Memorex MP3 Player MD6882 User Manual

MD6882  
User’s Guide  
50’S RETRO STYLE PERSONAL AM/FM  
STEREO/COMPACT DISC PLAYER WITH  
45 SECOND DIGITAL ANTI-SHOCK  
PROTECTION  
Before operating this product,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
please read these instructions completely.  
SAFETY PRECAUTIONS (CONTINUED)  
INFORMATION:  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interfer-  
ence to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the fol-  
lowing measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
• Do not open the CD compartment while the CD is rotating.  
• Always keep the CD compartment closed when not in use.  
• Keep all foreign objects out of the CD compartment.  
• Place the unit on a stable surface.  
• Avoid installing the unit in locations described below:  
• Places exposed to direct sunlight or close to heat radiating  
appliances such as electric heaters.  
• On top of other stereo equipment that radiates too much  
heat.  
• Places lacking ventilation or dusty places.  
• Places subject to constant vibration.  
• Humid or moist places.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dear Customer:  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of  
your musical enjoyment. Now it’s time to consider how you can maximize the fun and  
excitement your equipment offers. This manufacturer and the Electronic Industries  
Association’s Consumer Electronics Group want you to get the most out of your equipment  
by playing it at a safe level. One that lets the sound come through loud and clear without  
annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of  
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard  
against this by setting your equipment at a safe level BEFORE your hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future.  
After all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since  
hearing damage from loud noise is often undetectable until it is too late, this manufacturer  
and the Electronic Industries Association’s Consumer Electronics Group recommend you  
avoid prolonged exposure to excessive noise. This list of sound levels is included for your  
protection.  
Decibel  
Level  
30  
Example  
Quiet library, soft whispers  
40  
50  
60  
70  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
80  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT  
EXPOSURE:  
We  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
WantYou  
LISTENING  
ForALifetime  
100  
120  
140  
180  
Rocket launching pad  
EIA  
EST. 1924  
Information courtesy of the Deafness Research Foundation.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS  
12  
1
2
3
4
13  
14  
15  
16  
17  
18  
5
6
7
8
9
10  
11  
19  
1. Skip/Search/Tuning n Button  
2. Skip/Search/Tuning o Button  
3. PROG (Program) Button  
4. ESP/BAND Button  
13. PLAY/PAUSE (®p) /POWER  
ON Button  
14. STOP (I)/POWER OFF  
Button  
15. Display  
5. LINE OUT Jack (Side of Unit)  
6. MODE Button  
16. PRESET UP Button  
17. PRESET DOWN Button  
7. PHONES (Headphones) Jack  
(Side of Unit)  
18. Battery Compartment (Bottom  
of Unit)  
8. CD Compartment  
19. FUNCTION (CD/RADIO)  
Switch  
9. VOLUME Control  
10. DBBS (Bass Boost) Switch  
11. CD OPEN Switch  
12. DC 4.5V Jack (Rear of Unit)  
+
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER SOURCES  
This CD player requires either two (2) “AA” cell batteries (not included) or  
an AC adapter (not included).  
BATTERY INSTALLATION  
The battery indicator (  
batteries need replacing.  
) will appear in the CD display when the  
1. Open the battery compartment door on the  
bottom of the unit by sliding it out and lifting  
up. To prevent the possibility of losing the  
cover, it cannot be removed.  
2. Insert two (2) “AA” cell batteries (not included)  
according to the polarity diagram inside the  
battery compartment. Alkaline batteries are  
recommended for the longest playing time.  
BATTERY PRECAUTIONS  
Follow these precautions when using batteries in this device:  
1. Use only the size and type of batteries specified.  
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery  
compartment. Reversed batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc and rechargeable) or  
old batteries with fresh ones.  
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or  
injury from possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.  
(Follow battery manufacturer’s directions.)  
AC OPERATION  
To operate the unit using AC power, connect an AC adapter (not included) to  
an AC outlet having 120V, 60Hz AC only. Plug the small end into the DC  
4.5V jack on the rear of the unit and connect the other end into the AC outlet.  
The batteries are automatically disconnected when the AC adapter is used.  
CAUTION: When not using AC power, disconnect the AC adapter from  
the wall outlet by pulling the plug (not the cord). Do not touch the AC  
adapter with wet hands. Fully insert the plug without exposing any part of  
the blade.  
+
DC 4.5V  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
TURNING POWER ON/OFF  
BASS BOOST  
1
1
1
2
To emphasize the bass, slide the To turn the unit on, press the  
DBBS switch to the ON position. For  
normal bass, slide the DBBS switch to  
the OFF position.  
PLAY/PAUSE (®p)/POWER ON  
button .  
To turn the unit off, Press the STOP  
(I) /POWER OFF button ƒ.  
AUTO POWER OFF  
When the unit is stopped (Standby mode) for approximately one minute, the  
power will automatically turn off.  
Radio Sound Through a Home Audio System  
By using a home audio connection cable (not included), superb radio sound can  
be heard through your home audio system. Before making any connections, turn  
off the power to all equipment.  
Plug a connection cable (not included) between the LINE OUT jack on the side  
of the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to  
the amplifier’s PHONO jack.)  
NOTE: If the radio interferes with TV reception, move the unit away from the TV  
or turn off the power to this unit.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO OPERATION  
TO LISTEN TO THE RADIO  
2
3
2
1
2
1
1
Set the VOLUME control 1 to minimum  
and plug the headphones into the  
PHONES jack. Press the PLAY/PAUSE  
Slide the FUNCTION switch 1 to the  
RADIO position. Press the ESP/BAND  
button 2 to select a band (AM or FM).  
If listening to FM, press the MODE button  
to turn FM Stereo ON or OFF.  
®p)/POWER ON button 2 to turn the  
(
unit on.  
3
3
4
1
2
1
2
Press and release the Skip/Search/  
Tuning o 1 or n 2 button to tune a  
station. Press and hold the Skip/Search/  
Tuning o 1 or n 2 button for Auto Scan  
(see below).  
Adjust the VOLUME control 1 and DBBS  
switch 2 as desired. If FM STEREO  
reception is weak/noisy, press the MODE  
button 3 to turn off Stereo, in this case  
the reception will be monaural.  
ANTENNAS  
5
AM – This unit has a built-in ferrite bar  
antenna, which provides adequate reception  
in most areas. If reception is weak, turn the  
unit to improve reception.  
FM – The headphones act as an antenna for  
FM. Extend the headphone wire for best FM  
reception.  
To turn the radio off, press the STOP  
(I)/POWER OFF button.  
AUTO SCAN  
Press and hold the Skip/Search/Tuning o or  
n button for approximately one second and  
the unit will automatically search for the next  
available station.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO OPERATION (CONTINUED)  
TO SET AND RECEIVE A STATION INTO MEMORY  
You can set up to 10 AM and 10 FM stations into memory as follows:  
1
2
2
1
3
Tune a desired station as described in While the PROG indicator is blinking,  
the previous section. Press the PROG select the desired preset using the  
button; the PROG indicator will blink  
and preset number will appear in the  
display.  
PRESET UP 1 or DOWN 2 button,  
then press the PROG button 3 to set  
the memory.  
3
2
1
To recall a preset station, simply  
press the PRESET UP 1 or DOWN 2  
button to select the desired preset.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD OPERATION  
TO PLAY A CD (Standard, CD-R and CD-RW)  
2
1
2
1
Open the CD compartment lid by  
Press the PLAY/PAUSE (®p)/POWER  
sliding the CD OPEN switch 1 to the ON button to start playback. To pause  
PLAYBACK, press the PLAY/PAUSE  
(®p)/POWER ON button again, the  
elapsed time will blink. Press once  
again to resume playback.  
right. Gently press a disc, label side  
up, onto the spindle until it locks in  
place. Close the CD compartment lid.  
Insert headphones into the PHONES  
jack. Slide the FUNCTION switch 2 to  
the CD position.  
4
3
3
4
1
2
When the disc is through playing, it will  
stop. Press the STOP (I)/POWER  
OFF button to stop the disc before it is  
finished; the total number of tracks will  
appear. Press the STOP (I)/POWER  
OFF button again while in the stop  
mode to turn the unit off or wait  
approximately 60 seconds and the unit  
will automatically turn off.  
Adjust the VOLUME control 1 and  
DBBS switch 2 as desired. To skip  
forward or backward through the tracks  
on the disc, press the Skip/Search  
3 or  
4 button. To search  
forward or backward through the tracks  
on the disc, press and hold the  
Skip/Search  
3 or  
4 button.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD OPERATION (CONTINUED)  
NOTES:  
• This unit is capable of playing standard CDs or 3” singles; no adapter is required.  
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will  
show “no disc”.  
• As each track is played, the track number and elapsed time are shown in the display.  
• To remove the disc, open the CD Compartment, hold the edge of the CD and gently  
press the center pivot and lift the CD.  
• The maximum time of a CD is 74 minutes for this unit.  
• “OPEN” will appear in the display when the CD Door is opened.  
ANTI-SHOCK SYSTEM  
This CD player has a built-in Anti-Shock System that cuts down on CD skipping.  
Follow the steps below to activate and understand the Anti-Shock System.  
2
1
2
1
Open the CD compartment lid by sliding the  
CD OPEN switch 1 to the right. Gently  
press a disc, label side up, onto the spindle  
until it locks in place. Close the CD  
compartment lid. Insert headphones into the  
PHONES jack. Slide the FUNCTION switch  
2 to the CD position.  
With a CD inserted, press the  
PLAY/PAUSE (®p)/POWER ON  
button to turn the unit on.  
4
3
The Anti-Shock System will start Within a few seconds, the Anti-Shock  
automatically, the sound will mute for a indicator will fill to indicate music  
moment and the display will show the signals are stored in memory.  
Anti-Shock indicator with no bars in it.  
CONTINUED ON THE NEXT PAGE  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD OPERATION (CONTINUED)  
6
5
If the CD player is subject to vibration If all the bars disappear and the CD  
during playback, the bars will player is subject to immediate vibration,  
disappear one by one. During the the unit may skip.  
vibration, the music should continue to  
play the signals stored in the memory  
until the CD player can read the music  
data properly from the disc. At this  
time, the indicator will probably show  
fewer bars indicating the music signals  
stored in memory are low.  
8
7
If no more vibration occurs, the To turn the Anti-Shock System off,  
music signals are once again stored press the ESP/BAND button.  
into the memory and the indicator To turn the Anti-Shock System on,  
returns to full. When the memory is press the ESP/BAND button again.  
full, the top bar will blink and the  
disc rotation speed will drop to save  
power consumption.  
NOTES:  
When the CD player is used in a stable location, turn the Anti-Shock System  
off by pressing the ESP/BAND button. When the Anti-Shock System is Off,  
battery consumption is less.  
The Anti-Shock System provides for continuous sound output when unit is  
subject to vibration, but it will not correct errors, such as a defective or dirty  
CD.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD OPERATION (CONTINUED)  
TO REPEATEDLY PLAY BACK ONE TRACK  
1
2
1
2
3
1
4
2
3
With a CD inserted, press the The unit will then play the same track  
over and over until the STOP  
(I)/POWER OFF button 1 is pressed.  
Adjust the VOLUME control 2 and  
DBBS switch 3 as desired.  
PLAY/PAUSE (®p)/POWER ON  
button 1 to turn the unit on, then  
select a track using the Skip/Search o  
2 or n 3 button. Press the MODE  
button 4 once; the Repeat 1 indicator  
will appear in the display.  
TO REPEATEDLY PLAY BACK ALL TRACKS  
1
1
2
1
2
2
3
With a CD inserted, press the  
PLAY/PAUSE (®p)/POWER ON  
button 1 to turn the unit on. Press the  
The unit will then play all the tracks on  
the CD over and over until the STOP  
(I)/POWER OFF button 1 is pressed.  
Adjust the VOLUME control 2 and  
DBBS switch 3 as desired.  
MODE button 2 twice; the Repeat All  
ALL  
indicator  
display.  
will appear in the  
TO CANCEL OR STOP REPEAT PLAYBACK  
TO STOP REPEAT PLAYBACK, press the STOP (I)/POWER OFF button once.  
TO CANCEL REPEAT PLAYBACK, press the MODE button four times if in  
Repeat 1 mode, or three times if in Repeat All mode. The unit will continue  
normal playback.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD OPERATION (CONTINUED)  
INTRO PLAY  
1
4
2
1
1
2
3
2
3
With a CD inserted, press the  
PLAY/PAUSE (®p)/POWER ON  
button 1 to turn the unit on and press  
Press the PLAY/PAUSE (®p)/POWER  
ON button 1 to begin playback. The unit  
will play the first 10 seconds of each  
the STOP (I)/POWER OFF button 2 track. Adjust the VOLUME control 2 and  
to stop auto playback. Press the MODE  
button 3 three times; the INTRO  
indicator will blink in the display.  
DBBS switch 3 as desired. Press the  
STOP (I)/POWER OFF button 4 to  
stop Intro playback.  
TO RANDOMLY PLAY BACK A CD  
1
4
1
2
1
2
3
2
3
With a CD inserted, press the  
PLAY/PAUSE (®p)/POWER ON  
button 1 to turn the unit on and press  
Press the PLAY/PAUSE (®p)/POWER  
ON button 1 to begin playback. The  
unit will play all the tracks in random  
the STOP (I)/POWER OFF button 2 order. Adjust the VOLUME control 2  
to stop auto playback. Press the  
MODE button 3 four times; the RAND  
indicator will blink in the display.  
and DBBS switch 3 as desired. When  
all the tracks have been played, the  
unit will stop. Press the STOP  
(I)/POWER OFF button 4 to stop  
Random playback.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD OPERATION (CONTINUED)  
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)  
2
1
1
2
2
1
3
3
With  
a
CD inserted, press the  
Select the first track to be played back  
using the Skip/Search o 1 or n ƒ  
button, then press the PROG button 3  
again. Repeat this step to program  
additional tracks up to a maximum of  
24 tracks.  
PLAY/PAUSE (®p)/POWER ON button  
1 to turn the unit on and press the  
STOP (I)/POWER OFF button 2 to  
stop auto playback. Press the PROG  
button 3; the PROG indicator will  
appear in the CD display.  
1
4
3
1
2
2
3
To skip forward or backward through  
the programs, press the Skip/Search o  
1 or n ƒ button. When the disc is  
through playing, it will stop.  
Press the PLAY/PAUSE (®p)  
/POWER ON button 1 to begin  
Programmed playback and adjust the  
VOLUME control 2 and DBBS switch  
3 as desired.  
NOTES:  
Press the STOP (I)/POWER OFF button to stop the disc before it is finished.  
As each program is played, the track number is shown in the display.  
To clear the memorized program: press the STOP (I)/POWER OFF button  
again while in the stop mode, wait approximately 60 seconds and the unit will turn  
off or open the CD compartment.  
Programming is the ability to preselect the order in which a series of tracks  
will be played.  
Each track may be stored in the program memory as many times as desired  
(up to 24 tracks).  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
Caring for Compact Discs  
Treat the compact disc carefully. Handle the  
compact disc only by its edges. Never allow your  
fingers to come in contact with the shiny,  
unprinted side of the compact disc.  
Do not attach adhesive tape, stickers, etc. to  
the compact disc label.  
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use  
detergents or abrasive cleaners to clean the compact disc. If necessary, use a  
CD cleaning kit.  
If a compact disc skips or gets stuck on a section of the disc, it is probably dirty  
or damaged (scratched).  
When cleaning the compact disc, wipe in straight lines from the center of the  
compact disc to the outer edge of the compact disc. Never wipe in circular  
motions.  
Z
This unit is designed to play only compact discs bearing the  
identification logo as shown here. Other compact discs may not  
conform to the CD standard and may not play properly.  
Compact discs should be stored in their cases after each use to avoid  
damage.  
Do not expose compact discs to direct sunlight, high humidity, high  
temperatures, or dust, etc. Prolonged exposure or extreme temperatures can  
warp the compact disc.  
Do not stick or write anything on either side of the compact disc. Sharp writing  
instruments or the ink may damage the surface.  
Cleaning the Unit  
To prevent fire or shock hazard, disconnect your unit from the AC power  
source when cleaning.  
The finish on your unit may be cleaned with a dust cloth and cared for as other  
furniture. Use caution when cleaning and wiping the plastic parts.  
Mild soap and a damp cloth may be used on the front panel.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
If you experience a problem with this unit, check the chart below before  
calling for service.  
SYMPTOM  
Unit will not  
CAUSE  
SOLUTION  
Weak or dead batteries Replace batteries and insert  
turn on.  
or inserted incorrectly. correctly.  
Weak or dead Re-  
chargeable batteries.  
AC adapter  
not connected.  
CD compartment  
not closed.  
Recharge or replace  
batteries (if used).  
Check AC adapter  
connection.  
Disc will not play.  
Close CD compartment.  
Disc inserted  
incorrectly.  
Dirty or defective  
disc.  
Reinsert disc correctly.  
Try another disc.  
Moisture  
condensation  
on disc.  
Wipe disc with soft  
cloth.  
Erratic CD playback.  
Dirty or defective  
disc.  
Clean or replace disc.  
No sound from  
headphones.  
Headphone  
plug not inserted  
correctly.  
Reinsert headphone  
plug correctly.  
VOLUME control  
set to minimum.  
Weak batteries.  
Defective disc.  
ESP is not activated.  
Station not tuned  
Increase volume.  
Replace batteries.  
Try another disc.  
Press the ESP/BAND button.  
Retune AM or FM  
ESP not working.  
Noise or sound  
distorted on radio.  
properly for AM or FM  
.
broadcast station.  
FM: Headphone wire  
not extended.  
Extend Headphone wire.  
AM: Unit is not  
Rotate unit until best  
reception is obtained.  
Retune station.  
Press MODE button to turn  
Stereo on.  
positioned correctly.  
Poor FM signal.  
MODE button  
FM STEREO indicator  
does not light.  
not set to Stereo.  
No sound.  
FUNCTION switch is not Set FUNCTION switch to the  
in the desired position. desired position.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Power requirements......................................2 x LR6 "AA" alkaline battery  
DC in 4.5V adaptor (center positive)  
Frequency Range (FM) ................................................... 87.5 ~ 108 MHz  
Frequency Range (AM) ....................................................530 ~ 1720 KHz  
D/A conversion...................................1-bit DAC eight times oversampling  
Frequency response ............................................20~20,000Hz (+1,-3 dB)  
Anti-shock. .......................................................................45 second buffer  
Output level...........................................Line output: 0.6 Vms (47K ohms)  
Headphones: 16mW (32 ohms)  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE  
VISIT OUR WEBSITE AT  
WWW.MEMOREXELECTRONICS.COM  
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.  
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90  
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR  
PLACE OF PURCHASE OR MEMOREX.  
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT  
1-800-321-6993.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memcorp, Inc.  
Weston, FL  
Printed in Hong Kong  
Download from Www.Somanuals.com. All Manuals Search And Download.  

La Crosse Technology Portable Radio WS 7076U User Manual
Legacy Car Audio Car Video System LSWR72IR User Manual
Lennox International Inc Humidifier WB2 12 User Manual
LG Electronics Cell Phone VX7000 User Manual
LG Electronics CRT Television 29FX6ALX User Manual
Lincoln Electric Welding System IM10028 B User Manual
Locke Lawn Mower TVM 3077 User Manual
Marshall electronic Computer Monitor M LYNX 10W User Manual
Marshall electronic Flat Panel Television V R84DP SD User Manual
Metz Camcorder 34 AF 3M User Manual