MKS2461 O/M.QXD 8/27/01 10:45 AM Page 20
PORTABLE CD/CD+G KARAOKE
SYSTEM WITH AM/FM RADIO AND
CASSETTE RECORDER
MODEL: MKS2461
BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE
INSTRUCTIONS COMPLETELY.
OPERATING INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical
enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get
the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion-and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what
sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want
you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage
from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries
Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise.
This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
We
WantYou
LISTENING
ForALifetime
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 3
SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions
carefully. Please note that these are general precautions and may not
pertain to your unit. For example, this unit may not have the capability
to be connected to an outdoor antenna.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
1. READ INSTRUCTIONS
Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes, and requirements for grounding electrode.
Do not use attachments not recommended by the product's
manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water- for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury and serious damage to
the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the
PORTABLE CART WARNING
(symbol provided by RETAC)
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
surfaces may cause the appliance and cart
18. SERVICING
combination to overturn.
9. VENTILATION
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation and to ensure reliable operation of the product
and to protect it from overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat source. This
product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
10. POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment o other controls may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
f.
When the product exhibits a distinct change in performance - this
indicates a need for service.
13. LIGHTNING
23. HEAT
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
14. POWER LINES
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 4
LOCATION OF CONTROLS
1
20
21
22
23
24
25
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
26
27
28
29
30
18
19
1. Carrying Handle
2. CD Compartment
18. Cassette Buttons (right to left):
PAUSE ( )
3. Dial Scale and Pointer
4. Stop (I) Button
5. POWER Button
6. Indicators (PLAY/PAUSE, REPEAT,
PROGRAM, POWER)
STOP/EJECT (
)
FAST FORWARD (❿❿)
REWIND (➛➛)
PLAY (❿)
RECORD ( )
7. ECHO Control
19. Speaker
8. Microphone Handle
20. CD Open/Close Area
21. TUNING Control
22. BASS Control
9. MIC1 VOLUME Control
10. MIC 2 VOLUME Control
11. Microphone jacks
23. CD Display
12. AUDIO/VIDEO OUT Jacks (Rear of Unit)
13. VOCAL (MUSIC/NORMAL/VOCAL) Switch
14. REPEAT Button
24. TREBLE Control
25. VOLUME Control
26. Headphone Jack
27. PROG. (Program) Button
15. Skip/Search
Button
16. Function (RADIO/TAPE/CD) Switch
17. Cassette Compartment
28. Skip/Search
29. Band (AM/FM) Switch
Button
30. Play/Pause (❿/ ) Button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 5
POWER SOURCE
AC:
Use the AC polarized line cord included with the unit for
operation on AC power. Insert into a conveniently located AC
outlet having 120V, 60Hz.
NOTE: The AC plug supplied with the unit is polarized to help
minimize the possibility of electric shock. If the AC plug does
not fit into a nonpolarized AC outlet, do not file or cut the wide
blade. It is the user’s responsibility to have an electrician
replace the obsolete outlet.
CONNECTIONS
CONNECTING THE UNIT TO A TELEVISION
From
Video
Out
From
Audio
Out
To
Video
In
To
Audio In
MKS2461
TELEVISION
NOTES FOR CONNECTING TO A TV:
•
Connecting the unit to a TV will allow you to broadcast the unit’s sound through the TV. If playing a
CD+G disc, you will also see video and lyrics on the TV.
•
•
When connecting the unit, refer to the owner’s manual of the TV, as well as this manual.
When connecting the unit to the TV, make sure the power is off and both units are unplugged before making
any connections.
•
If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local
electronics supply store.
•
•
After connecting, set the Audio mode on the TV to the desired audio setting.
If your TV does not have a video in jack, you can use an RF modulator (not included).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 6
CONNECTIONS (CONTINUED)
CONNECTING THE UNIT TO A TELEVISION AND A RECEIVER/HOME STEREO
From
Video
Out
From
Audio
Out
To
Video
In
TELEVISION
MKS2461
RECEIVER OR HOME STEREO
To
Audio In
NOTES FOR CONNECTING TO A TV AND A RECEIVER/HOME STEREO:
•
Connecting the unit to a receiver/home stereo will allow you to broadcast the unit’s sound through the
receiver/home stereo's speakers. If playing a CD+G disc, you will also see video and lyrics when
connecting the video cables to the TV.
•
•
•
When connecting the unit, refer to the owner’s manual of the TV and receiver/home stereo, as well as
this manual.
When connecting the unit , make sure the power is off and both units are unplugged before making any
connections.
If your TV does not have a video in jack, you can use an RF modulator (not included).
CONNECTING THE MICROPHONE(S)
This unit has two microphone jacks, use one with the supplied microphones, which will allow you to sing
along with your favorite songs. Before connecting, make sure the MIC VOLUME Controls are set to
minimum.
If only connecting one microphone, connect it to the MIC1 jack.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 7
RADIO OPERATION
1
2
3
3
3
2
1
1
2
Press the POWER button to turn Slide the Function switch ❶ to the Adjust the VOLUME ❶ , TREBLE
the unit on; the POWER indicator
will light.
RADIO position and the BAND ❷ and BASS ❸ controls as
switch ❷ to the AM or FM
position. Rotate the TUNING
control ❸ to select a station.
desired.
4
ANTENNAS
AM – This unit has a built-in ferrite rod antenna, which provides
adequate reception in most areas. If reception is weak, turn the unit to
improve reception.
FM – The FM antenna is built into the AC cord. If reception is weak,
adjust the length and the angle of the cord.
Press the POWER button to turn
the unit off; the POWER indicator
will turn off.
BASS AND TREBLE CONTROLS
Use these controls to adjust the Bass and Treble as desired.
COMPACT DISC (CD) OPERATION
TO INSERT A CD
1
2
3
1
2
Press the CD Door OPEN/CLOSE Press the POWER button ❶ to The total number of tracks will be
area to open the CD compartment
door. Place a CD on the center
spindle, with the printed label side
facing up. Close the CD
compartment door.
displayed and the CD player will
stop.
turn the unit on; the POWER
indicator will light. Slide the
Function switch ❷ to the CD
position.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 8
COMPACT DISC (CD) OPERATION (CONTINUED)
TO PLAY A CD
1
2
3
3
1
2
Slide the Function switch to the To play a disc from the beginning, To start from a specific track,
CD position. Insert a CD as
described in the TO INSERT A button. Press the Play/Pause
press the Play/Pause (❿/
)
locate the track using the
Skip/Search ❶ or
❷
CD section on page 7.
(❿/ ) button again to pause
playback; the PLAY/PAUSE
indicator will blink.
button and press the Play/Pause
(❿/ ) button ❸.
4
5
6
3
2
1
1
1
2
2
Adjust the VOLUME ❶ , TREBLE To skip forward or backward To search forward or backward
through the tracks on the disc, through the disc, press and hold
❷ and BASS ❸ controls as
press the Skip/Search
❶ or the Skip/Search
❶ or
❷
desired.
❷ button.
button, a chattering noise will be
heard.
7
8
FAQS:
Do I need an adapter to play 3”
singles?
No, simply insert the 3” single into
the groove.
What is the maximum time for a
CD in this unit?
The maximum time is 74 minutes.
When the disc is through playing, Press the POWER button to turn
it will stop rotating. Press the Stop the unit off; the POWER indicator
(I) button to stop the disc before will turn off.
it is finished.
NOTES:
• If a disc is inserted incorrectly, dirty, damaged or not present at all, it will not play.
• As each track is played, the track number is shown in the display.
• To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for the disc to
stop before opening the CD door. Never touch the lens when the CD compartment door is open.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 9
COMPACT DISC (CD) OPERATION (CONTINUED)
TO REPEATEDLY PLAY BACK ONE TRACK
1
2
3
3
2
1
2
1
Slide the Function switch to the Select
a
track using the Press the REPEAT button ❶
❶ or
button and press the Play/Pause blink and the unit will play the
CD position. Insert a CD as Skip/Search
described in the TO INSERT A
CD section on page 7.
❷
once, the REPEAT indicator will
selected track over and over until
(❿/ ) button ❸.
the Stop (I) button ❷ is pressed.
TO REPEATEDLY PLAY BACK ALL TRACKS ON A CD
1
2
3
2
1
Slide the Function switch to the Press the REPEAT button twice,
CD position. Insert a CD as the REPEAT indicator will light.
described in the TO INSERT A
Press the Play/Pause (❿/
)
button ❶ to begin playback and
the unit will play the entire disc
over and over until the Stop (I)
button ❷ is pressed.
CD section on page 7.
NOTE:
To stop and cancel Repeat playback, press the Stop (I) button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 10
COMPACT DISC (CD) OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
2
3
1
2
Slide the Function switch to the Press the PROGRAM button, the Use the Skip/Search
❶ or
CD position. Insert a CD as PROGRAM indicator and display
described in the TO INSERT A will blink.
CD section on page 7.
❷ button to select the first track to
be programmed.
4
5
6
1
2
Press the PROGRAM button Repeat steps 3 and 4 to program
again; the selected track has now the other desired tracks in button to begin playback; the
Press the Play/Pause (❿/
)
been programmed.
sequence (up to 20 tracks).
Program indicator will light and
the tracks will play in the order
programmed.
NOTES
•
•
•
Programming is the ability to preselect the order in which a series of tracks will be played.
Each track may be stored in the program memory as many times as desired (up to 20 tracks).
As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the Skip/Search
or
button.
•
The CD player will stop after all programmed tracks have been played or the Stop (I) button is
pressed.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 11
CASSETTE TAPE OPERATION
PLAYING CASSETTE TAPES OR KARAOKE
1
2
3
2
1
Press the POWER button ❶ to
turn the unit on; the POWER
indicator will light. Slide the
Function switch ❷ to the TAPE
position.
Press the PLAY (❿) button to
begin playback.
Press the STOP/EJECT (
)
button to open the Cassette Door
and insert a cassette with the
open end facing down.
4
5
6
3
2
2
1
3
1
Adjust the VOLUME ❶ , TREBLE To advance or rewind the tape To pause playback momentarily,
rapidly, press either the F.FWD
(❿❿) ❶ or REWIND (➛➛) ❷
❷ and BASS ❸ controls as
desired.
press the PAUSE ( ) button. The
tape movement stops but the tape
button. When you reach the motor is still running. Press the
desired point, press the PLAY
(❿) button ❸ to resume normal
playback.
PAUSE ( ) button again to
release pause and resume
normal playback.
KARAOKE:
7
8
If you would like to sing along with
a tape, simply play the tape,
insert a microphone and sing
along!
If you insert a Karaoke tape, you
can set the VOCAL switch to one
of the following positions:
MUSIC: Plays instruments, but
not vocals.
NORMAL: Plays instruments and
vocals.
VOCAL AUTO: Plays instruments
with vocals, but the vocals will
stop when you start singing into
the microphone.
1
2
To stop playback before the tape When the tape reaches the end,
ends, press the STOP/EJECT the auto-stop mechanism
activates, the PLAY (❿) button ❶
is released and the tape motor
shuts off. Press the STOP/EJECT
) button ❷ to open the
Cassette Door and remove the
tape.
(
) button. The PLAY (❿)
button is released and the tape
motor shuts off.
(
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 12
KARAOKE OPERATION
KARAOKE RECORDING FROM A CD OR CD+G (COMPACT DISC + GRAPHICS) DISC
You can record onto a cassette tape from a CD+G karaoke or standard CD. CD+G discs combine the
recorded music with an additional video track that displays the song lyrics on a television screen. As the song
plays, the words to be sung are highlighted in a different color.
1
2
3
2
1
Slide the Function switch to the CD
position and insert a CD or CD+G
disc. Insert the microphone into the
appropriate jack.
Press the STOP/EJECT (
)
Press the PAUSE ( ) button ❶,
then press the RECORD
utton ❷ (the PLAY button will be
button to open the Cassette Door
and insert a cassette with the
open end facing down.
(
)
b
automatically depressed).
4
5
6
2
2
1
1
1
Slide the VOCAL switch to select one
of the following positions:
MUSIC: Plays instruments, but not
vocals.
NORMAL: Plays instruments and
vocals.
VOCAL AUTO: Plays instruments
with vocals, but the vocals will stop
when you start singing into the
microphone.
Press the PAUSE button ❶ to Adjust the MIC1/MIC2 VOLUME
controls ❶ as desired. Increasing
this control will increase the
volume of the respective
microphone. Adjust the ECHO
control ❷ to add an echo effect to
your voice. The ECHO control ❷ is
variable so add as much or as little
reverb as desired.
release pause and then press the
CD Play/Pause (❿/ ) button ❷ to
start CD/CD+G playback.
If connected to a TV and using a
CD+G disc, the image and lyrics
will appear on the TV.
NOTES:
7
8
•
Refer
to
SAFEGUARD
ACCIDENTAL
AGAINST
ERASURE section (page 14) if
the RECORD button cannot
be pressed.
•
Keep the microphone away
from the unit to avoid
feedback.
Sing
or
talk
into
the When you are finished recording,
microphone(s) and both the
CD/CD+G and the microphone(s)
will be recorded onto the
cassette.
press the STOP/EJECT (
button to stop the tape.
)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 13
KARAOKE OPERATION (CONTINUED)
RECORDING FROM THE RADIO
You can record onto a cassette tape from the built-in radio.
1
2
3
Slide the Function switch to the
RADIO position and tune a station.
Insert the microphone into the
appropriate jack.
Press the RECORD
(
) button
Press the STOP/EJECT (
)
(the PLAY button will be
automatically depressed) to start
recording.
button to open the Cassette Door
and insert a cassette with the
open end facing down.
4
When you are finished recording,
press the STOP/EJECT (
button to stop the tape.
)
NOTES:
•
Refer to SAFEGUARD AGAINST ACCIDENTAL ERASURE section (page 14) if the RECORD button
cannot be pressed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 14
CARE AND MAINTENANCE
SAFEGUARD AGAINST ACCIDENTAL ERASURE
When a new recording is made, any program
material previously recorded is automatically
erased and only the new recording remains. To
safeguard valuable recordings from being erased
accidentally, the cassette and the deck are
equipped with a special device.
On the back of the cassette there is an erase
prevention tab on each side. To prevent
accidental erasing, break out these tabs with a
screwdriver. If only one side of the tape is to be
protected, break out the tab on the left side with
the side desired facing you.
Tab for side 2
S I D E 1
Tab for side 1
Tab
To record on a tape in which the tab has been
broken, place a piece of adhesive tape over that
area.
Break out the tab
NOTE: When a tab is broken out, the record
button cannot be depressed.
Cover with tape
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15 (C-30), 30 (C-60) and 45 (C-90) minutes of recording time on each side.
Longer length tapes of 60 (C-120) minutes of recording time on each side are not recommended. Use only
high quality tapes. If a problem develops, check the unit first with another cassette to determine if the
problem is with the cassette, and not with the unit.
If there is any slack in the cassette, it should be removed before inserting the cassette. Place a pencil in one
of the hubs and rotate it clockwise until all slack is taken up.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 15
CARE AND MAINTENANCE (CONTINUED)
Caring for Compact Discs
• Treat the disc carefully. Handle the disc only by its edges.
Never allow your fingers to come in contact with the shiny,
unprinted side of the disc.
• Do not attach adhesive tape, stickers, etc. to the disc label.
• Clean the disc periodically with a soft, lint-free, dry cloth.
Never use detergents or abrasive cleaners to clean the
disc. If necessary, use a CD cleaning kit.
• If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
• When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the disc.
Never wipe in circular motions.
Z
COMPACT
• This unit is designed to play only compact discs bearing the identification logo as shown here.
Other discs may not conform to the CD standard and may not play properly.
DIGITAL AUDIO
• Compact Discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc. Prolonged
exposure or extreme temperatures can warp the disc.
• Do not stick or write anything on either side of the disc. Sharp writing instruments, or the ink may damage
the surface.
Cleaning the unit
• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
• Mild soap and a damp cloth may be used on the front panel.
• Periodic cleaning of the tape heads, capstan and pinch roller is necessary to maintain good sound
reproduction. Clean them after every 100 hours of use or less if playback has deteriorated. Use a cotton
swab moistened with head cleaning solution or isopropyl alcohol, then wipe dry with another swab.
NOTE: Never use metal objects on or near the tape heads. Do not allow any cleaning material to fall into the
tape assembly.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 16
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptom
Radio
Possible Cause
Solution
Noise or sound distorted
on radio broadcasts.
Station not tuned properly for
AM or FM.
Retune the AM or FM broadcast
station.
FM: AC cord is not fully extended
or uncoiled.
Extend AC cord.
AM: Unit is not positioned
correctly.
Rotate unit until best reception is
obtained.
AM or FM, no sound.
Band switch not on AM or FM.
Volume at minimum.
Slide to select AM or FM .
Increase volume.
Cassette Player
No sound.
Function switch not set to TAPE.
Volume at minimum.
Dirty head.
Slide to the TAPE position.
Increase volume.
Clean the head.
Sound distorted.
Speed varies.
Tape old.
Replace the tape.
Replace the tape.
Cassette tape worn out.
Cassette Recorder
Will not record.
Erase prevention tab removed.
Defective tape or dirty tape head.
Cover hole with adhesive tape.
Replace tape or clean tape head.
Distorted sound
on playback.
Compact Disc Player
CD Player will not play.
Function switch not set to CD.
Slide to the CD position.
CD is not installed or installed
upside-down.
Insert CD with label side up.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
General
No sound.
Power cord disconnected.
Connect power cord.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 17
TROUBLESHOOTING GUIDE (CONTINUED)
Symptom
Karaoke
Possible Cause
Solution
Some vocals are still
present when VOCAL
switch is set to OFF.
Using non-CD+G CD.
Backup vocals are supposed
to be included.
Use CD+G CD.
This is normal, only the main vocal(s)
are to be reduced.
Feedback is heard
when singing.
Microphone is too close to unit
or MIC Volume is too high.
Move microphone away from
unit or decrease MIC Volume.
Words do not appear
on TV screen.
Using non-CD+G CD.
Connections not done properly.
Use CD+G CD.
Connect to TV properly.
Using the radio.
When signing to the radio, the lyrics
do not appear on the screen.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMCORPINC.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 18
SPECIFICATIONS
GENERAL:
Power Source ..............................................................................................120V, 60Hz AC
Speaker ...................................................................................................................8 Ohms
Output Power.............................................................................................7W @ 10% THD
RADIO SECTION:
FM Frequency Range.....................................................................................88 - 108 MHz
AM Frequency Range ..................................................................................530 - 1710KHz
CD SECTION:
Disc Diameter...............................................................................................4.72” (120mm)
3.15” (80mm) Single CD
Optical Source....................................................................................Semiconductor Laser
Specifications are subject to change without notice.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS2461 O/M.QXD 8/27/01 10:45 AM Page 19
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|