MMP3774
User’s Guide
512MB MP3/WMA
Digital Audio Player
Before operating this product,
Download from Www.Somanuals.com. All Manuals Search And Download.
please read these instructions completely.
FCC DECLARATION
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) This device may not cause interference, and 2) This
device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shield cable must be used with this unit to ensure
compliance with class B FCC limits.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start
of your musical enjoyment. Now it’s time to consider how you can maximize the fun
and excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting
your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association’s Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise. This list of sound levels
is included for your protection.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Decibel
Level
30
Example
Quiet library, soft whispers
40
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
50
60
70
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
We
WantYou
LISTENING
ForALifetime
EIA
EST. 1924
Download from Www.Somanuals.com. All Manuals Search And Download.
4
LOCATION OF CONTROLS
1. Volume - Button
8. Navigation Control*: (clockwise)
Navigation π
2. MENU/Lock Button
3. Headphone Jack
(Side of Unit)
Navigation ®/Skip/Search n
Navigation †
4. Battery Compartment
(Rear of Unit)
5. Display
6. Volume + Button
7. Power On/Off/Stop Button
Navigation √/Skip/Search o
9. SD/MMC Memory Card Slot
(Side of Unit)
10. USB Jack (Bottom of Unit)
*Pressing the center area of the
Navigation control acts as an
Enter/Select/Play/Pause ®p button.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
BATTERY INSTALLATION
When the bars in the battery indicator (in the display) become low (see Figure 1),
replace the battery as follows.
1. Disconnect the headphone plug from
FULL
50%
Figure 1
EMPTY
the Headphone jack on the side of the
unit. Then, remove the Battery
Compartment cover on the rear of the
unit by sliding it out.
2. Insert one (1) “AAA” battery, following the
polarity indicated in the Battery Compartment,
as shown in Figure 2. An alkaline battery is
recommended for the longest playing time.
3. Slide the Battery Compartment cover back
onto the rear of the unit.
Figure 2
NOTE: Each time after you have replaced the battery, when you turn on the unit again, it
will search the music files to update the index. It will take approx. several seconds to update
the index; this updating time depends on the number of music files in the SD/MMC card and
in the internal memory.
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated. Reversed
batteries may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the battery to prevent damage
or injury from possible battery leakage.
4. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
Download from Www.Somanuals.com. All Manuals Search And Download.
6
INSTALL “DIGITAL AUDIO PLAYER” SOFTWARE
TO INSTALL THE "DIGITAL AUDIO PLAYER" CD SOFTWARE
For Windows ME, Windows2000 or Windows XP:
Windows will automatically detect the audio player without installing the CD software
when the USB cable is connected.
For Macintosh OSX:
Macintosh OSX will automatically detect the audio player without installing the CD
software. Do not install the software when using a Macintosh.
For Windows98SE:
The USB mass storage function will not be activated without driver installation. To
activate the USB mass storage function, please use the installation CD-Rom to install
the driver.
For Windows 98SE, if you are connecting your player to your computer for the first
time, please follow these instructions:
Procedure to Install Player Driver
1. Insert the Installation CD-Rom
into the CD Drive, then the
installation screen will appear. If
the installation screen doesn't
automatically appear, double-
click my computer then double-
click on the CD drive, then the
installation screen will appear.
Click on the Windows 98
firmware icon. Then click on the
MMP3774 icon.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
WINDOWS 98 DRIVER INSTALLATION
2. At the Welcome screen, click NEXT.
3. Read the License Agreement. If you accept
the terms of the license agreement, select
and dot the circle at the left of "I accept the
terms of the license agreement". Then click
NEXT.
4. At the Setup screen, click NEXT. It is
recommended to leave the destination folder
as it is.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
WINDOWS 98 DRIVER INSTALLATION (CONTINUED)
5. At the Program Folder screen, click NEXT. It
is recommended to leave the program folder
as it is.
6. Click "Install" to start the installation.
7. When finished, the InstallShield Wizard
Complete screen will appear. Click FINISH to
exit the Install program and complete the
Windows 98 Driver installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
WINDOWS MEDIA PLAYER 10 INSTALLATION
Windows Media Player 10 is for use with
Windows XP only. For Windows ME and
Windows 2000, please install Windows Media
Player 9. For Windows 98SE, please visit
www.Microsoft.com to download the
corresponding Windows Media Player for your
computer.
Once you have installed Windows Media Player
10, you can transfer MP3 files, WMA files, WMA
files with DRM 9 or DRM 10 to your player using
the “Sync” function.
1. Insert the Installation CD-Rom into the CD
Drive, then the installation screen will appear.
If the installation screen doesn’t automatically
appear, double-click “My Computer” then
double-click on the CD drive, then the
installation screen will appear. Click on the
Windows Media Player 10 Setup icon.
2. Installation will begin.
3. Read the License Agreement, then click I
ACCEPT.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
WINDOWS MEDIA PLAYER 10 INSTALLATION (CONT.)
4. Installation will continue.
5. At the Welcome screen, click NEXT.
6. Select the desired privacy options.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
WINDOWS MEDIA PLAYER 10 INSTALLATION (CONT.)
7. Click on Privacy Statement to view the
Statement, if desired. When finished, click
Next.
8. Read the instructions and tick the check
boxes as desired. Then click on More
Options and tick the check boxes as desired.
9. Click “Finish” to finish the installation of the
Windows Media Player 10.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
DOWNLOADING AND TRANSFERRING FILES
TRANSFERRING FILES
You can download digital music files from the Internet or use encoding software to
convert music that you have on an audio CD into MP3 or WMA format. Once these
files are stored on your computer you can easily copy them
to your player.
For Windows XP, if you already installed Windows Media
Player 10, you can transfer music files (MP3, WMA, WMA
files with DRM 9 or DRM 10) to the player through the
"Sync" function of Windows Media Player 10. Connect your
computer to the USB port on your
computer using the USB cable.
“MMP3774” or “MTP Player” will
appear in your "My Computer"
folder which indicates the player is
connected. Also, the player will
display the above figure. Then,
follow the procedure on page 16 to transfer music files to the player.
For Windows ME, Windows 2000, Windows 98 or Windows XP (without
Windows Media Player 10), transfer music files as follows:
1. Connect your player to the USB port on your computer using the USB cable as
shown above.
2. A "Removable Disk" window will automatically pop-up on your computer
screen.
3. To add more files and songs to your player, simply drag and drop MP3 or WMA
files from anywhere on your computer into the "Removable Disk" window.
IMPORTANT: A WMA file with DRM 9 or DRM 10 will not play back if you directly
drag and drop it into the "Removable Disk" window. You must use Windows Media
Player 10 to transfer copy-protected files as described on page 16.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
DOWNLOADING AND TRANSFERRING FILES (CONT.)
TRANSFERRING AUDIO FILES TO YOUR DIGITAL AUDIO PLAYER USING A
MACINTOSH COMPUTER
Make sure to use a Macintosh computer with an operating system of 10.0 or layer to
transfer audio files.
1. Turn on your computer.
2. Turn on your digital audio player.
3. Connect the smaller end of the cable to the USB jack on the player and the larger
end of the cable to the USB port on your Macintosh.
4. Your computer will automatically recognize your player and mount a hard disk icon
onto your desktop.
5. Locate the folder where your audio files are stored on your computer’s hard drive.
Simply drag and drop the audio files onto the mounted hard disk drive icon of your
digital audio player located on your desktop.
6. After you have finished your transfer, put away the digital audio player hard disk
icon(s) by dragging it to the Trash icon or Control-click its icon and choose Eject from
the File menu or select Eject from the File drop-down menu located at the top of your
screen. You can also use the keyboard shortcuts by selecting the digital audio player
hard disk icon and pressing the Command-E keys.
7. Your player is ready to play the files you transferred.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
DOWNLOADING AND TRANSFERRING FILES (CONT.)
For Windows XP, you can also utilize the previously
installed Windows Media Player 10 software to convert
music on an audio CD into MP3 or WMA format as
follows:
1. Open the Windows Media Player 10 Browser,
then click on the “Rip” icon on the top tool bar.
Insert a Music CD into the CD-Rom drive of your
computer.
NOTE: For Windows 98SE, Windows ME and
Windows 2000, please use the Windows Media Player
9 to convert music on an audio CD into MP3 or WMA
format.
2. Click on the “Tools” menu option at the top menu bar, then
click on “Options”; the Option setting menu will appear.
Click on Rip Music and set the Rip Music to the desired
location on your computer. Then, set the desired format for
the newly ripped music (MP3 format or Windows Media
Audio format). Adjust the audio quality as desired. When
finished, click “OK” to confirm the settings.
3. Click on the “Rip Music” icon to start ripping the music to
your computer.
4. When the music tracks are ripped; connect the player to
your computer. Open the “Removable Disk”, “MTP Player”
or “MMP3774” window and open the ripped music location window.
5. To add the transferred/ripped music files/songs to your player simply drag and drop the MP3
and/or WMA files into the “Removable Disk”, “MTP Player” or “MMP3774” window.
6. When the files are finished loading into the player, follow the “Safely Remove
Hardware” procedure as shown on page 17.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
DOWNLOADING AND TRANSFERRING FILES (CONT.)
TRANSFERRING MP3/WMA FILES AND WMA FILES WITH
DRM 9 OR DRM 10 USING THE WINDOWS MEDIA PLAYER
10 (FOR WINDOWS XP ONLY)
To transfer MP3 files/WMA files/WMA files with DRM 9 or 10 to
the player, follow the procedure described below using the
previously installed Windows Media Player 10. Before
beginning the procedure please turn the unit on and connect
the unit to the computer as previously described. Make sure
there is NO SD/MMC card inserted into the player.
1. Open the “Windows Media Player Browser 10” and click
on “Sync”.
2. Click on the “Sync List” pull-down menu to locate the
music files you wish to download. Then make sure to tick
the box next to the files.
3. Select the Portable Device (“MMP3774” or “MTP Player”)
that you want to copy to from the right side drop-down
menu. Click “Start Sync” to start transferring music files to
the player.
4. After finished transferring all the desired files to your unit,
follow the “Safely Remove Hardware” procedure on the
next page.
NOTES:
•
For WMA files with DRM 10, you can only use Windows
Media Player 10 to transfer files to your player.
For WMA files with DRM 10, the files will not be played if
you transfer the files into the SD/MMC card’s memory. You
must transfer the WMA files with DRM 10 to the player’s
internal memory for playback.
•
•
•
For Windows ME and Windows 2000, please use
Windows Media Player 9 to transfer WMA files with DRM
9 to the player. For Windows 98SE, please visit
www.Microsoft.com to download the corresponding
Windows Media Player to transfer music files to the player.
Make sure the SD/MMC card is not inserted into the unit.
Also, make sure you have selected “MTP Player” or
“MMP3774” in Step 3. Otherwise, the WMA files with
DRM10 will not be able to be played. Also, if the WMA files
with DRM 10 are transferred to the SD/MMC card, the files
will not be able to be played.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
SAFELY REMOVE HARDWARE
SAFELY REMOVING YOUR PLAYER FROM THE COMPUTER
NOTE: To avoid damage to your player or data loss, always follow the procedure listed below
before disconnecting your player from the USB port on your computer.
Using your mouse, double click the "Safely Remove
Hardware" icon on the task bar.
From the "Safely Remove Hardware" window, select "USB
Mass Storage Device" and click the "Stop" button. The
"Stop a Hardware Device" window will pop-up as shown:
Click "OK". When the "Safe to Remove Hardware" window is displayed, you may remove the
player from the USB cable or remove the USB cable from the computer.
NOTES:
• If the “Safely Remove Hardware” icon is not displayed on the task bar, please double click
on My Computer. Right click on “Removable Disk” and left click on “Eject”. Then it is safe to
remove the player from the computer.
• The “Safely Remove Hardware” procedure is not necessary for Win98 and Win98SE users.
• If you are using Windows XP and the Windows Media Player 10 software is already installed,
and if “MMP3774” or “MTP Player” appears on My Computer instead of “Removable Disk”,
then you do not need to follow the above “Safely Remove Hardware” procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
EXTERNAL MEMORY CARD
TO AVOID DAMAGE, make sure the unit is off before
inserting or removing the card.
1. Insert a SD/MMC memory card (not included) up to
1GB, label side facing the rear of the player, as
shown in Figure 1. Make sure that the card clicks
into place.
2. Connect the USB cable as described previously.
3. Drag MP3 and WMA files into the SD/MMC memory
Figure 1
card's "Removable Disk" window.
NOTE: A WMA file with DRM 9 will not playback if you
directly drag and drop it into the “Removable Disk”
window. See page 16 for transferring WMA files with
DRM 9 from the computer to your player. Also, if the
SD/MMC card is inserted, WMA files with DRM 10 will
not playback. Make sure there is no SD/MMC card
inserted and see page 16 for transferring WMA files
with DRM 10 from the computer to your player.
4. To remove the SD/MMC memory card, turn the unit
off, then push the edge of the card and the card will
spring out. Carefully remove the card, as shown in
Figure 2.
Figure 2
NOTE:
•
•
If the external card is inserted, removed or replaced, the unit will search the music
files to update the index when the unit is turned on again.
While the player is on, if the SD/MMC card is removed or inserted, “Unload the
Card?” or “Load the card?” will appear in the display. Press the Navigation control
towards m or l, then press the Navigation control to select YES to unload or load
the SD/MMC card to update the player. Otherwise, the SD/MMC card’s music files
will not be played.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
OPERATION
TURNING THE POWER ON/OFF
LOCK SWITCH
1
1
Turn the unit on by pressing the Power On/Off/ With the unit on, press and hold the MENU/Lock
Stop button; the Memorex start screen will appear button until LOCKED appears in the display; no
in the display temporarily. Then the Music Player buttons will function. This is useful when you do not
menu will appear and the MP3/WMA track’s want the track changed by accidentally pressing a
information will appear in the display. To turn the button. Press and hold the MENU/Lock button until
unit off, press and hold the Power On/Off/Stop UNLOCKED appears in the display to cancel the
button; “Hold Down To Power Off” will appear in Lock function.
the display. Do not release the Power On/Off/Stop
button until the unit turns off.
NOTE: After you have transferred music files to the player, when you turn on the player, the “Memorex”
start screen will appear in the display temporarily followed by “Internal Updating Music Library” and
“Create New Music Playlist” (if a SD/MMC card is inserted, “Ext card checking changes in music content”
will appear in the display temporarily). It will take several seconds to several minutes to update the
player’s library or the music files depending on the number of songs that you transferred to the player.
When done, the Music Player menu will appear in the display.
SPECIAL FEATURE
This unit has a special feature: when in Music Player menu or FM Radio mode, press and hold
the Navigation control towards L, the display will flip horizontally. Also, Navigation/Skip/Search
n and o will be reversed.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
OPERATION (CONTINUED)
TO LISTEN TO THE FM RADIO
1
1
2
2
Press the Menu/Lock button 1; the Main menu will
Turn the unit on by pressing the Power
On/Off/Stop button; the Memorex start
screen will appear in the display temporarily.
Then the Music Player menu will appear and
the MP3/WMA’s track information will appear
in the display.
appear. Push the Navigation control towards m or l
2
to select FM Tuner, then press the Navigation control 2;
the FM Tuner will appear.
NOTE: When you select the Radio mode for the first
time, the unit will automatically scan and set the available
stations into Presets 1 through 20. Then Preset 1 will
appear with the corresponding frequency tuned in.
3
4
1
AUTOMATIC TUNING: You can also push and
hold the Navigation control towards m or l 1
until "SCAN" appears and then release; the unit
will automatically search for the next strong
station.
Select a station by pushing the Navigation
control towards m or l.
Press the VOLUME +/- buttons 2 to increase or
decrease the volume.
ANTENNA
FM–The headphones act as an antenna for FM.
Extend the headphone wire for best FM
reception.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
OPERATION (CONTINUED)
TO ADD PRESETS
1
2
2
1
1
2
While in FM Playback mode, and with a Select a desired Preset by pushing the
desired station selected, press the
Menu/Lock button 1; the FM Menu will
appear. Push the Navigation control
towards L or M 2 to select Add to Preset,
Navigation control towards L or M 1, then
press the Navigation control 1 to add the
station to the Preset. To exit the FM Menu,
press the Menu/Lock button 2 twice.
then press the Navigation control 2.
TO LOAD PRESETS
1
1
2
2
Select a desired Preset by pushing the Navigation control
towards L or M, then press the Navigation control.
NOTE: You can also push the Navigation control towards
L (for Preset Up) or M (for Preset Down) to select the
desired preset station while in the FM playback mode
(with the radio frequency in the display).
While in FM Playback mode, press the
Menu/Lock button 1; the FM Menu will
appear. Push the Navigation control towards
L or M 2 to select Load Preset, then press
the Navigation control 2.
AUTO SCAN:
While in FM Playback mode, press the Menu/Lock button; the FM menu will appear. Push the
Navigation control towards L or M to select Auto Scan then press the Navigation control. The unit will
automatically scan and set the available stations into Presets 1 through 20. Then Preset 1 will appear
with the corresponding frequency tuned in.
NOTE: During Auto Scan, "SCAN" will appear in the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
OPERATION (CONTINUED)
TO DELETE ONE PRESET
1
1
2
2
While in FM Playback mode, press the Push the Navigation control towards L or M to
select the Preset station which you want to delete
and press the Navigation control. Select YES
(delete the Preset) or NO (cancel deleting the
Preset) by pushing the Navigation control towards
m or l, then press the Navigation control.
Menu/Lock button 1; the FM Menu will
appear. Push the Navigation control
towards L or M 2 to select Delete One,
then press the Navigation control 2.
TO DELETE ALL PRESETS
1
1
2
2
While in FM Playback mode, press the Press the Navigation control again and then
Menu/Lock button 1; the FM Menu will push the Navigation control towards m or l to
appear. Push the Navigation control towards select YES (delete all presets) or NO (cancel
deleting all presets) and press the Navigation
control.
L or M 2 to select Delete All, then press the
Navigation control 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
OPERATION (CONTINUED)
TO LISTEN TO MP3s/WMAs
1
1
2
2
If the unit is in the FM mode, press the MENU/Lock
button ‚; the FM menu will appear in the display. Push
the Navigation control towards L or M 2 to select Exit,
then press the Navigation control 2 to select it. The
Main menu will appear in the display. Select “Play Now”
by pushing the Navigation control towards m or l 2,
then press the Navigation control 2; the Music Player
menu will appear.
Turn the unit on by pressing the Power
On/Off/Stop button; the Memorex start
screen will appear in the display
temporarily. Then the Music Player menu
will appear and the MP3/WMA’s track
information will appear in the display.
4
3
3
1
To turn the unit off, press and hold the Power
On/Off/Stop button; “Hold Down To Power Off” will
appear in the display. Do not release the Power
On/Off/Stop button until the unit turns off.
NOTE:
Press the Navigation control 1 to start playback;
the MP3 information will appear/scroll across the
display. Press the VOLUME +/- buttons 2 to
increase or decrease the volume. To stop
playback, press the Power On/Off/Stop button 3.
•
See pages 7-16 for information on uploading MP3
and WMA files to this unit.
NOTE (AUTO RESUME): Each time you exit the Music Player mode or turn the unit off,
when the unit is turned back on or you enter the Music Player mode again, this unit will
resume at the beginning of the last track which was playing before turning the power off or
changing mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
OPERATION (CONTINUED)
TO PAUSE PLAYBACK
2
1
During playback, if you wish to pause the file
momentarily, press the Navigation control;
playback will pause and the timer will stop
counting.
Press the Navigation control again to resume
playback; the sound will return and the timer will
start counting again.
TO SELECT/BROWSE THROUGH THE FILES
1
2
1
For the Browse option, see more details below:
Artist: All Artists will be shown in the display. Select the
desired Artist by pushing the Navigation control towards
L or M then press the Navigation control. All the Artist’s
albums will appear; select the desired album by pushing
the Navigation control towards L or M then press the
Navigation control. Then, select the desired song by
pushing the Navigation control towards L or M then
press the Navigation control to start playback.
Press the MENU/Lock button 1; the Main menu
will appear. Scroll to Browse by pushing the
Navigation control towards m or l 2 then press
the Navigation control 2. Select the desired
Browse option (Artist, Album, Genre or All Songs)
by pushing the Navigation control towards L or
Album/Genre: All the albums/genres will appear. Select
the desired album/genre by pushing the Navigation
control towards L or M then press the Navigation
control. Then, select the desired song by pushing the
Navigation control towards L or M then press the
Navigation control to start playback.
M 2 then press the Navigation control 2.
All Songs: The song’s name will appear in the display.
Select the desired song by pushing the Navigation
control towards L or M then press the Navigation
control to start playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
OPERATION (CONTINUED)
FORWARD/REVERSE SKIP
During playback, push the Navigation control
towards l to advance the player to the
beginning of the next file. Push the
Navigation control towards l repeatedly to
advance the player to higher-numbered files.
During playback, push the Navigation
control towards m to move the player back
to the beginning of the currently playing
file. Push the Navigation control towards m
repeatedly to move the player back to
lower-numbered files.
1
HIGH-SPEED MUSIC SEARCH
During playback, push and hold the
Navigation control towards m or l to move
the player forward or backward within a file to
locate a specific musical passage. The player
will move forward or backward at high speed
as long as the button is held. When you
release the button, normal playback will
resume.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
25
OPERATION (CONTINUED)
SETTING THE EQUALIZER
2
1
1
2
Scroll to Equalizer by pushing the
Navigation control towards L or M, then
press the Navigation control.
Press the MENU/Lock button 1; the Main
menu will appear. Scroll to Settings by
pushing the Navigation control towards m or
l 2, then press the Navigation control 2.
4
3
Press the MENU/Lock button twice to exit and
return to the Music Player menu.
Select a desired EQ setting (Normal, X-
Bass, Rock, Classical, Jazz or Pop) by
pushing the Navigation control towards L or
M, then press the Navigation control.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
OPERATION (CONTINUED)
SETTING THE PLAY MODE
2
1
1
2
Scroll to Play Mode by pushing the
Navigation control towards L or M, then
press the Navigation control.
Press the MENU/Lock button 1; the Main
menu will appear. Scroll to Settings by
pushing the Navigation control towards m or
l 2, then press the Navigation control 2.
4
3
Press the MENU/Lock button twice to exit and
return to the Music Player menu.
Select the desired Play mode by pushing the
Navigation control towards L or M, then
press the Navigation control.
Normal:
Normal playback
Repeat One: Repeats the current track
Repeat All:
Shuffle:
Repeats all of the files
Randomly plays the files once
and then stops
Shuffle Repeat: Randomly plays all the files
repeatedly
Download from Www.Somanuals.com. All Manuals Search And Download.
27
OPERATION (CONTINUED)
SETTING THE CONTRAST
2
1
1
2
Scroll to Contrast by pushing the Navigation
control towards L or M, then press the
Navigation control.
Press the MENU/Lock button 1; the Main
menu will appear. Scroll to Settings by
pushing the Navigation control towards m or
l 2, then press the Navigation control 2.
4
3
Press the MENU/Lock button twice to exit and
return to the Music Player menu.
Push the Navigation control towards m or
l to decrease/increase the contrast, then
press the Navigation control.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
OPERATION (CONTINUED)
SETTING THE BACKLIGHT
2
1
1
2
Scroll to Backlight by pushing the
Navigation control towards L or M, then
press the Navigation control.
Press the MENU/Lock button 1; the Main
menu will appear. Scroll to Settings by
pushing the Navigation control towards m or
l 2, then press the Navigation control 2.
4
3
Press the MENU/Lock button twice to exit and
return to the Music Player menu.
Push the Navigation control towards L or
M to select the desired backlight time (time
the backlight will stay on after a button is
pressed–Off, 3 seconds, 5 seconds, 10
seconds or Always On), then press the
Navigation control.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
OPERATION (CONTINUED)
SETTING THE POWER SAVINGS
2
1
1
2
Scroll to Power Savings by pushing the
Navigation control towards L or M, then
press the Navigation control.
Press the MENU/Lock button 1; the Main
menu will appear. Scroll to Settings by
pushing the Navigation control towards m or
l 2, then press the Navigation control 2.
4
3
Press the MENU/Lock button twice to exit and
return to the Music Player menu.
Push the Navigation control towards L or M
to select the desired Power Savings (time the
unit will stay on before turning off due to
inactivity–Disable [ Off ], 1 Minute, 2 Minutes, 5
Minutes or 15 Minutes), then press the
Navigation control.
NOTE: Select Disable to disable this feature
and not have the unit enter the Power Savings
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
OPERATION (CONTINUED)
SETTING THE LANGUAGE
2
1
1
2
Scroll to Language by pushing the Navigation
control towards L or M, then press the
Navigation control.
Press the MENU/Lock button 1; the Main
menu will appear. Scroll to Settings by
pushing the Navigation control towards m or
l 2, then press the Navigation control 2.
4
3
Press the MENU/Lock button twice to exit and
return to the Music Player menu.
Push the Navigation control towards L or M
to select the desired Language the text on the
display will be in (English, Traditional Chinese,
Spanish, Italian, French, Dutch or Japanese),
then press the Navigation control.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
OPERATION (CONTINUED)
TO VIEW THE SYSTEM INFO (ABOUT)
2
1
1
2
Scroll to About by pushing the Navigation control
towards L or M, then press the Navigation
control. The unit will then display the Version.
Push the Navigation control towards M to view
the Internal Media (the total internal memory)
and Internal Free Space.
Press the MENU/Lock button 1; the Main
menu will appear. Scroll to Settings by
pushing the Navigation control towards m or
l 2, then press the Navigation control 2.
3
4
Press the MENU/Lock button three times to
exit and return to the Music Player menu.
Push the Navigation control towards M again
to view the External Media (the total external
memory) and External Free Space. (This
information will only be available if an external
media card is inserted.)
NOTE: If there is no SD/MMC card inserted,
the External Media and External Free Space
page will not be available.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before calling for service.
SYMPTOM
CAUSE
Battery is low/empty.
SOLUTION
Replace battery.
Unit will not
turn on.
Unit is not turned
on.
Headphones are not
inserted.
Press Power On/Off/Stop
button to turn the unit on.
Insert headphones.
No sound.
Volume is set too
low.
Raise the volume using the
Volume + button.
The MP3 or WMA files Download uncorrupted
are corrupted.
No files are in the
player.
files.
Upload files to the unit as
described on pages 13-16.
The computer is not
recognizing the
player.
The player is
Make sure player is
not securely connected. securely connected.
Win98 Driver isn’t installed Install Win98 driver and/or see
or computer is not
compatible.
pages 7-12 for
compatibility.
See page 16 to download
WMA files with DRM.
WMA files with DRM
can’t playback.
Incorrect downloading
methods.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
TROUBLESHOOTING GUIDE (CONTINUED)
SYMPTOM
No buttons work.
CAUSE
The Lock feature is
activated.
SOLUTION
Deactivate Lock feature as
described on page 19.
Unit needs to be reset Reset unit and/or
or firmware needs to be update firmware, see
updated.
pages 35-36.
Unit acting erratically. Unit needs to be reset Reset unit and/or
or firmware needs to be update firmware, see
updated.
pages 35-36.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
FORMATTING THE PLAYER
Formatting the Player
WARNING! Do not format this player unless it stops working and you are
instructed to do so by technical support personnel.
1. Use the USB cable to connect the
player and the computer.
2. Double click on My Computer, then
right click "MTP Player", "MMP3774"
or "Removable Disk" and left click on
"Format".
3a. For "MTP Player" or "MMP3774", at
the "Format" window, click OK to
confirm and the player will start to
format (see figure to the right). When
“MTP Player”
finished, click "OK" to close the
Format window.
3b. For "Removable Disk", at the
"Format" window, select "FAT 32" from the file system pull-down menu,
then click "Start" to format the unit (see figure above).
NOTE: Make sure you have selected "FAT 32" at the file system pull-
down menu; otherwise, after formatting, the player will not work properly.
Then, click OK to confirm and the player will start to format. When
finished, click "Close" to close the Format window.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
UPDATING THE FIRMWARE
WARNING! Do not update the firmware unless you are experiencing problems with
your digital audio device. Incorrect or faulty firmware installation will cause the player
to stop functioning.
2. Unzip the file, then double click setup.exe in the Desktop folder to install the
software to your computer.
3. Connect the player to the computer using the supplied USB cable and the
installation screen will appear. (If the installation screen does not appear, unplug
the USB cable and turn off the unit. Connect to the computer again and press and
hold the Power On/Off/Stop button until the installation screen appears.)
4. Follow the on-screen instructions to install the driver.
5. When finished, click START and locate the newly installed software “Beam
Cadillac” and select “Firmware Download”.
RESETTING THE UNIT
To reset the unit, remove the battery for a few seconds and then replace it. This will
reset the unit but all the default settings (i.e. Radio Presets, Play mode, Equalizer,
Contrast, Power Savings, etc.) will be saved in the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
SPECIFICATIONS
Audio
Frequency Range
Headphones Output
S/N Ratio
20Hz – 20KHz
5mW, 32ohm (Max. Vol)
85db (MP3)
File Support
MP3
MPEG 1/2/2.5 Layer 3
WMA
Windows Media Audio (WMA file with
DRM9 or DRM 10)
Bit Rate
32kbps–320kbps (MP3)
32kbps–192kbps (WMA)
FM Tuner
General
FM Frequency Range
Antenna
87.5MHz–108MHz
Earphones Cord Antenna
Dimension
Weight
USB
LCD
Built-in Memory
Max. Playtime
Supported OS
3.7 (W) x 0.8 (Thickness) x 1.4 (D) inches
1.2 ounces (without battery)
USB 2.0
Full Graphic with Backlight
512MB
Approx. 16 hours
Win ME, 2000, XP and Mac OSX
Win 98SE (Driver is required)
23° F to 104° F
Operating Temperature
Battery
1 x AAA battery
Specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
FOR FIRMWARE UPGRADE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
TO CHECK IF THERE IS NEW FIRMWARE AVAILABLE.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,
PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR TO MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL
AT 1-800-321-6993.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Memcorp, Inc.
Weston, FL
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|