MMP8570A
User’s Guide
Personal FM Stereo
MP3/WMA Player
Before operating this product,
Download from Www.Somanuals.com. All Manuals Search And Download.
please read these instructions completely.
FCC DECLARATION
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) This device may not cause harmful interference, and 2)
This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shield cable must be used with this unit to ensure compliance with class B FCC
limits.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start
of your musical enjoyment. Now it’s time to consider how you can maximize the fun
and excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting
your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association’s Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise. This list of sound levels
is included for your protection.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Decibel
Level
30
Example
Quiet library, soft whispers
40
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
50
60
70
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
We
WantYou
LISTENING
ForALifetime
EIA
EST. 1924
Download from Www.Somanuals.com. All Manuals Search And Download.
4
LOCATION OF CONTROLS
1
2
8
9
3
4
10
11
12
13
5
6
14
7
1. Menu/Lock Button
2. VOLUME +/– Buttons
3. Display
4. PRESS TO OPEN Button
5. PLAY/PAUSE ®p Button
6. Tuning/Skip/Search
m Button
7. Headphone Jack
8. Power/Stop I Button
9. Navigation Control
10. Battery Compartment
(Rear of Unit)
11. Preset –/Navigation Up
L Button
12. Tuning/Skip/Search
l Button
13. Preset +/Navigation Down
M Button
14. USB Port
Download from Www.Somanuals.com. All Manuals Search And Download.
5
BATTERY INSTALLATION
When the bars in the battery indicator (in the display) become low
(see figure 1), replace the battery as follows.
1. Open the rear cover by pressing the PRESS TO OPEN button,
then lift the rear cover up to remove it as shown in figure 2.
2. Insert one (1) “AAA” battery as shown in figure 3. An alkaline
battery is recommended for the longest playing time.
Figure 1
3. Put the rear cover back on until it snaps in place.
Figure 2
Figure 3
NOTE: Each time after you have replaced the battery, when you turn on the unit again, it
will search the music files to update the index. It will take approx. several seconds to update
the index; this updating time depends on the number of music files in the SD/MMC card and
in the internal memory.
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated. Reversed
batteries may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the battery to prevent damage
or injury from possible battery leakage.
4. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
Download from Www.Somanuals.com. All Manuals Search And Download.
6
INSTALL “DIGITAL AUDIO PLAYER” SOFTWARE
TO INSTALL THE "DIGITAL AUDIO PLAYER" CD SOFTWARE
For Windows ME, Windows2000 or Windows XP:
Windows will automatically detect the audio player without installing the CD software
when the USB cable is connected.
For Macintosh OSX:
Macintosh OSX will automatically detect the audio player without installing the CD
software (see page 12 for more details). Do not install the software when using a
Macintosh.
For Windows98SE:
The USB mass storage function will not be activated without driver installation. To
activate the USB mass storage function, please use the installation CD-Rom to install
the driver.
For Windows 98SE, if you are connecting your player to your computer for the first
time, please follow these
instructions:
Procedure to Install Player Driver
1. Insert the Installation CD-Rom
into the CD Drive; the auto-run
program will display the Main
Menu window. Click “Software
Drivers”.
NOTE: If the Main Menu window
does not appear, double click the
“Memorex Startup CD” application
file on the Installation CD to open
the Main Menu window.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
WINDOWS 98 DRIVER INSTALLATION
2. Click “MMP8570” to run the
Windows 98SE driver.
3. Follow the on-screen
instructions to install the
software.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
WINDOWS 98 DRIVER INSTALLATION (CONTINUED)
4. Install the software under
the directory as prompted.
Warning: DO NOT change the
installation path. Otherwise, the
driver may not run properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
WINDOWS 98 DRIVER INSTALLATION (CONTINUED)
5. After successfully installing the driver software, click "Finish" to finish the
installation and exit the Setup menu.
6. When the installation has completed, the new program, “Memorex Chrono Digital
Audio Player”, will be added to the PROGRAM menu on your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
DOWNLOADING AND TRANSFERRING FILES
TRANSFERRING FILES
You can download digital music files from the Internet or use encoding software to convert
music that you have on an audio CD into MP3 or WMA format. Once these files are stored on
your computer you can easily copy them to your player.
Connect the computer to your player using the supplied USB cable.
Press the Power/Stop button to turn the unit on.
A "Removable Disk" window will automatically pop-up on your
computer screen.
To add more files and songs to your player simply drag and drop
MP3 or WMA files from anywhere on your computer into the
"Removable Disk" window.
IMPORTANT NOTE: A WMA file with DRM will not play back if you directly drag and drop it
into the “Removable Disk” window. You must use MMJB or Windows Media Player to transfer
copy-protected files.
When you are finished, see the Safely Remove Hardware procedure on page 13 before
disconnecting the player.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
DOWNLOADING AND TRANSFERRING FILES
TRANSFERRING AUDIO FILES TO YOUR DIGITAL AUDIO
PLAYER USING A MACINTOSH COMPUTER
Make sure to use a Macintosh computer with an operating system of 10.0 or
later to transfer audio files.
1. Turn on your computer.
2. Turn on your digital audio player.
3. Connect the smaller end of the cable to the USB jack on the player and
the larger end of the cable to your USB port on your Macintosh.
4. Your computer will automatically recognize your player and mount a hard
disk icon onto your desktop.
5. Locate the folder where your audio files are stored on your computer’s
hard drive. Simply drag and drop the audio files onto the mounted hard
disk drive icon of your digital audio player located on your desktop.
6. After you have finished your transfer, put away the digital audio player
hard disk icon(s) by dragging it to the Trash icon or Control-click its icon
and choose Eject from the file menu or select Eject from the File drop
down menu located at the top of your screen. You can also use the
keyboard shortcuts by selecting the digital audio player hard disk icon
and pressing the Command-E keys.
7. Your player is ready to play the files you transferred.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
SAFELY REMOVE HARDWARE (PC)
SAFELY REMOVING YOUR PLAYER FROM THE COMPUTER
NOTE: To avoid damage to your player or data loss, always follow the procedure listed
below before disconnecting the USB cable from your computer or disconnecting the
player from the USB cable.
Using your mouse, double-click the "Safely Remove
Hardware" icon on the task bar.
From the "Safely Remove Hardware" window, select
"USB Mass Storage Device" and click the "Stop"
button. The "Stop a Hardware Device" window will pop-up as shown:
Click "OK". When the "Safe to Remove Hardware" window is displayed, you may
remove the player from the USB cable or remove the USB cable from the computer.
NOTES:
• If the “Safely Remove Hardware” icon is not displayed on the task bar, please double
-click on My Computer. Right-click on “Removable Disk” and left-click on “Eject”.
Then it is safe to remove the player from the computer.
• The “Safely Remove Hardware” procedure is not necessary for Win98 and
Win98SE users.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
INSTALLING MUSICMATCH JUKEBOX
NOTE: WMA DRM protected files will not play if you use the “drag and drop” procedure.
You must follow the procedure below to play WMA DRM files on your MMP8570.
1. Install the MMJB Software as described above.
2. Turn the unit ON, then connect the USB cable to the unit and the USB port of the
computer. “USB Connect” will be displayed on the LCD when it is properly
connected.
5. The tracks are now properly transferred to the player. Follow the “Safely
Removing Hardware” section on the previous page. Unplug the unit from the
computer and insert the headphones and listen to your music.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
INSTALLING MUSICMATCH JUKEBOX (CONTINUED)
Download from Www.Somanuals.com. All Manuals Search And Download.
15
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
EXTERNAL MEMORY CARD
TO AVOID DAMAGE, make sure the unit is off before
inserting or removing the card.
1. Remove the rear cover by pressing the PRESS TO
OPEN button, then lift the rear cover up to remove it, as
shown in Figure 1.
Figure 1
2. Insert a SD/MMC memory card (not included) up to
512MB, facing up, as shown in Figure 2.
3. Connect the USB cable as described previously.
4. Drag MP3 and WMA files into the SD/MMC memory
card's "Removable Disk" window.
NOTE: A WMA file with DRM will not playback if you directly
drag and drop it into the “Removable Disk” window. See
page 14 for downloading WMA files with DRM from the
computer to your player.
Figure 2
5. To remove the SD/MMC memory card, turn the unit off,
then push the edge of the card as shown in Figure 3, and
the card will spring out. Carefully remove the card.
6. Replace the rear cover until it snaps in place.
NOTE:
•
If the external card is inserted, removed or replaced, the
unit will search the music files to update the index when
the unit is turned on again.
•
If the external card is inserted, the memory card
indicator will appear at the top side of the display while
in the Music Player mode.
Figure 3
Download from Www.Somanuals.com. All Manuals Search And Download.
16
OPERATION
TURNING THE POWER ON/OFF
LOCK SWITCH
1
1
While in the Music Player menu or the FM Tuner menu,
press and hold the Menu/Lock button; "Holding" will
appear in the display. When “Locked” appears in the
display, release the button. Then a small Lock icon will
appear at the bottom right side of the display which
indicates that the Lock function is activated (no buttons will
be able to be pressed). This is useful when you do not
want the station/track changed by accidentally pressing a
button. To cancel the Lock function, press and hold the
Menu/Lock button, "Locked" will appear in the display.
When "Unlocked" appears in the display, release the
button. Then the small Lock icon will disappear from the
display which indicates that the Lock function is cancelled.
Turn the unit on by pressing the Power/Stop
button; the Memorex start screen will appear
in the display temporarily. Then the Music
Player menu will appear and the MP3/WMA
track's information will appear in the display.
To turn the unit off, press and hold the
Power/Stop button; “Continue Holding To
Power Off” will appear in the display. Do not
release the Power/Stop button until the unit
turns off.
EQ–MUSIC PLAYER ONLY
While in the Music Player menu, press the Menu/Lock button 1; the Main
menu will appear. Rotate the Navigation control 2 to select Settings, then
press the Navigation control 2; the Settings menu will appear. Rotate the
Navigation control 2 to select Equalizer, then press the Navigation control
2; the Equalizer menu will appear. Rotate the Navigation control 2 to
select the desired EQ setting: Normal, XBass, Rock, Classical, Jazz or
Pop. Press the Navigation control 2 to select and exit the Equalizer menu.
Press the Menu/Lock button 1 twice to exit the menus. The selected EQ
setting will appear at the top of the display when in Music Player mode.
1
1
2
NOTE: To navigate up/down through the menu, you can use the Preset –/Navigation Up
L or Preset +/Navigation Down M button in place of rotating the Navigation control.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
OPERATION (CONTINUED)
TO LISTEN TO THE FM RADIO
1
2
1
2
Press the Menu/Lock button 1; the Main menu will
appear. Rotate the Navigation control 2 to select FM,
then press the Navigation control 2; the FM Tuner will
appear.
NOTE: When you select the Radio mode for the first
time, the unit will automatically scan and set the available
stations into Presets 1 through 20. Then Preset 1 will
appear with the corresponding frequency tuned in.
Turn the unit on by pressing the Power/Stop
button; the Memorex start screen will appear
in the display temporarily. Then the Music
Player menu will appear and the MP3/WMA
track's information will appear in the display.
1
3
3
4
1
2
Select a station by rotating the Navigation AUTOMATIC TUNING: You can also press
control. When a station is broadcasting in
stereo, “STEREO” will appear in the
display, otherwise “MONO” will appear in
the display.
and hold the Tuning/Skip/Search √/m 1 or
®/l 2 button and the unit will automatically
search for the next strong station. Press the
VOLUME +/- buttons 3 to increase or
decrease the volume.
ANTENNA
FM–The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
OPERATION (CONTINUED)
TO ADD PRESETS
2
1
2
1
1
2
While in FM Playback mode, and with a desired Select a desired Preset by rotating the Navigation
control 1, then press the Navigation control 1.
Select Yes (confirm adding the station to the
Preset) or No (cancel adding the station to the
Preset) by rotating the Navigation control 1, then
press the Navigation control 1. To exit the FM
menu, press the Menu/Lock button 2.
station selected, press the Menu/Lock button 1;
the FM Menu will appear. Rotate the Navigation
control 2 to select Add Preset, then press the
Navigation control 2.
TO LOAD PRESETS
1
1
2
1
2
While in FM Playback mode, press the Select a desired Preset by rotating the Navigation
control, then press the Navigation control.
NOTE: You can also load a Preset while in FM
Playback mode by pressing the Preset/
Navigation Up L or Down M button.
Menu/Lock button 1; the FM Menu will appear.
Rotate the Navigation control 2 to select Load
Preset, then press the Navigation control 2.
AUTO SCAN:
While in FM Playback mode, press the Menu/Lock button; the FM menu will appear. Rotate the
Navigation control to select Auto Scan then press the Navigation control. The unit will automatically scan
and set the available stations into Presets 1 through 20. Then Preset 1 will appear with the
corresponding frequency tuned in.
NOTE: During Auto Scan, "
" will appear in the display.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
TO DELETE A PRESET
2
1
2
1
1
2
Select a desired Preset to delete by rotating the
Navigation control 1, then press the Navigation
control 1. Select Yes (to delete the selected preset)
or No (to cancel deleting the selected preset) by
rotating the Navigation control 1, then press the
Navigation control 1. To exit the menus, press the
Menu/Lock button 2 twice.
While in FM Playback mode, press the
Menu/Lock button 1; the FM Menu will appear.
Rotate the Navigation control 2 to select Delete
One, then press the Navigation control 2.
TO DELETE ALL PRESETS
2
1
2
1
1
2
While in FM Playback mode, press the Press the Navigation control 1. Select Yes (to delete
all the preset stations) or No (to cancel deleting all the
preset stations) by rotating the Navigation control 1,
then press the Navigation control 1. To exit the
menu, press the Menu/Lock button 2.
Menu/Lock button 1; the FM Menu will appear.
Rotate the Navigation control 2 to select Delete
All, then press the Navigation control 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
OPERATION (CONTINUED)
TO LISTEN TO MP3s/WMAs
1
1
2
1
2
3
Turn the unit on by pressing the Power/Stop button If the unit is in FM mode, press the Menu/Lock button ;
; the Memorex start screen will appear in the
display temporarily. Then the MP3/WMA track's
information will scroll across the display and the
song number and timer will appear at the bottom of
the display, press the PLAY/PAUSE ®p button 2 to
start playback.
the FM menu will appear in the display. Rotate the
Navigation control 2 to select “Exit FM”, then press the
Navigation control 2 to select and enter the Music
Player menu and the MP3/WMA track’s information will
appear in the display. Press the PLAY/PAUSE ®p
button 3 to start playback.
3
4
Set the Equalizer as shown on page 17. Press the
VOLUME +/- buttons to increase or decrease the
volume.
Press the Power/Stop button to stop playback. To
turn the unit off, press and hold the Power/Stop
button; “Continue Holding To Power Off” will appear
in the display. Do not release the Power/Stop button
until the unit turns off.
NOTE:
• See pages 7 through 16 for information on
uploading MP3 and WMA files to this unit.
RESUME:
If you turn the unit off while playing a music file, when you turn on the unit again, the last file played will appear
in the display. Press the PLAY/PAUSE ®p button to resume playback of the music file.
NOTE: There will be no Resume after replacing the battery; inserting, removing or changing the SD/MMC
card;or adding/deleting music files in the internal/external memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
OPERATION (CONTINUED)
TO PAUSE PLAYBACK
2
1
During playback, if you wish to pause the file
momentarily, press the PLAY/PAUSE ®p button;
playback will pause, the Pause indicator will
appear and the timer will stop counting.
Press the PLAY/PAUSE ®p button again to resume
playback; the sound will return, the Play indicator
will appear and the timer will start counting again.
NOTE: If you are not in the Music Player menu, the
Pause function will not be available.
TO SELECT/BROWSE THROUGH THE FILES
1
2
1
1
Rotate the Navigation control to select the desired
songs to browse (All Songs, Albums, Artists, Genres,
Songs), then press the Navigation control. (See below
for how to navigate within the category.)
Press the Menu/Lock button 1; the Main menu will
appear. Rotate the Navigation control 2 to select
Browse, then press the Navigation control 2; the
Browse Menu will appear.
All Songs–the unit will start playback automatically; all the music files in the player and in the SD/MMC card will be played.
Albums/Genres–the Albums/Genres will be shown in the display. Select the desired Album/Genre by rotating the Navigation
control and pressing the Navigation control to confirm. To playback all music files of the Album/Genre, rotate the Navigation
control to select All Songs and press the Navigation control to start playback. OR rotate the Navigation control to select the
desired music file inside the Album/Genres; press the Navigation control to playback the music file selected.
Artists–the Artists will be shown in the display. Select the desired Artist by rotating the Navigation control and press the
Navigation control to confirm the selection. Rotate the Navigation control to select All Songs and press the Navigation control
to start playback all the music files of the selected artist. OR select the desired Album by rotating the Navigation control and
press the Navigation control to confirm. To playback all music files in the album, rotate the Navigation control to select All Songs
and press the Navigation control to start playback of the music files in the selected album. OR rotate the Navigation control to
select the desired music file inside the album. Press the Navigation control to playback the music file selected.
Songs–the Songs/music files will be shown in the display, select the desired music file by rotating the Navigation control; then
press the Navigation control to playback the music file selected.
NOTE: To return to the previous menu, press the Menu/Lock button once.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
OPERATION (CONTINUED)
FORWARD/REVERSE SKIP
1
2
During playback, press the Navigation/ During playback, press the Navigation/Skip/
Skip/Search ®/l button to advance the Search √/m button to move the player back
player to the beginning of the next file. to the beginning of the currently-playing file.
Press the Navigation/Skip/Search ®/l Press the Navigation/Skip/Search √/m
button repeatedly to advance the player to button repeatedly to move the player back to
lower-numbered files.
higher-numbered files.
HIGH-SPEED MUSIC SEARCH
During playback, press and hold the
Navigation/Skip/Search √/m 1 or ®/l 2
button to move the player forward or
backward within a file to locate a specific
musical passage. The player will move
forward or backward at high speed as long
as the button is held. When you release the
button, normal playback will resume.
1
1
2
NOTE: If you are not in the Music Player menu, the Forward/Reverse Skip and High-
Speed Music Search functions will not be available.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
OPERATION (CONTINUED)
TO SELECT A PLAY MODE
1
1
2
1
2
Rotate the Navigation control to select Play Mode,
then press the Navigation control; the Play Mode
menu will appear.
Press the Menu/Lock button 1. Rotate the
Navigation control 2 to select Settings, then
press the Navigation control 2; the Settings
menu will appear.
1
4
3
Rotate the Navigation control to select a desired Play
mode (Normal, Repeat One, Repeat All, Random or
Random All), then press the Navigation control.
Normal–normal playback mode
Press the Menu/Lock button twice to exit the
menus; the selected mode will be activated.
Repeat One–repeatedly playback a music file
Repeat All–repeatedly playback all the selected music
files
Random–randomly playback all the selected music
files once
Random All–randomly playback all the selected music
files repeatedly
NOTE: see page 22 for Selecting/Browsing the files.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
OPERATION (CONTINUED)
TO SET THE CONTRAST
1
1
2
2
2
1
Press the Menu/Lock button 1. Rotate the
Navigation control 2 to select Settings, then
press the Navigation control 2; the Settings
menu will appear. Rotate the Navigation control
2 to select Contrast, then press the Navigation
control 2; the Contrast setting will appear.
Rotate the Navigation control 1 to set the
contrast, then press the Navigation control 1;
the Settings menu will appear. Press the
Menu/Lock button 2 twice to exit the menus.
TO SET THE BACKLIGHT
1
1
2
2
2
1
Rotate the Navigation control 1 to select Off, 3
seconds, 5 seconds, 10 seconds or Always On. This
is the time the backlight will be lit before turning off
when no buttons are pressed. Select Off and the
backlight will not light. Press the Navigation control
1 to set; the Settings menu will appear. Press the
Menu/Lock button 2 twice to exit the menus.
Press the Menu/Lock button 1. Rotate the
Navigation control 2 to select Settings, then
press the Navigation control 2; the Settings
menu will appear. Rotate the Navigation control
2 to select Backlight, then press the Navigation
control 2; the Backlight menu will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
OPERATION (CONTINUED)
TO SET THE POWER SAVINGS
1
1
2
2
2
1
Press the Menu/Lock button 1. Rotate the Rotate the Navigation control 1 to select Off, 1
Navigation control 2 to select Settings, then press minute, 2 minutes, 5 minutes or 15 minutes. This
the Navigation control 2; the Settings menu will
appear. Rotate the Navigation control 2 to select
Power Saving, then press the Navigation control
2; the Power Saving menu will appear.
is the time the unit will stay on if it is in the Stop
mode and no buttons have been pressed for the
set time. Press the Navigation control 1 to set;
the Settings menu will appear. Press the
Menu/Lock button 2 twice to exit the menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
OPERATION (CONTINUED)
TO SET THE LANGUAGE
1
1
2
2
2
1
Press the Menu/Lock button 1. Rotate the
Navigation control 2 to select Settings, then
press the Navigation control 2; the Settings
menu will appear. Rotate the Navigation control
2 to select Language, then press the Navigation
control 2; the Language menu will appear.
Rotate the Navigation control 1 to select
English, Traditional Chinese, Spanish,
French, Dutch or Italian. Press the Navigation
control 1 to set; the Settings menu will
appear. Press the Menu/Lock button 2 twice
to exit the menus.
TO VIEW THE SYSTEM INFO
1
1
1
2
2
Press the Menu/Lock button 1. Rotate the Rotate the Navigation control 1 to select
Navigation control 2 to select Settings, About, then press the Navigation control 1;
the System Information will appear. Press or
rotate the Navigation control 1 to view
additional System Info. Press the Menu/Lock
button 2 three times to exit the menus.
then press the Navigation control 2; the
Settings menu will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before calling for service.
SYMPTOM
CAUSE
SOLUTION
Unit will not
turn on.
Dead battery, or not
installed properly.
Replace battery and install
properly.
No sound.
Headphones are not
inserted.
Insert headphones.
Volume is set too low. Raise the volume.
DRM files copied & pasted. See page 14.
The MP3 or WMA files Download uncorrupted
are corrupted.
files.
FM distorted.
Station not tuned.
Retune station and extend
headphone wire.
Download Failure.
The computer is not
recognizing the
player.
Damaged USB cable. Replace cable.
The USB cable is
Make sure USB cable is
not securely connected. securely connected.
Win98 driver is not
installed or computer is see pages 7 through 10 for
not compatible. compatibility.
Install Win98 driver and/or
Download from Www.Somanuals.com. All Manuals Search And Download.
28
TROUBLESHOOTING GUIDE (CONTINUED)
SYMPTOM
No buttons work.
CAUSE
The Lock feature is
activated.
SOLUTION
Deactivate Lock feature as
described on page 17.
Unit needs to be reset Reset unit and/or
or firmware needs to be update firmware, see
updated.
page 31.
Unit acting erratically. Unit needs to be reset Reset unit and/or
or firmware needs to be update firmware, see
updated.
Incorrect downloading See page 14 to download
methods. WMA files with DRM.
page 31.
WMA files with DRM
cannot playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
FORMATTING THE PLAYER
WARNING! Do not format this player unless it stops working and you are
instructed to do so by technical support personnel.
Formatting the Player
1. Use the USB cable to connect the player and
495 MB
the computer.
2. Double click on My Computer, right-click the
"Removable Disk" and left-click on "Format".
3. At the "Format" window, select "FAT32" from
the file system pull-down menu, then click start
to format the unit (see figure to the right).
NOTE: Make sure you have selected "FAT32" at
the file system pull-down menu, otherwise after
formatting, the player will not work properly.
4. Click OK to confirm and the player will start to
format.
5. When finished, click "Close" to close the Format window.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
UPDATING THE FIRMWARE
WARNING! Do not update the firmware unless you are experiencing problems with
your digital audio device. Incorrect or faulty firmware installation will cause the player
to stop functioning.
2. Unzip the file, then double-click setup.exe in the Desktop folder to install the
software to your computer.
3. Connect the player to the computer using the supplied USB cable and the
installation screen will appear. (If the installation screen does not appear, unplug
the USB cable and turn off the unit. Connect to the computer again and press and
hold the Power/Stop button until the installation screen appears.)
4. Follow the on-screen instructions to install the driver.
5. When finished, click START and locate the newly-installed software “Memorex
Chrono Digital Audio Player” and select “Firmware Download”.
RESETTING THE UNIT
If the player is not operating properly, try resetting it by removing the battery for a few
seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
SPECIFICATIONS
Audio
Frequency Range
Headphones Output
S/N Ratio
20Hz–20KHz
10mW, 16ohm (Max. Vol)
90dB (MP3)
File Support
MP3
MPEG 1/2/2.5 Layer 3
WMA
Windows Media Audio (WMA file with DRM)
8kbps–320kbps
Bit Rate
Tag Info
ID3 Tag (Unicode OS)
FM Tuner
General
FM Frequency Range
Antenna
87.5MHz–108MHz
Headphones/Earphones Cord
Antenna
Dimension
Weight
75 x 68 x 25 mm
50g (without battery)
Battery
1 x AAA battery
LCD
Full Graphic with Backlight
6 Languages (English, Traditional
Chinese, French, Spanish, Dutch,
Italian)
Language
USB
USB 2.0
512MB
Built-in Memory
Max. Playtime
Supported OS
Approx. 18 hours (128kbps, MP3 files)
Win ME, 2000, XP and Mac OSX
Win 98SE (Driver is required)
23° F to 104° F (-5° C to 40° C)
Operating Temperature
Specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
FOR FIRMWARE UPGRADE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
TO CHECK IF THERE IS NEW FIRMWARE AVAILABLE.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,
PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR TO MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL
AT 1-800-321-6993.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Memcorp, Inc.
Weston, FL
Printed in China
MMP8570-A
Download from Www.Somanuals.com. All Manuals Search And Download.
|