SDS-max
6,3 kg
1.950 /min
27 J
SDS-max
11 kg
Weight (without mains cable)
Standard equipment
Front handle, lubricant for tool shank end,
duster, carry case
Metabo VibraTech (MVT) side handle, front
handle, lubricant for tool shank end, duster,
carry case
Type
Order no.
MHE 56
6.00366
MHE 96
6.00396
ꢀ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
74 |
THE CARBIDE-TIPPED HAMMER DRILL BIT
A HUNDRED THOUSAND TIMES SUCCESSFUL ON CONCRETE, BRICKWORK AND NATURAL STONE.
The most modern generation of hard-metal drills: toughest concrete and granite. Life cycle and drilling
Long service life, fast and no problem when cutting on speed are increased considerably, which results in
steel reinforcements. The new cutting geometry on the reducing the costs for the user.
chisel-shaped bit ensures quick penetration into the
SDS-plus „Pro 4“ hammer drill bit
SDS max hammer drill-bit
For optimal performance with hammer drills
For optimal performance with hammer
of class 2 to 4 kg with SDS-plus-tool holder
drills of its class, starting from 5 kg with
SDS-plus-tool holder
Slim, dynamic drill points with chisel form
drill head
This means
Dynamic head construction with main
and secondary cutting edges
This means
– speedy penetration into the material
– easy centring
– point accurate spot drilling
– fast penetration rate
– reduced friction in the bore hole
– centric guide
The bore diameter 12–15 mm are produced
with 2 cutting edges
The 4-spiral helix „Pro 4“
Double delivery helix
enables fast delivery of bore dust, decreases
friction in the bore hole and improves the
vibration behaviour.
Short spiral inlets and large boring dust
grooves ensure quick boring dust discharge.
The continuous core reinforcement
ensures stability, durability and the optimal
transfer of energy. It supresses vibrations
thus increasing the drilling progress and life
expectancy.
Maximum energy transfer
The optimized core reinforced spiral form
ensures stability,durability and the optimal
energy transfer. It dampens the vibrations
and therefore increases the drilling progress
and life expectancy.
Most modern thermal treatment and surface
compaction
Most modern thermal treatment and surface
compaction
guarantees prevention of wear on surfaces
and make the drill resistant against bending.
guarantees prevention of wear on surfaces
and make the drill resistant against bending.
SDS-plus shaft
SDS-max shaft
Download from Www.Somanuals.com. All Manuals Search And Download.
| 75
SDS-PLUS ACCESSORIES
FOR HAMMERS WITH SDS-PLUS BIT RETAINER
BHA 18, KHA 24, P´ 7911, UHE 22 Multi, UHE 28 Multi, BHE 20 Compact, BHE 20 IDR, BHE 22, BHE 24, BHE 26, KHE 26, KHE 26 Contact,
KHE 28 and KHE 32
Carbide hammer drill bit
with SDS-plus shank end
ᕃ
ᕅ
ꢀ
+
with UHE 22 Multi,
UHE 28 Multi,
KHE 26,
Other tools with SDS-plus shank end
ᕆ
ᕇ
ᕈ
ᕉ
ᕊ
KHE 26 Contact,
KHE 28 and KHE 32
ᕍᕠ
with
BHE 22,
BHE 24,
BHE 26
ᕋ
ᕍᕗ
ᕍᕘ
ᕍꢁ or ᕍꢂ
ᕍᕜ
ᕍᕞ
ᕍᕝ
for hammer drill bits with ratio thread
ᕍᕟ
ᕎᕠ
Tools for non-impact work
Tools for screw-driving
Diameter Working
Overall length Packing unit
mm
Order
no.
Hard metal hammer drill bit, SDS-plus, pro 4, 2 cutting edges
mm
length
mm
ᕃ
8
8
8
8
200
250
400
550
150
50
260
310
460
600
210
110
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6.31835
6.25229
6.31788
6.31789
6.31836
6.31837
6.31838
6.31839
6.31840
6.31841
6.30519
6.31793
6.31794
6.31842
6.31843
6.31844
6.31845
6.31846
6.30526
6.30527
6.31797
6.31847
6.31848
6.31849
6.31850
6.31851
6.31852
6.31801
6.30528
6.31802
6.31853
6.31803
6.31854
6.31855
6.31856
6.30531
6.30532
6.31804
6.31805
ꢀ
ꢀ
Latest generation carbide: long tool life, quicker, no problem when
cutting on steel reinforcements.
The new cutting geometry on the chisel-shaped bit head ensures
quick penetration in the toughest concrete and in granite. Easy
centring.
9
10
10
10
10
10
10
10
10
11
11
12
12
12
12
12
12
13
13
14
14
14
14
14
14
14
15
15
16
16
16
16
16
16
16
100
150
200
250
400
550
950
100
200
100
150
200
410
550
950
100
200
100
150
200
250
400
550
950
200
400
100
150
250
400
550
750
950
160
210
260
310
450
600
1.000
160
260
160
210
260
450
600
1.000
160
260
160
210
260
310
450
600
1.000
260
450
160
210
310
450
600
800
1.000
ꢀ
ꢀ
The new 4-spiral helix with its large geometry ensures quick
delivery of bore dust, reduces friction in drill hole, improves
the vibration behaviour.
For use in concrete, masonry, natural stone
Diameter Working
Overall length Packing unit
mm
Order
no.
mm
length
mm
Self-service packaging
4
5
5
5
50
50
80
110
110
140
160
210
110
160
110
160
210
260
110
160
210
260
310
400
110
160
210
110
160
210
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6.31780
6.31820
6.30511
6.31821
6.31864
6.31822
6.31823
6.31824
6.31825
6.31826
6.31866
6.31827
6.31828
6.31879
6.31876
6.31868
6.31785
6.31829
6.31830
6.31831
6.31832
6.31833
6.31834
100
150
50
100
50
100
150
200
50
100
150
200
250
350
50
5
5,5
5,5
6
6
6
6
6,5
6,5
6,5
6,5
6,5
6,5
7
7
7
8
8
100
150
50
100
150
8
Download from Www.Somanuals.com. All Manuals Search And Download.
76 |
SDS-PLUS ACCESSORIES
Diameter Working
Overall length Packing unit
mm
Order
no.
Hard metal hammer drill bit, SDS-plus, 4 cutting edges
mm
length
mm
ꢀ
Packed loosely
4
5
5
6
6
6
8
8
50
50
110
110
160
110
160
210
110
160
210
110
160
210
260
160
210
260
160
210
260
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
6.25230
6.25231
6.25232
6.25233
6.25234
6.25235
6.25236
6.25237
6.25238
6.25239
6.25240
6.25241
6.25242
6.25243
6.25244
6.25245
6.25246
6.25247
6.25248
ꢀ
Symmetrical construction of the head with main and auxiliary
cutters ensures centric guiding in the drill hole and reduces friction,
meaning longer life for the drill
Quick boring dust discharge through short spiral inlets and large
boring dust grooves of optimised double delivery helix
The 4-cutter geometry protects the drill bit on contacting iron
reinforcement and helps prevent damage to the bit head
For use in concrete, masonry, natural stone
100
50
100
150
50
100
150
50
100
150
200
100
150
200
100
150
200
ꢀ
ꢀ
ꢀ
8
10
10
10
10
12
12
12
14
14
14
Diameter Working
mm
Overall length Packing unit
mm
Order
no.
length
mm
16
16
18
18
20
20
22
24
24
25
28
30
32
200
400
200
400
200
400
400
200
400
400
400
400
400
250
450
250
450
250
450
450
250
450
450
450
450
450
1
1
1
1
1
1
1
1
1
1
1
1
1
6.31701
6.31702
6.31703
6.31704
6.31705
6.31706
6.31707
6.31708
6.31709
6.31710
6.31711
6.31712
6.31713
Hard metal hammer drill bit, SDS-plus, 2 cutting edges
ᕃ
ꢀ
ꢀ
The slim, chisel-shaped bit head enables fast penetration into the
material to be drilled
The continuous core reinforcement ensures stability
and durability. It enables maximum energy transmission
from rotary hammer to drill tip.
Hard metal hammer drill bit, SDS-plus, pro 4
ꢀ
ꢀ
Order
no.
Friction and vibration are reduced and user and machine
are relieved by the narrow back spacers
State-of-the-art thermal treatment and surface sealing by
shot-blasting ensure the prevention of wear on surfaces
and make the drill bit resistant against bending
4-piece, in small plastic case
Ø 5, 6, 8,10 mm,
L = 110/160 mm
6.30580
ꢀ
For use in concrete, masonry, natural stone
Diameter Working
Overall length Packing unit
mm
Order
no.
mm
length
mm
18
18
18
18
18
19
19
20
20
20
20
20
22
22
22
22
23
24
24
25
25
25
25
26
26
150
250
400
550
950
150
400
150
250
400
550
950
200
400
550
950
200
200
400
200
400
550
950
200
400
200
300
450
600
1.000
200
450
200
300
450
600
1.000
250
450
600
1.000
250
250
450
250
450
600
1.000
250
450
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6.30533
6.31806
6.30589
6.31807
6.31808
6.30534
6.30535
6.30536
6.30590
6.30537
6.31809
6.31810
6.30538
6.30539
6.31811
6.31812
6.31813
6.30540
6.30541
6.31814
6.30549
6.31815
6.31816
6.30542
6.30548
5-piece, in small plastic case
Ø 5, 6, 6, 8, 10 mm,
L = 160 mm
6.30581
7-piece, in small metal case
Ø 5, 6, 6, 8, 8, 10, 12 mm,
L = 110/160/165 mm
6.30584
5-piece, combo plastic case
Ø 6, 8, 10 mm hammer drill bit,
pointed chisel (6.31421),
flat chisel (6.31420)
6.30599
Download from Www.Somanuals.com. All Manuals Search And Download.
| 77
SDS-PLUS ACCESSORIES
Chisel with SDS-plus shank end
Carbide core cutters, M 16 female thread
ᕍᕗ
ꢀ
Optimised with larger carbide teeth
Chisel shape
Overall
length
mm
Cutting
width
Order
no.
for longer tool life. Higher power
efficiency due to stably, thin-walled
bit bodyFor concrete and masonry
ᕅ
Pointed chisel,
round tip
250
250
6.30992
6.31421
Diameter
mm
Working length
mm
Order
no.
ᕆ
Pointed chisel,
square tip
25
30
35
40
50
68
82
90
100
112
55
55
55
55
55
55
55
55
55
55
6.23390
6.23391
6.23392
6.23393
6.23394
6.23395
6.23396
6.23397
6.23398
6.23399
ᕇ
Flat chisel
250
20
6.31420
ᕈ
Scaling chisel
250
250
40
22
6.31425
6.31422
ᕉ
Chasing gouge
Carbide pilot drills for core cutters
ᕊ
Diameter
mm
Overall length
mm
Order
no.
Mortar chisel,
carbide-tipped
Mortar chisel,
carbide-tipped
130
200
6.31423
6.31424
ᕍᕘ
8
120
6.27040
ᕋ
Anchor-head holders with
M 16 male thread
Tile chisel,
offset
250
40
6.31456
Order
no.
Assortment of chisels with SDS-plus shank end
Anchor-head holder
KW 11
Overall length: 90 mm
anchor-head holder
SDS-plus
Overall length: 105 mm
6.27041
6.27043
6.27042
ᕍᕙ
ᕍꢁ
ᕍꢂ
Order
no.
SDS-plus drill bit / chisel set
(5 piece)
6.30477
Consisting of hammer drill bits of
Ø 6, 8, 10 mm (1 each),
1 pointed chisel (6.31421) and
1 flat chisel (6.31420)
anchor-head holder
SDS-plus
Overall length: 220 mm
Plastic round box
Accessories
SDS-plus chisel set
(3 piece)
Comprising
1 pointed chisel (6.31421),
1 flat chisel (6.31420) and
1 scaling chisel (6.31425)
Plastic round box
SDS-plus chisel set
(5 piece)
6.30478
6.30484
Order
no.
Connector
6.30928
6.30283
6.31285
ᕍᕜ
With 1/2"-20 UNF thread for
the connector 6.30283 for
hammer drill bits with ratio
thread and core cutters
Comprising
2 pointed chisels (6.31421),
2 flat chisels (6.31420) and
1 scaling chisel (6.31425)
Plastic round box
Connector
ᕍᕝ
ᕍᕞ
For hammer drill bits with
ratio thread and for fitting
the core bit using the pilot
drill 6.23038
Connector
Chiselling attachment
With 1/2"-20 UNF thread for
chuck and hexagon recess
1/4" (6.35 mm) for screwdriver
bits with bit retaining bush
Order
no.
In order to work without
6.31409
ᕍᕠ
Bit retaining bush
6.31281
6.35035
rotary motion with the chisels
6.31420, 6.31421, 6.31422,
6.31423, 6.31424, 6.31425 and
6.31426 you must use the
chiselling attachment 6.31409.
ᕎᕠ
ᕍᕟ
For fitting bits and sockets with 1/4" (6.35 mm)
hexagon in the spindle of drills and impact
drills with spindle thread 1/2"-20 UNF and
hexagon recess 1/4" (6.35 mm)
Geared chuck
Clamping width: 1,5 - 13 mm
Female thread: 1/2"-20 UNF
Key size: 2
Download from Www.Somanuals.com. All Manuals Search And Download.
78 |
SDS-MAX ACCESSORIES
FOR HAMMERS WITH SDS-MAX BIT RETAINER
ᕃ
ꢀ
ᕅ
ᕍᕝ
ᕍᕜ
–
for carbide-tipped hammer drills
with SDS plus shank end
for carbide-tipped
hammer drills with
splined shank end
ᕍᕞ
ᕎᕙ
ᕎᕠ
ᕍᕟ
ᕎᕘ
ᕎᕗ
Diameter
mm
Working length
mm
Overall length
mm
Order
no.
Carbide hammer drill bits, SDS-max, 2 cutters
ᕃ
22
22
22
24
24
25
25
25
28
28
28
30
30
32
32
32
35
35
35
38
38
40
40
40
45
52
200
400
800
400
200
200
400
800
250
450
550
250
450
250
450
800
250
450
550
250
450
250
450
800
450
450
320
520
920
520
320
320
520
920
370
570
670
370
570
370
570
920
370
570
670
370
570
370
570
920
570
570
6.23324
6.23325
6.23326
6.23328
6.23327
6.23329
6.23330
6.23331
6.23332
6.23333
6.23334
6.23335
6.23339
6.23340
6.23341
6.23342
6.23343
6.23344
6.23345
6.23346
6.23347
6.23348
6.23349
6.23350
6.23337
6.23338
ꢀ
ꢀ
Symmetrical construction of the head with main and
auxiliary cutters ensures centric guiding in the drill hole
and reduces friction, meaning longer life for the drill.
Short spiral inlets and large boring dust grooves
in the optimised double delivery helix ensure
quick boring dust discharge.
Maximum energy transfer due to dynamic
core strengthening.
For use in concrete, masonry, natural stone
ꢀ
ꢀ
Diameter
mm
Working length
mm
Overall length
mm
Order
no.
12
12
12
14
14
15
15
200
400
550
200
400
200
400
340
540
690
340
540
340
540
6.23310
6.23311
6.23312
6.23313
6.23314
6.23315
6.23316
Carbide hammer drill bits, SDS-max, 4 cutters
ᕃ
Carbide router bits (one-piece) with SDS-max
ꢀ
ꢀ
Symmetrical construction of the head with main and
auxiliary cutters ensures centric guiding in the drill hole
and reduces friction, meaning longer life for the drill.
Short spiral inlets and large boring dust grooves in
the optimised double delivery helix ensure
quick boring dust discharge.
ꢀ
ꢀ
Extremely long tool life even when using powerful
rotary hammers
Optimum power transmission to bit head without
damping loss of impact force.
3 large spirals for fast drilling progress, low vibration
drilling and quick dust discharge.
Ideal for drilling into reinforced iron and hard materials.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Maximum energy transfer due to dynamic core strengthening.
The additional 2 auxiliary cutters protect the drill
bit on contacting iron reinforcement and helps prevent
damage to the bit head.
ꢀ
For use in concrete, masonry, natural stone
Diameter
mm
Overall length
mm
Order
no.
Diameter
mm
Working length
mm
Overall length
mm
Order
no.
45
45
55
55
65
65
80
80
550
990
550
990
550
990
550
990
6.23375
6.23376
6.23377
6.23378
6.23379
6.23380
6.23381
6.23382
16
16
18
18
20
20
20
200
400
200
400
200
400
800
340
540
340
540
320
520
920
6.23317
6.23318
6.23319
6.23320
6.23321
6.23322
6.23323
Download from Www.Somanuals.com. All Manuals Search And Download.
| 79
SDS-MAX ACCESSORIES
Chisel with SDS-max shank end
Assortment of chisels with SDS-max shank end
Chisel shape
Overall length Cutting
Order
no.
Order
no.
mm
width
SDS-max chisel set
(5 piece)
Comprising
2 pointed chisels (6.23352),
2 flat chisels (6.23354) and
1 scaling chisel (6.23355)
Plastic round box
6.30488
ᕅ
Pointed chisel,
round tip
Pointed chisel,
round tip
Pointed chisel,
round tip
280
400
600
6.23351
6.23352
6.23358
SDS-max chisel set
(5 piece)
6.30489
ᕆ
Flat chisel
Flat chisel
Flat chisel
280
400
600
25
25
25
6.23353
6.23354
6.23359
Comprising
3 pointed chisels (6.23352),
2 flat chisels (6.23354)
Plastic round box
ᕇ
Scaling chisel
Scaling chisel
Scaling chisel
400
300
350
50
80
115
6.23355
6.23356
6.23366
Connectors
Order
no.
ᕈ
Chasing gouge
300
26
6.23357
Connector
SDS-max/ SDS-plus
Connector
SDS-max/ spline shank
Connector
spline shank/ SDS-max
Connector
spline shank/ SDS-plus
6.23371
6.23372
6.23373
6.30276
ᕍᕝ
ᕍᕞ
ᕉ
Channel chisel
300
400
32
50
6.23365
6.23367
ᕊ
Tile chisel,
offset
ᕋ
Toothed chisel
300
300
32
10
6.23368
6.23369
ᕍᕠ
Mortar chisel
ᕍᕗ
Spade chisel
400
110
6.23383
ᕍᕘ
Asphalt cutter
400
380
90
35
6.23384
6.23385
ᕍᕙ
Gouge chisel
ᕍꢁ
Stake driver
Stake driver
260
260
16,5
13
6.23386
6.23387
ᕍꢂ
Tool holder
220
6.23389
6.23456
ᕍᕜ
Tamping plate 150 x 150 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
80 |
OTHER ACCESSORIES
FOR HAMMERS WITH RATIO THREAD
FOR HAMMERS WITH HEXAGONAL SHANK END
Carbide router bits
with ratio thread
Chisels with hexagon shank end,
KW 19 x 82.5 mm (with collar)
Chisel shape
Overall length Cutting width Order
ᕍᕟ
mm
no.
Diameter
mm
Overall length
mm
Order
no.
Pointed chisel
Pointed chisel
370
570
6.23440
6.23441
40
45
55
68
80
150
150
150
150
150
6.23301
6.23302
6.23303
6.23304
6.23305
Flat chisel
Flat chisel
370
570
24
24
6.23442
6.23457
Order
no.
Toothed chisel
Asphalt cutter
390
32
6.23455
Anchor-head holder
for carbide router bits
with ratio female and
male thread
6.23299
ᕎᕠ
460
320
80
25
6.23447
6.23450
Ratio threaded
peg
6.23027
Chasing gouge,
offset
Carbide core cutters with ratio thread
Chisels with hexagon shank end
KW 19 (cyl. end 16.5 mm)
ꢀ
Sturdy universal tool for hard work in
concrete and other building materials
ᕎᕗ
Chisel shape
Overall length Cutting width Order
mm
no.
Diameter
mm
Working length
mm
Order
no.
40
50
68
80
90
100
125
100
100
100
100
100
100
100
6.23033
6.23034
6.23035
6.23036
6.23037
6.23032
6.23031
Pointed chisel
Pointed chisel
300
450
6.23360
6.30380
Flat chisel
Flat chisel
300
450
25
25
6.23361
6.30381
Pilot drills with ratio thread
Chasing gouge
250
6.23362
Order
no.
Pilot drill 12 x 155 mm,
ratio thread
for work with the
carbide core cutters
with ratio thread
6.23038
ᕎᕘ
Scaling chisel
Toothed chisel
300
300
50
30
6.23363
6.23364
Connectors
Order
no.
Connector
SDS-max/ ratio
6.23370
ᕎᕙ
ꢀ
Connector with ratio
female thread and
SDS-max shank end,
length 195 mm, for the
anchor-head holder
6.23299 of router bits
and for mounting drilling
bits with the help of the
pilot drill 6.23038
Connection piece,
KW 19/ ratio
6.23374
Download from Www.Somanuals.com. All Manuals Search And Download.
| 81
OTHER ACCESSORIES
Dust extraction accessories
Integral chucks for rotary hammers
For all machines with 43 mm
collar diameter
Order
no.
Order
no.
SDS-plus hammer chuck
For accessories with
SDS-plus shank end
(UHE 22, UHE 28 Multi,
BHE 26, BHE 26, KHE 26)
6.31920
ꢀ
Extraction unit
For work with
6.31590
drill bits of Ø 4-20 mm;
with drilling depth
guide; to fasten the
extraction unit on
the collar of the
machines, one
Quick-action keyless chuck
with adapter
6.31921
ꢀ
For accessories with
cylindrical shank end
(UHE 22, UHE 28 Multi,
BHE 24, BHE 26,
requires the support
handle 6.31594
KHE 26 Contact, KHE 28)
Geared chuck with adapter
For accessories with
6.31924
ꢀ
cylindrical shank end
(for UHE 22, UHE 28 Multi,
BHE 24, BHE 26,
Extraction unit
For work with
drill bits of
6.31591
KHE 26 Contact, KHE 28)
Ø 16-40 mm;
SDS-plus hammer chuck KHE 32
For accessories with
SDS-plus shank end
(for KHE 32)
6.31922
6.31923
with drilling depth
guide; to fasten the
extraction unit on
the collar of the
machines, one
requires the support
handle 6.31594
ꢀ
Quick-action keyless chuck
with adapter, KHE 32
ꢀ
For accessories with
cylindrical shank end
(for KHE 32)
Accessories
Support handle for
extraction units
For fitting the
extraction units
on the collar
6.31594
6.31592
Order
no.
Code! Key
For protection of Metabo
machines (with CODE!
configuration) from misuse
6.23127
of the machines
ꢀ
ꢀ
Suction hose
The complete Metabo
tool park (with CODE!
configuration) can be
protected with a single
CODE! protected with key
Connector with
internal Ø 30 mm
and connector with
outer Ø 35 mm
NEW
Full-view safety goggles
Very comfortable full-view safety
6.31071
ꢀ
Adapter 35/58 mm
Connector
6.30316
6.31593
goggles. Only light pressure
around the eye area, giving
a comfortable secure fit due
to the use of two compound
materials (hard and soft
components). The excellent
ventilation leaves the eye area
feeling pleasant and free from
irritation. Also suitable for
people who wear glasses.
UV protection 2-1, coating
on the lens: scratch-free
NEW
on the outside and mist-free
on the inside.
Replacement lens for
safety goggles 6.31075
6.31159
6.31800
Special grease for
tool shank end
ꢀ
For shank ends of hammer
drill bits, chisels, adapters,...;
prevents friction and wear
coefficient; bio-degradable
ꢀ
High anti-aging, high resistance
to heat, high anti-corrosion
properties
Download from Www.Somanuals.com. All Manuals Search And Download.
82 |
WALL CHASERS
COMMON FEATURES
ꢀ
Suitable for quick and clean cutting of wall chases
ꢀ
Groove width adjustable
ꢀ
Spindle lock
ꢀ
Variably adjustable cutting depth
ꢀ
Robust Metabo Marathon motor
ꢀ
Power-saving work through drawing cut from top
to bottom
ꢀ
Adjustable additional handle
ꢀ
Supplied with chase extraction chisel
ꢀ
MFE 30
Also suitable for cutting by using only one diamond
cutting disc
ꢀ
ꢀ
ꢀ
Metabo winding protection grid
Auto-stop carbon brushes
Extraction nozzle for all common suction hoses
MFX 65
1400 Watt
Electronic
Wall Chaser
MFE 30
2500 Watt
Wall Chaser
MFX 65
Diamond cutting discs
Diameter
Segment
dimensions
mm
Maximum Packing Order
x bore
mm
speed
/min
unit
no.
Special advantages
ꢀ
Tacho Constamatic (TC)
ꢁ
"Flexiamant Laser", segmented cutting edge,
for hard materials
full-wave electronics
Starting current limitation
Electronic starting current
limitation
No-volt release switch
Roller under the motor
housing for exact machine
guiding
Rotatable handle without
ꢀ
ꢁ
ꢁ
ꢀ
Suitable for all hard materials such as concrete
ꢀ
ꢁ
ꢁ
(even reinforced), concrete pipes, kerbstones,
granite, hard sandstones, facing stones,
exposed aggregate concrete
ꢀ
ꢀ
ꢀ
Quality of diamond and bond adjusted to
highest requirements
ꢀ
Laser-welded diamond segments for optimum
ꢀ
ꢁ
ꢁ
safety
tools
ꢀ
Maximum working speed 80 m/s
ꢀ
Metabo safety switch:
safety lock against
unintentional start
ꢀ
Overload protection
Metabo S-automatic torque
ꢁ
ꢁ
ꢀ
limiting clutch
125 x 22,23
230 x 22,23
40 x 2 x 7,5
40 x 2,8 x 7,5
12.200
6.600
1
1
6.24541
6.24544
Comparative
device characteristics
Torque
Diameter of cutting disc
Possible groove widths
"Flexiamant Laser", segmented cutting edge,
for abrasive materials
3,5 Nm
125 mm
10/17/23/30 mm
18 Nm
230 mm
ꢀ
For best cutting results in abrasive materials
such as fresh concrete, sand-lime brick,
sandstone
3/9/17/29/33/
37/41 mm
20 - 65 mm
6.600 /min
2.500 W
ꢀ
High-grade diamond quality in hard bond pro-
Cutting depth adjustable
No load speed
Rated input power
Output power
0 - 30 mm
8.200 /min
1.400 W
750 W
vides for high cutting output and optimum tool life
ꢀ
Laser-welded diamond segments for optimum safety
ꢀ
Maximum working speed 80 m/s
1.770 W
Rated load speed
Weight (without mains cable)
8.200 /min
3,9 kg
4.500 /min
7,7 kg
Standard equipment
4 spacer rings,
adjusting nut,
7 spacer rings,
adjusting nut,
125 x 22,23
230 x 22,23
40 x 2 x 7,5
40 x 2,4 x 7,5
12.200
6.600
1
1
6.246411)
6.24644
side handle, offset side handle, span-
screwdriver, span- ner wrench, chase
ner wrench, chase extraction chisel,
1) Standard equipment with MFE 30 (Order no. 6.01119.50)
extraction chisel,
sheet steel carry
case
sheet steel carry
case
Accessories
Order
no.
Suction hose
6.30344
Connector Ø: 35/35 mm
Hose length: 4 m
Suction hose Ø: 35 mm
Typ
Bestell-Nr.
– with 2 diamond cutting discs
– without diamond cutting discs
MFE 30
MFX 65
–
Machine
ꢀ
6.01119.50
ꢀ
6.0119
6.01225
Download from Www.Somanuals.com. All Manuals Search And Download.
| 83
|