MX4100.O/M.QXD 4/30/02 10:49 AM Page 17
HOME AUDIO SYSTEM WITH CD
PLAYER AND AM/FM STEREO RADIO
MODEL: MX4100
BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE
INSTRUCTIONS COMPLETELY.
OPERATING INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:48 AM Page 2
SAFETY INSTRUCTIONS
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
LASER SAFETY: This unit employs a laser. Only qualified service personnel should attempt to service
this device due to possible eye injury.
CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURE HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment
may cause harmful interference unless the modifications are expressly approved in the instruction manual.
The user could lose the authority to operate this equipment if an unauthorized change or modification is
made.
PREPARATION FOR USE
AC Operation
Unwind the AC power cord and extend it to its full length. Insert the small end of the AC power cord into the
AC socket on the back cabinet of the unit. Insert the other end of the AC power cord into any convenient
120V 60Hz household outlet.
Please note that this unit is equipped with a polarized AC
plug which has one blade wider than the other. This is a
safety feature to reduce the likelihood of electric shock. This
polarized AC plug will only fit in a polarized AC outlet. If you
find that you cannot insert this plug into your outlet, you
may have an obsolete non-polarized outlet. Please do not
try to defeat this safety feature by using a non-polarized
adapter or by filing the wider blade to make it fit into your
outlet. If this plug does not fit into your outlet, you should contact a qualified licensed electrician to replace
your obsolete outlet.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:48 AM Page 3
PREPARATION FOR USE (CONTINUED)
SPEAKER CONNECTION
UNIT
1. Place the speakers in convenient locations on either
side of the unit. Usually a distance of five to eight feet
between speakers provides the best stereo effect, but
this may vary depending on the size and acoustics of
the room.
R
L
2. Locate the Speaker Terminals on the rear of the unit
and connect the solid black wires to the red (+) terminals
and connect the striped wires to the black (–) terminals.
3. To connect the speakers, press the terminal down, insert
the speaker wire and press the terminal back to the lock
position.
SPEAKER
BOX
4. Pull lightly on the connection to make sure it is secure.
5. Connect the Speaker Light cable to the Speaker Light
jacks. These will light up the logo on the speakers.
CAUTION: Only connect the speakers which are supplied
with the unit. The use of any other or additional speakers
may cause damage to the unit. Never operate the unit
without the speakers connected.
L
R
BATTERY OPERATION
The battery compartment is located on the rear of the remote control.
• Remove the battery compartment door by pressing down and sliding the door in
the direction of the arrow.
• Insert two (2) AA size batteries into the battery compartment as shown to the right.
Be sure to observe the polarity markings which are engraved inside the battery
compartment. If the batteries are inserted incorrectly, the remote control will not
operate.
—
+
+
—
• Replace the battery compartment door.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
REMOTE SENSOR:
To operate the unit with the remote control, point the remote at the remote sensor on the front of the main
unit and press the appropriate button. The remote control has an effective operating range of approximately
15 feet and an angle of no more than 30°.
NOTE: Bright sunlight may interfere with the operation of the remote control.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:48 AM Page 4
LOCATION OF CONTROLS AND INDICATORS
MAIN UNIT
1
2
3
12
13
14
4
5
6
7
8
9
15
16
17
18
19
10
11
20
1. POWER Button
2. STANDBY Indicator
3. Display
11. Headphones jack
12. CD EJECT Button
13. Speaker Jacks (Rear of Unit)
4. Remote Sensor
14. Speaker Light Jacks (Rear of Unit)
5. TUNER/BAND Button
6. COLOR MODE Button
7. REPEAT/MEMORY UP Button
8. RANDOM/MEMORY DOWN Button
9. MEMORY/CLOCK SET Button
10. VOLUME Button
15. Tuning CD Skip/Search
16. EQ Button
17. PLAY/PAUSE Button
18. CD STOP(I) Button
19. CD Compartment
20. AC Cord (Rear of Unit)
/
Buttons
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:48 AM Page 5
LOCATION OF CONTROLS AND INDICATORS
REMOTE
1
2
15
3
16
17
4
5
6
7
18
19
20
21
8
9
10
11
12
13
14
1. CD EJECT Button
2. Direct Track Selection Buttons
3. OVER Button
14. COLOR MODE Button
15. POWER Button
16. MUTE Button
4. EQ Button
5. EX-BASS Button
17. VOLUME UP/DOWN Buttons
18. CD Mode Button
19. TUNER/BAND Button
20. MEMORY/CLOCK SET Button
21. RANDOM Button
6. PLAY/PAUSE (❿ ) Button
7. CD STOP(I) Button
8. TUNING DN/UP Buttons
9. MEMORY UP Button
10. MEMORY DOWN Button
11. REPEAT Button
12. DISPLAY Button
13. INTRO Button
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:48 AM Page 6
OPERATING INSTRUCTIONS
SETTING THE CLOCK
1
2
3
2
2
1
1
3
3
With the power off, press the Press the TUNING/CD Skip/ Press the TUNING/CD Skip/
MEMORY/CLOCK SET button; Search ( ) ❶ or ( ) ❷ button Search ( ) ❶ or ( ) ❷ button
the hours will blink.
to set the current hour, then press to set the current minute. Press
the MEMORY/ CLOCK SET the MEMORY/CLOCK SET
button ❸ again; the minute digits button ❸ and the time will be set.
will blink.
CHANGING THE LIGHTING IN THE DISPLAY
When the unit is first turned on, the display is purple. To change the color of the display, follow the
instructions below.
1
2
Press and hold the COLOR
Press the COLOR MODE button
MODE button and the display will when the desired color appears.
start changing colors and press
the COLOR button again to
memorize the desired color.
When the AC cord is removed and
then plugged in again, the display
will be purple.
X BASS
DISPLAY BUTTON
HEADPHONE JACK
1
1
1
To enhance the overall bass Press to show the clock on the To listen to the unit through
sound, simply press the X BASS display.
button on the remote or press and
hold the EQ button on the main
unit until the BASS indicator
lights.
headphones, simply insert the
headphones (not included) into the
Headphones jack. The speakers
will be disconnected when the
Headphones are plugged in.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:48 AM Page 7
OPERATING INSTRUCTIONS (CONTINUED)
LISTENING TO THE RADIO
1
2
3
Press the POWER button to turn Press the TUNER/BAND button; Press the TUNER/BAND button
the unit on; the STANDBY “TUNER” will appear in the to select AM or FM.
indicator will go out.
display.
NOTE: If you select the FM band,
be sure to extend the FM Wire
Antenna.
4
5
6
1
2
1
2
Press the TUNING/CD Skip/Search
❶ or ❷ button to select a
Adjust the X-BASS (on remote), When you have finished listening,
EQ ❶ and VOLUME ❷ buttons as press the POWER button to turn
station (see Tuning note below).
NOTE: If the FM band is selected
and you have tuned to an FM Stereo
station, the FM Stereo indicator will
light in the display.
the unit off; the STANDBY
indicator will light.
desired.
TUNING:
MANUAL TUNING: Repeatedly press the TUNING/CD Skip/Search
frequency in the display up or down until the desired frequency appears.
AUTOMATIC TUNING: Press and hold the TUNING/CD Skip/Search
or
or
to manually advance the
until the frequency in the
display starts to scan, and then release the button; the tuner will search and then stop on the next strong
station it finds. Repeat this procedure until the desired frequency appears in the display.
Hints for Better Reception
FM - Make sure that the FM Wire Antenna is extended to its full length. You may have to vary the direction
of the antenna to find the strongest signal for each FM station.
AM - The AM ferrite bar antenna is located inside the unit. It may be necessary to turn the unit slightly so
that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to
find the position that provides the strongest reception for each of your favorite AM stations.
MUTE
To temporarily mute the sound, press the MUTE button on the
1
remote control; the Mute indicator will appear in the display and the
sound will be muted. Press the MUTE button again to restore the
sound and the Mute indicator will disappear from the display.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:48 AM Page 8
OPERATING INSTRUCTIONS (CONTINUED)
SETTING RADIO PRESETS
This unit can preset 20 AM and 20 FM radio stations for convenient recall.
1
2
3
2
1
Press the POWER button to turn Press the TUNER/BAND button; Use the TUNER/CD Skip/Search
the unit on; the STANDBY “TUNER” will appear in the
(
) ❶ or (
) ❷ button to
indicator will go out.
display.
select a station.
Press the TUNER/BAND button
again to select the desired band -
FM or AM.
4
5
6
2
1
3
5
Press the MEMORY/CLOCK SET Press the MEMORY/CLOCK SET Repeat steps 3 through 5 to
button ❶. Within 4 seconds, press button again to set the station in program up to 20 stations in each
the selected memory.
band, if desired.
the REPEAT/MEMORY UP button
❷ until the desired memory
number appears on the display.
In case the main power supply
is interrupted, the memory
presets will be erased.
RECALLING RADIO PRESETS
1
2
3
1
1
2
1
2
2
Follow steps 1 and 2 above.
Press the REPEAT/MEMORY UP Adjust the X-BASS (on remote),
❶ or RANDOM/MEMORY DOWN EQ ❶ and VOLUME ❷ buttons as
❷ button to select a preset; the desired.
station will automatically be tuned
in.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:49 AM Page 9
OPERATING INSTRUCTIONS (CONTINUED)
PLAYING COMPACT DISCS
NORMAL PLAYBACK
This unit can play standard compact discs, as well as CD-R and CD-RW Compact discs.
1
2
3
CD
G reatest
Press the POWER button to turn Press the CD STOP (I) button to Insert a CD with the label side
the unit on; the STANDBY
indicator will go out.
facing to the right. If the CD is
inserted incorrectly, it will auto
eject.
select CD.
IMPORTANT: 3 inch single CDs
CANNOT be used with this unit.
4
5
6
1
2
The CD player will read the table
of contents on the disc and the
total number of tracks and total
playing time on the disc will
appear in the display.
Adjust the X-BASS (on remote),
EQ ❶ and VOLUME ❷ buttons as
desired. Playback will continue
until all the tracks on the disc
have been played.
Press the PLAY/PAUSE (❿ )
button to begin playback on
Track 1.
7
8
9
To stop playback before the disc After the last track has been Remove your disc and press the
ends, press the CD STOP (I) played, the disc stops automa- POWER button to turn the unit
tically and the display shows the off; the STANDBY indicator will
total number of tracks and playing light.
time on the disc. If you are finished
button. The disc will stop and the
display will show the total number
of tracks and playing time on the
disc.
listening, press the CD EJECT
button to eject the CD.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:49 AM Page 10
OPERATING INSTRUCTIONS (CONTINUED)
CD PAUSE CONTROL
1
2
During CD playback, if you wish
to pause the disc momentarily,
press the PLAY/PAUSE (❿ )
button again. Playback stops but
the disc continues to spin and the
time display will blink.
Press the PLAY/PAUSE (❿
button again to release pause and
resume normal CD playback.
)
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
1
2
3
2
1
1
2
After you insert the disc into the CD
player and the total number of tracks
appear on the display, you may press
You can also use the Direct Track When the desired track number
Selection buttons ❶ on the appears in the display, press the
remote to directly select a track. If PLAY/PAUSE (❿ ) button.
either the CD Skip/Search (
or ( ) ❷ button to select a specific
track for playback.
) ❶
Playback will begin on the track
the track is over 9, press the
you selected.
OVER button ❷ first.
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH (
/
)
1
2
3
During playback, depress and
hold either the CD Skip/Search
(
) or (
) button to move the
player forward or backward within
a track to locate a specific
musical passage. The player will
move forward or backward at high
speed as long as the button is
depressed. When you release the
During playback, press the CD During playback, press the CD
Skip/Search ( ) button once to Skip/Search ( ) button once to
advance the player to the move the player back to the
beginning of the next track. Press beginning of the current track. Press
CD Skip/Search (
) or (
)
button, normal playback will
resume at that point.
the CD Skip/Search (
) button the CD Skip/Search (
) button
repeatedly to advance the player repeatedly to move the player back
to higher number tracks.
to lower numbered tracks.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:49 AM Page 11
OPERATING INSTRUCTIONS (CONTINUED)
REPEAT PLAYBACK
1
2
3
2
2
4
1
1
2
1
To repeat all of the tracks on a To repeat a single track, press the To cancel Repeat Playback,
disc continuously, press the REPEAT/MEMORY UP button ❶ press the REPEAT/MEMORY UP
REPEAT/MEMORY UP button ❶
button
❶
until “REPEAT”
twice; “REPEAT ONE” will blink in
once; “REPEAT ALL” will light the display. Press the CD disappears from the display. You
solid in the display. Press the CD Skip/Search (
PLAY/PAUSE (❿ ) button ❷ to button ❸ to select the specific
) ❷ or (
)
can also cancel Repeat Playback
by pressing the CD EJECT button
❷.
begin all tracks repeat.
track that you wish to repeat.
When the desired track number
appears in the display, press the
PLAY/PAUSE (❿ ) button ❹ to
begin playback. The specific track
you selected will be repeated
continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 30 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 30 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
2
3
CD
G reatest
Press the CD STOP (I) button to Insert a CD with the label side Press the MEMORY/CLOCK SET
facing to the right. If the CD is button. “P-01” (program number),
inserted incorrectly, it will auto “00” (track number) will appear
select CD.
eject.
and “MEMORY” will appear in the
Wait for the CD player to read the display.
table of contents and display the
total number of tracks and playing
time of the disc.
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:49 AM Page 12
OPERATING INSTRUCTIONS (CONTINUED)
4
5
6
2
2
2
1
1
1
3
3
3
Press the CD Skip/Search (
or ( ) button ❷ to select the first
track that you wish to program. the next track you wish to
) ❶ Press either the CD Skip/Search Repeat step 5 until you have
(
) ❶ or ( ) button ❷ to select programmed up to 30 track
numbers into the CD Program
Memory.
When the desired track number
appears in the display, press the
MEMORY/CLOCK SET button ❸
again.
program. When the desired track
number appears in the display,
press the MEMORY/ CLOCK SET
button ❸ again.
After programming up to 30 tracks in the CD Program Memory, press
the PLAY/PAUSE (❿ ) button ❶ to begin programmed playback.
“MEMORY” will appear in the display and playback will begin on the
first track that you programmed. The player will continue to play all of
the tracks that you programmed in the order in which you programmed
them. When the last programmed track has been played, the player
will stop and the display will again show the total number of tracks on
the disc. If you press the MEMORY/CLOCK SET button ❷ and then
7
1
press the PLAY/PAUSE (❿ ) button ❶ again, playback will start on
the first track you programmed and will continue until all the
programmed tracks have been played. To cancel the Programmed
Playback mode, press the MEMORY/CLOCK SET button ❷ to enter
the program mode, and then press the CD STOP (I) button ❸ twice.
2
PROGRAMMED REPEAT
1
2
3
It is also possible to use the Program
and Repeat functions together to Press the PLAY/PAUSE (❿ )
Program Repeat operation will
continue indefinitely until you
press the CD STOP (I) button.
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
repeat a specific program indefinitely.
First, program the tracks you wish to
hear in the order you wish to hear
them, as described above. Then,
press the REPEAT/MEMORY UP
button twice. Both the MEMORY and
REPEAT indicators will appear in the
display.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:49 AM Page 13
CARE AND MAINTENANCE
Caring for Compact Discs
• Treat the compact disc carefully. Handle the compact disc
only by its edges. Never allow your fingers to come in contact
with the shiny, unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to the compact
disc label.
• Clean the compact disc periodically with a soft, lint-free, dry
cloth. Never use detergents or abrasive cleaners to clean
the compact disc. If necessary, use a CD cleaning kit.
• If a compact disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged (scratched).
• When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer
edge of the compact disc. Never wipe in circular motions.
Z
COMPACT
• This unit is designed to play only compact discs bearing the identification logo as shown here.
Other compact discs may not conform to the CD standard and may not play properly.
• Compact discs should be stored in their cases after each use to avoid damage.
DIGITAL AUDIO
• Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc. Prolonged
exposure or extreme temperatures can warp the compact disc.
• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink may
damage the surface.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:49 AM Page 14
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptom
Radio
Possible Cause
Solution
Noise or sound distorted
on radio broadcasts.
Station not tuned properly for
AM or FM.
Retune the AM or FM broadcast
station.
FM: Wire Antenna is not
extended.
Extend FM Wire Antenna.
AM: Unit is not positioned
correctly.
Rotate unit until best reception is
obtained.
FM STEREO indicator
does not light.
Poor FM signal being received.
Retune station or try another station
that broadcasts in stereo.
Station is not broadcasting in stereo.
Change stations.
AM or FM, no sound.
TUNER/Band Function button
is not pressed.
Press the TUNER/Band Function button
to select Tuner.
Volume at minimum.
Increase volume.
Compact Disc Player
CD Player will not play.
CD function is not selected.
Press the CD STOP (I) button to
select CD.
CD is not installed or installed
incorrectly.
Insert CD with label facing the right.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
General
No power.
AC power cord is not connected.
Connect AC power cord.
Insert batteries correctly.
Remote not working.
Batteries not inserted, or inserted
correctly.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:49 AM Page 15
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMCORPINC.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MX4100.O/M.QXD 4/30/02 10:49 AM Page 16
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|