MX7300
User’s Guide
Home Audio System with
CD Player and AM/FM
Stereo Radio
Before operating this product,
pleaseDrowenaloadd frotmhWewws.Seomainnuasls.tcormu. Acll Mtainouanls sSeacrchoAnmd Dpowlneloatd.ely.
IMPORTANT SERVICE SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions
15. OVERLOADING
carefully. Please note that these are general precautions and may not
pertain to your unit. For example, this unit may not have the capability
to be connected to an outdoor antenna.
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
1. READ INSTRUCTIONS
Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
6. ATTACHMENTS
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes, and requirements for grounding electrode.
ANTENNA
LEAD IN
WIRE
Do not use attachments not recommended by the product's
manufacturer as they may cause hazards.
7. WATER AND MOISTURE
GROUND
CLAMP
Do not use this product near water- for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury and serious damage to
the product. Use only with a cart, stand, tripod, bracket, or table
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
PORTABLE CART WARNING
(symbol provided by RETAC)
NEC - NATIONAL ELECTRICAL CODE
S2898A
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
18. SERVICING
combination to overturn.
9. VENTILATION
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation and to ensure reliable operation of the product
and to protect it from overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat source. This
product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
10. POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified
11. GROUNDING OR POLARIZATION
service personnel under the following conditions:
This product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment of other controls may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
f.
When the product exhibits a distinct change in performance - this
indicates a need for service.
13. LIGHTNING
23. HEAT
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
14. POWER LINES
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE
SPEAKER CONNECTION
1. Place the speakers in convenient locations on either
side of the unit or connect them to the unit as
described below.
2. Locate the Speaker Jacks on the sides of the unit and
connect the right speaker to the Right Speaker jack and
the left speaker to the Left Speaker jack.To extend the
speaker wire, connect the speaker plug into the extender
(the side with the hole) and the other side of the
extender (with the pin) into the respective speaker jack.
Original
speaker
wire
Connect
to speaker
jack
CAUTION: Only connect the
speakers which are supplied
with the unit. The use of any
other or additional speakers
may cause damage to the unit.
Never operate the unit without
the speakers connected.
INSERTING AND REMOVING THE FLOOR STANDS
1
2
To insert the floor stands, firmly To remove the floor stands, grasp
insert a floor stand into each the stand as shown and pull out
speaker and the main unit as the floor stand from each speaker
shown.
and the main unit.
MOUNTING THE SPEAKERS AND THE MAIN UNIT
To mount the speakers and the main unit, make sure the
speakers are plugged into their respective speaker jacks,
then secure the two speakers to the main unit using the
Mounting Plate and the eight screws.
1
To remove the Mounting plate, reverse the procedure.
NOTE: When mounting the speakers to the main unit, if the
extended speaker wire is too long, insert the wire back into
the hole on the speaker to prevent damage to the wire.
HANGING THE UNIT ON A WALL
1
2
3
Mark the three screw locations of the
Hook Plate on the desired wall using
the Hook Plate as a template, trying to
locate the screws on a stud if possible.
Hold the Hook Plate on the desired
wall (tabs facing up) and secure with
the three screws (supplied). If not
secured to a stud, use a screw/anchor
combination to secure.
If connected, remove the floor
stands by grasping the stand as
shown and pulling out the floor
stand from each speaker and the
main unit. Mount the speakers and
the main unit together as shown in
MOUNTING THE SPEAKERS
AND MAIN UNIT above.
Carefully, but firmly, place the unit
onto the Hook Plate tabs
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE (CONTINUED)
BATTERY OPERATION FOR REMOTE
The battery compartment is located on the bottom of the remote control.
• Remove the battery compartment door by pushing the tab to the left (arrow 1) and
then pulling the battery compartment down (arrow 2). See figure 1.
• Insert a CR2025 button-type battery with the “+” facing up. If the battery is inserted
incorrectly, the remote control will not operate. See figure 2.
1
2
• Replace the battery compartment door.
Figure 1
+
Figure 2
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Dispose of the battery according to your state laws and keep away from children as button-type batteries are a choking
hazard.
4. If the device is not to be used for a long period of time, remove the battery to prevent damage or injury from possible
battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
AC ADAPTOR CONNECTION
Connect the AC adapter (included) to an AC outlet having 120V, 60Hz AC only. Plug the small end into the
DC 12V jack on the bottom of the main unit.
CAUTION: Do not touch the AC adapter with wet hands. Fully insert the plug without exposing any part of
the blade.
+
–
DC 12V
Please note that this unit is equipped with a polarized AC plug which has one blade wider than the other.
This is a safety feature to reduce the likelihood of electric shock. This polarized AC plug will only fit in a
polarized AC outlet. If you find that you cannot insert this plug into your outlet, you may have an obsolete
non-polarized outlet. Please do not try to defeat this safety feature by using a non-polarized adapter or by
filing the wider blade to make it fit into your outlet. If this plug does not fit into your outlet, you should contact
a qualified licensed electrician to replace your obsolete outlet.
REMOTE SENSOR
To operate the unit with the remote control, point the remote at the remote sensor on the front of the main
unit and press the appropriate button. The remote control has an effective operating range of approximately
15 feet and an angle of no more than 30°.
NOTE: Bright sunlight may interfere with the operation of the remote control.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
FRONT
1
12
13
2
3
4
14
5
6
7
15
16
17
18
8
19
20
9
10
11
21
1. AUX Jack
12. CD Compartment
13. DISC OUT Button
2. Headphones Jack
3. ON/STANDBY Button
4. Display
14. TUNER/BAND Function Button
15. STOP/BAND (I) Button
16. Tune/Skip/Search n Button
17. FM MODE Button
5. PLAY/PAUSE (®p) Button
6. Tune/Skip/Search o Button
7. VOL. UP Button
18. MEMORY Button
8. VOL. DOWN Button
9. AUX Function Button
10. Left Speaker Jack (Side of Unit)
11. IR (Remote Sensor)/Standby Indicator
19. CD Function Button
20. Right Speaker Jack (Side of Unit)
21. DC 12V IN Jack (Bottom of Unit)
+
–
DC 12V
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS (CONTINUED)
REMOTE
1
2
9
10
2
5
8
0
1
4
7
3
6
9
3
11
12
13
14
15
4
5
6
16
17
18
7
8
19
20
1. TUNER/BAND Function Button
2. AUX Function Button
3. Number Buttons
12. FM MODE Button
13. REMAIN Button
14. ≥10 Button
4. MEMORY Button
15. EQ Button
5. PLAY/PAUSE (®p) Button
6. DISPLAY Button
16. STOP (I) Button
17. REPEAT/MEM UP Button
18. VOLUME Up/Down Buttons
19. Tune/Skip/Search Up/Down Buttons
20. RANDOM/MEM Down Button
7. INTRO Button
8. MUTE Button
9. CD Function Button
10. ON/STANDBY Button
11. DISC OUT Button
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
MUTE
PRESET EQ
8
0
7
9
1
1
To temporarily mute the sound, press the MUTE
button on the remote control; “MUTE” and the
volume indicator will blink and the sound will be
muted. Press the MUTE button again to restore
the sound.
With the power on, press the EQ button on the
remote control to cycle through the preset EQ
settings. Each press of the EQ button will cycle as
follows: JAZZ, POP, CLASSIC, FLAT.
DISPLAY BUTTON
HEADPHONE JACK
0
1
1
Press the DISPLAY button and the display will
show the EQ setting for approximately two
seconds.
To listen to the unit through headphones, simply
insert the headphones (not included) into the
Headphones jack. The speakers will be
disconnected when the Headphones are plugged
in.
REMAIN
NORMAL, REPEAT ALL OR INTRO MODES: Press the REMAIN
button once to see the remaining track time, twice to see the total
remaining time on the CD, three times to see the total elapsed time
of the CD and a fourth time to return see the elapsed time of the
track (default).
1
2
5
8
0
1
4
7
3
6
RANDOM, REPEAT 1 MODES: Press the REMAIN button once to
see the remaining track time and twice to return see the elapsed
time of the track (default).
PROGRAM PLAYBACK MODE: Press the REMAIN button once
to see the remaining track time, twice to see the playback
programmed track number and a third time to return see the
elapsed time of the track (default).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
LISTENING TO THE RADIO
1
2
3
2
1
Press the ON/STANDBY button Press the TUNER/BAND Function
to turn the unit on; the IR/Standby button to select the radio.
indicator will turn off.
Press the TUNER/BAND button 1
to select AM or FM. If listening to
FM, select the Stereo or Mono by
pressing the FM MODE button 2.
NOTE: Noise present while
listening in Stereo can be reduced
by pressing the FM MODE button
2 to select Mono.
0
4
5
6
1
2
2
1
1
2
2
MANUAL TUNING: Repeatedly
press the Tune/Skip/Search n 1 and hold the Tune/Skip/Search n
or o 2 button to manually
advance the frequency in the
display up or down until the
desired frequency appears.
AUTOMATIC TUNING: Press
Adjust the EQ button 1 and
VOLUME buttons 2 as desired.
NOTE: If the FM STEREO band
is selected and you have tuned to
1 or o 2 button until the
frequency in the display starts to
scan, and then release the button; an FM Stereo station, STEREO
the tuner will search and then
stop on the next strong station it
finds. Repeat this step until the
desired frequency appears in the
display.
will light in the display.
Hints for Better Reception
The AM and FM antennas are located inside the unit. It may be necessary to turn the unit slightly for the best
reception. You may have to experiment to find the position that provides the strongest reception for each of
your favorite stations.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
SETTING RADIO PRESETS
This unit can preset 20 AM and 20 FM radio stations for convenient recall.
1
2
3
2
1
Press the ON/STANDBY button Press the TUNER Function button
to turn the unit on; the IR/Standby to select the radio.
Press the Tune/Skip/Search n 1
or o 2 button to select a station.
indicator will turn off.
Press the TUNER/BAND button
again to select AM or FM.
0
4
1
5
6
3
5
2
3
Press the MEMORY button again to
set the station in the selected
memory.
NOTE: If you use the Number
buttons to select a preset, it is no
longer necessary to press the
MEMORY button again to set the
station into the selected memory; the
station will be set automatically after
you press the Number button(s).
Repeat steps 3 through 5 to
program up to 20 stations in each
band, if desired.
In case the main power supply
is interrupted, the memory
presets will be erased.
Press the MEMORY button 1; the
preset number will blink in the
display. Within three seconds,
press the REPEAT/MEM Up button
2 or RANDOM/MEM Down button
3 until the desired memory number
appears on the display.
NOTE: You can also use the
Number buttons to select the preset
number.
RECALLING RADIO PRESETS (20 EACH BAND)
2
5
8
0
1
4
7
3
6
9
1
2
3
1
1
1
2
2
2
Follow steps 1 and 2 above.
You can directly select a preset
using the number buttons 1. If
selecting a preset over 9, press
the ≥10 button 2, followed by the
two digits.
Press the REPEAT/MEM Up 1 or
RANDOM/MEM Down 2 button to
select a preset; the station will
automatically be tuned in.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
PLAYING COMPACT DISCS
NORMAL PLAYBACK
This unit can play back standard, CD-R and CD-RW discs.
1
2
3
Label
Side
Insert
a
CD into the CD
compartment LABEL SIDE
FACING FRONT.
Press the ON/STANDBY button Press the CD Function button to
to turn the unit on; the IR/Standby select the CD.
indicator will turn off.
NOTE: 3 inch single
CDs cannot be used
with this unit; damage
will occur.
4
0
5
1
2
2
The unit will start to play back automatically. If it does not start
playing automatically, press the PLAY/PAUSE (®p) button to begin
playback on Track 1.
NOTE: If the CD Function button is pressed and a CD is already
inserted, the unit will automatically start playing after three seconds.
Press the EQ button 1 and the
VOLUME buttons 2 as desired.
Playback will continue until all the
tracks on the disc have been
played.
2
5
8
0
1
4
7
3
6
2
6
7
1
Press the REMAIN button once to To stop playback before the disc
see the remaining track time, ends, press the STOP (I) button
twice to see the total remaining
time on the CD, three times to
see the total elapsed time of the
CD and a fourth time to return see
the elapsed time of the track
(default).
1. If done listening, press the
DISC OUT button 2 to eject the
CD.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
CD PAUSE CONTROL
1
2
During CD playback, if you wish to
pause the disc momentarily, press
the PLAY/PAUSE (®p) button.
Playback stops but the disc
continues to spin and the elapsed
time will blink in the display.
Press the PLAY/PAUSE (®p)
button again to release pause and
resume normal CD playback.
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
2
5
8
0
1
4
7
3
6
9
1
2
3
1
2
1
2
While in the stop mode, press
either the Tune/Skip/ Search n 1
or o 2 button to select a specific
track for playback.
You can also use the Direct Track
Selection buttons 1 on the
remote to directly select a track. If
the track is over 9, press the ≥10
button 2 first. Playback will start
automatically.
Press the PLAY/PAUSE (®p)
button. Playback will begin on the
track you selected.
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH (
/
)
1
2
3
During playback, depress and
hold either the Tune/Skip/Search
n or o button to move the player
forward or backward within a
track to locate a specific musical
passage. The player will move
forward or backward at high
speed as long as the button is
depressed. When you release the
Tune/Skip/Search n or o button,
normal playback will resume.
During playback, press the During playback, press the
Tune/Skip/Search n button once Tune/Skip/Search o button once to
to advance the player to the move the player back to the
beginning of the next track. Press beginning of the current track. Press
the Tune/Skip/Search n button the Tune/Skip/Search o button
repeatedly to advance the player repeatedly to move the player back
to higher numbered tracks.
to lower numbered tracks.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
REPEAT PLAYBACK
0
1
2
3
0
1
1
2
3
4
2
To repeat all of the tracks on a To repeat a single track, first To cancel Repeat Playback,
disc continuously, first press the
PLAY/PAUSE (®p) button 1 to
begin playback. Press the
REPEAT/MEM Up button 2 once;
“REPEAT” will light solid in the
display and the CD will repeat all
the tracks continuously.
press the REPEAT/MEM Up
button until “REPEAT” disappears
from the display.
press the PLAY/PAUSE (®p)
button ‚ to begin playback.
Select a track to repeat using the
Tune/Skip/Search n 2 or o 3
button. When the desired track
number appears in the display,
press the REPEAT/MEM Up
button ꢀ twice; “REPEAT 1” will
appear in the display. The specific
track you selected will be
repeated continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 60 track programmable memory that allows you to program up to 60 tracks
on any disc for playback in any desired order. You may program 60 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
5
8
4
7
6
9
1
2
3
Label
Side
2
1
Press the CD Function button.
Insert
a
CD into the CD
Press the STOP (I) button 1 to
stop automatic playback. Press
the MEMORY button 2;
“MEMORY” and “00 P-01” will
appear in the display.
compartment LABEL SIDE
FACING FRONT.
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
4
5
6
0
0
0
3
3
3
1
1
1
2
2
2
Press either the Tune/Skip/Search Repeat step 5 until you have
Press the Tune/Skip/Search n 1
programmed up to 60 track
numbers into the CD Program
Memory. When the memory is
full, “FULL” will blink in the
display.
n 1 or o 2 button to select the
next track you wish to program.
When the desired track number
appears in the display, press the
MEMORY button 3 again.
or o 2 button to select the first
track that you wish to program.
When the desired track number
appears in the display, press the
MEMORY button 3 again.
After programming up to 60 tracks in the CD Program Memory, press
the PLAY/PAUSE (®p) button 1 to begin programmed playback.
“MEMORY” will appear in the display and playback will begin on the
first track that you programmed. The player will continue to play all of
the tracks that you programmed in the order in which you programmed
them. When the last programmed track has been played, the player
will stop and the first programmed track will appear and “MEMORY”
will blink in the display.Press the PLAY/PAUSE (®p) button 1 again,
playback will start on the first track you programmed and will continue
until all the programmed tracks have been played. To cancel the
Programmed Playback mode, press the STOP (I) button 2 twice
during Program playback and the display will show the total tracks and
time of the disc again.
7
2
5
8
0
1
4
7
3
6
9
2
1
NOTE: To check the programmed tracks, while in the Programmed Stop mode, press the MEMORY button
repeatedly to view the programmed tracks.
PROGRAMMED REPEAT
1
2
3
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, press
the REPEAT/MEM Up button to
enter the Repeat-All mode and
then program the tracks you wish
to hear in the order you wish to
hear them, as described above.
Both the MEMORY indicator will
blink and REPEAT indicator will
appear in the display.
Programmed Repeat operation
will continue indefinitely until you
press the STOP (I) button.
Press the PLAY/PAUSE (®p)
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
RANDOM PLAYBACK
1
2
3
To play the tracks on the CD in a
random order, while in the Stop
mode, press the RANDOM/MEM
Down button on the remote.
“RAND” will appear in the display.
To cancel random playback,
press the RANDOM button;
“RAND” will disappear from the
display.
Press the PLAY/PAUSE (®p)
button. The unit will randomly play
each track on the CD and then
stop.
INTRO PLAYBACK
1
2
To play the first 10 seconds of To cancel Intro playback, press
each track on the CD, while in the the INTRO button; “INTRO” will
Stop mode, press the INTRO disappear from the display.
button on the remote.
INTRO NOTE: You can select a track for Intro playing using the Number buttons and ≥10
button.
USING AN EXTERNAL UNIT
1
Connect an external unit to the
AUX jack on the top of the unit.
Press the AUX button to output
the external unit’s sound through
the two speakers.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
Caring for Compact Discs
• Treat the compact disc carefully. Handle the compact disc
only by its edges. Never allow your fingers to come in contact
with the shiny, unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to the compact
disc label.
• Clean the compact disc periodically with a soft, lint-free, dry
cloth. Never use detergents or abrasive cleaners to clean
the compact disc. If necessary, use a CD cleaning kit.
• If a compact disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged (scratched).
• When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer
edge of the compact disc. Never wipe in circular motions.
Z
• This unit is designed to play only compact discs bearing the identification logo as shown here.
Other compact discs may not conform to the CD standard and may not play properly.
• Compact discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures or dust, etc. Prolonged
exposure or extreme temperatures can warp the compact disc.
• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink may
damage the surface.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptom
Radio
Possible Cause
Solution
Noise or sound distorted
on radio broadcasts.
Station not tuned properly for
AM or FM.
Retune the AM or FM broadcast
station.
Unit is not positioned correctly.
FM Stereo is selected.
Rotate unit for best reception.
Press FM MODE button to select Stereo.
FM STEREO indicator
does not light.
Poor FM signal being received.
Retune station or try another station
that broadcasts in stereo.
Station is not broadcasting in stereo.
TUNER is not selected.
Change stations.
AM or FM, no sound.
Press the TUNER Function button
to select Tuner.
Volume at minimum.
CD is not selected.
Increase volume.
Compact Disc Player
CD Player will not play.
Press the CD Function button
to select CD.
CD is not installed or is installed
incorrectly.
Insert CD with label facing up.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
General
No power.
AC adapter is not connected.
Connect AC adapter properly.
Insert batteries correctly.
Remote not working.
Batteries not inserted, or inserted
incorrectly.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
REMOTE SECTION
Power Source .....................................................................................................DC IN 12V
Speakers............................................................................................................2 x 6 Ohms
Output Power......................................................................................2 x 10W @ 10%THD
RADIO SECTION
Frequency Range (FM) ................................................................................87.5 - 108MHz
Frequency Range (AM)................................................................................530 - 1710KHz
CD SECTION
Disc Diameter...............................................................................................4.72” (120mm)
NEVER INSERT 3.15 (80MM) single CDs into the CD compartment as it will damage
the unit.
Optical Source.....................................................................................Semiconductor laser
Specifications are subject to change without notice.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|