MVD2037
User’s Guide
DVD/VCD/MP3/PHOTO CD Player
Before operating this product,
pleaseDrowenlaoadd frotmhWewws.Seomainnuasls.ctormu. Acll Mtainouanls SsearcchoAnmd Dopwnlleoadt.ely.
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
FCC NOTICE:
CAUTION:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A
LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT,
PLEASE READ THIS OWNER’S MANUAL CAREFULLY
AND RETAIN FOR FUTURE REFERENCE. SHOULD
THE UNIT REQUIRE MAINTENANCE, CONTACT AN
AUTHORIZED SERVICE LOCATION-SEE SERVICE
PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
TO PREVENT DIRECT EXPOSURE TO LASER BEAM,
DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE
LASER RADIATION MAY BE PRESENT WHEN THE
ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
WARNING:
•
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
Consult the dealer or an experienced radio/TV
technician for help.
WARNING:
FCC CAUTION:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.
To assure continued compliance, follow the attached
installation instructions and use only shielded cables
when connecting to other devices. Also, any changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s authority
to operate the equipment.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC
connection. Lightning and power surges ARE NOT
covered under warranty for this product.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
IMPORTANT:
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS
PRODUCT TO YOUR PLACE OF PURCHASE OR TO MEMOREX.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general
precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to
an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the product's manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water-for example: near a bathtub, washbowl, kitchen sink, or laundry tub;
in a wet basement; or near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
13. LIGHTNING
To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70,
provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to
grounding electrodes, and requirements for grounding electrode.
18. SERVICING
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance-this indicates a need for service.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
NOTES ON HANDLING:
TO OBTAIN A CLEAR PICTURE:
The DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality becomes poor. To obtain a
clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every 1,000
hours of use depending on the operating environment.
For details, contact your nearest dealer.
•
When shipping the DVD player, always use the
original shipping carton and packing materials. For
maximum protection, repack the unit as it was
originally packed at the factory.
•
Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic
products in contact with the DVD player for a long
time. They will leave marks on the finish.
NOTES ON MOISTURE CONDENSATION:
•
•
The top and rear panels of the DVD player may
become warm after a long period of use. This is
normal and not a malfunction.
Moisture condensation damages the DVD player.
Please read the following carefully.
When the DVD player is not in use, be sure to remove
the disc and turn off the power.
• Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens inside
this unit, one of the most crucial internal parts of the DVD
player.
• If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.
Moisture Condensation occurs during the following
cases:
NOTES ON LOCATING THE DVD PLAYER:
•
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, move the DVD
player away from the TV, radio, or VCR.
•When you bring the DVD player directly from a cold
place to a warm place.
•When you use the DVD player in a room where you just
turned on the heater, or a place where the cold wind from
the air conditioner directly hits the unit.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
•In summer, when you use the DVD player in a hot and
humid place just after you moved the unit from an air
conditioned room.
•
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
and benzine, as they may damage the surface of the
DVD player.
•When you use the DVD player in a humid place.
Do not use the DVD player when moisture
condensation may occur.
• If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player and leave it “ON” for two
or three hours. After two or three hours, the DVD player
will have warmed up and evaporated any moisture. Keep
the DVD player connected to the wall outlet and moisture
condensation will seldom occur.
•
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Warning: Cleaning and adjustment of lenses and/or
other components of playback mechanism should be
performed by a qualified service technician.
POWER SOURCE
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V,
60Hz.
NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut
the wide blade. It is the user’s responsibility to have an electrician replace the obsolete
outlet.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
FRONT
1
2 3
4
5 6
7
8
9 10
11
1
1. Power ON Backlight
2. STANDBY Indicator
3. STANDBY Button
4. Disc Tray
7. SKIP ( ) and ( ) Buttons
8. PAUSE ( ) Button
9. Display
10. STOP (■) Button
5. OPEN/CLOSE Button
6. Remote Sensor
Š
11. PLAY ( ) Button
REAR
1
2
3
4
5
6
7
1. Stereo Audio Left/Right Output Jacks
2. Video Output Jack
3. S-Video Output Jack
4. Coaxial Digital Audio Output Jack
5. Component Video (Y, PB, PR) Output Jacks
6. PROGRESSIVE SCAN ON/OFF Switch
7. AC Power Cord
6
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS (CONTINUED)
REMOTE
1. DISPLAY Button
2. MUTE Button
3. REPEAT Button
4. RANDOM Button
5. SLOW/F Button
6. SLOW/R Button
Š
7. PLAY ( ) Button
22
23
24
25
26
27
1
2
3
4
5
6
7
8
8. PAUSE/STEP Button
9. SKIP ( ) Button
10. Navigation (›) Button
11. ENTER Button
12. Navigation (¥) Button
13. Navigation (‚) Button
14. RETURN Button
28
9
29
15. TITLE MENU Button
16. DVD MENU Button
17. ANGLE Button
10
11
12
30
31
18. 3D Button
19. PBC Button
13
14
20. SEARCH Button
21. Number (0–9) Buttons
22. OPEN/CLOSE Button
23. STANDBY ON/OFF Button
24. Repeat A-B Button
25. PROGRAM Button
15
16
17
18
19
20
32
33
34
35
¥¥ꢀ
ŠŠꢀ
26. SEARCH
27. SEARCH
Button
Button
28. STOP (■) Button
21
29. SKIP ( ) Button
30. Navigation (Š) Button
31. SETUP Button
36
32. SUBTITLE MENU Button
33. AUDIO MENU Button
34. ZOOM Button
35. AUDIO MODE Button
36. CLEAR Button
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
BATTERY INSTALLATION
1.
Open the battery compartment cover by pushing in on the tab and
lifting it out.
2. Install two (2) “AA” batteries (not included), paying attention to the
polarity diagram in the battery compartment.
3. Replace the battery compartment cover.
+
–
+
–
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
NOTES:
• When there is an obstacle
between the DVD and the
transmitter, the transmitter may
not operate.
• When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
shines on the REMOTE
SENSOR of the DVD, the
remote operation may be
20ft
unstable.
45
45
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION
CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
To
To
Video In
Audio In
Audio Cable (Included)
Video Cable (Included)
From
Audio
Out
From
Video Out
CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK
To
Audio In
To S-Video In
Audio Cable (Included)
S-Video Cable (Not Included)
From
From
Audio
S-Video
Out
Out
NOTES FOR CONNECTING TO A TV:
•
•
•
•
•
•
If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.
Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
•
•
Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.
After connecting, press the AUDIO MODE button to the desired audio setting. (Please refer to ‘AUDIO MODE’ on page
20.)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A TV USING THE Y/PB/PR JACKS
To
Component
Video In
Y
PB
PR
To
Audio In
Audio Cable (Included)
Component Cable
(Not Included)
From
Audio
Out
From
Component
Video Out
NOTES FOR CONNECTING TO A TV:
•
•
•
•
•
TV must have Y, PB and PR input jacks.
Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
Set the VIDEO OUT Option (on the GENERAL Menu Page) to YUV if using the component Video Out jacks.
When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any
connections.
•
•
Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
If using a TV with a blue screen option, turn the option off, on the TV for best results.
PROGRESSIVE (Y, PB, PR) VIDEO OUT:
Use these jacks to connect to a TV with progressive video input jacks, set the PROGRESSIVE SCAN switch to ON.
Progressive scan is a video scanning system that displays all lines in a frame in one pass, as opposed to the traditional
system, interlaced scan. This connection provides optimum quality. To ensure maximum picture quality, use three video-
grade cables for connections. Note that it is essential to match the color-coded connectors with a compatible TV.
525 LINE DIGITAL PROGRESSIVE-SCAN COMPONENT VIDEO OUTPUT
Compared to standard interlaced video, progressive scan effectively doubles the amount of video information fed to your TV
or monitor. The result is a stable, flicker-free image. (Check your TV/monitor for compatibility with this feature.)
For the very highest picture quality, try watching a movie on DVD-Video on a progressive-scan compatible TV.
NOTES:
•
If you connect a TV that is not compatible with a progressive scan signal and set the PROGRESSIVE SCAN switch is
in the ON position, you will not be able to see any picture at all. To regain the picture, you must shut the unit off and set
the PROGRESSIVE SCAN switch to the OFF position. Then, turn the unit on and the picture will appear.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SET THE PROGRESSIVE
SCAN SWITCH TO “OFF”.
•
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A HOME THEATRE SYSTEM
From
Digital Out
From
Video Out
Coaxial Cable (Not Included)
Video Cable (Included)
To Digital
Audio Input
9
To Video
Input
Place the subwoofer, front, rear and center
speakers in locations as shown/described
here. After correctly positioning the speakers,
perform the Tone Test on the AV Amplifier and
adjust the volume controls until the desired
sound is achieved. For best results, sit in the
viewing position and have someone adjust the
volumes for you; this will enable you to set the
optimal levels.
3
1
2
5
4
NOTE: To avoid scratching the furniture, place
felt pads (not included) to the bottom of each
speaker.
NOTE:
•
The rear speakers can also be located on
the side wall facing the viewing position and
each other. Make sure the viewing position
is located between the 2 speakers in this
case. Experiment to find optimal position.
6
7
8
1. Front Left Speaker
2. Television
6. Viewing/Listening Position-The best listening position
is obtained by positioning the chair, sofa, etc. in the
middle of all the speakers.
3. Center Speaker-can be located on top or below the
7. Rear Left Speaker
Television.
8. Rear Right Speaker
4. Sub–woofer-can be located anywhere in the room.
9. AV Amplifier w/ Dolby Digital Decoder/DTS Decoder
5. Front Right Speaker
NOTES FOR CONNECTING TO A TV:
•
If your TV has a Component input, connect the DVD player with the component cable for best results, otherwise use the
S-Video or Video Out jack on the DVD player.
•
•
•
•
Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
When connecting the DVD, refer to the owner’s manual for the TV and the audio system, as well as this manual.
When connecting, make sure the power is off and all units are unplugged before making any connections.
Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
•
•
If using a TV with a blue screen option, turn the option off, on the TV for best results.
If you place the DVD player near a tuner, the radio broadcast sound might be distorted. In this case, move the DVD
player away from the tuner.
•
After connecting, press the AUDIO MODE button to the desired audio setting. (Please refer to ‘AUDIO MODE’ on page
20.)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT DISCS
The region number for this DVD Player is:
See the following page for information regarding region numbers.
1
PLAYABLE DISCS:
The following discs can be played back on this DVD player:
KODAK PICTURE CD
AUDIO CDs
When playing an MP3, the total number of files will appear in the display, and the TV screen will list the folders/tracks.
MP3
MP3 is the abbreviation of “MPEG1 Audio Layer 3”. MPEG Audio is a format that compresses the audio portion only.
IMPORTANT NOTES:
Due to many variables, including recording condition, type of disc, writing software, etc., this unit does not guarantee
playback of all MP3 discs.
DISC TYPES:
DVD
Title 1
Title 2
Data on most DVDs is divided into sections called “titles”
and then into subsections called “chapters”, each of which
is given a title or chapter number. Some features of this
DVD player will not operate with some DVD discs as they
are preset. If a function you selected does not run as
desired, refer to the manual accompanying the DVD disc.
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
AUDIO CD
Data on an audio CD is divided into sections called “tracks”,
each of which is given a track number.
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6
KODAK PICTURE CD
Data on a Kodak picture CD is usually not divided into
separate folders, they should appear in the root directory.
IMPORTANT:
It is important that you read the manual that accompanies the DVD disc, as there are features that are
on the DVD player that cannot be used with certain DVDs. There are also extra features on the DVD
disc that are different for each DVD disc, so they are not explained in this owner’s manual.
This player conforms to the NTSC and PAL color systems. However, if you are in
the USA, leave this setting on NTSC. If incorrectly set to PAL, the TV picture will
roll vertically. In this case, simply turn the DVD off, and then back on.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT DISCS (CONTINUED)
Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted
material without permission. DVD video discs are copy protected, and any recordings made from these
discs will be distorted. This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only, unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Region Management Information:
This DVD Player is designed and manufactured to respond to the Region Management Information that
is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to
the Region number of this DVD player, this DVD player cannot play that disc. You may not be able to
play back some DVD video discs on this player if they were purchased from outside your geographic
area or made for business purposes. When you try to play back an unauthorized disc, "Wrong Region"
appears on the TV screen.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU
The setup menu lets you customize the DVD player by allowing you to select
various language preferences, set up a parental level, turn captions and screen
saver on and off, adjust what type of television screen you have and more.
Below, find the menu, and then find the corresponding page that describes the
features of the selected menu option.
1. Press the SETUP button ❶ to enter the Setup Menu.
Dolby
2. Select one of the Setup icons (
) at the top of the screen using
2
the Navigation (¥,Š) buttons ❷, then press the Navigation (‚) button ❷ to
select it.
3. Use the Navigation (›,‚) buttons ❷ to select one of the setup options, then
press the Navigation (Š) button ❷ to select it.
1
4. Use the Navigation (›,‚) buttons ❷ to select the desired setting, then press
the ENTER button ❸ to make the change. Press the Navigation (¥) button ❷
repeatedly to return to the Setup icons or press the SETUP button ❶ to exit
setup.
Dolby
- - General Setup Page - -
Page 15
TV Displayꢀ
TV Typeꢀ
Video Out
Angle Markꢀ
OSD Langꢀ
Captionsꢀ
PS
NTSC
Page 15
Page 15
Page 15
Page 15
Page 16
Page 16
ON
ENG
OFF
ON
Screen Saverꢀ
Go To General Setup Page
Dolby
- - Speaker Setup Page - -
Downmix
Page 16
Dolby
Go To Speaker Setup Page
Dolby
- - Dolby Setup Page - -
Dynamic
Page 17
Exit Setup Menu
Select the Exit icon, then press the
ENTER button to exit the Setup menu
Go To Dolby Digital Page
Dolby
- - Preference Page - -
Audioꢀ
Subtitleꢀ
Disc Menuꢀ
Parental
Password
Default
ENG
ENG
ENG
Page 17
Page 17
Page 18
Page 18
Page 19
Page 19
Go To Preference Page
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
GENERAL SETUP MENU:
Select GENERAL SETUP ( ) using the Navigation (¥,Š) buttons, then select/change the setup option as described on
page 14.
TV DISPLAY
TV TYPE
1
1
Dolby
Dolby
- - General Setup Page - -
- - General Setup Page - -
TV Displayꢀ
TV Typeꢀ
Video Out
Angle Markꢀ
OSD Langꢀ
Captionsꢀ
PS
NTSC
Normal/PS
Normal/LB
Wide
TV Displayꢀ
TV Typeꢀ
Video Out
Angle Markꢀ
OSD Langꢀ
Captionsꢀ
PS
NTSC
NTSC
PAL
ON
ON
ENG
OFF
ON
ENG
OFF
ON
Screen Saverꢀ
Screen Saverꢀ
Set TV Display Mode
Set TV Standard
PAN SCAN: Select when the unit is connected to a NTSC: Select when using an NTSC TV.
conventional TV. Video material formatted in the Pan Scan style
is played back in that style (the left and right edges are cut off).
LETTER BOX: Select when the unit is connected to a
normal TV. Wide-screen images are shown on the screen
with a black band at the top or bottom.
PAL: Select when using a PAL TV.
IMPORTANT: In the USA, the standard is NTSC. When the
DVD player is turned on, it will be set to NTSC.
WIDE 16:9: Select when the unit is connected to a wide-screen TV.
VIDEO OUT (Color Video Connector Type)
ANGLE MARK
1
1
Dolby
Dolby
- - General Setup Page - -
- - General Setup Page - -
TV Displayꢀ
TV Typeꢀ
PS
NTSC
TV Displayꢀ
TV Typeꢀ
PS
NTSC
Video Out
Angle Markꢀ
OSD Langꢀ
Captionsꢀ
Video Out
Angle Markꢀ
OSD Langꢀ
Captionsꢀ
S-Video
YUV
On
Off
ON
ON
ENG
OFF
ON
ENG
OFF
ON
Screen Saverꢀ
Screen Saverꢀ
Set Video Output
Set Angle Mark
The Angle mark setting will only work if this feature is included
on the DVD. Select ON, “ ” will appear when a scene with
different angles is playing. Select OFF to turn Angle mark off.
Select the color video type to fit your connector type:
S-VIDEO: Select when using S-Video and Video Out.
YUV: Select when using Component and Video Out.
OSD LANGUAGE
1
Dolby
- - General Setup Page - -
TV Displayꢀ
TV Typeꢀ
PS
NTSC
Video Out
Angle Markꢀ
OSD Langꢀ
Captionsꢀ
ON
ENG
OFF
ON
English
Spanish
German
French
Screen Saverꢀ
Set OSD Language
Select the desired language (ENGLISH, SPANISH, GERMAN,
FRENCH) for the On-Screen display to display text. Note that
the DVD must have the language included in order to display
it.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
CAPTIONS
SCREEN SAVER
1
1
Dolby
Dolby
- - General Setup Page - -
- - General Setup Page - -
TV Displayꢀ PS
TV Displayꢀ
TV Typeꢀ
PS
NTSC
TV Typeꢀ
NTSC
Video Out
Angle Markꢀ
OSD Langꢀ
Captionsꢀ
Video Out
Angle Markꢀ
OSD Langꢀ
Captionsꢀ
ON
ON
ENG
OFF
ON
ENG
OFF
ON
On
Off
On
Off
Screen Saverꢀ
Screen Saverꢀ
Closed Caption
Screen Saver
When this option is set to ON, captions will appear on the When this option is set to ON, the screen saver will come on
screen for the hearing impaired.
When this option is set to OFF, captions will NOT appear on
the screen.
when the unit stops or the image is paused for
approximately one minute.
When this option is OFF, the screen saver will not come on.
SPEAKER SETUP MENU
Select SPEAKER SETUP ( ) using the Navigation (¥,Š) buttons, then select/change the setup option as described on
page 14.
DOWNMIX
Sets the Audio Output mode.
1
Dolby
- - Speaker Setup Page - -
LT/RT
Stereo
Downmix
Set Downmix Mode
LT/RT: Select to hear the sound in theatrical downmix
mode.
STEREO: Select to hear the sound in Stereo downmix
mode.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
DOLBY DIGITAL SETUP MENU:
Dolby
Select DOLBY DIGITAL SETUP ( ) using the Navigation (¥,Š) buttons, then select/change the setup option as described
on page 14.
DYNAMIC MODE
1
Dolby
- - Dolby Setup Page - -
Dynamic
FULL
3/4
1/2
1/4
OFF
Dynamic Range Compression
Use to slider to set the Dynamic Range. Set to OFF to turn
Dynamic Range Off.
PREFERENCE SETUP MENU (this menu cannot be accessed if a disc is inserted):
Dolby
Select PREFERENCES SETUP ( ) using the Navigation (¥,Š) buttons, then select/change the setup option as described
on page 14.
AUDIO
SUBTITLE
1
1
Dolby
Dolby
- - Preference Page - -
Audioꢀ
Subtitleꢀ
Disc Menuꢀ
Parental
Password
Default
- - Preference Page - -
Audioꢀ
Subtitleꢀ
Disc Menuꢀ
Parental
Password
Default
English
French
Spanish
German
Japanese
ENG
ENG
ENG
ENG
ENG
ENG
English
French
Spanish
German
Japanese
Off
Preferred Audio Language
Preferred Subtitle Language
Select the language the DVD will be played back in Select the language the Subtitle (OSD) will be in (ENGLISH,
(ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE). FRENCH, SPANISH, GERMAN, JAPANESE). The DVD
The DVD must be recorded in the selected language, must be recorded in the selected language, otherwise the
otherwise the default language of the DVD will be played.
default language of the DVD will be shown.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
DISC MENU
1
Dolby
- - Preference Page - -
Audioꢀ
ENG
Subtitleꢀ
Disc Menuꢀ
Parental
ENG
ENG
English
French
Spanish
German
Japanese
Password
Default
Preferred Menu Language
Select the language the DISC MENU will be in (ENGLISH,
FRENCH, SPANISH, GERMAN, JAPANESE). The DVD’s
DISC MENU must be made in the selected language,
otherwise the default language of the DVD will be shown.
PARENTAL
The Parental option enables parents to prevent their children from watching inappropriate material on a DVD. It reads the
ratings for programming, then denies access to programming if the program’s rating meets the limitations you select. In this
case, the user will have to enter a password.
1
2
Dolby
Dolby
1
- - Preference Page - -
Audio
Subtitle
Disc Menu
Parental
Password
Default
1
2
3
4
5
6
7
8
KID SAF
G
PG
PG 13
PGR
R
NC17
ADULT
ENG
ENG
ENG
Password
1
OK
2
1
Please Enter Old Password
Set Parental Control
2
Press the ENTER button ❶ to select the rating. Input your
password using the Number buttons ❷ (see note below),
then press the ENTER button ❶ again. The desired rating
will then be set, and if DVDs with this new rating or above
are played, the user will require a password.
If an incorrect password is entered, “Old password error” will
appear and you will need to enter the password again.
If you forget your password, contact customer service at the
number listed in the Warranty.
At the SETUP MENU, use the Navigation (›,‚) buttons ❶
to select PARENTAL. Press the Š button ❷ followed by the
(›,‚) buttons ❶ to select the desired rating.
1 (KID SAF): Kid Safe.
6 (R):
Under 17 years
old, Parental
Guidance
2 (G):
All ages.
Parental
Guidance.
3 (PG):
strongly
4 (PG13): Parental
Guidance less
than 13 years old.
5 (PGR): Under 17 years
old, Parental
suggested.
7 (NC17): 17 years old
and above.
8 (ADULT):Adult only.
Guidance
suggested.
NOTE: The default password is 1234.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU (CONTINUED)
PASSWORD
Select this option to change the password. You must know the old password in order to change it. If you have forgotten the
password, call customer service at the number listed in the Warranty.
1
2
Dolby
Dolby
1
- - Preference Page - -
Audioꢀ
Subtitleꢀ
Disc Menuꢀ
Parental
Old Password
New Password
Confirm PWD
ENG
ENG
ENG
1
OK
2
Password
Default
Change
1
Please Enter Old Password
Set Password
2
Press the ENTER button ❶ to select Change the Password.
Input your old password (see note on the bottom of page
18), then the new password and then confirm the new
password using the Number buttons ❷, then press the
ENTER button ❶ again. The desired new password will then
be set, be sure to write it down for future reference.
NOTE: If you input a wrong old password, "Old Password
Error" will appear on the TV screen. In this case, you need
to input the old password again. If you input a wrong
confirm password, "Confirm Password Error" will show on
the TV screen. In this case, you need to input the confirm
password again.
At the SETUP MENU, use the Navigation (›,‚) buttons ❶
to select PASSWORD. Press the Š button ❷ to select
CHANGE.
DEFAULT
Select this option to reset all the preferences (except PASSWORD) to their original factory settings. This is useful to reset
the NTSC System.
1
2
Dolby
- - Preference Page - -
Audioꢀ
ENG
Subtitleꢀ
Disc Menuꢀ
Parental
Password
Default
ENG
ENG
1
2
Reset
1
Load Factory Setting
Press the ENTER button to reset the preferences to their
factory preset settings.
At the SETUP MENU, use the Navigation (›,‚) buttons ❶
to select DEFAULT. Press the Š button ❷ to select RESET.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION (GENERAL)
IMPORTANT:
When “ ” appears while pressing a button, this means that the corresponding
function cannot be performed either on the disc inserted, or in the selected
mode.
3D SOUND
AUDIO MODE (AUDIO CD/VCD ONLY)
While playing an audio CD (not DVD), you can cycle
between the audio modes as follows:
3D audio post-processing will give a multichannel effect
when using only 2 speakers. This only works with discs
encoded with Dolby Pro Logic, Dolby Digital and DTS multi-
channel audio tracks.
1
1
Press the 3D button repeatedly to achieve the highest
quality sound. The following surround effects will appear on
the TV screen when you press the 3D button repeatedly:
Press the AUDIO MODE button to cycle through the audio
modes. The audio modes vary depending on the disc
inserted, but include MONO LEFT, MONO RIGHT, MIX-
MONO, STEREO.
Surround: Rock
Surround: Pop
Surround: Live
Surround: Dance
Surround: Techno
Surround: Classic
Surround: Soft
Surround: Off
“
” will appear if the disc does not support audio mode
changing.
DO NOT USE this feature if connecting to more than two
speakers.
Turn off the TV surround sound and other surround sound
effects when using this surround effect.
If there is no disc in the CD Compartment, this function
cannot be operated.
MUTE
Press the MUTE button once to mute the sound, “MUTE” will appear on the TV screen. Press the MUTE button again to
restore the sound; “MUTE OFF” will appear on the TV screen.
DISPLAY
Each press of the DISPLAY button will display the elapsed time and remaining time of a playing disc. Each press of the
DISPLAY button will cycle through, depending on the playback mode as follows:
NOTE: For MP3, press the
DVD
CD/VCD
DISPLAY button to show
the single remaining time
on the TV screen. Press
again to return to single
elapsed time.
1st press
2nd press
3rd press
4th press
5th press
Title Elapsed Time
Title Remaining Time
Chapter Elapsed Time
Chapter Remaining Time
Display Off
Single Elapsed Time
Single Remaining Time
Total Elapsed Time
Total Remaining Time
Display Off
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD BASIC OPERATION
IMPORTANT NOTES:
•
After plugging in, the unit will be in the Standby mode (the Standby indicator will be lit). Press the STANDBY ON/OFF
button on the main unit or the remote to turn on the unit. As long as you do not press the STANDBY ON/OFF button to
turn the unit off, it will return to Standby mode and the STANDBY indicator will light.
•
•
•
•
“
” will appear on the TV screen during operation if you try to access a function that is not available on the disc.
Some discs may take a few seconds to load.
If a disc is inserted incorrectly; dirty, damaged; or is not present at all, “NO DISC” will appear in the display.
Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side
facing up, align it with the guides and place it in its proper position.
•
It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD
player that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they
are not explained in this owner’s manual.
PLAYBACK OF A DVD
1
2
Press the STANDBY ON/OFF button on the main
unit/remote to turn on the unit; the STANDBY indicator will
go out and the Backlights will turn on.
Press the OPEN/CLOSE button to open the disc tray,
“OPEN” will appear on the screen and in the display. Insert
a disc will the label side facing up on the disc tray.
3
4
1
2
1
2
3
1
Press the OPEN/CLOSE button ❶ to close the disc tray.
“CLOSE” will appear on the screen and in the display. After
loading, “DVD VIDEO” will appear in the display and the
menu screen of the DVD should appear. Use the Navigation
(¥,Š,›,‚) buttons ❷ to select the desired option and
ENTER button ❸ to select it.
To stop playback, press the Stop (■) button ❶; “PRESS
PLAY KEY TO CONTINUE” will appear on the TV screen.
Because the unit will remember where you stopped, simply
press the Play (Š) button ❷ to resume playback where you
left off (resuming playback).
If the Stop (■) button ❶ is pressed twice, the TV screen
If the password is set and the inserted disc is within the
Parental Ratings set, then the Password screen will
appear, prompting you to enter the password.
shows “STOP” and the unit will stop completely.
NOTES:
•
If a MENU appears on the TV screen, press the Navigation (¥,Š,›,‚) buttons to select the desired option/item, then
press the ENTER button. Please make sure to refer to the disc’s jacket or case for additional information.
•
Resuming playback may not work on all discs.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD BASIC OPERATION (CONTINUED)
SKIP
SEARCH
1
1
1
3
2
1
Press the Skip (
) button ❶ to advance the DVD to the
During playback, press either the Search ŠŠꢀ❶ button or
beginning of the next chapter.
Search¥¥ꢀbutton ❷ to move the DVD forward or backward
at double (x2) speed to locate a specific section. Repeatedly
press these buttons and the speed will increase to x4, x8,
x16 and resume normal playback.
Press the Skip (
) button ❷ to move the DVD to the
beginning of the previous chapters.
The DVD will move forward or backward at high speed until
the PLAY (Š) button ❸ is pressed again; normal playback
will resume at that point.
SLOW/R AND SLOW/F
Use this feature to move the DVD in slow motion.
1
2
3
During playback, press either the SLOW/R ❶ or SLOW/F ❷
button to move the DVD forward or backward in slow motion
speeds of 1/2, 1/4, 1/8, 1/16 and resume normal playback.
The sound will be muted.
The player will move forward or backward in slow motion until
the PLAY (Š) button ❸ is pressed again; normal playback will
resume at that point.
PAUSE/STEP
Press the PAUSE/STEP button once ❶ to pause the
picture.
1
Repeatedly press the PAUSE/STEP button ❶ to play the
DVD one frame at a time.
2
1
Press the PLAY (Š) button ❷ to resume normal playback.
If the Screen Saver option (page 16) is set to ON, the
screen saver will appear in approximately one minute.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD BASIC OPERATION (CONTINUED)
TITLE/TIME SEARCH
TITLE/CHAPTER SEARCH
Use this feature to directly go to a specific title and/or time.
Use this feature to directly go to a specific title and/or chapter.
1
1
2
2
2
2
1
1
3
3
Press the SEARCH button ❶ once. Press the Navigation While in the Stop mode, press the SEARCH button ❶ . Press
(¥,Š) buttons ❷ to select the TITLE, then use the Number the Navigation (¥,Š) buttons ❷ to select the TITLE, then
buttons ❸ to select the desired title number (i.e. for number use the Number buttons ❸ to select the desired title number
5, press “0”, “5”). Playback will start immediately.
OR
(i.e. for number 5, press “0”, “5”). Playback will start
immediately.
Press the SEARCH button ❶ again, then press the
Press the Navigation (¥,Š) buttons ❷ to select the
CHAPTER, then use the Number buttons ❸ to select the Navigation (¥,Š) buttons ❷ to select the TIME, then use the
desired chapter number (i.e. for number 2, press “0”, “2”). Number buttons to select the desired time
❸
Playback will start immediately.
(Hour/Minutes/Seconds). Playback will start immediately.
REPEAT PLAYBACK
While playing back a DVD, this unit can repeatedly play
back a chapter or title repeatedly.
A-B REPEAT PLAYBACK
While playing back a DVD, this unit can repeatedly play
back a specific section.
1
1
While in the Playback mode, press the REPEAT button While in the Playback mode, press the Repeat A-B button to
define where you want the section to start. Press the Repeat
A-B button again to define where you would like the section
to end, the unit will then play the selected area continuously.
Press the Repeat A-B button again to cancel A-B Repeat
mode.
once; “
CHAPTER” will appear briefly on the TV screen
and the currently playing Chapter will repeat continuously.
While in the Playback mode, press the REPEAT button a
second time; “
screen and the currently playing Title will repeat
continuously. Press the REPEAT button once more to
cancel Repeat mode; “Off” will appear briefly on the screen.
TITLE” will appear briefly on the TV
NOTES:
• If the Search feature is attempted in the Play mode, you can go to a specific chapter, title or time.
• If you enter a time that exceeds the time limit of the DVD, then “
• Repeat may not work properly with some discs.
” will appear, and you must try again.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD BASIC OPERATION (CONTINUED)
AUDIO MENU
SUBTITLE MENU
1
1
Press the AUDIO MENU button repeatedly to change the Press the SUBTITLE MENU button repeatedly to select a
audio language. This feature is not available on all discs.
subtitle language, and to turn the subtitle menu on/off. This
feature is not available on all discs.
DVD MENU
TITLE MENU
1
1
2
3
2
3
1
1
Press the DVD MENU button ❶, and the Main Menu of the Press the TITLE MENU button ❶, and the Title Menu of the
disc will appear. Use the Navigation (¥,Š,›,‚) buttons ❷ disc will appear. Use the Navigation (¥,Š,›,‚) buttons ❷
to select the desired option, and then press the ENTER to select the desired option, and then press the ENTER
button ❸.
button ❸.
This is not available on all discs.
This is not available on all discs.
ZOOM
ANGLE
The image on the screen can be magnified as follows:
Some discs may contain scenes which have been shot
simultaneously from a number of different camera angles.
This feature only works on discs with more than one camera
angle. The jacket will be marked with “
”.
1
1
2
1
Press the ZOOM button ❶ once during Normal, Slow or Still
playback modes, and the unit will zoom x2. Press once or
twice more and the unit will zoom x3/x4. Use the Navigation
(¥,Š,›,‚) buttons ❷ to move the image on the TV screen.
This is not available on all discs. Press the ZOOM button ❶
once more to cancel the zoom function.
While in the Playback mode, press the ANGLE button; “
”
and the total number of angles will appear on the screen.
Repeatedly press the ANGLE button to select the desired
angle; the angle will change in one to two seconds.
This is not available on all discs.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 BASIC OPERATION
PLAYBACK OF AN MP3 CD
1
2
Press the STANDBY ON/OFF button on the main
unit/remote to turn on the unit; the STANDBY indicator will
go out and the Backlights will turn on.
Press the OPEN/CLOSE button to open the disc tray,
“OPEN” will appear on the screen and in the display. Insert
an MP3 disc with the label side facing up on the disc tray.
3
4
1
3
2
1
2
2
2
Press the OPEN/CLOSE button ❶ to close the disc tray.
“CLOSE” will appear on the screen and the display. After
loading, the FOLDER/TRACK menu will appear on the TV
screen. Press the NAVIGATION (›,‚) button ❷ to select the
desired folder/file.
Press the ENTER button ❶ to confirm. Press the
Navigation (›,‚) button ❷ to select the desired track, then
press the ENTER button ❶ to play the track, Press the
STOP (■) button ❸ to stop playback.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 BASIC OPERATION (CONTINUED)
SELECTING FOLDERS/TRACKS USING THE
SELECTING FOLDER/TRACKS USING THE
SKIP ( ) OR ( ) BUTTON
NUMBER BUTTONS
1
1
During playback, simply press the (
select a track to be played.
) or (
) button to
During playback, press the Number buttons corresponding
to the track numbers to select your desired track, and the
unit will playback the desired track automatically.
REPEAT PLAY
FORWARDŠŠ/REVERSE ¥¥ꢀ
1
1
1
1
2
2
To Repeat play a track/file, simply select the track/file as described on
the previous page, then press the REPEAT button ❶ once; “REPEAT
ONE” will appear on the TV screen and the unit will repeat the
selected track/file continuously until the STOP button ❷ is pressed.
Each press of the SEARCH ŠŠ or ¥¥ꢀbutton ❶ will
increase the search as follows:
1st press:
2nd press:
3rd press:
4th press:
5th press:
x 2
x 4
x 8
x 16
To Repeat play all tracks on an MP3 CD, press the REPEAT button ❶
a second time; “REPEAT FOLDER” will appear on the TV screen and
the unit will repeat the CD continuously until the STOP button ❷ is
pressed.
Resume Normal Playback
Press the PLAY (Š) button ❷ to resume normal playback.
To cancel Repeat play, press the REPEAT button ❶ until “FOLDER”
appears on the TV screen.
MP3 FAQs (Frequently Asked Questions)
Please read before playing an MP3 CD.
What is an MP3 file?
An MP3 file is a computer format that makes a usually large music file into a smaller one which is more convenient to download and
share.
Can I record my own MP3 CDs?
Yes, but you need a CD recorder, which is available from you local computer store.
Where can I find MP3 files?
MP3 files are available all over the internet.
Can this unit read regular music CDs?
Yes it can. However, you cannot mix MP3s and WAV files on the same CD. If you do this, the CD Player will play only the MP3 files.
Can I use the MP3 extension for non-audio data files?
No, this may result in serious malfunction and harmful noise interference.
Can I mix MP3 files with other file types on the CDR?
Yes, but your CD player will ignore those files and read only the MP3 files on the CDR.
Does this unit support subdirectories (subfolders)?
Yes, it can read MP3 files from subfolders.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD BASIC OPERATION
PLAYBACK OF A CD/VCD
1
2
Press the STANDBY ON/OFF button on the main
unit/remote to turn on the unit; the STANDBY indicator will
go out and the Backlights will turn on.
Press the OPEN/CLOSE button to open the disc tray,
“OPEN” will appear on the screen and in the display. Insert
a disc will the label side facing up on the disc tray.
3
4
2
1
To stop playback, press the Stop (■) button ❶; “PRESS
PLAY TO CONTINUE” will appear on the TV screen.
Because the unit will remember where you stopped, simply
press the Play (Š) button ❷ to resume playback where you
left off (resuming playback). If the Stop (■) button ❶ is
pressed twice, the unit will stop completely.
Press the OPEN/CLOSE button to close the disc tray.
“CLOSE” will appear on the screen and in the display. After
loading, playback will start automatically.
SELECTING TRACKS/FILES USING THE
NUMBER BUTTONS
SELECTING TRACKS/FILES USING THE SKIP
(
) OR ( ) BUTTON
1
1
Press the number buttons corresponding to the track
number you would like to play, and the unit will playback the
desired track automatically.
During playback, press the Skip (
select a track to be played.
) or (
) button to
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD BASIC OPERATION (CONTINUED)
REPEAT ONE/ALL PLAY
FORWARDŠŠ/REVERSE ¥¥ꢀ
1
1
1
1
2
2
To Repeat play a track, simply select the track as described
Each press of the SEARCH ŠŠ or ¥¥ꢀbutton ❶ will
on the previous page, then press the REPEAT button ❶
increase the search as follows:
1st press:
2nd press:
3rd press:
4th press:
5th press:
x 2
x 4
x 8
x 16
once; “
TRACK” will appear on the TV screen and the
unit will repeat the selected track continuously until the
STOP (■) button ❷ is pressed.
To Repeat play all tracks on a CD, press the REPEAT
button ❶ a second time; “
screen and the unit will repeat the CD continuously until the
Resume Normal Playback
ALL” will appear on the TV
Press the PLAY (Š) button ❷ to resume normal playback.
STOP (■) button ❷ is pressed.
To cancel Repeat play, press the REPEAT button ❶ until
“Off” appears on the TV screen.
IMPORTANT NOTE ON VCD REPEAT PLAYBACK:
PBC must be Off to use repeat playback with VCDs.
REPEAT A-B PLAY
RANDOM PLAYBACK
1
1
1
2
While playing back a CD, this unit can repeatedly play back
a specific section.
Press the RANDOM button ❶ once and “RANDOM” will
appear on the TV screen. Press the PLAY (Š) button ❷ and
the track will randomly play all the tracks on the CD until all
the tracks have been played or the STOP (■) button ❸ is
pressed. To cancel Random or Shuffle, press the RANDOM
button ❶ until “Off” appears on the TV screen.
While in the Playback mode, press the Repeat A-B button to
define where you want the section to start. Press the Repeat
A-B button again to define where you would like the section
to end, the unit will then play the selected area continuously.
Press the A-B button again to cancel Repeat A-B Repeat
mode.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/VCD BASIC OPERATION (CONTINUED)
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for
playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more
than once. Programmed Playback only works for CDs, it does not work on DVDs or MP3 CDs.
To perform programmed playback, proceed as follows:
1
2
2
1
While in the Stop mode, press the PROGRAM button, the Select the first track to be played back using the Number
Program menu will appear on the TV screen.
buttons ❶. The unit will automatically go to the next track to
allow you to program using the Number buttons. If selecting
more then 10 programs, press the SKIP (
access programs 11 to 20.
) Button ❷ to
3
4
Repeat step 2 until all desired tracks have been Press the STOP (■) button to stop programmed play.
programmed (up to 20). You can repeat a track more than
once if desired.
Press the PLAY (Š) button to begin programmed playback.
Playback will begin on the first track that you programmed
and the player will continue to play all of the tracks that you
programmed in the order in which you programmed them.
TO CANCEL THE PROGRAM FUNCTION:
To cancel the Program function, press the STOP (■) button twice, or press the OPEN/CLOSE button.
PBC (VCD ONLY)
When playing a VCD with PBC function, you can enjoy simple interactive software on your TV.
The PBC Function will activate automatically if the VCD has this function. To turn
off the PBC, press the PBC button ❶ once.
1
2
Press the Skip (
) button ❷ to go to the Track Selection Menu. THE VCD
MUST HAVE THIS MENU.
4
Press the Number buttons ❸ to select the desired track to play. Press the
RETURN button ❹ to return to the Track Selection Menu.
1
Follow the instructions supplied with the disc as the operating procedure may
differ according to the VCD.
3
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE CD BASIC OPERATION
1
2
Press the STANDBY ON/OFF button on the main
unit/remote to turn on the unit; the STANDBY indicator will
go out and the Backlights will turn on.
Press the OPEN/CLOSE button to open the disc tray,
“OPEN” will appear on the screen and in the display. Insert
a picture disc with the label side facing up on the disc tray.
3
4
1
1
2
2
2
3
Press the OPEN/CLOSE button ❶ to close the disc tray.
After 12 pictures, press the STOP (■) button to show the
“CLOSE” will appear on the TV screen. After loading, the picture
demo pictures. Press the Navigation (¥,Š,›,‚) button ❷ to
select the desired picture, then press the ENTER button ❸ to
view it.
will automatically show on the TV screen. Press the Skip (
or ( ) button ❷ to select a picture.
)
OR
Press the Navigation (¥,Š,›,‚) buttons ❷ to select “Prev”
or “Next” icons, then press the ENTER button ❸ to show the
next/previous pages of the demo pictures.
TO STOP PICTURE CD FUNCTION: To stop the picture CD function, simply press the OPEN/CLOSE
button.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Check the following before requesting service:
SYMPTOM
POSSIBLE CAUSE
AC cord unplugged.
POSSIBLE SOLUTION
GENERAL
No power.
Plug in the AC cord to an AC outlet.
Unplug the unit and wait about one to
two hours to allow the player to dry.
This unit cannot play discs, other than
DVD, VCD or standard CDs.
Power on, but unit not functioning
properly.
Condensation has formed.
Wrong type of CD inserted.
Unit needs to be reset.
Press the STANDBY button, then
unplug the power cord. Wait one minute
and then plug the unit back in.
The disc is dirty or inserted incorrectly.
Some features and functions are not
available on all discs.
Clean disc and insert label side-up.
This is normal, try another function.
No picture.
The equipment is not connected properly. Connect the equipment according to
the instructions in this manual.
The INPUT of the TV is not set to receive Select the appropriate video input
the DVD signal output.
mode, usually VIDEO or AV.
The video cables are not securely connected. Connect the video cables securely.
Progressive Scan switch is set to ON.
The connected TV power is off.
Set switch to OFF, see bottom of next page.
Turn the TV on.
No sound.
The equipment is not connected properly. Connect the equipment according to
the instructions in this manual.
The equipment connected with the audio
Select the appropriate audio input
cable is not set to receive the DVD signal mode.
input.
The audio cables are not securely
connected.
Connect the audio cables securely.
The connected receiver’s power is off.
Unit needs to be reset to NTSC.
The disc is dirty.
Turn the audio receiver on.
Turn unit off and then back on to auto set it.
Clean the disc.
Playback picture rolls.
The playback picture is poor.
The Search feature is not working.
Some discs have sections that do not
allow searching.
This is normal on some discs.
The picture is not fitting properly.
The remote control is not working.
Wrong menu option is selected in the
SETUP MENU.
Select the correct TV type (PS, LB, WIDE)
which matches the TV you are using.
Install fresh batteries.
The batteries are weak or dead.
The batteries are not installed properly.
The remote is not aimed at the sensor.
Distance is too far or there is too much
light in the room.
Install batteries according to the diagram.
Aim the remote at the sensor.
Operate within 20ft, or reduce the light
in the room.
There is an obstacle in the path of the
beam.
Move obstacle.
The PREFERENCES menu cannot There is a CD in the disc tray.
be accessed (it is dimmed) in the
Remove the disc from the disc tray, as
there cannot be any disc inserted when
setting the preferences.
SETUP MENU.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE (CONTINUED)
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
DVD
The unit does not start playback.
Rating level set to block the DVD.
Enter your password, and/or change
the rating level.
DVD not inserted, or inserted upside-down. Insert DVD correctly.
A non-playback disc is inserted.
Make sure to insert a DVD; “DVD
VIDEO” will appear in the display.
Place the disc on the disc tray correctly
inside the guide.
The disc is not placed in the guide.
The disc is dirty.
Clean the disc.
Some functions do not operate as
stated.
Some features and functions are not
available on all discs.
This is normal, try another function.
Selected language is not being
shown in the subtitles, or spoken.
If the audio or subtitle language does not This is normal, try another disc.
appear on the disc, then the initial setting
will not be seen/heard.
Subtitles are not working properly.
Angle cannot be changed.
Subtitles appear only when the discs
contain them.
This is normal, try another disc.
Subtitles not turned on.
Turn the subtitles on.
Angles may not be recorded on the disc
(see disc jacket/case), or they may only
be recorded on certain scenes.
Try another disc, or wait for a scene
which allows a different camera angle.
The Rating Level password has
been forgotten.
Call the number listed on the warranty to After receiving the information, reset
get the information to reset the
password.
the password and write it down.
Try another VCD.
VCD (VIDEO CD)
No menu playback.
The VCD inserted does not have the
playback control.
PROGRESSIVE SCAN
No picture.
If you connect a TV that is not compatible
with a progressive scan signal and set
the PROGRESSIVE SCAN switch to
‘ON’, you will not be able to see any
picture.
Slide the PROGRESSIVE SCAN switch
to the OFF position if you set is not
compatible, then turn the unit off and
back on again; the picture should
reappear.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT
1-800-919-3647
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN
THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
Caring for Discs
•
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted
side of the disc.
•
•
Do not attach adhesive tape, stickers, etc. to the disc label.
Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. If
necessary, use a CD cleaning kit.
•
•
If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the disc. Never wipe in circular
motions.
Z
•
•
Discs should be stored in their cases after each use to avoid damage.
Do not expose discs to direct sunlight, high humidity, high temperatures, or dust, etc. Prolonged exposure or extreme
temperatures can warp the disc.
•
Do not stick or write anything on either side of the disc. Sharp writing instruments, or the ink may damage the surface.
Cleaning the unit
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and
wiping the plastic parts.
•
Mild soap and a damp cloth may be used on the front panel.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Power Requirements..........................................................................................................AC120V, 60Hz
Power Consumption .....................................<15W (approx. 5W when set to Standby mode by remote)
Weight............................................................................................................................................5.5 Lbs
Dimensions.............................................................................................17 (L) x 9.75 (W) x 2 (H) inches
Weight and dimensions are approximate.
Signal System ..........................................................................................................................NTSC/PAL
Operating Temperature.........................................................................................................+5° to +35°C
Operating Humidity Range.........................................................................5% to 90% (no condensation)
Discs Played:
DVD-VIDEO Disc
12cm single-sided, single layer
12cm single-sided, dual layer
12cm double-sided, single layer
8cm single-sided, single layer
8cm single-sided, dual layer
8cm double-sided, single layer
COMPACT DISC (VIDEO CD)
12cm disc
8cm disc
Video Output Level ..........................................................................................................................1Vp-p
Audio Output Level.....................................................................................................2Vrms (1KHz, 0dB)
Audio Signal Output Characteristics:
Frequency Responses:
DVD (Linear Audio)......................................................................20Hz-20KHz (48KHz/96KHz sampling)
CD Audio ...............................................................................................................................20Hz-20KHz
S/N Ratio......................................................................................................................................70dB
Wow and Flutter............................................................................................Below Measurable Level
Pickup:
Wavelength................................................................................................................................655nm
Laser Power .............................................................................................................................Class 1
Specifications are subject to change without notice.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|