6
Unit
c
Table
Stand
Packaging material
d
Unit
Table
Warranty Card
Screw x 6
Stand
Packaging material
MLT3221
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Widescreen LCD HDTV
with full function remote control
Model MLT3221
Please read these instructions completely,
before operating this product.
Download from Www.Somanuals.com. All Manuals Search And Download.
WEEE
This product contains electrical or electronic materials. The presence
of these materials may, if not disposed of properly, have potential
adverse effects on the environment and human health. Presence
of this label on the product means it should not be disposed of as
unsorted waste and must be collected separately. As a consumer, you
are responsible for ensuring that this product is disposed of prop-
erly.
This TV incorporates High-Definition Multimedia Interface (HDMITM) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double -D symbol are trademarks of Dolby Laboratories.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Warnings and Precautions
Important Safety Instructions....................................................................................... 2
Chapter ꢀ Introducing the LCD TV
Key Features ............................................................................................................... 5
Package Contents ....................................................................................................... 6
Setting Your LCD TV.................................................................................................... 7
Your LCD TV................................................................................................................ 9
Your Remote Control ..................................................................................................11
Chapter 2 Installing the LCD TV
Connecting a TV Cable or an Antenna ...................................................................... 13
Connecting a VCR..................................................................................................... 18
Connecting a Video Camera or Game Console ........................................................ 19
Connecting a DVD Player.......................................................................................... 20
Connecting a Digital TV Cable Box or Digital Satellite Receiver ............................... 22
Connecting an AV Equipment with HDMI Connector................................................. 23
Connecting an AV Equipment with DVI Connector.................................................... 24
Connecting a PC........................................................................................................ 25
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System........................ 26
Chapter 3 Using the Features
Wide Screen Viewing ......................................................................................27
Operating the Menu........................................................................................28
Customizing the VIDEO Settings ......................................................................30
Customizing the AUDIO Settings ......................................................................32
Customizing the TV Settings ............................................................................34
Customizing the SETUP Settings......................................................................36
Using the Program Block Settings.....................................................................40
Using the Program Guide ................................................................................45
Troubleshooting.................................................................................................... 46
Specification........................................................................................................... 47
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Chapter 1
Introducing the LCD TV
Key Features
Various Audio/Video terminals for external equipment connection
▪
▪
▪
▪
▪
▪
▪
▪
2 sets of composite A/V input terminals
1 set of S-VIDEO terminals
2 sets of component Video input terminals
1 VGA/ Audio input terminals
2 HDMI/Audio input terminals
1 set of Audio(L/R) output terminals
2 SPDIF output terminals (Optical x 1 /Coaxial x 1)
1 Headphone terminal
The built-in TV tuner to receive HD ATSC
▪
This function allows the reception of HD broadcasting without the addition of a set top
box.
High Definition Multimedia Interface (HDMI)
▪
High Definition Multimedia Interface (HDMI) is a small, user-friendly interconnect that
can carry up to 5 Gbps of combined video and audio in a single cable. This system
eliminates the cost, complexity and confusion of multiple cables used to connect
current A/V systems.
HDTV Component Video Inputs
▪
Offers the best video quality for DVD(720p,HD1080i) and digital set-top-box
(720p,HD1080i) connections.
3D Digital Noise Reduction
This function can digitally reduce image noise to provide better picture quality.
▪
Film-Mode Detection (3:2 Reverse Pull Down)
▪
This function can automatically detect content derived from film and adjust the
interlacer’s frame matching to provide a more natural-looking, clearer image of the
moving picture.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Package Contents
Make sure all of the following contents are included.
LCD TV
Bottom Stand(151-700-BF327WV3H)
/Screw Driver and 4 Screws
Remote Control
VIDEO Cable
(845-042-GF1XABH)
AUDIO Cable
Warranty Card
Power Cord
(601-181-3200-LIH)
Warranty Card
User’s Manual
Quick Start Guide
Quick Start Guide
USER MANUAL
These items are all you need to set up and operate the LCD TV in its basic configuration.
Make sure all of the above contents are included in the package. If you are missing
any items, please contact the customer service department.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Setting Up Your LCD TV
How to install the TV Stand
If you prefer to mount your new TV on a wall instead of attaching it to the stand, please
reference the instructions included in the wall mounting kit(not included).
Attach the Stand the TV with the bottom foam packaging material still
attached.
Read all instructions before continuing with the stand installation.
a. Lift foam packaging material from the top of the LCD out of the box.
b. Lift LCD out of the box, with the bottom foam packaging material still attached, and place
onto a stable surface.
a
b
Protective bag
Stand
Shipping box
Table
c. Remove protective bag from LCD unit, but DO NOT remove the bottom foam packaging
material from the TV.
d. Locate the place on the back of the TV to attach the stand. Secure the stand to the LCD
with all four screws.
Unit
c
Table
Stand
Packaging material
d
Unit
Table
Screw x 4
Stand
Packaging material
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
How to setup the TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal
(refer to page15-18).
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert two AAA batteries in remote control(battery not included).
Stepꢀ Slide the back cover up to open the
battery compartment of the remote
control.
Step2 Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suffer damage.
Connect other an external AV device (refer to page18-26).
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Your LCD TV
Front/Right Side View and Controls
IR
Infrared Receiver.
LED
The LED light is blue when
the LCD TV is in standby
and the LED light indicates
no colour when powered up.
VOLUME+/-
Adjusts the volume up and down.
Selects the main-menu item and change
values for items when in the OSD mode.
AVꢀ IN
Connects to the composite
Video and Audio output
jacks on external video
equipment.
VIDEO
L
CHANNEL▲▼
R
Scans up and down through channels.
Selects sub-menu item when in the OSD
mode.
VIDEOꢀ IN
MENU
HEADPHONE
Press once to display the OSD (on
screen display), press again to turn the
OSD off.
Connects to the external
headhone for private
listening.
INPUT
Chooses from different input signal
sources.
Turns the LCD TV on and into standby mode.
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Rear View and Jacks
VIDEO2 IN
Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment.
HDMI IN
Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced,
high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for
DVI connection.
S-VIDEO IN
Connects to the S-VIDEO and AUDIO(L/R) output jacks on external
video equipment.
VGA IN
Connects the PC, or other AV equipment with VGA and
AUDIO(L/R) output jacks.
HDMI 1 IN
HDMI 2 IN
VGA IN
AUDIO OUT
YPbPr1 IN
DIGITAL
STEREO
AUDIO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
HDTV/TV
Air/Cable
L
L
R
R
L
L
R
R
L
L
R
L
COAXIAL
Pr
VHF/UHF IN
R
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPr2 IN
S-VIDEO IN
VIDEO2 IN
YPbPrꢀ IN/YPbPr2 IN
Connects to the DVD player, Digital Set-Top-Box, or other AV
equipment with component(YPbPr) video and audio output jacks.
AUDIO OUT-STEREO
Connects to the AUDIO(L/R) input jacks on AV equipment.
AUDIO OUT-DIGITAL-OPTICAL/COAXIAL
Connects to the DIGITAL AUDIO jack on the digital/standard
5.1 audio system.
AIR/CABLE IN
Connects RF input from VHF/UHF antenna or cable
to receive high/standard definition television.
AC IN
Connects to the AC power cord.
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Your Remote Control
Turns the LCD TV on and off.
ꢀ
MTS
Cycles through the multi-channels TV
sound(MTS) options: SAP/MONO/
STEREO
2
ꢀ
3
ꢁ
S.MODE
Selects sound effect options: Surround/
Live/Dance/Techno/Classic/Soft/Rock/
Pop/Off.
2
3
ꢁ
ꢂ
P.MODE
P.SIZE
Selects picture mode: Vivid/Hi-Bright/
Cinema/Sport/User
ꢃ
ꢄ
Cycles through Wide mode settings :
NORMAL /FULL/WIDE
ꢂ
ꢃ
ꢅ
CAPTION Cycles through the Closed Caption:
.Anlalog Closed Caption:CC1/CC2/
CC3/CC4/T1/T2/T3/T4/Off
.Digital Closed Caption:Service1/
Service2/Service3/Service4/Service5/
Service6/Off
ꢆ
ꢀ0
ꢀ2
ꢀꢀ
ꢄ
ꢅ
SLEEP
Cycles through the LCD TV sleep timer:
OFF/10/20/30/40/50/60/90/120 mins
ꢀ3
0-ꢆ
Select and switch to a channel by using
0-9 buttons.
In HDTV mode, use with 0-9 and
buttons to select a digital channels.
ꢆ
JUMP
MUTE
VOL.+-
CH.+-
Returns to previously selected channel.
Mutes and restores the audio
ꢀ0
ꢀꢀ
Increases and decreases volume.
Scans up and down the channels
ꢀ2
ꢀ3 INPUT
Pressing INPUT display the source list,
use ▲▼ to select the video equipment
connected to the video inputs of your
LCD TV : TV/VIDEO1/VIDEO2/VIDEO3/
VIDEO4/VIDEO5/VIDEO6/VIDEO7/
COMPUTER
Input Source
TV(CABLE/AIR)
VIDEO1 (SIDE)
ꢅꢁꢂ-0ꢁ2-GFꢀXABH
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
GUIDE
Displays the Program Guide on the
screen. Pressing again to turn GUIDE off.
ꢀꢁ
ꢀꢂ EXIT
▲▼►◄
Exits the OSD menu.
Cycles through OSD options and
selects individual menu items.
OK confirms option settings.
ꢀꢃ
OK
ꢀꢄ INFO
Pressing repeatedly displays a variety of
information such as the current channel
and the input source.
ꢀꢅ
ꢀꢆ
MENU
Displays the OSD menu on the screen.
GREEN In Program Guide, press to select first
program of next day.
RED
In Program Guide, press to select first
program of previous day.
20
2ꢀ
22
YELLOWIn Program Guide, press to view previous
page of detailed program description.
ꢀꢁ
ꢀꢃ
ꢀꢂ
BLUE
In Program Guide, press to view next page
of detailed program description.
23
LIST
Displays the received channel list
Channel List
7-1 KABC-DT
9-1 KQED-HD
9-2 KOED-SD
ꢀꢅ
2ꢀ
22
ꢀꢄ
ꢀꢆ
20
8
CCT
12
13
15
2ꢂ
FAV.CH
Pressing FAV.CH display favorite channels.
2ꢁ
2ꢂ
23
2ꢁ
FREEZE
In TV mode, pressing FREEZE to freeze
the current picture, press again to restore
the picture.
2ꢃ
TIMER
Displays the current time on the screen.
2ꢃ
Effective range:
The remote can control the LCD TV from up to ꢂm away, if pointed directly at the receiver.
ꢀ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Chapter 2
Installing the LCD TV
Refer to the owner’s manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets
until all other connections are completed.
Connecting a TV Cable or an Antenna
Antenna Connection
The antenna requirements for good color TV reception are more important than those for a black &
white TV reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connection that is provided with the various antenna
systems.
■
A ꢄꢂ-ohm system is generally a round cable (not included) with F-
type connector that can easily be attached to a terminal without
tools.
F-type connector
ꢄꢂ-ohm coaxial cable (round)
■
A 300-ohm system is a flat twin-lead cable (not included) that can
be attached to a ꢄꢂ-ohm terminal through a 300-ꢄꢂ-ohm adapter
(not included).
300-ohm twin-lead cable (flat)
ꢀ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Use one of the following two diagrams when connecting an outdoor antenna.
A: Shows how to use a VHF/UHF combination outdoor antenna.
B: Shows how to use a separate VHF and/or UHF outdoor antenna.
A. Combination VHF/UHF antenna
VHF/UHF
Antenna
300/75-ohm adapter
(not included)
VHF/UHF
Antenna
300-ohm twin-
lead cable
75-ohm
coaxial cable
B. Separate VHF and/or UHF antennas
UHF
Antenna
Combiner
(not included)
300-ohm twin-
lead cable
IN
OUT
75-ohm
coaxial cable
VHF
Antenna
300-ohm twin-
lead cable
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Cable TV (CATV) Connection
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building
accurately, or as close to the point of cable entry as possible. Use of this TV for other than
private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for
the use of the general public may require authorization from the broadcast/cable company, and/
or program owner.
■
■
A ꢄꢂ-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the ꢄꢂ-ohm coaxial cable to the set, connect the ꢄꢂ-
ohm cable into the ANT. terminal.
Some cable TV companies offer premium pay channels. Since the
signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the
cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,
consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company.
One possible method of connecting the coverter/descrambler provided by your cable TV
company is shown in the diagram below.
RF switch
(not included)
2 set signal
splitter
(not included)
A
IN
B
Cable TV Line
OUT
Cable TV converter/
descrambler
VHF/UHF IN
(not included)
■ The RF switch (not included) is required to provide two inputs (A and B). Setting
the RF switch to position A allows viewing of all unscrambled channels by using
the TV channel keys.
■
Setting the RF switch to position B allows viewing of all scrambled channels via
the converter/descrambler by using the converter channel keys.
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.
HDTV/TV
Air/Cable
VHF/UHF IN
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
HDTV/TV
Air/Cable
VHF/UHF IN
Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will not
be used for a long period of time. The POWER button on the front panel is only
used for switching the LCD TV into standby, it does not disconnect the device
from the main voltage. To completely disconnect the main voltage, please
remove the power plug from the socket.
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Press the INPUT button on the remote to display the Input Source List. Use the ▲▼ buttons to
select TV and press the OK button.
Input Source
TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
VIDEO6 (HDMI 1)
VIDEO7 (HDMI 2)
COMPUTER(VGA)
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the TV.
Channel Scan
Tuner Mode
Channel Skip
Favorite List
Time Zone
Cable
Eastern Time
TV
Select
Exit
Press the ▼ button to select Channel Scan, and press the OK button.
The Channel Scan automatically creates a list of receivable channels. Press the MENU
button at any time to interrupt the memorization process.(the list cannot be created if
interrupted)
Status: Scanning.....
Analog Channels: 2ꢂ
Digital Channels: 0
Cable
ꢁꢄ%
The Channel Scanning will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Scanning for each
RF input to create a list of available channels from both inputs.
Press the OK button to display the received channel list. Then press ▲▼ to select a
channel and press again the OK button to display the channel detail.
Channel Detail
Channel List
5-2 RF5-2
Calfornia’s Gold
9-1 KQED-HD
9-2 KOED-SD
8
CCT
12
13
15
Or, use the ▪ (Input button) with 0-ꢆ buttons to select digital channel( for example 9.1)
The digital main channel might include many subchannels (for example ꢆ-ꢀ, ꢆ-
2..) that are showing program at the same time.
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a VCR
Rear of TV
HDMI 1 IN
HDMI 2 IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPr1 IN
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
HDTV/TV
Air/Cable
L
L
R
R
L
L
R
R
L
L
R
L
COAXIAL
Pr
VHF/UHF IN
R
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPr2 IN
AUDIO Cable
S-VIDEO Cable
AV Cable
A
B
METHOD A:
Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s
VIDEO2 IN jacks.
METHOD B:
Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio
inputs. Use a S-Video cable to connect the VCR’s s-video output jack to the LCD TV’s
S-VIDEO IN input jack.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the
button on the remote to turn on the LCD TV.
To watch a videotape, press the INPUT button on the remote to select
VIDEO2( METHOD A), or VIDEO3 (METHOD B).
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a Video Camera or Game console
Rear of TV
Right Side
HDMI 1 IN
HDMI 2 IN
VGA IN
AUDIO
AUDIO OUT
VIDEO
L
YPbPr1 IN
Pr
DIGITAL
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
HDTV/TV
Air/Cable
L
L
R
R
L
L
R
R
L
L
R
L
COAXIAL
Pr
R
VHF/UHF IN
VIDEOꢀ IN
R
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPr2 IN
S-VIDEO IN
VIDEO2 IN
AUDIO Cable
or
S-VIDEO Cable
GAME CONSOLE
B
A
AV Cable
METHOD A:
Use a composite cable to connect the video camera’s or game console’s composite
video/audio jacks to the LCD TV’s VIDEO2 IN jacks or VIDEO1 IN jacks.
METHOD B:
Use an audio cable to connect the video camera’s or game console’s audio output
jacks to the LCD TV’s audio inputs. Use an S-Video cable to connect the video
camera’s or game console’s s-video output jack to the LCD TV’s S-VIDEO IN input
jack.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch a video vis camera or game console, press the Input button on the remote to
select VIDEO2/VIDEOꢀ( METHOD A), or VIDEO3 (METHOD B).
Not all cameras have the ability to connect to a TV. Please check your video camera
user guide for compatibility.
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a DVD Player
Rear of TV
HDMI 1 IN
HDMI 2 IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPr1 IN
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
HDTV/TV
Air/Cable
L
L
R
R
L
R
L
L
R
L
COAXIAL
Pr
VHF/UHF IN
R
R
or
Pb Pr
COMPONENT/AUDIO Cable
AUDIO Cable
S-VIDEO Cable
AV Cable
HDMI Cable
Pb Pr
A
B
C
D
DVD PLAYER
METHOD A:
Use a composite cable to connect the DVD player’s composite video/audio jacks to the
LCD TV’s VIDEO2 IN jacks.
METHOD B:
Use an audio cable to connect the DVD player’s audio output jacks to the LCD TV’s
audio inputs. Use an S-Video cable to connect the DVD player’s s-video output jack
to the LCD TV’s S-VIDEO IN input jack.
METHOD C:
Use a component cable to connect the DVD player’s component output jacks to the LCD
TV’s YPbPr1 IN or YPbPr2 IN input jacks.
Use an audio cable to connect the DVD player’s component audio jacks to the LCD TV’s
audio input jacks.
METHOD D:
Use a HDMI cable to connect the DVD player’s HDMI output jacks to the LCD TV’s
HDMI 1 IN or HDMI 2 IN input jacks.
The component video jacks on your DVD player are sometimes labeled
YPbPr, or YCbCr. For an explanation of component video, see your DVD
player’s user guide.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch a DVD, press the Input button on the remote to select
VIDEO2( METHOD A), or VIDEO3 ( METHOD B), or VIDEOꢁ/VIDEOꢂ (METHOD C).
For best picture quality, if your equipment has component video output, use
a component cable instead of a composite video or S-video cable.
2ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a Digital TV Cable Box or Digital Satellite Receiver
Rear of TV
HDMI 1 IN
HDMI 2 IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPr1 IN
Pr
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
HDTV/TV
Air/Cable
L
L
R
R
L
R
L
L
R
L
COAXIAL
Pr
VHF/UHF IN
R
R
VIDEO
AUDIO
S-VIDEO
AUDIO
S-VIDEO IN
VIDEO2 IN
Pb Pr
COMPONENT/AUDIO Cable
A
Pb Pr
B
HDMI Cable
METHOD A:
Use a component cable to connect the satellite receiver’s/TV Cable Box’s component
(YPbPr1) output jacks to the LCD TV’s component input jacks.
Use an audio cable to connect the satellite receiver’s/TV Cable Box’s component audio
jacks to the LCD TV’s audio input jacks.
METHOD B:
Use a HDMI cable to connect the satellite receiver’s/TV Cable Box’s HDMI output jacks
to the LCD TV’s HDMI 1 IN or HDMI 2 IN input jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the
button on the remote to turn on the LCD TV.
To watch programs via satellite receiver or TV Cable Box, press the Input button on the
remote to select VIDEOꢁ/VIDEOꢂ.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting an AV Equipment with HDMI Connector
Rear of TV
HDMI 1 IN
HDMI 2 IN
VGA IN
AUDIO
AUDIO OUT
YPbPr1 IN
Pr
DIGITAL
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
HDTV/TV
Air/Cable
L
L
R
R
L
L
R
R
L
L
R
L
COAXIAL
Pr
VHF/UHF IN
R
R
O
AUDIO
S-VIDEO
AUDIO
YPbPr2 IN
S-VIDEO IN
VIDEO2 IN
HDMI Cable
AV EQUIPMENT
Use a HDMI cable to connect the AV equipment’s HDMI output jack to the LCD TV’s HDMI IN
jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
Press the Input button on the remote to select VIDEOꢃ.
The HDMI connector provides both video and audio signals, it’s not
necessary to connect the audio cable.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting an AV Equipment with DVI Connector
Rear of TV
HDMI 1 IN
HDMI 2 IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPr1 IN
Pr
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
HDTV/TV
Air/Cable
L
L
R
R
L
L
R
R
L
L
R
L
COAXIAL
Pr
VHF/UHF IN
R
R
O
AUDIO
S-VIDEO
AUDIO
YPbPr2 IN
S-VIDEO IN
VIDEO2 IN
AUDIO Cable
AUDIO
DVI IN
L
R
HDMI-to-DVI Cable
AV EQUIPMENT
Use a HDMI-to-DVI cable to connect the AV equipment’s DVI output jack to the LCD TV’s
HDMI IN jacks.
Use an audio cable to connect the AV equipment’s audio output jacks to LCD TV’s HDMI
AUDIO jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the
button on the remote to turn on the LCD TV.
Press the Input button on the remote to select VIDEOꢃ.
If the LCD TV is connected to AV equipment’s DVI connector, you will need
an HDMI-to-DVI cable or an HDMI adapter(not suplied) and an audio cable.
2ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a PC
Rear of TV
HDMI 1 IN
HDMI 2 IN
VGA IN
DIO
AUDIO OUT
YPbPr1 IN
DIGITAL
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
HDTV/TV
Air/Cable
R
R
L
L
R
R
L
L
R
L
COAXIAL
Pr
VHF/UHF IN
R
R
VIDEO
AUDIO
YPbPr2 IN
VIDEO2 IN
AUDIO Cable
VGA Cable
PC
Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input
jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the
button on the remote to turn on the LCD TV.
Press the Input button on the remote to select COMPUTER.
2ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System
For better sound quality, you may want to play the LCD TV audio through your stereo system.
HDMI 1 IN
HDMI 2 IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPr1 IN
Pr
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
HDTV/TV
r/Cable
L
L
R
R
L
L
R
R
L
L
R
L
COAX
Pr
F/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPr2 IN
S-VIDEO IN
VIDEO2 IN
AUDIO Cable
B
A
Audio Receiver
Audio Amplifier
Connecting to Audio Receiver:
Use an audio cable to connect the audio receiver’s audio LINE IN jacks to LCD TV’s
AUDIO OUT jacks.
Connecting to Digital ꢂ.ꢀ Sound System:
METHOD A:
Use a optical cable to connect the audio amplifier’s OPTICAL IN jacks to LCD TV’s
OPTICAL OUT jacks.
METHOD B:
Use a coaxial cable to connect the audio amplifier’s COAXIAL IN jacks to LCD TV’s
COAXIAL OUT jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the
button on the remote to turn on the LCD TV.
2ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Chapter 3
USING THE FEATURES
Wide Screen Viewing
Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through
the following wide screen settings. Press the P.SIZE button repeatedly to select the screen
format you want.
FULL
Stretches the image vertically and
horizontally to keeps the image size
consistent in the center of the screen and
stretches the sides
WIDE
Stretches the image vertically and
horizontally to fill the screen at 1:1.85
aspect ratio
NORMAL
Displays at 4:3 aspect ratio
NORMAL is not available when you are watching ꢄ20p, ꢀ0ꢅ0i,
source.
2ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Operating the Menu
Press the button to turn the LCD TV on.
Press the MENU button on the remote control, the on-screen menu will appear on the
screen. Use the ◄► buttons to select your main menu option.
VIDEO MENU:
Allows you to make adjustments to your picture settings.
▪
If the signal source is TV/VIDEO/SVIDEO/YPbPr/
HDMI, the VIDEO MENU appears as:
▪
If the signal source is VGA, the VIDEO MENU
appears as:
Picture Mode
Contrast
User
Picture Mode
Contrast
User
ꢂ0
ꢂꢁ
ꢂꢁ
0
ꢂ0
ꢂꢁ
Brightness
Saturation
Brightness
Color Temperature
Noise Reduction
VGA
Hue
Medium
Sharpness
Color Temperature
Noise Reduction
ꢂ
Medium
Select
Video
Exit
Video
Select
Exit
AUDIO MENU:
Allows you to customize the audio options and effects.
▪
If the signal source is VIDEO/SVIDEO/YPbPr/
HDMI/VGA, the AUDIO MENU appears as:
▪
If the signal source is TV, the AUDIO MENU
appears as:
Bass
ꢂ0
ꢂ0
0
Bass
ꢂ0
ꢂ0
0
Treble
Treble
Balance
Balance
Sound Effect
Speaker
Audio Out
Sound Effect
MTS
Surround
Stereo
Surround
On
SPDIF Type
Audio Language
Speaker
Dolby Digital
English
Variable
On
Audio Out
Variable
Audio
Select
Exit
Audio
Select
Exit
2ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
TV MENU:
Allows you to edit and label channels.
Channel Scan
Tuner Mode
Channel Skip
Favorite List
Time Zone
Cable
Eastern Time
TV
Select
Exit
SETUP MENU:
Allows you to set up a variety of features: Language, Closed Caption, reset, Parental Control, time Setup.
▪
If the signal source is TV/VIDEO/S-VIDEO/Ypbpr,
the SETUP MENU appears as:
▪ if the signal source is HDMI/VGA, the SETUP
MENU appears as:
OSD Language
Time Setup
Closed Caption
Parental
English
Middle
OSD Language
Time Setup
Parental
English
Middle
Gamma
Gamma
Reset Default
Reset Default
Setup
Select
Exit
Setup
Select
Exit
Use the ▲▼ buttons to highlight the option of the sub-menu, and press the OK button.
While in adjustment mode, and use the ◄► buttons to change the value of the item.
Press the EXIT button to exit the menu.
2ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Customizing the VIDEO Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the VIDEO.
Use the ▲▼buttons to highlight an individual VIDEO option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu
▪
If the signal source is TV/VIDEO/S-VIDEO/Ypbpr/
HDMI, the VIDEO MENU appears as:
▪ if the signal source is VGA, the VIDEO MENU
appears as:
Picture Mode
Contrast
User
Picture Mode
Contrast
User
ꢂ0
ꢂꢁ
ꢂꢁ
0
ꢂ0
ꢂꢁ
Brightness
Saturation
Brightness
Color Temperature
Noise Reduction
VGA
Hue
Medium
Sharpness
Color Temperature
Noise Reduction
ꢂ
or
Medium
Select
Video
Exit
Video
Select
Exit
The VIDEO menu includes the following options:
Picture Mode
Contrast
Cycles among display types: Vivid/Hi-Bright/Cinema/Sport/User
Controls the difference between the brightest and darkest regions of
the picture
Brightness
Saturation
Hue
Controls the overall brightness of the picture
Controls the color intensity
Controls the difference between the green and red regions of the
picture
Sharpness
Increase this setting to see crisp edges in the picture; decrease it for
soft edges
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Color temperature
Adjusts color components independently to achieve a warm or cool
effect: Cool/Middle/Warm/User
▪ Warm: Increases red tint
▪ Nature : Increases natural tint
▪ Cool :
Increases blue tint
▪ User : Allows the user to adjust red, green and blue color
component levels independently.
Color Temperature
R Gain
User
ꢀ20
ꢀ20
ꢀ20
G Gain
B Gain
Color Temperature
Select
Back
Noise Reduction
VGA
Select to reduce the noise level of connected equipment: Off/Low/
Strong /Medium.
Press the OK button to enter the VGA Setting:
Auto Adjust
H.Position
V. Position
Clock
ꢄ2
3ꢀ
ꢀ2ꢄ
3ꢀ
Phase
VGA
Select
Exit
▪ Auto Adjust
Press the OK button to automatically adjust the display
setting to optimize performance based on the VGA
mode
▪
▪
▪
▪
H. Position
Adjusts the position of the picture left and right in the
window
V. Position
Clock
Adjusts the position of the picture up and down in the
window
Controls the width of the picture based on the VGA
mode
Phase
Controls the signal phase, which can improve focus
clarity and image stability based on the VGA mode
3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Customizing the AUDIO Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the AUDIO.
Use the ▲▼buttons to highlight an individual AUDIO option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu
▪
If the signal source is VIDEO/S-VIDEO/Ypbpr/
HDMI/VGA, the AUDIO MENU appears as:
▪ if the signal source is TV, the AUDIO MENU
appears as:
Bass
ꢂ0
ꢂ0
0
Bass
ꢂ0
Treble
Treble
ꢂ0
0
Balance
Sound Effect
Speaker
Audio Out
Balance
Surround
On
Sound Effect
MTS
Surround
Stereo
or
Variable
SPDIF Type
Audio Language
Speaker
Dolby Digital
English
On
Audio Out
Variable
Audio
Select
Exit
Audio
Select
Exit
The AUDIO menu includes the following options:
Bass
Controls the relative intensity of lower-pitched sounds
Controls the relative intensity of higher pitched sounds
Treble
Balance
Adjusts the relative volume of the speakers in a multiple speaker system
Sound Effect
Allows selection of an audio-enhancement technique from among the
following options: Surround/Live/Dance/Techno/Classic/Soft/Rock/POP/
Off
MTS
Allows you to listen to high-fidelity stereo sound while watching TV
▪ Stereo:
Use separate audio tracks for left and right speakers, if available
▪ SAP:
You can enjoy a second audio program from the speakers while
watching a scene in the original program
▪ Mono:
Allows mono output (useful when stereo is noisy or inconsistent)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
SPDIF Type
Allows to selection of the digital sound format: PCM/OFF/Dolby
Digital
▪
▪
▪
PCM:
The external audio system is connected to the AUDIO OUT (L/R)
of the LCD TV
Dolby Digital:
The external audio system is connected to the AUDIO OUT
DIGITAL (OPTICAL or COAXIAL) ot the LCD TV
OFF:
Select OFF to turn off the external audio system
Audio Language
Allows to select the audio language:English/Spanish/French.
Allows to select to turn on or off the TV speakers.
Speaker
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Customizing the TV Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the TV.
Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons
changes the setting, and press the MENU exits the menu.
Channel Scan
Tuner Mode
Channel Skip
Favorite List
Time Zone
Cable
Eastern Time
TV
Select
Exit
The TV menu includes the following options:
Channel Scan
Tuner Mode
Press the OK button, the Channel Scanning automatically creates a
list of receivable channels.
Allows selection between TV cable and antenna signal sources:
▪ AIR
Choose this setting if you are receiving TV channels with an antenna
(over the air)
▪ Cable
Choose this setting if you are receiving TV channels with a CATV
(cable TV)
Channel Skip
Allows addition/removal of channels on the channel list.
Press the OK button to display the Channel Skip menu:
2
3
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
ABC
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
DISC
ꢀ0
Channel Skip
Select
Back
3ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Press the ▼ button to select the desired channel, and press the
OK button repeatedly to select show () or hide()
Favorite List
Select Favorite List from the TV option and press the OK
button. The Favorite List menu appears:
2
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
3
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
ꢀ0
Favorite List
Select
Back
Press the ▼ button to select the desired channel, and press
the OK button repeatedly to select show () or hide()
Time Zone
Allows selection of regional TV systems of USA: Eastern Time/
Indiana/Central time/Mountain Time/Arizona/Pacific Time/
Alaska/Hawaii
3ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Customizing the SETUP Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the SETUP.
Use the ▲▼buttons to highlight an individual SETUP option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu.
▪
If the signal source is TV/VIDEO/S-VIDEO/Ypbpr,
the SETUP MENU appears as:
▪ if the signal source is HDMI/VGA, the SETUP
MENU appears as:
OSD Language
Time Setup
Closed Caption
Parental
English
Middle
OSD Language
Time Setup
Parental
English
Middle
Gamma
Gamma
Reset Default
Reset Default
Setup
Select
Exit
Setup
Select
Exit
The SETUP menu includes the following options:
OSD Language
Time Setup
Selects to display all on-screen menus in your language of choice:
English/French/Spanish
Allows to set the current time.
▪
ON :Selects to display the system current time.
▪
OFF :Selects to set the current time.
Press the ▲▼ buttons to select the Date or Time.
Press the ◄► buttons to move each setting, and use 0-9 keys
to set the current time.
Analog Cloaed Caption
Digital Cloaed Caption
Digital Caption Style
Off
Off
Timer
Select
Back
3ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Closed Caption
Allows to select from analog or digital closed caption modes and press
the OK button. The Closed Caption list appears:
Analog Closed Caption:
Press the ◄► buttons to select the basic analog closed caption
options:
▪
▪
▪
CCꢀ /CC2 /CC3 /CCꢁ:
Display a printed version of the dialog and sound effects of the
program being viewed
Tꢀ/T2:
Display station information presented using either half or the whole
screen
T3/Tꢁ:
Extended Data Services. For example: Network name, program
name, program length, etc.
Digital Closed Caption:
Press the◄►buttons to select the digital closed caption options:
Service1/Service2/Service3/Service4/Service5/Service6/OFF
Note: The setting here will be applied to each DTV channel
Caption Style:
Press OK button to customize the settings for digital closed caption
option:
Caption Style
Font Size
Custom
Large
Font Color
White
Font Opacity
Solid
Background Color
Background Opacity
Window Color
Window Opacity
Black
Solid
Black
Translucent
Cloaed Caption Style
Select
Back
3ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Parental
The Parental Control can be set up to the TV to block Channel,
Video Source and to change password.
Use the ▼ button to select the Parental, and press the OK
to display the Parental menu
Use the Program Block function, must enter a four-digit
password. The factory password is 0000
The Parental list appears:
Program Block
Channel Block
Input Block
Change Password
Parental
Enter
Select
Back
.
Program Block
Allows to setup the TV and MPAA Rating Lock options (refer to
“Using the Program Block Setting”).
U.S.TV Ratings
U.S. Movie Ratings
Canadian English Ratings
Canadian French Ratings
Block MPAA Unrated
Block TV Unrated
NO
NO
Parental Block
Select
Back
.
Channel Block
Allows to block digital channels.
Press the ▲▼ buttons to select the channel.
Press the OK button repeatedly to select BLOCK or
UNBLOCK
.
2
3
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
ABC
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
DISC
ꢀ0
Channel Block
Select
Back
3ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
.
Input Block
Selects to block a Input source signal
ꢀ
2
3
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
TV(CABLE/AIR)
VIDEOꢀ (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEOꢁ (YPbPrꢀ)
VIDEOꢂ (YPbPr2)
VIDEOꢃ (HDMIꢀ)
VIDEOꢄ(HDMI2)
COMPUTER(VGA)
Input Block
Select
Back
Press the ▲▼ buttons to select the input source.
Press the OK button repeatedly to select BLOCK or
UNBLOCK
.
.
Open V-Chip
Selects to block program based on
downloadable ratings are blocked from
viewing.(this function is only available in U.S.A
. where the Open V-Chip ratings exist)
Press the OK button to display the Open V-Chip options.
Tumbolia region, alternate US
Parental
Enter
Select
Back
Press the ▲▼buttons to select the downloadable rating system,
and press OK button.
Press the OK button repeatedly to select BLOCK or UNBLOCK.
The Open V-Chip function is automatically downloaded while
watching DTV channels. It may take several seconds. The rating
name( for example: humor level, intelligence level..etc) and
rating level(for example:DH, MH, H..etc) may differ depending on the
information from broadcasting station.
.Change Password
Selects to change your password
Gamma
Allows adjustment of the display’s gamma correction, which fine tunes
both brightness and red/green/blue ratios: Bright/Middle/Dark.
Reset Default
Press the OK button to restore factory settings
3ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Using the Program Block Settings
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the SETUP.
Use the ▼buttons to highlight Parental, and press the OK button.
OSD Language
Closed Caption
Parental
English
Middle
Gamma
Reset Default
Setup
Select
Exit
Use the Parental function, must enter a four-digit password. The factory password is
0000.
Password
****
Program Block
Channel Block
Input Block
Open V-Chip
Change Password
Parental
Select
Back
Parental
Select
Back
Use the ▼ button to select the Program Block, and press the OK to display the
Program Block menu.
U.S.TV Ratings
U.S. Movie Ratings
Canadian English Ratings
Canadian French Ratings
Block MPAA Unrated
Block TV Unrated
NO
NO
Parental Block
Select
Back
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
The Parental block menu includes the following options:
U.S. TV Ratings
Selects to activate the TV Rating programs.
Selects to activate the MPAA Rating programs.
U.S. Movie Ratings
Canadian English Ratings Selects to activate the English Rating programs of Canada.
Canadian French Ratings Selects to activate the French Rating programs of Canada
Block MPAA Unrated
Block TV Unrated
▪ YES:
Block all movies that are broadcast without a MPAA rating.
▪ NO:
Allows all movies that are broadcast without a MPAA rating
▪ YES:
Block all movies that are broadcast without a TV rating.
▪ NO:
Allows all movies that are broadcast without a TV rating.
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
U.S. TV Ratings
The U.S.TV Rating has 2 rating methods: Content-Based Rating and Age-Based Rating.
The U.S.TV Rating includes the following options:
A
D
L
S
V
FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Allowed Rating
Blocked Rating
U.S. TV Ratings
Select
Back
AGE-BASED
RATING
TV-Y
DESCRIPTION
All children
TV-Yꢄ
Directed to children age 7 and older
General Audience
TV-G
TV-PG
TV-ꢀꢁ
Parental Guidance suggested
Parents strongly cautioned
Mature Audience only
TV-MA
CONTENT-BASED
RATING
DESCRIPTION
FV
D
Fantasy violence
Suggestive dialogue
Strong language
Sexual situations
Violence
L
S
V
ALL
All contents are blocked
CONTENT-BASED
L
FV
D
S
V
TV-Y
TV-Yꢄ
TV-G
TV-PG
TV-ꢀꢁ
TV-MA
: To block programs by both content and age.
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to
select BLOCK or UNBLOCK
.
ꢁ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
U.S. Movie Ratings
The U.S. Movie Ratings is used for original movies rated by the Motion Picture Association of
America(MPAA) as broadcasted on cable TV and not edited for television.
The U.S. Movie Ratings includes the following options:
G
PG
PG-13
R
NC-17
X
Allowed Rating
Blocked Rating
U.S. Movie Ratings
Select
Back
RATING
DESCRIPTION
G
General Audiences. Movie is appropriate for all ages
PG
Parental Guidance Suggested. May contain material not suited for younger
viewers
PG-ꢀ3
R
Contains content that may not be appropriate for viewers under the age of
13
Restricted. Contains adult content, no one under 17 admitted without
parent
NC-ꢀꢄ
X
No one 17 and under admitted
No one 17 and under admitted
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to
select BLOCK or UNBLOCK
.
Open V-Chip Allows to setup the TV and MPAA Rating Lock options (referto "Using
the V-CHIP Setting")
ꢁ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Canadian English Ratings
The Canadian English Ratings includes the following options:
C
C8+
G
PG
14+
18+
Allowed Rating
Blocked Rating
Canadian English Ratings
Select
Back
RATING
DESCRIPTION
C
All children
Cꢅ+
G
Children 8 years and older
General programming
Parental guidance
Viewers 14 and older
Adult programming
PG
ꢀꢁ+
ꢀꢅ+
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to
select BLOCK or UNBLOCK
.
Canadian French Ratings
The Canadian French Ratings includes the following options:
G
8 ans+
13 ans+
16 ans+
18 ans+
Allowed Rating
Blocked Rating
Canadian French Ratings
Select
Back
RATING
DESCRIPTION
G
General programming
ꢅ ans+
ꢀ3 ans+
ꢀꢃ ans+
ꢀꢅ ans+
Not recommended for ages under 8
Not recommended for ages under 13
Not recommended for ages under 16
Programming restricted to adults.
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to
select BLOCK or UNBLOCK
.
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Program Guide
Using the Program Guide
The Program Guide feature brings all sorts of information to your screen, such as program title,
program duration, time remaining, rating information, closed caption, availability, etc.
With the LCD TV connected to a television programming source, press the TV button on
the remote control.
Press the GUIDE button on the remote control, the Program Guide will appear on the
screen:
Monday ꢃ November 200ꢃ 2:3ꢃ:2ꢃ PM
ꢆ-ꢀ
ꢆ-2 KQED-SD
Calfornia’s Gold
ꢆ-ꢀ
CC
Antiques Roadshow
TThe NewHour with Jim LehrerCC
TodZoboomafoo
CC
Arthur
ꢂ:00 PM - ꢂ:30 PM Mon, 2ꢆ Apr
Clubs: Dongwa doesn’t communicate with his
parents.
Not Rated
Eplisode: Explorer’s club/Time for everything
Press the ◄► button to select the channel.
Press the ▲▼ button to select the program from a list, the Program Guide provides
introduction about the current program being shown on each channel.
The Program information in the guide is provided by the broadcasters. It may sometimes
include only the channel number, without a program title or description.
Monday ꢃ November 200ꢃ 2:3ꢃ:2ꢃ PM
ꢆ-ꢀ
ꢆ-2 KQED-SD
Calfornia’s Gold
ꢆ-ꢀ
CC
Antiques Roadshow
TThe NewHour with Jim LehrerCC
TodZoboomafoo
CC
Arthur
ꢂ:00 PM - ꢂ:30 PM Mon, 2ꢆ Apr
Clubs: Dongwa doesn’t communicate with his
parents.
Not Rated
Eplisode: Explorer’s club/Time for everything
Press the GUIDE button again on the remote control to exit the Program Guide
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
TROUBLESHOOTING
Before consulting service personnel, check the following chart for a possible
cause of the trouble and for a possible solution.
TV will not turn on
Make sure the power cord is plugged in, then press the
The batteries in the remote control may be exhausted.
Replace the batteries.
button on the remote.
No picture, no sound
Check the interface cable between TV and antenna/cable TV.
Press the button on the remote.
Press the INPUT button on the remote repeatedly to select the connected video
sources.
Poor picture, sound OK
Check the interface cable between TV and antenna/cable TV.
Try another channel, the station may have broadcast difficulties.
Adjust the Brightness/Contrast options in the PICTURE Menu.
Picture OK, poor sound
Sound may be muted. Press the MUTE button on the remote.
Press the TV button on the remote, then press the VOL+ button to increase the
volume.
Audio noise
Move any infrared equipment away from the TV.
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SPECIFICATIONS
MODEL
MLT3221
LCD Panel
Panel Size
32 TFT LCD
Max. Resolution
Input Connector
1366x768
VIDEO/AUDIO(L/R)
S-Video/AUDIO(L/R)
YPbPr/AUDIO(L/R)
VGA/AUDIO(L/R)
HDMI/AUDIO(L/R)
AUDIO OUT(L/R)
OPTICAL/COAXIAL
HEADPHONE
2
1
2
1
2
1
1
1
Power Source
Power Consumption
Dimension
100-240V~, 50/60HZ, 2.2A
150 W, standby < 3 W
805 x 246 x 634.9 mm
33.2 lbs
WEIGHT
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The
finish on the unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when
cleaning and wiping the plastic parts. Mild soap and a soft, damp cloth may be used.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR
WEBSITE AT WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER
SERVICE AT ꢀ-ꢅ00-ꢆꢀꢆ-3ꢃꢁꢄ
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST ꢆ0 DAYS IN CASE YOU
NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR TO IMATION
ELECTRONICS PRODUCTS.
FOR CONSUMER REPLACEABLE PART(S),SEE PART NUMBER(S)ON PAGE ꢃ AND
THEN CONTACT FOX INTERNATIONAL AT ꢀ-ꢅ00-32ꢀ-ꢃꢆꢆ3.
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Imation Electronics Products,
A Division of Imation Enterprises Corp., Weston, Florida
Memorex, the Memorex logo, and “Is it live or is it Memorex?”
are trademarks of the affiliates of Memorex Products, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|