MKS5620.O/M.QXD 7/2/03 9:15 AM Page 21
MKS5620
User’s Guide
CD/CD+G Karaoke
System with
Cassette Recorder
and B&W Monitor
Before operating this product,
please read these instructions completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical
enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get
the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion-and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what
sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want
you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage
from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries
Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise.
This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
EIA
EST. 1924
We
WantYou
LISTENING
ForALifetime
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 3
SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions
carefully. Please note that these are general precautions and may not
pertain to your unit. For example, this unit may not have the capability
to be connected to an outdoor antenna.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
1. READ INSTRUCTIONS
Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes, and requirements for grounding electrode.
Do not use attachments not recommended by the product's
manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water- for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury and serious damage to
the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the
PORTABLE CART WARNING
(symbol provided by RETAC)
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
surfaces may cause the appliance and cart
18. SERVICING
combination to overturn.
9. VENTILATION
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation and to ensure reliable operation of the product
and to protect it from overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat source. This
product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
10. POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment o other controls may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
f.
When the product exhibits a distinct change in performance - this
indicates a need for service.
13. LIGHTNING
23. HEAT
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
14. POWER LINES
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 4
LOCATION OF CONTROLS
1. CD Compartment
2. POWER Button
3. POWER Indicator
4. Monitor Screen
FRONT
16
17
1
5. ECHO Control
6. AVC (Auto Vocal) Control
7. MASTER VOLUME Control
8. BALANCE Control
9. TONE Control
2
3
4
18
19
10. MIC1 VOLUME Control
11. Cassette Compartment
12. MIC1 Jack
13. Cassette Buttons (from right
to left):
20
21
5
6
22
23
24
7
8
9
25
26
27
28
PAUSE ( )
10
STOP/EJECT (
)
FAST FORWARD (ŠŠ)
REWIND (¥¥)
PLAY (Š)
11
12
29
RECORD
(
)
14. Speaker
15. AC Cord (Rear of Unit)
16. Carrying Handles
17. CD Door OPEN/CLOSE Area
18. CD Indicators (PLAY/PAUSE,
REPEAT, PROGRAM)
13
14
19. CD Display
20. PROGRAM Button
21. REPEAT Button
15
22. Play/Pause (Š ) Button
23. Skip/Search
24. Skip/Search
25. Stop (■) Button
Button
Button
REAR JACK PANEL
26. PHONES (Headphones) Jack
27. MIC2 VOLUME Control
28. Function Switch
30
31
32
33
34
(TAPE/CDG/CD)
29. MIC2 Jack
30. VIDEO OUT Jack
31. AUDIO OUT OUT Jacks
32. BRIGHTNESS Control
33. CONTRAST Control
34. V-HOLD Control
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 5
POWER SOURCE
AC:
Use the AC polarized line cord included with the unit for
operation on AC power. Insert into a conveniently located AC
outlet having 120V, 60Hz.
NOTE: The AC plug supplied with the unit is polarized to help
minimize the possibility of electric shock. If the AC plug does
not fit into a nonpolarized AC outlet, do not file or cut the wide
blade. It is the user’s responsibility to have an electrician
replace the obsolete outlet.
OPTIONAL CONNECTIONS
If you are using special CD+G (Graphics) discs in this portable Karaoke system, you can connect this unit to
an external television set in order to see the On Screen Graphics that are recorded on CD+G Karaoke discs
on an external TV, as well as the built-in monitor.
The video cable has yellow RCA type plugs on each end. Please note that your TV set must have an RCA
type Video Input Jack in order to view the CD+G lyrics on your TV screen. You cannot connect this portable
COMPACT
Karaoke system to your TV’s coaxial antenna terminal.
Also note that On Screen lyrics are only available on special Karaoke compact discs that bear
the CD+G mark.
DIGITAL AUDIO
GRAPHICS
Many newer TV sets have a set of Video and Stereo Audio jacks on the front panel for quick and
easy connections without having to turn the TV set to gain access to the jacks on the back panel. If your TV
set has such front panel A/V jacks, we suggest that you use those jacks to connect your portable Karaoke.
After connecting the Video Out jack on this portable Karaoke to the Video In jack on your TV with the
included video cable, you have the following three choices:
1. Listen to the sound from the built-in speakers in this portable Karaoke system. In this case, no external
audio connections are required.
2. If your TV has stereo audio input jacks, you can connect the Audio Out jacks on the back of this unit to
the Audio In jacks on your TV. The stereo audio connection cable is included. In this case, the lyrics from
the CD+G disc will appear on your TV screen and/or monitor and the sound from the disc will be heard
from your TV speakers.
From
Video
Out
KARAOKE UNIT
From
Audio
Out
To video
In
To
Audio In
TELEVISION
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 6
OPTIONAL CONNECTIONS (CONTINUED)
Note: If you have a mono TV with only one Audio In jack, you may have to purchase a “Y” adapter
(stereo to mono) at your local electronics accessories store in order to combine the Left and Right stereo
channels from this portable Karaoke to a single mono channel for connection to your mono TV.
3. You can connect the Audio Out jacks from this portable Karaoke to the Aux In or Audio In jacks of your
home stereo system to hear the sound through your home stereo speakers. Follow the instructions for
your home stereo system to select the device connected to the external jacks as the audio source.
From
Video
Out
KARAOKE UNIT
From
Audio
Out
To video
In
TELEVISION
RECEIVER OR HOME STEREO
To
Audio In
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 7
OPERATION
CONNECTING THE MICROPHONE
This unit has two microphone jacks which will allow you to sing along with your favorite songs. Before
connecting, make sure the MIC VOLUME controls are set to minimum.
HEADPHONE JACK
For private listening, connect low impedance 3.5mm (32 ohm) stereo headphones (not included) to this jack.
The speakers are automatically disconnected when the headphone plug is inserted into the jack.
TONE CONTROL
MIC ON/OFF SWITCH
ECHO CONTROL
1
1
1
Rotate the TONE control clock- To turn the microphone on, slide
wise to increase the tone the ON/OFF switch, located on
response or counterclockwise to the side of the microphone, to the
Rotate the ECHO control clock-
wise to increase the echo or
counterclockwise to decrease the
echo.
decrease the tone response.
ON position. To turn the
microphone off, slide the ON/OFF
switch to the OFF position.
BALANCE CONTROL
(KARAOKE)
AUTO VOCAL CONTROL (AVC)
1
When the VOCAL feature is activated, the vocals on a multiplex
recording are muted as soon as the singer begins singing into
the microphone. When the singer stops singing, the vocals are
automatically unmuted. Adjust the AUTO VOCAL control for the
best balance between playback and microphone levels.
Rotate the BALANCE control
clockwise to hear the music and
vocals or counterclockwise to
hear the music only.
IMPORTANT: This feature only works with multiplex CDs.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 8
OPERATION (CONTINUED)
PLAYING CASSETTE TAPES
1
2
3
1
2
Press the POWER button ❶ to
turn the unit on; the POWER
indicator will light. Rotate the
Function switch ❷ to the TAPE
position.
Press the PLAY (Š) button to
begin playback.
Press the STOP/EJECT (
)
button to open the Cassette Door
and insert a cassette with the
open end facing down, then close
the cassette door.
4
5
6
1
2
3
1
Adjust the MASTER VOLUME ❶ To advance or rewind the tape To pause playback momentarily,
rapidly, press either the F.FWD
(ŠŠ) ❶ or REWIND (¥¥) ❷
and TONE ❷ controls as desired.
press the PAUSE ( ) button. The
tape movement stops but the tape
button. When you reach the motor is still running. Press the
desired point, press the PLAY
(Š) button ❸ to resume normal
playback.
PAUSE ( ) button again to
release pause and resume
normal playback.
TO SING ALONG
7
8
If you would like to sing along with
a tape, simply play the tape,
insert one or two microphones
and sing along!
To stop playback before the tape When the tape reaches the end,
ends, press the STOP/EJECT the auto-stop mechanism
activates, the PLAY (Š) button is
released and the tape motor
shuts off. Press the STOP/EJECT
(
) button. The PLAY (Š)
button is released and the tape
motor shuts off.
(
) button to open the Cassette
Door and remove the tape.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 9
OPERATION (CONTINUED)
PLAYING COMPACT DISCS
NORMAL PLAYBACK
(For karaoke, please refer to page 14.)
1
2
3
Press the POWER button to turn Rotate the Function switch to the Press the OPEN/CLOSE area to
the unit on; the POWER indicator
will light.
open the CD compartment door.
Place a CD on the center spindle,
with the printed label side facing
up. Close the CD compartment
door.
CD position.
4
5
6
1
2
The CD player will read the table
of contents on the disc and the
total number of tracks on the disc
will appear in the display.
Adjust the MASTER VOLUME ❶
and TONE ❷ controls as desired.
Playback will continue until all of
the tracks on the disc have been
played.
Press the Play/Pause (Š )
button to begin playback on
Track 1; the PLAY/PAUSE
indicator will light.
7
8
9
To stop playback before the disc After the last track has been Remove your disc, close the CD
ends, press the Stop (■) button. played, the disc stops auto- Compartment door and press the
matically and the display shows POWER button to turn the unit
the total number of tracks on the off; the POWER indicator will turn
disc. If you are finished listening, off.
The disc will stop and the display
will show the total number of
tracks.
press the OPEN/CLOSE area to
open the CD Compartment door.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 10
OPERATION (CONTINUED)
CD PAUSE CONTROL
1
2
During CD playback, if you wish
to pause the disc momentarily,
press the Play/Pause (Š )
button. Playback stops but the
disc continues to spin and the
PLAY/PAUSE indicator will blink.
Press the Play/Pause (Š ) button
again to release pause and resume
normal CD playback; the
PLAY/PAUSE indicator will light.
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
1
2
2
1
After you insert the disc into the CD
player and the total number of tracks
appear on the display, you may press
When the desired track number
blinks in the display, within five
seconds, press the Play/Pause
(Š ) button. Playback will begin
on the track you selected.
either the Skip/Search (
) ❷ button to select a specific
track for playback.
) ❶ or
(
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH (
/
)
1
2
3
CD ONLY
During playback, depress and
hold either the Skip/Search (
or ( ) button to move the player
)
forward or backward within a
track to locate a specific musical
passage. The player will move
forward or backward at high
speed as long as the button is
depressed. When you release the
During playback, press the During playback, press the
Skip/Search ( ) button once to Skip/Search ( ) button once to
advance the player to the move the player back to the
beginning of the next track. Press beginning of the current track. Press
Skip/Search (
) or (
) button,
the Skip/Search (
) button the Skip/Search (
) button
normal playback will resume.
repeatedly to advance the player repeatedly to move the player back
to higher numbered tracks.
to lower numbered tracks.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 11
OPERATION (CONTINUED)
REPEAT PLAYBACK
1
2
3
1
1
2
3
2
2
To repeat a single track, press the To repeat all of the tracks on a To cancel Repeat Playback,
REPEAT button ❶ once; the disc continuously, press the press the REPEAT button ❶ until
REPEAT button ❶ twice; the
) ❷ or REPEAT indicator will light solid. You can also cancel Repeat
REPEAT indicator will blink.
Press the Skip/Search (
the REPEAT indicator goes out.
Playback by pressing the Stop
(
) button ❸ to select the Press the Play/Pause (Š )
(■) button ❷.
button ❷ to repeat all tracks.
specific track that you wish to
repeat. When the desired track
number blinks in the display,
within five seconds, press the
PLAY/PAUSE (Š ) button ❹ to
begin playback. The specific track
you selected will be repeated
continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 19 track programmable memory that allows you to program up to 19 tracks
on any disc for playback in any desired order. You may program 19 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
2
3
1
2
Press the POWER button ❶ to Open the CD Compartment door Press the PROGRAM button; “0”
and insert your disc in the CD will blink in the display and the
player. Close the CD compart- PROGRAM indicator will blink.
ment door. Wait for the CD player
to read the table of contents and
display the total number of tracks
turn the unit on; the POWER
indicator will light. Rotate the
Function switch ❷ to the CDG or
CD position.
on the disc.
CONTINUED ON THE NEXT PAGE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 12
OPERATION (CONTINUED)
4
5
6
2
2
2
1
1
1
Press the Skip/Search (
) ❶ or Press either the Skip/Search (
)
Repeat step 5 until you have
❶ or ( ) button ❷ to select the programmed the desired track
(
) button ❷ to select the first
numbers into the CD Program
Memory.
track that you wish to program. next track you wish to program.
When the desired track number When the desired track number
When the memory is full, “- -” will
appear in the display.
appears in the display, press the
PROGRAM button ❸ again.
appears in the display, press the
PROGRAM button ❸ again.
Press the Play/Pause (Š ) button ❶ to begin programmed playback.
The PROGRAM indicator will blink and playback will begin on the first
track that you programmed. The player will continue to play all of the
tracks that you programmed in the order in which you programmed
them. When the last programmed track has been played, the player
will stop and the display will again show the total number of tracks on
the disc. If you press the PROGRAM button ❷ and then press the
7
2
1
Play/Pause (Š ) button ❶ again, playback will start on the first track
you programmed and will continue until all the programmed tracks
have been played.
To cancel programmed playback, while in the Stop mode, press the PROGRAM button followed by the
Stop (■) button or open the CD Door.
To check the programmed tracks, while in the Stop mode, press the PROGRAM button repeatedly to view
the programmed tracks.
PROGRAMMED REPEAT
1
2
3
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, program
the tracks you wish to hear in the
order you wish to hear them, as
described above. Then, press the
REPEAT button twice. The
PROGRAM indicator will blink and
and the REPEAT indicator will light.
Programmed Repeat operation
will continue indefinitely until you
press the Stop (■) button or open
the CD door.
Press the Play/Pause (Š )
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 13
OPERATION (CONTINUED)
RECORDING AUDIO FROM THE MICROPHONE (NON-KARAOKE)
1
2
3
Press the STOP/EJECT (
)
Press the POWER button to turn
Rotate the Function switch to the
button to open the Cassette Door
and insert a blank cassette with
the open end down, then close the
cassette door. Insert the
microphone into the appropriate
jack.
the unit on; the POWER indicator TAPE position.
will light.
4
5
6
1
2
To pause recording momentarily,
When ready to record, press the Adjust the MASTER VOLUME ❶
and TONE ❷ controls as desired.
This has no affect on the
recording due to the ALC circuit.
press the PAUSE ( ) button. The
tape movement stops but the tape
motor is still running. Press the
RECORD (
(Š) button will automatically
depress.
)
button; the PLAY
PAUSE ( ) button again to release
pause and resume recording.
8
7
When the tape reaches the end,
the auto-stop mechanism
activates, the PLAY (Š) and
To stop recording before the tape
ends, press the STOP/EJECT
(
) button. The PLAY (Š) and
RECORD
(
)
buttons are
RECORD buttons are
(
)
released and the tape motor
shuts off. Press the STOP/EJECT
released and the tape motor
shuts off.
(
) button to open the Cassette
Door and remove the tape.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 14
OPERATION (CONTINUED)
PLAYING A CD+G (COMPACT DISC + GRAPHICS) DISC KARAOKE
You can listen to a CD+G karaoke. CD+G discs combine the recorded music with an additional video track
that displays the song lyrics on this monitor. As the song plays, the words to be sung are highlighted in a
different color on most CD+Gs.
1
2
3
Insert a CD+G disc. Insert the
microphone into the MIC jack(s)
and rotate the Function switch to
the CDG position. You can
connect the unit to a TV or TV
and stereo as shown on pages 5
and 6.
Adjust the AUTO VOCAL control
button to start CD/CD+G as described below.
playback.
Press the Play/Pause (Š )
The image and lyrics will appear
on the monitor screen.
When the VOCAL feature is
4
activated, the vocals on a
multiplex recording are muted as
soon as the singer begins singing
into the microphone. When the
singer stops singing, the vocals
are automatically unmuted. Adjust
the AUTO VOCAL control for the
best balance between playback
and microphone levels.
2
1
1
Adjust the MIC VOLUME control ❶ as desired. Increasing this control
will increase the volume of the microphone. Adjust the ECHO control ❷
to add an echo effect to your voice. The ECHO control ❷ is variable so
add as much or as little reverb as desired. Sing or talk into the
microphone and you will hear both the CD+G and the microphone.
IMPORTANT: This feature only
works with multiplex CDs.
NOTE: The Program and Repeat features on a CD+G CD operate the same as with standard CD.
INFORMATION ABOUT CD+G KARAOKE DISCS:
CD+G Karaoke discs are designed specifically for playback in special CD players that include a CD+G decoder, such as
this unit. These discs contain the lyrics to each song and the lyrics will appear on your TV screen, line by line, as the disc
is playing. Usually the words on the screen will change color in time with the music to help you sing along at the proper
tempo, even if you do not know the song.
Most CD+G Karaoke discs have all of the songs recorded twice, first with music only, and then with music and vocal
together. For example, if you purchase a CD+G disc containing four songs, tracks one through four will have the music
only without vocals, and tracks five through eight will have the same four songs recorded with music on the left channel
and the vocal tracks on the right channel.
If you wish to sing along “solo” without any other vocals, you should select tracks one through four (for example). If you
wish to sing a “duet” or be part of a group, select tracks five through eight (for example) that contain both the music and
vocals.
NOTE: Make sure the BALANCE control is set to the center position so you can hear both the vocal and music tracks at
an equal level.
MICROPHONE FEEDBACK:
“Feedback” is a howling or screeching sound that occurs when the microphone comes too close to the speaker(s). To
avoid microphone feedback, keep the microphone as far away from the speakers as the microphone cable will allow. If
you must bring the microphone close to the speakers, such as when you are changing a disc or adjusting one of the
other controls on the front of the unit, set the microphone ON/OFF switch to the OFF position.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 15
OPERATION (CONTINUED)
KARAOKE RECORDING FROM A CD+G (COMPACT DISC + GRAPHICS) DISC
You can record a cassette from a CD+G disc. CD+G discs combine the recorded music with an additional
video track that displays the song lyrics on this monitor screen or an external television screen (if connected).
As the song plays, the words to be sung are highlighted on this TV screen.
1
2
3
Rotate the Function switch to the
CDG position. Insert a CD+G
disc.
Rotate the AUTO VOCAL control
as desired (see AUTO VOCAL
Control section below). Insert the
microphone into the appropriate
jack.
Press the Play/Pause (Š )
button to start CD+G playback.
If using a CD+G disc, the image
and lyrics will appear on the
monitor screen.
4
5
6
Adjust the ECHO control to add
an echo effect to your voice. The
ECHO control is variable so add
as much or as little reverb as
desired. Sing or talk into the
microphone(s) and you will record
and hear both the CD+G and the
microphone(s).
Insert a blank cassette tape. Adjust the MIC VOLUME
When ready to record, press the control(s) as desired. Increasing
this control will increase the
volume of the microphone(s).
RECORD ( ) button; the PLAY
(Š) button will automatically
depress.
NOTE: The Program and Repeat features on a CD+G CD operate the same as with a standard CD.
AUTO VOCAL CONTROL:
Rotate the AUTO VOCAL control clockwise to suppress the vocal tracks on the CD being played when
singing into the microphone(s). Rotate the AUTO VOCAL control counterclockwise to have the vocal tracks
on the CD play at normal volume.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 16
OPERATION (CONTINUED)
When watching a CD+G on the monitor screen, adjust the brightness, v-hold and contrast as follows:
V-HOLD
BRIGHTNESS
CONTRAST
If the picture is too strong or too
weak, rotate to adjust the contrast
and clearly define the shades of
blacks, grays and whites.
If the picture moves up and down If the picture is too light or too
or rolls, rotate to adjust the dark, rotate to adjust the
vertical hold.
brightness.
CARE AND MAINTENANCE
Caring for Compact Discs
• Treat the compact disc carefully. Handle the compact disc
only by its edges. Never allow your fingers to come in contact
with the shiny, unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to the compact
disc label.
• Clean the compact disc periodically with a soft, lint-free, dry
cloth. Never use detergents or abrasive cleaners to
clean the compact disc. If necessary, use a CD
cleaning kit.
• If a compact disc skips or gets stuck on a section of the
compact disc, it is probably dirty or damaged
(scratched).
• When cleaning the compact disc, wipe in straight lines
from the center of the compact disc to the outer edge
of the disc. Never wipe in circular motions.
Z
• This unit is designed to play only compact discs bearing the identification logo as shown here.
Other discs may not conform to the CD standard and may not play properly.
• Compact Discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc.
Prolonged exposure or extreme temperatures can warp the compact disc.
• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink may
damage the surface.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 17
CARE AND MAINTENANCE (CONTINUED)
SAFEGUARD AGAINST ACCIDENTAL ERASURE
When a new recording is made, any program material
previously recorded is automatically erased and only
the new recording remains. To safeguard valuable
recordings from being erased accidentally, the cassette
and the deck are equipped with a special device.
On the back of the cassette there is an erase
prevention tab on each side. To prevent accidental
erasing, break out these tabs with a screwdriver. If only
one side of the tape is to be protected, break out the
tab on the left side with the side desired facing you.
To record on a tape in which the tab has been broken,
place a piece of adhesive tape over that area.
NOTE: When a tab is broken out, the record button
cannot be depressed.
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15 (C-30), 30 (C-60) and 45 (C-90) minutes of
recording time on each side. Longer length tapes of 60 (C-120) minutes of
recording time on each side are not recommended. Use only high quality
tapes. If a problem develops, check the unit first with another cassette to
determine if the problem is with the cassette, and not with the unit.
If there is any slack in the cassette, it should be removed before inserting the
cassette. Place a pencil in one of the hubs and rotate it clockwise until all
slack is taken up.
Cleaning the unit
• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
• Mild soap and a damp cloth may be used on the front panel.
• Periodic cleaning of the tape heads, capstan and pinch roller is necessary to maintain good sound
reproduction. Clean them after every 100 hours of use or less if playback has deteriorated. Use a cotton
swab moistened with head cleaning solution or isopropyl alcohol, then wipe dry with another swab.
NOTE: Never use metal objects on or near the tape heads. Do not allow any cleaning material to fall into the
tape assembly.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 18
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptom
Possible Cause
Solution
Compact Disc Player
CD Player will not play.
CD is not installed or installed
upside-down.
Insert CD with label side up.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
General
No sound.
Karaoke
Power cord disconnected.
Using non-CD+G CD.
Connect power cord.
Use CD+G CD.
Some vocals are still
present when AUTO
VOCAL is off.
Backup vocals are supposed
to be included.
This is normal, only the main vocal(s)
are to be reduced.
Feedback is heard
when singing.
Microphone is too close to unit
or MIC volume is too high.
Move microphone away from
unit or decrease MIC volume.
Words do not appear
on TV screen.
Using non-CD+G CD.
Use CD+G CD.
Connections not done properly.
Connect to TV properly.
Cassette Player
No sound.
Function switch not set to TAPE.
Volume at minimum.
Dirty head.
Slide to the TAPE position.
Increase volume.
Sound distorted.
Speed varies.
Clean the head.
Cassette old.
Replace the cassette.
Replace the cassette.
Cassette tape worn out.
Cassette Recorder
Will not record.
Erase prevention tab removed.
Defective tape or dirty tape head.
Cover hole with adhesive tape.
Replace tape or clean tape head.
Distorted sound
on playback.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 19
SPECIFICATIONS
GENERAL:
Power Source .............................................................................................120V, 60Hz AC
Speaker ...............................................................................................Impedance 8 Ohms
Dimensions ...............................................................15 (W) x 18.25 (H) x 9.75 (D) Inches
Weight ......................................................................................................................9.5 lbs
Output Power...............................................................................................7W@10%THD
CASSETTE SECTION:
Tape .........................................................................Standard Normal Bias Cassette Tape
Frequency Response......................................................................................125–6300Hz
Wow & Flutter...............................................................................................0.35% WRMS
CD SECTION:
Disc Diameter..............................................................................................4.72” (120mm)
.....................................................................................................3.15” (80mm) Single CD
Optical Source...................................................................................Semiconductor Laser
D/A Conversion................................................................................................................xx
Specifications are subject to change without notice.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO
RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS5620.O/M.QXD 7/2/03 9:15 AM Page 20
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|