MC4285.O/M.QXD 1/3/02 1:36 PM Page 19
CALLER ID TELEPHONE/DUAL ALARM
CLOCK WITH AM/FM RADIO
MODEL: MC4285
BEFORE OPERATING THIS PRODUCT,
PLEASE READ THESE INSTRUCTIONS COMPLETELY.
OPERATING INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 2
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
1. If your local telephone exchange only accepts Pulse dialing, you may have to
switch the Tone/Pulse switch to Tone to access certain services that require
Tone signalling (such as home banking). After the initial line is connected to the
number you are calling, switch the Tone/Pulse switch to Tone to access Tone
signalling. When you have completed your call, please switch the Tone/Pulse
switch back to Pulse.
2. Hearing aid compatibility - Your telephone is compatible for use with hearing aids.
FCC and Phone Company Information
Your telephone company is required by the Federal Communications Commission to
allow you to connect FCC registered telephones to their lines. The FCC requires you
to provide information, if requested by the local telephone company, about the
connection of an FCC registered telephone to their lines. They may ask you for the
FCC registration number and the ringer equivalence number (REN); both are at the
bottom of the base. They may also ask for the Universal Service Order Code
(USOC), which is RJ-11C.
The REN is used to determine the quantity of devices which may be connected to
the telephone line. Excessive REN’s on the telephone line may result in the devices
not ringing in response to an incoming call. In most, but not all areas, the sum of the
REN’s should not exceed five (5.0). To be certain of the number of devices that may
be connected to the line, as determined by the total REN’s, contact the telephone
company to determine the maximum REN for the calling area.
Should your equipment cause trouble on your line which may harm the telephone
network, the telephone company shall, where practical, notify you that temporary
discontinuance of service may be required. Where prior notice is not practicable and
the circumstances warrant such action, the telephone company may temporarily
discontinue service immediately. In case of such temporary discontinuance, the
telephone company must: (1) promptly notify you of such temporary discontinuance;
(2) afford you the opportunity to correct the situation; (3) inform you of your right to
bring a complaint to the Commission pursuant to procedures set forth in Part 68 of
FCC Rules and Regulations.
The telephone company may make changes in its communication facilities,
equipment operations or procedures where such action is required in the operation
of its business and not consistent with FCC Rules and Regulations. If these changes
are expected to affect the use of performance of your telephone equipment, the
telephone company must give you adequate notice in writing, to allow you to
maintain uninterrupted service.
This equipment cannot be used on telephone company provided coin service.
Connection to Party Line Service is subject to state tariffs.
Any changes or modifications not expressly approved by (state party responsible for
compliance) can void the user’s authority to operate the equipment.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 3
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
CAUTION:
To reduce the risk of fire or injury to persons, read and follow these instructions:
1. Use only the following type and size battery: 9V Battery.
2. Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local
codes for possible special disposal instructions.
3. Do not open or mutilate the battery. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
4. Exercise care in handling batteries in order not to short the battery with conducting
materials such as rings, bracelets, and keys. The battery or conductor may overheat
and cause burns.
5. Do not attempt to recharge the battery(ies) provided with or identified for use with
this product. The batteries may leak corrosive electrolytes or explode.
6. Do not attempt to rejuvenate the battery(ies) provided with or identified for use with
this product by heating them. Sudden release of the battery electrolyte may occur
causing burns or irritation to eyes or skin.
7. When replacing batteries, all batteries should be replaced at the same time. Mixing
fresh and discharged batteries could increase internal cell pressure and rupture the
discharged battery(ies). (Applies to products employing more than one separately
replaceable primary battery.)
8. When inserting batteries into this product, the proper polarity or direction must be
observed. Reverse insertion of batteries can cause charging, and that may result in
leakage or explosion. (Applies to product employing more than one separately
replaceable primary battery).
9. Remove the battery from this product if the product will not be used for a long period
of time (several months or more) since during this time the battery could leak in the
product.
10. Discard "dead" battery as soon as possible since "dead" batteries are more likely to
leak in a product.
11. Do not store this product, or the battery provided with or identified for use with this
product in high-temperature areas. Batteries that are stored in a freezer or
refrigerator for the purpose of extending shelf life should be protected from
condensation during storage and defrosting. Batteries should be stabilized at room
temperature prior to use after cold storage.
IMPORTANT:
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR MEMOREX.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 4
LOCATION OF CONTROLS
12
13
14
BASE
1
15
2
3
4
5
6
7
8
9
16
17
18
19
20
21
22
23
10
11
24 25
26
27 28 29 30 31
HANDSET
1. Battery Compartment (Bottom of
Unit)
16. VOLUME Control
17. SET Button
2. SNOOZE Button
3. ALARM 1 Button
4. RINGER (HI/LO/OFF) Switch
5. DISPLAY (HI/LO) Switch
6. ALARM OFF Button
7. ALARM 2 Button
18. BAND (AM/FM) Switch
19. REVIEW (L) Button
20. TUNING Control
21. DIAL Button
22. REVIEW (M) Button
23. DELETE Button
8. RADIO ON/OFF Button
9. SLEEP Button
10. Display
11. Radio Dial Scale and Pointer
12. HANDSET Jack (Rear of Unit)
13. PHONE LINE Jack (Rear of Unit)
14. DC IN Jack (Rear of Unit)
15. NEW CALL Indicator
24. Memory Buttons (M1,M2,M3)
25. Handset VOLUME Switch
26. Key Buttons (0–9,#,*)
27. Tone/Pulse Switch
28. STORE Button
29. REDIAL Button
30. FLASH Button
31. MEMORY Button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 5
INSTALLATION
This unit can be used on a desk or other level surface away from excessive heat
or direct sunlight.
Desk or Table Use
1. Set the RINGER switch to the HI or LO position to
have the ringer sound when receiving a phone call.
2. Connect the coiled cord to the handset and
HANDSET jack on the rear of the base. Connect
the straight cord to the PHONE LINE jack on the
rear of the base and telephone jack as shown in
the figure to the right.
3. If desired, rotate the clips on the bottom of the unit
so the phone tilts slightly forward and makes viewing the caller ID easier.
POWER SOURCES
AC Power Adapter
To operate the unit using AC power, connect the AC adapter to the jack labelled
“DC IN” on the rear of the unit and to a wall outlet having 120V, 60Hz only.
CAUTION: Use only the AC adapter provided with the unit. Using another AC
adapter may damage the unit. Do not touch the AC
adapter with wet hands.
Battery Installation
AC Outlet
To install the 9V battery, make sure the telephone line
cord is unplugged and open the battery compartment
with a slotted screwdriver as shown in the figure below.
AC Adapter's Plug
Insert a 9V battery (not included) and replace the battery compartment cover.
Replace the battery when the Battery indicator (“ ”) lights in the display.
NOTE: The battery is only used to store the clock and caller ID memory, it will not
show the caller ID display nor play the radio when the AC adapter is not
connected.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as
indicated in the battery compartment.
3. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
4. Do not try to recharge batteries not intended to be recharged; they can
overheat and rupture. (Follow battery manufacturer’s directions.)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 6
TELEPHONE OPERATION
SETTING THE MENU OPTIONS
1
2
1
1
3
3
2
2
Press the SET button ❶ once; “SET
Press the SET button ❶ again;
LANGUAGE” will appear in the display. “CONTRAST” will appear in the
display. Press the REVIEW (M) ❷ or
(L) ❸ button to select the Contrast (1
being lightest, 8 being darkest).
Press the REVIEW (M) ❷ or (L) ❸
button to select the desired language
3
4
1
1
3
3
2
2
Press the SET button ❶ again; “SET
TIME/DATE” will appear in the display
and the hours will blink. Press the
REVIEW (M) ❷ or (L) ❸ button to set
the current hour. Make sure the
AM/PM setting is shown correctly when
setting the hours.
Press the SET button ❶ again. Press
the REVIEW (M) ❷ or (L) ❸ button to
set the current minute.
CONTINUED ON NEXT PAGE.
NOTES:
•
While setting the menu options, a button must be pressed within 10
seconds, otherwise the display will revert back to the default display
and the menu settings may not be saved.
•
To cancel any setting, simply press the DELETE button.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 7
TELEPHONE OPERATION (CONTINUED)
SETTING THE MENU OPTIONS (CONTINUED)
5
6
1
1
3
3
2
2
Press the SET button ❶ again. Press
the REVIEW (M) ❷ or (L) ❸ button to
set the current month.
Press the SET button ❶ again. Press
the REVIEW (M) ❷ or (L) ❸ button to
set the current day.
7
8
1
3
2
Press the SET button ❶ again. Press
the REVIEW (M) ❷ or (L) ❸ button to
set the first digit of the local area code.
Press the SET button ❶, followed by
the REVIEW (M) ❷ or (L) ❸ button to
set the second, and then third digit of
the area code.
Press the SET button again, and all the
menu options will be set.
NOTES:
•
While setting the menu options, a button must be pressed within 10
seconds, otherwise the display will revert back to the default display
and the menu options may not be saved.
•
To cancel any setting, simply press the DELETE button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 8
TELEPHONE OPERATION (CONTINUED)
RECEIVING CALLS
1
Wait for the phone to ring twice so the caller ID registers the call. Lift the handset
and speak into the mouthpiece. Hang up when the call is completed.
MAKING CALLS
1
Lift the handset and listen for a dial tone. Press the key buttons (0-9) for the
specified number you wish to call.
RINGER HI/LO/OFF SWITCH
1
2
Slide the RINGER switch to the HI or
LO position to turn the ringer on.
Slide the RINGER switch to the OFF
position to turn the ringer off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 9
TELEPHONE OPERATION (CONTINUED)
REDIAL BUTTON
FLASH BUTTON
1
2
Press the REDIAL button to automatically Press the FLASH button to hang up
redial the last number dialed. the phone without having to return it to
NOTE: Please note that only the last the base. This is useful for using the
number you called on this telephone phone with the Call Waiting feature.
can be stored in the Redial memory.
NEW CALL INDICATOR
1
When a call has been received, the
NEW CALL indicator will blink.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 10
TELEPHONE OPERATION (CONTINUED)
TONE BUTTON
DISPLAY (HI/LO) SWITCH
1
1
If Tone/Pulse switch is set to Pulse, Set the DISPLAY switch to the HI
simply press the */TONE button on the position for a more illuminated display
handset to temporarily set the phone for or to the LO position for a less
TONE. This is useful when accessing illuminated display.
automated telephone prompts that
require the Tone signal.
HANDSET VOLUME SWITCH
TONE/PULSE SWITCH
1
1
Slide the Tone/Pulse switch on the side
of the handset to Tone or Pulse to match
the service provided on your telephone
line. If you are not sure of your service,
please contact your telephone company.
Slide the Handset VOLUME switch to
raise or lower the handset’s volume as
desired.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 11
TELEPHONE OPERATION (CONTINUED)
WHAT YOUR CALLER ID DISPLAYS
NO CALL: The caller memory is empty. END OF LIST: There are no additional
calls to be reviewed.
UNKNOWN CALLER: The incoming
call does not have caller ID service or
the service area is not linked to yours.
“
”: Low Battery Indicator
PRIVATE CALLER: The incoming call
is registered as “Private Caller” and
their information is withheld.
RECEIVING A CALL WITH CALLER ID
1
2
TALMO, HOLLY
AM
CALL #
Make sure that the Caller ID service is
turned on by your phone company. When
you receive a call, the display will show
the name, number, time and date of the
caller between the first and second ring.
See above section, “What Your Caller ID
Displays” if something other then the
caller’s information appears on the display.
The NEW CALL indicator will flash
when new call(s) have been received.
3
4
TOTAL 03 NEW 01
2
AM
1
The display will indicate the total new
calls. When you want to check the calls
received, press the REVIEW (M)
button.
You can also use the REVIEW (M) ❶
or (L) ❷ button to cycle through the
past calls. Up to 80 numbers can be
stored in the caller ID memory.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 12
TELEPHONE OPERATION (CONTINUED)
TO DELETE 1 CALL/ALL CALLS
To Delete a Call: While the name and
number are displayed, press the
DELETE button ❶ once; “DELETE?”
will appear. Press the DELETE button
❶ again to delete the information.
To Delete All Calls: Press and hold
the DELETE button ❶ approximately 6
seconds, “DEL ALL CALLS?” will
appear. Press the DELETE button ❶
again to delete all past information.
Press the REVIEW (L) ❷ button to
cancel.
2
1
TO AUTOMATICALLY DIAL A NUMBER IN THE CALLER ID DISPLAY
1
2
2
1
DO NOT pick up the handset. Select the
number using the REVIEW (M) ❶ or
(L) ❷ button, then press the DIAL
If you need to change the telephone
number (adding an area code or adding
a “1”), simply repeatedly press the DIAL
button until the correct telephone
number/area code appears in the
display, then pick up the handset.
button
❸; “PICKUP OR ADJ” will appear
in the display. If the number shown at the
bottom is exactly how it should be dialed,
simply pick up the phone and the number
will be dialed.
Note:
•
Once the unit’s memory is full, any new call forces the deletion of the earliest
call information.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 13
TELEPHONE OPERATION (CONTINUED)
MANUALLY STORING NUMBERS INTO MEMORY
This telephone is equipped with 13 memories for programming your most frequently
dialed telephone numbers.
1
2
1
2
3
3
1
2
Press the STORE button ❶, then enter Then press the desired memory
location ( M1, M2, M3 ❶), or to put in
memory locations 0-9, simply press the
MEMORY ❷ button, followed by key
button 0-9❸. Repeat steps 1 and 2 to
program more numbers.
the telephone number to be stored
using the key buttons (0–9) ❷ (no tone
will be heard, but the number will be in
memory). Press the REDIAL button ❸
to insert a pause where needed, such
as dialing a 9, then needing a pause
before the number is dialed.
NOTE:
To erase a stored telephone number, simply store a new number over it by
following the steps above.
MANUALLY DIALING NUMBERS IN MEMORY
1
2
2
1
ONE TOUCH MEMORIES (M1, M2, M3) TWO TOUCH MEMORIES (0-9)
Pick up the handset and press one of
the one touch memory buttons (M1,
M2, M3) and the phone will
automatically dial the stored telephone
number.
Pick up the handset and press the
MEMORY button ❶ followed by the
desired two touch memory button (0-9)
❷ and the phone will automatically dial
the stored telephone number.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 14
RADIO OPERATION
TO PLAY THE RADIO
1
2
2
1
2
1
Press the RADIO ON/OFF button ❶ to
turn the unit on. Slide the BAND switch
❷ to the desired band (AM or FM).
Tune a station by turning the TUNING
control ❶. Adjust the VOLUME control
❷ as desired.
Antennas
FM: Extend the FM antenna wire for better FM reception.
AM: Turn the unit for better AM reception.
NOTES:
•
If you pick up the handset or receive a call when listening to the radio, the
radio sound will automatically muted until the call has ended.
•
THE RADIO WILL NOT WORK WITH THE 9V BATTERY, you must have the
AC adapter plugged into an AC outlet to listen to the radio.
ALARM OPERATION
TO SET OR RESET THE ALARM TIME
1
2
2
3
1
1
3
2
Set the desired wake up hour using the
REVIEW (M) ❷ or (L) ❶ button, then
Press the SET button ❶, followed by
the ALARM1 ❷ or ALARM 2 button ❸;
“SET ALARM” will appear in the
display and the hours will blink.
press the SET button
❸. Set the desired
wake up minutes using the REVIEW (M)
❶ or (L) ❷ button, then press the SET
button
❸; the alarm time will be set.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 15
ALARM OPERATION (CONTINUED)
TO SET THE ALARM TO WAKE TO RADIO
1
2
1
1
2
2
3
When the actual time matches the selected
preset alarm time(s), the unit automatically
turns on for 59 minutes and then shuts off.
To shut off the alarm, press the ALARM
OFF ❶ button alarm time will be reset for
the next day. Press the ALARM 1 ❷ or
ALARM 2 ❸ button until “ALARM OFF”
appears in the display to turn off the alarm
completely; the Music Note indicator will
disappear.
Set the alarm 1 or 2 time as previously
instructed. Press the desired ALARM
1 ❶ or ALARM 2 ❷ button repeatedly
until “ALARM 1 MUSIC” or “ALARM 2
MUSIC” appears in the display to have
the unit wake up to the radio; the
Music Note indicator will appear in the
display. Make sure the radio is tuned
to the desired station, and the volume
is set as desired.
TO SET THE ALARM TO WAKE TO BUZZER
1
2
1
1
2
2
3
Set the alarm 1 or 2 time as previously When the actual time matches the
instructed. Press the desired ALARM 1 selected preset alarm time(s), the unit
automatically turns on for 59 minutes
and then shuts off.
❶ or ALARM 2 ❷ button repeatedly until
“ALARM 1 BUZZER” or “ALARM 2
BUZZER” appears in the display to have
the unit wake up to the buzzer; the Bell
indicator will appear in the display.
To shut off the alarm, press the ALARM
OFF ❶ button alarm time will be reset for
the next day. Press the ALARM 1 ❷ or
ALARM 2 ❸ button until “ALARM OFF”
appears in the display to turn off the
alarm completely; the Bell indicator will
disappear.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 16
ALARM OPERATION (CONTINUED)
SNOOZE
The alarm can be temporarily turned
off manually by pressing the
1
SNOOZE button; the alarm will turn
back on automatically 7 minutes
later. It can be repeated endlessly.
NOTE: In Dual Alarm mode, if both alarms are set, the Snooze feature will only
operate up to the next alarm. If the next alarm time is reached, the unit
automatically turns on for 59 minutes and then shuts off.
TO ACTIVATE THE SLEEP FUNCTION
1
2
2
1
Press the SLEEP button; “1:00” will Repeatedly press the SLEEP button ❶
appear in the display and the radio will
turn on and play for one hour.
to change the sleep time (15 minutes
to 2 hours). Press the RADIO ON/OFF
button ❷ to turn off the sleep feature.
NOTE:
Press the SLEEP button once to check the remaining sleep time.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 17
TROUBLESHOOTING GUIDE
Refer to the following chart before requesting service:
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
No dial tone.
The line cord is not
plugged in.
Plug in the line cord.
Phone does not work. AC cord not plugged in.
Battery is weak/dead.
Plug AC cord in.
Replace battery.
Phone does not ring. RINGER switch set to OFF. Set RINGER switch to
HI or LO position.
The display is faded. Battery is weak or dead.
Install new battery or
connect AC adapter.
Contrast is set low.
Set contrast higher.
Caller ID not working. Cords connected improperly. Connect cords properly.
Caller ID service not turned Turn on caller ID service
on.
through your local phone
company.
Memory dialing does The telephone numbers
Program the numbers
in following the instructions
in the manual.
not work.
were not programmed in.
Number/Name did not Phone picked up after first
Allow the phone to ring
twice before answering.
appear on display.
Radio, no sound.
ring.
Volume at minimum.
Raise volume.
AC adapter not plugged in. Plug in AC adapter.
Alarm does not
turn on.
ALARM1 and/or 2 is not set to Press the desired ALARM
MUSIC or ALARM.
button to turn the alarm on.
Volume at minimum.
Raise volume.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT
OUR WEBSITE AT WWW.MEMCORPINC.COM OR CONTACT CUSTOMER
SERVICE AT 1-800-919-3647.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MC4285.O/M.QXD 1/3/02 1:36 PM Page 18
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|