MVDP1075
User’s Guide
7'' TFT DISPLAY PORTABLE DVD PLAYER
WITH REMOTE CONTROL
Before operating this product,
please read these instructions completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
CAUTION:
THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER’S
MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT
REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE
SERVICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE
ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE
IS OPENED. DO NOT STARE INTO BEAM.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
SURGE PROTECTORS:
It is recommended to use a surge protector for AC connection. Lightning and power surges
ARE NOT covered under warranty for this product.
LASER WARNING:
This unit employs a Laser only qualified service personal should attempt to service this device
due to possible eye injury.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Modification not authorized by the manufacture may void user authority to operated this
device.
FCC CAUTION:
To assure continued compliance, follow the attached installation instructions and use only
shielded cables when connecting to other devices. Also, any changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER
JUSQU’AU FOND.
IMPORTANT:
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE
YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Association’s Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
50
60
70
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
EIA
EST. 1924
We
WantYou
LISTENING
ForALifetime
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
NOTES ON HANDLING:
•
When shipping the DVD player, always use the original shipping carton and
packing materials. For maximum protection, repack the unit as it was
originally packed at the factory.
•
Do not use volatile liquids, such as insect spray, near the DVD player. Do not
leave rubber or plastic products in contact with the DVD player for a long
time. They will leave marks on the finish.
•
•
•
The top and rear panels of the DVD player may become warm after a long
period of use. This is normal and not a malfunction.
When the DVD player is not in use, be sure to remove the disc and turn off
the power.
If you do not use the DVD player for a long period, the unit may not function
properly in the future. Turn on and use the DVD player occasionally.
NOTES ON LOCATING THE DVD PLAYER:
•
When you place this DVD player near a TV, radio or VCR, the playback
picture may become poor and the sound may be distorted. In this case, move
the DVD player away from the TV, radio or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
•
For stubborn dirt, soak the cloth in a weak detergent solution, wring well and
wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as
thinner or benzene, as they may damage the surface of the DVD player.
•
If you use a chemical-saturated cloth to clean the unit, follow that product’s
instructions.
Warning: Cleaning and adjustment of lenses and/or other components of
playback mechanism should be performed by a qualified service technician.
CAUTION:
To reduce the risk of injury, only charge with supplied rechargeable Battery Pack;
other types of batteries may burst causing personal injury or damage.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS (CONTINUED)
TO OBTAIN A CLEAR PICTURE:
The DVD player is a high technology, precision device. If the optical pick-up lens
and disc drive parts are dirty or worn down, the picture quality becomes poor. To
obtain a clear picture, we recommend regular inspection and maintenance
(cleaning or parts replacement) every 1,000 hours of use depending on the
operating environment. For details, contact your nearest dealer.
NOTES ON MOISTURE CONDENSATION:
Moisture condensation damages the DVD player. Please read the following
carefully.
•
Moisture condensation occurs, for example, when you pour a cold drink into a
glass on a warm day. Drops of water form on the outside of the glass. In the
same way, moisture may condense on the optical pick-up lens inside this unit,
one of the most crucial internal parts of the DVD player.
Moisture condensation occurs during the following cases:
•
•
When you bring the DVD player directly from a cold place to a warm place.
When you use the DVD player in a room where you just turned on the heater,
or a place where the cold wind from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and humid place just after
you moved the unit from an air conditioned room.
•
•
When you use the DVD player in a humid place.
Do not use the DVD player when moisture condensation may occur.
•
If you use the DVD player in such a situation, it may damage discs and
internal parts. Remove the disc, insert the small end of the AC adapter into
the DC IN jack on the side of the unit and insert the other end into a
conveniently located AC outlet having 120 AC, 60 Hz, turn on the DVD player
and leave it “ON” for two or three hours. After two or three hours, the DVD
player will have warmed up and evaporated any moisture. Keep the DVD
player connected to the wall outlet and moisture condensation will seldom
occur.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCES
AC CONNECTION
Insert the small end of the AC adapter into the
jack on the side of the unit. Insert the other end
(with the 2 blades) into a conveniently located
AC outlet having 120V AC, 60Hz. DO NOT insert
into the DC IN CHARGE jack.
AC ADAPTER SPECIFICATIONS: DV9V Z
NOTES:
•
•
To disconnect the AC adapter, remove it
from the DC IN jack on the side of the unit as
well as from the AC outlet.
Use the enclosed AC adapter for this
product only.
To DC 9V IN Jack
BATTERY PACK INSERTION/REMOVAL
Follow the diagram below to insert or remove the battery pack.
Battery Release Switch
1
2
A
B
B
A
TO REMOVE: Slide the Battery Release
switch, then slide in the direction of the arrow
A, then arrow B.
TO INSERT: Align tabs from the battery into
the holes in the unit, then slide the battery in
the direction of the arrow A, then up in the
direction of arrow B.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCES (CONTINUED)
CHARGING THE BATTERY PACK
“LOW BATTERY” will appear on the screen when the battery is low and needs
recharging. The battery can be charged while attached or not attached to the unit
as follows:
WITH THE BATTERY ATTACHED TO THE UNIT:
With the battery pack attached, insert the small end of the AC adapter
into the DC IN CHARGE jack on the side of the battery pack or the DC IN
jack on the side of the unit. Insert the other end (with the 2 blades) into a
conveniently located AC outlet having 120V AC, 60Hz. The CHARGE indicator will
light red as the battery is charging and green when charging has completed.
Disconnect the AC adapter plugs when charging has finished.
WITH THE BATTERY NOT ATTACHED TO THE UNIT:
You can also charge the battery when it is not attached to the unit by inserting the
small end of the AC adapter into the DC IN CHARGE jack on the side of the battery
pack. Insert the other end (with the 2 blades) into a conveniently located AC outlet
having 120V AC, 60Hz. The CHARGE indicator will light red as the battery is
charging and green when charging has completed. Disconnect the AC adapter
plugs when charging has finished.
NOTE:
•
Fully charge the battery pack (8 hours) before using it for the first time. After the
initial charge, it should take approximately four hours to charge.
The battery can charge up for approximately 300 times.
•
•
A fully-charged battery can operate for about two hours.
USING THE CAR ADAPTER
Plug the small end of the car adapter into the DC IN jack and then plug the other
end into the car cigarette lighter socket.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
MAIN UNIT
1
2
11
12
13
14
15
3
4
5
6
7
8
16
17
18
9
10
1. Unit OPEN Switch
2. Display
3. Left Speaker
4. MENU Button
5. CHARGE Indicator (Side of the
Rechargeable Battery)
9. Disc Door OPEN Button
10. Remote Sensor
11. Right Speaker
12. LCD MODE Button
13. ENTER Button
14. Navigation (√,®, π,†) Buttons
6. DC IN CHARGE Jack 9V z
(Side of the Rechargeable
Battery)
15. SETUP Button
16. Power ON/Play/Pause (®p)
Button
7. DC IN Jack 9V z (Side of
17. Power OFF/Stop (I) Button
the Main Unit)
18. Power Indicator
8. Disc Compartment
9
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS (CONTINUED)
SIDE
1
2
3
4
5
6
7
1. VOLUME Control
2. Headphone Jack
3. AUDIO OUT Jack
5. S-VIDEO OUT Jack
6. Battery Release Switch
(Bottom of the Battery Pack)
7. Battery Pack
4. VIDEO/COAXIAL OUT Jack
1. DISPLAY Button
2. MENU Button
REMOTE
3. STANDBY Button
1
2
3
4. 0-9/10+ Number Buttons
5. PROGRAM Button
6. GOTO Button
16
17
7. TITLE Button
8. AUDIO Button
4
9. PLAY/ENTER Button
10. SETUP Button
18
19
11. STEP Button
12. SLOW Button
13. PAUSE Button
5
6
7
8
20
21
22
23
24
14. Skip (o) Button
15. Skip (n) Button
16. MUTE Button
17. REPEAT Button
18. REPEAT A-B Button
19. P/N (PAL/NTSC Button)
20. ANGLE Button
21. SUB-T Button
22. ZOOM Button
23. Navigation (√,®, π,†) Buttons
24. RESUME Button
25. SHUFFLE Button
26. Stop (I) Button
9
10
11
12
13
14
15
25
26
27
28
27. Search ®® Button
28. Search√√ Button
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
CONNECTING THE DVD TO A TV USING THE A/V CABLE (INCLUDED)
NOTES FOR CONNECTING TO A TV:
•
If your TV has an S-Video input, connect the DVD player with the S-Video cable
for best results.
•
•
Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
When connecting the DVD, refer to the owner’s manual of the TV, as well as
this manual.
•
•
When connecting the DVD to the TV, make sure the power is off and both units are
unplugged before making any connections.
Connect the DVD player to your TV directly. If you connect the DVD player
through a VCR, the playback picture will be distorted because DVD video discs
are copy protected.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A TV USING THE S-VIDEO CABLE (INCLUDED)
NOTES FOR CONNECTING TO A TV:
•
If your TV has an S-Video input, connect the DVD player with the S-Video cable
for best results.
•
•
Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
When connecting the DVD, refer to the owner’s manual of the TV, as well as
this manual.
•
•
When connecting the DVD to the TV, make sure the power is off and both units are
unplugged before making any connections.
Connect the DVD player to your TV directly. If you connect the DVD player
through a VCR, the playback picture will be distorted because DVD video discs
are copy protected.
•
•
When using the S-VIDEO output, you should set the Component output to TV in
the VIDEO SETUP menu. Otherwise, the picture on the TV screen will keep
rolling. See page 22 to set the Component Output to TV.
When the Component output is set to TV, the main unit’s screen display will turn
off automatically. To observe the pictures on the unit's display screen again,
power off the unit and power on again, the Component output will reset to LCD.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A HOME THEATRE SYSTEM (AUDIO JACK)
From Audio Out
From Video Out
Audio Cable (Included)
Video Cable (Included)
Place the subwoofer, front, rear and center
speakers in locations as shown/described
here. After correctly positioning the
To Audio Inputs
9
To Video
Input
speakers, perform the Tone Test on the AV
Amplifier and adjust the Volume control(s)
until the desired sound is achieved. For best
results, sit in the viewing position and have
someone adjust the volumes for you; this will
enable you to set the optimal levels.
3
1
2
5
4
NOTE: The rear speakers can also be
located on the side wall facing the viewing
position and each other. Make sure the
viewing position is located between the two
speakers in this case. Experiment to find
optimal position.
6
7
8
1. Front Left Speaker
6. Viewing/Listening Position–The best
2. Television
listening position is obtained by positioning the
chair, sofa, etc. in the middle of all the
speakers.
3. Center Speaker–can be located on top or
below the Television.
4. Sub-woofer–can be located anywhere in the
room.
7. Rear Left Speaker
8. Rear Right Speaker
5. Front Right Speaker
9. AV Amplifier w/Dolby Digital Decoder
NOTES FOR CONNECTING TO A TV:
•
Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
•
When connecting the DVD, refer to the owner’s manuals for the TV and the audio
system, as well as this manual.
•
•
When connecting, make sure the power is off and all units are unplugged before making
any connections.
Connect the DVD player to your TV directly. If you connect the DVD player through a
VCR, the playback picture will be distorted because DVD video discs are copy protected.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A HOME THEATRE SYSTEM (COAXIAL JACK)
From Video/Coaxial Out
VIDEO/COAXIAL CABLE (INCLUDED)
Place the subwoofer, front, rear and center
speakers in locations as shown/described
here. After correctly positioning the
speakers, perform the Tone Test on the AV
Amplifier and adjust the Volume control(s)
until the desired sound is achieved. For best
results, sit in the viewing position and have
someone adjust the volumes for you; this will
enable you to set the optimal levels.
To PCM/BITSTREAM
9
To Video
Input
3
1
2
5
4
NOTE: The rear speakers can also be
located on the side wall facing the viewing
position and each other. Make sure the
viewing position is located between the two
speakers in this case. Experiment to find
optimal position.
6
7
8
1. Front Left Speaker
6. Viewing/Listening Position–The best
2. Television
listening position is obtained by positioning the
chair, sofa, etc. in the middle of all the
speakers.
3. Center Speaker–can be located on top or
below the Television.
4. Sub-woofer–can be located anywhere in the
room.
7. Rear Left Speaker
8. Rear Right Speaker
5. Front Right Speaker
9. AV Amplifier w/Dolby Digital Decoder
NOTES FOR CONNECTING TO A TV:
•
Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
•
When connecting the DVD, refer to the owner’s manuals for the TV and the audio
system, as well as this manual.
•
•
•
When connecting, make sure the power is off and all units are unplugged before making
any connections.
Connect the DVD player to your TV directly. If you connect the DVD player through a
VCR, the playback picture will be distorted because DVD video discs are copy protected.
Set the SPDIF option to PCM, see page 19.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT DISCS
The region number for this DVD Player is:
See the following page for information regarding region numbers.
1
PLAYABLE DISCS:
The following discs can be played back on this DVD player:
DISC TYPES:
DVD
Data on most DVDs is divided into sections
called “titles” and then into subsections called
“chapters”, each of which is given a title or
chapter number. Some features of this DVD
player will not operate with some DVD discs
as they are preset. If a function you selected
does not run as desired, refer to the manual
accompanying the DVD disc.
AUDIO CD
Data on an audio CD is divided into sections
called “tracks”, each of which is given a track
number.
IMPORTANT:
It is important that you read the manual that accompanies the DVD disc, as there are
features that are on the DVD player that cannot be used with certain DVDs. There are also
extra features on the DVD disc that are different for each DVD disc, so they are not
explained in this owner’s manual.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT DISCS (CONTINUED)
Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public
and rent copyrighted material without permission. DVD video discs are copy
protected, and any recordings made from these discs will be distorted. This product
incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only, unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Region Management Information:
This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the Region number of this DVD
player, this DVD player cannot play that disc. You may not be able to play back
some DVD video discs on this player if they were purchased from outside your
geographic area or made for business purposes. When you try to play back an
unauthorized disc, "Wrong Region" appears on the TV screen.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
The Setup Menu lets you customize the DVD player by allowing you to select
various language preferences, set up a parental level, turn screen saver on and off,
adjust what type of television screen you have and more.
Use the following instructions to navigate and change the options as described on
the upcoming pages.
1. While in the Stop mode, press the
SETUP button 1 to enter the Setup
Menu.
2. Select one of the Setup icons at the
top of the screen using the Navigation
(√,®) buttons 2, then press the
PLAY/ENTER button 3 to select it.
3. Use the Navigation (π,†) buttons 2 to
select one of the Setup options, then
press the PLAY/ENTER button 3 to
select it.
4. Use the Navigation (π,†) buttons 2 to
change the desired setting, then press
the PLAY/ENTER button 3 to make the
change.
2
1
5. Exit by pressing the SETUP button 1
again. To return to the previous menu,
simply press the Navigation (√)
button 2.
NOTE:
•
To power on the unit, press the STANDBY button on the remote or press and
hold the Power ON/PLAY/PAUSE (®p) button on the main unit for two seconds.
To power off the unit, press the STANDBY button on the remote or press and
hold the Power Off/Stop (I) button on the main unit for two seconds.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
GENERAL SETUP MENU:
Press the SETUP button to enter the menu, select GENERAL SETUP using the Navigation
(√,®) buttons, then press the PLAY/ENTER button to select it. Select/change the Setup option
as described on page 18.
TV DISPLAY
ANGLE MARK
1
1
General
Audio
Dolby
Video
Preference
General
Audio
Dolby
Video
Preference
- - General Setup Page - -
- - General Setup Page - -
Normal/PS
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Normal/LB
Wide
On
Off
Set TV Display Mode
Set Angle Mark
NORMAL/PS: Pan Scan. Select when the unit is
connected to a conventional TV. Video material
formatted in the Pan Scan style is played back in that
style (the left and right edges are cut off).
Select ON to turn the anglemarks on and
OFF to turn them off.
NORMAL/LB: Letter Box. Select when the unit is
connected to a normal TV. Wide-screen images
are shown on the screen with a black band at the
top or bottom.
WIDE: Select when the unit is connected to a wide-
screen TV.
OSD LANGUAGE
SPDIF OUTPUT
1
1
General
Audio
Dolby
Video
Preference
Audio
Dolby
Video
Preference
General
- - General Setup Page - -
- - General Setup Page - -
TV Display
Angle Mark
OSD Lang
TV Display
Angle Mark
OSD Lang
English
Spanish
French
Spdif Output
Captions
Spdif Output
Captions
Off
Raw
Pcm
Screen Saver
Screen Saver
Set Osd Language
Setup Spdif
Select the desired language (ENGLISH,
SPANISH, FRENCH) for the On-Screen
display to display text. Note that the DVD must
have the language included in order to display
it.
OFF: An analog surround sound format is
output through the rear connectors for two
channel audio out or 5.1 channel audio out.
RAW or PCM: These surround sound
formats are output to a Dolby Digital decoder
through the COAXIAL OUT jack.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
CAPTIONS
SCREEN SAVER
1
1
Audio
Dolby
Video
Preference
General
Audio
Dolby
Video
Preference
General
- - General Setup Page - -
- - General Setup Page - -
TV Display
Angle Mark
OSD Lang
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Spdif Output
Captions
On
Off
Screen Saver
Screen Saver
On
Off
Closed Caption
Screen Saver
When this option is set to ON, Closed
Captions will appear on the screen for the
hearing impaired (if originally recorded on
the DVD). When this option is OFF, the
Closed Captions will not appear.
When this option is set to ON, the screen
saver will come on when the unit stops or
the image is paused for approximately 3.5
minutes.
When this option is OFF, the screen saver will
not come on.
AUDIO SETUP MENU:
Press the SETUP button to enter the menu, select AUDIO SETUP using the Navigation (√,®)
buttons, then press the PLAY/ENTER button to select it. Select/change the setup option as
described on this page using the Navigation (√,®,π,†) buttons and the PLAY/ENTER button.
DOWNMIX
1
Audio
Dolby
Video
Preference
General
- - Speaker Setup Page - -
Downmix
Lt/Rt
Stereo
Set Downmix Mode
LT/RT: Select to hear the sound in theatrical
downmix mode.
STEREO: Select to hear the sound in
Stereo downmix mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
DOLBY SETUP MENU:
Press the SETUP button to enter the menu, select DOLBY SETUP using the Navigation (√,®)
buttons, then press the PLAY/ENTER button to select it. Select/change the Setup option as
described on this page using the Navigation (√,®,π,†) buttons and the PLAY/ENTER button.
DUAL MONO
DYNAMIC
1
1
Audio
Dolby
Video
Preference
General
Audio
Dolby
Video
Preference
General
- - Dolby Digital Setup - -
- - Dolby Digital Setup - -
Dual Mono
Dynamic
Stereo
Dual Mono
Dynamic
FULL
L-Mono
R-Mono
3/4
1/2
1/4
OFF
Mix-Mono
Dual Mono (1 + 1) Setup
STEREO: Select this to set the Dolby Digital
Use to slider to set the Dynamic Range.
Set to OFF to turn Dynamic Range Off.
output to Stereo mode.
L-MONO: Select this to set the Dolby Digital
output to left mono mode, meaning it will
reproduce the left mono signal to the Left
and Right channels.
R-MONO: Select this to set the Dolby
Digital output to right mono mode, meaning
it will reproduce the right mono signal to the
Left and Right channels.
MIX-MONO: Select this to reproduce both
channels mixed together.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
VIDEO SETUP MENU:
Press the SETUP button to enter the menu, select VIDEO SETUP using the Navigation (√,®) buttons,
then press the PLAY/ENTER button to select it. Select/change the setup option as described on this and
the following page using the Navigation (√,®,π,†) buttons and the PLAY/ENTER button.
COMPONENT
SHARPNESS
1
1
Audio
Dolby
Video
Preference
Audio
Dolby
Video
Preference
General
General
- - Video Setup Page - -
- - Video Setup Page - -
Component
Sharpness
Brightness
Contrast
Component
Sharpness
Brightness
Contrast
TV
High
LCD
Medium
Low
Sharpness
Component
Select the Desired Video Output mode:
Adjust for the desired sharpness (HIGH,
MEDIUM, LOW).
TV: Select for S-Video output. (You need to
connect to external TV to observe the picture
using S-Video cable.)
LCD: Select to observe the picture on the
screen display. (You can connect to external TV
to observe the picture using the Video Cable.)
NOTE: When you select TV, the main unit's
display screen will power off automatically and
you can observe the picture on the external TV
using the S-Video cable only. To observe the
pictures on the unit's display screen again,
power off the unit and power on again, the
Component output will reset to LCD.
BRIGHTNESS
CONTRAST
1
1
Audio
Dolby
Video
Preference
General
Audio
Dolby
Video
Preference
General
- - Video Setup Page - -
- - Video Setup Page - -
Component
Sharpness
Brightness
Contrast
Component
Sharpness
Brightness
Contrast
Contrast
Brightness
Adjust to sharpen or soften the picture.
Adjust to increase or decrease the contrast.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
PREFERENCE SETUP MENU:
Press the SETUP button to enter the menu, select PREFERENCE SETUP using the Navigation (√,®)
buttons, then press the PLAY/ENTER button to select it. Select/change the setup option as described on
this and the following page using the Navigation (√,®,π,†) buttons and the PLAY/ENTER button.
AUDIO
SUBTITLE
1
1
Audio
Dolby
Video
Preference
General
Audio
Dolby
Video
Preference
General
- - Preference Page - -
- - Preference Page - -
English
Audio
English
Audio
German
French
Subtitle
Disc Menu
Parental
Password
Default
German
French
Subtitle
Disc Menu
Parental
Password
Default
Spanish
Chinese
Spanish
Chinese
Japanese
Korean
Japanese
Korean
Russian
Russian
Preferred Subtitle Language
Preferred Audio Language
Select the language the DVD will be played
back in (ENGLISH, GERMAN, FRENCH,
Select the language the Subtitle (OSD) will
be in (ENGLISH, GERMAN, FRENCH,
SPANISH,
CHINESE,
JAPANESE,
SPANISH,
CHINESE,
JAPANESE,
KOREAN, RUSSIAN, THAI or OTHERS).
The DVD must be recorded in the selected
language, otherwise the default language of
the DVD will be played.
KOREAN, RUSSIAN, THAI, OFF or
OTHERS). The DVD must be recorded in
the selected language, otherwise the default
language of the DVD will be shown. Select
OFF to select without any language
showing on the TV screen.
DISC MENU
DEFAULT
1
1
Audio
Dolby
Video
Preference
General
Audio
Dolby
Video
Preference
General
- - Preference Page - -
- - Preference Page - -
Audio
English
Audio
Subtitle
Disc Menu
Parental
Password
Default
German
French
Subtitle
Disc Menu
Parental
Password
Default
Spanish
Chinese
Reset
Japanese
Korean
Russian
Load Factory Setting
Preferred Menu Language
Select the language the DISC MENU will be
in (ENGLISH, GERMAN, FRENCH,
Select this option to reset all the preferences
(except PASSWORD) to their original factory
settings. This is useful to reset the NTSC
System.
SPANISH,
CHINESE,
JAPANESE,
KOREAN, RUSSIAN, THAI or OTHERS).
The DVD’s DISC MENU must be made in
the selected language, otherwise the default
language of the DVD will be shown.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
PARENTAL
The Parental option enables parents to prevent their children from watching inappropriate
material on a DVD. It reads the ratings for programming, then denies access to programming
if the program’s rating meets the limitations you select. In this case, the user will have to
enter a password.
1
2
2
General
Audio
Dolby
Video
Preference
- - Preference Page - -
Audio
ENG
ENG
ENG
1
2
3
4
5
6
7
8
KID SAF
Subtitle
Disc Menu
Parental
Password
Default
G
PG
PG 13
PGR
R
NC17
2
ADULT
1
Set Parental Control
Press the SETUP button 1 to enter the
menu, select PREFERENCE SETUP using
the Navigation (√,®) buttons 2, then press
the PLAY/ENTER button 3 to select it. Use
the Navigation (π,†) buttons 2 to select
PARENTAL. Press the PLAY/ENTER button
3 followed by the Navigation (π,†) buttons
Press the PLAY/ENTER button 1 to select
the rating. Input your password using the
Number buttons 2 (see note below), then
press the PLAY/ENTER button 1 again.
The desired rating will then be set, and if
DVDs with this new rating or above are
played, the user will require a password.
If an incorrect password is entered, access
will not be allowed.
2 to select the desired rating (SEE BELOW).
If you forget your password, contact
customer service at the number listed on
the Warranty.
1 (KID SAF): Kid Safe.
6 (R):
Under 17 years old, Parental
Guidance strongly
suggested.
2 (G):
All ages.
3 (PG):
Parental Guidance.
4 (PG13): Parental Guidance less than 13 7 (NC17): 17 years old and above.
years old.
8 (ADULT):Adult only.
5 (PGR): Under 17 years old, Parental
Guidance suggested.
NOTE: The default password is 1234.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
PASSWORD
Select this option to change the password. You must know the old password in order to
change it. If you have forgotten the password, call customer service at the number listed on
page 41.
1
2
General
Audio
Dolby
Video
Preference
- - Preference Page - -
General
Audio
Dolby
Video
Preference
Audio
ENG
ENG
ENG
Subtitle
Disc Menu
Parental
Password
Default
2
Change
Old Password
New Password
Confirm PWD
Change Password
Please Enter Old Password
1
At the PREFERENCE MENU, use the
Navigation (π,†) buttons 1 to select
PASSWORD. Press the PLAY/ENTER
button 2 to select CHANGE.
Press the PLAY/ENTER button 1 to change
the password. Input your old password (see
previous page), then the new password and
then confirm the new password using the
Number buttons 2, then press the
PLAY/ENTER button 1 again. The desired
new password will then be set, be sure to
write it down for future reference.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
IMPORTANT:
When “
” appears while pressing a button, this means that the
corresponding function cannot be performed either on the disc inserted, or
in the selected mode.
MUTE
P/N
1
1
Press the MUTE button once to mute the
sound; “MUTE” will appear on the screen.
Press the MUTE button again to restore the
sound; “MUTE OFF” will appear temporarily
on the screen.
Press the P/N button to switch back and
forth between NTSC and PAL. In the USA,
the standard is NTSC.
LCD MODE Button
HEADPHONE JACK
1
1
Press to cycle between standard 4:3 size
(TV) and full screen (will fill the LCD
screen).
For private listening, plug headphones into
this jack. The speaker will be disconnected
when a plug is inserted into this jack.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION (CONTINUED)
DISPLAY BUTTON
1
2
While playing a DVD, press the DISPLAY
button to cycle as follows:
While playing a CD, press the DISPLAY
button to cycle between single elapsed time
and single remaining time.
1st press:
2nd press:
3rd press:
4th press:
5th press:
Title elapsed time
Title remaining time
Chapter elapsed time
Chapter remaining time
Display off
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OPERATION
IMPORTANT NOTES:
•
After plugging in, the unit will be in the Power Off mode. Press and hold the Power
ON/Play/Pause (®p) button on the main unit for two seconds to turn on the unit; the
Power indicator will light.
•
“
” will appear on the TV screen during operation if you try to access a function that
is not available on the disc.
•
•
Some discs may take a few seconds to load.
If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will
appear in the display.
•
•
Always hold the disc without touching either of its surfaces. When inserting a disc,
position it with the printed title side facing up, align it with the guides and place it in its
proper position.
It is important that you read the manual that accompanies the DVD disc as there are
features that are on this DVD player that cannot be used with certain DVDs. There are
also extra features that are different for each DVD disc, so they are not explained in this
owner’s manual.
•
If the units is in the Stop mode or if there is no disc in the disc tray, the unit will power off
automatically after seven minutes.
PLAYBACK OF A DVD
1
2
Press the STANDBY button on the remote
to turn on the unit; the POWER indicator will
light.
Press the Disc Door OPEN button to open
the disc tray, “OPEN” will appear on the
screen. Insert a disc with the label side
facing up on the disc tray.
NOTE:
You can also press and hold the POWER
ON/PLAY/PAUSE (®p) button on the main
unit for two seconds to turn on the unit.
CONTINUED ON THE NEXT PAGE
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OPERATION (CONTINUED)
3
4
1
1
Close the disc tray. After loading, the menu
screen of the DVD should appear. Use the
Navigation (√,®,π,†) buttons 1 to select
the desired option and press the
PLAY/ENTER button 2 to select it. Adjust the
VOLUME control 3 as desired.
To stop playback, press the Stop (I) button
1; “PRESS PLAY KEY TO CONTINUE” will
appear on the screen. Because the unit will
remember where you stopped, simply press
the PLAY/ENTER button 2 or the RESUME
button 3 to resume playback where you left
off (resuming playback).
If the Stop (I) button 1 is pressed twice,
the screen shows “(I)” and the unit will
stop completely.
NOTE:
If the menu screen does not appear, press
the MENU button to access it.
NOTES:
•
If a MENU appears on the TV screen, press the Navigation (√,®,π,†) buttons to select
the desired option/item, then press the PLAY/ENTER button. Please make sure to refer
to the disc’s jacket or case for additional information.
•
Resuming playback may not work on all discs.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OPERATION (CONTINUED)
SEARCH
SKIP
1
1
3
2
1
2
1
During playback, press either the Search ®®
button 1 or Search√√ button 2 to move the
DVD forward or backward at double (x2) speed to
locate a specific section. Repeatedly press these
buttons and the speed will increase to x4, x8, x16
and resume normal playback.
The DVD will move forward or backward at high
speed until the PLAY/ENTER button 3 is pressed
again; normal playback will resume at that point.
Press the Skip (n) button 1 to advance the
DVD to the beginning of the next chapter.
Press the Skip (o) button 2 to move the
DVD to the beginning of the current or
previous chapters.
SLOW MOTION
Use this feature to move the DVD in slow motion.
PAUSE/STEP
1
1
2
3
1
1
2
During playback, press the SLOW button 1
to move the DVD forward in slow motion
speeds of 1/2, 1/4, 1/8, 1/16 and resume
normal playback. The sound will be muted.
You can also resume normal playback by
pressing the PLAY/ENTER button 2.
Press the PAUSE button 1 once to pause
the picture.
Repeatedly press the STEP button 2 to
play the DVD one frame at a time.
Press the PLAY/ENTER button 3 to resume
normal playback.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OPERATION (CONTINUED)
TITLE/CHAPTER SEARCH
TITLE/TIME SEARCH
Use this feature to directly go to a specific title Use this feature to directly go to a specific title
and/or chapter.
and/or time.
1
1
3
3
1
1
2
2
Press the GOTO button 1 once. Press the
Navigation (√,®) buttons 2 to select
Press the GOTO button 1 twice. Press the
Navigation (√,®) buttons 2 to select TITLE,
TITLE, then use the Number buttons 3 to
select the desired title number. Playback will
start immediately.
then use the Number buttons 3 to select the
desired title number. Playback will start
immediately.
Press the Navigation (√,®) buttons 2 to
select CHAPTER, then use the Number
buttons 3 to select the desired chapter
number. Playback will start immediately.
Press the Navigation (√,®) buttons 2 to
select TIME, then use the Number buttons 3
to select the desired time (Hour/Minutes/
Seconds). Playback will start immediately.
CHAPTER/TIME SEARCH
Use this feature to directly go to a specific chapter and/or time.
Press the GOTO button 1 three times.
1
Press the Navigation (√,®) buttons 2 to
select CHAPTER, then use the Number
buttons 3 to select the desired chapter
number. Playback will start immediately.
3
1
Press the Navigation (√,®) buttons 2 to
select TIME, then use the Number buttons 3
to select the desired time (Hour/Minutes/
Seconds). Playback will start immediately.
2
NOTE:
To enter the TITLE/CHAPTER number, for numbers 10-19, press the +10 button once for the first digit
and then enter the second digit using the Number (0-9) buttons; for 20-29, press the +10 button twice for
the first digit and then enter the second digit using the Number (0-9) buttons, etc.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OPERATION (CONTINUED)
REPEAT PLAYBACK
A-B REPEAT PLAYBACK
While playing back a DVD, this unit can
repeatedly playback a chapter or title.
While playing back a DVD, this unit can
repeatedly play back a specific section.
1
1
While in the Playback mode, press the
While in the Playback mode, press the
Repeat A-B button to define where you want
the section to start. Press the Repeat A-B
button again to define where you would like
the section to end, the unit will then play the
selected area continuously.
REPEAT button once; “
CHAPTER” will
appear on the screen and the currently
playing Chapter will repeat continuously.
Press the REPEAT button a second time;
“
TITLE” will appear on the screen and
Press the Repeat A-B button again to cancel
Repeat A-B mode.
the currently playing Title will repeat
continuously.
Press the REPEAT button a third time; “
ALL” will appear on the screen and all
chapters/titles will play continuously.
Press the REPEAT button once more to
cancel Repeat mode.
NOTE:
• Repeat may not work properly with some discs.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OPERATION (CONTINUED)
SUBTITLE MENU
AUDIO MENU
1
1
Press the AUDIO button repeatedly to
change the audio language. This feature is
not available on all discs.
Press the SUB-T button repeatedly to select
a subtitle language, and to turn the subtitle
menu on/off. This feature is not available on
all discs.
TITLE MENU
DVD MENU
1
1
1
1
3
2
3
2
Press the MENU button 1, and the Main
Menu of the disc will appear. Use the
Navigation (√,®,π,†) buttons 2 to select
the desired option, and then press the
PLAY/ENTER button 3.
Press the TITLE MENU button 1, and the
Title Menu of the disc will appear. Use the
Navigation (√,®,π,†) buttons 2 to select
the desired option, and then press the
PLAY/ENTER button 3.
This is not available on all discs.
This is not available on all discs.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OPERATION (CONTINUED)
ANGLE
Some discs may contain scenes which have
been shot simultaneously from a number of
different camera angles. This feature only
works on discs with more than one camera
ZOOM IN
The image on the screen can be magnified
as follows:
angle. The jacket will be marked with “
”.
1
1
1
2
Press the ANGLE button repeatedly to select
an alternate angle. This feature is not
available on all discs.
Press the ZOOM button 1 once during
Normal, Slow or Still playback modes, and
the unit will zoom x2. Press once or twice
more and the unit will zoom x3/x4. Use the
Navigation (√,®,π,†) buttons 2 to move
the image on the TV screen.
This is not available on all discs.
RESUME
1
1
During playback, press the STOP button 1;
“PRESS PLAY KEY TO CONTINUE” will
appear on the screen, simply press the
PLAY/ENTER button 2 or the RESUME
button 3 to resume playback where you left
off (resuming playback).
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD OPERATION (CONTINUED)
PROGRAMMED PLAYBACK
The DVD player in this unit has a 20 chapter programmable memory that allows you to
program up to 20 chapters on any disc for playback in any desired order. You may program 20
different chapters or you may also program certain chapters to play more than once. To
perform Programmed Playback, proceed as follows:
1
2
Select the first title and chapter to be played back using the
Number buttons to input two numbers for each program
track, one for the title and one for the chapter. After inputting
the two numbers, the cursor will jump to the next program.
NOTE: For numbers 10-19, press the +10 button once for
the first digit and then enter the second digit using the
Number (0-9) buttons; for 20-29, press the +10 button
twice for the first digit and then enter the second digit using
the Number (0-9) buttons, etc.
During playback of a DVD disc, press the
PROGRAM button; the Program menu will
appear on the TV screen.
3
4
1
Repeat step 2 until all desired chapters
have been programmed (up to 20).
Use the Navigation (√,®,π,†) button 1 to
select "Start" at the bottom of the Program
menu; then press the PLAY/ENTER button
2 to begin programmed playback. Playback
will begin on the first chapter that you
programmed and the player will continue to
play all of the chapters that you
programmed in the order in which you
programmed them.
If you would like to program more than 10
chapters, press the SKIP n button to go to
the next screen.
TO CANCEL THE PROGRAM FUNCTION:
Press the STOP (I) button twice.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATION
PLAYBACK OF A CD
1
2
Press the STANDBY button on the remote
to turn on the unit; the POWER indicator will
light.
Press the Disc Door OPEN button to open
the disc tray, “OPEN” will appear on the
screen. Insert a disc with the label side
facing up on the disc tray.
3
Close the disc tray. After loading, playback
will start automatically. To stop playback,
press the Stop (X) button.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATION
RANDOM PLAYBACK
While in the Stop mode, press the
1
SHUFFLE button 1 once, “SHUFFLE” will
appear on the screen; press the
PLAY/ENTER button 2 and the unit will
randomly playback all the tracks on the CD.
To cancel Random, press the SHUFFLE
button 1 until “FOLDER” appears on the
screen.
2
1
SEARCH
SKIP
1
1
3
1
2
1
2
During playback, press either the Search ®®
button 1 or Search√√ button 2 to move the disc
forward or backward at double (x2) speed to
locate a specific section. Repeatedly press these
buttons and the speed will increase to x4, x8, x16
and resume normal playback.
Press the Skip (n) button 1 to advance to
the beginning of the next file.
Press the Skip (o) button 2 to move to the
beginning of the previous file.
The disc will move forward or backward at high
speed until the PLAY/ENTER button 3 is pressed
again; normal playback will resume at that point.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATION
SELECTING TRACKS USING THE
NUMBER BUTTONS
PAUSE
1
1
During playback, press the Number buttons
corresponding to the track number to select your
desired track, and the unit will playback the desired
track automatically.
NOTE: Enter a three-digit number to select a track,
i.e. for the first track, press "0", "0" and then "1" or
for the tenth track, press "0", "1", "0", etc.
Press the PAUSE button to pause playback;
the Pause indicator will appear on the
screen. Press again to resume playback;
the Pause indicator will turn into the Play
indicator again.
REPEAT PLAYBACK
A-B REPEAT PLAYBACK
While playing back a disc, this unit can
While playing back a disc, this unit can
repeatedly playback 1 or all track(s) on a disc. repeatedly play back a specific section.
1
1
While in the Playback mode, press the REPEAT
button once; “REPEAT ONE” will appear briefly
on the TV screen and the currently playing track
will repeat continuously.
Press the REPEAT button a second time;
“REPEAT FOLDER” will appear on the screen
and all of the tracks on the disc will play
continuously.
While in the Playback mode, press the
Repeat A-B button to define where you want
the section to start. Press the Repeat A-B
button again to define where you would like
the section to end, the unit will then play the
selected area continuously.
Press the Repeat A-B button again to cancel
Repeat A-B mode.
Press the REPEAT button once more to cancel
Repeat mode; “FOLDER” will appear on the
screen.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE CD OPERATION
1
2
Press the STANDBY button to turn on the
unit; the POWER indicator will light.
Press the Disc Door OPEN button to open
the disc tray, “OPEN” will appear on the
screen. Insert a disc with the label side
facing up on the disc tray.
3
5
4
3
1
2
After loading a picture CD, the pictures will automatically show as a slideshow on the
screen. Press the Skip (n) 1 or (o) 2 to select the previous or next picture. After the
slideshow is done, it will stop. Press the Stop button 3 to stop the slideshow before it is
finished; then the Picture menu will appear. Press the Navigation (π,†) button 4 to select
the desired picture then press the PLAY/ENTER button 5 to view it.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Check the following before requesting service:
SYMPTOM
POSSIBLE CAUSE
Battery pack is empty.
POSSIBLE SOLUTION
Recharge battery pack.
GENERAL
No power.
Power on, but unit not functioning
properly.
Condensation has formed.
Wrong type of CD inserted.
Unit needs to be reset.
Unplug the unit and wait about one to
two hours to allow the player to dry.
This unit cannot play discs, other than
DVD, standard CDs or picture CDs.
Press the STANDBY ON/OFF button,
then unplug the power cord. Wait one
minute and then plug the unit back in.
The disc is dirty or inserted incorrectly.
Some features and functions are not
available on all discs.
The equipment is not connected properly. Connect the equipment according to the
instructions in this manual.
Clean disc and insert label side-up.
This is normal, try another function.
No picture.
No sound.
The INPUT of the TV is not set to receive Select the appropriate video input
the DVD signal output.
The video cables are not securely
connected.
mode, usually VIDEO or AV.
Connect the video cables securely.
The equipment is not connected properly. Connect the equipment according to the
instructions in this manual.
The equipment connected with the audio
Select the appropriate audio input
cable is not set to receive the DVD signal mode.
input.
The audio cables are not securely
connected.
The connected receiver’s power is off.
Unit needs to be reset to NTSC.
The disc is dirty.
Connect the audio cables securely.
Turn the audio receiver on.
Press P/N button.
Clean the disc.
Playback picture rolls.
The playback picture is poor.
The Search feature is not working.
Some discs have sections that do not
allow searching.
This is normal on some discs.
The picture is not fitting properly.
The remote control is not working.
Wrong menu option is selected in the
SETUP MENU.
The battery is weak or dead.
The battery is not installed properly.
The remote is not aimed at the sensor.
Distance is too far or there is too much
light in the room.
Select the correct TV type (PS, LB, WIDE)
which matches the TV you are using.
Install a fresh battery.
Install battery according to the diagram.
Aim the remote at the sensor.
Operate within 20ft, or reduce the light
in the room.
There is an obstacle in the path of the
beam.
Move obstacle.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE (CONTINUED)
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
DVD
The unit does not start playback.
Rating level set to block the DVD.
Enter your password, and/or change
the rating level.
DVD not inserted, or inserted upside-down. Insert DVD correctly.
A non-playback disc is inserted.
Make sure to insert a DVD; “DVD
VIDEO” will appear in the display.
Place the disc on the disc tray correctly
inside the guide.
The disc is not placed in the guide.
The disc is dirty.
Some features and functions are not
available on all discs.
Clean the disc.
This is normal; try another function.
Some functions do not operate as
stated.
Selected language is not being
shown in the subtitles, or spoken.
If the audio or subtitle language does not This is normal; try another disc.
appear on the disc, then the initial setting
will not be seen/heard.
Subtitles are not working properly.
Subtitles appear only when the discs
contain them.
This is normal; try another disc.
Subtitles not turned on.
Turn the subtitles on.
Try another disc, or wait for a scene
which allows a different camera angle.
Angle cannot be changed.
Angles may not be recorded on the disc
(see disc jacket/case), or they may only
be recorded on certain scenes.
Password forgotten.
The Rating Level password has
been forgotten.
The default password is "1234". If you
changed and forgot it, contact customer
service at the number listed on the
back cover of this manual.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE
VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM OR
CONTACT CUSTOMER SERVICE AT
(954) 660-7100
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN
CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF
PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-
800-321-6993.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
Caring for Discs
•
•
•
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to
come in contact with the shiny, unprinted side of the disc.
Do not attach adhesive tape,
stickers, etc. to the disc label.
Clean the disc periodically with a
soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to
clean the disc. If necessary, use a
CD cleaning kit.
•
•
If a disc skips or gets stuck on a
section of the disc, it is probably dirty or damaged (scratched).
When cleaning the disc, wipe in straight lines from the center of the disc to the
outer edge of the disc. Never wipe in circular motions.
•
•
Discs should be stored in their cases after each use to avoid damage.
Do not expose discs to direct sunlight,
high humidity, high temperatures or
dust, etc. Prolonged exposure or
extreme temperatures can warp the
disc.
Z
•
Do not stick or write anything on either
side of the disc. Sharp writing
instruments, or the ink, may damage
the surface.
Cleaning the Unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Power Requirements ...........................................................DC IN 9V (Center Positive z)
Battery Packs.........................................Li-Polymer Rechargeable Battery DC 7.4V 2600mAh
Power Consumption...........................................................................................................8.5W
Weight ...............................................................................................................................2 Lbs
Dimensions...........................................(Main unit without battery pack) 8.2 x 6.4 x 1.6 inches
Operating Temperature..........................................................................................+5° to +35°C
Operating Humidity Range .........................................................5% to 90% (no condensation)
Accessories..............................................AC Adapter, Rechargeable Battery, Remote Control
..........Remote Battery, Car Adapter, Audio cable, Audio(Coaxial)Video Cable, S-Video Cable
Discs Played:
DVD-VIDEO Disc
12cm single-sided, single layer
12cm single-sided, dual layer
12cm double-sided, single layer
8cm single-sided, single layer
8cm single-sided, dual layer
8cm double-sided, single layer
COMPACT DISC
12cm disc
8cm disc
Video Output Level ...........................................................................................................1Vp-p
Audio Output Level......................................................................................2Vrms (1KHz, 0dB)
Audio Signal Output Characteristics:
Frequency Responses:
DVD (Linear Audio) ......................................................20Hz-20KHz (48KHz/96KHz sampling)
CD Audio................................................................................................................20Hz-20KHz
S/N Ratio............................................................................................................................70dB
Wow and Flutter..................................................................................Below Measurable Level
Pickup:
Wavelength......................................................................................................................655nm
Laser Power...................................................................................................................Class 1
Specifications are subject to change without notice.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
44
Download from Www.Somanuals.com. All Manuals Search And Download.
|